07:51:19:ST3_hmp4040:INFO:	HAMEG,HMP2030,017836163,HW50010002/SW2.30
07:51:20:febtest:INFO:	FEB8.2 selected
07:51:20:febtest:INFO:	FEB8.2 selected
07:51:56:ST3_Shared:INFO:	Listo of operators:Olga B.; 
07:52:11:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
07:52:19:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:52:19:ST3_Shared:INFO:	-------------------------FEB-Sensor-------------------------
07:52:19:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:52:20:febtest:INFO:	Tsting FEB with SN 1035
07:52:21:smx_tester:INFO:	Scanning setup
07:52:21:elinks:INFO:	Disabling clock on downlink 0
07:52:21:elinks:INFO:	Disabling clock on downlink 1
07:52:21:elinks:INFO:	Disabling clock on downlink 2
07:52:21:elinks:INFO:	Disabling clock on downlink 3
07:52:21:elinks:INFO:	Disabling clock on downlink 4
07:52:21:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:52:21:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
07:52:21:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:52:21:elinks:INFO:	Disabling clock on downlink 0
07:52:21:elinks:INFO:	Disabling clock on downlink 1
07:52:21:elinks:INFO:	Disabling clock on downlink 2
07:52:21:elinks:INFO:	Disabling clock on downlink 3
07:52:21:elinks:INFO:	Disabling clock on downlink 4
07:52:21:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:52:21:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
07:52:21:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:52:21:elinks:INFO:	Disabling clock on downlink 0
07:52:21:elinks:INFO:	Disabling clock on downlink 1
07:52:21:elinks:INFO:	Disabling clock on downlink 2
07:52:21:elinks:INFO:	Disabling clock on downlink 3
07:52:21:elinks:INFO:	Disabling clock on downlink 4
07:52:21:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:52:21:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:52:21:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:52:21:elinks:INFO:	Disabling clock on downlink 0
07:52:21:elinks:INFO:	Disabling clock on downlink 1
07:52:21:elinks:INFO:	Disabling clock on downlink 2
07:52:22:elinks:INFO:	Disabling clock on downlink 3
07:52:22:elinks:INFO:	Disabling clock on downlink 4
07:52:22:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:52:22:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 16
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 17
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 18
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 19
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 20
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 21
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 22
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 23
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 24
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 25
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 26
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 27
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 28
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 29
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 30
07:52:22:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 31
07:52:22:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:52:22:elinks:INFO:	Disabling clock on downlink 0
07:52:22:elinks:INFO:	Disabling clock on downlink 1
07:52:22:elinks:INFO:	Disabling clock on downlink 2
07:52:22:elinks:INFO:	Disabling clock on downlink 3
07:52:22:elinks:INFO:	Disabling clock on downlink 4
07:52:22:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:52:22:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
07:52:22:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:52:22:setup_element:INFO:	Scanning clock phase
07:52:22:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:52:22:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
07:52:22:setup_element:INFO:	Clock phase scan results for group 0, downlink 3
07:52:22:setup_element:INFO:	Eye window for uplink 16: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:52:22:setup_element:INFO:	Eye window for uplink 17: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:52:22:setup_element:INFO:	Eye window for uplink 18: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:52:22:setup_element:INFO:	Eye window for uplink 19: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:52:22:setup_element:INFO:	Eye window for uplink 20: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
07:52:22:setup_element:INFO:	Eye window for uplink 21: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
07:52:22:setup_element:INFO:	Eye window for uplink 22: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:52:22:setup_element:INFO:	Eye window for uplink 23: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:52:22:setup_element:INFO:	Eye window for uplink 24: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
07:52:22:setup_element:INFO:	Eye window for uplink 25: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
07:52:22:setup_element:INFO:	Eye window for uplink 26: _________________________________________________________________XXXXXXXX_______
Clock Delay: 28
07:52:22:setup_element:INFO:	Eye window for uplink 27: _________________________________________________________________XXXXXXXX_______
Clock Delay: 28
07:52:22:setup_element:INFO:	Eye window for uplink 28: _________________________________________________________________XXXXXXXX_______
Clock Delay: 28
07:52:22:setup_element:INFO:	Eye window for uplink 29: _________________________________________________________________XXXXXXXX_______
Clock Delay: 28
07:52:22:setup_element:INFO:	Eye window for uplink 30: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:52:22:setup_element:INFO:	Eye window for uplink 31: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:52:22:setup_element:INFO:	Setting the clock phase to 29 for group 0, downlink 3
07:52:22:setup_element:INFO:	Scanning data phases
07:52:22:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:52:22:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
