11:02:33:ST3_hmp4040:INFO:	HAMEG,HMP2030,017836163,HW50010002/SW2.30
11:02:33:febtest:INFO:	FEB8.2 selected
11:02:35:ST3_Shared:INFO:	Listo of operators:Robert V.; 
11:02:49:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
11:02:49:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
11:02:52:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
11:02:52:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
11:02:54:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
11:02:56:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
11:02:56:ST3_Shared:INFO:	-----------------------FEB-Microcable-----------------------
11:02:56:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
11:02:56:febtest:INFO:	Tsting FEB with SN 1066
11:02:57:smx_tester:INFO:	Scanning setup
11:02:57:elinks:INFO:	Disabling clock on downlink 0
11:02:57:elinks:INFO:	Disabling clock on downlink 1
11:02:57:elinks:INFO:	Disabling clock on downlink 2
11:02:57:elinks:INFO:	Disabling clock on downlink 3
11:02:57:elinks:INFO:	Disabling clock on downlink 4
11:02:57:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:02:57:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
11:02:58:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:02:58:elinks:INFO:	Disabling clock on downlink 0
11:02:58:elinks:INFO:	Disabling clock on downlink 1
11:02:58:elinks:INFO:	Disabling clock on downlink 2
11:02:58:elinks:INFO:	Disabling clock on downlink 3
11:02:58:elinks:INFO:	Disabling clock on downlink 4
11:02:58:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:02:58:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
11:02:58:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:02:58:elinks:INFO:	Disabling clock on downlink 0
11:02:58:elinks:INFO:	Disabling clock on downlink 1
11:02:58:elinks:INFO:	Disabling clock on downlink 2
11:02:58:elinks:INFO:	Disabling clock on downlink 3
11:02:58:elinks:INFO:	Disabling clock on downlink 4
11:02:58:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:02:58:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
11:02:58:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:02:58:elinks:INFO:	Disabling clock on downlink 0
11:02:58:elinks:INFO:	Disabling clock on downlink 1
11:02:58:elinks:INFO:	Disabling clock on downlink 2
11:02:58:elinks:INFO:	Disabling clock on downlink 3
11:02:58:elinks:INFO:	Disabling clock on downlink 4
11:02:58:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:02:58:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 16
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 17
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 18
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 19
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 20
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 21
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 22
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 23
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 24
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 25
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 26
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 27
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 28
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 29
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 30
11:02:58:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 31
11:02:58:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:02:58:elinks:INFO:	Disabling clock on downlink 0
11:02:58:elinks:INFO:	Disabling clock on downlink 1
11:02:58:elinks:INFO:	Disabling clock on downlink 2
11:02:58:elinks:INFO:	Disabling clock on downlink 3
11:02:58:elinks:INFO:	Disabling clock on downlink 4
11:02:58:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:02:58:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
11:02:58:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:02:58:setup_element:INFO:	Scanning clock phase
11:02:58:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
11:02:58:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
11:02:59:setup_element:INFO:	Clock phase scan results for group 0, downlink 3
11:02:59:setup_element:INFO:	Eye window for uplink 16: ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
11:02:59:setup_element:INFO:	Eye window for uplink 17: ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
11:02:59:setup_element:INFO:	Eye window for uplink 18: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
11:02:59:setup_element:INFO:	Eye window for uplink 19: ____________________________________________________________________XXXXXXX_____
Clock Delay: 31
11:02:59:setup_element:INFO:	Eye window for uplink 20: ____________________________________________________________________XXXXXX______
Clock Delay: 30
11:02:59:setup_element:INFO:	Eye window for uplink 21: ____________________________________________________________________XXXXXX______
Clock Delay: 30
11:02:59:setup_element:INFO:	Eye window for uplink 22: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
11:02:59:setup_element:INFO:	Eye window for uplink 23: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
11:02:59:setup_element:INFO:	Eye window for uplink 24: _________________________________________________________________XXXXXXXX_______
Clock Delay: 28
11:02:59:setup_element:INFO:	Eye window for uplink 25: _________________________________________________________________XXXXXXXX_______
Clock Delay: 28
11:02:59:setup_element:INFO:	Eye window for uplink 26: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
11:02:59:setup_element:INFO:	Eye window for uplink 27: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
11:02:59:setup_element:INFO:	Eye window for uplink 28: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
11:02:59:setup_element:INFO:	Eye window for uplink 29: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
11:02:59:setup_element:INFO:	Eye window for uplink 30: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
11:02:59:setup_element:INFO:	Eye window for uplink 31: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
11:02:59:setup_element:INFO:	Setting the clock phase to 30 for group 0, downlink 3
11:02:59:setup_element:INFO:	Scanning data phases
