15:03:54:ST3_hmp4040:INFO:	HAMEG,HMP2030,017836163,HW50010002/SW2.30
15:03:54:febtest:INFO:	FEB8.2 selected
15:03:54:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
15:03:54:febtest:INFO:	FEB8.2 selected
15:03:54:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
15:03:59:ST3_Shared:INFO:	Listo of operators:Robert V.; 
15:04:16:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
15:04:16:ST3_Shared:INFO:	-----------------------FEB-Microcable-----------------------
15:04:16:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
15:04:16:febtest:INFO:	Tsting FEB with SN 1013
15:04:18:smx_tester:INFO:	Scanning setup
15:04:18:elinks:INFO:	Disabling clock on downlink 0
15:04:18:elinks:INFO:	Disabling clock on downlink 1
15:04:18:elinks:INFO:	Disabling clock on downlink 2
15:04:18:elinks:INFO:	Disabling clock on downlink 3
15:04:18:elinks:INFO:	Disabling clock on downlink 4
15:04:18:setup_element:INFO:	Checking SOS, encoding_mode: SOS
15:04:18:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
15:04:18:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
15:04:18:elinks:INFO:	Disabling clock on downlink 0
15:04:18:elinks:INFO:	Disabling clock on downlink 1
15:04:18:elinks:INFO:	Disabling clock on downlink 2
15:04:18:elinks:INFO:	Disabling clock on downlink 3
15:04:18:elinks:INFO:	Disabling clock on downlink 4
15:04:18:setup_element:INFO:	Checking SOS, encoding_mode: SOS
15:04:18:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
15:04:18:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
15:04:18:elinks:INFO:	Disabling clock on downlink 0
15:04:18:elinks:INFO:	Disabling clock on downlink 1
15:04:18:elinks:INFO:	Disabling clock on downlink 2
15:04:18:elinks:INFO:	Disabling clock on downlink 3
15:04:18:elinks:INFO:	Disabling clock on downlink 4
15:04:18:setup_element:INFO:	Checking SOS, encoding_mode: SOS
15:04:18:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
15:04:18:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
15:04:18:elinks:INFO:	Disabling clock on downlink 0
15:04:18:elinks:INFO:	Disabling clock on downlink 1
15:04:18:elinks:INFO:	Disabling clock on downlink 2
15:04:18:elinks:INFO:	Disabling clock on downlink 3
15:04:18:elinks:INFO:	Disabling clock on downlink 4
15:04:18:setup_element:INFO:	Checking SOS, encoding_mode: SOS
15:04:18:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 16
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 17
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 18
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 19
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 20
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 21
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 22
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 23
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 24
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 25
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 26
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 27
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 28
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 29
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 30
15:04:18:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 31
15:04:18:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
15:04:18:elinks:INFO:	Disabling clock on downlink 0
15:04:18:elinks:INFO:	Disabling clock on downlink 1
15:04:18:elinks:INFO:	Disabling clock on downlink 2
15:04:18:elinks:INFO:	Disabling clock on downlink 3
15:04:18:elinks:INFO:	Disabling clock on downlink 4
15:04:18:setup_element:INFO:	Checking SOS, encoding_mode: SOS
15:04:18:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
15:04:19:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
15:04:19:setup_element:INFO:	Scanning clock phase
15:04:19:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
15:04:19:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
15:04:19:setup_element:INFO:	Clock phase scan results for group 0, downlink 3
15:04:19:setup_element:INFO:	Eye window for uplink 16: ________________________________________________________________________________
Clock Delay: 40
15:04:19:setup_element:INFO:	Eye window for uplink 17: ________________________________________________________________________________
Clock Delay: 40
15:04:19:setup_element:INFO:	Eye window for uplink 18: ____________________________________________________________________XXXXXX______
Clock Delay: 30
15:04:19:setup_element:INFO:	Eye window for uplink 19: ____________________________________________________________________XXXXXX______
Clock Delay: 30
15:04:19:setup_element:INFO:	Eye window for uplink 20: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
15:04:19:setup_element:INFO:	Eye window for uplink 21: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
15:04:19:setup_element:INFO:	Eye window for uplink 22: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
15:04:19:setup_element:INFO:	Eye window for uplink 23: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
15:04:19:setup_element:INFO:	Eye window for uplink 24: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
15:04:19:setup_element:INFO:	Eye window for uplink 25: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
15:04:19:setup_element:INFO:	Eye window for uplink 26: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
15:04:19:setup_element:INFO:	Eye window for uplink 27: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
15:04:19:setup_element:INFO:	Eye window for uplink 28: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
15:04:19:setup_element:INFO:	Eye window for uplink 29: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
15:04:19:setup_element:INFO:	Eye window for uplink 30: _____________________________________________________________________XXXXXX_____
Clock Delay: 31
15:04:19:setup_element:INFO:	Eye window for uplink 31: _____________________________________________________________________XXXXXX_____
Clock Delay: 31
15:04:19:setup_element:INFO:	Setting the clock phase to 30 for group 0, downlink 3
15:04:19:setup_element:INFO:	Scanning data phases
15:04:19:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
