Go Back
FEB_1006 03.08.23 14:19:56
TextEdit.txt
14:19:17:ST3_hmp4040:INFO: HAMEG,HMP2030,017836163,HW50010002/SW2.30
14:19:17:febtest:INFO: FEB8.2 selected
14:19:17:smx_tester:INFO: Setting Elink clock mode to 160 MHz
14:19:17:febtest:INFO: FEB8.2 selected
14:19:17:smx_tester:INFO: Setting Elink clock mode to 160 MHz
14:19:19:ST3_Shared:INFO: Listo of operators:Oleksandr S.;
14:19:19:ST3_Shared:INFO: Listo of operators:Oleksandr S.; Robert V.;
14:19:56:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:19:56:ST3_Shared:INFO: --------------------------FEB-ASIC--------------------------
14:19:56:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:19:56:febtest:INFO: Tsting FEB with SN 1006
14:19:58:smx_tester:INFO: Scanning setup
14:19:58:elinks:INFO: Disabling clock on downlink 0
14:19:58:elinks:INFO: Disabling clock on downlink 1
14:19:58:elinks:INFO: Disabling clock on downlink 2
14:19:58:elinks:INFO: Disabling clock on downlink 3
14:19:58:elinks:INFO: Disabling clock on downlink 4
14:19:58:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:19:58:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:19:58:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:19:58:elinks:INFO: Disabling clock on downlink 0
14:19:58:elinks:INFO: Disabling clock on downlink 1
14:19:58:elinks:INFO: Disabling clock on downlink 2
14:19:58:elinks:INFO: Disabling clock on downlink 3
14:19:58:elinks:INFO: Disabling clock on downlink 4
14:19:58:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:19:58:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:19:58:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:19:58:elinks:INFO: Disabling clock on downlink 0
14:19:58:elinks:INFO: Disabling clock on downlink 1
14:19:58:elinks:INFO: Disabling clock on downlink 2
14:19:58:elinks:INFO: Disabling clock on downlink 3
14:19:58:elinks:INFO: Disabling clock on downlink 4
14:19:58:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:19:58:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:19:58:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:19:58:elinks:INFO: Disabling clock on downlink 0
14:19:58:elinks:INFO: Disabling clock on downlink 1
14:19:58:elinks:INFO: Disabling clock on downlink 2
14:19:58:elinks:INFO: Disabling clock on downlink 3
14:19:58:elinks:INFO: Disabling clock on downlink 4
14:19:58:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:19:58:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 16
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 17
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 18
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 19
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 20
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 21
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 22
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 23
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 24
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 25
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 26
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 27
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 28
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 29
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 30
14:19:58:setup_element:INFO: SOS detected for group 0, downlink 3, uplink 31
14:19:58:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:19:58:elinks:INFO: Disabling clock on downlink 0
14:19:58:elinks:INFO: Disabling clock on downlink 1
14:19:58:elinks:INFO: Disabling clock on downlink 2
14:19:58:elinks:INFO: Disabling clock on downlink 3
14:19:58:elinks:INFO: Disabling clock on downlink 4
14:19:58:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:19:58:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:19:58:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:19:58:setup_element:INFO: Scanning clock phase
14:19:58:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:19:59:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [3]
14:19:59:setup_element:INFO: Clock phase scan results for group 0, downlink 3
14:19:59:setup_element:INFO: Eye window for uplink 16: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