11:02:59:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
11:02:59:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
11:03:04:setup_element:INFO:	Data phase scan results for group 0, downlink 3
11:03:04:setup_element:INFO:	Eye window for uplink 16: ________________XXXXX___________________
Data delay found: 38
11:03:04:setup_element:INFO:	Eye window for uplink 17: ____________XXXX________________________
Data delay found: 33
11:03:04:setup_element:INFO:	Eye window for uplink 18: ___________XXXXXX_______________________
Data delay found: 33
11:03:04:setup_element:INFO:	Eye window for uplink 19: _________XXXXX__________________________
Data delay found: 31
11:03:04:setup_element:INFO:	Eye window for uplink 20: ________XXXXX___________________________
Data delay found: 30
11:03:04:setup_element:INFO:	Eye window for uplink 21: ______XXXXXX____________________________
Data delay found: 28
11:03:04:setup_element:INFO:	Eye window for uplink 22: ___XXXX_________________________________
Data delay found: 24
11:03:04:setup_element:INFO:	Eye window for uplink 23: XXXXX__________________________________X
Data delay found: 21
11:03:04:setup_element:INFO:	Eye window for uplink 24: _________________________________XXXXX__
Data delay found: 15
11:03:04:setup_element:INFO:	Eye window for uplink 25: X____________________________________XXX
Data delay found: 18
11:03:04:setup_element:INFO:	Eye window for uplink 26: _________________________________XXXXX__
Data delay found: 15
11:03:04:setup_element:INFO:	Eye window for uplink 27: XXXX_________________________________XXX
Data delay found: 20
11:03:04:setup_element:INFO:	Eye window for uplink 28: X___________________________________XXXX
Data delay found: 18
11:03:04:setup_element:INFO:	Eye window for uplink 29: XXX__________________________________XXX
Data delay found: 19
11:03:04:setup_element:INFO:	Eye window for uplink 30: XX__________________________________XXXX
Data delay found: 18
11:03:04:setup_element:INFO:	Eye window for uplink 31: X_________________________________XXXXX_
Data delay found: 17
11:03:04:setup_element:INFO:	Setting the data phase to 38 for uplink 16
11:03:04:setup_element:INFO:	Setting the data phase to 33 for uplink 17
11:03:04:setup_element:INFO:	Setting the data phase to 33 for uplink 18
11:03:04:setup_element:INFO:	Setting the data phase to 31 for uplink 19
11:03:04:setup_element:INFO:	Setting the data phase to 30 for uplink 20
11:03:04:setup_element:INFO:	Setting the data phase to 28 for uplink 21
11:03:04:setup_element:INFO:	Setting the data phase to 24 for uplink 22
11:03:04:setup_element:INFO:	Setting the data phase to 21 for uplink 23
11:03:04:setup_element:INFO:	Setting the data phase to 15 for uplink 24
11:03:04:setup_element:INFO:	Setting the data phase to 18 for uplink 25
11:03:04:setup_element:INFO:	Setting the data phase to 15 for uplink 26
11:03:04:setup_element:INFO:	Setting the data phase to 20 for uplink 27
11:03:04:setup_element:INFO:	Setting the data phase to 18 for uplink 28
11:03:04:setup_element:INFO:	Setting the data phase to 19 for uplink 29
11:03:04:setup_element:INFO:	Setting the data phase to 18 for uplink 30
11:03:04:setup_element:INFO:	Setting the data phase to 17 for uplink 31
11:03:04:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 30
    Window Length: 69
    Eye Windows:
      Uplink 16: ____________________________________________________________________XXXXXXXX____
      Uplink 17: ____________________________________________________________________XXXXXXXX____
      Uplink 18: ____________________________________________________________________XXXXXXX_____
      Uplink 19: ____________________________________________________________________XXXXXXX_____
      Uplink 20: ____________________________________________________________________XXXXXX______
      Uplink 21: ____________________________________________________________________XXXXXX______
      Uplink 22: ___________________________________________________________________XXXXXXX______
      Uplink 23: ___________________________________________________________________XXXXXXX______
      Uplink 24: _________________________________________________________________XXXXXXXX_______
      Uplink 25: _________________________________________________________________XXXXXXXX_______
      Uplink 26: __________________________________________________________________XXXXXXXX______
      Uplink 27: __________________________________________________________________XXXXXXXX______
      Uplink 28: __________________________________________________________________XXXXXXXX______
      Uplink 29: __________________________________________________________________XXXXXXXX______
      Uplink 30: ___________________________________________________________________XXXXXXXX_____
      Uplink 31: ___________________________________________________________________XXXXXXXX_____
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 38
      Window Length: 35
      Eye Window: ________________XXXXX___________________
    Uplink 17:
      Optimal Phase: 33
      Window Length: 36
      Eye Window: ____________XXXX________________________
    Uplink 18:
      Optimal Phase: 33
      Window Length: 34
      Eye Window: ___________XXXXXX_______________________
    Uplink 19:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 20:
      Optimal Phase: 30
      Window Length: 35
      Eye Window: ________XXXXX___________________________
    Uplink 21:
      Optimal Phase: 28
      Window Length: 34
      Eye Window: ______XXXXXX____________________________
    Uplink 22:
      Optimal Phase: 24
      Window Length: 36
      Eye Window: ___XXXX_________________________________
    Uplink 23:
      Optimal Phase: 21
      Window Length: 34
      Eye Window: XXXXX__________________________________X
    Uplink 24:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__
    Uplink 25:
      Optimal Phase: 18
      Window Length: 36
      Eye Window: X____________________________________XXX
    Uplink 26:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__
    Uplink 27:
      Optimal Phase: 20
      Window Length: 33
      Eye Window: XXXX_________________________________XXX
