12:52:29:ST3_hmp4040:INFO:	HAMEG,HMP2030,017836163,HW50010002/SW2.30
12:52:29:febtest:INFO:	FEB8.2 selected
12:52:31:ST3_Shared:INFO:	Listo of operators:Olga B.; 
12:52:39:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
12:52:39:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
12:52:41:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
12:52:42:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
12:52:42:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
12:52:43:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
12:52:43:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
12:52:43:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
12:52:44:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
12:52:44:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
12:52:45:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
12:52:45:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
12:52:46:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
12:52:46:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
12:52:47:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
12:52:47:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
12:52:48:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
12:52:48:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
12:52:50:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
12:52:57:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
12:53:02:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
12:53:02:ST3_Shared:INFO:	-----------------------FEB-Microcable-----------------------
12:53:02:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
12:53:03:febtest:INFO:	Tsting FEB with SN 1065
12:53:04:smx_tester:INFO:	Scanning setup
12:53:04:elinks:INFO:	Disabling clock on downlink 0
12:53:04:elinks:INFO:	Disabling clock on downlink 1
12:53:04:elinks:INFO:	Disabling clock on downlink 2
12:53:04:elinks:INFO:	Disabling clock on downlink 3
12:53:04:elinks:INFO:	Disabling clock on downlink 4
12:53:04:setup_element:INFO:	Checking SOS, encoding_mode: SOS
12:53:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
12:53:04:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
12:53:04:elinks:INFO:	Disabling clock on downlink 0
12:53:04:elinks:INFO:	Disabling clock on downlink 1
12:53:04:elinks:INFO:	Disabling clock on downlink 2
12:53:04:elinks:INFO:	Disabling clock on downlink 3
12:53:04:elinks:INFO:	Disabling clock on downlink 4
12:53:04:setup_element:INFO:	Checking SOS, encoding_mode: SOS
12:53:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
12:53:04:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
12:53:04:elinks:INFO:	Disabling clock on downlink 0
12:53:04:elinks:INFO:	Disabling clock on downlink 1
12:53:04:elinks:INFO:	Disabling clock on downlink 2
12:53:04:elinks:INFO:	Disabling clock on downlink 3
12:53:04:elinks:INFO:	Disabling clock on downlink 4
12:53:04:setup_element:INFO:	Checking SOS, encoding_mode: SOS
12:53:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
12:53:04:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
12:53:04:elinks:INFO:	Disabling clock on downlink 0
12:53:04:elinks:INFO:	Disabling clock on downlink 1
12:53:04:elinks:INFO:	Disabling clock on downlink 2
12:53:04:elinks:INFO:	Disabling clock on downlink 3
12:53:04:elinks:INFO:	Disabling clock on downlink 4
12:53:04:setup_element:INFO:	Checking SOS, encoding_mode: SOS
12:53:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
12:53:04:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 24
12:53:04:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 25
12:53:04:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 26
12:53:04:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 27
12:53:04:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 28
12:53:04:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 29
12:53:04:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 30
12:53:04:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 31
12:53:04:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
12:53:04:elinks:INFO:	Disabling clock on downlink 0
12:53:04:elinks:INFO:	Disabling clock on downlink 1
12:53:04:elinks:INFO:	Disabling clock on downlink 2
12:53:04:elinks:INFO:	Disabling clock on downlink 3
12:53:04:elinks:INFO:	Disabling clock on downlink 4
12:53:04:setup_element:INFO:	Checking SOS, encoding_mode: SOS
12:53:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
12:53:05:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
12:53:05:setup_element:INFO:	Scanning clock phase
12:53:05:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
12:53:05:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
12:53:05:setup_element:INFO:	Clock phase scan results for group 0, downlink 3
12:53:05:setup_element:INFO:	Eye window for uplink 24: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
12:53:05:setup_element:INFO:	Eye window for uplink 25: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
12:53:05:setup_element:INFO:	Eye window for uplink 26: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
12:53:05:setup_element:INFO:	Eye window for uplink 27: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
