Go Back
FEB_1080 12.01.24 09:05:21
TextEdit.txt
09:03:47:febtest:INFO: FEB 8-2 selected
09:03:47:smx_tester:INFO: Setting Elink clock mode to 160 MHz
09:03:50:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
09:03:50:ST3_Shared:INFO: -------------------------FEB-Sensor-------------------------
09:03:50:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
09:04:12:ST3_ModuleSelector:INFO: L6DL200120 M6DL2B2001202B2 124 A
09:04:12:ST3_ModuleSelector:INFO: 09234
09:04:13:febtest:INFO: Testing FEB with SN 1080
09:04:14:smx_tester:INFO: Scanning setup
09:04:14:elinks:INFO: Disabling clock on downlink 0
09:04:14:elinks:INFO: Disabling clock on downlink 1
09:04:14:elinks:INFO: Disabling clock on downlink 2
09:04:14:elinks:INFO: Disabling clock on downlink 3
09:04:14:elinks:INFO: Disabling clock on downlink 4
09:04:14:setup_element:INFO: Checking SOS, encoding_mode: SOS
09:04:14:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
09:04:14:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
09:04:14:elinks:INFO: Disabling clock on downlink 0
09:04:14:elinks:INFO: Disabling clock on downlink 1
09:04:14:elinks:INFO: Disabling clock on downlink 2
09:04:14:elinks:INFO: Disabling clock on downlink 3
09:04:14:elinks:INFO: Disabling clock on downlink 4
09:04:14:setup_element:INFO: Checking SOS, encoding_mode: SOS
09:04:14:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
09:04:14:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
09:04:14:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
09:04:14:elinks:INFO: Disabling clock on downlink 0
09:04:14:elinks:INFO: Disabling clock on downlink 1
09:04:14:elinks:INFO: Disabling clock on downlink 2
09:04:14:elinks:INFO: Disabling clock on downlink 3
09:04:14:elinks:INFO: Disabling clock on downlink 4
09:04:14:setup_element:INFO: Checking SOS, encoding_mode: SOS
09:04:14:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
09:04:15:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
09:04:15:elinks:INFO: Disabling clock on downlink 0
09:04:15:elinks:INFO: Disabling clock on downlink 1
09:04:15:elinks:INFO: Disabling clock on downlink 2
09:04:15:elinks:INFO: Disabling clock on downlink 3
09:04:15:elinks:INFO: Disabling clock on downlink 4
09:04:15:setup_element:INFO: Checking SOS, encoding_mode: SOS
09:04:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
09:04:15:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
09:04:15:elinks:INFO: Disabling clock on downlink 0
09:04:15:elinks:INFO: Disabling clock on downlink 1
09:04:15:elinks:INFO: Disabling clock on downlink 2
09:04:15:elinks:INFO: Disabling clock on downlink 3
09:04:15:elinks:INFO: Disabling clock on downlink 4
09:04:15:setup_element:INFO: Checking SOS, encoding_mode: SOS
09:04:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
09:04:15:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
09:04:15:setup_element:INFO: Scanning clock phase
09:04:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
09:04:15:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:04:15:setup_element:INFO: Clock phase scan results for group 0, downlink 1
09:04:15:setup_element:INFO: Eye window for uplink 0 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
09:04:15:setup_element:INFO: Eye window for uplink 1 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
09:04:15:setup_element:INFO: Eye window for uplink 2 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
09:04:15:setup_element:INFO: Eye window for uplink 3 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
09:04:15:setup_element:INFO: Eye window for uplink 4 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
09:04:15:setup_element:INFO: Eye window for uplink 5 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
09:04:15:setup_element:INFO: Eye window for uplink 6 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
09:04:15:setup_element:INFO: Eye window for uplink 7 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
09:04:15:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
09:04:15:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
09:04:15:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
09:04:15:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
09:04:15:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
09:04:15:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
09:04:15:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
09:04:15:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
09:04:15:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
09:04:15:setup_element:INFO: Scanning data phases
09:04:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
09:04:15:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:04:21:setup_element:INFO: Data phase scan results for group 0, downlink 1
09:04:21:setup_element:INFO: Eye window for uplink 0 : ____________XXXX________________________
Data delay found: 33
09:04:21:setup_element:INFO: Eye window for uplink 1 : _______XXXXX____________________________
Data delay found: 29
09:04:21:setup_element:INFO: Eye window for uplink 2 : _______XXXX_____________________________
Data delay found: 28
09:04:21:setup_element:INFO: Eye window for uplink 3 : ____XXXXX_______________________________
Data delay found: 26
09:04:21:setup_element:INFO: Eye window for uplink 4 : ____XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 1
09:04:21:setup_element:WARNING: Group 0, downlink 1, uplink 5: No True values in scanned data!