    Uplink 28:
      Optimal Phase: 18
      Window Length: 35
      Eye Window: X___________________________________XXXX
    Uplink 29:
      Optimal Phase: 19
      Window Length: 34
      Eye Window: XXX__________________________________XXX
    Uplink 30:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 31:
      Optimal Phase: 17
      Window Length: 33
      Eye Window: X_________________________________XXXXX_
]
11:03:04:setup_element:INFO:	Beginning SMX ASICs map scan
11:03:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
11:03:04:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
11:03:04:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
11:03:04:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
11:03:04:uplink:INFO:	Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
11:03:05:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 0, uplink 17
11:03:05:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 1, uplink 16
11:03:05:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 24
11:03:05:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 25
11:03:05:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 0, uplink 19
11:03:05:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 1, uplink 18
11:03:05:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 26
11:03:05:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 27
11:03:05:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 0, uplink 21
11:03:05:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 1, uplink 20
11:03:05:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 28
11:03:05:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 29
11:03:06:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 0, uplink 23
11:03:06:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 1, uplink 22
11:03:06:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 30
11:03:06:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 31
11:03:07:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x0: (ASIC uplink, uplink): (0, 17), (1, 16)
    ASIC address 0x1: (ASIC uplink, uplink): (0, 24), (1, 25)
    ASIC address 0x2: (ASIC uplink, uplink): (0, 19), (1, 18)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x4: (ASIC uplink, uplink): (0, 21), (1, 20)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x6: (ASIC uplink, uplink): (0, 23), (1, 22)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 30), (1, 31)
  Clock Phase Characteristic:
    Optimal Phase: 30
    Window Length: 69
    Eye Windows:
      Uplink 16: ____________________________________________________________________XXXXXXXX____
      Uplink 17: ____________________________________________________________________XXXXXXXX____
      Uplink 18: ____________________________________________________________________XXXXXXX_____
      Uplink 19: ____________________________________________________________________XXXXXXX_____
      Uplink 20: ____________________________________________________________________XXXXXX______
      Uplink 21: ____________________________________________________________________XXXXXX______
      Uplink 22: ___________________________________________________________________XXXXXXX______
      Uplink 23: ___________________________________________________________________XXXXXXX______
      Uplink 24: _________________________________________________________________XXXXXXXX_______
      Uplink 25: _________________________________________________________________XXXXXXXX_______
      Uplink 26: __________________________________________________________________XXXXXXXX______
      Uplink 27: __________________________________________________________________XXXXXXXX______
      Uplink 28: __________________________________________________________________XXXXXXXX______
      Uplink 29: __________________________________________________________________XXXXXXXX______
      Uplink 30: ___________________________________________________________________XXXXXXXX_____
      Uplink 31: ___________________________________________________________________XXXXXXXX_____
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 38
      Window Length: 35
      Eye Window: ________________XXXXX___________________
    Uplink 17:
      Optimal Phase: 33
      Window Length: 36
      Eye Window: ____________XXXX________________________
    Uplink 18:
      Optimal Phase: 33
      Window Length: 34
      Eye Window: ___________XXXXXX_______________________
    Uplink 19:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 20:
      Optimal Phase: 30
      Window Length: 35
      Eye Window: ________XXXXX___________________________
    Uplink 21:
      Optimal Phase: 28
      Window Length: 34
      Eye Window: ______XXXXXX____________________________
    Uplink 22:
      Optimal Phase: 24
      Window Length: 36
      Eye Window: ___XXXX_________________________________
    Uplink 23:
      Optimal Phase: 21
      Window Length: 34
      Eye Window: XXXXX__________________________________X
    Uplink 24:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__
    Uplink 25:
      Optimal Phase: 18
      Window Length: 36
      Eye Window: X____________________________________XXX
    Uplink 26:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__
    Uplink 27:
      Optimal Phase: 20
      Window Length: 33
      Eye Window: XXXX_________________________________XXX
    Uplink 28:
      Optimal Phase: 18
      Window Length: 35
      Eye Window: X___________________________________XXXX
    Uplink 29:
      Optimal Phase: 19
      Window Length: 34
      Eye Window: XXX__________________________________XXX
    Uplink 30:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 31:
      Optimal Phase: 17
      Window Length: 33
      Eye Window: X_________________________________XXXXX_

11:03:07:setup_element:INFO:	Performing Elink synchronization
11:03:07:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
11:03:07:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
11:03:07:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
11:03:07:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