12:53:05:setup_element:INFO:	Eye window for uplink 28: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
12:53:05:setup_element:INFO:	Eye window for uplink 29: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
12:53:05:setup_element:INFO:	Eye window for uplink 30: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
12:53:05:setup_element:INFO:	Eye window for uplink 31: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
12:53:05:setup_element:INFO:	Setting the clock phase to 30 for group 0, downlink 3
12:53:05:setup_element:INFO:	Scanning data phases
12:53:05:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
12:53:05:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
12:53:10:setup_element:INFO:	Data phase scan results for group 0, downlink 3
12:53:10:setup_element:INFO:	Eye window for uplink 24: XX__________________________________XXXX
Data delay found: 18
12:53:10:setup_element:INFO:	Eye window for uplink 25: _XXXX___________________________________
Data delay found: 22
12:53:10:setup_element:INFO:	Eye window for uplink 26: XX__________________________________XXXX
Data delay found: 18
12:53:10:setup_element:INFO:	Eye window for uplink 27: XXXXXX__________________________________
Data delay found: 22
12:53:10:setup_element:INFO:	Eye window for uplink 28: _XXXXX__________________________________
Data delay found: 23
12:53:10:setup_element:INFO:	Eye window for uplink 29: ___XXXXXX_______________________________
Data delay found: 25
12:53:10:setup_element:INFO:	Eye window for uplink 30: XXXX__________________________________XX
Data delay found: 20
12:53:10:setup_element:INFO:	Eye window for uplink 31: XXX_________________________________XXXX
Data delay found: 19
12:53:10:setup_element:INFO:	Setting the data phase to 18 for uplink 24
12:53:10:setup_element:INFO:	Setting the data phase to 22 for uplink 25
12:53:10:setup_element:INFO:	Setting the data phase to 18 for uplink 26
12:53:10:setup_element:INFO:	Setting the data phase to 22 for uplink 27
12:53:10:setup_element:INFO:	Setting the data phase to 23 for uplink 28
12:53:10:setup_element:INFO:	Setting the data phase to 25 for uplink 29
12:53:10:setup_element:INFO:	Setting the data phase to 20 for uplink 30
12:53:10:setup_element:INFO:	Setting the data phase to 19 for uplink 31
12:53:10:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 30
    Window Length: 71
    Eye Windows:
      Uplink 24: __________________________________________________________________XXXXXXXX______
      Uplink 25: __________________________________________________________________XXXXXXXX______
      Uplink 26: __________________________________________________________________XXXXXXXX______
      Uplink 27: __________________________________________________________________XXXXXXXX______
      Uplink 28: ___________________________________________________________________XXXXXXXX_____
      Uplink 29: ___________________________________________________________________XXXXXXXX_____
      Uplink 30: ___________________________________________________________________XXXXXXX______
      Uplink 31: ___________________________________________________________________XXXXXXX______
  Data phase characteristics:
    Uplink 24:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 25:
      Optimal Phase: 22
      Window Length: 36
      Eye Window: _XXXX___________________________________
    Uplink 26:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 27:
      Optimal Phase: 22
      Window Length: 34
      Eye Window: XXXXXX__________________________________
    Uplink 28:
      Optimal Phase: 23
      Window Length: 35
      Eye Window: _XXXXX__________________________________
    Uplink 29:
      Optimal Phase: 25
      Window Length: 34
      Eye Window: ___XXXXXX_______________________________
    Uplink 30:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 31:
      Optimal Phase: 19
      Window Length: 33
      Eye Window: XXX_________________________________XXXX
]
12:53:10:setup_element:INFO:	Beginning SMX ASICs map scan
12:53:10:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
12:53:10:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
12:53:10:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
12:53:10:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
12:53:10:uplink:INFO:	Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
12:53:11:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 24
12:53:11:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 25
12:53:11:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 26
12:53:11:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 27
12:53:11:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 28
12:53:11:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 29
12:53:12:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 30
12:53:12:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 31
12:53:13:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x1: (ASIC uplink, uplink): (0, 24), (1, 25)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 30), (1, 31)
  Clock Phase Characteristic:
    Optimal Phase: 30
    Window Length: 71
    Eye Windows:
      Uplink 24: __________________________________________________________________XXXXXXXX______