Traceback (most recent call last):
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/setup_element.py", line 261, in characterize_data_phases
data_delay, window_len = find_center(fcl)
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/hctsp.py", line 87, in find_center
raise Exception("No True values in scanned data!")
Exception: No True values in scanned data!
09:04:21:setup_element:INFO: Eye window for uplink 6 : XXX___________________________________XX
Data delay found: 20
09:04:21:setup_element:INFO: Eye window for uplink 7 : X________________________________XXXXXX_
Data delay found: 16
09:04:21:setup_element:INFO: Eye window for uplink 8 : _________________________XXXX___________
Data delay found: 6
09:04:21:setup_element:INFO: Eye window for uplink 9 : ______________________________XXXXX_____
Data delay found: 12
09:04:21:setup_element:INFO: Eye window for uplink 10: __________________________XXXXX_________
Data delay found: 8
09:04:21:setup_element:INFO: Eye window for uplink 11: ______________________________XXXX______
Data delay found: 11
09:04:21:setup_element:INFO: Eye window for uplink 12: ____________________________XXXX________
Data delay found: 9
09:04:21:setup_element:INFO: Eye window for uplink 13: _______________________________XXXX_____
Data delay found: 12
09:04:21:setup_element:INFO: Eye window for uplink 14: ___________________________XXXXX________
Data delay found: 9
09:04:21:setup_element:INFO: Eye window for uplink 15: _____________________________XXXXX______
Data delay found: 11
09:04:21:setup_element:INFO: Setting the data phase to 33 for uplink 0
09:04:21:setup_element:INFO: Setting the data phase to 29 for uplink 1
09:04:21:setup_element:INFO: Setting the data phase to 28 for uplink 2
09:04:21:setup_element:INFO: Setting the data phase to 26 for uplink 3
09:04:21:setup_element:INFO: Setting the data phase to 1 for uplink 4
09:04:21:setup_element:INFO: Setting the data phase to 20 for uplink 6
09:04:21:setup_element:INFO: Setting the data phase to 16 for uplink 7
09:04:21:setup_element:INFO: Setting the data phase to 6 for uplink 8
09:04:21:setup_element:INFO: Setting the data phase to 12 for uplink 9
09:04:21:setup_element:INFO: Setting the data phase to 8 for uplink 10
09:04:21:setup_element:INFO: Setting the data phase to 11 for uplink 11
09:04:21:setup_element:INFO: Setting the data phase to 9 for uplink 12
09:04:21:setup_element:INFO: Setting the data phase to 12 for uplink 13
09:04:21:setup_element:INFO: Setting the data phase to 9 for uplink 14
09:04:21:setup_element:INFO: Setting the data phase to 11 for uplink 15
09:04:21:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: _______________________________________________________________________XXXXXX___
Uplink 3: _______________________________________________________________________XXXXXX___
Uplink 4: ______________________________________________________________________XXXXXXX___
Uplink 5: ______________________________________________________________________XXXXXXX___
Uplink 6: _______________________________________________________________________XXXXXX___
Uplink 7: _______________________________________________________________________XXXXXX___
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 36
Eye Window: ____________XXXX________________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 1
Window Length: 4
Eye Window: ____XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 16
Window Length: 32
Eye Window: X________________________________XXXXXX_
Uplink 8:
Optimal Phase: 6
Window Length: 36
Eye Window: _________________________XXXX___________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
Uplink 14:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 15:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
]
09:04:21:setup_element:INFO: Beginning SMX ASICs map scan
09:04:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
09:04:21:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:04:21:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
09:04:21:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
09:04:21:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
09:04:21:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
09:04:21:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
09:04:21:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
09:04:21:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