11:03:07:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 3
11:03:07:uplink:INFO:	Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
11:03:07:ST3_emu:INFO:	Number of chips: 8
11:03:07:ST3_emu:INFO:	Chip address:  	0x0
11:03:07:ST3_emu:INFO:	Chip address:  	0x1
11:03:07:ST3_emu:INFO:	Chip address:  	0x2
11:03:07:ST3_emu:INFO:	Chip address:  	0x3
11:03:07:ST3_emu:INFO:	Chip address:  	0x4
11:03:07:ST3_emu:INFO:	Chip address:  	0x5
11:03:07:ST3_emu:INFO:	Chip address:  	0x6
11:03:07:ST3_emu:INFO:	Chip address:  	0x7
11:03:08:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
11:03:09:febtest:INFO:	0-0 | XA-000-08-002-000-001-139-09 |  47.3 | 1147.8
11:03:09:febtest:INFO:	0-1 | XA-000-08-002-000-001-064-06 |  25.1 | 1212.7
11:03:09:febtest:INFO:	0-2 | XA-000-08-002-000-001-115-15 |  37.7 | 1177.4
11:03:09:febtest:INFO:	0-3 | XA-000-08-002-000-001-049-10 |  47.3 | 1147.8
11:03:09:febtest:INFO:	0-4 | XA-000-08-002-000-001-078-06 |  44.1 | 1165.6
11:03:10:febtest:INFO:	0-5 | XA-000-08-002-000-001-054-10 |  21.9 | 1224.5
11:03:10:febtest:INFO:	0-6 | XA-000-08-002-000-001-065-06 |  44.1 | 1159.7
11:03:10:febtest:INFO:	0-7 | XA-000-08-002-000-001-048-10 |  31.4 | 1201.0
11:03:10:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:03:14:ST3_smx:INFO:	chip: 0-0 	 40.898880 C 	 1153.732915 mV
11:03:14:ST3_smx:INFO:	# loops 0
11:03:16:ST3_smx:INFO:	# loops 1
11:03:17:ST3_smx:INFO:	# loops 2
11:03:19:ST3_smx:INFO:	# loops 3
11:03:21:ST3_smx:INFO:	# loops 4
11:03:23:ST3_smx:INFO:	Total # of broken channels: 1
11:03:23:ST3_smx:INFO:	List of broken channels: [127]
11:03:23:ST3_smx:INFO:	Total # of broken channels: 11
11:03:23:ST3_smx:INFO:	List of broken channels: [3, 5, 7, 9, 11, 13, 15, 17, 19, 23, 127]
11:03:23:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:03:27:ST3_smx:INFO:	chip: 0-1 	 25.062742 C 	 1206.851500 mV
11:03:27:ST3_smx:INFO:	# loops 0
11:03:29:ST3_smx:INFO:	# loops 1
11:03:31:ST3_smx:INFO:	# loops 2
11:03:32:ST3_smx:INFO:	# loops 3
11:03:34:ST3_smx:INFO:	# loops 4
11:03:36:ST3_smx:INFO:	Total # of broken channels: 0
11:03:36:ST3_smx:INFO:	List of broken channels: []
11:03:36:ST3_smx:INFO:	Total # of broken channels: 19
11:03:36:ST3_smx:INFO:	List of broken channels: [3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 41, 45]
11:03:36:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:03:40:ST3_smx:INFO:	chip: 0-2 	 37.726682 C 	 1177.390875 mV
11:03:40:ST3_smx:INFO:	# loops 0
11:03:42:ST3_smx:INFO:	# loops 1
11:03:43:ST3_smx:INFO:	# loops 2
11:03:45:ST3_smx:INFO:	# loops 3
11:03:47:ST3_smx:INFO:	# loops 4
11:03:49:ST3_smx:INFO:	Total # of broken channels: 3
11:03:49:ST3_smx:INFO:	List of broken channels: [5, 9, 13]
11:03:49:ST3_smx:INFO:	Total # of broken channels: 55
11:03:49:ST3_smx:INFO:	List of broken channels: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61, 63, 65, 67, 69, 71, 75, 77, 79, 81, 83, 85, 87, 89, 91, 93, 95, 97, 99, 101, 103, 105, 109, 111, 113]
11:03:49:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:03:53:ST3_smx:INFO:	chip: 0-3 	 47.250730 C 	 1135.937260 mV
11:03:53:ST3_smx:INFO:	# loops 0
11:03:55:ST3_smx:INFO:	# loops 1
11:03:56:ST3_smx:INFO:	# loops 2
11:03:58:ST3_smx:INFO:	# loops 3
11:04:00:ST3_smx:INFO:	# loops 4
11:04:01:ST3_smx:INFO:	Total # of broken channels: 0
11:04:01:ST3_smx:INFO:	List of broken channels: []
11:04:01:ST3_smx:INFO:	Total # of broken channels: 48
11:04:01:ST3_smx:INFO:	List of broken channels: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61, 67, 69, 71, 73, 75, 81, 83, 93, 95, 97, 99, 101, 103, 105, 107, 111, 115]
11:04:02:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:04:06:ST3_smx:INFO:	chip: 0-4 	 44.073563 C 	 1147.806000 mV
11:04:06:ST3_smx:INFO:	# loops 0
11:04:07:ST3_smx:INFO:	# loops 1
11:04:09:ST3_smx:INFO:	# loops 2
11:04:11:ST3_smx:INFO:	# loops 3
11:04:12:ST3_smx:INFO:	# loops 4
11:04:14:ST3_smx:INFO:	Total # of broken channels: 1
11:04:14:ST3_smx:INFO:	List of broken channels: [38]
11:04:14:ST3_smx:INFO:	Total # of broken channels: 51
11:04:14:ST3_smx:INFO:	List of broken channels: [5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 38, 39, 41, 43, 45, 47, 49, 53, 55, 57, 59, 65, 69, 71, 75, 77, 79, 83, 85, 87, 89, 93, 95, 97, 99, 101, 103, 105, 107, 109, 111, 113, 115, 117, 119]
11:04:15:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:04:18:ST3_smx:INFO:	chip: 0-5 	 37.726682 C 	 1165.571835 mV
11:04:18:ST3_smx:INFO:	# loops 0
11:04:20:ST3_smx:INFO:	# loops 1
11:04:22:ST3_smx:INFO:	# loops 2
11:04:24:ST3_smx:INFO:	# loops 3
11:04:25:ST3_smx:INFO:	# loops 4
11:04:27:ST3_smx:INFO:	Total # of broken channels: 0
11:04:27:ST3_smx:INFO:	List of broken channels: []
11:04:27:ST3_smx:INFO:	Total # of broken channels: 0
11:04:27:ST3_smx:INFO:	List of broken channels: []
11:04:28:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:04:31:ST3_smx:INFO:	chip: 0-6 	 53.612520 C 	 1124.048640 mV
11:04:31:ST3_smx:INFO:	# loops 0
11:04:33:ST3_smx:INFO:	# loops 1
11:04:35:ST3_smx:INFO:	# loops 2
11:04:37:ST3_smx:INFO:	# loops 3
11:04:38:ST3_smx:INFO:	# loops 4
11:04:40:ST3_smx:INFO:	Total # of broken channels: 0
11:04:40:ST3_smx:INFO:	List of broken channels: []
11:04:40:ST3_smx:INFO:	Total # of broken channels: 0
11:04:40:ST3_smx:INFO:	List of broken channels: []
11:04:41:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:04:44:ST3_smx:INFO:	chip: 0-7 	 34.556970 C 	 1183.292940 mV
11:04:44:ST3_smx:INFO:	# loops 0
11:04:46:ST3_smx:INFO:	# loops 1
11:04:48:ST3_smx:INFO:	# loops 2
11:04:49:ST3_smx:INFO:	# loops 3
11:04:51:ST3_smx:INFO:	# loops 4
11:04:53:ST3_smx:INFO:	Total # of broken channels: 0
11:04:53:ST3_smx:INFO:	List of broken channels: []
11:04:53:ST3_smx:INFO:	Total # of broken channels: 0
11:04:53:ST3_smx:INFO:	List of broken channels: []
11:04:53:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
11:04:54:febtest:INFO:	0-0 | XA-000-08-002-000-001-139-09 |  44.1 | 1141.9
11:04:54:febtest:INFO:	0-1 | XA-000-08-002-000-001-064-06 |  28.2 | 1195.1
11:04:54:febtest:INFO:	0-2 | XA-000-08-002-000-001-115-15 |  40.9 | 1171.5
11:04:54:febtest:INFO:	0-3 | XA-000-08-002-000-001-049-10 |  50.4 | 1130.0
11:04:54:febtest:INFO:	0-4 | XA-000-08-002-000-001-078-06 |  47.3 | 1141.9
