Go Back
FEB_1113 28.02.24 08:03:21
TextEdit.txt
14:10:22:ST3_hmp4040:INFO: ROHDE&SCHWARZ,HMP4040,123796,HW50020003/SW2.71
14:10:23:febtest:INFO: FEB type: 8.2
14:10:23:febtest:INFO: FEB SN: 2098
14:10:23:febtest:INFO: FEB 8-2 selected
14:10:23:smx_tester:INFO: Setting Elink clock mode to 160 MHz
14:10:53:ST3_Shared:INFO: Listo of operators:Oleksandr S.;
14:10:58:febtest:INFO: FEB type: 8.2
14:10:58:febtest:INFO: FEB SN: 2115
14:11:00:febtest:INFO: FEB 8-2 selected
14:11:00:smx_tester:INFO: Setting Elink clock mode to 160 MHz
14:11:04:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:11:04:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:11:04:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:11:05:febtest:INFO: Testing FEB with SN 2115
14:11:07:smx_tester:INFO: Scanning setup
14:11:07:elinks:INFO: Disabling clock on downlink 0
14:11:07:elinks:INFO: Disabling clock on downlink 1
14:11:07:elinks:INFO: Disabling clock on downlink 2
14:11:07:elinks:INFO: Disabling clock on downlink 3
14:11:07:elinks:INFO: Disabling clock on downlink 4
14:11:07:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:11:07:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:07:elinks:INFO: Disabling clock on downlink 0
14:11:07:elinks:INFO: Disabling clock on downlink 1
14:11:07:elinks:INFO: Disabling clock on downlink 2
14:11:07:elinks:INFO: Disabling clock on downlink 3
14:11:07:elinks:INFO: Disabling clock on downlink 4
14:11:07:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:08:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:08:elinks:INFO: Disabling clock on downlink 0
14:11:08:elinks:INFO: Disabling clock on downlink 1
14:11:08:elinks:INFO: Disabling clock on downlink 2
14:11:08:elinks:INFO: Disabling clock on downlink 3
14:11:08:elinks:INFO: Disabling clock on downlink 4
14:11:08:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:08:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:11:08:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:11:08:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:08:elinks:INFO: Disabling clock on downlink 0
14:11:08:elinks:INFO: Disabling clock on downlink 1
14:11:08:elinks:INFO: Disabling clock on downlink 2
14:11:08:elinks:INFO: Disabling clock on downlink 3
14:11:08:elinks:INFO: Disabling clock on downlink 4
14:11:08:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:08:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:11:08:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:08:elinks:INFO: Disabling clock on downlink 0
14:11:08:elinks:INFO: Disabling clock on downlink 1
14:11:08:elinks:INFO: Disabling clock on downlink 2
14:11:08:elinks:INFO: Disabling clock on downlink 3
14:11:08:elinks:INFO: Disabling clock on downlink 4
14:11:08:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:08:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:11:08:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:08:setup_element:INFO: Scanning clock phase
14:11:08:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:08:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:11:08:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:11:08:setup_element:INFO: Eye window for uplink 16: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:11:08:setup_element:INFO: Eye window for uplink 17: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:11:08:setup_element:INFO: Eye window for uplink 18: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:08:setup_element:INFO: Eye window for uplink 19: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:08:setup_element:INFO: Eye window for uplink 22: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:08:setup_element:INFO: Eye window for uplink 23: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:08:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:11:08:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:11:08:setup_element:INFO: Eye window for uplink 26: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:08:setup_element:INFO: Eye window for uplink 27: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:08:setup_element:INFO: Eye window for uplink 28: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:08:setup_element:INFO: Eye window for uplink 29: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:08:setup_element:INFO: Eye window for uplink 30: X________________________________________________________________________XXXXXXX
Clock Delay: 36
14:11:08:setup_element:INFO: Eye window for uplink 31: X________________________________________________________________________XXXXXXX
Clock Delay: 36
14:11:08:setup_element:INFO: Setting the clock phase to 35 for group 0, downlink 2
14:11:08:setup_element:INFO: Scanning data phases
14:11:08:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:09:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:11:14:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:11:14:setup_element:INFO: Eye window for uplink 16: ___________________________________XXXX_
Data delay found: 16
14:11:14:setup_element:INFO: Eye window for uplink 17: _______________________________XXXX_____
Data delay found: 12
14:11:14:setup_element:INFO: Eye window for uplink 18: XXX__________________________________XXX
Data delay found: 19
14:11:14:setup_element:INFO: Eye window for uplink 19: __________________________________XXXXX_
Data delay found: 16
14:11:14:setup_element:INFO: Eye window for uplink 22: X_________________________________XXXXX_
Data delay found: 17
14:11:14:setup_element:INFO: Eye window for uplink 23: _________________________________XXXXX__
Data delay found: 15
14:11:14:setup_element:INFO: Eye window for uplink 24: _____XXXXX______________________________
Data delay found: 27
14:11:14:setup_element:INFO: Eye window for uplink 25: _______XXXXXX___________________________
Data delay found: 29
14:11:14:setup_element:INFO: Eye window for uplink 26: ________XXXX____________________________
Data delay found: 29
14:11:14:setup_element:INFO: Eye window for uplink 27: ___________XXXXXX_______________________
Data delay found: 33
14:11:14:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
14:11:14:setup_element:INFO: Eye window for uplink 29: ____________XXXXXX______________________
Data delay found: 34
14:11:14:setup_element:INFO: Eye window for uplink 30: ________________XXXXXX__________________
Data delay found: 38
14:11:14:setup_element:INFO: Eye window for uplink 31: ______________XXXXXXX___________________
Data delay found: 37
14:11:14:setup_element:INFO: Setting the data phase to 16 for uplink 16
14:11:14:setup_element:INFO: Setting the data phase to 12 for uplink 17
14:11:14:setup_element:INFO: Setting the data phase to 19 for uplink 18
14:11:14:setup_element:INFO: Setting the data phase to 16 for uplink 19
14:11:14:setup_element:INFO: Setting the data phase to 17 for uplink 22
14:11:14:setup_element:INFO: Setting the data phase to 15 for uplink 23
14:11:14:setup_element:INFO: Setting the data phase to 27 for uplink 24
14:11:14:setup_element:INFO: Setting the data phase to 29 for uplink 25
14:11:14:setup_element:INFO: Setting the data phase to 29 for uplink 26
14:11:14:setup_element:INFO: Setting the data phase to 33 for uplink 27
14:11:14:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:11:14:setup_element:INFO: Setting the data phase to 34 for uplink 29
14:11:14:setup_element:INFO: Setting the data phase to 38 for uplink 30
14:11:14:setup_element:INFO: Setting the data phase to 37 for uplink 31
14:11:14:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXX_
Uplink 19: ________________________________________________________________________XXXXXXX_
Uplink 22: ________________________________________________________________________XXXXXXX_
Uplink 23: ________________________________________________________________________XXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: ________________________________________________________________________XXXXXXX_
Uplink 27: ________________________________________________________________________XXXXXXX_
Uplink 28: ________________________________________________________________________XXXXXXX_
Uplink 29: ________________________________________________________________________XXXXXXX_
Uplink 30: X________________________________________________________________________XXXXXXX
Uplink 31: X________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 17:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
Uplink 18:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 19:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 22:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 23:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 26:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 27:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 38
Window Length: 34
Eye Window: ________________XXXXXX__________________
Uplink 31:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXXXX___________________
]
14:11:14:setup_element:INFO: Beginning SMX ASICs map scan
14:11:14:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:14:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:11:14:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:11:14:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:11:14:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:11:14:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:11:14:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:11:14:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:11:14:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:11:15:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:11:15:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:11:15:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:11:15:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:11:15:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:11:15:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:11:15:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:11:15:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:11:15:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:11:15:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:11:17:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXX_
Uplink 19: ________________________________________________________________________XXXXXXX_
Uplink 22: ________________________________________________________________________XXXXXXX_
Uplink 23: ________________________________________________________________________XXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: ________________________________________________________________________XXXXXXX_
Uplink 27: ________________________________________________________________________XXXXXXX_
Uplink 28: ________________________________________________________________________XXXXXXX_
Uplink 29: ________________________________________________________________________XXXXXXX_
Uplink 30: X________________________________________________________________________XXXXXXX
Uplink 31: X________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 17:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
Uplink 18:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 19:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 22:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 23:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 26:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 27:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 38
Window Length: 34
Eye Window: ________________XXXXXX__________________
Uplink 31:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXXXX___________________
14:11:17:setup_element:INFO: Performing Elink synchronization
14:11:17:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:17:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:11:17:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:11:17:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:11:17:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:11:17:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:11:17:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
14:11:18:smx_tester:INFO: Scanning setup
14:11:18:elinks:INFO: Disabling clock on downlink 0
14:11:18:elinks:INFO: Disabling clock on downlink 1
14:11:18:elinks:INFO: Disabling clock on downlink 2
14:11:18:elinks:INFO: Disabling clock on downlink 3
14:11:18:elinks:INFO: Disabling clock on downlink 4
14:11:18:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:11:18:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:18:elinks:INFO: Disabling clock on downlink 0
14:11:18:elinks:INFO: Disabling clock on downlink 1
14:11:18:elinks:INFO: Disabling clock on downlink 2
14:11:18:elinks:INFO: Disabling clock on downlink 3
14:11:18:elinks:INFO: Disabling clock on downlink 4
14:11:18:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:18:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:18:elinks:INFO: Disabling clock on downlink 0
14:11:18:elinks:INFO: Disabling clock on downlink 1
14:11:18:elinks:INFO: Disabling clock on downlink 2
14:11:18:elinks:INFO: Disabling clock on downlink 3
14:11:18:elinks:INFO: Disabling clock on downlink 4
14:11:18:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:11:18:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:11:18:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:18:elinks:INFO: Disabling clock on downlink 0
14:11:18:elinks:INFO: Disabling clock on downlink 1
14:11:18:elinks:INFO: Disabling clock on downlink 2
14:11:18:elinks:INFO: Disabling clock on downlink 3
14:11:18:elinks:INFO: Disabling clock on downlink 4
14:11:18:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:11:19:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:19:elinks:INFO: Disabling clock on downlink 0
14:11:19:elinks:INFO: Disabling clock on downlink 1
14:11:19:elinks:INFO: Disabling clock on downlink 2
14:11:19:elinks:INFO: Disabling clock on downlink 3
14:11:19:elinks:INFO: Disabling clock on downlink 4
14:11:19:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:19:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:11:19:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:19:setup_element:INFO: Scanning clock phase
14:11:19:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:19:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:11:19:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:11:19:setup_element:INFO: Eye window for uplink 16: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:11:19:setup_element:INFO: Eye window for uplink 17: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:11:19:setup_element:INFO: Eye window for uplink 18: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:19:setup_element:INFO: Eye window for uplink 19: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:19:setup_element:INFO: Eye window for uplink 22: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:11:19:setup_element:INFO: Eye window for uplink 23: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:11:19:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:11:19:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:11:19:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:11:19:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:11:19:setup_element:INFO: Eye window for uplink 28: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:19:setup_element:INFO: Eye window for uplink 29: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:11:19:setup_element:INFO: Eye window for uplink 30: X_________________________________________________________________________XXXXXX
Clock Delay: 37
14:11:19:setup_element:INFO: Eye window for uplink 31: X_________________________________________________________________________XXXXXX
Clock Delay: 37
14:11:19:setup_element:INFO: Setting the clock phase to 35 for group 0, downlink 2
14:11:19:setup_element:INFO: Scanning data phases
14:11:19:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:19:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:11:25:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:11:25:setup_element:INFO: Eye window for uplink 16: ___________________________________XXXX_
Data delay found: 16
14:11:25:setup_element:INFO: Eye window for uplink 17: _______________________________XXXXX____
Data delay found: 13
14:11:25:setup_element:INFO: Eye window for uplink 18: XX___________________________________XXX
Data delay found: 19
14:11:25:setup_element:INFO: Eye window for uplink 19: __________________________________XXXXX_
Data delay found: 16
14:11:25:setup_element:INFO: Eye window for uplink 22: X_________________________________XXXXXX
Data delay found: 17
14:11:25:setup_element:INFO: Eye window for uplink 23: _________________________________XXXX___
Data delay found: 14
14:11:25:setup_element:INFO: Eye window for uplink 24: ____XXXXX_______________________________
Data delay found: 26
14:11:25:setup_element:INFO: Eye window for uplink 25: ______XXXXXX____________________________
Data delay found: 28
14:11:25:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
14:11:25:setup_element:INFO: Eye window for uplink 27: ____________XXXXX_______________________
Data delay found: 34
14:11:25:setup_element:INFO: Eye window for uplink 28: __________XXXXX_________________________
Data delay found: 32
14:11:25:setup_element:INFO: Eye window for uplink 29: ___________XXXXXX_______________________
Data delay found: 33
14:11:25:setup_element:INFO: Eye window for uplink 30: ________________XXXXXX__________________
Data delay found: 38
14:11:25:setup_element:INFO: Eye window for uplink 31: ______________XXXXXXX___________________
Data delay found: 37
14:11:25:setup_element:INFO: Setting the data phase to 16 for uplink 16
14:11:25:setup_element:INFO: Setting the data phase to 13 for uplink 17
14:11:25:setup_element:INFO: Setting the data phase to 19 for uplink 18
14:11:25:setup_element:INFO: Setting the data phase to 16 for uplink 19
14:11:25:setup_element:INFO: Setting the data phase to 17 for uplink 22
14:11:25:setup_element:INFO: Setting the data phase to 14 for uplink 23
14:11:25:setup_element:INFO: Setting the data phase to 26 for uplink 24
14:11:25:setup_element:INFO: Setting the data phase to 28 for uplink 25
14:11:25:setup_element:INFO: Setting the data phase to 30 for uplink 26
14:11:25:setup_element:INFO: Setting the data phase to 34 for uplink 27
14:11:25:setup_element:INFO: Setting the data phase to 32 for uplink 28
14:11:25:setup_element:INFO: Setting the data phase to 33 for uplink 29
14:11:25:setup_element:INFO: Setting the data phase to 38 for uplink 30
14:11:25:setup_element:INFO: Setting the data phase to 37 for uplink 31
14:11:25:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXX_
Uplink 19: ________________________________________________________________________XXXXXXX_
Uplink 22: _______________________________________________________________________XXXXXXXX_
Uplink 23: _______________________________________________________________________XXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: ________________________________________________________________________XXXXXXX_
Uplink 29: ________________________________________________________________________XXXXXXX_
Uplink 30: X_________________________________________________________________________XXXXXX
Uplink 31: X_________________________________________________________________________XXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 17:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 18:
Optimal Phase: 19
Window Length: 35
Eye Window: XX___________________________________XXX
Uplink 19:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 22:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXXX
Uplink 23:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 30:
Optimal Phase: 38
Window Length: 34