07:52:28:setup_element:INFO:	Data phase scan results for group 0, downlink 3
07:52:28:setup_element:INFO:	Eye window for uplink 16: _________________XXXX___________________
Data delay found: 38
07:52:28:setup_element:INFO:	Eye window for uplink 17: _____________XXXX_______________________
Data delay found: 34
07:52:28:setup_element:INFO:	Eye window for uplink 18: _______________XXXXX____________________
Data delay found: 37
07:52:28:setup_element:INFO:	Eye window for uplink 19: ____________XXXXX_______________________
Data delay found: 34
07:52:28:setup_element:INFO:	Eye window for uplink 20: ________XXXXX___________________________
Data delay found: 30
07:52:28:setup_element:INFO:	Eye window for uplink 21: ______XXXXX_____________________________
Data delay found: 28
07:52:28:setup_element:INFO:	Eye window for uplink 22: _____XXXXX______________________________
Data delay found: 27
07:52:28:setup_element:INFO:	Eye window for uplink 23: ___XXXX_________________________________
Data delay found: 24
07:52:28:setup_element:INFO:	Eye window for uplink 24: _________________________________XXXXXX_
Data delay found: 15
07:52:28:setup_element:INFO:	Eye window for uplink 25: XXX__________________________________XXX
Data delay found: 19
07:52:28:setup_element:INFO:	Eye window for uplink 26: _______________________________XXXXX____
Data delay found: 13
07:52:28:setup_element:INFO:	Eye window for uplink 27: X__________________________________XXXXX
Data delay found: 17
07:52:28:setup_element:INFO:	Eye window for uplink 28: __________________________________XXXXX_
Data delay found: 16
07:52:28:setup_element:INFO:	Eye window for uplink 29: XX__________________________________XXXX
Data delay found: 18
07:52:28:setup_element:INFO:	Eye window for uplink 30: XX__________________________________XXXX
Data delay found: 18
07:52:28:setup_element:INFO:	Eye window for uplink 31: X_________________________________XXXXX_
Data delay found: 17
07:52:28:setup_element:INFO:	Setting the data phase to 38 for uplink 16
07:52:28:setup_element:INFO:	Setting the data phase to 34 for uplink 17
07:52:28:setup_element:INFO:	Setting the data phase to 37 for uplink 18
07:52:28:setup_element:INFO:	Setting the data phase to 34 for uplink 19
07:52:28:setup_element:INFO:	Setting the data phase to 30 for uplink 20
07:52:28:setup_element:INFO:	Setting the data phase to 28 for uplink 21
07:52:28:setup_element:INFO:	Setting the data phase to 27 for uplink 22
07:52:28:setup_element:INFO:	Setting the data phase to 24 for uplink 23
07:52:28:setup_element:INFO:	Setting the data phase to 15 for uplink 24
07:52:28:setup_element:INFO:	Setting the data phase to 19 for uplink 25
07:52:28:setup_element:INFO:	Setting the data phase to 13 for uplink 26
07:52:28:setup_element:INFO:	Setting the data phase to 17 for uplink 27
07:52:28:setup_element:INFO:	Setting the data phase to 16 for uplink 28
07:52:28:setup_element:INFO:	Setting the data phase to 18 for uplink 29
07:52:28:setup_element:INFO:	Setting the data phase to 18 for uplink 30
07:52:28:setup_element:INFO:	Setting the data phase to 17 for uplink 31
07:52:28:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 29
    Window Length: 70
    Eye Windows:
      Uplink 16: ____________________________________________________________________XXXXXXX_____
      Uplink 17: ____________________________________________________________________XXXXXXX_____
      Uplink 18: ____________________________________________________________________XXXXXXX_____
      Uplink 19: ____________________________________________________________________XXXXXXX_____
      Uplink 20: ___________________________________________________________________XXXXXXXX_____
      Uplink 21: ___________________________________________________________________XXXXXXXX_____
      Uplink 22: ____________________________________________________________________XXXXXXX_____
      Uplink 23: ____________________________________________________________________XXXXXXX_____
      Uplink 24: __________________________________________________________________XXXXXXXX______
      Uplink 25: __________________________________________________________________XXXXXXXX______
      Uplink 26: _________________________________________________________________XXXXXXXX_______
      Uplink 27: _________________________________________________________________XXXXXXXX_______
      Uplink 28: _________________________________________________________________XXXXXXXX_______
      Uplink 29: _________________________________________________________________XXXXXXXX_______
      Uplink 30: ____________________________________________________________________XXXXXXX_____
      Uplink 31: ____________________________________________________________________XXXXXXX_____
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 38
      Window Length: 36
      Eye Window: _________________XXXX___________________
    Uplink 17:
      Optimal Phase: 34
      Window Length: 36
      Eye Window: _____________XXXX_______________________
    Uplink 18:
      Optimal Phase: 37
      Window Length: 35
      Eye Window: _______________XXXXX____________________
    Uplink 19:
      Optimal Phase: 34
      Window Length: 35
      Eye Window: ____________XXXXX_______________________
    Uplink 20:
      Optimal Phase: 30
      Window Length: 35
      Eye Window: ________XXXXX___________________________
    Uplink 21:
      Optimal Phase: 28
      Window Length: 35
      Eye Window: ______XXXXX_____________________________
    Uplink 22:
      Optimal Phase: 27
      Window Length: 35
      Eye Window: _____XXXXX______________________________
    Uplink 23:
      Optimal Phase: 24
      Window Length: 36
      Eye Window: ___XXXX_________________________________
    Uplink 24:
      Optimal Phase: 15
      Window Length: 34
      Eye Window: _________________________________XXXXXX_
    Uplink 25:
      Optimal Phase: 19
      Window Length: 34
      Eye Window: XXX__________________________________XXX
    Uplink 26:
      Optimal Phase: 13
      Window Length: 35