14:19:59:setup_element:INFO: Eye window for uplink 17: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
14:19:59:setup_element:INFO: Eye window for uplink 18: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
14:19:59:setup_element:INFO: Eye window for uplink 19: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
14:19:59:setup_element:INFO: Eye window for uplink 20: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
14:19:59:setup_element:INFO: Eye window for uplink 21: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
14:19:59:setup_element:INFO: Eye window for uplink 22: ___________________________________________________________________XXXXXX_______
Clock Delay: 29
14:19:59:setup_element:INFO: Eye window for uplink 23: ___________________________________________________________________XXXXXX_______
Clock Delay: 29
14:19:59:setup_element:INFO: Eye window for uplink 24: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
14:19:59:setup_element:INFO: Eye window for uplink 25: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
14:19:59:setup_element:INFO: Eye window for uplink 26: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
14:19:59:setup_element:INFO: Eye window for uplink 27: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
14:19:59:setup_element:INFO: Eye window for uplink 28: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
14:19:59:setup_element:INFO: Eye window for uplink 29: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
14:19:59:setup_element:INFO: Eye window for uplink 30: __________________________________________________________________XXXXXXX_______
Clock Delay: 29
14:19:59:setup_element:INFO: Eye window for uplink 31: __________________________________________________________________XXXXXXX_______
Clock Delay: 29
14:19:59:setup_element:INFO: Setting the clock phase to 30 for group 0, downlink 3
14:19:59:setup_element:INFO: Scanning data phases
14:19:59:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:19:59:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [3]
14:20:04:setup_element:INFO: Data phase scan results for group 0, downlink 3
14:20:04:setup_element:INFO: Eye window for uplink 16: _______________XXXXX____________________
Data delay found: 37
14:20:04:setup_element:INFO: Eye window for uplink 17: ___________XXXXX________________________
Data delay found: 33
14:20:04:setup_element:INFO: Eye window for uplink 18: ___________XXXXX________________________
Data delay found: 33
14:20:04:setup_element:INFO: Eye window for uplink 19: _________XXXXX__________________________
Data delay found: 31
14:20:04:setup_element:INFO: Eye window for uplink 20: _______XXXX_____________________________
Data delay found: 28
14:20:04:setup_element:INFO: Eye window for uplink 21: ____XXXXXX______________________________
Data delay found: 26
14:20:04:setup_element:INFO: Eye window for uplink 22: ____XXXX________________________________
Data delay found: 25
14:20:04:setup_element:INFO: Eye window for uplink 23: _XXXX___________________________________
Data delay found: 22
14:20:04:setup_element:INFO: Eye window for uplink 24: __________________________________XXXXX_
Data delay found: 16
14:20:04:setup_element:INFO: Eye window for uplink 25: XXX__________________________________XXX
Data delay found: 19
14:20:04:setup_element:INFO: Eye window for uplink 26: _________________________________XXXXX__
Data delay found: 15
14:20:04:setup_element:INFO: Eye window for uplink 27: XXX___________________________________XX
Data delay found: 20
14:20:04:setup_element:INFO: Eye window for uplink 28: ___________________________________XXXXX
Data delay found: 17
14:20:04:setup_element:INFO: Eye window for uplink 29: XXX__________________________________XXX
Data delay found: 19
14:20:04:setup_element:INFO: Eye window for uplink 30: __________________________________XXXXX_
Data delay found: 16
14:20:04:setup_element:INFO: Eye window for uplink 31: ________________________________XXXXX___
Data delay found: 14
14:20:04:setup_element:INFO: Setting the data phase to 37 for uplink 16
14:20:04:setup_element:INFO: Setting the data phase to 33 for uplink 17