11:04:55:febtest:INFO:	0-5 | XA-000-08-002-000-001-054-10 |  37.7 | 1165.6
11:04:55:febtest:INFO:	0-6 | XA-000-08-002-000-001-065-06 |  56.8 | 1118.1
11:04:55:febtest:INFO:	0-7 | XA-000-08-002-000-001-048-10 |  34.6 | 1183.3
11:04:57:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
11:04:57:ST3_Shared:INFO:	-----------------------FEB-Microcable-----------------------
11:04:57:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
11:04:57:febtest:INFO:	Tsting FEB with SN 1066
11:04:59:smx_tester:INFO:	Scanning setup
11:04:59:elinks:INFO:	Disabling clock on downlink 0
11:04:59:elinks:INFO:	Disabling clock on downlink 1
11:04:59:elinks:INFO:	Disabling clock on downlink 2
11:04:59:elinks:INFO:	Disabling clock on downlink 3
11:04:59:elinks:INFO:	Disabling clock on downlink 4
11:04:59:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:04:59:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
11:04:59:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:04:59:elinks:INFO:	Disabling clock on downlink 0
11:04:59:elinks:INFO:	Disabling clock on downlink 1
11:04:59:elinks:INFO:	Disabling clock on downlink 2
11:04:59:elinks:INFO:	Disabling clock on downlink 3
11:04:59:elinks:INFO:	Disabling clock on downlink 4
11:04:59:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:04:59:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
11:04:59:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:04:59:elinks:INFO:	Disabling clock on downlink 0
11:04:59:elinks:INFO:	Disabling clock on downlink 1
11:04:59:elinks:INFO:	Disabling clock on downlink 2
11:04:59:elinks:INFO:	Disabling clock on downlink 3
11:04:59:elinks:INFO:	Disabling clock on downlink 4
11:04:59:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:04:59:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
11:04:59:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:04:59:elinks:INFO:	Disabling clock on downlink 0
11:04:59:elinks:INFO:	Disabling clock on downlink 1
11:04:59:elinks:INFO:	Disabling clock on downlink 2
11:04:59:elinks:INFO:	Disabling clock on downlink 3
11:04:59:elinks:INFO:	Disabling clock on downlink 4
11:04:59:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:04:59:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 16
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 17
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 18
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 19
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 20
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 21
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 22
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 23
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 24
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 25
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 26
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 27
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 28
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 29
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 30
11:04:59:setup_element:INFO:	SOS detected for group 0, downlink 3, uplink 31
11:04:59:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:04:59:elinks:INFO:	Disabling clock on downlink 0
11:04:59:elinks:INFO:	Disabling clock on downlink 1
11:04:59:elinks:INFO:	Disabling clock on downlink 2
11:04:59:elinks:INFO:	Disabling clock on downlink 3
11:04:59:elinks:INFO:	Disabling clock on downlink 4
11:04:59:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:04:59:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
11:04:59:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:04:59:setup_element:INFO:	Scanning clock phase
11:04:59:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
11:05:00:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
11:05:00:setup_element:INFO:	Clock phase scan results for group 0, downlink 3
11:05:00:setup_element:INFO:	Eye window for uplink 16: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
11:05:00:setup_element:INFO:	Eye window for uplink 17: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
11:05:00:setup_element:INFO:	Eye window for uplink 18: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
11:05:00:setup_element:INFO:	Eye window for uplink 19: ___________________________________________________________________XXXXXXXX_____
Clock Delay: 30
11:05:00:setup_element:INFO:	Eye window for uplink 20: ____________________________________________________________________XXXXXX______
Clock Delay: 30
11:05:00:setup_element:INFO:	Eye window for uplink 21: ____________________________________________________________________XXXXXX______
Clock Delay: 30
11:05:00:setup_element:INFO:	Eye window for uplink 22: ___________________________________________________________________XXXXXX_______
Clock Delay: 29
11:05:00:setup_element:INFO:	Eye window for uplink 23: ___________________________________________________________________XXXXXX_______
Clock Delay: 29
11:05:00:setup_element:INFO:	Eye window for uplink 24: _________________________________________________________________XXXXXXX________
Clock Delay: 28
11:05:00:setup_element:INFO:	Eye window for uplink 25: _________________________________________________________________XXXXXXX________
Clock Delay: 28
11:05:00:setup_element:INFO:	Eye window for uplink 26: _________________________________________________________________XXXXXXXXX______
Clock Delay: 29
11:05:00:setup_element:INFO:	Eye window for uplink 27: _________________________________________________________________XXXXXXXXX______
Clock Delay: 29
11:05:00:setup_element:INFO:	Eye window for uplink 28: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
11:05:00:setup_element:INFO:	Eye window for uplink 29: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
11:05:00:setup_element:INFO:	Eye window for uplink 30: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
11:05:00:setup_element:INFO:	Eye window for uplink 31: ___________________________________________________________________XXXXXXX______
Clock Delay: 30
11:05:00:setup_element:INFO:	Setting the clock phase to 30 for group 0, downlink 3
11:05:00:setup_element:INFO:	Scanning data phases
11:05:00:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