      Uplink 25: __________________________________________________________________XXXXXXXX______
      Uplink 26: __________________________________________________________________XXXXXXXX______
      Uplink 27: __________________________________________________________________XXXXXXXX______
      Uplink 28: ___________________________________________________________________XXXXXXXX_____
      Uplink 29: ___________________________________________________________________XXXXXXXX_____
      Uplink 30: ___________________________________________________________________XXXXXXX______
      Uplink 31: ___________________________________________________________________XXXXXXX______
  Data phase characteristics:
    Uplink 24:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 25:
      Optimal Phase: 22
      Window Length: 36
      Eye Window: _XXXX___________________________________
    Uplink 26:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 27:
      Optimal Phase: 22
      Window Length: 34
      Eye Window: XXXXXX__________________________________
    Uplink 28:
      Optimal Phase: 23
      Window Length: 35
      Eye Window: _XXXXX__________________________________
    Uplink 29:
      Optimal Phase: 25
      Window Length: 34
      Eye Window: ___XXXXXX_______________________________
    Uplink 30:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 31:
      Optimal Phase: 19
      Window Length: 33
      Eye Window: XXX_________________________________XXXX

12:53:13:setup_element:INFO:	Performing Elink synchronization
12:53:13:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
12:53:13:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
12:53:13:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
12:53:13:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
12:53:13:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 3
12:53:13:uplink:INFO:	Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
12:53:13:ST3_emu:INFO:	Number of chips: 4
12:53:13:ST3_emu:INFO:	Chip address:  	0x1
12:53:13:ST3_emu:INFO:	Chip address:  	0x3
12:53:13:ST3_emu:INFO:	Chip address:  	0x5
12:53:13:ST3_emu:INFO:	Chip address:  	0x7
12:53:14:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
12:53:14:febtest:INFO:	0-1 | XA-000-08-002-000-001-111-08 |  37.7 | 1147.8
12:53:15:febtest:INFO:	0-3 | XA-000-08-002-000-001-102-08 |  31.4 | 1189.2
12:53:15:febtest:INFO:	0-5 | XA-000-08-002-000-001-101-08 |  31.4 | 1171.5
12:53:15:febtest:INFO:	0-7 | XA-000-08-002-000-001-105-08 |  47.3 | 1135.9
12:53:15:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
12:53:19:ST3_smx:INFO:	chip: 0-1 	 44.073563 C 	 1112.140140 mV
12:53:19:ST3_smx:INFO:	# loops 0
12:53:21:ST3_smx:INFO:	# loops 1
12:53:22:ST3_smx:INFO:	# loops 2
12:53:24:ST3_smx:INFO:	# loops 3
12:53:25:ST3_smx:INFO:	# loops 4
12:53:27:ST3_smx:INFO:	Total # of broken channels: 0
12:53:27:ST3_smx:INFO:	List of broken channels: []
12:53:27:ST3_smx:INFO:	Total # of broken channels: 0
12:53:27:ST3_smx:INFO:	List of broken channels: []
12:53:28:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
12:53:31:ST3_smx:INFO:	chip: 0-3 	 34.556970 C 	 1147.806000 mV
12:53:31:ST3_smx:INFO:	# loops 0
12:53:33:ST3_smx:INFO:	# loops 1
12:53:35:ST3_smx:INFO:	# loops 2
12:53:36:ST3_smx:INFO:	# loops 3
12:53:38:ST3_smx:INFO:	# loops 4
12:53:40:ST3_smx:INFO:	Total # of broken channels: 0
12:53:40:ST3_smx:INFO:	List of broken channels: []
12:53:40:ST3_smx:INFO:	Total # of broken channels: 0
12:53:40:ST3_smx:INFO:	List of broken channels: []
12:53:40:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
12:53:44:ST3_smx:INFO:	chip: 0-5 	 31.389742 C 	 1153.732915 mV
12:53:44:ST3_smx:INFO:	# loops 0
12:53:46:ST3_smx:INFO:	# loops 1
12:53:47:ST3_smx:INFO:	# loops 2
12:53:49:ST3_smx:INFO:	# loops 3
12:53:50:ST3_smx:INFO:	# loops 4
12:53:52:ST3_smx:INFO:	Total # of broken channels: 0
12:53:52:ST3_smx:INFO:	List of broken channels: []
12:53:52:ST3_smx:INFO:	Total # of broken channels: 0
12:53:52:ST3_smx:INFO:	List of broken channels: []
12:53:53:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
12:53:56:ST3_smx:INFO:	chip: 0-7 	 53.612520 C 	 1100.211760 mV
12:53:56:ST3_smx:INFO:	# loops 0
12:53:58:ST3_smx:INFO:	# loops 1
12:53:59:ST3_smx:INFO:	# loops 2
12:54:01:ST3_smx:INFO:	# loops 3
12:54:03:ST3_smx:INFO:	# loops 4
12:54:04:ST3_smx:INFO:	Total # of broken channels: 0
12:54:04:ST3_smx:INFO:	List of broken channels: []
12:54:04:ST3_smx:INFO:	Total # of broken channels: 0
12:54:04:ST3_smx:INFO:	List of broken channels: []
12:54:05:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
12:54:05:febtest:INFO:	0-1 | XA-000-08-002-000-001-111-08 |  47.3 | 1106.2
12:54:05:febtest:INFO:	0-3 | XA-000-08-002-000-001-102-08 |  37.7 | 1141.9
12:54:06:febtest:INFO:	0-5 | XA-000-08-002-000-001-101-08 |  34.6 | 1147.8
12:54:06:febtest:INFO:	0-7 | XA-000-08-002-000-001-105-08 |  53.6 | 1100.2
12:55:28:ST3_Shared:INFO:	Listo of operators:Olga B.; Oleksandr S.; 
12:55:29:ST3_Shared:INFO:	Listo of operators:Kerstin S.; Olga B.; Oleksandr S.; 
12:55:30:ST3_Shared:INFO:	/home/cbm/public_html/Production_LogDir//FEB/FEB_1065/TestDate_2023_10_12-12_53_02/