14:20:04:setup_element:INFO: Setting the data phase to 33 for uplink 18
14:20:04:setup_element:INFO: Setting the data phase to 31 for uplink 19
14:20:04:setup_element:INFO: Setting the data phase to 28 for uplink 20
14:20:04:setup_element:INFO: Setting the data phase to 26 for uplink 21
14:20:04:setup_element:INFO: Setting the data phase to 25 for uplink 22
14:20:04:setup_element:INFO: Setting the data phase to 22 for uplink 23
14:20:04:setup_element:INFO: Setting the data phase to 16 for uplink 24
14:20:04:setup_element:INFO: Setting the data phase to 19 for uplink 25
14:20:04:setup_element:INFO: Setting the data phase to 15 for uplink 26
14:20:04:setup_element:INFO: Setting the data phase to 20 for uplink 27
14:20:04:setup_element:INFO: Setting the data phase to 17 for uplink 28
14:20:04:setup_element:INFO: Setting the data phase to 19 for uplink 29
14:20:04:setup_element:INFO: Setting the data phase to 16 for uplink 30
14:20:04:setup_element:INFO: Setting the data phase to 14 for uplink 31
14:20:04:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 3
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 30
Window Length: 71
Eye Windows:
Uplink 16: ____________________________________________________________________XXXXXXX_____
Uplink 17: ____________________________________________________________________XXXXXXX_____
Uplink 18: ____________________________________________________________________XXXXXXX_____
Uplink 19: ____________________________________________________________________XXXXXXX_____
Uplink 20: ___________________________________________________________________XXXXXXX______
Uplink 21: ___________________________________________________________________XXXXXXX______
Uplink 22: ___________________________________________________________________XXXXXX_______
Uplink 23: ___________________________________________________________________XXXXXX_______
Uplink 24: __________________________________________________________________XXXXXXXX______
Uplink 25: __________________________________________________________________XXXXXXXX______
Uplink 26: __________________________________________________________________XXXXXXXX______
Uplink 27: __________________________________________________________________XXXXXXXX______
Uplink 28: __________________________________________________________________XXXXXXXX______
Uplink 29: __________________________________________________________________XXXXXXXX______
Uplink 30: __________________________________________________________________XXXXXXX_______
Uplink 31: __________________________________________________________________XXXXXXX_______
Data phase characteristics:
Uplink 16:
Optimal Phase: 37
Window Length: 35
Eye Window: _______________XXXXX____________________
Uplink 17:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 18:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 19:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 20:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 21:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 22:
Optimal Phase: 25
Window Length: 36
Eye Window: ____XXXX________________________________
Uplink 23:
Optimal Phase: 22
Window Length: 36
Eye Window: _XXXX___________________________________
Uplink 24:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 25:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 26:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 27:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 28:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 29:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 30:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 31:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
]
14:20:04:setup_element:INFO: Beginning SMX ASICs map scan
14:20:04:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:20:04:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [3]
14:20:04:master:INFO: Setting encoding mode EOS for groups [0], downlinks [3]
14:20:05:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [3]
14:20:05:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:20:05:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 17