      Eye Window: _______________________________XXXXX____
    Uplink 27:
      Optimal Phase: 17
      Window Length: 34
      Eye Window: X__________________________________XXXXX
    Uplink 28:
      Optimal Phase: 16
      Window Length: 35
      Eye Window: __________________________________XXXXX_
    Uplink 29:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 30:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 31:
      Optimal Phase: 17
      Window Length: 33
      Eye Window: X_________________________________XXXXX_
]
07:52:28:setup_element:INFO:	Beginning SMX ASICs map scan
07:52:28:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:52:28:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
07:52:28:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
07:52:28:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
07:52:28:uplink:INFO:	Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
07:52:28:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 0, uplink 17
07:52:28:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 1, uplink 16
07:52:28:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 24
07:52:28:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 25
07:52:28:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 0, uplink 19
07:52:28:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 1, uplink 18
07:52:29:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 26
07:52:29:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 27
07:52:29:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 0, uplink 21
07:52:29:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 1, uplink 20
07:52:29:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 28
07:52:29:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 29
07:52:29:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 0, uplink 23
07:52:29:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 1, uplink 22
07:52:29:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 30
07:52:29:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 31
07:52:31:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x0: (ASIC uplink, uplink): (0, 17), (1, 16)
    ASIC address 0x1: (ASIC uplink, uplink): (0, 24), (1, 25)
    ASIC address 0x2: (ASIC uplink, uplink): (0, 19), (1, 18)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x4: (ASIC uplink, uplink): (0, 21), (1, 20)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x6: (ASIC uplink, uplink): (0, 23), (1, 22)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 30), (1, 31)
  Clock Phase Characteristic:
    Optimal Phase: 29
    Window Length: 70
    Eye Windows:
      Uplink 16: ____________________________________________________________________XXXXXXX_____
      Uplink 17: ____________________________________________________________________XXXXXXX_____
      Uplink 18: ____________________________________________________________________XXXXXXX_____
      Uplink 19: ____________________________________________________________________XXXXXXX_____
      Uplink 20: ___________________________________________________________________XXXXXXXX_____
      Uplink 21: ___________________________________________________________________XXXXXXXX_____
      Uplink 22: ____________________________________________________________________XXXXXXX_____
      Uplink 23: ____________________________________________________________________XXXXXXX_____
      Uplink 24: __________________________________________________________________XXXXXXXX______
      Uplink 25: __________________________________________________________________XXXXXXXX______
      Uplink 26: _________________________________________________________________XXXXXXXX_______
      Uplink 27: _________________________________________________________________XXXXXXXX_______
      Uplink 28: _________________________________________________________________XXXXXXXX_______
      Uplink 29: _________________________________________________________________XXXXXXXX_______
      Uplink 30: ____________________________________________________________________XXXXXXX_____
      Uplink 31: ____________________________________________________________________XXXXXXX_____
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 38
      Window Length: 36
      Eye Window: _________________XXXX___________________
    Uplink 17:
      Optimal Phase: 34
      Window Length: 36
      Eye Window: _____________XXXX_______________________
    Uplink 18:
      Optimal Phase: 37
      Window Length: 35
      Eye Window: _______________XXXXX____________________
    Uplink 19:
      Optimal Phase: 34
      Window Length: 35
      Eye Window: ____________XXXXX_______________________
    Uplink 20:
      Optimal Phase: 30
      Window Length: 35
      Eye Window: ________XXXXX___________________________
    Uplink 21:
      Optimal Phase: 28
      Window Length: 35
      Eye Window: ______XXXXX_____________________________
    Uplink 22:
      Optimal Phase: 27
      Window Length: 35
      Eye Window: _____XXXXX______________________________
    Uplink 23:
      Optimal Phase: 24
      Window Length: 36
      Eye Window: ___XXXX_________________________________
    Uplink 24:
      Optimal Phase: 15
      Window Length: 34
      Eye Window: _________________________________XXXXXX_
    Uplink 25:
      Optimal Phase: 19
      Window Length: 34
      Eye Window: XXX__________________________________XXX
    Uplink 26:
      Optimal Phase: 13
      Window Length: 35
      Eye Window: _______________________________XXXXX____
    Uplink 27:
      Optimal Phase: 17
      Window Length: 34
      Eye Window: X__________________________________XXXXX
    Uplink 28:
      Optimal Phase: 16
      Window Length: 35
      Eye Window: __________________________________XXXXX_
    Uplink 29:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 30:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 31:
      Optimal Phase: 17
      Window Length: 33
      Eye Window: X_________________________________XXXXX_