15:04:19:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
15:04:25:setup_element:INFO:	Data phase scan results for group 0, downlink 3
15:04:25:setup_element:INFO:	Eye window for uplink 16: _________________XXXXX__________________
Data delay found: 39
15:04:25:setup_element:INFO:	Eye window for uplink 17: ____________XXXXX_______________________
Data delay found: 34
15:04:25:setup_element:INFO:	Eye window for uplink 18: ___________XXXXX________________________
Data delay found: 33
15:04:25:setup_element:INFO:	Eye window for uplink 19: ________XXXXX___________________________
Data delay found: 30
15:04:25:setup_element:INFO:	Eye window for uplink 20: _______XXXXX____________________________
Data delay found: 29
15:04:25:setup_element:INFO:	Eye window for uplink 21: ______XXXXX_____________________________
Data delay found: 28
15:04:25:setup_element:INFO:	Eye window for uplink 22: ______XXXX______________________________
Data delay found: 27
15:04:25:setup_element:INFO:	Eye window for uplink 23: ___XXXX_________________________________
Data delay found: 24
15:04:25:setup_element:INFO:	Eye window for uplink 24: ________________________________XXXXXX__
Data delay found: 14
15:04:25:setup_element:INFO:	Eye window for uplink 25: XX__________________________________XXXX
Data delay found: 18
15:04:25:setup_element:INFO:	Eye window for uplink 26: _______________________________XXXXX____
Data delay found: 13
15:04:25:setup_element:INFO:	Eye window for uplink 27: X__________________________________XXXXX
Data delay found: 17
15:04:25:setup_element:INFO:	Eye window for uplink 28: X___________________________________XXXX
Data delay found: 18
15:04:25:setup_element:INFO:	Eye window for uplink 29: XXXX__________________________________XX
Data delay found: 20
15:04:25:setup_element:INFO:	Eye window for uplink 30: XXXXX_________________________________XX
Data delay found: 21
15:04:25:setup_element:INFO:	Eye window for uplink 31: XXXX________________________________XXXX
Data delay found: 19
15:04:25:setup_element:INFO:	Setting the data phase to 39 for uplink 16
15:04:25:setup_element:INFO:	Setting the data phase to 34 for uplink 17
15:04:25:setup_element:INFO:	Setting the data phase to 33 for uplink 18
15:04:25:setup_element:INFO:	Setting the data phase to 30 for uplink 19
15:04:25:setup_element:INFO:	Setting the data phase to 29 for uplink 20
15:04:25:setup_element:INFO:	Setting the data phase to 28 for uplink 21
15:04:25:setup_element:INFO:	Setting the data phase to 27 for uplink 22
15:04:25:setup_element:INFO:	Setting the data phase to 24 for uplink 23
15:04:25:setup_element:INFO:	Setting the data phase to 14 for uplink 24
15:04:25:setup_element:INFO:	Setting the data phase to 18 for uplink 25
15:04:25:setup_element:INFO:	Setting the data phase to 13 for uplink 26
15:04:25:setup_element:INFO:	Setting the data phase to 17 for uplink 27
15:04:25:setup_element:INFO:	Setting the data phase to 18 for uplink 28
15:04:25:setup_element:INFO:	Setting the data phase to 20 for uplink 29
15:04:25:setup_element:INFO:	Setting the data phase to 21 for uplink 30
15:04:25:setup_element:INFO:	Setting the data phase to 19 for uplink 31
15:04:25:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 30
    Window Length: 71
    Eye Windows:
      Uplink 16: ________________________________________________________________________________
      Uplink 17: ________________________________________________________________________________
      Uplink 18: ____________________________________________________________________XXXXXX______
      Uplink 19: ____________________________________________________________________XXXXXX______
      Uplink 20: ___________________________________________________________________XXXXXXX______
      Uplink 21: ___________________________________________________________________XXXXXXX______
      Uplink 22: ___________________________________________________________________XXXXXXXX_____
      Uplink 23: ___________________________________________________________________XXXXXXXX_____
      Uplink 24: __________________________________________________________________XXXXXXXX______
      Uplink 25: __________________________________________________________________XXXXXXXX______
      Uplink 26: __________________________________________________________________XXXXXXXX______
      Uplink 27: __________________________________________________________________XXXXXXXX______
      Uplink 28: __________________________________________________________________XXXXXXXX______
      Uplink 29: __________________________________________________________________XXXXXXXX______
      Uplink 30: _____________________________________________________________________XXXXXX_____
      Uplink 31: _____________________________________________________________________XXXXXX_____
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 39
      Window Length: 35
      Eye Window: _________________XXXXX__________________
    Uplink 17:
      Optimal Phase: 34
      Window Length: 35
      Eye Window: ____________XXXXX_______________________
    Uplink 18:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 19:
      Optimal Phase: 30
      Window Length: 35
      Eye Window: ________XXXXX___________________________
    Uplink 20:
      Optimal Phase: 29
      Window Length: 35
      Eye Window: _______XXXXX____________________________
    Uplink 21:
      Optimal Phase: 28
      Window Length: 35
      Eye Window: ______XXXXX_____________________________
    Uplink 22:
      Optimal Phase: 27
      Window Length: 36
      Eye Window: ______XXXX______________________________
    Uplink 23:
      Optimal Phase: 24
      Window Length: 36
      Eye Window: ___XXXX_________________________________
    Uplink 24:
      Optimal Phase: 14
      Window Length: 34
      Eye Window: ________________________________XXXXXX__
    Uplink 25:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 26:
      Optimal Phase: 13
      Window Length: 35
      Eye Window: _______________________________XXXXX____
    Uplink 27:
      Optimal Phase: 17
      Window Length: 34
      Eye Window: X__________________________________XXXXX