14:20:05:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 16
14:20:05:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 24
14:20:05:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 25
14:20:05:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 19
14:20:05:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 18
14:20:05:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 26
14:20:05:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 27
14:20:05:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 21
14:20:05:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 20
14:20:05:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 28
14:20:06:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 29
14:20:06:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 23
14:20:06:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 22
14:20:06:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 30
14:20:06:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 31
14:20:07:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 3
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x1: (ASIC uplink, uplink): (0, 24), (1, 25)
ASIC address 0x2: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x3: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x4: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x5: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x6: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x7: (ASIC uplink, uplink): (0, 30), (1, 31)
Clock Phase Characteristic:
Optimal Phase: 30
Window Length: 71
Eye Windows:
Uplink 16: ____________________________________________________________________XXXXXXX_____
Uplink 17: ____________________________________________________________________XXXXXXX_____
Uplink 18: ____________________________________________________________________XXXXXXX_____
Uplink 19: ____________________________________________________________________XXXXXXX_____
Uplink 20: ___________________________________________________________________XXXXXXX______
Uplink 21: ___________________________________________________________________XXXXXXX______
Uplink 22: ___________________________________________________________________XXXXXX_______
Uplink 23: ___________________________________________________________________XXXXXX_______
Uplink 24: __________________________________________________________________XXXXXXXX______
Uplink 25: __________________________________________________________________XXXXXXXX______
Uplink 26: __________________________________________________________________XXXXXXXX______
Uplink 27: __________________________________________________________________XXXXXXXX______
Uplink 28: __________________________________________________________________XXXXXXXX______
Uplink 29: __________________________________________________________________XXXXXXXX______
Uplink 30: __________________________________________________________________XXXXXXX_______
Uplink 31: __________________________________________________________________XXXXXXX_______
Data phase characteristics:
Uplink 16:
Optimal Phase: 37
Window Length: 35
Eye Window: _______________XXXXX____________________
Uplink 17:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 18:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 19:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 20:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 21:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 22:
Optimal Phase: 25
Window Length: 36
Eye Window: ____XXXX________________________________
Uplink 23:
Optimal Phase: 22
Window Length: 36
Eye Window: _XXXX___________________________________
Uplink 24:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 25:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 26:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 27:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 28:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 29:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 30:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 31:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