07:52:31:setup_element:INFO:	Performing Elink synchronization
07:52:31:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:52:31:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
07:52:31:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
07:52:31:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
07:52:31:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 3
07:52:31:uplink:INFO:	Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
07:52:31:ST3_emu:INFO:	Number of chips: 8
07:52:31:ST3_emu:INFO:	Chip address:  	0x0
07:52:31:ST3_emu:INFO:	Chip address:  	0x1
07:52:31:ST3_emu:INFO:	Chip address:  	0x2
07:52:31:ST3_emu:INFO:	Chip address:  	0x3
07:52:31:ST3_emu:INFO:	Chip address:  	0x4
07:52:31:ST3_emu:INFO:	Chip address:  	0x5
07:52:31:ST3_emu:INFO:	Chip address:  	0x6
07:52:31:ST3_emu:INFO:	Chip address:  	0x7
07:52:32:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
07:52:32:febtest:INFO:	0-0 | XA-000-08-001-064-038-144-14 |  31.4 | 1189.2
07:52:32:febtest:INFO:	0-1 | XA-000-08-001-064-038-232-02 |  37.7 | 1159.7
07:52:33:febtest:INFO:	0-2 | XA-000-08-001-064-038-192-12 |  25.1 | 1201.0
07:52:33:febtest:INFO:	0-3 | XA-000-08-001-064-039-120-02 |  25.1 | 1206.9
07:52:33:febtest:INFO:	0-4 | XA-000-08-001-064-039-008-14 |  28.2 | 1201.0
07:52:33:febtest:INFO:	0-5 | XA-000-08-001-064-039-112-02 |  21.9 | 1212.7
07:52:33:febtest:INFO:	0-6 | XA-000-08-001-064-038-208-11 |  15.6 | 1242.0
07:52:34:febtest:INFO:	0-7 | XA-000-08-001-064-039-136-04 |  34.6 | 1177.4
07:52:34:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:52:38:ST3_smx:INFO:	chip: 0-0 	 31.389742 C 	 1171.483840 mV
07:52:38:ST3_smx:INFO:	# loops 0
07:52:39:ST3_smx:INFO:	# loops 1
07:52:41:ST3_smx:INFO:	# loops 2
07:52:43:ST3_smx:INFO:	# loops 3
07:52:44:ST3_smx:INFO:	# loops 4
07:52:46:ST3_smx:INFO:	Total # of broken channels: 0
07:52:46:ST3_smx:INFO:	List of broken channels: []
07:52:46:ST3_smx:INFO:	Total # of broken channels: 0
07:52:46:ST3_smx:INFO:	List of broken channels: []
07:52:47:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:52:51:ST3_smx:INFO:	chip: 0-1 	 37.726682 C 	 1159.654860 mV
07:52:51:ST3_smx:INFO:	# loops 0
07:52:53:ST3_smx:INFO:	# loops 1
07:52:54:ST3_smx:INFO:	# loops 2
07:52:56:ST3_smx:INFO:	# loops 3
07:52:58:ST3_smx:INFO:	# loops 4
07:52:59:ST3_smx:INFO:	Total # of broken channels: 0
07:52:59:ST3_smx:INFO:	List of broken channels: []
07:52:59:ST3_smx:INFO:	Total # of broken channels: 0
07:52:59:ST3_smx:INFO:	List of broken channels: []
07:53:00:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:53:04:ST3_smx:INFO:	chip: 0-2 	 25.062742 C 	 1195.082160 mV
07:53:04:ST3_smx:INFO:	# loops 0
07:53:05:ST3_smx:INFO:	# loops 1
07:53:07:ST3_smx:INFO:	# loops 2
07:53:08:ST3_smx:INFO:	# loops 3
07:53:10:ST3_smx:INFO:	# loops 4
07:53:12:ST3_smx:INFO:	Total # of broken channels: 0
07:53:12:ST3_smx:INFO:	List of broken channels: []
07:53:12:ST3_smx:INFO:	Total # of broken channels: 2
07:53:12:ST3_smx:INFO:	List of broken channels: [1, 57]
07:53:12:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:53:16:ST3_smx:INFO:	chip: 0-3 	 28.225000 C 	 1183.292940 mV
07:53:16:ST3_smx:INFO:	# loops 0
07:53:18:ST3_smx:INFO:	# loops 1
07:53:19:ST3_smx:INFO:	# loops 2
07:53:21:ST3_smx:INFO:	# loops 3
07:53:23:ST3_smx:INFO:	# loops 4
07:53:24:ST3_smx:INFO:	Total # of broken channels: 0
07:53:24:ST3_smx:INFO:	List of broken channels: []
07:53:24:ST3_smx:INFO:	Total # of broken channels: 0
07:53:24:ST3_smx:INFO:	List of broken channels: []
07:53:25:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:53:29:ST3_smx:INFO:	chip: 0-4 	 37.726682 C 	 1177.390875 mV
07:53:29:ST3_smx:INFO:	# loops 0
07:53:30:ST3_smx:INFO:	# loops 1
07:53:32:ST3_smx:INFO:	# loops 2
07:53:34:ST3_smx:INFO:	# loops 3
07:53:35:ST3_smx:INFO:	# loops 4
07:53:37:ST3_smx:INFO:	Total # of broken channels: 0
07:53:37:ST3_smx:INFO:	List of broken channels: []
07:53:37:ST3_smx:INFO:	Total # of broken channels: 0
07:53:37:ST3_smx:INFO:	List of broken channels: []
07:53:37:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:53:41:ST3_smx:INFO:	chip: 0-5 	 34.556970 C 	 1177.390875 mV
07:53:41:ST3_smx:INFO:	# loops 0
07:53:43:ST3_smx:INFO:	# loops 1
07:53:44:ST3_smx:INFO:	# loops 2
07:53:46:ST3_smx:INFO:	# loops 3
07:53:47:ST3_smx:INFO:	# loops 4
07:53:49:ST3_smx:INFO:	Total # of broken channels: 0
07:53:49:ST3_smx:INFO:	List of broken channels: []
07:53:49:ST3_smx:INFO:	Total # of broken channels: 0
07:53:49:ST3_smx:INFO:	List of broken channels: []
07:53:50:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:53:53:ST3_smx:INFO:	chip: 0-6 	 34.556970 C 	 1177.390875 mV
07:53:53:ST3_smx:INFO:	# loops 0
07:53:55:ST3_smx:INFO:	# loops 1
07:53:56:ST3_smx:INFO:	# loops 2
07:53:58:ST3_smx:INFO:	# loops 3
07:53:59:ST3_smx:INFO:	# loops 4
07:54:01:ST3_smx:INFO:	Total # of broken channels: 0
07:54:01:ST3_smx:INFO:	List of broken channels: []
07:54:01:ST3_smx:INFO:	Total # of broken channels: 0
07:54:01:ST3_smx:INFO:	List of broken channels: []
07:54:02:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:54:05:ST3_smx:INFO:	chip: 0-7 	 34.556970 C 	 1183.292940 mV
07:54:05:ST3_smx:INFO:	# loops 0
07:54:07:ST3_smx:INFO:	# loops 1
07:54:08:ST3_smx:INFO:	# loops 2
07:54:10:ST3_smx:INFO:	# loops 3
07:54:12:ST3_smx:INFO:	# loops 4
07:54:13:ST3_smx:INFO:	Total # of broken channels: 0
07:54:13:ST3_smx:INFO:	List of broken channels: []
07:54:13:ST3_smx:INFO:	Total # of broken channels: 3
07:54:13:ST3_smx:INFO:	List of broken channels: [1, 2, 15]
07:54:14:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
07:54:14:febtest:INFO:	0-0 | XA-000-08-001-064-038-144-14 |  34.6 | 1159.7
07:54:14:febtest:INFO:	0-1 | XA-000-08-001-064-038-232-02 |  37.7 | 1147.8
07:54:14:febtest:INFO:	0-2 | XA-000-08-001-064-038-192-12 |  28.2 | 1195.1
07:54:15:febtest:INFO:	0-3 | XA-000-08-001-064-039-120-02 |  31.4 | 1171.5
07:54:15:febtest:INFO:	0-4 | XA-000-08-001-064-039-008-14 |  37.7 | 1171.5
07:54:15:febtest:INFO:	0-5 | XA-000-08-001-064-039-112-02 |  34.6 | 1171.5
07:54:15:febtest:INFO:	0-6 | XA-000-08-001-064-038-208-11 |  37.7 | 1177.4