09:04:22:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
09:04:22:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
09:04:22:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
09:04:22:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
09:04:22:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
09:04:22:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
09:04:22:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
09:04:22:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
09:04:22:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
09:04:22:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
09:04:22:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
09:04:23:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
09:04:24:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: _______________________________________________________________________XXXXXX___
Uplink 3: _______________________________________________________________________XXXXXX___
Uplink 4: ______________________________________________________________________XXXXXXX___
Uplink 5: ______________________________________________________________________XXXXXXX___
Uplink 6: _______________________________________________________________________XXXXXX___
Uplink 7: _______________________________________________________________________XXXXXX___
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 36
Eye Window: ____________XXXX________________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 1
Window Length: 4
Eye Window: ____XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 16
Window Length: 32
Eye Window: X________________________________XXXXXX_
Uplink 8:
Optimal Phase: 6
Window Length: 36
Eye Window: _________________________XXXX___________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
Uplink 14:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 15:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
09:04:24:setup_element:INFO: Performing Elink synchronization
09:04:24:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
09:04:24:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:04:24:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
09:04:24:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
09:04:24:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
09:04:24:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
Traceback (most recent call last):
File "febtest.py", line 321, in DoFEB_SensorTest
if self.DoScanFEB8(reporter.out_dict):
File "febtest.py", line 178, in DoScanFEB8
if self.EMU.Scan_FEB8(reporter):
File "/home/cbm/ST3_v2.29.07/lib/ST3_emu_feb.py", line 52, in Scan_FEB8
if super().init_chips():
File "/home/cbm/ST3_v2.29.07/lib/ST3_emu.py", line 106, in init_chips
se.write_smx_elink_masks()
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/setup_element.py", line 412, in write_smx_elink_masks
ack_monitor.check_write()
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/ack_monitor.py", line 63, in check_write
return self._check(self._check_write, timeout)
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/ack_monitor.py", line 60, in _check
raise AckNotReceived
hctsp.ack_monitor.AckNotReceived: Ack frame not received
09:05:21:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
09:05:21:ST3_Shared:INFO: -------------------------FEB-Sensor-------------------------
09:05:21:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
09:05:23:ST3_ModuleSelector:INFO: L6DL200120 M6DL2B2001202B2 124 A
09:05:23:ST3_ModuleSelector:INFO: 09234
09:05:23:febtest:INFO: Testing FEB with SN 1080
09:05:25:smx_tester:INFO: Scanning setup
09:05:25:elinks:INFO: Disabling clock on downlink 0
09:05:25:elinks:INFO: Disabling clock on downlink 1
09:05:25:elinks:INFO: Disabling clock on downlink 2
09:05:25:elinks:INFO: Disabling clock on downlink 3
09:05:25:elinks:INFO: Disabling clock on downlink 4
09:05:25:setup_element:INFO: Checking SOS, encoding_mode: SOS
09:05:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
09:05:25:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
09:05:25:elinks:INFO: Disabling clock on downlink 0
09:05:25:elinks:INFO: Disabling clock on downlink 1
09:05:25:elinks:INFO: Disabling clock on downlink 2
09:05:25:elinks:INFO: Disabling clock on downlink 3
09:05:25:elinks:INFO: Disabling clock on downlink 4