11:05:00:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
11:05:05:setup_element:INFO:	Data phase scan results for group 0, downlink 3
11:05:05:setup_element:INFO:	Eye window for uplink 16: _______________XXXXX____________________
Data delay found: 37
11:05:05:setup_element:INFO:	Eye window for uplink 17: ___________XXXXX________________________
Data delay found: 33
11:05:05:setup_element:INFO:	Eye window for uplink 18: ___________XXXXX________________________
Data delay found: 33
11:05:05:setup_element:INFO:	Eye window for uplink 19: ________XXXXX___________________________
Data delay found: 30
11:05:05:setup_element:INFO:	Eye window for uplink 20: ________XXXX____________________________
Data delay found: 29
11:05:05:setup_element:INFO:	Eye window for uplink 21: ______XXXXX_____________________________
Data delay found: 28
11:05:05:setup_element:INFO:	Eye window for uplink 22: __XXXXX_________________________________
Data delay found: 24
11:05:05:setup_element:INFO:	Eye window for uplink 23: XXXX__________________________________XX
Data delay found: 20
11:05:05:setup_element:INFO:	Eye window for uplink 24: ________________________________XXXXX___
Data delay found: 14
11:05:06:setup_element:INFO:	Eye window for uplink 25: X__________________________________XXXXX
Data delay found: 17
11:05:06:setup_element:INFO:	Eye window for uplink 26: ________________________________XXXXX___
Data delay found: 14
11:05:06:setup_element:INFO:	Eye window for uplink 27: XX___________________________________XXX
Data delay found: 19
11:05:06:setup_element:INFO:	Eye window for uplink 28: __________________________________XXXXXX
Data delay found: 16
11:05:06:setup_element:INFO:	Eye window for uplink 29: XXX__________________________________XXX
Data delay found: 19
11:05:06:setup_element:INFO:	Eye window for uplink 30: X_________________________________XXXXXX
Data delay found: 17
11:05:06:setup_element:INFO:	Eye window for uplink 31: _________________________________XXXXX__
Data delay found: 15
11:05:06:setup_element:INFO:	Setting the data phase to 37 for uplink 16
11:05:06:setup_element:INFO:	Setting the data phase to 33 for uplink 17
11:05:06:setup_element:INFO:	Setting the data phase to 33 for uplink 18
11:05:06:setup_element:INFO:	Setting the data phase to 30 for uplink 19
11:05:06:setup_element:INFO:	Setting the data phase to 29 for uplink 20
11:05:06:setup_element:INFO:	Setting the data phase to 28 for uplink 21
11:05:06:setup_element:INFO:	Setting the data phase to 24 for uplink 22
11:05:06:setup_element:INFO:	Setting the data phase to 20 for uplink 23
11:05:06:setup_element:INFO:	Setting the data phase to 14 for uplink 24
11:05:06:setup_element:INFO:	Setting the data phase to 17 for uplink 25
11:05:06:setup_element:INFO:	Setting the data phase to 14 for uplink 26
11:05:06:setup_element:INFO:	Setting the data phase to 19 for uplink 27
11:05:06:setup_element:INFO:	Setting the data phase to 16 for uplink 28
11:05:06:setup_element:INFO:	Setting the data phase to 19 for uplink 29
11:05:06:setup_element:INFO:	Setting the data phase to 17 for uplink 30
11:05:06:setup_element:INFO:	Setting the data phase to 15 for uplink 31
11:05:06:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 30
    Window Length: 69
    Eye Windows:
      Uplink 16: _____________________________________________________________________XXXXXXX____
      Uplink 17: _____________________________________________________________________XXXXXXX____
      Uplink 18: ___________________________________________________________________XXXXXXXX_____
      Uplink 19: ___________________________________________________________________XXXXXXXX_____
      Uplink 20: ____________________________________________________________________XXXXXX______
      Uplink 21: ____________________________________________________________________XXXXXX______
      Uplink 22: ___________________________________________________________________XXXXXX_______
      Uplink 23: ___________________________________________________________________XXXXXX_______
      Uplink 24: _________________________________________________________________XXXXXXX________
      Uplink 25: _________________________________________________________________XXXXXXX________
      Uplink 26: _________________________________________________________________XXXXXXXXX______
      Uplink 27: _________________________________________________________________XXXXXXXXX______
      Uplink 28: __________________________________________________________________XXXXXXXX______
      Uplink 29: __________________________________________________________________XXXXXXXX______
      Uplink 30: ___________________________________________________________________XXXXXXX______
      Uplink 31: ___________________________________________________________________XXXXXXX______
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 37
      Window Length: 35
      Eye Window: _______________XXXXX____________________
    Uplink 17:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 18:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 19:
      Optimal Phase: 30
      Window Length: 35
      Eye Window: ________XXXXX___________________________
    Uplink 20:
      Optimal Phase: 29
      Window Length: 36
      Eye Window: ________XXXX____________________________
    Uplink 21:
      Optimal Phase: 28
      Window Length: 35
      Eye Window: ______XXXXX_____________________________
    Uplink 22:
      Optimal Phase: 24
      Window Length: 35
      Eye Window: __XXXXX_________________________________
    Uplink 23:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 24:
      Optimal Phase: 14
      Window Length: 35
      Eye Window: ________________________________XXXXX___
    Uplink 25:
      Optimal Phase: 17
      Window Length: 34
      Eye Window: X__________________________________XXXXX
    Uplink 26:
      Optimal Phase: 14
      Window Length: 35
      Eye Window: ________________________________XXXXX___
    Uplink 27:
      Optimal Phase: 19
      Window Length: 35
      Eye Window: XX___________________________________XXX
    Uplink 28:
      Optimal Phase: 16