07:54:16:febtest:INFO:	0-7 | XA-000-08-001-064-039-136-04 |  34.6 | 1177.4
07:55:02:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:55:02:ST3_Shared:INFO:	-------------------------FEB-Sensor-------------------------
07:55:02:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:55:03:febtest:INFO:	Tsting FEB with SN 1035
07:55:04:smx_tester:INFO:	Scanning setup
07:55:04:elinks:INFO:	Disabling clock on downlink 0
07:55:04:elinks:INFO:	Disabling clock on downlink 1
07:55:04:elinks:INFO:	Disabling clock on downlink 2
07:55:04:elinks:INFO:	Disabling clock on downlink 3
07:55:04:elinks:INFO:	Disabling clock on downlink 4
07:55:04:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:55:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
07:55:04:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:55:04:elinks:INFO:	Disabling clock on downlink 0
07:55:04:elinks:INFO:	Disabling clock on downlink 1
07:55:04:elinks:INFO:	Disabling clock on downlink 2
07:55:04:elinks:INFO:	Disabling clock on downlink 3
07:55:04:elinks:INFO:	Disabling clock on downlink 4
07:55:04:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:55:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
07:55:04:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:55:04:elinks:INFO:	Disabling clock on downlink 0
07:55:04:elinks:INFO:	Disabling clock on downlink 1
07:55:04:elinks:INFO:	Disabling clock on downlink 2
07:55:04:elinks:INFO:	Disabling clock on downlink 3
07:55:04:elinks:INFO:	Disabling clock on downlink 4
07:55:04:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:55:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:55:04:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:55:04:elinks:INFO:	Disabling clock on downlink 0
07:55:04:elinks:INFO:	Disabling clock on downlink 1
07:55:04:elinks:INFO:	Disabling clock on downlink 2
07:55:04:elinks:INFO:	Disabling clock on downlink 3
07:55:04:elinks:INFO:	Disabling clock on downlink 4
07:55:04:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:55:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 16
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 17
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 18
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 19
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 20
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 21
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 22
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 23
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 24
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 25
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 26
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 27
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 28
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 29
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 30
07:55:05:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 31
07:55:05:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:55:05:elinks:INFO:	Disabling clock on downlink 0
07:55:05:elinks:INFO:	Disabling clock on downlink 1
07:55:05:elinks:INFO:	Disabling clock on downlink 2
07:55:05:elinks:INFO:	Disabling clock on downlink 3
07:55:05:elinks:INFO:	Disabling clock on downlink 4
07:55:05:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:55:05:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
07:55:05:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:55:05:setup_element:INFO:	Scanning clock phase
07:55:05:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:55:05:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
07:55:05:setup_element:INFO:	Clock phase scan results for group 0, downlink 3
07:55:05:setup_element:INFO:	Eye window for uplink 16: ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
07:55:05:setup_element:INFO:	Eye window for uplink 17: ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
07:55:05:setup_element:INFO:	Eye window for uplink 18: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:55:05:setup_element:INFO:	Eye window for uplink 19: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:55:05:setup_element:INFO:	Eye window for uplink 20: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
07:55:05:setup_element:INFO:	Eye window for uplink 21: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
07:55:05:setup_element:INFO:	Eye window for uplink 22: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:55:05:setup_element:INFO:	Eye window for uplink 23: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:55:05:setup_element:INFO:	Eye window for uplink 24: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
07:55:05:setup_element:INFO:	Eye window for uplink 25: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
07:55:05:setup_element:INFO:	Eye window for uplink 26: _________________________________________________________________XXXXXXXX_______
Clock Delay: 28
07:55:05:setup_element:INFO:	Eye window for uplink 27: _________________________________________________________________XXXXXXXX_______
Clock Delay: 28
07:55:05:setup_element:INFO:	Eye window for uplink 28: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
07:55:05:setup_element:INFO:	Eye window for uplink 29: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
07:55:05:setup_element:INFO:	Eye window for uplink 30: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:55:05:setup_element:INFO:	Eye window for uplink 31: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
07:55:05:setup_element:INFO:	Setting the clock phase to 30 for group 0, downlink 3
07:55:05:setup_element:INFO:	Scanning data phases
07:55:05:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:55:05:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
07:55:11:setup_element:INFO:	Data phase scan results for group 0, downlink 3
07:55:11:setup_element:INFO:	Eye window for uplink 16: _______________XXXXX____________________
Data delay found: 37
07:55:11:setup_element:INFO:	Eye window for uplink 17: ___________XXXXX________________________