09:05:25:setup_element:INFO: Checking SOS, encoding_mode: SOS
09:05:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
09:05:25:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
09:05:25:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
09:05:25:elinks:INFO: Disabling clock on downlink 0
09:05:25:elinks:INFO: Disabling clock on downlink 1
09:05:25:elinks:INFO: Disabling clock on downlink 2
09:05:25:elinks:INFO: Disabling clock on downlink 3
09:05:25:elinks:INFO: Disabling clock on downlink 4
09:05:25:setup_element:INFO: Checking SOS, encoding_mode: SOS
09:05:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
09:05:25:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
09:05:25:elinks:INFO: Disabling clock on downlink 0
09:05:25:elinks:INFO: Disabling clock on downlink 1
09:05:25:elinks:INFO: Disabling clock on downlink 2
09:05:25:elinks:INFO: Disabling clock on downlink 3
09:05:25:elinks:INFO: Disabling clock on downlink 4
09:05:25:setup_element:INFO: Checking SOS, encoding_mode: SOS
09:05:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
09:05:25:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
09:05:25:elinks:INFO: Disabling clock on downlink 0
09:05:25:elinks:INFO: Disabling clock on downlink 1
09:05:25:elinks:INFO: Disabling clock on downlink 2
09:05:25:elinks:INFO: Disabling clock on downlink 3
09:05:25:elinks:INFO: Disabling clock on downlink 4
09:05:25:setup_element:INFO: Checking SOS, encoding_mode: SOS
09:05:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
09:05:25:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
09:05:25:setup_element:INFO: Scanning clock phase
09:05:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
09:05:26:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:05:26:setup_element:INFO: Clock phase scan results for group 0, downlink 1
09:05:26:setup_element:INFO: Eye window for uplink 0 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
09:05:26:setup_element:INFO: Eye window for uplink 1 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
09:05:26:setup_element:INFO: Eye window for uplink 2 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
09:05:26:setup_element:INFO: Eye window for uplink 3 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
09:05:26:setup_element:INFO: Eye window for uplink 4 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
09:05:26:setup_element:INFO: Eye window for uplink 5 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
09:05:26:setup_element:INFO: Eye window for uplink 6 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
09:05:26:setup_element:INFO: Eye window for uplink 7 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
09:05:26:setup_element:INFO: Eye window for uplink 8 : ________________________________________________________________________________
Clock Delay: 40
09:05:26:setup_element:INFO: Eye window for uplink 9 : ________________________________________________________________________________
Clock Delay: 40
09:05:26:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
09:05:26:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
09:05:26:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
09:05:26:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
09:05:26:setup_element:INFO: Eye window for uplink 14: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
09:05:26:setup_element:INFO: Eye window for uplink 15: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
09:05:26:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
09:05:26:setup_element:INFO: Scanning data phases
09:05:26:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
09:05:26:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:05:32:setup_element:INFO: Data phase scan results for group 0, downlink 1
09:05:32:setup_element:INFO: Eye window for uplink 0 : ___________XXXXX________________________
Data delay found: 33
09:05:32:setup_element:INFO: Eye window for uplink 1 : _______XXXX_____________________________
Data delay found: 28
09:05:32:setup_element:INFO: Eye window for uplink 2 : ______XXXXX_____________________________
Data delay found: 28
09:05:32:setup_element:INFO: Eye window for uplink 3 : ____XXXXX_______________________________
Data delay found: 26
09:05:32:setup_element:INFO: Eye window for uplink 4 : ___XXXXX________________________________
Data delay found: 25
09:05:32:setup_element:INFO: Eye window for uplink 5 : XXXX___________________________________X