Eye Window: ________________XXXXXX__________________
Uplink 31:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXXXX___________________
]
14:11:25:setup_element:INFO: Beginning SMX ASICs map scan
14:11:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:25:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:11:25:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:11:25:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:11:25:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:11:25:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:11:25:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:11:25:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:11:25:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:11:25:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:11:25:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:11:26:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:11:26:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:11:26:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:11:26:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:11:26:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:11:26:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:11:26:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:11:26:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:11:27:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXX_
Uplink 19: ________________________________________________________________________XXXXXXX_
Uplink 22: _______________________________________________________________________XXXXXXXX_
Uplink 23: _______________________________________________________________________XXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: ________________________________________________________________________XXXXXXX_
Uplink 29: ________________________________________________________________________XXXXXXX_
Uplink 30: X_________________________________________________________________________XXXXXX
Uplink 31: X_________________________________________________________________________XXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 17:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 18:
Optimal Phase: 19
Window Length: 35
Eye Window: XX___________________________________XXX
Uplink 19:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 22:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXXX
Uplink 23:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 30:
Optimal Phase: 38
Window Length: 34
Eye Window: ________________XXXXXX__________________
Uplink 31:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXXXX___________________
14:11:27:setup_element:INFO: Performing Elink synchronization
14:11:27:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:27:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:11:27:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:11:27:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:11:27:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:11:27:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:11:28:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:11:28:febtest:ERROR: HW addres 3 != 2
14:11:34:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:11:35:febtest:INFO: 23-00 | XA-000-08-002-000-004-204-07 | 34.6 | 1183.3
14:11:35:febtest:INFO: 30-01 | XA-000-08-002-000-002-158-00 | 15.6 | 1253.7
14:11:35:febtest:INFO: 28-03 | XA-000-08-002-000-002-157-00 | 40.9 | 1159.7
14:11:35:febtest:INFO: 19-04 | XA-000-08-002-000-003-080-02 | 21.9 | 1230.3
14:11:36:febtest:INFO: 26-05 | XA-000-08-002-000-003-079-05 | 18.7 | 1236.2
14:11:36:febtest:INFO: 17-06 | XA-000-08-002-000-004-125-04 | 31.4 | 1183.3
14:11:36:febtest:INFO: 24-07 | XA-000-08-002-000-004-203-07 | 28.2 | 1195.1
14:11:36:ST3_smx:INFO: Configuring SMX FAST
14:11:38:ST3_smx:INFO: chip: 23-0 28.225000 C 1200.969315 mV
14:11:38:ST3_smx:INFO: Electrons
14:11:38:ST3_smx:INFO: # loops 0
14:11:40:ST3_smx:INFO: # loops 1
14:11:42:ST3_smx:INFO: # loops 2
14:11:43:ST3_smx:INFO: Total # of broken channels: 0
14:11:43:ST3_smx:INFO: List of broken channels: []
14:11:43:ST3_smx:INFO: Total # of broken channels: 0
14:11:43:ST3_smx:INFO: List of broken channels: []
14:11:44:ST3_smx:INFO: Configuring SMX FAST
14:11:46:ST3_smx:INFO: chip: 30-1 12.438562 C 1265.400000 mV
14:11:46:ST3_smx:INFO: Electrons
14:11:46:ST3_smx:INFO: # loops 0
14:11:48:ST3_smx:INFO: # loops 1
14:11:49:ST3_smx:INFO: # loops 2
14:11:51:ST3_smx:INFO: Total # of broken channels: 0
14:11:51:ST3_smx:INFO: List of broken channels: []
14:11:51:ST3_smx:INFO: Total # of broken channels: 0
14:11:51:ST3_smx:INFO: List of broken channels: []
14:11:52:ST3_smx:INFO: Configuring SMX FAST
14:11:54:ST3_smx:INFO: chip: 28-3 37.726682 C 1177.390875 mV
14:11:54:ST3_smx:INFO: Electrons
14:11:54:ST3_smx:INFO: # loops 0
14:11:55:ST3_smx:INFO: # loops 1
14:11:57:ST3_smx:INFO: # loops 2
14:11:58:ST3_smx:INFO: Total # of broken channels: 0
14:11:58:ST3_smx:INFO: List of broken channels: []
14:11:58:ST3_smx:INFO: Total # of broken channels: 3
14:11:58:ST3_smx:INFO: List of broken channels: [1, 3, 5]
14:11:59:ST3_smx:INFO: Configuring SMX FAST
14:12:01:ST3_smx:INFO: chip: 19-4 21.902970 C 1230.330540 mV
14:12:01:ST3_smx:INFO: Electrons
14:12:01:ST3_smx:INFO: # loops 0
14:12:03:ST3_smx:INFO: # loops 1
14:12:04:ST3_smx:INFO: # loops 2
14:12:06:ST3_smx:INFO: Total # of broken channels: 0
14:12:06:ST3_smx:INFO: List of broken channels: []
14:12:06:ST3_smx:INFO: Total # of broken channels: 11
14:12:06:ST3_smx:INFO: List of broken channels: [3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23]
14:12:07:ST3_smx:INFO: Configuring SMX FAST
14:12:09:ST3_smx:INFO: chip: 26-5 25.062742 C 1230.330540 mV
14:12:09:ST3_smx:INFO: Electrons
14:12:09:ST3_smx:INFO: # loops 0
14:12:11:ST3_smx:INFO: # loops 1
14:12:12:ST3_smx:INFO: # loops 2
14:12:14:ST3_smx:INFO: Total # of broken channels: 0
14:12:14:ST3_smx:INFO: List of broken channels: []
14:12:14:ST3_smx:INFO: Total # of broken channels: 43
14:12:14:ST3_smx:INFO: List of broken channels: [15, 17, 21, 23, 31, 35, 45, 55, 57, 59, 61, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 91, 93, 95, 97, 99, 101, 103, 105, 107, 109, 111, 113, 115, 117, 119, 121, 123, 125]
14:12:15:ST3_smx:INFO: Configuring SMX FAST
14:12:17:ST3_smx:INFO: chip: 17-6 37.726682 C 1165.571835 mV
14:12:17:ST3_smx:INFO: Electrons
14:12:17:ST3_smx:INFO: # loops 0
14:12:18:ST3_smx:INFO: # loops 1
14:12:20:ST3_smx:INFO: # loops 2
14:12:21:ST3_smx:INFO: Total # of broken channels: 0
14:12:21:ST3_smx:INFO: List of broken channels: []
14:12:21:ST3_smx:INFO: Total # of broken channels: 0
14:12:21:ST3_smx:INFO: List of broken channels: []
14:12:22:ST3_smx:INFO: Configuring SMX FAST
14:12:24:ST3_smx:INFO: chip: 24-7 37.726682 C 1171.483840 mV
14:12:24:ST3_smx:INFO: Electrons
14:12:24:ST3_smx:INFO: # loops 0
14:12:26:ST3_smx:INFO: # loops 1
14:12:28:ST3_smx:INFO: # loops 2
14:12:29:ST3_smx:INFO: Total # of broken channels: 0
14:12:29:ST3_smx:INFO: List of broken channels: []
14:12:29:ST3_smx:INFO: Total # of broken channels: 0
14:12:29:ST3_smx:INFO: List of broken channels: []
14:12:30:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:12:30:febtest:INFO: 23-00 | XA-000-08-002-000-004-204-07 | 31.4 | 1201.0
14:12:31:febtest:INFO: 30-01 | XA-000-08-002-000-002-158-00 | 12.4 | 1265.4
14:12:31:febtest:INFO: 28-03 | XA-000-08-002-000-002-157-00 | 40.9 | 1177.4
14:12:31:febtest:INFO: 19-04 | XA-000-08-002-000-003-080-02 | 21.9 | 1230.3
14:12:31:febtest:INFO: 26-05 | XA-000-08-002-000-003-079-05 | 25.1 | 1230.3
14:12:31:febtest:INFO: 17-06 | XA-000-08-002-000-004-125-04 | 40.9 | 1165.6
14:12:32:febtest:INFO: 24-07 | XA-000-08-002-000-004-203-07 | 37.7 | 1171.5
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_11_04
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2115
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9210', '1.850', '2.1690']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9230', '1.850', '0.5717']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9200', '1.850', '0.5721']
14:12:37:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:12:40:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:12:40:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:12:40:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:12:40:febtest:INFO: Testing FEB with SN 2115
14:12:43:smx_tester:INFO: Scanning setup
14:12:43:elinks:INFO: Disabling clock on downlink 0
14:12:43:elinks:INFO: Disabling clock on downlink 1
14:12:43:elinks:INFO: Disabling clock on downlink 2
14:12:43:elinks:INFO: Disabling clock on downlink 3
14:12:43:elinks:INFO: Disabling clock on downlink 4
14:12:43:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:12:43:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:12:43:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:12:43:elinks:INFO: Disabling clock on downlink 0
14:12:43:elinks:INFO: Disabling clock on downlink 1
14:12:43:elinks:INFO: Disabling clock on downlink 2
14:12:43:elinks:INFO: Disabling clock on downlink 3
14:12:43:elinks:INFO: Disabling clock on downlink 4
14:12:43:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:12:43:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:12:43:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:12:43:elinks:INFO: Disabling clock on downlink 0
14:12:43:elinks:INFO: Disabling clock on downlink 1
14:12:43:elinks:INFO: Disabling clock on downlink 2
14:12:43:elinks:INFO: Disabling clock on downlink 3
14:12:43:elinks:INFO: Disabling clock on downlink 4
14:12:43:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:12:43:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:12:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:12:43:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:12:43:elinks:INFO: Disabling clock on downlink 0
14:12:43:elinks:INFO: Disabling clock on downlink 1
14:12:43:elinks:INFO: Disabling clock on downlink 2
14:12:43:elinks:INFO: Disabling clock on downlink 3
14:12:43:elinks:INFO: Disabling clock on downlink 4
14:12:43:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:12:43:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:12:43:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:12:43:elinks:INFO: Disabling clock on downlink 0
14:12:43:elinks:INFO: Disabling clock on downlink 1
14:12:43:elinks:INFO: Disabling clock on downlink 2
14:12:43:elinks:INFO: Disabling clock on downlink 3
14:12:43:elinks:INFO: Disabling clock on downlink 4
14:12:43:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:12:43:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:12:44:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:12:44:setup_element:INFO: Scanning clock phase
14:12:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:12:44:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:12:44:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:12:44:setup_element:INFO: Eye window for uplink 16: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:12:44:setup_element:INFO: Eye window for uplink 17: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:12:44:setup_element:INFO: Eye window for uplink 18: ________________________________________________________________________________
Clock Delay: 40
14:12:44:setup_element:INFO: Eye window for uplink 19: ________________________________________________________________________________
Clock Delay: 40
14:12:44:setup_element:INFO: Eye window for uplink 22: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:12:44:setup_element:INFO: Eye window for uplink 23: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:12:44:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:12:44:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:12:44:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:12:44:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:12:44:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:12:44:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:12:44:setup_element:INFO: Eye window for uplink 30: _________________________________________________________________________XXXXXXX
Clock Delay: 36
14:12:44:setup_element:INFO: Eye window for uplink 31: _________________________________________________________________________XXXXXXX
Clock Delay: 36
14:12:44:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:12:44:setup_element:INFO: Scanning data phases
14:12:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:12:44:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:12:49:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:12:49:setup_element:INFO: Eye window for uplink 16: X___________________________________XXX_
Data delay found: 18
14:12:49:setup_element:INFO: Eye window for uplink 17: ________________________________XXXX____
Data delay found: 13
14:12:49:setup_element:INFO: Eye window for uplink 18: XXX__________________________________XXX
Data delay found: 19
14:12:49:setup_element:INFO: Eye window for uplink 19: X__________________________________XXXXX
Data delay found: 17
14:12:49:setup_element:INFO: Eye window for uplink 22: XX_________________________________XXXXX
Data delay found: 18
14:12:49:setup_element:INFO: Eye window for uplink 23: _________________________________XXXXX__
Data delay found: 15
14:12:49:setup_element:INFO: Eye window for uplink 24: ____XXXXXX______________________________
Data delay found: 26
14:12:49:setup_element:INFO: Eye window for uplink 25: _______XXXXX____________________________
Data delay found: 29
14:12:49:setup_element:INFO: Eye window for uplink 26: _________XXXXX__________________________
Data delay found: 31
14:12:49:setup_element:INFO: Eye window for uplink 27: ____________XXXXX_______________________
Data delay found: 34
14:12:49:setup_element:INFO: Eye window for uplink 28: ___________XXXXXX_______________________
Data delay found: 33
14:12:49:setup_element:INFO: Eye window for uplink 29: _____________XXXXXX_____________________
Data delay found: 35
14:12:49:setup_element:INFO: Eye window for uplink 30: ________________XXXXXXX_________________
Data delay found: 39
14:12:49:setup_element:INFO: Eye window for uplink 31: ______________XXXXXXX___________________
Data delay found: 37
14:12:49:setup_element:INFO: Setting the data phase to 18 for uplink 16
14:12:49:setup_element:INFO: Setting the data phase to 13 for uplink 17
14:12:49:setup_element:INFO: Setting the data phase to 19 for uplink 18
14:12:49:setup_element:INFO: Setting the data phase to 17 for uplink 19
14:12:49:setup_element:INFO: Setting the data phase to 18 for uplink 22
14:12:49:setup_element:INFO: Setting the data phase to 15 for uplink 23
14:12:49:setup_element:INFO: Setting the data phase to 26 for uplink 24
14:12:49:setup_element:INFO: Setting the data phase to 29 for uplink 25
14:12:49:setup_element:INFO: Setting the data phase to 31 for uplink 26
14:12:49:setup_element:INFO: Setting the data phase to 34 for uplink 27
14:12:49:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:12:49:setup_element:INFO: Setting the data phase to 35 for uplink 29
14:12:49:setup_element:INFO: Setting the data phase to 39 for uplink 30
14:12:49:setup_element:INFO: Setting the data phase to 37 for uplink 31
14:12:49:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: ______________________________________________________________________XXXXXXXX__
Uplink 17: ______________________________________________________________________XXXXXXXX__
Uplink 18: ________________________________________________________________________________
Uplink 19: ________________________________________________________________________________
Uplink 22: _______________________________________________________________________XXXXXXXX_
Uplink 23: _______________________________________________________________________XXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXX_
Uplink 17:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 18:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 19:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 22:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 23:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 24:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 30:
Optimal Phase: 39
Window Length: 33
Eye Window: ________________XXXXXXX_________________
Uplink 31:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXXXX___________________
]
14:12:49:setup_element:INFO: Beginning SMX ASICs map scan
14:12:49:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:12:49:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:12:49:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:12:49:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:12:49:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:12:49:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:12:49:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:12:49:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:12:49:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:12:50:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:12:50:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:12:50:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:12:50:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:12:50:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:12:50:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:12:50:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:12:50:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:12:50:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:12:50:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:12:51:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: ______________________________________________________________________XXXXXXXX__
Uplink 17: ______________________________________________________________________XXXXXXXX__
Uplink 18: ________________________________________________________________________________
Uplink 19: ________________________________________________________________________________
Uplink 22: _______________________________________________________________________XXXXXXXX_
Uplink 23: _______________________________________________________________________XXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXX_
Uplink 17:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 18:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 19:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 22:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 23:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 24:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 30:
Optimal Phase: 39
Window Length: 33
Eye Window: ________________XXXXXXX_________________
Uplink 31:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXXXX___________________
14:12:51:setup_element:INFO: Performing Elink synchronization
14:12:51:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:12:51:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:12:52:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:12:52:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:12:52:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:12:52:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:12:52:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
14:12:52:smx_tester:INFO: Scanning setup
14:12:52:elinks:INFO: Disabling clock on downlink 0
14:12:52:elinks:INFO: Disabling clock on downlink 1
14:12:52:elinks:INFO: Disabling clock on downlink 2
14:12:52:elinks:INFO: Disabling clock on downlink 3
14:12:52:elinks:INFO: Disabling clock on downlink 4
14:12:52:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:12:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:12:52:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:12:52:elinks:INFO: Disabling clock on downlink 0
14:12:52:elinks:INFO: Disabling clock on downlink 1
14:12:52:elinks:INFO: Disabling clock on downlink 2