Data delay found: 33
07:55:11:setup_element:INFO:	Eye window for uplink 18: ______________XXXXX_____________________
Data delay found: 36
07:55:11:setup_element:INFO:	Eye window for uplink 19: ___________XXXXX________________________
Data delay found: 33
07:55:11:setup_element:INFO:	Eye window for uplink 20: _______XXXX_____________________________
Data delay found: 28
07:55:11:setup_element:INFO:	Eye window for uplink 21: ____XXXXXX______________________________
Data delay found: 26
07:55:11:setup_element:INFO:	Eye window for uplink 22: ___XXXXX________________________________
Data delay found: 25
07:55:11:setup_element:INFO:	Eye window for uplink 23: _XXXX___________________________________
Data delay found: 22
07:55:11:setup_element:INFO:	Eye window for uplink 24: ________________________________XXXXXX__
Data delay found: 14
07:55:11:setup_element:INFO:	Eye window for uplink 25: X___________________________________XXXX
Data delay found: 18
07:55:11:setup_element:INFO:	Eye window for uplink 26: ______________________________XXXX______
Data delay found: 11
07:55:11:setup_element:INFO:	Eye window for uplink 27: _________________________________XXXXXX_
Data delay found: 15
07:55:11:setup_element:INFO:	Eye window for uplink 28: _________________________________XXXXX__
Data delay found: 15
07:55:11:setup_element:INFO:	Eye window for uplink 29: ___________________________________XXXX_
Data delay found: 16
07:55:11:setup_element:INFO:	Eye window for uplink 30: X__________________________________XXXXX
Data delay found: 17
07:55:11:setup_element:INFO:	Eye window for uplink 31: _________________________________XXXXX__
Data delay found: 15
07:55:11:setup_element:INFO:	Setting the data phase to 37 for uplink 16
07:55:11:setup_element:INFO:	Setting the data phase to 33 for uplink 17
07:55:11:setup_element:INFO:	Setting the data phase to 36 for uplink 18
07:55:11:setup_element:INFO:	Setting the data phase to 33 for uplink 19
07:55:11:setup_element:INFO:	Setting the data phase to 28 for uplink 20
07:55:11:setup_element:INFO:	Setting the data phase to 26 for uplink 21
07:55:11:setup_element:INFO:	Setting the data phase to 25 for uplink 22
07:55:11:setup_element:INFO:	Setting the data phase to 22 for uplink 23
07:55:11:setup_element:INFO:	Setting the data phase to 14 for uplink 24
07:55:11:setup_element:INFO:	Setting the data phase to 18 for uplink 25
07:55:11:setup_element:INFO:	Setting the data phase to 11 for uplink 26
07:55:11:setup_element:INFO:	Setting the data phase to 15 for uplink 27
07:55:11:setup_element:INFO:	Setting the data phase to 15 for uplink 28
07:55:11:setup_element:INFO:	Setting the data phase to 16 for uplink 29
07:55:11:setup_element:INFO:	Setting the data phase to 17 for uplink 30
07:55:11:setup_element:INFO:	Setting the data phase to 15 for uplink 31
07:55:11:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 30
    Window Length: 69
    Eye Windows:
      Uplink 16: ____________________________________________________________________XXXXXXXX____
      Uplink 17: ____________________________________________________________________XXXXXXXX____
      Uplink 18: ____________________________________________________________________XXXXXXX_____
      Uplink 19: ____________________________________________________________________XXXXXXX_____
      Uplink 20: ___________________________________________________________________XXXXXXX______
      Uplink 21: ___________________________________________________________________XXXXXXX______
      Uplink 22: ____________________________________________________________________XXXXXXX_____
      Uplink 23: ____________________________________________________________________XXXXXXX_____
      Uplink 24: __________________________________________________________________XXXXXXXX______
      Uplink 25: __________________________________________________________________XXXXXXXX______
      Uplink 26: _________________________________________________________________XXXXXXXX_______
      Uplink 27: _________________________________________________________________XXXXXXXX_______
      Uplink 28: __________________________________________________________________XXXXXXXX______
      Uplink 29: __________________________________________________________________XXXXXXXX______
      Uplink 30: ____________________________________________________________________XXXXXXX_____
      Uplink 31: ____________________________________________________________________XXXXXXX_____
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 37
      Window Length: 35
      Eye Window: _______________XXXXX____________________
    Uplink 17:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 18:
      Optimal Phase: 36
      Window Length: 35
      Eye Window: ______________XXXXX_____________________
    Uplink 19:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 20:
      Optimal Phase: 28
      Window Length: 36
      Eye Window: _______XXXX_____________________________
    Uplink 21:
      Optimal Phase: 26
      Window Length: 34
      Eye Window: ____XXXXXX______________________________
    Uplink 22:
      Optimal Phase: 25
      Window Length: 35
      Eye Window: ___XXXXX________________________________
    Uplink 23:
      Optimal Phase: 22
      Window Length: 36
      Eye Window: _XXXX___________________________________
    Uplink 24:
      Optimal Phase: 14
      Window Length: 34
      Eye Window: ________________________________XXXXXX__
    Uplink 25:
      Optimal Phase: 18
      Window Length: 35
      Eye Window: X___________________________________XXXX
    Uplink 26:
      Optimal Phase: 11
      Window Length: 36
      Eye Window: ______________________________XXXX______
    Uplink 27:
      Optimal Phase: 15
      Window Length: 34
      Eye Window: _________________________________XXXXXX_
    Uplink 28:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__
    Uplink 29:
      Optimal Phase: 16
      Window Length: 36
      Eye Window: ___________________________________XXXX_
    Uplink 30:
      Optimal Phase: 17
      Window Length: 34
      Eye Window: X__________________________________XXXXX
    Uplink 31:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__
]
07:55:11:setup_element:INFO:	Beginning SMX ASICs map scan
07:55:11:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:55:11:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
07:55:11:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
07:55:11:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
07:55:11:uplink:INFO:	Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
07:55:11:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 0, uplink 17
07:55:11:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 1, uplink 16
07:55:11:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 24
07:55:11:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 25
07:55:11:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 0, uplink 19
07:55:11:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 1, uplink 18
07:55:12:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 26
07:55:12:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 27
07:55:12:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 0, uplink 21
07:55:12:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 1, uplink 20
07:55:12:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 28
07:55:12:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 29
07:55:12:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 0, uplink 23
07:55:12:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 1, uplink 22
07:55:12:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 30
07:55:12:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 31
07:55:14:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x0: (ASIC uplink, uplink): (0, 17), (1, 16)
    ASIC address 0x1: (ASIC uplink, uplink): (0, 24), (1, 25)
    ASIC address 0x2: (ASIC uplink, uplink): (0, 19), (1, 18)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x4: (ASIC uplink, uplink): (0, 21), (1, 20)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x6: (ASIC uplink, uplink): (0, 23), (1, 22)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 30), (1, 31)
  Clock Phase Characteristic:
    Optimal Phase: 30
    Window Length: 69
    Eye Windows:
      Uplink 16: ____________________________________________________________________XXXXXXXX____
      Uplink 17: ____________________________________________________________________XXXXXXXX____
      Uplink 18: ____________________________________________________________________XXXXXXX_____
      Uplink 19: ____________________________________________________________________XXXXXXX_____
      Uplink 20: ___________________________________________________________________XXXXXXX______
      Uplink 21: ___________________________________________________________________XXXXXXX______
      Uplink 22: ____________________________________________________________________XXXXXXX_____
      Uplink 23: ____________________________________________________________________XXXXXXX_____
      Uplink 24: __________________________________________________________________XXXXXXXX______
      Uplink 25: __________________________________________________________________XXXXXXXX______
      Uplink 26: _________________________________________________________________XXXXXXXX_______
      Uplink 27: _________________________________________________________________XXXXXXXX_______
      Uplink 28: __________________________________________________________________XXXXXXXX______
      Uplink 29: __________________________________________________________________XXXXXXXX______
      Uplink 30: ____________________________________________________________________XXXXXXX_____
      Uplink 31: ____________________________________________________________________XXXXXXX_____
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 37
      Window Length: 35
      Eye Window: _______________XXXXX____________________
    Uplink 17:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 18:
      Optimal Phase: 36
      Window Length: 35
      Eye Window: ______________XXXXX_____________________
    Uplink 19:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 20:
      Optimal Phase: 28
      Window Length: 36
      Eye Window: _______XXXX_____________________________
    Uplink 21:
      Optimal Phase: 26
      Window Length: 34
      Eye Window: ____XXXXXX______________________________
    Uplink 22:
      Optimal Phase: 25
      Window Length: 35
      Eye Window: ___XXXXX________________________________
    Uplink 23:
      Optimal Phase: 22
      Window Length: 36
      Eye Window: _XXXX___________________________________
    Uplink 24:
      Optimal Phase: 14
      Window Length: 34
      Eye Window: ________________________________XXXXXX__
    Uplink 25:
      Optimal Phase: 18
      Window Length: 35
      Eye Window: X___________________________________XXXX
    Uplink 26:
      Optimal Phase: 11
      Window Length: 36
      Eye Window: ______________________________XXXX______
    Uplink 27:
      Optimal Phase: 15
      Window Length: 34
      Eye Window: _________________________________XXXXXX_
    Uplink 28:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__
    Uplink 29:
      Optimal Phase: 16
      Window Length: 36
      Eye Window: ___________________________________XXXX_
    Uplink 30:
      Optimal Phase: 17
      Window Length: 34
      Eye Window: X__________________________________XXXXX
    Uplink 31:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__

07:55:14:setup_element:INFO:	Performing Elink synchronization
07:55:14:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:55:14:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
07:55:14:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
07:55:14:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
07:55:14:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 3
07:55:14:uplink:INFO:	Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
07:55:14:ST3_emu:INFO:	Number of chips: 8