Data delay found: 21
09:05:32:setup_element:INFO: Eye window for uplink 6 : XXX___________________________________XX
Data delay found: 20
09:05:32:setup_element:INFO: Eye window for uplink 7 : _________________________________XXXXXX_
Data delay found: 15
09:05:32:setup_element:INFO: Eye window for uplink 8 : _________________________XXXX___________
Data delay found: 6
09:05:32:setup_element:INFO: Eye window for uplink 9 : _____________________________XXXXX______
Data delay found: 11
09:05:32:setup_element:INFO: Eye window for uplink 10: _________________________XXXXXX_________
Data delay found: 7
09:05:32:setup_element:INFO: Eye window for uplink 11: _____________________________XXXXX______
Data delay found: 11
09:05:32:setup_element:INFO: Eye window for uplink 12: ___________________________XXXXX________
Data delay found: 9
09:05:32:setup_element:INFO: Eye window for uplink 13: ______________________________XXXXX_____
Data delay found: 12
09:05:32:setup_element:INFO: Eye window for uplink 14: ___________________________XXXX_________
Data delay found: 8
09:05:32:setup_element:INFO: Eye window for uplink 15: _____________________________XXXXX______
Data delay found: 11
09:05:32:setup_element:INFO: Setting the data phase to 33 for uplink 0
09:05:32:setup_element:INFO: Setting the data phase to 28 for uplink 1
09:05:32:setup_element:INFO: Setting the data phase to 28 for uplink 2
09:05:32:setup_element:INFO: Setting the data phase to 26 for uplink 3
09:05:32:setup_element:INFO: Setting the data phase to 25 for uplink 4
09:05:32:setup_element:INFO: Setting the data phase to 21 for uplink 5
09:05:32:setup_element:INFO: Setting the data phase to 20 for uplink 6
09:05:32:setup_element:INFO: Setting the data phase to 15 for uplink 7
09:05:32:setup_element:INFO: Setting the data phase to 6 for uplink 8
09:05:32:setup_element:INFO: Setting the data phase to 11 for uplink 9
09:05:32:setup_element:INFO: Setting the data phase to 7 for uplink 10
09:05:32:setup_element:INFO: Setting the data phase to 11 for uplink 11
09:05:32:setup_element:INFO: Setting the data phase to 9 for uplink 12
09:05:32:setup_element:INFO: Setting the data phase to 12 for uplink 13
09:05:32:setup_element:INFO: Setting the data phase to 8 for uplink 14
09:05:32:setup_element:INFO: Setting the data phase to 11 for uplink 15
09:05:32:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: _______________________________________________________________________XXXXXXX__
Uplink 3: _______________________________________________________________________XXXXXXX__
Uplink 4: ______________________________________________________________________XXXXXXX___
Uplink 5: ______________________________________________________________________XXXXXXX___
Uplink 6: _______________________________________________________________________XXXXXX___
Uplink 7: _______________________________________________________________________XXXXXX___
Uplink 8: ________________________________________________________________________________
Uplink 9: ________________________________________________________________________________
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 1:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 5:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 8:
Optimal Phase: 6
Window Length: 36
Eye Window: _________________________XXXX___________
Uplink 9:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 10:
Optimal Phase: 7
Window Length: 34
Eye Window: _________________________XXXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 8
Window Length: 36
Eye Window: ___________________________XXXX_________
Uplink 15:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
]
09:05:32:setup_element:INFO: Beginning SMX ASICs map scan
09:05:32:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
09:05:32:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:05:32:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
09:05:32:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
09:05:32:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
09:05:32:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
09:05:32:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
09:05:32:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
09:05:32:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