14:12:53:elinks:INFO: Disabling clock on downlink 3
14:12:53:elinks:INFO: Disabling clock on downlink 4
14:12:53:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:12:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:12:53:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:12:53:elinks:INFO: Disabling clock on downlink 0
14:12:53:elinks:INFO: Disabling clock on downlink 1
14:12:53:elinks:INFO: Disabling clock on downlink 2
14:12:53:elinks:INFO: Disabling clock on downlink 3
14:12:53:elinks:INFO: Disabling clock on downlink 4
14:12:53:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:12:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:12:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:12:53:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:12:53:elinks:INFO: Disabling clock on downlink 0
14:12:53:elinks:INFO: Disabling clock on downlink 1
14:12:53:elinks:INFO: Disabling clock on downlink 2
14:12:53:elinks:INFO: Disabling clock on downlink 3
14:12:53:elinks:INFO: Disabling clock on downlink 4
14:12:53:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:12:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:12:53:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:12:53:elinks:INFO: Disabling clock on downlink 0
14:12:53:elinks:INFO: Disabling clock on downlink 1
14:12:53:elinks:INFO: Disabling clock on downlink 2
14:12:53:elinks:INFO: Disabling clock on downlink 3
14:12:53:elinks:INFO: Disabling clock on downlink 4
14:12:53:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:12:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:12:53:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:12:53:setup_element:INFO: Scanning clock phase
14:12:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:12:53:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:12:53:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:12:53:setup_element:INFO: Eye window for uplink 16: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:12:53:setup_element:INFO: Eye window for uplink 17: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:12:53:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:12:53:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:12:53:setup_element:INFO: Eye window for uplink 22: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:12:53:setup_element:INFO: Eye window for uplink 23: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:12:53:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:12:53:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:12:53:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:12:53:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:12:53:setup_element:INFO: Eye window for uplink 28: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:12:53:setup_element:INFO: Eye window for uplink 29: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:12:53:setup_element:INFO: Eye window for uplink 30: __________________________________________________________________________XXXXXX
Clock Delay: 36
14:12:53:setup_element:INFO: Eye window for uplink 31: __________________________________________________________________________XXXXXX
Clock Delay: 36
14:12:53:setup_element:INFO: Setting the clock phase to 35 for group 0, downlink 2
14:12:53:setup_element:INFO: Scanning data phases
14:12:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:12:54:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:12:58:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:12:58:setup_element:INFO: Eye window for uplink 16: ___________________________________XXXX_
Data delay found: 16
14:12:58:setup_element:INFO: Eye window for uplink 17: ______________________________XXXXX_____
Data delay found: 12
14:12:58:setup_element:INFO: Eye window for uplink 18: XX__________________________________XXXX
Data delay found: 18
14:12:58:setup_element:INFO: Eye window for uplink 19: __________________________________XXXXX_
Data delay found: 16
14:12:58:setup_element:INFO: Eye window for uplink 22: __________________________________XXXXX_
Data delay found: 16
14:12:58:setup_element:INFO: Eye window for uplink 23: ________________________________XXXXX___
Data delay found: 14
14:12:58:setup_element:INFO: Eye window for uplink 24: ____XXXXX_______________________________
Data delay found: 26
14:12:59:setup_element:INFO: Eye window for uplink 25: ______XXXXX_____________________________
Data delay found: 28
14:12:59:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
14:12:59:setup_element:INFO: Eye window for uplink 27: ___________XXXX_________________________
Data delay found: 32
14:12:59:setup_element:INFO: Eye window for uplink 28: _________XXXXXX_________________________
Data delay found: 31
14:12:59:setup_element:INFO: Eye window for uplink 29: ___________XXXXX________________________
Data delay found: 33
14:12:59:setup_element:INFO: Eye window for uplink 30: _______________XXXXXX___________________
Data delay found: 37
14:12:59:setup_element:INFO: Eye window for uplink 31: _____________XXXXXX_____________________
Data delay found: 35
14:12:59:setup_element:INFO: Setting the data phase to 16 for uplink 16
14:12:59:setup_element:INFO: Setting the data phase to 12 for uplink 17
14:12:59:setup_element:INFO: Setting the data phase to 18 for uplink 18
14:12:59:setup_element:INFO: Setting the data phase to 16 for uplink 19
14:12:59:setup_element:INFO: Setting the data phase to 16 for uplink 22
14:12:59:setup_element:INFO: Setting the data phase to 14 for uplink 23
14:12:59:setup_element:INFO: Setting the data phase to 26 for uplink 24
14:12:59:setup_element:INFO: Setting the data phase to 28 for uplink 25
14:12:59:setup_element:INFO: Setting the data phase to 30 for uplink 26
14:12:59:setup_element:INFO: Setting the data phase to 32 for uplink 27
14:12:59:setup_element:INFO: Setting the data phase to 31 for uplink 28
14:12:59:setup_element:INFO: Setting the data phase to 33 for uplink 29
14:12:59:setup_element:INFO: Setting the data phase to 37 for uplink 30
14:12:59:setup_element:INFO: Setting the data phase to 35 for uplink 31
14:12:59:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 71
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: _______________________________________________________________________XXXXXXXXX
Uplink 19: _______________________________________________________________________XXXXXXXXX
Uplink 22: ________________________________________________________________________XXXXXXX_
Uplink 23: ________________________________________________________________________XXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: ________________________________________________________________________XXXXXXX_
Uplink 29: ________________________________________________________________________XXXXXXX_
Uplink 30: __________________________________________________________________________XXXXXX
Uplink 31: __________________________________________________________________________XXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 17:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 22:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 32
Window Length: 36
Eye Window: ___________XXXX_________________________
Uplink 28:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 30:
Optimal Phase: 37
Window Length: 34
Eye Window: _______________XXXXXX___________________
Uplink 31:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
]
14:12:59:setup_element:INFO: Beginning SMX ASICs map scan
14:12:59:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:12:59:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:12:59:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:12:59:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:12:59:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:12:59:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:12:59:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:12:59:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:12:59:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:12:59:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:12:59:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:12:59:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:12:59:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:13:00:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:13:00:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:13:00:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:13:00:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:13:00:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:13:00:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:13:01:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 71
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: _______________________________________________________________________XXXXXXXXX
Uplink 19: _______________________________________________________________________XXXXXXXXX
Uplink 22: ________________________________________________________________________XXXXXXX_
Uplink 23: ________________________________________________________________________XXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: ________________________________________________________________________XXXXXXX_
Uplink 29: ________________________________________________________________________XXXXXXX_
Uplink 30: __________________________________________________________________________XXXXXX
Uplink 31: __________________________________________________________________________XXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 17:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 22:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 32
Window Length: 36
Eye Window: ___________XXXX_________________________
Uplink 28:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 30:
Optimal Phase: 37
Window Length: 34
Eye Window: _______________XXXXXX___________________
Uplink 31:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
14:13:01:setup_element:INFO: Performing Elink synchronization
14:13:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:13:01:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:13:01:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:13:01:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:13:01:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:13:01:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:13:02:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:13:02:febtest:ERROR: HW addres 3 != 2
14:13:06:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:13:06:febtest:INFO: 23-00 | XA-000-08-002-000-004-204-07 | 37.7 | 1177.4
14:13:06:febtest:INFO: 30-01 | XA-000-08-002-000-002-158-00 | 18.7 | 1253.7
14:13:07:febtest:INFO: 28-03 | XA-000-08-002-000-002-157-00 | 44.1 | 1165.6
14:13:07:febtest:INFO: 19-04 | XA-000-08-002-000-003-080-02 | 25.1 | 1224.5
14:13:07:febtest:INFO: 26-05 | XA-000-08-002-000-003-079-05 | 21.9 | 1242.0
14:13:07:febtest:INFO: 17-06 | XA-000-08-002-000-004-125-04 | 34.6 | 1183.3
14:13:08:febtest:INFO: 24-07 | XA-000-08-002-000-004-203-07 | 31.4 | 1201.0
14:13:08:ST3_smx:INFO: Configuring SMX FAST
14:13:10:ST3_smx:INFO: chip: 23-0 31.389742 C 1200.969315 mV
14:13:10:ST3_smx:INFO: Electrons
14:13:10:ST3_smx:INFO: # loops 0
14:13:12:ST3_smx:INFO: # loops 1
14:13:13:ST3_smx:INFO: # loops 2
14:13:15:ST3_smx:INFO: Total # of broken channels: 0
14:13:15:ST3_smx:INFO: List of broken channels: []
14:13:15:ST3_smx:INFO: Total # of broken channels: 0
14:13:15:ST3_smx:INFO: List of broken channels: []
14:13:16:ST3_smx:INFO: Configuring SMX FAST
14:13:17:ST3_smx:INFO: chip: 30-1 15.590880 C 1265.400000 mV
14:13:17:ST3_smx:INFO: Electrons
14:13:18:ST3_smx:INFO: # loops 0
14:13:19:ST3_smx:INFO: # loops 1
14:13:21:ST3_smx:INFO: # loops 2
14:13:22:ST3_smx:INFO: Total # of broken channels: 0
14:13:22:ST3_smx:INFO: List of broken channels: []
14:13:22:ST3_smx:INFO: Total # of broken channels: 0
14:13:22:ST3_smx:INFO: List of broken channels: []
14:13:23:ST3_smx:INFO: Configuring SMX FAST
14:13:25:ST3_smx:INFO: chip: 28-3 40.898880 C 1177.390875 mV
14:13:25:ST3_smx:INFO: Electrons
14:13:25:ST3_smx:INFO: # loops 0
14:13:27:ST3_smx:INFO: # loops 1
14:13:28:ST3_smx:INFO: # loops 2
14:13:30:ST3_smx:INFO: Total # of broken channels: 1
14:13:30:ST3_smx:INFO: List of broken channels: [1]
14:13:30:ST3_smx:INFO: Total # of broken channels: 2
14:13:30:ST3_smx:INFO: List of broken channels: [1, 3]
14:13:31:ST3_smx:INFO: Configuring SMX FAST
14:13:32:ST3_smx:INFO: chip: 19-4 25.062742 C 1230.330540 mV
14:13:32:ST3_smx:INFO: Electrons
14:13:32:ST3_smx:INFO: # loops 0
14:13:34:ST3_smx:INFO: # loops 1
14:13:36:ST3_smx:INFO: # loops 2
14:13:37:ST3_smx:INFO: Total # of broken channels: 0
14:13:37:ST3_smx:INFO: List of broken channels: []
14:13:37:ST3_smx:INFO: Total # of broken channels: 0
14:13:37:ST3_smx:INFO: List of broken channels: []
14:13:38:ST3_smx:INFO: Configuring SMX FAST
14:13:40:ST3_smx:INFO: chip: 26-5 25.062742 C 1230.330540 mV
14:13:40:ST3_smx:INFO: Electrons
14:13:40:ST3_smx:INFO: # loops 0
14:13:42:ST3_smx:INFO: # loops 1
14:13:43:ST3_smx:INFO: # loops 2
14:13:45:ST3_smx:INFO: Total # of broken channels: 0
14:13:45:ST3_smx:INFO: List of broken channels: []
14:13:45:ST3_smx:INFO: Total # of broken channels: 0
14:13:45:ST3_smx:INFO: List of broken channels: []
14:13:46:ST3_smx:INFO: Configuring SMX FAST
14:13:48:ST3_smx:INFO: chip: 17-6 40.898880 C 1165.571835 mV
14:13:48:ST3_smx:INFO: Electrons
14:13:48:ST3_smx:INFO: # loops 0
14:13:49:ST3_smx:INFO: # loops 1
14:13:51:ST3_smx:INFO: # loops 2
14:13:52:ST3_smx:INFO: Total # of broken channels: 0
14:13:52:ST3_smx:INFO: List of broken channels: []
14:13:52:ST3_smx:INFO: Total # of broken channels: 0
14:13:52:ST3_smx:INFO: List of broken channels: []
14:13:53:ST3_smx:INFO: Configuring SMX FAST
14:13:55:ST3_smx:INFO: chip: 24-7 40.898880 C 1171.483840 mV
14:13:55:ST3_smx:INFO: Electrons
14:13:55:ST3_smx:INFO: # loops 0
14:13:57:ST3_smx:INFO: # loops 1
14:14:00:ST3_smx:INFO: # loops 2
14:14:01:ST3_smx:INFO: Total # of broken channels: 0
14:14:01:ST3_smx:INFO: List of broken channels: []
14:14:01:ST3_smx:INFO: Total # of broken channels: 0
14:14:01:ST3_smx:INFO: List of broken channels: []
14:14:02:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:14:02:febtest:INFO: 23-00 | XA-000-08-002-000-004-204-07 | 31.4 | 1201.0
14:14:03:febtest:INFO: 30-01 | XA-000-08-002-000-002-158-00 | 15.6 | 1271.2
14:14:03:febtest:INFO: 28-03 | XA-000-08-002-000-002-157-00 | 40.9 | 1177.4
14:14:03:febtest:INFO: 19-04 | XA-000-08-002-000-003-080-02 | 25.1 | 1230.3
14:14:03:febtest:INFO: 26-05 | XA-000-08-002-000-003-079-05 | 25.1 | 1236.2
14:14:04:febtest:INFO: 17-06 | XA-000-08-002-000-004-125-04 | 40.9 | 1165.6
14:14:04:febtest:INFO: 24-07 | XA-000-08-002-000-004-203-07 | 40.9 | 1165.6
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_12_40
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2115
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9060', '1.850', '2.2950']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9180', '1.850', '0.5488']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9140', '1.850', '0.5489']
14:14:28:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:15:36:febtest:INFO: FEB type: 8.2
14:15:36:febtest:INFO: FEB SN: 2117
14:15:38:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:15:38:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:15:38:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:15:39:febtest:INFO: Testing FEB with SN 2117
14:15:41:smx_tester:INFO: Scanning setup
14:15:41:elinks:INFO: Disabling clock on downlink 0
14:15:41:elinks:INFO: Disabling clock on downlink 1
14:15:41:elinks:INFO: Disabling clock on downlink 2
14:15:41:elinks:INFO: Disabling clock on downlink 3
14:15:41:elinks:INFO: Disabling clock on downlink 4
14:15:41:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:15:41:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:15:41:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:15:41:elinks:INFO: Disabling clock on downlink 0
14:15:41:elinks:INFO: Disabling clock on downlink 1
14:15:41:elinks:INFO: Disabling clock on downlink 2
14:15:41:elinks:INFO: Disabling clock on downlink 3
14:15:41:elinks:INFO: Disabling clock on downlink 4
14:15:41:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:15:41:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:15:42:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:15:42:elinks:INFO: Disabling clock on downlink 0
14:15:42:elinks:INFO: Disabling clock on downlink 1
14:15:42:elinks:INFO: Disabling clock on downlink 2
14:15:42:elinks:INFO: Disabling clock on downlink 3
14:15:42:elinks:INFO: Disabling clock on downlink 4
14:15:42:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:15:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:15:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:15:42:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:15:42:elinks:INFO: Disabling clock on downlink 0
14:15:42:elinks:INFO: Disabling clock on downlink 1
14:15:42:elinks:INFO: Disabling clock on downlink 2
14:15:42:elinks:INFO: Disabling clock on downlink 3
14:15:42:elinks:INFO: Disabling clock on downlink 4
14:15:42:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:15:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:15:42:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:15:42:elinks:INFO: Disabling clock on downlink 0
14:15:42:elinks:INFO: Disabling clock on downlink 1
14:15:42:elinks:INFO: Disabling clock on downlink 2
14:15:42:elinks:INFO: Disabling clock on downlink 3
14:15:42:elinks:INFO: Disabling clock on downlink 4
14:15:42:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:15:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:15:42:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:15:42:setup_element:INFO: Scanning clock phase
14:15:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:15:42:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:15:42:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:15:42:setup_element:INFO: Eye window for uplink 16: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:15:43:setup_element:INFO: Eye window for uplink 17: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:15:43:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:15:43:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:15:43:setup_element:INFO: Eye window for uplink 20: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:15:43:setup_element:INFO: Eye window for uplink 21: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:15:43:setup_element:INFO: Eye window for uplink 22: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:15:43:setup_element:INFO: Eye window for uplink 23: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:15:43:setup_element:INFO: Eye window for uplink 24: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:15:43:setup_element:INFO: Eye window for uplink 25: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:15:43:setup_element:INFO: Eye window for uplink 26: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:15:43:setup_element:INFO: Eye window for uplink 27: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:15:43:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:15:43:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:15:43:setup_element:INFO: Eye window for uplink 30: _________________________________________________________________________XXXXXXX
Clock Delay: 36
14:15:43:setup_element:INFO: Eye window for uplink 31: _________________________________________________________________________XXXXXXX
Clock Delay: 36
14:15:43:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:15:43:setup_element:INFO: Scanning data phases