14:20:07:setup_element:INFO: Performing Elink synchronization
14:20:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:20:07:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [3]
14:20:07:master:INFO: Setting encoding mode EOS for groups [0], downlinks [3]
14:20:07:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [3]
14:20:07:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 3
14:20:07:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:20:07:ST3_emu:INFO: Number of chips: 8
14:20:07:ST3_emu:INFO: Chip address: 0x0
14:20:07:ST3_emu:INFO: Chip address: 0x1
14:20:08:ST3_emu:INFO: Chip address: 0x2
14:20:08:ST3_emu:INFO: Chip address: 0x3
14:20:08:ST3_emu:INFO: Chip address: 0x4
14:20:08:ST3_emu:INFO: Chip address: 0x5
14:20:08:ST3_emu:INFO: Chip address: 0x6
14:20:08:ST3_emu:INFO: Chip address: 0x7
14:20:08:febtest:INFO: Add. | ASIC-ID | T [C] | Vddm [mV]
14:20:09:febtest:INFO: 0-0 | XA-000-08-002-002-007-099-04 | 28.2 | 1183.3
14:20:09:febtest:INFO: 0-1 | XA-000-08-002-002-007-107-04 | 18.7 | 1224.5
14:20:09:febtest:INFO: 0-2 | XA-000-08-002-002-007-102-04 | 31.4 | 1189.2
14:20:09:febtest:INFO: 0-3 | XA-000-08-002-002-007-106-04 | 21.9 | 1224.5
14:20:10:febtest:INFO: 0-4 | XA-000-08-002-002-007-097-04 | 12.4 | 1253.7
14:20:10:febtest:INFO: 0-5 | XA-000-08-002-002-007-105-04 | 25.1 | 1212.7
14:20:10:febtest:INFO: 0-6 | XA-000-08-002-002-007-100-04 | 3.0 | 1277.1
14:20:10:febtest:INFO: 0-7 | XA-000-08-002-002-007-103-04 | 37.7 | 1153.7
14:20:10:ST3_smx:INFO: PROCESS 1: Configuring AFE with typical values
14:20:14:ST3_smx:INFO: chip: 0-0 21.902970 C 1195.082160 mV
14:20:14:ST3_smx:INFO: PROCESS 2: Checking channel response with internal pulse
14:20:14:ST3_smx:INFO: Electrons
14:20:14:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:20:16:ST3_smx:INFO: ----> Checking Analog response
14:20:16:ST3_smx:INFO: ----> Checking broken channels
14:20:17:ST3_smx:INFO: Total # broken ch: 0
14:20:17:ST3_smx:INFO: List FAST: []
14:20:17:ST3_smx:INFO: List SLOW: []
14:20:17:ST3_smx:INFO: Holes
14:20:17:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:20:19:ST3_smx:INFO: ----> Checking Analog response
14:20:19:ST3_smx:INFO: ----> Checking broken channels
14:20:19:ST3_smx:INFO: Total # broken ch: 0
14:20:19:ST3_smx:INFO: List FAST: []
14:20:19:ST3_smx:INFO: List SLOW: []
14:20:19:febtest:INFO: Add. | ASIC-ID | T [C] | Vddm [mV]
14:20:19:febtest:INFO: 0-0 | XA-000-08-002-002-007-099-04 | 25.1 | 1189.2
14:20:19:febtest:INFO: 0-1 | XA-000-08-002-002-007-107-04 | 18.7 | 1224.5
14:20:20:febtest:INFO: 0-2 | XA-000-08-002-002-007-102-04 | 31.4 | 1183.3
14:20:20:febtest:INFO: 0-3 | XA-000-08-002-002-007-106-04 | 21.9 | 1224.5
14:20:20:febtest:INFO: 0-4 | XA-000-08-002-002-007-097-04 | 12.4 | 1253.7
14:20:20:febtest:INFO: 0-5 | XA-000-08-002-002-007-105-04 | 25.1 | 1212.7
14:20:20:febtest:INFO: 0-6 | XA-000-08-002-002-007-100-04 | 3.0 | 1277.1
14:20:21:febtest:INFO: 0-7 | XA-000-08-002-002-007-103-04 | 37.7 | 1159.7
14:20:21:ST3_smx:INFO: PROCESS 1: Configuring AFE with typical values
14:20:25:ST3_smx:INFO: chip: 0-1 34.556970 C 1159.654860 mV
14:20:25:ST3_smx:INFO: PROCESS 2: Checking channel response with internal pulse
14:20:25:ST3_smx:INFO: Electrons
14:20:25:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:20:27:ST3_smx:INFO: ----> Checking Analog response
14:20:27:ST3_smx:INFO: ----> Checking broken channels
14:20:27:ST3_smx:INFO: Total # broken ch: 0
14:20:27:ST3_smx:INFO: List FAST: []
14:20:27:ST3_smx:INFO: List SLOW: []
14:20:27:ST3_smx:INFO: Holes
14:20:27:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:20:29:ST3_smx:INFO: ----> Checking Analog response
14:20:29:ST3_smx:INFO: ----> Checking broken channels
14:20:29:ST3_smx:INFO: Total # broken ch: 0
14:20:29:ST3_smx:INFO: List FAST: []
14:20:29:ST3_smx:INFO: List SLOW: []
14:20:29:febtest:INFO: Add. | ASIC-ID | T [C] | Vddm [mV]
14:20:29:febtest:INFO: 0-0 | XA-000-08-002-002-007-099-04 | 25.1 | 1189.2
14:20:30:febtest:INFO: 0-1 | XA-000-08-002-002-007-107-04 | 34.6 | 1153.7
14:20:30:febtest:INFO: 0-2 | XA-000-08-002-002-007-102-04 | 31.4 | 1183.3
14:20:30:febtest:INFO: 0-3 | XA-000-08-002-002-007-106-04 | 21.9 | 1224.5