      Window Length: 34
      Eye Window: __________________________________XXXXXX
    Uplink 29:
      Optimal Phase: 19
      Window Length: 34
      Eye Window: XXX__________________________________XXX
    Uplink 30:
      Optimal Phase: 17
      Window Length: 33
      Eye Window: X_________________________________XXXXXX
    Uplink 31:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__
]
11:05:06:setup_element:INFO:	Beginning SMX ASICs map scan
11:05:06:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
11:05:06:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
11:05:06:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
11:05:06:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
11:05:06:uplink:INFO:	Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
11:05:06:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 0, uplink 17
11:05:06:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 1, uplink 16
11:05:06:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 24
11:05:06:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 25
11:05:06:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 0, uplink 19
11:05:06:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 1, uplink 18
11:05:06:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 26
11:05:06:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 27
11:05:06:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 0, uplink 21
11:05:06:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 1, uplink 20
11:05:07:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 28
11:05:07:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 29
11:05:07:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 0, uplink 23
11:05:07:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 1, uplink 22
11:05:07:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 30
11:05:07:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 31
11:05:08:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 3
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x0: (ASIC uplink, uplink): (0, 17), (1, 16)
    ASIC address 0x1: (ASIC uplink, uplink): (0, 24), (1, 25)
    ASIC address 0x2: (ASIC uplink, uplink): (0, 19), (1, 18)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x4: (ASIC uplink, uplink): (0, 21), (1, 20)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x6: (ASIC uplink, uplink): (0, 23), (1, 22)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 30), (1, 31)
  Clock Phase Characteristic:
    Optimal Phase: 30
    Window Length: 69
    Eye Windows:
      Uplink 16: _____________________________________________________________________XXXXXXX____
      Uplink 17: _____________________________________________________________________XXXXXXX____
      Uplink 18: ___________________________________________________________________XXXXXXXX_____
      Uplink 19: ___________________________________________________________________XXXXXXXX_____
      Uplink 20: ____________________________________________________________________XXXXXX______
      Uplink 21: ____________________________________________________________________XXXXXX______
      Uplink 22: ___________________________________________________________________XXXXXX_______
      Uplink 23: ___________________________________________________________________XXXXXX_______
      Uplink 24: _________________________________________________________________XXXXXXX________
      Uplink 25: _________________________________________________________________XXXXXXX________
      Uplink 26: _________________________________________________________________XXXXXXXXX______
      Uplink 27: _________________________________________________________________XXXXXXXXX______
      Uplink 28: __________________________________________________________________XXXXXXXX______
      Uplink 29: __________________________________________________________________XXXXXXXX______
      Uplink 30: ___________________________________________________________________XXXXXXX______
      Uplink 31: ___________________________________________________________________XXXXXXX______
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 37
      Window Length: 35
      Eye Window: _______________XXXXX____________________
    Uplink 17:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 18:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 19:
      Optimal Phase: 30
      Window Length: 35
      Eye Window: ________XXXXX___________________________
    Uplink 20:
      Optimal Phase: 29
      Window Length: 36
      Eye Window: ________XXXX____________________________
    Uplink 21:
      Optimal Phase: 28
      Window Length: 35
      Eye Window: ______XXXXX_____________________________
    Uplink 22:
      Optimal Phase: 24
      Window Length: 35
      Eye Window: __XXXXX_________________________________
    Uplink 23:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 24:
      Optimal Phase: 14
      Window Length: 35
      Eye Window: ________________________________XXXXX___
    Uplink 25:
      Optimal Phase: 17
      Window Length: 34
      Eye Window: X__________________________________XXXXX
    Uplink 26:
      Optimal Phase: 14
      Window Length: 35
      Eye Window: ________________________________XXXXX___
    Uplink 27:
      Optimal Phase: 19
      Window Length: 35
      Eye Window: XX___________________________________XXX
    Uplink 28:
      Optimal Phase: 16
      Window Length: 34
      Eye Window: __________________________________XXXXXX
    Uplink 29:
      Optimal Phase: 19
      Window Length: 34
      Eye Window: XXX__________________________________XXX
    Uplink 30:
      Optimal Phase: 17
      Window Length: 33
      Eye Window: X_________________________________XXXXXX
    Uplink 31:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__

11:05:08:setup_element:INFO:	Performing Elink synchronization
11:05:08:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
11:05:08:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [3]
11:05:08:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [3]
11:05:08:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [3]