14:15:43:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:15:43:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:15:48:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:15:48:setup_element:INFO: Eye window for uplink 16: XX___________________________________XXX
Data delay found: 19
14:15:48:setup_element:INFO: Eye window for uplink 17: _________________________________XXXXX__
Data delay found: 15
14:15:48:setup_element:INFO: Eye window for uplink 18: XXX__________________________________XXX
Data delay found: 19
14:15:48:setup_element:INFO: Eye window for uplink 19: X__________________________________XXXX_
Data delay found: 17
14:15:48:setup_element:INFO: Eye window for uplink 20: XX___________________________________XXX
Data delay found: 19
14:15:48:setup_element:INFO: Eye window for uplink 21: XX__________________________________XXXX
Data delay found: 18
14:15:48:setup_element:INFO: Eye window for uplink 22: __________________________________XXXXX_
Data delay found: 16
14:15:48:setup_element:INFO: Eye window for uplink 23: _________________________________XXXX___
Data delay found: 14
14:15:48:setup_element:INFO: Eye window for uplink 24: ____XXXX________________________________
Data delay found: 25
14:15:48:setup_element:INFO: Eye window for uplink 25: ______XXXX______________________________
Data delay found: 27
14:15:48:setup_element:INFO: Eye window for uplink 26: _____XXXXXX_____________________________
Data delay found: 27
14:15:48:setup_element:INFO: Eye window for uplink 27: __________XXX___________________________
Data delay found: 31
14:15:48:setup_element:INFO: Eye window for uplink 28: ___________XXXXXX_______________________
Data delay found: 33
14:15:48:setup_element:INFO: Eye window for uplink 29: ____________XXXXXX______________________
Data delay found: 34
14:15:48:setup_element:INFO: Eye window for uplink 30: ________________XXXXXX__________________
Data delay found: 38
14:15:48:setup_element:INFO: Eye window for uplink 31: ______________XXXXX_X___________________
Data delay found: 37
14:15:48:setup_element:INFO: Setting the data phase to 19 for uplink 16
14:15:48:setup_element:INFO: Setting the data phase to 15 for uplink 17
14:15:48:setup_element:INFO: Setting the data phase to 19 for uplink 18
14:15:48:setup_element:INFO: Setting the data phase to 17 for uplink 19
14:15:48:setup_element:INFO: Setting the data phase to 19 for uplink 20
14:15:48:setup_element:INFO: Setting the data phase to 18 for uplink 21
14:15:48:setup_element:INFO: Setting the data phase to 16 for uplink 22
14:15:48:setup_element:INFO: Setting the data phase to 14 for uplink 23
14:15:48:setup_element:INFO: Setting the data phase to 25 for uplink 24
14:15:48:setup_element:INFO: Setting the data phase to 27 for uplink 25
14:15:48:setup_element:INFO: Setting the data phase to 27 for uplink 26
14:15:48:setup_element:INFO: Setting the data phase to 31 for uplink 27
14:15:48:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:15:48:setup_element:INFO: Setting the data phase to 34 for uplink 29
14:15:48:setup_element:INFO: Setting the data phase to 38 for uplink 30
14:15:48:setup_element:INFO: Setting the data phase to 37 for uplink 31
14:15:48:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ________________________________________________________________________XXXXXXXX
Uplink 21: ________________________________________________________________________XXXXXXXX
Uplink 22: ______________________________________________________________________XXXXXXXXX_
Uplink 23: ______________________________________________________________________XXXXXXXXX_
Uplink 24: ______________________________________________________________________XXXXXXX___
Uplink 25: ______________________________________________________________________XXXXXXX___
Uplink 26: ______________________________________________________________________XXXXXXX___
Uplink 27: ______________________________________________________________________XXXXXXX___
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 19
Window Length: 35
Eye Window: XX___________________________________XXX
Uplink 17:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 18:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 19:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXX_
Uplink 20:
Optimal Phase: 19
Window Length: 35
Eye Window: XX___________________________________XXX
Uplink 21:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 22:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 24:
Optimal Phase: 25
Window Length: 36
Eye Window: ____XXXX________________________________
Uplink 25:
Optimal Phase: 27
Window Length: 36
Eye Window: ______XXXX______________________________
Uplink 26:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 37
Eye Window: __________XXX___________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 38
Window Length: 34
Eye Window: ________________XXXXXX__________________
Uplink 31:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXX_X___________________
]
14:15:48:setup_element:INFO: Beginning SMX ASICs map scan
14:15:48:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:15:48:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:15:48:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:15:48:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:15:48:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:15:48:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:15:48:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:15:49:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:15:49:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:15:49:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
14:15:49:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
14:15:49:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:15:49:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:15:49:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:15:49:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:15:49:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:15:49:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:15:49:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:15:50:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:15:50:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:15:50:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:15:51:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ________________________________________________________________________XXXXXXXX
Uplink 21: ________________________________________________________________________XXXXXXXX
Uplink 22: ______________________________________________________________________XXXXXXXXX_
Uplink 23: ______________________________________________________________________XXXXXXXXX_
Uplink 24: ______________________________________________________________________XXXXXXX___
Uplink 25: ______________________________________________________________________XXXXXXX___
Uplink 26: ______________________________________________________________________XXXXXXX___
Uplink 27: ______________________________________________________________________XXXXXXX___
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 19
Window Length: 35
Eye Window: XX___________________________________XXX
Uplink 17:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 18:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 19:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXX_
Uplink 20:
Optimal Phase: 19
Window Length: 35
Eye Window: XX___________________________________XXX
Uplink 21:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 22:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 24:
Optimal Phase: 25
Window Length: 36
Eye Window: ____XXXX________________________________
Uplink 25:
Optimal Phase: 27
Window Length: 36
Eye Window: ______XXXX______________________________
Uplink 26:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 37
Eye Window: __________XXX___________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 38
Window Length: 34
Eye Window: ________________XXXXXX__________________
Uplink 31:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXX_X___________________
14:15:51:setup_element:INFO: Performing Elink synchronization
14:15:51:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:15:51:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:15:51:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:15:51:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:15:51:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:15:51:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:15:51:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
14:15:52:smx_tester:INFO: Scanning setup
14:15:52:elinks:INFO: Disabling clock on downlink 0
14:15:52:elinks:INFO: Disabling clock on downlink 1
14:15:52:elinks:INFO: Disabling clock on downlink 2
14:15:52:elinks:INFO: Disabling clock on downlink 3
14:15:52:elinks:INFO: Disabling clock on downlink 4
14:15:52:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:15:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:15:52:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:15:52:elinks:INFO: Disabling clock on downlink 0
14:15:52:elinks:INFO: Disabling clock on downlink 1
14:15:52:elinks:INFO: Disabling clock on downlink 2
14:15:52:elinks:INFO: Disabling clock on downlink 3
14:15:52:elinks:INFO: Disabling clock on downlink 4
14:15:52:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:15:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:15:52:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:15:52:elinks:INFO: Disabling clock on downlink 0
14:15:52:elinks:INFO: Disabling clock on downlink 1
14:15:52:elinks:INFO: Disabling clock on downlink 2
14:15:52:elinks:INFO: Disabling clock on downlink 3
14:15:52:elinks:INFO: Disabling clock on downlink 4
14:15:52:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:15:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:15:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:15:52:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:15:52:elinks:INFO: Disabling clock on downlink 0
14:15:52:elinks:INFO: Disabling clock on downlink 1
14:15:52:elinks:INFO: Disabling clock on downlink 2
14:15:52:elinks:INFO: Disabling clock on downlink 3
14:15:52:elinks:INFO: Disabling clock on downlink 4
14:15:52:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:15:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:15:52:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:15:52:elinks:INFO: Disabling clock on downlink 0
14:15:53:elinks:INFO: Disabling clock on downlink 1
14:15:53:elinks:INFO: Disabling clock on downlink 2
14:15:53:elinks:INFO: Disabling clock on downlink 3
14:15:53:elinks:INFO: Disabling clock on downlink 4
14:15:53:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:15:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:15:53:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:15:53:setup_element:INFO: Scanning clock phase
14:15:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:15:53:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:15:53:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:15:53:setup_element:INFO: Eye window for uplink 16: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:15:53:setup_element:INFO: Eye window for uplink 17: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:15:53:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:15:53:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:15:53:setup_element:INFO: Eye window for uplink 20: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:15:53:setup_element:INFO: Eye window for uplink 21: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:15:53:setup_element:INFO: Eye window for uplink 22: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:15:53:setup_element:INFO: Eye window for uplink 23: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:15:53:setup_element:INFO: Eye window for uplink 24: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:15:53:setup_element:INFO: Eye window for uplink 25: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:15:53:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:15:53:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:15:53:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:15:53:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:15:53:setup_element:INFO: Eye window for uplink 30: _________________________________________________________________________XXXXXXX
Clock Delay: 36
14:15:53:setup_element:INFO: Eye window for uplink 31: _________________________________________________________________________XXXXXXX
Clock Delay: 36
14:15:53:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:15:53:setup_element:INFO: Scanning data phases
14:15:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:15:53:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:15:59:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:15:59:setup_element:INFO: Eye window for uplink 16: X____________________________________XXX
Data delay found: 18
14:15:59:setup_element:INFO: Eye window for uplink 17: _________________________________XXXX___
Data delay found: 14
14:15:59:setup_element:INFO: Eye window for uplink 18: XXX__________________________________XXX
Data delay found: 19
14:15:59:setup_element:INFO: Eye window for uplink 19: __________________________________XXXXX_
Data delay found: 16
14:15:59:setup_element:INFO: Eye window for uplink 20: XX___________________________________XXX
Data delay found: 19
14:15:59:setup_element:INFO: Eye window for uplink 21: X___________________________________XXXX
Data delay found: 18
14:15:59:setup_element:INFO: Eye window for uplink 22: __________________________________XXXXX_
Data delay found: 16
14:15:59:setup_element:INFO: Eye window for uplink 23: _________________________________XXXX___
Data delay found: 14
14:15:59:setup_element:INFO: Eye window for uplink 24: ___XXXXX________________________________
Data delay found: 25
14:15:59:setup_element:INFO: Eye window for uplink 25: ______XXXX______________________________
Data delay found: 27
14:15:59:setup_element:INFO: Eye window for uplink 26: _____XXXXXX_____________________________
Data delay found: 27
14:15:59:setup_element:INFO: Eye window for uplink 27: _________XXXXX__________________________
Data delay found: 31
14:15:59:setup_element:INFO: Eye window for uplink 28: ___________XXXX_________________________
Data delay found: 32
14:15:59:setup_element:INFO: Eye window for uplink 29: ____________XXXXX_______________________
Data delay found: 34
14:15:59:setup_element:INFO: Eye window for uplink 30: ________________XXXXX___________________
Data delay found: 38
14:15:59:setup_element:INFO: Eye window for uplink 31: _______________XXXX_____________________
Data delay found: 36
14:15:59:setup_element:INFO: Setting the data phase to 18 for uplink 16
14:15:59:setup_element:INFO: Setting the data phase to 14 for uplink 17
14:15:59:setup_element:INFO: Setting the data phase to 19 for uplink 18
14:15:59:setup_element:INFO: Setting the data phase to 16 for uplink 19
14:15:59:setup_element:INFO: Setting the data phase to 19 for uplink 20
14:15:59:setup_element:INFO: Setting the data phase to 18 for uplink 21
14:15:59:setup_element:INFO: Setting the data phase to 16 for uplink 22
14:15:59:setup_element:INFO: Setting the data phase to 14 for uplink 23
14:15:59:setup_element:INFO: Setting the data phase to 25 for uplink 24
14:15:59:setup_element:INFO: Setting the data phase to 27 for uplink 25
14:15:59:setup_element:INFO: Setting the data phase to 27 for uplink 26
14:15:59:setup_element:INFO: Setting the data phase to 31 for uplink 27
14:15:59:setup_element:INFO: Setting the data phase to 32 for uplink 28
14:15:59:setup_element:INFO: Setting the data phase to 34 for uplink 29
14:15:59:setup_element:INFO: Setting the data phase to 38 for uplink 30
14:15:59:setup_element:INFO: Setting the data phase to 36 for uplink 31
14:15:59:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: _______________________________________________________________________XXXXXXXX_
Uplink 21: _______________________________________________________________________XXXXXXXX_
Uplink 22: ______________________________________________________________________XXXXXXXX__
Uplink 23: ______________________________________________________________________XXXXXXXX__
Uplink 24: ______________________________________________________________________XXXXXXX___
Uplink 25: ______________________________________________________________________XXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXXX__
Uplink 27: _____________________________________________________________________XXXXXXXXX__
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 18
Window Length: 36
Eye Window: X____________________________________XXX
Uplink 17:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 18:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 19:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 20:
Optimal Phase: 19
Window Length: 35
Eye Window: XX___________________________________XXX
Uplink 21:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 22:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 24:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 25:
Optimal Phase: 27
Window Length: 36
Eye Window: ______XXXX______________________________
Uplink 26:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 28:
Optimal Phase: 32
Window Length: 36
Eye Window: ___________XXXX_________________________
Uplink 29:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 30:
Optimal Phase: 38
Window Length: 35
Eye Window: ________________XXXXX___________________
Uplink 31:
Optimal Phase: 36
Window Length: 36
Eye Window: _______________XXXX_____________________
]
14:15:59:setup_element:INFO: Beginning SMX ASICs map scan
14:15:59:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:15:59:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:15:59:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:15:59:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:15:59:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:15:59:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:15:59:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:15:59:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:15:59:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:15:59:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
14:15:59:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
14:15:59:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:15:59:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:16:00:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:16:00:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:16:00:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:16:00:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:16:00:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:16:00:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:16:00:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:16:00:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:16:01:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: _______________________________________________________________________XXXXXXXX_
Uplink 21: _______________________________________________________________________XXXXXXXX_
Uplink 22: ______________________________________________________________________XXXXXXXX__
Uplink 23: ______________________________________________________________________XXXXXXXX__
Uplink 24: ______________________________________________________________________XXXXXXX___
Uplink 25: ______________________________________________________________________XXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXXX__
Uplink 27: _____________________________________________________________________XXXXXXXXX__
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 18