14:20:30:febtest:INFO: 0-4 | XA-000-08-002-002-007-097-04 | 12.4 | 1253.7
14:20:30:febtest:INFO: 0-5 | XA-000-08-002-002-007-105-04 | 21.9 | 1212.7
14:20:31:febtest:INFO: 0-6 | XA-000-08-002-002-007-100-04 | 3.0 | 1277.1
14:20:31:febtest:INFO: 0-7 | XA-000-08-002-002-007-103-04 | 37.7 | 1153.7
14:20:31:ST3_smx:INFO: PROCESS 1: Configuring AFE with typical values
14:20:35:ST3_smx:INFO: chip: 0-2 31.389742 C 1177.390875 mV
14:20:35:ST3_smx:INFO: PROCESS 2: Checking channel response with internal pulse
14:20:35:ST3_smx:INFO: Electrons
14:20:35:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:20:37:ST3_smx:INFO: ----> Checking Analog response
14:20:37:ST3_smx:INFO: ----> Checking broken channels
14:20:37:ST3_smx:INFO: Total # broken ch: 0
14:20:37:ST3_smx:INFO: List FAST: []
14:20:37:ST3_smx:INFO: List SLOW: []
14:20:37:ST3_smx:INFO: Holes
14:20:37:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:20:39:ST3_smx:INFO: ----> Checking Analog response
14:20:39:ST3_smx:INFO: ----> Checking broken channels
14:20:39:ST3_smx:INFO: Total # broken ch: 0
14:20:39:ST3_smx:INFO: List FAST: []
14:20:39:ST3_smx:INFO: List SLOW: []
14:20:39:febtest:INFO: Add. | ASIC-ID | T [C] | Vddm [mV]
14:20:39:febtest:INFO: 0-0 | XA-000-08-002-002-007-099-04 | 25.1 | 1189.2
14:20:40:febtest:INFO: 0-1 | XA-000-08-002-002-007-107-04 | 34.6 | 1159.7
14:20:40:febtest:INFO: 0-2 | XA-000-08-002-002-007-102-04 | 31.4 | 1171.5
14:20:40:febtest:INFO: 0-3 | XA-000-08-002-002-007-106-04 | 21.9 | 1224.5
14:20:40:febtest:INFO: 0-4 | XA-000-08-002-002-007-097-04 | 12.4 | 1247.9
14:20:41:febtest:INFO: 0-5 | XA-000-08-002-002-007-105-04 | 21.9 | 1206.9
14:20:41:febtest:INFO: 0-6 | XA-000-08-002-002-007-100-04 | 3.0 | 1277.1
14:20:41:febtest:INFO: 0-7 | XA-000-08-002-002-007-103-04 | 37.7 | 1153.7
14:20:41:ST3_smx:INFO: PROCESS 1: Configuring AFE with typical values
14:20:45:ST3_smx:INFO: chip: 0-3 31.389742 C 1177.390875 mV
14:20:45:ST3_smx:INFO: PROCESS 2: Checking channel response with internal pulse
14:20:45:ST3_smx:INFO: Electrons
14:20:45:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:20:47:ST3_smx:INFO: ----> Checking Analog response
14:20:47:ST3_smx:INFO: ----> Checking broken channels
14:20:48:ST3_smx:INFO: Total # broken ch: 0
14:20:48:ST3_smx:INFO: List FAST: []
14:20:48:ST3_smx:INFO: List SLOW: []
14:20:48:ST3_smx:INFO: Holes
14:20:48:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:20:50:ST3_smx:INFO: ----> Checking Analog response
14:20:50:ST3_smx:INFO: ----> Checking broken channels
14:20:50:ST3_smx:INFO: Total # broken ch: 0
14:20:50:ST3_smx:INFO: List FAST: []
14:20:50:ST3_smx:INFO: List SLOW: []
14:20:50:febtest:INFO: Add. | ASIC-ID | T [C] | Vddm [mV]
14:20:50:febtest:INFO: 0-0 | XA-000-08-002-002-007-099-04 | 25.1 | 1189.2
14:20:50:febtest:INFO: 0-1 | XA-000-08-002-002-007-107-04 | 37.7 | 1153.7
14:20:50:febtest:INFO: 0-2 | XA-000-08-002-002-007-102-04 | 31.4 | 1171.5
14:20:51:febtest:INFO: 0-3 | XA-000-08-002-002-007-106-04 | 31.4 | 1177.4
14:20:51:febtest:INFO: 0-4 | XA-000-08-002-002-007-097-04 | 12.4 | 1253.7
14:20:51:febtest:INFO: 0-5 | XA-000-08-002-002-007-105-04 | 25.1 | 1206.9
14:20:51:febtest:INFO: 0-6 | XA-000-08-002-002-007-100-04 | 3.0 | 1271.2
14:20:51:febtest:INFO: 0-7 | XA-000-08-002-002-007-103-04 | 37.7 | 1153.7
14:20:52:ST3_smx:INFO: PROCESS 1: Configuring AFE with typical values
14:20:55:ST3_smx:INFO: chip: 0-4 15.590880 C 1236.187875 mV
14:20:55:ST3_smx:INFO: PROCESS 2: Checking channel response with internal pulse
14:20:55:ST3_smx:INFO: Electrons
14:20:55:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:20:57:ST3_smx:INFO: ----> Checking Analog response
14:20:57:ST3_smx:INFO: ----> Checking broken channels
14:20:58:ST3_smx:INFO: Total # broken ch: 0
14:20:58:ST3_smx:INFO: List FAST: []
14:20:58:ST3_smx:INFO: List SLOW: []
14:20:58:ST3_smx:INFO: Holes
14:20:58:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:20:59:ST3_smx:INFO: ----> Checking Analog response
14:20:59:ST3_smx:INFO: ----> Checking broken channels
14:21:00:ST3_smx:INFO: Total # broken ch: 0
14:21:00:ST3_smx:INFO: List FAST: []
14:21:00:ST3_smx:INFO: List SLOW: []
14:21:00:febtest:INFO: Add. | ASIC-ID | T [C] | Vddm [mV]