    Uplink 28:
      Optimal Phase: 18
      Window Length: 35
      Eye Window: X___________________________________XXXX
    Uplink 29:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 30:
      Optimal Phase: 21
      Window Length: 33
      Eye Window: XXXXX_________________________________XX
    Uplink 31:
      Optimal Phase: 19
      Window Length: 32
      Eye Window: XXXX________________________________XXXX
]
15:04:25:setup_element:INFO:	Beginning SMX ASICs map scan
15:04:25:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
15:04:25:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
15:04:25:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
15:04:25:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
15:04:25:uplink:INFO:	Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
15:04:25:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 0, uplink 17
15:04:25:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 1, uplink 16
15:04:25:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 24
15:04:25:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 25
15:04:25:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 0, uplink 19
15:04:25:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 1, uplink 18
15:04:25:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 26
15:04:25:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 27
15:04:26:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 0, uplink 21
15:04:26:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 1, uplink 20
15:04:26:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 28
15:04:26:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 29
15:04:26:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 0, uplink 23
15:04:26:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 1, uplink 22
15:04:26:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 30
15:04:26:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 31
15:04:28:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x0: (ASIC uplink, uplink): (0, 17), (1, 16)
    ASIC address 0x1: (ASIC uplink, uplink): (0, 24), (1, 25)
    ASIC address 0x2: (ASIC uplink, uplink): (0, 19), (1, 18)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x4: (ASIC uplink, uplink): (0, 21), (1, 20)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x6: (ASIC uplink, uplink): (0, 23), (1, 22)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 30), (1, 31)
  Clock Phase Characteristic:
    Optimal Phase: 30
    Window Length: 71
    Eye Windows:
      Uplink 16: ________________________________________________________________________________
      Uplink 17: ________________________________________________________________________________
      Uplink 18: ____________________________________________________________________XXXXXX______
      Uplink 19: ____________________________________________________________________XXXXXX______
      Uplink 20: ___________________________________________________________________XXXXXXX______
      Uplink 21: ___________________________________________________________________XXXXXXX______
      Uplink 22: ___________________________________________________________________XXXXXXXX_____
      Uplink 23: ___________________________________________________________________XXXXXXXX_____
      Uplink 24: __________________________________________________________________XXXXXXXX______
      Uplink 25: __________________________________________________________________XXXXXXXX______
      Uplink 26: __________________________________________________________________XXXXXXXX______
      Uplink 27: __________________________________________________________________XXXXXXXX______
      Uplink 28: __________________________________________________________________XXXXXXXX______
      Uplink 29: __________________________________________________________________XXXXXXXX______
      Uplink 30: _____________________________________________________________________XXXXXX_____
      Uplink 31: _____________________________________________________________________XXXXXX_____
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 39
      Window Length: 35
      Eye Window: _________________XXXXX__________________
    Uplink 17:
      Optimal Phase: 34
      Window Length: 35
      Eye Window: ____________XXXXX_______________________
    Uplink 18:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 19:
      Optimal Phase: 30
      Window Length: 35
      Eye Window: ________XXXXX___________________________
    Uplink 20:
      Optimal Phase: 29
      Window Length: 35
      Eye Window: _______XXXXX____________________________
    Uplink 21:
      Optimal Phase: 28
      Window Length: 35
      Eye Window: ______XXXXX_____________________________
    Uplink 22:
      Optimal Phase: 27
      Window Length: 36
      Eye Window: ______XXXX______________________________
    Uplink 23:
      Optimal Phase: 24
      Window Length: 36
      Eye Window: ___XXXX_________________________________
    Uplink 24:
      Optimal Phase: 14
      Window Length: 34
      Eye Window: ________________________________XXXXXX__
    Uplink 25:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 26:
      Optimal Phase: 13
      Window Length: 35
      Eye Window: _______________________________XXXXX____
    Uplink 27:
      Optimal Phase: 17
      Window Length: 34
      Eye Window: X__________________________________XXXXX
    Uplink 28:
      Optimal Phase: 18
      Window Length: 35
      Eye Window: X___________________________________XXXX
    Uplink 29:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 30:
      Optimal Phase: 21
      Window Length: 33
      Eye Window: XXXXX_________________________________XX
    Uplink 31:
      Optimal Phase: 19
      Window Length: 32
      Eye Window: XXXX________________________________XXXX

15:04:28:setup_element:INFO:	Performing Elink synchronization
15:04:28:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
15:04:28:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
15:04:28:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
15:04:28:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