07:55:14:ST3_emu:INFO:	Chip address:  	0x0
07:55:14:ST3_emu:INFO:	Chip address:  	0x1
07:55:14:ST3_emu:INFO:	Chip address:  	0x2
07:55:14:ST3_emu:INFO:	Chip address:  	0x3
07:55:14:ST3_emu:INFO:	Chip address:  	0x4
07:55:14:ST3_emu:INFO:	Chip address:  	0x5
07:55:14:ST3_emu:INFO:	Chip address:  	0x6
07:55:14:ST3_emu:INFO:	Chip address:  	0x7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_0
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_2
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_4
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_6
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_7
07:55:15:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
07:55:15:febtest:INFO:	0-0 | XA-000-08-001-064-038-144-14 |  31.4 | 1189.2
07:55:15:febtest:INFO:	0-1 | XA-000-08-001-064-038-232-02 |  40.9 | 1153.7
07:55:15:febtest:INFO:	0-2 | XA-000-08-001-064-038-192-12 |  28.2 | 1201.0
07:55:16:febtest:INFO:	0-3 | XA-000-08-001-064-039-120-02 |  28.2 | 1206.9
07:55:16:febtest:INFO:	0-4 | XA-000-08-001-064-039-008-14 |  31.4 | 1201.0
07:55:16:febtest:INFO:	0-5 | XA-000-08-001-064-039-112-02 |  25.1 | 1212.7
07:55:16:febtest:INFO:	0-6 | XA-000-08-001-064-038-208-11 |  15.6 | 1247.9
07:55:16:febtest:INFO:	0-7 | XA-000-08-001-064-039-136-04 |  37.7 | 1177.4
07:55:16:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:55:20:ST3_smx:INFO:	chip: 0-0 	 34.556970 C 	 1171.483840 mV
07:55:20:ST3_smx:INFO:	# loops 0
07:55:22:ST3_smx:INFO:	# loops 1
07:55:24:ST3_smx:INFO:	# loops 2
07:55:25:ST3_smx:INFO:	# loops 3
07:55:27:ST3_smx:INFO:	# loops 4
07:55:29:ST3_smx:INFO:	Total # of broken channels: 0
07:55:29:ST3_smx:INFO:	List of broken channels: []
07:55:29:ST3_smx:INFO:	Total # of broken channels: 0
07:55:29:ST3_smx:INFO:	List of broken channels: []
07:55:29:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:55:33:ST3_smx:INFO:	chip: 0-1 	 40.898880 C 	 1153.732915 mV
07:55:33:ST3_smx:INFO:	# loops 0
07:55:35:ST3_smx:INFO:	# loops 1
07:55:36:ST3_smx:INFO:	# loops 2
07:55:38:ST3_smx:INFO:	# loops 3
07:55:40:ST3_smx:INFO:	# loops 4
07:55:41:ST3_smx:INFO:	Total # of broken channels: 0
07:55:41:ST3_smx:INFO:	List of broken channels: []
07:55:41:ST3_smx:INFO:	Total # of broken channels: 0
07:55:41:ST3_smx:INFO:	List of broken channels: []
07:55:42:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:55:46:ST3_smx:INFO:	chip: 0-2 	 28.225000 C 	 1195.082160 mV
07:55:46:ST3_smx:INFO:	# loops 0
07:55:47:ST3_smx:INFO:	# loops 1
07:55:49:ST3_smx:INFO:	# loops 2
07:55:50:ST3_smx:INFO:	# loops 3
07:55:52:ST3_smx:INFO:	# loops 4
07:55:54:ST3_smx:INFO:	Total # of broken channels: 0
07:55:54:ST3_smx:INFO:	List of broken channels: []
07:55:54:ST3_smx:INFO:	Total # of broken channels: 0
07:55:54:ST3_smx:INFO:	List of broken channels: []
07:55:54:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:55:58:ST3_smx:INFO:	chip: 0-3 	 31.389742 C 	 1183.292940 mV
07:55:58:ST3_smx:INFO:	# loops 0
07:56:00:ST3_smx:INFO:	# loops 1
07:56:01:ST3_smx:INFO:	# loops 2
07:56:03:ST3_smx:INFO:	# loops 3
07:56:05:ST3_smx:INFO:	# loops 4
07:56:06:ST3_smx:INFO:	Total # of broken channels: 0
07:56:06:ST3_smx:INFO:	List of broken channels: []
07:56:06:ST3_smx:INFO:	Total # of broken channels: 0
07:56:06:ST3_smx:INFO:	List of broken channels: []
07:56:07:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:56:10:ST3_smx:INFO:	chip: 0-4 	 37.726682 C 	 1177.390875 mV
07:56:10:ST3_smx:INFO:	# loops 0
07:56:12:ST3_smx:INFO:	# loops 1
07:56:14:ST3_smx:INFO:	# loops 2
07:56:15:ST3_smx:INFO:	# loops 3
07:56:17:ST3_smx:INFO:	# loops 4
07:56:19:ST3_smx:INFO:	Total # of broken channels: 0
07:56:19:ST3_smx:INFO:	List of broken channels: []
07:56:19:ST3_smx:INFO:	Total # of broken channels: 0
07:56:19:ST3_smx:INFO:	List of broken channels: []
07:56:19:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:56:23:ST3_smx:INFO:	chip: 0-5 	 34.556970 C 	 1171.483840 mV
07:56:23:ST3_smx:INFO:	# loops 0
07:56:25:ST3_smx:INFO:	# loops 1
07:56:26:ST3_smx:INFO:	# loops 2
07:56:28:ST3_smx:INFO:	# loops 3
07:56:30:ST3_smx:INFO:	# loops 4
07:56:31:ST3_smx:INFO:	Total # of broken channels: 0
07:56:31:ST3_smx:INFO:	List of broken channels: []
07:56:31:ST3_smx:INFO:	Total # of broken channels: 0
07:56:31:ST3_smx:INFO:	List of broken channels: []
07:56:32:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:56:35:ST3_smx:INFO:	chip: 0-6 	 37.726682 C 	 1177.390875 mV
07:56:35:ST3_smx:INFO:	# loops 0
07:56:37:ST3_smx:INFO:	# loops 1
07:56:39:ST3_smx:INFO:	# loops 2
07:56:40:ST3_smx:INFO:	# loops 3
07:56:42:ST3_smx:INFO:	# loops 4
07:56:44:ST3_smx:INFO:	Total # of broken channels: 0
07:56:44:ST3_smx:INFO:	List of broken channels: []
07:56:44:ST3_smx:INFO:	Total # of broken channels: 0
07:56:44:ST3_smx:INFO:	List of broken channels: []
07:56:44:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:56:48:ST3_smx:INFO:	chip: 0-7 	 34.556970 C 	 1177.390875 mV
07:56:48:ST3_smx:INFO:	# loops 0
07:56:49:ST3_smx:INFO:	# loops 1
07:56:51:ST3_smx:INFO:	# loops 2
07:56:53:ST3_smx:INFO:	# loops 3
07:56:54:ST3_smx:INFO:	# loops 4
07:56:56:ST3_smx:INFO:	Total # of broken channels: 0
07:56:56:ST3_smx:INFO:	List of broken channels: []
07:56:56:ST3_smx:INFO:	Total # of broken channels: 1
07:56:56:ST3_smx:INFO:	List of broken channels: [2]
07:56:57:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
07:56:57:febtest:INFO:	0-0 | XA-000-08-001-064-038-144-14 |  37.7 | 1159.7
07:56:57:febtest:INFO:	0-1 | XA-000-08-001-064-038-232-02 |  40.9 | 1153.7
07:56:57:febtest:INFO:	0-2 | XA-000-08-001-064-038-192-12 |  31.4 | 1189.2
07:56:57:febtest:INFO:	0-3 | XA-000-08-001-064-039-120-02 |  34.6 | 1171.5
07:56:58:febtest:INFO:	0-4 | XA-000-08-001-064-039-008-14 |  40.9 | 1171.5
07:56:58:febtest:INFO:	0-5 | XA-000-08-001-064-039-112-02 |  37.7 | 1171.5
07:56:58:febtest:INFO:	0-6 | XA-000-08-001-064-038-208-11 |  37.7 | 1171.5
07:56:58:febtest:INFO:	0-7 | XA-000-08-001-064-039-136-04 |  37.7 | 1177.4
07:57:14:ST3_Shared:INFO:	/home/cbm/public_html/Production_LogDir//FEB/FEB_1035/A//TestDate_2023_09_29-07_55_02/