Window Length: 36
Eye Window: X____________________________________XXX
Uplink 17:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 18:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 19:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 20:
Optimal Phase: 19
Window Length: 35
Eye Window: XX___________________________________XXX
Uplink 21:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 22:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 24:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 25:
Optimal Phase: 27
Window Length: 36
Eye Window: ______XXXX______________________________
Uplink 26:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 28:
Optimal Phase: 32
Window Length: 36
Eye Window: ___________XXXX_________________________
Uplink 29:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 30:
Optimal Phase: 38
Window Length: 35
Eye Window: ________________XXXXX___________________
Uplink 31:
Optimal Phase: 36
Window Length: 36
Eye Window: _______________XXXX_____________________
14:16:01:setup_element:INFO: Performing Elink synchronization
14:16:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:16:01:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:16:01:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:16:01:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:16:01:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:16:01:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:16:02:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:16:03:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:16:03:febtest:INFO: 23-00 | XA-000-08-002-000-004-187-11 | 31.4 | 1195.1
14:16:03:febtest:INFO: 30-01 | XA-000-08-002-000-004-194-07 | 34.6 | 1183.3
14:16:04:febtest:INFO: 21-02 | XA-000-08-002-000-004-122-04 | 28.2 | 1206.9
14:16:04:febtest:INFO: 28-03 | XA-000-08-002-000-004-188-11 | 47.3 | 1147.8
14:16:04:febtest:INFO: 19-04 | XA-000-08-002-000-004-124-04 | 34.6 | 1183.3
14:16:04:febtest:INFO: 26-05 | XA-000-08-002-000-004-182-11 | 37.7 | 1177.4
14:16:05:febtest:INFO: 17-06 | XA-000-08-002-000-004-121-04 | 40.9 | 1159.7
14:16:05:febtest:INFO: 24-07 | XA-000-08-002-000-004-190-11 | 47.3 | 1141.9
14:16:05:ST3_smx:INFO: Configuring SMX FAST
14:16:07:ST3_smx:INFO: chip: 23-0 37.726682 C 1171.483840 mV
14:16:07:ST3_smx:INFO: Electrons
14:16:07:ST3_smx:INFO: # loops 0
14:16:09:ST3_smx:INFO: # loops 1
14:16:10:ST3_smx:INFO: # loops 2
14:16:12:ST3_smx:INFO: Total # of broken channels: 0
14:16:12:ST3_smx:INFO: List of broken channels: []
14:16:12:ST3_smx:INFO: Total # of broken channels: 0
14:16:12:ST3_smx:INFO: List of broken channels: []
14:16:13:ST3_smx:INFO: Configuring SMX FAST
14:16:14:ST3_smx:INFO: chip: 30-1 44.073563 C 1159.654860 mV
14:16:14:ST3_smx:INFO: Electrons
14:16:15:ST3_smx:INFO: # loops 0
14:16:16:ST3_smx:INFO: # loops 1
14:16:18:ST3_smx:INFO: # loops 2
14:16:20:ST3_smx:INFO: Total # of broken channels: 0
14:16:20:ST3_smx:INFO: List of broken channels: []
14:16:20:ST3_smx:INFO: Total # of broken channels: 0
14:16:20:ST3_smx:INFO: List of broken channels: []
14:16:21:ST3_smx:INFO: Configuring SMX FAST
14:16:23:ST3_smx:INFO: chip: 21-2 34.556970 C 1195.082160 mV
14:16:23:ST3_smx:INFO: Electrons
14:16:23:ST3_smx:INFO: # loops 0
14:16:25:ST3_smx:INFO: # loops 1
14:16:26:ST3_smx:INFO: # loops 2
14:16:28:ST3_smx:INFO: Total # of broken channels: 0
14:16:28:ST3_smx:INFO: List of broken channels: []
14:16:28:ST3_smx:INFO: Total # of broken channels: 0
14:16:28:ST3_smx:INFO: List of broken channels: []
14:16:29:ST3_smx:INFO: Configuring SMX FAST
14:16:31:ST3_smx:INFO: chip: 28-3 50.430383 C 1147.806000 mV
14:16:31:ST3_smx:INFO: Electrons
14:16:31:ST3_smx:INFO: # loops 0
14:16:32:ST3_smx:INFO: # loops 1
14:16:34:ST3_smx:INFO: # loops 2
14:16:35:ST3_smx:INFO: Total # of broken channels: 0
14:16:35:ST3_smx:INFO: List of broken channels: []
14:16:35:ST3_smx:INFO: Total # of broken channels: 1
14:16:35:ST3_smx:INFO: List of broken channels: [77]
14:16:36:ST3_smx:INFO: Configuring SMX FAST
14:16:38:ST3_smx:INFO: chip: 19-4 47.250730 C 1153.732915 mV
14:16:38:ST3_smx:INFO: Electrons
14:16:38:ST3_smx:INFO: # loops 0
14:16:40:ST3_smx:INFO: # loops 1
14:16:42:ST3_smx:INFO: # loops 2
14:16:43:ST3_smx:INFO: Total # of broken channels: 0
14:16:43:ST3_smx:INFO: List of broken channels: []
14:16:43:ST3_smx:INFO: Total # of broken channels: 0
14:16:43:ST3_smx:INFO: List of broken channels: []
14:16:44:ST3_smx:INFO: Configuring SMX FAST
14:16:46:ST3_smx:INFO: chip: 26-5 44.073563 C 1165.571835 mV
14:16:46:ST3_smx:INFO: Electrons
14:16:46:ST3_smx:INFO: # loops 0
14:16:48:ST3_smx:INFO: # loops 1
14:16:49:ST3_smx:INFO: # loops 2
14:16:51:ST3_smx:INFO: Total # of broken channels: 0
14:16:51:ST3_smx:INFO: List of broken channels: []
14:16:51:ST3_smx:INFO: Total # of broken channels: 0
14:16:51:ST3_smx:INFO: List of broken channels: []
14:16:52:ST3_smx:INFO: Configuring SMX FAST
14:16:54:ST3_smx:INFO: chip: 17-6 44.073563 C 1153.732915 mV
14:16:54:ST3_smx:INFO: Electrons
14:16:54:ST3_smx:INFO: # loops 0
14:16:55:ST3_smx:INFO: # loops 1
14:16:57:ST3_smx:INFO: # loops 2
14:16:58:ST3_smx:INFO: Total # of broken channels: 0
14:16:58:ST3_smx:INFO: List of broken channels: []
14:16:58:ST3_smx:INFO: Total # of broken channels: 0
14:16:58:ST3_smx:INFO: List of broken channels: []
14:16:59:ST3_smx:INFO: Configuring SMX FAST
14:17:01:ST3_smx:INFO: chip: 24-7 44.073563 C 1165.571835 mV
14:17:01:ST3_smx:INFO: Electrons
14:17:01:ST3_smx:INFO: # loops 0
14:17:03:ST3_smx:INFO: # loops 1
14:17:04:ST3_smx:INFO: # loops 2
14:17:06:ST3_smx:INFO: Total # of broken channels: 0
14:17:06:ST3_smx:INFO: List of broken channels: []
14:17:06:ST3_smx:INFO: Total # of broken channels: 0
14:17:06:ST3_smx:INFO: List of broken channels: []
14:17:07:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:17:07:febtest:INFO: 23-00 | XA-000-08-002-000-004-187-11 | 44.1 | 1171.5
14:17:07:febtest:INFO: 30-01 | XA-000-08-002-000-004-194-07 | 47.3 | 1153.7
14:17:08:febtest:INFO: 21-02 | XA-000-08-002-000-004-122-04 | 37.7 | 1195.1
14:17:08:febtest:INFO: 28-03 | XA-000-08-002-000-004-188-11 | 50.4 | 1147.8
14:17:08:febtest:INFO: 19-04 | XA-000-08-002-000-004-124-04 | 47.3 | 1153.7
14:17:08:febtest:INFO: 26-05 | XA-000-08-002-000-004-182-11 | 44.1 | 1171.5
14:17:09:febtest:INFO: 17-06 | XA-000-08-002-000-004-121-04 | 44.1 | 1153.7
14:17:09:febtest:INFO: 24-07 | XA-000-08-002-000-004-190-11 | 44.1 | 1165.6
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_15_38
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2117
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9110', '1.850', '1.9090']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9750', '1.850', '0.3194']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9750', '1.850', '0.3193']
14:17:12:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:18:14:febtest:INFO: FEB type: 8.2
14:18:14:febtest:INFO: FEB SN: 2118
14:18:21:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:18:21:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:18:21:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:18:22:febtest:INFO: Testing FEB with SN 2118
14:18:24:smx_tester:INFO: Scanning setup
14:18:25:elinks:INFO: Disabling clock on downlink 0
14:18:25:elinks:INFO: Disabling clock on downlink 1
14:18:25:elinks:INFO: Disabling clock on downlink 2
14:18:25:elinks:INFO: Disabling clock on downlink 3
14:18:25:elinks:INFO: Disabling clock on downlink 4
14:18:25:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:18:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:18:25:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:18:25:elinks:INFO: Disabling clock on downlink 0
14:18:25:elinks:INFO: Disabling clock on downlink 1
14:18:25:elinks:INFO: Disabling clock on downlink 2
14:18:25:elinks:INFO: Disabling clock on downlink 3
14:18:25:elinks:INFO: Disabling clock on downlink 4
14:18:25:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:18:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:18:25:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:18:25:elinks:INFO: Disabling clock on downlink 0
14:18:25:elinks:INFO: Disabling clock on downlink 1
14:18:25:elinks:INFO: Disabling clock on downlink 2
14:18:25:elinks:INFO: Disabling clock on downlink 3
14:18:25:elinks:INFO: Disabling clock on downlink 4
14:18:25:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:18:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:18:25:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:18:25:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:18:25:elinks:INFO: Disabling clock on downlink 0
14:18:25:elinks:INFO: Disabling clock on downlink 1
14:18:25:elinks:INFO: Disabling clock on downlink 2
14:18:25:elinks:INFO: Disabling clock on downlink 3
14:18:25:elinks:INFO: Disabling clock on downlink 4
14:18:25:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:18:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:18:25:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:18:25:elinks:INFO: Disabling clock on downlink 0
14:18:25:elinks:INFO: Disabling clock on downlink 1
14:18:25:elinks:INFO: Disabling clock on downlink 2
14:18:25:elinks:INFO: Disabling clock on downlink 3
14:18:25:elinks:INFO: Disabling clock on downlink 4
14:18:25:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:18:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:18:25:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:18:25:setup_element:INFO: Scanning clock phase
14:18:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:18:25:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:18:26:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:18:26:setup_element:INFO: Eye window for uplink 16: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:18:26:setup_element:INFO: Eye window for uplink 17: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:18:26:setup_element:INFO: Eye window for uplink 18: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:18:26:setup_element:INFO: Eye window for uplink 19: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:18:26:setup_element:INFO: Eye window for uplink 20: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:18:26:setup_element:INFO: Eye window for uplink 21: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:18:26:setup_element:INFO: Eye window for uplink 22: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:18:26:setup_element:INFO: Eye window for uplink 23: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:18:26:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:18:26:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:18:26:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:18:26:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:18:26:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:18:26:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:18:26:setup_element:INFO: Eye window for uplink 30: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:18:26:setup_element:INFO: Eye window for uplink 31: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:18:26:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:18:26:setup_element:INFO: Scanning data phases
14:18:26:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:18:26:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:18:31:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:18:31:setup_element:INFO: Eye window for uplink 16: _________________________________XXXX___
Data delay found: 14
14:18:31:setup_element:INFO: Eye window for uplink 17: _____________________________XXXXX______
Data delay found: 11
14:18:31:setup_element:INFO: Eye window for uplink 18: XXX_________________________________XXXX
Data delay found: 19
14:18:31:setup_element:INFO: Eye window for uplink 19: X________________________________XXXXXX_
Data delay found: 16
14:18:31:setup_element:INFO: Eye window for uplink 20: ________________________________XXXX____
Data delay found: 13
14:18:31:setup_element:INFO: Eye window for uplink 21: _______________________________XXXXX____
Data delay found: 13
14:18:31:setup_element:INFO: Eye window for uplink 22: _________________________________XXXX___
Data delay found: 14
14:18:31:setup_element:INFO: Eye window for uplink 23: _______________________________XXXX_____
Data delay found: 12
14:18:31:setup_element:INFO: Eye window for uplink 24: ______XXXXX_____________________________
Data delay found: 28
14:18:31:setup_element:INFO: Eye window for uplink 25: _________XXXX___________________________
Data delay found: 30
14:18:31:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
14:18:31:setup_element:INFO: Eye window for uplink 27: ___________XXXX_________________________
Data delay found: 32
14:18:31:setup_element:INFO: Eye window for uplink 28: _________XXXXXX_________________________
Data delay found: 31
14:18:31:setup_element:INFO: Eye window for uplink 29: __________XXXXXXX_______________________
Data delay found: 33
14:18:31:setup_element:INFO: Eye window for uplink 30: ___________XXXXXX_______________________
Data delay found: 33
14:18:31:setup_element:INFO: Eye window for uplink 31: __________XXXXX_________________________
Data delay found: 32
14:18:31:setup_element:INFO: Setting the data phase to 14 for uplink 16
14:18:31:setup_element:INFO: Setting the data phase to 11 for uplink 17
14:18:31:setup_element:INFO: Setting the data phase to 19 for uplink 18
14:18:31:setup_element:INFO: Setting the data phase to 16 for uplink 19
14:18:31:setup_element:INFO: Setting the data phase to 13 for uplink 20
14:18:31:setup_element:INFO: Setting the data phase to 13 for uplink 21
14:18:31:setup_element:INFO: Setting the data phase to 14 for uplink 22
14:18:31:setup_element:INFO: Setting the data phase to 12 for uplink 23
14:18:31:setup_element:INFO: Setting the data phase to 28 for uplink 24
14:18:31:setup_element:INFO: Setting the data phase to 30 for uplink 25
14:18:31:setup_element:INFO: Setting the data phase to 30 for uplink 26
14:18:31:setup_element:INFO: Setting the data phase to 32 for uplink 27
14:18:31:setup_element:INFO: Setting the data phase to 31 for uplink 28
14:18:31:setup_element:INFO: Setting the data phase to 33 for uplink 29
14:18:31:setup_element:INFO: Setting the data phase to 33 for uplink 30
14:18:31:setup_element:INFO: Setting the data phase to 32 for uplink 31
14:18:31:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXXX
Uplink 19: ________________________________________________________________________XXXXXXXX
Uplink 20: _____________________________________________________________________XXXXXXXX___
Uplink 21: _____________________________________________________________________XXXXXXXX___
Uplink 22: _____________________________________________________________________XXXXXXXXX__
Uplink 23: _____________________________________________________________________XXXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: _______________________________________________________________________XXXXXXXX_
Uplink 31: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 17:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 18:
Optimal Phase: 19
Window Length: 33
Eye Window: XXX_________________________________XXXX
Uplink 19:
Optimal Phase: 16
Window Length: 32
Eye Window: X________________________________XXXXXX_
Uplink 20:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 21:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 22:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 23:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 30
Window Length: 36
Eye Window: _________XXXX___________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 32
Window Length: 36
Eye Window: ___________XXXX_________________________
Uplink 28:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 33
Eye Window: __________XXXXXXX_______________________
Uplink 30:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 31:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
]
14:18:31:setup_element:INFO: Beginning SMX ASICs map scan
14:18:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:18:31:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:18:32:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:18:32:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:18:32:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:18:32:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:18:32:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:18:32:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:18:32:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:18:32:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
14:18:32:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
14:18:32:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:18:32:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:18:32:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:18:32:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:18:32:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:18:32:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:18:33:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:18:33:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:18:33:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:18:33:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:18:34:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXXX
Uplink 19: ________________________________________________________________________XXXXXXXX
Uplink 20: _____________________________________________________________________XXXXXXXX___
Uplink 21: _____________________________________________________________________XXXXXXXX___
Uplink 22: _____________________________________________________________________XXXXXXXXX__
Uplink 23: _____________________________________________________________________XXXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: _______________________________________________________________________XXXXXXXX_
Uplink 31: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 17:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 18:
Optimal Phase: 19
Window Length: 33
Eye Window: XXX_________________________________XXXX
Uplink 19:
Optimal Phase: 16
Window Length: 32
Eye Window: X________________________________XXXXXX_
Uplink 20:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 21:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 22:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 23:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 30
Window Length: 36
Eye Window: _________XXXX___________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 32
Window Length: 36
Eye Window: ___________XXXX_________________________
Uplink 28:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 33
Eye Window: __________XXXXXXX_______________________
Uplink 30:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 31:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
14:18:34:setup_element:INFO: Performing Elink synchronization
14:18:34:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:18:34:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:18:34:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:18:34:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:18:34:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:18:34:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:18:34:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
14:18:35:smx_tester:INFO: Scanning setup
14:18:35:elinks:INFO: Disabling clock on downlink 0
14:18:35:elinks:INFO: Disabling clock on downlink 1
14:18:35:elinks:INFO: Disabling clock on downlink 2
14:18:35:elinks:INFO: Disabling clock on downlink 3
14:18:35:elinks:INFO: Disabling clock on downlink 4
14:18:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:18:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:18:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:18:35:elinks:INFO: Disabling clock on downlink 0