14:21:00:febtest:INFO: 0-0 | XA-000-08-002-002-007-099-04 | 25.1 | 1189.2
14:21:00:febtest:INFO: 0-1 | XA-000-08-002-002-007-107-04 | 37.7 | 1153.7
14:21:00:febtest:INFO: 0-2 | XA-000-08-002-002-007-102-04 | 31.4 | 1171.5
14:21:01:febtest:INFO: 0-3 | XA-000-08-002-002-007-106-04 | 34.6 | 1177.4
14:21:01:febtest:INFO: 0-4 | XA-000-08-002-002-007-097-04 | 15.6 | 1230.3
14:21:01:febtest:INFO: 0-5 | XA-000-08-002-002-007-105-04 | 25.1 | 1206.9
14:21:01:febtest:INFO: 0-6 | XA-000-08-002-002-007-100-04 | 3.0 | 1271.2
14:21:02:febtest:INFO: 0-7 | XA-000-08-002-002-007-103-04 | 37.7 | 1153.7
14:21:02:ST3_smx:INFO: PROCESS 1: Configuring AFE with typical values
14:21:05:ST3_smx:INFO: chip: 0-5 31.389742 C 1171.483840 mV
14:21:05:ST3_smx:INFO: PROCESS 2: Checking channel response with internal pulse
14:21:06:ST3_smx:INFO: Electrons
14:21:06:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:21:08:ST3_smx:INFO: ----> Checking Analog response
14:21:08:ST3_smx:INFO: ----> Checking broken channels
14:21:08:ST3_smx:INFO: Total # broken ch: 0
14:21:08:ST3_smx:INFO: List FAST: []
14:21:08:ST3_smx:INFO: List SLOW: []
14:21:08:ST3_smx:INFO: Holes
14:21:08:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:21:10:ST3_smx:INFO: ----> Checking Analog response
14:21:10:ST3_smx:INFO: ----> Checking broken channels
14:21:10:ST3_smx:INFO: Total # broken ch: 0
14:21:10:ST3_smx:INFO: List FAST: []
14:21:10:ST3_smx:INFO: List SLOW: []
14:21:10:febtest:INFO: Add. | ASIC-ID | T [C] | Vddm [mV]
14:21:10:febtest:INFO: 0-0 | XA-000-08-002-002-007-099-04 | 25.1 | 1189.2
14:21:10:febtest:INFO: 0-1 | XA-000-08-002-002-007-107-04 | 37.7 | 1153.7
14:21:11:febtest:INFO: 0-2 | XA-000-08-002-002-007-102-04 | 34.6 | 1171.5
14:21:11:febtest:INFO: 0-3 | XA-000-08-002-002-007-106-04 | 31.4 | 1171.5
14:21:11:febtest:INFO: 0-4 | XA-000-08-002-002-007-097-04 | 15.6 | 1230.3
14:21:11:febtest:INFO: 0-5 | XA-000-08-002-002-007-105-04 | 34.6 | 1165.6
14:21:12:febtest:INFO: 0-6 | XA-000-08-002-002-007-100-04 | 6.1 | 1271.2
14:21:12:febtest:INFO: 0-7 | XA-000-08-002-002-007-103-04 | 40.9 | 1153.7
14:21:12:ST3_smx:INFO: PROCESS 1: Configuring AFE with typical values
14:21:16:ST3_smx:INFO: chip: 0-6 12.438562 C 1236.187875 mV
14:21:16:ST3_smx:INFO: PROCESS 2: Checking channel response with internal pulse
14:21:16:ST3_smx:INFO: Electrons
14:21:16:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:21:18:ST3_smx:INFO: ----> Checking Analog response
14:21:18:ST3_smx:INFO: ----> Checking broken channels
14:21:18:ST3_smx:INFO: Total # broken ch: 0
14:21:18:ST3_smx:INFO: List FAST: []
14:21:18:ST3_smx:INFO: List SLOW: []
14:21:18:ST3_smx:INFO: Holes
14:21:18:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:21:20:ST3_smx:INFO: ----> Checking Analog response
14:21:20:ST3_smx:INFO: ----> Checking broken channels
14:21:20:ST3_smx:INFO: Total # broken ch: 0
14:21:20:ST3_smx:INFO: List FAST: []
14:21:20:ST3_smx:INFO: List SLOW: []
14:21:20:febtest:INFO: Add. | ASIC-ID | T [C] | Vddm [mV]
14:21:21:febtest:INFO: 0-0 | XA-000-08-002-002-007-099-04 | 28.2 | 1183.3
14:21:21:febtest:INFO: 0-1 | XA-000-08-002-002-007-107-04 | 37.7 | 1153.7
14:21:21:febtest:INFO: 0-2 | XA-000-08-002-002-007-102-04 | 34.6 | 1171.5
14:21:21:febtest:INFO: 0-3 | XA-000-08-002-002-007-106-04 | 34.6 | 1171.5
14:21:21:febtest:INFO: 0-4 | XA-000-08-002-002-007-097-04 | 18.7 | 1230.3
14:21:22:febtest:INFO: 0-5 | XA-000-08-002-002-007-105-04 | 34.6 | 1165.6
14:21:22:febtest:INFO: 0-6 | XA-000-08-002-002-007-100-04 | 15.6 | 1230.3
14:21:22:febtest:INFO: 0-7 | XA-000-08-002-002-007-103-04 | 40.9 | 1153.7
14:21:22:ST3_smx:INFO: PROCESS 1: Configuring AFE with typical values
14:21:26:ST3_smx:INFO: chip: 0-7 31.389742 C 1177.390875 mV
14:21:26:ST3_smx:INFO: PROCESS 2: Checking channel response with internal pulse
14:21:26:ST3_smx:INFO: Electrons
14:21:26:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:21:28:ST3_smx:INFO: ----> Checking Analog response
14:21:28:ST3_smx:INFO: ----> Checking broken channels
14:21:28:ST3_smx:INFO: Total # broken ch: 0
14:21:28:ST3_smx:INFO: List FAST: []
14:21:28:ST3_smx:INFO: List SLOW: []
14:21:28:ST3_smx:INFO: Holes