09:05:32:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
09:05:32:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
09:05:32:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
09:05:32:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
09:05:32:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
09:05:32:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
09:05:33:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
09:05:33:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
09:05:33:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
09:05:33:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
09:05:33:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
09:05:33:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
09:05:34:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: _______________________________________________________________________XXXXXXX__
Uplink 3: _______________________________________________________________________XXXXXXX__
Uplink 4: ______________________________________________________________________XXXXXXX___
Uplink 5: ______________________________________________________________________XXXXXXX___
Uplink 6: _______________________________________________________________________XXXXXX___
Uplink 7: _______________________________________________________________________XXXXXX___
Uplink 8: ________________________________________________________________________________
Uplink 9: ________________________________________________________________________________
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 1:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 5:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 8:
Optimal Phase: 6
Window Length: 36
Eye Window: _________________________XXXX___________
Uplink 9:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 10:
Optimal Phase: 7
Window Length: 34
Eye Window: _________________________XXXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 8
Window Length: 36
Eye Window: ___________________________XXXX_________
Uplink 15:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
09:05:34:setup_element:INFO: Performing Elink synchronization
09:05:34:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
09:05:34:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:05:34:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
09:05:34:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
09:05:34:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
09:05:34:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
09:05:35:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
09:05:35:febtest:INFO: Add. | ASIC-ID | T [C] | Vddm [mV]
09:05:36:febtest:INFO: 1-0 | XA-000-08-002-001-008-025-13 | 28.2 | 1206.9
09:05:36:febtest:INFO: 8-1 | XA-000-08-002-001-008-015-10 | 15.6 | 1259.6
09:05:36:febtest:INFO: 3-2 | XA-000-08-002-001-008-032-04 | 21.9 | 1236.2
09:05:36:febtest:INFO: 10-3 | XA-000-08-002-001-008-023-13 | 34.6 | 1189.2
09:05:36:febtest:INFO: 5-4 | XA-000-08-002-001-008-009-10 | 21.9 | 1247.9
09:05:37:febtest:INFO: 12-5 | XA-000-08-002-001-008-041-04 | 25.1 | 1218.6
09:05:37:febtest:INFO: 7-6 | XA-000-08-002-001-008-013-10 | 15.6 | 1271.2
09:05:37:febtest:INFO: 14-7 | XA-000-08-002-001-008-038-04 | 34.6 | 1195.1
09:05:37:ST3_smx:INFO: Configuring SMX FAST
09:05:39:ST3_smx:INFO: chip: 1-0 31.389742 C 1200.969315 mV
09:05:39:ST3_smx:INFO: Electrons
09:05:39:ST3_smx:INFO: # loops 0
09:05:41:ST3_smx:INFO: # loops 1
09:05:42:ST3_smx:INFO: # loops 2
09:05:44:ST3_smx:INFO: # loops 3
09:05:46:ST3_smx:INFO: # loops 4
09:05:47:ST3_smx:INFO: Total # of broken channels: 0
09:05:47:ST3_smx:INFO: List of broken channels: []
09:05:47:ST3_smx:INFO: Total # of broken channels: 0
09:05:47:ST3_smx:INFO: List of broken channels: []
09:05:48:ST3_smx:INFO: Configuring SMX FAST
09:05:50:ST3_smx:INFO: chip: 8-1 21.902970 C 1242.040240 mV
09:05:50:ST3_smx:INFO: Electrons
09:05:50:ST3_smx:INFO: # loops 0
09:05:51:ST3_smx:INFO: # loops 1
09:05:53:ST3_smx:INFO: # loops 2
09:05:54:ST3_smx:INFO: # loops 3
09:05:56:ST3_smx:INFO: # loops 4
09:05:58:ST3_smx:INFO: Total # of broken channels: 0
09:05:58:ST3_smx:INFO: List of broken channels: []
09:05:58:ST3_smx:INFO: Total # of broken channels: 0
09:05:58:ST3_smx:INFO: List of broken channels: []
09:05:58:ST3_smx:INFO: Configuring SMX FAST
09:06:00:ST3_smx:INFO: chip: 3-2 28.225000 C 1218.600960 mV