14:18:35:elinks:INFO: Disabling clock on downlink 1
14:18:35:elinks:INFO: Disabling clock on downlink 2
14:18:35:elinks:INFO: Disabling clock on downlink 3
14:18:35:elinks:INFO: Disabling clock on downlink 4
14:18:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:18:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:18:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:18:35:elinks:INFO: Disabling clock on downlink 0
14:18:35:elinks:INFO: Disabling clock on downlink 1
14:18:35:elinks:INFO: Disabling clock on downlink 2
14:18:35:elinks:INFO: Disabling clock on downlink 3
14:18:35:elinks:INFO: Disabling clock on downlink 4
14:18:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:18:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:18:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:18:36:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:18:36:elinks:INFO: Disabling clock on downlink 0
14:18:36:elinks:INFO: Disabling clock on downlink 1
14:18:36:elinks:INFO: Disabling clock on downlink 2
14:18:36:elinks:INFO: Disabling clock on downlink 3
14:18:36:elinks:INFO: Disabling clock on downlink 4
14:18:36:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:18:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:18:36:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:18:36:elinks:INFO: Disabling clock on downlink 0
14:18:36:elinks:INFO: Disabling clock on downlink 1
14:18:36:elinks:INFO: Disabling clock on downlink 2
14:18:36:elinks:INFO: Disabling clock on downlink 3
14:18:36:elinks:INFO: Disabling clock on downlink 4
14:18:36:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:18:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:18:36:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:18:36:setup_element:INFO: Scanning clock phase
14:18:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:18:36:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:18:36:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:18:36:setup_element:INFO: Eye window for uplink 16: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:18:36:setup_element:INFO: Eye window for uplink 17: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:18:36:setup_element:INFO: Eye window for uplink 18: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:18:36:setup_element:INFO: Eye window for uplink 19: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:18:36:setup_element:INFO: Eye window for uplink 20: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:18:36:setup_element:INFO: Eye window for uplink 21: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:18:36:setup_element:INFO: Eye window for uplink 22: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:18:36:setup_element:INFO: Eye window for uplink 23: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:18:36:setup_element:INFO: Eye window for uplink 24: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:18:36:setup_element:INFO: Eye window for uplink 25: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:18:36:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:18:36:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:18:36:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:18:36:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:18:36:setup_element:INFO: Eye window for uplink 30: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:18:36:setup_element:INFO: Eye window for uplink 31: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:18:36:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:18:36:setup_element:INFO: Scanning data phases
14:18:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:18:37:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:18:42:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:18:42:setup_element:INFO: Eye window for uplink 16: _________________________________XXXX___
Data delay found: 14
14:18:42:setup_element:INFO: Eye window for uplink 17: _____________________________XXXXX______
Data delay found: 11
14:18:42:setup_element:INFO: Eye window for uplink 18: XXX________________________________XXXXX
Data delay found: 18
14:18:42:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXXX_
Data delay found: 15
14:18:42:setup_element:INFO: Eye window for uplink 20: ________________________________XXXX____
Data delay found: 13
14:18:42:setup_element:INFO: Eye window for uplink 21: ______________________________XXXXX_____
Data delay found: 12
14:18:42:setup_element:INFO: Eye window for uplink 22: ________________________________XXXXX___
Data delay found: 14
14:18:42:setup_element:INFO: Eye window for uplink 23: ______________________________XXXXX_____
Data delay found: 12
14:18:42:setup_element:INFO: Eye window for uplink 24: _____XXXXX______________________________
Data delay found: 27
14:18:42:setup_element:INFO: Eye window for uplink 25: ________XXXXX___________________________
Data delay found: 30
14:18:42:setup_element:INFO: Eye window for uplink 26: _______XXXX_____________________________
Data delay found: 28
14:18:42:setup_element:INFO: Eye window for uplink 27: __________XXXXX_________________________
Data delay found: 32
14:18:42:setup_element:INFO: Eye window for uplink 28: _________XXXXXX_________________________
Data delay found: 31
14:18:42:setup_element:INFO: Eye window for uplink 29: __________XXXXXX________________________
Data delay found: 32
14:18:42:setup_element:INFO: Eye window for uplink 30: ___________XXXXXX_______________________
Data delay found: 33
14:18:42:setup_element:INFO: Eye window for uplink 31: __________XXXXX_________________________
Data delay found: 32
14:18:42:setup_element:INFO: Setting the data phase to 14 for uplink 16
14:18:42:setup_element:INFO: Setting the data phase to 11 for uplink 17
14:18:42:setup_element:INFO: Setting the data phase to 18 for uplink 18
14:18:42:setup_element:INFO: Setting the data phase to 15 for uplink 19
14:18:42:setup_element:INFO: Setting the data phase to 13 for uplink 20
14:18:42:setup_element:INFO: Setting the data phase to 12 for uplink 21
14:18:42:setup_element:INFO: Setting the data phase to 14 for uplink 22
14:18:42:setup_element:INFO: Setting the data phase to 12 for uplink 23
14:18:42:setup_element:INFO: Setting the data phase to 27 for uplink 24
14:18:42:setup_element:INFO: Setting the data phase to 30 for uplink 25
14:18:42:setup_element:INFO: Setting the data phase to 28 for uplink 26
14:18:42:setup_element:INFO: Setting the data phase to 32 for uplink 27
14:18:42:setup_element:INFO: Setting the data phase to 31 for uplink 28
14:18:42:setup_element:INFO: Setting the data phase to 32 for uplink 29
14:18:42:setup_element:INFO: Setting the data phase to 33 for uplink 30
14:18:42:setup_element:INFO: Setting the data phase to 32 for uplink 31
14:18:42:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXXX
Uplink 19: ________________________________________________________________________XXXXXXXX
Uplink 20: _____________________________________________________________________XXXXXXXX___
Uplink 21: _____________________________________________________________________XXXXXXXX___
Uplink 22: _____________________________________________________________________XXXXXXXX___
Uplink 23: _____________________________________________________________________XXXXXXXX___
Uplink 24: ______________________________________________________________________XXXXXXXX__
Uplink 25: ______________________________________________________________________XXXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: _______________________________________________________________________XXXXXXXX_
Uplink 31: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 17:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 18:
Optimal Phase: 18
Window Length: 32
Eye Window: XXX________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 20:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 21:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 22:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 23:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 26:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 28:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 29:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 30:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 31:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
]
14:18:42:setup_element:INFO: Beginning SMX ASICs map scan
14:18:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:18:42:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:18:42:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:18:42:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:18:42:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:18:42:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:18:42:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:18:42:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:18:42:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:18:43:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
14:18:43:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
14:18:43:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:18:43:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:18:43:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:18:43:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:18:43:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:18:43:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:18:43:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:18:43:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:18:43:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:18:43:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:18:45:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXXX
Uplink 19: ________________________________________________________________________XXXXXXXX
Uplink 20: _____________________________________________________________________XXXXXXXX___
Uplink 21: _____________________________________________________________________XXXXXXXX___
Uplink 22: _____________________________________________________________________XXXXXXXX___
Uplink 23: _____________________________________________________________________XXXXXXXX___
Uplink 24: ______________________________________________________________________XXXXXXXX__
Uplink 25: ______________________________________________________________________XXXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: _______________________________________________________________________XXXXXXXX_
Uplink 31: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 17:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 18:
Optimal Phase: 18
Window Length: 32
Eye Window: XXX________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 20:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 21:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 22:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 23:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 26:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 28:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 29:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 30:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 31:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
14:18:45:setup_element:INFO: Performing Elink synchronization
14:18:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:18:45:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:18:45:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:18:45:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:18:45:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:18:45:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:18:45:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:18:46:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:18:47:febtest:INFO: 23-00 | XA-000-08-002-000-000-242-08 | 37.7 | 1201.0
14:18:47:febtest:INFO: 30-01 | XA-000-08-002-000-000-246-08 | 44.1 | 1171.5
14:18:47:febtest:INFO: 21-02 | XA-000-08-002-000-000-243-08 | 44.1 | 1183.3
14:18:47:febtest:INFO: 28-03 | XA-000-08-002-000-000-245-08 | 40.9 | 1177.4
14:18:47:febtest:INFO: 19-04 | XA-000-08-002-000-000-247-08 | 47.3 | 1159.7
14:18:48:febtest:INFO: 26-05 | XA-000-08-002-000-003-069-05 | 31.4 | 1195.1
14:18:48:febtest:INFO: 17-06 | XA-000-08-002-000-000-241-08 | 40.9 | 1171.5
14:18:48:febtest:INFO: 24-07 | XA-000-08-002-000-000-239-15 | 44.1 | 1153.7
14:18:48:ST3_smx:INFO: Configuring SMX FAST
14:18:50:ST3_smx:INFO: chip: 23-0 37.726682 C 1212.728715 mV
14:18:50:ST3_smx:INFO: Electrons
14:18:50:ST3_smx:INFO: # loops 0
14:18:52:ST3_smx:INFO: # loops 1
14:18:53:ST3_smx:INFO: # loops 2
14:18:55:ST3_smx:INFO: Total # of broken channels: 0
14:18:55:ST3_smx:INFO: List of broken channels: []
14:18:55:ST3_smx:INFO: Total # of broken channels: 0
14:18:55:ST3_smx:INFO: List of broken channels: []
14:18:56:ST3_smx:INFO: Configuring SMX FAST
14:18:58:ST3_smx:INFO: chip: 30-1 50.430383 C 1147.806000 mV
14:18:58:ST3_smx:INFO: Electrons
14:18:58:ST3_smx:INFO: # loops 0
14:19:00:ST3_smx:INFO: # loops 1
14:19:01:ST3_smx:INFO: # loops 2
14:19:03:ST3_smx:INFO: Total # of broken channels: 0
14:19:03:ST3_smx:INFO: List of broken channels: []
14:19:03:ST3_smx:INFO: Total # of broken channels: 0
14:19:03:ST3_smx:INFO: List of broken channels: []
14:19:04:ST3_smx:INFO: Configuring SMX FAST
14:19:06:ST3_smx:INFO: chip: 21-2 40.898880 C 1195.082160 mV
14:19:06:ST3_smx:INFO: Electrons
14:19:06:ST3_smx:INFO: # loops 0
14:19:08:ST3_smx:INFO: # loops 1
14:19:09:ST3_smx:INFO: # loops 2
14:19:11:ST3_smx:INFO: Total # of broken channels: 0
14:19:11:ST3_smx:INFO: List of broken channels: []
14:19:11:ST3_smx:INFO: Total # of broken channels: 0
14:19:11:ST3_smx:INFO: List of broken channels: []
14:19:12:ST3_smx:INFO: Configuring SMX FAST
14:19:14:ST3_smx:INFO: chip: 28-3 44.073563 C 1177.390875 mV
14:19:14:ST3_smx:INFO: Electrons
14:19:14:ST3_smx:INFO: # loops 0
14:19:15:ST3_smx:INFO: # loops 1
14:19:17:ST3_smx:INFO: # loops 2
14:19:19:ST3_smx:INFO: Total # of broken channels: 0
14:19:19:ST3_smx:INFO: List of broken channels: []
14:19:19:ST3_smx:INFO: Total # of broken channels: 0
14:19:19:ST3_smx:INFO: List of broken channels: []
14:19:20:ST3_smx:INFO: Configuring SMX FAST
14:19:21:ST3_smx:INFO: chip: 19-4 47.250730 C 1165.571835 mV
14:19:21:ST3_smx:INFO: Electrons
14:19:21:ST3_smx:INFO: # loops 0
14:19:23:ST3_smx:INFO: # loops 1
14:19:25:ST3_smx:INFO: # loops 2
14:19:26:ST3_smx:INFO: Total # of broken channels: 0
14:19:26:ST3_smx:INFO: List of broken channels: []
14:19:26:ST3_smx:INFO: Total # of broken channels: 0
14:19:26:ST3_smx:INFO: List of broken channels: []
14:19:27:ST3_smx:INFO: Configuring SMX FAST
14:19:29:ST3_smx:INFO: chip: 26-5 37.726682 C 1183.292940 mV
14:19:29:ST3_smx:INFO: Electrons
14:19:29:ST3_smx:INFO: # loops 0
14:19:31:ST3_smx:INFO: # loops 1
14:19:32:ST3_smx:INFO: # loops 2
14:19:34:ST3_smx:INFO: Total # of broken channels: 0
14:19:34:ST3_smx:INFO: List of broken channels: []
14:19:34:ST3_smx:INFO: Total # of broken channels: 0
14:19:34:ST3_smx:INFO: List of broken channels: []
14:19:35:ST3_smx:INFO: Configuring SMX FAST
14:19:37:ST3_smx:INFO: chip: 17-6 47.250730 C 1165.571835 mV
14:19:37:ST3_smx:INFO: Electrons
14:19:37:ST3_smx:INFO: # loops 0
14:19:39:ST3_smx:INFO: # loops 1
14:19:40:ST3_smx:INFO: # loops 2
14:19:42:ST3_smx:INFO: Total # of broken channels: 0
14:19:42:ST3_smx:INFO: List of broken channels: []
14:19:42:ST3_smx:INFO: Total # of broken channels: 0
14:19:42:ST3_smx:INFO: List of broken channels: []
14:19:43:ST3_smx:INFO: Configuring SMX FAST
14:19:45:ST3_smx:INFO: chip: 24-7 40.898880 C 1189.190035 mV
14:19:45:ST3_smx:INFO: Electrons
14:19:45:ST3_smx:INFO: # loops 0
14:19:46:ST3_smx:INFO: # loops 1
14:19:48:ST3_smx:INFO: # loops 2
14:19:50:ST3_smx:INFO: Total # of broken channels: 0
14:19:50:ST3_smx:INFO: List of broken channels: []
14:19:50:ST3_smx:INFO: Total # of broken channels: 26
14:19:50:ST3_smx:INFO: List of broken channels: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51]
14:19:51:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:19:51:febtest:INFO: 23-00 | XA-000-08-002-000-000-242-08 | 37.7 | 1218.6
14:19:51:febtest:INFO: 30-01 | XA-000-08-002-000-000-246-08 | 53.6 | 1147.8
14:19:51:febtest:INFO: 21-02 | XA-000-08-002-000-000-243-08 | 44.1 | 1195.1
14:19:51:febtest:INFO: 28-03 | XA-000-08-002-000-000-245-08 | 47.3 | 1171.5
14:19:52:febtest:INFO: 19-04 | XA-000-08-002-000-000-247-08 | 50.4 | 1165.6
14:19:52:febtest:INFO: 26-05 | XA-000-08-002-000-003-069-05 | 40.9 | 1183.3
14:19:52:febtest:INFO: 17-06 | XA-000-08-002-000-000-241-08 | 47.3 | 1165.6
14:19:52:febtest:INFO: 24-07 | XA-000-08-002-000-000-239-15 | 40.9 | 1183.3
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_18_21
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2118
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9720', '1.849', '2.6390']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9840', '1.850', '0.3168']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9830', '1.850', '0.3168']
14:19:55:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:20:16:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:20:16:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:20:16:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:20:17:febtest:INFO: Testing FEB with SN 2118
14:20:19:smx_tester:INFO: Scanning setup
14:20:19:elinks:INFO: Disabling clock on downlink 0
14:20:19:elinks:INFO: Disabling clock on downlink 1
14:20:19:elinks:INFO: Disabling clock on downlink 2
14:20:19:elinks:INFO: Disabling clock on downlink 3
14:20:19:elinks:INFO: Disabling clock on downlink 4
14:20:19:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:20:19:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:20:20:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:20:20:elinks:INFO: Disabling clock on downlink 0
14:20:20:elinks:INFO: Disabling clock on downlink 1
14:20:20:elinks:INFO: Disabling clock on downlink 2
14:20:20:elinks:INFO: Disabling clock on downlink 3
14:20:20:elinks:INFO: Disabling clock on downlink 4
14:20:20:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:20:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:20:20:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:20:20:elinks:INFO: Disabling clock on downlink 0
14:20:20:elinks:INFO: Disabling clock on downlink 1
14:20:20:elinks:INFO: Disabling clock on downlink 2
14:20:20:elinks:INFO: Disabling clock on downlink 3
14:20:20:elinks:INFO: Disabling clock on downlink 4
14:20:20:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:20:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:20:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:20:20:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:20:20:elinks:INFO: Disabling clock on downlink 0
14:20:20:elinks:INFO: Disabling clock on downlink 1
14:20:20:elinks:INFO: Disabling clock on downlink 2
14:20:20:elinks:INFO: Disabling clock on downlink 3
14:20:20:elinks:INFO: Disabling clock on downlink 4
14:20:20:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:20:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:20:20:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:20:20:elinks:INFO: Disabling clock on downlink 0
14:20:20:elinks:INFO: Disabling clock on downlink 1
14:20:20:elinks:INFO: Disabling clock on downlink 2
14:20:20:elinks:INFO: Disabling clock on downlink 3
14:20:20:elinks:INFO: Disabling clock on downlink 4
14:20:20:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:20:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:20:20:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:20:20:setup_element:INFO: Scanning clock phase