15:04:28:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 3
15:04:28:uplink:INFO:	Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
15:04:28:ST3_emu:INFO:	Number of chips: 8
15:04:28:ST3_emu:INFO:	Chip address:  	0x0
15:04:28:ST3_emu:INFO:	Chip address:  	0x1
15:04:28:ST3_emu:INFO:	Chip address:  	0x2
15:04:28:ST3_emu:INFO:	Chip address:  	0x3
15:04:28:ST3_emu:INFO:	Chip address:  	0x4
15:04:28:ST3_emu:INFO:	Chip address:  	0x5
15:04:28:ST3_emu:INFO:	Chip address:  	0x6
15:04:28:ST3_emu:INFO:	Chip address:  	0x7
15:04:29:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
15:04:29:febtest:INFO:	0-0 | XA-000-08-002-000-003-143-10 |  37.7 | 1165.6
15:04:29:febtest:INFO:	0-1 | XA-000-08-002-000-002-015-13 |  34.6 | 1189.2
15:04:30:febtest:INFO:	0-2 | XA-000-08-001-064-061-184-14 |  44.1 | 1147.8
15:04:30:febtest:INFO:	0-3 | XA-000-08-002-000-002-018-10 |  47.3 | 1153.7
15:04:30:febtest:INFO:	0-4 | XA-000-08-002-000-003-142-10 |  31.4 | 1189.2
15:04:30:febtest:INFO:	0-5 | XA-000-08-002-000-003-140-10 |  28.2 | 1212.7
15:04:31:febtest:INFO:	0-6 | XA-000-08-002-000-003-146-13 |  25.1 | 1218.6
15:04:31:febtest:INFO:	0-7 | XA-000-08-002-000-003-145-13 |  25.1 | 1230.3
15:04:31:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:04:34:ST3_smx:INFO:	chip: 0-0 	 28.225000 C 	 1189.190035 mV
15:04:34:ST3_smx:INFO:	# loops 0
15:04:36:ST3_smx:INFO:	# loops 1
15:04:38:ST3_smx:INFO:	# loops 2
15:04:39:ST3_smx:INFO:	# loops 3
15:04:41:ST3_smx:INFO:	# loops 4
15:04:42:ST3_smx:INFO:	Total # of broken channels: 0
15:04:42:ST3_smx:INFO:	List of broken channels: []
15:04:42:ST3_smx:INFO:	Total # of broken channels: 0
15:04:42:ST3_smx:INFO:	List of broken channels: []
15:04:43:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:04:46:ST3_smx:INFO:	chip: 0-1 	 44.073563 C 	 1159.654860 mV
15:04:46:ST3_smx:INFO:	# loops 0
15:04:48:ST3_smx:INFO:	# loops 1
15:04:50:ST3_smx:INFO:	# loops 2
15:04:51:ST3_smx:INFO:	# loops 3
15:04:53:ST3_smx:INFO:	# loops 4
15:04:54:ST3_smx:INFO:	Total # of broken channels: 0
15:04:54:ST3_smx:INFO:	List of broken channels: []
15:04:54:ST3_smx:INFO:	Total # of broken channels: 3
15:04:54:ST3_smx:INFO:	List of broken channels: [33, 43, 59]
15:04:55:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:04:59:ST3_smx:INFO:	chip: 0-2 	 50.430383 C 	 1129.995435 mV
15:04:59:ST3_smx:INFO:	# loops 0
15:05:00:ST3_smx:INFO:	# loops 1
15:05:02:ST3_smx:INFO:	# loops 2
15:05:03:ST3_smx:INFO:	# loops 3
15:05:05:ST3_smx:INFO:	# loops 4
15:05:06:ST3_smx:INFO:	Total # of broken channels: 1
15:05:06:ST3_smx:INFO:	List of broken channels: [126]
15:05:06:ST3_smx:INFO:	Total # of broken channels: 25
15:05:06:ST3_smx:INFO:	List of broken channels: [5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 37, 39, 41, 45, 49, 53, 59, 65, 67, 126]
15:05:07:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:05:11:ST3_smx:INFO:	chip: 0-3 	 53.612520 C 	 1141.874115 mV
15:05:11:ST3_smx:INFO:	# loops 0
15:05:12:ST3_smx:INFO:	# loops 1
15:05:14:ST3_smx:INFO:	# loops 2
15:05:15:ST3_smx:INFO:	# loops 3
15:05:17:ST3_smx:INFO:	# loops 4
15:05:18:ST3_smx:INFO:	Total # of broken channels: 32
15:05:18:ST3_smx:INFO:	List of broken channels: [7, 9, 11, 13, 15, 17, 19, 21, 25, 27, 29, 31, 33, 35, 43, 47, 49, 51, 61, 63, 65, 69, 71, 73, 75, 87, 89, 91, 93, 95, 101, 105]
15:05:18:ST3_smx:INFO:	Total # of broken channels: 61
15:05:18:ST3_smx:INFO:	List of broken channels: [3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 91, 93, 95, 97, 99, 101, 103, 105, 107, 109, 111, 113, 115, 117, 119, 121, 123]
15:05:19:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:05:22:ST3_smx:INFO:	chip: 0-4 	 37.726682 C 	 1183.292940 mV
15:05:22:ST3_smx:INFO:	# loops 0
15:05:24:ST3_smx:INFO:	# loops 1
15:05:26:ST3_smx:INFO:	# loops 2
15:05:27:ST3_smx:INFO:	# loops 3
15:05:29:ST3_smx:INFO:	# loops 4
15:05:30:ST3_smx:INFO:	Total # of broken channels: 0
15:05:30:ST3_smx:INFO:	List of broken channels: []
15:05:30:ST3_smx:INFO:	Total # of broken channels: 17
15:05:30:ST3_smx:INFO:	List of broken channels: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 37]
15:05:31:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:05:34:ST3_smx:INFO:	chip: 0-5 	 34.556970 C 	 1212.728715 mV
15:05:34:ST3_smx:INFO:	# loops 0
15:05:36:ST3_smx:INFO:	# loops 1
15:05:38:ST3_smx:INFO:	# loops 2
15:05:39:ST3_smx:INFO:	# loops 3
15:05:41:ST3_smx:INFO:	# loops 4
15:05:42:ST3_smx:INFO:	Total # of broken channels: 0
15:05:42:ST3_smx:INFO:	List of broken channels: []
15:05:42:ST3_smx:INFO:	Total # of broken channels: 1
15:05:42:ST3_smx:INFO:	List of broken channels: [114]
15:05:43:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:05:46:ST3_smx:INFO:	chip: 0-6 	 37.726682 C 	 1183.292940 mV
15:05:46:ST3_smx:INFO:	# loops 0
15:05:48:ST3_smx:INFO:	# loops 1
15:05:49:ST3_smx:INFO:	# loops 2
15:05:51:ST3_smx:INFO:	# loops 3
15:05:52:ST3_smx:INFO:	# loops 4
15:05:54:ST3_smx:INFO:	Total # of broken channels: 1
15:05:54:ST3_smx:INFO:	List of broken channels: [28]
15:05:54:ST3_smx:INFO:	Total # of broken channels: 3
15:05:54:ST3_smx:INFO:	List of broken channels: [28, 115, 119]
15:05:54:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:05:58:ST3_smx:INFO:	chip: 0-7 	 34.556970 C 	 1206.851500 mV
15:05:58:ST3_smx:INFO:	# loops 0
15:06:00:ST3_smx:INFO:	# loops 1
15:06:01:ST3_smx:INFO:	# loops 2
15:06:03:ST3_smx:INFO:	# loops 3
15:06:04:ST3_smx:INFO:	# loops 4
15:06:06:ST3_smx:INFO:	Total # of broken channels: 0
15:06:06:ST3_smx:INFO:	List of broken channels: []
15:06:06:ST3_smx:INFO:	Total # of broken channels: 7
15:06:06:ST3_smx:INFO:	List of broken channels: [5, 9, 11, 13, 17, 19, 21]
15:06:06:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
15:06:06:febtest:INFO:	0-0 | XA-000-08-002-000-003-143-10 |  31.4 | 1183.3
15:06:07:febtest:INFO:	0-1 | XA-000-08-002-000-002-015-13 |  47.3 | 1147.8
15:06:07:febtest:INFO:	0-2 | XA-000-08-001-064-061-184-14 |  50.4 | 1130.0
15:06:07:febtest:INFO:	0-3 | XA-000-08-002-000-002-018-10 |  53.6 | 1135.9
15:06:07:febtest:INFO:	0-4 | XA-000-08-002-000-003-142-10 |  34.6 | 1183.3
15:06:07:febtest:INFO:	0-5 | XA-000-08-002-000-003-140-10 |  31.4 | 1206.9