14:21:28:ST3_smx:INFO: Injected pulses: 200LSB, amp_cal 11.200000 fC
14:21:30:ST3_smx:INFO: ----> Checking Analog response
14:21:30:ST3_smx:INFO: ----> Checking broken channels
14:21:31:ST3_smx:INFO: Total # broken ch: 0
14:21:31:ST3_smx:INFO: List FAST: []
14:21:31:ST3_smx:INFO: List SLOW: []
14:21:31:febtest:INFO: Add. | ASIC-ID | T [C] | Vddm [mV]
14:21:31:febtest:INFO: 0-0 | XA-000-08-002-002-007-099-04 | 25.1 | 1189.2
14:21:31:febtest:INFO: 0-1 | XA-000-08-002-002-007-107-04 | 37.7 | 1153.7
14:21:31:febtest:INFO: 0-2 | XA-000-08-002-002-007-102-04 | 34.6 | 1171.5
14:21:31:febtest:INFO: 0-3 | XA-000-08-002-002-007-106-04 | 34.6 | 1171.5
14:21:32:febtest:INFO: 0-4 | XA-000-08-002-002-007-097-04 | 18.7 | 1230.3
14:21:32:febtest:INFO: 0-5 | XA-000-08-002-002-007-105-04 | 34.6 | 1165.6
14:21:32:febtest:INFO: 0-6 | XA-000-08-002-002-007-100-04 | 15.6 | 1230.3
14:21:32:febtest:INFO: 0-7 | XA-000-08-002-002-007-103-04 | 31.4 | 1171.5
############################################################
# S U M M A R Y #
############################################################
{'TEST_NAME': 'FEB-ASIC', 'TEST_DATE': '2023_08_03-14_19_56', 'OPERATOR': 'Oleksandr S.; Robert V.; ', 'PROJECT': 'Production', 'SITE': 'GSI', 'SETUP': 'GSI_TEST_SETUP_1', 'ASIC_ID': 'XA-000-08-002-002-007-103-04', 'FUSED_ID': 6359364699118663284, 'HW_ADDR': 7, 'VERS_NO': '2.2', 'CABLE_SET_ID': '', 'IC_TEMP': '0', 'VDDM': '0', 'AUX': '0', 'CSABIAS': '0', 'VDDM_INT': '0', 'ADC_Chi2': 0.0, 'ADC_NDF': 0, 'ADC_P0': 0.0, 'ADC_P1': 0.006824, 'ADC_P2': -2.485e-06, 'ADC_P0err': 0.001, 'ADC_P1err': 0.001, 'ADC_P2err': 1e-05, 'ADC_VREF_P': 58, 'ADC_VREF_N': 30, 'ADC_VREF_T': 128, 'ADC_VREF_TR': 122, 'THR2_GLB': 30, 'LOOP__PLS': 100, 'CALIB_PLS': 250, 'SnsLoop': 5, 'IFED': 31, 'CSA_BIAS': 15, 'CSA_Chi2': 0.0, 'CSA_NDF': 0, 'CSA_P0': 0.0, 'CSA_P1': 0.0, 'CSA_P2': 0.0, 'CSA_P0err': 0.0, 'CSA_P1err': 0.0, 'CSA_P2err': 0.0, 'CONF_FAIL_REG': 0, 'N_BROKEN_DISC': 0, 'N_BROKEN_FAST': '[]', 'N_BROKEN_SLOW': '[]', 'P_BROKEN_DISC': 0, 'P_BROKEN_FAST': '[]', 'P_BROKEN_SLOW': '[]', 'ASIC_QA_category': '', 'N_BROKEN_CABLE': 0, 'LIST_OF_BROKEN_CABLES': 0, 'VI_bInit': ['2.448', '1.5620', '1.846', '2.1170', '7.000', '1.5460', '7.000', '1.5460'], 'VI_aInit': ['0', '0', '0', '0', '0', '0'], 'VI_atEnd': ['0', '0', '0', '0', '0', '0'], 'AMP_CAL': 200, 'PlsLoop': 3, 'N_ANA_PRESENT': 'Analog response OK', 'N_DISC_FAIL_CH': 0, 'N_ANA_FAIL_CH': '0', 'P_ANA_PRESENT': 'Analog response OK', 'P_DISC_FAIL_CH': 0, 'P_ANA_FAIL_CH': '0'}
===============================
{'CSA_FRONT': 15, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 15, 'AMP_CAL': 200, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 15, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 15, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 15, 'AMP_CAL': 200, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 15, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 15, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 15, 'AMP_CAL': 200, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 15, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 15, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 15, 'AMP_CAL': 200, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 15, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 15, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 15, 'AMP_CAL': 200, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 15, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 15, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 15, 'AMP_CAL': 200, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 15, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 15, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 15, 'AMP_CAL': 200, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 15, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 15, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 15, 'AMP_CAL': 200, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 15, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
14:21:36:ST3_Shared:INFO: /home/cbm/public_html/Production_LogDir//FEB/FEB_1006/A//TestDate_2023_08_03-14_19_56/