14:20:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:20:21:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:20:21:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:20:21:setup_element:INFO: Eye window for uplink 16: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:20:21:setup_element:INFO: Eye window for uplink 17: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:20:21:setup_element:INFO: Eye window for uplink 18: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:20:21:setup_element:INFO: Eye window for uplink 19: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:20:21:setup_element:INFO: Eye window for uplink 20: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:20:21:setup_element:INFO: Eye window for uplink 21: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:20:21:setup_element:INFO: Eye window for uplink 22: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:20:21:setup_element:INFO: Eye window for uplink 23: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:20:21:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:20:21:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:20:21:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:20:21:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:20:21:setup_element:INFO: Eye window for uplink 28: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:20:21:setup_element:INFO: Eye window for uplink 29: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:20:21:setup_element:INFO: Eye window for uplink 30: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:20:21:setup_element:INFO: Eye window for uplink 31: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:20:21:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:20:21:setup_element:INFO: Scanning data phases
14:20:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:20:21:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:20:26:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:20:26:setup_element:INFO: Eye window for uplink 16: _________________________________XXXX___
Data delay found: 14
14:20:26:setup_element:INFO: Eye window for uplink 17: _____________________________XXXXX______
Data delay found: 11
14:20:26:setup_element:INFO: Eye window for uplink 18: XXX________________________________XXXXX
Data delay found: 18
14:20:26:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXXX_
Data delay found: 15
14:20:26:setup_element:INFO: Eye window for uplink 20: ________________________________XXXX____
Data delay found: 13
14:20:26:setup_element:INFO: Eye window for uplink 21: ______________________________XXXXX_____
Data delay found: 12
14:20:26:setup_element:INFO: Eye window for uplink 22: ________________________________XXXXX___
Data delay found: 14
14:20:26:setup_element:INFO: Eye window for uplink 23: ______________________________XXXXX_____
Data delay found: 12
14:20:27:setup_element:INFO: Eye window for uplink 24: _____XXXXXX_____________________________
Data delay found: 27
14:20:27:setup_element:INFO: Eye window for uplink 25: _________XXXXX__________________________
Data delay found: 31
14:20:27:setup_element:INFO: Eye window for uplink 26: _______XXXX_____________________________
Data delay found: 28
14:20:27:setup_element:INFO: Eye window for uplink 27: __________XXXXX_________________________
Data delay found: 32
14:20:27:setup_element:INFO: Eye window for uplink 28: _______XXXXXX___________________________
Data delay found: 29
14:20:27:setup_element:INFO: Eye window for uplink 29: _________XXXXXX_________________________
Data delay found: 31
14:20:27:setup_element:INFO: Eye window for uplink 30: ___________XXXXXX_______________________
Data delay found: 33
14:20:27:setup_element:INFO: Eye window for uplink 31: __________XXXXX_________________________
Data delay found: 32
14:20:27:setup_element:INFO: Setting the data phase to 14 for uplink 16
14:20:27:setup_element:INFO: Setting the data phase to 11 for uplink 17
14:20:27:setup_element:INFO: Setting the data phase to 18 for uplink 18
14:20:27:setup_element:INFO: Setting the data phase to 15 for uplink 19
14:20:27:setup_element:INFO: Setting the data phase to 13 for uplink 20
14:20:27:setup_element:INFO: Setting the data phase to 12 for uplink 21
14:20:27:setup_element:INFO: Setting the data phase to 14 for uplink 22
14:20:27:setup_element:INFO: Setting the data phase to 12 for uplink 23
14:20:27:setup_element:INFO: Setting the data phase to 27 for uplink 24
14:20:27:setup_element:INFO: Setting the data phase to 31 for uplink 25
14:20:27:setup_element:INFO: Setting the data phase to 28 for uplink 26
14:20:27:setup_element:INFO: Setting the data phase to 32 for uplink 27
14:20:27:setup_element:INFO: Setting the data phase to 29 for uplink 28
14:20:27:setup_element:INFO: Setting the data phase to 31 for uplink 29
14:20:27:setup_element:INFO: Setting the data phase to 33 for uplink 30
14:20:27:setup_element:INFO: Setting the data phase to 32 for uplink 31
14:20:27:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXX_
Uplink 19: ________________________________________________________________________XXXXXXX_
Uplink 20: _____________________________________________________________________XXXXXXXX___
Uplink 21: _____________________________________________________________________XXXXXXXX___
Uplink 22: _____________________________________________________________________XXXXXXXX___
Uplink 23: _____________________________________________________________________XXXXXXXX___
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: ______________________________________________________________________XXXXXXXXX_
Uplink 29: ______________________________________________________________________XXXXXXXXX_
Uplink 30: _______________________________________________________________________XXXXXXXXX
Uplink 31: _______________________________________________________________________XXXXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 17:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 18:
Optimal Phase: 18
Window Length: 32
Eye Window: XXX________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 20:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 21:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 22:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 23:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 24:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 28:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 29:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 30:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 31:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
]
14:20:27:setup_element:INFO: Beginning SMX ASICs map scan
14:20:27:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:20:27:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:20:27:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:20:27:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:20:27:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:20:27:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:20:27:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:20:27:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:20:27:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:20:27:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
14:20:27:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
14:20:27:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:20:27:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:20:27:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:20:27:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:20:28:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:20:28:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:20:28:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:20:28:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:20:28:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:20:28:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:20:29:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXX_
Uplink 19: ________________________________________________________________________XXXXXXX_
Uplink 20: _____________________________________________________________________XXXXXXXX___
Uplink 21: _____________________________________________________________________XXXXXXXX___
Uplink 22: _____________________________________________________________________XXXXXXXX___
Uplink 23: _____________________________________________________________________XXXXXXXX___
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: ______________________________________________________________________XXXXXXXXX_
Uplink 29: ______________________________________________________________________XXXXXXXXX_
Uplink 30: _______________________________________________________________________XXXXXXXXX
Uplink 31: _______________________________________________________________________XXXXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 17:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 18:
Optimal Phase: 18
Window Length: 32
Eye Window: XXX________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 20:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 21:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 22:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 23:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 24:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 28:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 29:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 30:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 31:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
14:20:29:setup_element:INFO: Performing Elink synchronization
14:20:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:20:29:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:20:29:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:20:29:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:20:30:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:20:30:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:20:30:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
14:20:31:smx_tester:INFO: Scanning setup
14:20:31:elinks:INFO: Disabling clock on downlink 0
14:20:31:elinks:INFO: Disabling clock on downlink 1
14:20:31:elinks:INFO: Disabling clock on downlink 2
14:20:31:elinks:INFO: Disabling clock on downlink 3
14:20:31:elinks:INFO: Disabling clock on downlink 4
14:20:31:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:20:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:20:31:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:20:31:elinks:INFO: Disabling clock on downlink 0
14:20:31:elinks:INFO: Disabling clock on downlink 1
14:20:31:elinks:INFO: Disabling clock on downlink 2
14:20:31:elinks:INFO: Disabling clock on downlink 3
14:20:31:elinks:INFO: Disabling clock on downlink 4
14:20:31:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:20:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:20:31:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:20:31:elinks:INFO: Disabling clock on downlink 0
14:20:31:elinks:INFO: Disabling clock on downlink 1
14:20:31:elinks:INFO: Disabling clock on downlink 2
14:20:31:elinks:INFO: Disabling clock on downlink 3
14:20:31:elinks:INFO: Disabling clock on downlink 4
14:20:31:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:20:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:20:31:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:20:31:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:20:31:elinks:INFO: Disabling clock on downlink 0
14:20:31:elinks:INFO: Disabling clock on downlink 1
14:20:31:elinks:INFO: Disabling clock on downlink 2
14:20:31:elinks:INFO: Disabling clock on downlink 3
14:20:31:elinks:INFO: Disabling clock on downlink 4
14:20:31:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:20:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:20:31:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:20:31:elinks:INFO: Disabling clock on downlink 0
14:20:31:elinks:INFO: Disabling clock on downlink 1
14:20:31:elinks:INFO: Disabling clock on downlink 2
14:20:31:elinks:INFO: Disabling clock on downlink 3
14:20:31:elinks:INFO: Disabling clock on downlink 4
14:20:31:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:20:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:20:31:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:20:31:setup_element:INFO: Scanning clock phase
14:20:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:20:32:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:20:32:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:20:32:setup_element:INFO: Eye window for uplink 16: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:20:32:setup_element:INFO: Eye window for uplink 17: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:20:32:setup_element:INFO: Eye window for uplink 18: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:20:32:setup_element:INFO: Eye window for uplink 19: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:20:32:setup_element:INFO: Eye window for uplink 20: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
14:20:32:setup_element:INFO: Eye window for uplink 21: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
14:20:32:setup_element:INFO: Eye window for uplink 22: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
14:20:32:setup_element:INFO: Eye window for uplink 23: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
14:20:32:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:20:32:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:20:32:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:20:32:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:20:32:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:20:32:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:20:32:setup_element:INFO: Eye window for uplink 30: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:20:32:setup_element:INFO: Eye window for uplink 31: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:20:32:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
14:20:32:setup_element:INFO: Scanning data phases
14:20:32:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:20:32:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:20:38:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:20:38:setup_element:INFO: Eye window for uplink 16: __________________________________XXXX__
Data delay found: 15
14:20:38:setup_element:INFO: Eye window for uplink 17: ______________________________XXXX______
Data delay found: 11
14:20:38:setup_element:INFO: Eye window for uplink 18: XXXX________________________________XXXX
Data delay found: 19
14:20:38:setup_element:INFO: Eye window for uplink 19: X_________________________________XXXXXX
Data delay found: 17
14:20:38:setup_element:INFO: Eye window for uplink 20: _________________________________XXXX___
Data delay found: 14
14:20:38:setup_element:INFO: Eye window for uplink 21: _______________________________XXXXX____
Data delay found: 13
14:20:38:setup_element:INFO: Eye window for uplink 22: _________________________________XXXX___
Data delay found: 14
14:20:38:setup_element:INFO: Eye window for uplink 23: _______________________________XXXXX____
Data delay found: 13
14:20:38:setup_element:INFO: Eye window for uplink 24: _____XXXXXXX____________________________
Data delay found: 28
14:20:38:setup_element:INFO: Eye window for uplink 25: __________XXXXX_________________________
Data delay found: 32
14:20:38:setup_element:INFO: Eye window for uplink 26: _______XXXXX____________________________
Data delay found: 29
14:20:38:setup_element:INFO: Eye window for uplink 27: ___________XXXXX________________________
Data delay found: 33
14:20:38:setup_element:INFO: Eye window for uplink 28: _________XXXXXX_________________________
Data delay found: 31
14:20:38:setup_element:INFO: Eye window for uplink 29: ___________XXXXXX_______________________
Data delay found: 33
14:20:38:setup_element:INFO: Eye window for uplink 30: ___________XXXXXXX______________________
Data delay found: 34
14:20:38:setup_element:INFO: Eye window for uplink 31: __________XXXXXX________________________
Data delay found: 32
14:20:38:setup_element:INFO: Setting the data phase to 15 for uplink 16
14:20:38:setup_element:INFO: Setting the data phase to 11 for uplink 17
14:20:38:setup_element:INFO: Setting the data phase to 19 for uplink 18
14:20:38:setup_element:INFO: Setting the data phase to 17 for uplink 19
14:20:38:setup_element:INFO: Setting the data phase to 14 for uplink 20
14:20:38:setup_element:INFO: Setting the data phase to 13 for uplink 21
14:20:38:setup_element:INFO: Setting the data phase to 14 for uplink 22
14:20:38:setup_element:INFO: Setting the data phase to 13 for uplink 23
14:20:38:setup_element:INFO: Setting the data phase to 28 for uplink 24
14:20:38:setup_element:INFO: Setting the data phase to 32 for uplink 25
14:20:38:setup_element:INFO: Setting the data phase to 29 for uplink 26
14:20:38:setup_element:INFO: Setting the data phase to 33 for uplink 27
14:20:38:setup_element:INFO: Setting the data phase to 31 for uplink 28
14:20:38:setup_element:INFO: Setting the data phase to 33 for uplink 29
14:20:38:setup_element:INFO: Setting the data phase to 34 for uplink 30
14:20:38:setup_element:INFO: Setting the data phase to 32 for uplink 31
14:20:38:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXX_
Uplink 19: ________________________________________________________________________XXXXXXX_
Uplink 20: ____________________________________________________________________XXXXXXXXX___
Uplink 21: ____________________________________________________________________XXXXXXXXX___
Uplink 22: ____________________________________________________________________XXXXXXXXX___
Uplink 23: ____________________________________________________________________XXXXXXXXX___
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: _______________________________________________________________________XXXXXXXX_
Uplink 31: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 17:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 18:
Optimal Phase: 19
Window Length: 32
Eye Window: XXXX________________________________XXXX
Uplink 19:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXXX
Uplink 20:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 21:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 22:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 23:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 24:
Optimal Phase: 28
Window Length: 33
Eye Window: _____XXXXXXX____________________________
Uplink 25:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 26:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 30:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 31:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
]
14:20:38:setup_element:INFO: Beginning SMX ASICs map scan
14:20:38:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:20:38:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:20:38:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:20:38:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:20:38:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:20:38:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:20:38:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:20:38:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:20:38:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:20:38:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
14:20:38:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
14:20:38:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:20:38:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:20:38:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:20:39:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:20:39:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:20:39:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:20:39:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:20:39:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:20:39:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:20:39:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:20:40:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXX__