15:06:08:febtest:INFO:	0-6 | XA-000-08-002-000-003-146-13 |  34.6 | 1183.3
15:06:08:febtest:INFO:	0-7 | XA-000-08-002-000-003-145-13 |  34.6 | 1201.0
15:06:27:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
15:06:27:ST3_Shared:INFO:	-----------------------FEB-Microcable-----------------------
15:06:27:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
15:06:27:febtest:INFO:	Tsting FEB with SN 1013
15:06:29:smx_tester:INFO:	Scanning setup
15:06:29:elinks:INFO:	Disabling clock on downlink 0
15:06:29:elinks:INFO:	Disabling clock on downlink 1
15:06:29:elinks:INFO:	Disabling clock on downlink 2
15:06:29:elinks:INFO:	Disabling clock on downlink 3
15:06:29:elinks:INFO:	Disabling clock on downlink 4
15:06:29:setup_element:INFO:	Checking SOS, encoding_mode: SOS
15:06:29:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
15:06:29:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
15:06:29:elinks:INFO:	Disabling clock on downlink 0
15:06:29:elinks:INFO:	Disabling clock on downlink 1
15:06:29:elinks:INFO:	Disabling clock on downlink 2
15:06:29:elinks:INFO:	Disabling clock on downlink 3
15:06:29:elinks:INFO:	Disabling clock on downlink 4
15:06:29:setup_element:INFO:	Checking SOS, encoding_mode: SOS
15:06:29:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
15:06:29:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
15:06:29:elinks:INFO:	Disabling clock on downlink 0
15:06:29:elinks:INFO:	Disabling clock on downlink 1
15:06:29:elinks:INFO:	Disabling clock on downlink 2
15:06:29:elinks:INFO:	Disabling clock on downlink 3
15:06:29:elinks:INFO:	Disabling clock on downlink 4
15:06:29:setup_element:INFO:	Checking SOS, encoding_mode: SOS
15:06:29:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
15:06:29:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
15:06:29:elinks:INFO:	Disabling clock on downlink 0
15:06:29:elinks:INFO:	Disabling clock on downlink 1
15:06:29:elinks:INFO:	Disabling clock on downlink 2
15:06:29:elinks:INFO:	Disabling clock on downlink 3
15:06:29:elinks:INFO:	Disabling clock on downlink 4
15:06:29:setup_element:INFO:	Checking SOS, encoding_mode: SOS
15:06:29:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 16
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 17
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 18
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 19
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 20
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 21
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 22
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 23
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 24
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 25
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 26
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 27
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 28
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 29
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 30
15:06:29:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 31
15:06:29:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
15:06:29:elinks:INFO:	Disabling clock on downlink 0
15:06:29:elinks:INFO:	Disabling clock on downlink 1
15:06:29:elinks:INFO:	Disabling clock on downlink 2
15:06:29:elinks:INFO:	Disabling clock on downlink 3
15:06:29:elinks:INFO:	Disabling clock on downlink 4
15:06:29:setup_element:INFO:	Checking SOS, encoding_mode: SOS
15:06:29:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
15:06:30:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
15:06:30:setup_element:INFO:	Scanning clock phase
15:06:30:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
15:06:30:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
15:06:30:setup_element:INFO:	Clock phase scan results for group 0, downlink 3
15:06:30:setup_element:INFO:	Eye window for uplink 16: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:06:30:setup_element:INFO:	Eye window for uplink 17: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:06:30:setup_element:INFO:	Eye window for uplink 18: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
15:06:30:setup_element:INFO:	Eye window for uplink 19: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
15:06:30:setup_element:INFO:	Eye window for uplink 20: ____________________________________________________________________XXXXXX______
Clock Delay: 30
15:06:30:setup_element:INFO:	Eye window for uplink 21: ____________________________________________________________________XXXXXX______
Clock Delay: 30
15:06:30:setup_element:INFO:	Eye window for uplink 22: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
15:06:30:setup_element:INFO:	Eye window for uplink 23: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
15:06:30:setup_element:INFO:	Eye window for uplink 24: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
15:06:30:setup_element:INFO:	Eye window for uplink 25: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
15:06:30:setup_element:INFO:	Eye window for uplink 26: ________________________________________________________________________________
Clock Delay: 40
15:06:30:setup_element:INFO:	Eye window for uplink 27: ________________________________________________________________________________
Clock Delay: 40
15:06:30:setup_element:INFO:	Eye window for uplink 28: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
15:06:30:setup_element:INFO:	Eye window for uplink 29: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
15:06:30:setup_element:INFO:	Eye window for uplink 30: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
15:06:30:setup_element:INFO:	Eye window for uplink 31: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
15:06:30:setup_element:INFO:	Setting the clock phase to 31 for group 0, downlink 3
15:06:30:setup_element:INFO:	Scanning data phases
15:06:30:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
15:06:30:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
15:06:36:setup_element:INFO:	Data phase scan results for group 0, downlink 3
15:06:36:setup_element:INFO:	Eye window for uplink 16: ________________XXXX____________________
Data delay found: 37