09:06:00:ST3_smx:INFO: Electrons
09:06:00:ST3_smx:INFO: # loops 0
09:06:02:ST3_smx:INFO: # loops 1
09:06:03:ST3_smx:INFO: # loops 2
09:06:05:ST3_smx:INFO: # loops 3
09:06:06:ST3_smx:INFO: # loops 4
09:06:08:ST3_smx:INFO: Total # of broken channels: 0
09:06:08:ST3_smx:INFO: List of broken channels: []
09:06:08:ST3_smx:INFO: Total # of broken channels: 0
09:06:08:ST3_smx:INFO: List of broken channels: []
09:06:08:ST3_smx:INFO: Configuring SMX FAST
09:06:10:ST3_smx:INFO: chip: 10-3 31.389742 C 1206.851500 mV
09:06:10:ST3_smx:INFO: Electrons
09:06:10:ST3_smx:INFO: # loops 0
09:06:12:ST3_smx:INFO: # loops 1
09:06:13:ST3_smx:INFO: # loops 2
09:06:15:ST3_smx:INFO: # loops 3
09:06:17:ST3_smx:INFO: # loops 4
09:06:18:ST3_smx:INFO: Total # of broken channels: 0
09:06:18:ST3_smx:INFO: List of broken channels: []
09:06:18:ST3_smx:INFO: Total # of broken channels: 0
09:06:18:ST3_smx:INFO: List of broken channels: []
09:06:19:ST3_smx:INFO: Configuring SMX FAST
09:06:21:ST3_smx:INFO: chip: 5-4 21.902970 C 1253.730060 mV
09:06:21:ST3_smx:INFO: Electrons
09:06:21:ST3_smx:INFO: # loops 0
09:06:22:ST3_smx:INFO: # loops 1
09:06:24:ST3_smx:INFO: # loops 2
09:06:26:ST3_smx:INFO: # loops 3
09:06:27:ST3_smx:INFO: # loops 4
09:06:29:ST3_smx:INFO: Total # of broken channels: 0
09:06:29:ST3_smx:INFO: List of broken channels: []
09:06:29:ST3_smx:INFO: Total # of broken channels: 0
09:06:29:ST3_smx:INFO: List of broken channels: []
09:06:29:ST3_smx:INFO: Configuring SMX FAST
09:06:31:ST3_smx:INFO: chip: 12-5 28.225000 C 1212.728715 mV
09:06:31:ST3_smx:INFO: Electrons
09:06:31:ST3_smx:INFO: # loops 0
09:06:33:ST3_smx:INFO: # loops 1
09:06:34:ST3_smx:INFO: # loops 2
09:06:36:ST3_smx:INFO: # loops 3
09:06:37:ST3_smx:INFO: # loops 4
09:06:39:ST3_smx:INFO: Total # of broken channels: 0
09:06:39:ST3_smx:INFO: List of broken channels: []
09:06:39:ST3_smx:INFO: Total # of broken channels: 0
09:06:39:ST3_smx:INFO: List of broken channels: []
09:06:39:ST3_smx:INFO: Configuring SMX FAST
09:06:41:ST3_smx:INFO: chip: 7-6 25.062742 C 1236.187875 mV
09:06:41:ST3_smx:INFO: Electrons
09:06:41:ST3_smx:INFO: # loops 0
09:06:43:ST3_smx:INFO: # loops 1
09:06:44:ST3_smx:INFO: # loops 2
09:06:46:ST3_smx:INFO: # loops 3
09:06:48:ST3_smx:INFO: # loops 4
09:06:49:ST3_smx:INFO: Total # of broken channels: 0
09:06:49:ST3_smx:INFO: List of broken channels: []
09:06:49:ST3_smx:INFO: Total # of broken channels: 0
09:06:49:ST3_smx:INFO: List of broken channels: []
09:06:50:ST3_smx:INFO: Configuring SMX FAST
09:06:51:ST3_smx:INFO: chip: 14-7 28.225000 C 1212.728715 mV
09:06:51:ST3_smx:INFO: Electrons
09:06:51:ST3_smx:INFO: # loops 0
09:06:53:ST3_smx:INFO: # loops 1
09:06:55:ST3_smx:INFO: # loops 2
09:06:56:ST3_smx:INFO: # loops 3
09:06:58:ST3_smx:INFO: # loops 4
09:06:59:ST3_smx:INFO: Total # of broken channels: 0
09:06:59:ST3_smx:INFO: List of broken channels: []
09:06:59:ST3_smx:INFO: Total # of broken channels: 0
09:06:59:ST3_smx:INFO: List of broken channels: []
09:07:00:febtest:INFO: Add. | ASIC-ID | T [C] | Vddm [mV]
09:07:00:febtest:INFO: 1-0 | XA-000-08-002-001-008-025-13 | 31.4 | 1206.9
09:07:00:febtest:INFO: 8-1 | XA-000-08-002-001-008-015-10 | 21.9 | 1242.0
09:07:01:febtest:INFO: 3-2 | XA-000-08-002-001-008-032-04 | 28.2 | 1218.6
09:07:01:febtest:INFO: 10-3 | XA-000-08-002-001-008-023-13 | 31.4 | 1206.9
09:07:01:febtest:INFO: 5-4 | XA-000-08-002-001-008-009-10 | 21.9 | 1247.9
09:07:01:febtest:INFO: 12-5 | XA-000-08-002-001-008-041-04 | 28.2 | 1212.7
09:07:02:febtest:INFO: 7-6 | XA-000-08-002-001-008-013-10 | 25.1 | 1236.2
09:07:02:febtest:INFO: 14-7 | XA-000-08-002-001-008-038-04 | 31.4 | 1212.7
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Sensor
TEST_DATE : 2024_01_12-09_05_21
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME : L6DL200120 M6DL2B2001202B2 124 A
FEB_SN : 1080
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
SENSOR_ID: 09234
MODULE_NAME: L6DL200120 M6DL2B2001202B2 124 A
MODULE_TYPE:
MODULE_LADDER:
MODULE_MODULE:
MODULE_SIZE: 0
MODULE_GRADE:
---------------------------------------
VI_before_Init : ['2.450', '1.8190', '1.852', '0.5569', '7.000', '1.5420', '7.000', '1.5410']
VI_after__Init : ['2.450', '1.9770', '1.850', '0.6014', '7.000', '1.5430', '7.000', '1.5430']
VI_at__the_End : ['0', '0', '0', '0', '0', '0']
09:07:05:ST3_Shared:INFO: /home/cbm/public_html/Production_LogDir//FEB/FEB_1080/TestDate_2024_01_12-09_05_21/