11:05:08:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 3
11:05:08:uplink:INFO:	Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
11:05:08:ST3_emu:INFO:	Number of chips: 8
11:05:08:ST3_emu:INFO:	Chip address:  	0x0
11:05:08:ST3_emu:INFO:	Chip address:  	0x1
11:05:08:ST3_emu:INFO:	Chip address:  	0x2
11:05:08:ST3_emu:INFO:	Chip address:  	0x3
11:05:08:ST3_emu:INFO:	Chip address:  	0x4
11:05:08:ST3_emu:INFO:	Chip address:  	0x5
11:05:09:ST3_emu:INFO:	Chip address:  	0x6
11:05:09:ST3_emu:INFO:	Chip address:  	0x7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_0
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_2
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_4
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_6
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_7
11:05:09:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
11:05:09:febtest:INFO:	0-0 | XA-000-08-002-000-001-139-09 |  50.4 | 1147.8
11:05:10:febtest:INFO:	0-1 | XA-000-08-002-000-001-064-06 |  28.2 | 1212.7
11:05:10:febtest:INFO:	0-2 | XA-000-08-002-000-001-115-15 |  47.3 | 1171.5
11:05:10:febtest:INFO:	0-3 | XA-000-08-002-000-001-049-10 |  50.4 | 1147.8
11:05:10:febtest:INFO:	0-4 | XA-000-08-002-000-001-078-06 |  47.3 | 1159.7
11:05:11:febtest:INFO:	0-5 | XA-000-08-002-000-001-054-10 |  31.4 | 1212.7
11:05:11:febtest:INFO:	0-6 | XA-000-08-002-000-001-065-06 |  50.4 | 1153.7
11:05:11:febtest:INFO:	0-7 | XA-000-08-002-000-001-048-10 |  34.6 | 1201.0
11:05:11:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:05:15:ST3_smx:INFO:	chip: 0-0 	 47.250730 C 	 1147.806000 mV
11:05:15:ST3_smx:INFO:	# loops 0
11:05:16:ST3_smx:INFO:	# loops 1
11:05:18:ST3_smx:INFO:	# loops 2
11:05:20:ST3_smx:INFO:	# loops 3
11:05:21:ST3_smx:INFO:	# loops 4
11:05:23:ST3_smx:INFO:	Total # of broken channels: 0
11:05:23:ST3_smx:INFO:	List of broken channels: []
11:05:23:ST3_smx:INFO:	Total # of broken channels: 0
11:05:23:ST3_smx:INFO:	List of broken channels: []
11:05:24:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:05:28:ST3_smx:INFO:	chip: 0-1 	 25.062742 C 	 1200.969315 mV
11:05:28:ST3_smx:INFO:	# loops 0
11:05:29:ST3_smx:INFO:	# loops 1
11:05:31:ST3_smx:INFO:	# loops 2
11:05:33:ST3_smx:INFO:	# loops 3
11:05:34:ST3_smx:INFO:	# loops 4
11:05:36:ST3_smx:INFO:	Total # of broken channels: 0
11:05:36:ST3_smx:INFO:	List of broken channels: []
11:05:36:ST3_smx:INFO:	Total # of broken channels: 0
11:05:36:ST3_smx:INFO:	List of broken channels: []
11:05:37:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:05:40:ST3_smx:INFO:	chip: 0-2 	 37.726682 C 	 1177.390875 mV
11:05:40:ST3_smx:INFO:	# loops 0
11:05:42:ST3_smx:INFO:	# loops 1
11:05:44:ST3_smx:INFO:	# loops 2
11:05:46:ST3_smx:INFO:	# loops 3
11:05:47:ST3_smx:INFO:	# loops 4
11:05:49:ST3_smx:INFO:	Total # of broken channels: 0
11:05:49:ST3_smx:INFO:	List of broken channels: []
11:05:49:ST3_smx:INFO:	Total # of broken channels: 0
11:05:49:ST3_smx:INFO:	List of broken channels: []
11:05:50:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:05:53:ST3_smx:INFO:	chip: 0-3 	 50.430383 C 	 1135.937260 mV
11:05:53:ST3_smx:INFO:	# loops 0
11:05:55:ST3_smx:INFO:	# loops 1
11:05:57:ST3_smx:INFO:	# loops 2
11:05:58:ST3_smx:INFO:	# loops 3
11:06:00:ST3_smx:INFO:	# loops 4
11:06:02:ST3_smx:INFO:	Total # of broken channels: 0
11:06:02:ST3_smx:INFO:	List of broken channels: []
11:06:02:ST3_smx:INFO:	Total # of broken channels: 0
11:06:02:ST3_smx:INFO:	List of broken channels: []
11:06:02:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:06:06:ST3_smx:INFO:	chip: 0-4 	 47.250730 C 	 1147.806000 mV
11:06:06:ST3_smx:INFO:	# loops 0
11:06:08:ST3_smx:INFO:	# loops 1
11:06:09:ST3_smx:INFO:	# loops 2
11:06:11:ST3_smx:INFO:	# loops 3
11:06:13:ST3_smx:INFO:	# loops 4
11:06:14:ST3_smx:INFO:	Total # of broken channels: 0
11:06:14:ST3_smx:INFO:	List of broken channels: []
11:06:14:ST3_smx:INFO:	Total # of broken channels: 1
11:06:14:ST3_smx:INFO:	List of broken channels: [38]
11:06:15:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:06:19:ST3_smx:INFO:	chip: 0-5 	 37.726682 C 	 1171.483840 mV
11:06:19:ST3_smx:INFO:	# loops 0
11:06:20:ST3_smx:INFO:	# loops 1
11:06:22:ST3_smx:INFO:	# loops 2
11:06:24:ST3_smx:INFO:	# loops 3
11:06:25:ST3_smx:INFO:	# loops 4
11:06:27:ST3_smx:INFO:	Total # of broken channels: 0
11:06:27:ST3_smx:INFO:	List of broken channels: []
11:06:27:ST3_smx:INFO:	Total # of broken channels: 0
11:06:27:ST3_smx:INFO:	List of broken channels: []
11:06:28:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:06:32:ST3_smx:INFO:	chip: 0-6 	 56.797143 C 	 1118.096875 mV
11:06:32:ST3_smx:INFO:	# loops 0
11:06:33:ST3_smx:INFO:	# loops 1
11:06:35:ST3_smx:INFO:	# loops 2
11:06:37:ST3_smx:INFO:	# loops 3
11:06:38:ST3_smx:INFO:	# loops 4
11:06:40:ST3_smx:INFO:	Total # of broken channels: 0
11:06:40:ST3_smx:INFO:	List of broken channels: []
11:06:40:ST3_smx:INFO:	Total # of broken channels: 0
11:06:40:ST3_smx:INFO:	List of broken channels: []
11:06:40:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:06:44:ST3_smx:INFO:	chip: 0-7 	 37.726682 C 	 1183.292940 mV
11:06:44:ST3_smx:INFO:	# loops 0
11:06:46:ST3_smx:INFO:	# loops 1
11:06:48:ST3_smx:INFO:	# loops 2
11:06:49:ST3_smx:INFO:	# loops 3
11:06:51:ST3_smx:INFO:	# loops 4
11:06:53:ST3_smx:INFO:	Total # of broken channels: 0
11:06:53:ST3_smx:INFO:	List of broken channels: []
11:06:53:ST3_smx:INFO:	Total # of broken channels: 0
11:06:53:ST3_smx:INFO:	List of broken channels: []
11:06:53:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
11:06:53:febtest:INFO:	0-0 | XA-000-08-002-000-001-139-09 |  47.3 | 1141.9
11:06:54:febtest:INFO:	0-1 | XA-000-08-002-000-001-064-06 |  28.2 | 1195.1
11:06:54:febtest:INFO:	0-2 | XA-000-08-002-000-001-115-15 |  40.9 | 1171.5
11:06:54:febtest:INFO:	0-3 | XA-000-08-002-000-001-049-10 |  50.4 | 1130.0
11:06:54:febtest:INFO:	0-4 | XA-000-08-002-000-001-078-06 |  50.4 | 1141.9
11:06:55:febtest:INFO:	0-5 | XA-000-08-002-000-001-054-10 |  40.9 | 1165.6
11:06:55:febtest:INFO:	0-6 | XA-000-08-002-000-001-065-06 |  56.8 | 1118.1
11:06:55:febtest:INFO:	0-7 | XA-000-08-002-000-001-048-10 |  37.7 | 1177.4
11:07:06:ST3_Shared:INFO:	/home/cbm/public_html/Production_LogDir//FEB/FEB_1066/TestDate_2023_10_31-11_04_57/