15:06:36:setup_element:INFO:	Eye window for uplink 17: ____________XXXX________________________
Data delay found: 33
15:06:36:setup_element:INFO:	Eye window for uplink 18: _________XXXXX__________________________
Data delay found: 31
15:06:36:setup_element:INFO:	Eye window for uplink 19: _______XXXXX____________________________
Data delay found: 29
15:06:36:setup_element:INFO:	Eye window for uplink 20: ______XXXX______________________________
Data delay found: 27
15:06:36:setup_element:INFO:	Eye window for uplink 21: ____XXXXX_______________________________
Data delay found: 26
15:06:36:setup_element:INFO:	Eye window for uplink 22: ____XXXXX_______________________________
Data delay found: 26
15:06:36:setup_element:INFO:	Eye window for uplink 23: _XXXXX__________________________________
Data delay found: 23
15:06:36:setup_element:INFO:	Eye window for uplink 24: _______________________________XXXXX____
Data delay found: 13
15:06:36:setup_element:INFO:	Eye window for uplink 25: ___________________________________XXXXX
Data delay found: 17
15:06:36:setup_element:INFO:	Eye window for uplink 26: ______________________________XXXXX_____
Data delay found: 12
15:06:36:setup_element:INFO:	Eye window for uplink 27: __________________________________XXXXX_
Data delay found: 16
15:06:36:setup_element:INFO:	Eye window for uplink 28: __________________________________XXXXXX
Data delay found: 16
15:06:36:setup_element:INFO:	Eye window for uplink 29: XX_________________________________XXXXX
Data delay found: 18
15:06:36:setup_element:INFO:	Eye window for uplink 30: XX__________________________________XXXX
Data delay found: 18
15:06:36:setup_element:INFO:	Eye window for uplink 31: XX_________________________________XXXXX
Data delay found: 18
15:06:36:setup_element:INFO:	Setting the data phase to 37 for uplink 16
15:06:36:setup_element:INFO:	Setting the data phase to 33 for uplink 17
15:06:36:setup_element:INFO:	Setting the data phase to 31 for uplink 18
15:06:36:setup_element:INFO:	Setting the data phase to 29 for uplink 19
15:06:36:setup_element:INFO:	Setting the data phase to 27 for uplink 20
15:06:36:setup_element:INFO:	Setting the data phase to 26 for uplink 21
15:06:36:setup_element:INFO:	Setting the data phase to 26 for uplink 22
15:06:36:setup_element:INFO:	Setting the data phase to 23 for uplink 23
15:06:36:setup_element:INFO:	Setting the data phase to 13 for uplink 24
15:06:36:setup_element:INFO:	Setting the data phase to 17 for uplink 25
15:06:36:setup_element:INFO:	Setting the data phase to 12 for uplink 26
15:06:36:setup_element:INFO:	Setting the data phase to 16 for uplink 27
15:06:36:setup_element:INFO:	Setting the data phase to 16 for uplink 28
15:06:36:setup_element:INFO:	Setting the data phase to 18 for uplink 29
15:06:36:setup_element:INFO:	Setting the data phase to 18 for uplink 30
15:06:36:setup_element:INFO:	Setting the data phase to 18 for uplink 31
15:06:36:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 31
    Window Length: 69
    Eye Windows:
      Uplink 16: _____________________________________________________________________XXXXXXXX___
      Uplink 17: _____________________________________________________________________XXXXXXXX___
      Uplink 18: ____________________________________________________________________XXXXXXX_____
      Uplink 19: ____________________________________________________________________XXXXXXX_____
      Uplink 20: ____________________________________________________________________XXXXXX______
      Uplink 21: ____________________________________________________________________XXXXXX______
      Uplink 22: ___________________________________________________________________XXXXXXXX_____
      Uplink 23: ___________________________________________________________________XXXXXXXX_____
      Uplink 24: __________________________________________________________________XXXXXXXX______
      Uplink 25: __________________________________________________________________XXXXXXXX______
      Uplink 26: ________________________________________________________________________________
      Uplink 27: ________________________________________________________________________________
      Uplink 28: __________________________________________________________________XXXXXXXX______
      Uplink 29: __________________________________________________________________XXXXXXXX______
      Uplink 30: _____________________________________________________________________XXXXXXX____
      Uplink 31: _____________________________________________________________________XXXXXXX____
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 37
      Window Length: 36
      Eye Window: ________________XXXX____________________
    Uplink 17:
      Optimal Phase: 33
      Window Length: 36
      Eye Window: ____________XXXX________________________
    Uplink 18:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 19:
      Optimal Phase: 29
      Window Length: 35
      Eye Window: _______XXXXX____________________________
    Uplink 20:
      Optimal Phase: 27
      Window Length: 36
      Eye Window: ______XXXX______________________________
    Uplink 21:
      Optimal Phase: 26
      Window Length: 35
      Eye Window: ____XXXXX_______________________________
    Uplink 22:
      Optimal Phase: 26
      Window Length: 35
      Eye Window: ____XXXXX_______________________________
    Uplink 23:
      Optimal Phase: 23
      Window Length: 35
      Eye Window: _XXXXX__________________________________
    Uplink 24:
      Optimal Phase: 13
      Window Length: 35
      Eye Window: _______________________________XXXXX____
    Uplink 25:
      Optimal Phase: 17
      Window Length: 35
      Eye Window: ___________________________________XXXXX
    Uplink 26:
      Optimal Phase: 12
      Window Length: 35
      Eye Window: ______________________________XXXXX_____
    Uplink 27:
      Optimal Phase: 16
      Window Length: 35
      Eye Window: __________________________________XXXXX_
    Uplink 28:
      Optimal Phase: 16
      Window Length: 34
      Eye Window: __________________________________XXXXXX
    Uplink 29:
      Optimal Phase: 18
      Window Length: 33
      Eye Window: XX_________________________________XXXXX
    Uplink 30:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 31:
      Optimal Phase: 18
      Window Length: 33
      Eye Window: XX_________________________________XXXXX
]
15:06:36:setup_element:INFO:	Beginning SMX ASICs map scan
15:06:36:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
15:06:36:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
15:06:36:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
15:06:36:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
15:06:36:uplink:INFO:	Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
15:06:36:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 0, uplink 17
15:06:36:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 1, uplink 16
15:06:36:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 24
15:06:36:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 25
15:06:36:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 0, uplink 19
15:06:36:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 1, uplink 18
15:06:36:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 26
15:06:36:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 27
15:06:37:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 0, uplink 21
15:06:37:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 1, uplink 20
15:06:37:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 28
15:06:37:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 29
15:06:37:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 0, uplink 23
15:06:37:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 1, uplink 22
15:06:37:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 30
15:06:37:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 31
15:06:38:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x0: (ASIC uplink, uplink): (0, 17), (1, 16)
    ASIC address 0x1: (ASIC uplink, uplink): (0, 24), (1, 25)
    ASIC address 0x2: (ASIC uplink, uplink): (0, 19), (1, 18)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x4: (ASIC uplink, uplink): (0, 21), (1, 20)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x6: (ASIC uplink, uplink): (0, 23), (1, 22)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 30), (1, 31)
  Clock Phase Characteristic:
    Optimal Phase: 31
    Window Length: 69
    Eye Windows:
      Uplink 16: _____________________________________________________________________XXXXXXXX___
      Uplink 17: _____________________________________________________________________XXXXXXXX___
      Uplink 18: ____________________________________________________________________XXXXXXX_____
      Uplink 19: ____________________________________________________________________XXXXXXX_____
      Uplink 20: ____________________________________________________________________XXXXXX______
      Uplink 21: ____________________________________________________________________XXXXXX______
      Uplink 22: ___________________________________________________________________XXXXXXXX_____
      Uplink 23: ___________________________________________________________________XXXXXXXX_____
      Uplink 24: __________________________________________________________________XXXXXXXX______
      Uplink 25: __________________________________________________________________XXXXXXXX______
      Uplink 26: ________________________________________________________________________________
      Uplink 27: ________________________________________________________________________________
      Uplink 28: __________________________________________________________________XXXXXXXX______
      Uplink 29: __________________________________________________________________XXXXXXXX______
      Uplink 30: _____________________________________________________________________XXXXXXX____
      Uplink 31: _____________________________________________________________________XXXXXXX____
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 37
      Window Length: 36
      Eye Window: ________________XXXX____________________
    Uplink 17:
      Optimal Phase: 33
      Window Length: 36
      Eye Window: ____________XXXX________________________
    Uplink 18:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 19:
      Optimal Phase: 29
      Window Length: 35
      Eye Window: _______XXXXX____________________________
    Uplink 20:
      Optimal Phase: 27
      Window Length: 36
      Eye Window: ______XXXX______________________________
    Uplink 21:
      Optimal Phase: 26
      Window Length: 35
      Eye Window: ____XXXXX_______________________________
    Uplink 22:
      Optimal Phase: 26
      Window Length: 35
      Eye Window: ____XXXXX_______________________________
    Uplink 23:
      Optimal Phase: 23
      Window Length: 35
      Eye Window: _XXXXX__________________________________
    Uplink 24:
      Optimal Phase: 13
      Window Length: 35
      Eye Window: _______________________________XXXXX____
    Uplink 25:
      Optimal Phase: 17
      Window Length: 35
      Eye Window: ___________________________________XXXXX
    Uplink 26:
      Optimal Phase: 12
      Window Length: 35
      Eye Window: ______________________________XXXXX_____
    Uplink 27:
      Optimal Phase: 16
      Window Length: 35
      Eye Window: __________________________________XXXXX_
    Uplink 28:
      Optimal Phase: 16
      Window Length: 34
      Eye Window: __________________________________XXXXXX
    Uplink 29:
      Optimal Phase: 18
      Window Length: 33
      Eye Window: XX_________________________________XXXXX
    Uplink 30:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 31:
      Optimal Phase: 18
      Window Length: 33
      Eye Window: XX_________________________________XXXXX

15:06:38:setup_element:INFO:	Performing Elink synchronization
15:06:38:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
15:06:38:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
15:06:38:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
15:06:38:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
15:06:38:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 3
15:06:38:uplink:INFO:	Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
15:06:39:ST3_emu:INFO:	Number of chips: 8
15:06:39:ST3_emu:INFO:	Chip address:  	0x0
15:06:39:ST3_emu:INFO:	Chip address:  	0x1
15:06:39:ST3_emu:INFO:	Chip address:  	0x2
15:06:39:ST3_emu:INFO:	Chip address:  	0x3
15:06:39:ST3_emu:INFO:	Chip address:  	0x4
15:06:39:ST3_emu:INFO:	Chip address:  	0x5
15:06:39:ST3_emu:INFO:	Chip address:  	0x6
15:06:39:ST3_emu:INFO:	Chip address:  	0x7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_0
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_2
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_4
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_6
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_7
15:06:40:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
15:06:40:febtest:INFO:	0-0 | XA-000-08-002-000-003-143-10 |  40.9 | 1165.6
15:06:40:febtest:INFO:	0-1 | XA-000-08-002-000-002-015-13 |  40.9 | 1183.3
15:06:40:febtest:INFO:	0-2 | XA-000-08-001-064-061-184-14 |  47.3 | 1147.8
15:06:40:febtest:INFO:	0-3 | XA-000-08-002-000-002-018-10 |  50.4 | 1153.7
15:06:41:febtest:INFO:	0-4 | XA-000-08-002-000-003-142-10 |  37.7 | 1183.3
15:06:41:febtest:INFO:	0-5 | XA-000-08-002-000-003-140-10 |  34.6 | 1212.7
15:06:41:febtest:INFO:	0-6 | XA-000-08-002-000-003-146-13 |  25.1 | 1224.5
15:06:41:febtest:INFO:	0-7 | XA-000-08-002-000-003-145-13 |  34.6 | 1206.9
15:06:41:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:06:45:ST3_smx:INFO:	chip: 0-0 	 31.389742 C 	 1189.190035 mV
15:06:45:ST3_smx:INFO:	# loops 0
15:06:47:ST3_smx:INFO:	# loops 1
15:06:49:ST3_smx:INFO:	# loops 2
15:06:50:ST3_smx:INFO:	# loops 3
15:06:52:ST3_smx:INFO:	# loops 4
15:06:54:ST3_smx:INFO:	Total # of broken channels: 0
15:06:54:ST3_smx:INFO:	List of broken channels: []
15:06:54:ST3_smx:INFO:	Total # of broken channels: 0
15:06:54:ST3_smx:INFO:	List of broken channels: []
15:06:54:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:06:58:ST3_smx:INFO:	chip: 0-1 	 47.250730 C 	 1153.732915 mV
15:06:58:ST3_smx:INFO:	# loops 0
15:07:00:ST3_smx:INFO:	# loops 1
15:07:01:ST3_smx:INFO:	# loops 2
15:07:03:ST3_smx:INFO:	# loops 3
15:07:05:ST3_smx:INFO:	# loops 4
15:07:07:ST3_smx:INFO:	Total # of broken channels: 0
15:07:07:ST3_smx:INFO:	List of broken channels: []
15:07:07:ST3_smx:INFO:	Total # of broken channels: 0
15:07:07:ST3_smx:INFO:	List of broken channels: []
15:07:07:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:07:11:ST3_smx:INFO:	chip: 0-2 	 53.612520 C 	 1129.995435 mV
15:07:11:ST3_smx:INFO:	# loops 0
15:07:13:ST3_smx:INFO:	# loops 1
15:07:14:ST3_smx:INFO:	# loops 2
15:07:16:ST3_smx:INFO:	# loops 3
15:07:18:ST3_smx:INFO:	# loops 4
15:07:19:ST3_smx:INFO:	Total # of broken channels: 1
15:07:19:ST3_smx:INFO:	List of broken channels: [126]
15:07:19:ST3_smx:INFO:	Total # of broken channels: 1
15:07:19:ST3_smx:INFO:	List of broken channels: [126]
15:07:20:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:07:24:ST3_smx:INFO:	chip: 0-3 	 53.612520 C 	 1141.874115 mV
15:07:24:ST3_smx:INFO:	# loops 0
15:07:26:ST3_smx:INFO:	# loops 1
15:07:27:ST3_smx:INFO:	# loops 2
15:07:29:ST3_smx:INFO:	# loops 3
15:07:31:ST3_smx:INFO:	# loops 4
15:07:32:ST3_smx:INFO:	Total # of broken channels: 0
15:07:32:ST3_smx:INFO:	List of broken channels: []
15:07:32:ST3_smx:INFO:	Total # of broken channels: 0
15:07:32:ST3_smx:INFO:	List of broken channels: []
15:07:33:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:07:37:ST3_smx:INFO:	chip: 0-4 	 37.726682 C 	 1183.292940 mV
15:07:37:ST3_smx:INFO:	# loops 0
15:07:38:ST3_smx:INFO:	# loops 1
15:07:40:ST3_smx:INFO:	# loops 2
15:07:42:ST3_smx:INFO:	# loops 3
15:07:44:ST3_smx:INFO:	# loops 4
15:07:45:ST3_smx:INFO:	Total # of broken channels: 1
15:07:45:ST3_smx:INFO:	List of broken channels: [7]
15:07:45:ST3_smx:INFO:	Total # of broken channels: 19
15:07:45:ST3_smx:INFO:	List of broken channels: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 37, 39]
15:07:46:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:07:50:ST3_smx:INFO:	chip: 0-5 	 34.556970 C 	 1212.728715 mV
15:07:50:ST3_smx:INFO:	# loops 0
15:07:52:ST3_smx:INFO:	# loops 1
15:07:53:ST3_smx:INFO:	# loops 2
15:07:55:ST3_smx:INFO:	# loops 3
15:07:57:ST3_smx:INFO:	# loops 4
15:07:59:ST3_smx:INFO:	Total # of broken channels: 0
15:07:59:ST3_smx:INFO:	List of broken channels: []
15:07:59:ST3_smx:INFO:	Total # of broken channels: 0
15:07:59:ST3_smx:INFO:	List of broken channels: []
15:07:59:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:08:03:ST3_smx:INFO:	chip: 0-6 	 40.898880 C 	 1183.292940 mV
15:08:03:ST3_smx:INFO:	# loops 0
15:08:05:ST3_smx:INFO:	# loops 1
15:08:06:ST3_smx:INFO:	# loops 2
15:08:08:ST3_smx:INFO:	# loops 3
15:08:10:ST3_smx:INFO:	# loops 4
15:08:11:ST3_smx:INFO:	Total # of broken channels: 0
15:08:11:ST3_smx:INFO:	List of broken channels: []
15:08:11:ST3_smx:INFO:	Total # of broken channels: 0
15:08:11:ST3_smx:INFO:	List of broken channels: []
15:08:12:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
15:08:16:ST3_smx:INFO:	chip: 0-7 	 37.726682 C 	 1200.969315 mV
15:08:16:ST3_smx:INFO:	# loops 0
15:08:17:ST3_smx:INFO:	# loops 1
15:08:19:ST3_smx:INFO:	# loops 2
15:08:21:ST3_smx:INFO:	# loops 3
15:08:23:ST3_smx:INFO:	# loops 4
15:08:24:ST3_smx:INFO:	Total # of broken channels: 0
15:08:24:ST3_smx:INFO:	List of broken channels: []
15:08:24:ST3_smx:INFO:	Total # of broken channels: 0
15:08:24:ST3_smx:INFO:	List of broken channels: []
15:08:25:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
15:08:25:febtest:INFO:	0-0 | XA-000-08-002-000-003-143-10 |  34.6 | 1183.3
15:08:25:febtest:INFO:	0-1 | XA-000-08-002-000-002-015-13 |  50.4 | 1147.8
15:08:26:febtest:INFO:	0-2 | XA-000-08-001-064-061-184-14 |  53.6 | 1124.0
15:08:26:febtest:INFO:	0-3 | XA-000-08-002-000-002-018-10 |  60.0 | 1135.9
15:08:26:febtest:INFO:	0-4 | XA-000-08-002-000-003-142-10 |  37.7 | 1177.4
15:08:26:febtest:INFO:	0-5 | XA-000-08-002-000-003-140-10 |  37.7 | 1201.0
15:08:26:febtest:INFO:	0-6 | XA-000-08-002-000-003-146-13 |  37.7 | 1183.3
15:08:27:febtest:INFO:	0-7 | XA-000-08-002-000-003-145-13 |  37.7 | 1201.0
15:08:54:ST3_Shared:INFO:	/home/cbm/public_html/Production_LogDir//FEB/FEB_1013/A//TestDate_2023_09_13-15_06_27/