Uplink 17: _______________________________________________________________________XXXXXXX__
Uplink 18: ________________________________________________________________________XXXXXXX_
Uplink 19: ________________________________________________________________________XXXXXXX_
Uplink 20: ____________________________________________________________________XXXXXXXXX___
Uplink 21: ____________________________________________________________________XXXXXXXXX___
Uplink 22: ____________________________________________________________________XXXXXXXXX___
Uplink 23: ____________________________________________________________________XXXXXXXXX___
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: _______________________________________________________________________XXXXXXXX_
Uplink 31: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 17:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 18:
Optimal Phase: 19
Window Length: 32
Eye Window: XXXX________________________________XXXX
Uplink 19:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXXX
Uplink 20:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 21:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 22:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 23:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 24:
Optimal Phase: 28
Window Length: 33
Eye Window: _____XXXXXXX____________________________
Uplink 25:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 26:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 30:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 31:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
14:20:40:setup_element:INFO: Performing Elink synchronization
14:20:40:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:20:40:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:20:41:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:20:41:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:20:41:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:20:41:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:20:41:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:20:42:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:20:42:febtest:INFO: 23-00 | XA-000-08-002-000-000-242-08 | 40.9 | 1201.0
14:20:43:febtest:INFO: 30-01 | XA-000-08-002-000-000-246-08 | 47.3 | 1171.5
14:20:43:febtest:INFO: 21-02 | XA-000-08-002-000-000-243-08 | 47.3 | 1171.5
14:20:43:febtest:INFO: 28-03 | XA-000-08-002-000-000-245-08 | 44.1 | 1183.3
14:20:43:febtest:INFO: 19-04 | XA-000-08-002-000-000-247-08 | 47.3 | 1165.6
14:20:44:febtest:INFO: 26-05 | XA-000-08-002-000-003-069-05 | 31.4 | 1218.6
14:20:44:febtest:INFO: 17-06 | XA-000-08-002-000-000-241-08 | 44.1 | 1177.4
14:20:44:febtest:INFO: 24-07 | XA-000-08-002-000-000-239-15 | 47.3 | 1153.7
14:20:44:ST3_smx:INFO: Configuring SMX FAST
14:20:46:ST3_smx:INFO: chip: 23-0 40.898880 C 1212.728715 mV
14:20:46:ST3_smx:INFO: Electrons
14:20:46:ST3_smx:INFO: # loops 0
14:20:48:ST3_smx:INFO: # loops 1
14:20:49:ST3_smx:INFO: # loops 2
14:20:51:ST3_smx:INFO: Total # of broken channels: 0
14:20:51:ST3_smx:INFO: List of broken channels: []
14:20:51:ST3_smx:INFO: Total # of broken channels: 0
14:20:51:ST3_smx:INFO: List of broken channels: []
14:20:52:ST3_smx:INFO: Configuring SMX FAST
14:20:54:ST3_smx:INFO: chip: 30-1 53.612520 C 1141.874115 mV
14:20:54:ST3_smx:INFO: Electrons
14:20:54:ST3_smx:INFO: # loops 0
14:20:56:ST3_smx:INFO: # loops 1
14:20:57:ST3_smx:INFO: # loops 2
14:20:59:ST3_smx:INFO: Total # of broken channels: 1
14:20:59:ST3_smx:INFO: List of broken channels: [3]
14:20:59:ST3_smx:INFO: Total # of broken channels: 1
14:20:59:ST3_smx:INFO: List of broken channels: [3]
14:21:00:ST3_smx:INFO: Configuring SMX FAST
14:21:02:ST3_smx:INFO: chip: 21-2 44.073563 C 1195.082160 mV
14:21:02:ST3_smx:INFO: Electrons
14:21:02:ST3_smx:INFO: # loops 0
14:21:03:ST3_smx:INFO: # loops 1
14:21:05:ST3_smx:INFO: # loops 2
14:21:06:ST3_smx:INFO: Total # of broken channels: 1
14:21:06:ST3_smx:INFO: List of broken channels: [1]
14:21:06:ST3_smx:INFO: Total # of broken channels: 1
14:21:06:ST3_smx:INFO: List of broken channels: [1]
14:21:07:ST3_smx:INFO: Configuring SMX FAST
14:21:09:ST3_smx:INFO: chip: 28-3 47.250730 C 1171.483840 mV
14:21:09:ST3_smx:INFO: Electrons
14:21:09:ST3_smx:INFO: # loops 0
14:21:11:ST3_smx:INFO: # loops 1
14:21:13:ST3_smx:INFO: # loops 2
14:21:14:ST3_smx:INFO: Total # of broken channels: 0
14:21:14:ST3_smx:INFO: List of broken channels: []
14:21:14:ST3_smx:INFO: Total # of broken channels: 0
14:21:14:ST3_smx:INFO: List of broken channels: []
14:21:15:ST3_smx:INFO: Configuring SMX FAST
14:21:17:ST3_smx:INFO: chip: 19-4 50.430383 C 1159.654860 mV
14:21:17:ST3_smx:INFO: Electrons
14:21:17:ST3_smx:INFO: # loops 0
14:21:19:ST3_smx:INFO: # loops 1
14:21:20:ST3_smx:INFO: # loops 2
14:21:22:ST3_smx:INFO: Total # of broken channels: 0
14:21:22:ST3_smx:INFO: List of broken channels: []
14:21:22:ST3_smx:INFO: Total # of broken channels: 0
14:21:22:ST3_smx:INFO: List of broken channels: []
14:21:23:ST3_smx:INFO: Configuring SMX FAST
14:21:25:ST3_smx:INFO: chip: 26-5 40.898880 C 1183.292940 mV
14:21:25:ST3_smx:INFO: Electrons
14:21:25:ST3_smx:INFO: # loops 0
14:21:27:ST3_smx:INFO: # loops 1
14:21:28:ST3_smx:INFO: # loops 2
14:21:30:ST3_smx:INFO: Total # of broken channels: 2
14:21:30:ST3_smx:INFO: List of broken channels: [125, 127]
14:21:30:ST3_smx:INFO: Total # of broken channels: 2
14:21:30:ST3_smx:INFO: List of broken channels: [125, 127]
14:21:31:ST3_smx:INFO: Configuring SMX FAST
14:21:33:ST3_smx:INFO: chip: 17-6 47.250730 C 1165.571835 mV
14:21:33:ST3_smx:INFO: Electrons
14:21:33:ST3_smx:INFO: # loops 0
14:21:34:ST3_smx:INFO: # loops 1
14:21:36:ST3_smx:INFO: # loops 2
14:21:37:ST3_smx:INFO: Total # of broken channels: 0
14:21:37:ST3_smx:INFO: List of broken channels: []
14:21:37:ST3_smx:INFO: Total # of broken channels: 1
14:21:37:ST3_smx:INFO: List of broken channels: [127]
14:21:38:ST3_smx:INFO: Configuring SMX FAST
14:21:40:ST3_smx:INFO: chip: 24-7 40.898880 C 1189.190035 mV
14:21:40:ST3_smx:INFO: Electrons
14:21:40:ST3_smx:INFO: # loops 0
14:21:42:ST3_smx:INFO: # loops 1
14:21:44:ST3_smx:INFO: # loops 2
14:21:45:ST3_smx:INFO: Total # of broken channels: 0
14:21:45:ST3_smx:INFO: List of broken channels: []
14:21:45:ST3_smx:INFO: Total # of broken channels: 0
14:21:45:ST3_smx:INFO: List of broken channels: []
14:21:46:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:21:46:febtest:INFO: 23-00 | XA-000-08-002-000-000-242-08 | 40.9 | 1224.5
14:21:47:febtest:INFO: 30-01 | XA-000-08-002-000-000-246-08 | 53.6 | 1147.8
14:21:47:febtest:INFO: 21-02 | XA-000-08-002-000-000-243-08 | 47.3 | 1195.1
14:21:47:febtest:INFO: 28-03 | XA-000-08-002-000-000-245-08 | 47.3 | 1171.5
14:21:47:febtest:INFO: 19-04 | XA-000-08-002-000-000-247-08 | 50.4 | 1159.7
14:21:48:febtest:INFO: 26-05 | XA-000-08-002-000-003-069-05 | 40.9 | 1183.3
14:21:48:febtest:INFO: 17-06 | XA-000-08-002-000-000-241-08 | 47.3 | 1165.6
14:21:48:febtest:INFO: 24-07 | XA-000-08-002-000-000-239-15 | 40.9 | 1183.3
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_20_16
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2118
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9470', '1.850', '2.7600']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9910', '1.850', '0.3174']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9820', '1.850', '0.3173']
14:21:52:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:26:29:febtest:INFO: FEB type: 8.2
14:26:29:febtest:INFO: FEB SN: 1121
14:26:31:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:26:31:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:26:31:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:26:32:febtest:INFO: Testing FEB with SN 1121
14:26:34:smx_tester:INFO: Scanning setup
14:26:34:elinks:INFO: Disabling clock on downlink 0
14:26:34:elinks:INFO: Disabling clock on downlink 1
14:26:34:elinks:INFO: Disabling clock on downlink 2
14:26:34:elinks:INFO: Disabling clock on downlink 3
14:26:34:elinks:INFO: Disabling clock on downlink 4
14:26:34:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:26:34:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:26:34:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:26:34:elinks:INFO: Disabling clock on downlink 0
14:26:34:elinks:INFO: Disabling clock on downlink 1
14:26:35:elinks:INFO: Disabling clock on downlink 2
14:26:35:elinks:INFO: Disabling clock on downlink 3
14:26:35:elinks:INFO: Disabling clock on downlink 4
14:26:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:26:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:26:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:26:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:26:35:elinks:INFO: Disabling clock on downlink 0
14:26:35:elinks:INFO: Disabling clock on downlink 1
14:26:35:elinks:INFO: Disabling clock on downlink 2
14:26:35:elinks:INFO: Disabling clock on downlink 3
14:26:35:elinks:INFO: Disabling clock on downlink 4
14:26:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:26:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:26:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:26:35:elinks:INFO: Disabling clock on downlink 0
14:26:35:elinks:INFO: Disabling clock on downlink 1
14:26:35:elinks:INFO: Disabling clock on downlink 2
14:26:35:elinks:INFO: Disabling clock on downlink 3
14:26:35:elinks:INFO: Disabling clock on downlink 4
14:26:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:26:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:26:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:26:35:elinks:INFO: Disabling clock on downlink 0
14:26:35:elinks:INFO: Disabling clock on downlink 1
14:26:35:elinks:INFO: Disabling clock on downlink 2
14:26:35:elinks:INFO: Disabling clock on downlink 3
14:26:35:elinks:INFO: Disabling clock on downlink 4
14:26:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:26:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:26:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:26:35:setup_element:INFO: Scanning clock phase
14:26:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:26:35:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:26:36:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:26:36:setup_element:INFO: Eye window for uplink 0 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:26:36:setup_element:INFO: Eye window for uplink 1 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:26:36:setup_element:INFO: Eye window for uplink 2 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:26:36:setup_element:INFO: Eye window for uplink 3 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:26:36:setup_element:INFO: Eye window for uplink 4 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:26:36:setup_element:INFO: Eye window for uplink 5 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:26:36:setup_element:INFO: Eye window for uplink 6 : ________________________________________________________________________XXXXX___
Clock Delay: 34
14:26:36:setup_element:INFO: Eye window for uplink 7 : ________________________________________________________________________XXXXX___
Clock Delay: 34
14:26:36:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:26:36:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:26:36:setup_element:INFO: Eye window for uplink 10: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:26:36:setup_element:INFO: Eye window for uplink 11: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:26:36:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:26:36:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:26:36:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:26:36:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:26:36:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:26:36:setup_element:INFO: Scanning data phases
14:26:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:26:36:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:26:41:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:26:41:setup_element:WARNING: Group 0, downlink 1, uplink 0: No True values in scanned data!
Traceback (most recent call last):
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/setup_element.py", line 261, in characterize_data_phases
data_delay, window_len = find_center(fcl)
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/hctsp.py", line 87, in find_center
raise Exception("No True values in scanned data!")
Exception: No True values in scanned data!
14:26:41:setup_element:WARNING: Group 0, downlink 1, uplink 1: No True values in scanned data!
Traceback (most recent call last):
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/setup_element.py", line 261, in characterize_data_phases
data_delay, window_len = find_center(fcl)
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/hctsp.py", line 87, in find_center
raise Exception("No True values in scanned data!")
Exception: No True values in scanned data!
14:26:41:setup_element:INFO: Eye window for uplink 2 : _______XXXXX____________________________
Data delay found: 29
14:26:41:setup_element:INFO: Eye window for uplink 3 : ____XXXXX_______________________________
Data delay found: 26
14:26:41:setup_element:INFO: Eye window for uplink 4 : _______XXXXX____________________________
Data delay found: 29
14:26:41:setup_element:INFO: Eye window for uplink 5 : ___XXXXX________________________________
Data delay found: 25
14:26:41:setup_element:INFO: Eye window for uplink 6 : XXX____________________________________X
Data delay found: 20
14:26:41:setup_element:INFO: Eye window for uplink 7 : __________________________________XXXXX_
Data delay found: 16
14:26:41:setup_element:INFO: Eye window for uplink 8 : _______________________XXXXX____________
Data delay found: 5
14:26:41:setup_element:INFO: Eye window for uplink 9 : _____________________________XXXXX______
Data delay found: 11
14:26:41:setup_element:INFO: Eye window for uplink 10: _____________________________XXXXX______
Data delay found: 11
14:26:41:setup_element:INFO: Eye window for uplink 11: _________________________________XXXX___
Data delay found: 14
14:26:41:setup_element:INFO: Eye window for uplink 12: ____________________________XXXXX_______
Data delay found: 10
14:26:41:setup_element:INFO: Eye window for uplink 13: _______________________________XXXX_____
Data delay found: 12
14:26:41:setup_element:INFO: Eye window for uplink 14: _____________________________XXXX_______
Data delay found: 10
14:26:41:setup_element:INFO: Eye window for uplink 15: _______________________________XXXX_____
Data delay found: 12
14:26:41:setup_element:INFO: Setting the data phase to 29 for uplink 2
14:26:41:setup_element:INFO: Setting the data phase to 26 for uplink 3
14:26:41:setup_element:INFO: Setting the data phase to 29 for uplink 4
14:26:41:setup_element:INFO: Setting the data phase to 25 for uplink 5
14:26:41:setup_element:INFO: Setting the data phase to 20 for uplink 6
14:26:41:setup_element:INFO: Setting the data phase to 16 for uplink 7
14:26:41:setup_element:INFO: Setting the data phase to 5 for uplink 8
14:26:41:setup_element:INFO: Setting the data phase to 11 for uplink 9
14:26:41:setup_element:INFO: Setting the data phase to 11 for uplink 10
14:26:41:setup_element:INFO: Setting the data phase to 14 for uplink 11
14:26:41:setup_element:INFO: Setting the data phase to 10 for uplink 12
14:26:41:setup_element:INFO: Setting the data phase to 12 for uplink 13
14:26:41:setup_element:INFO: Setting the data phase to 10 for uplink 14
14:26:41:setup_element:INFO: Setting the data phase to 12 for uplink 15
14:26:41:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: _______________________________________________________________________XXXXXXX__
Uplink 3: _______________________________________________________________________XXXXXXX__
Uplink 4: ________________________________________________________________________XXXXXXX_
Uplink 5: ________________________________________________________________________XXXXXXX_
Uplink 6: ________________________________________________________________________XXXXX___
Uplink 7: ________________________________________________________________________XXXXX___
Uplink 8: _____________________________________________________________________XXXXXXX____
Uplink 9: _____________________________________________________________________XXXXXXX____
Uplink 10: ______________________________________________________________________XXXXXXXX__
Uplink 11: ______________________________________________________________________XXXXXXXX__
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 2:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 5:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 6:
Optimal Phase: 20
Window Length: 36
Eye Window: XXX____________________________________X
Uplink 7:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 8:
Optimal Phase: 5
Window Length: 35
Eye Window: _______________________XXXXX____________
Uplink 9:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 10:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 11:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 12:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 13:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
Uplink 14:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 15:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
]
14:26:41:setup_element:INFO: Beginning SMX ASICs map scan
14:26:41:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:26:41:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:26:41:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:26:41:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:26:41:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:26:41:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:26:41:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:26:42:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:26:42:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:26:42:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:26:42:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:26:42:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:26:42:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:26:42:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:26:42:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:26:42:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:26:42:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:26:42:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:26:42:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:26:43:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:26:43:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:26:44:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: _______________________________________________________________________XXXXXXX__
Uplink 3: _______________________________________________________________________XXXXXXX__
Uplink 4: ________________________________________________________________________XXXXXXX_
Uplink 5: ________________________________________________________________________XXXXXXX_
Uplink 6: ________________________________________________________________________XXXXX___
Uplink 7: ________________________________________________________________________XXXXX___
Uplink 8: _____________________________________________________________________XXXXXXX____
Uplink 9: _____________________________________________________________________XXXXXXX____
Uplink 10: ______________________________________________________________________XXXXXXXX__
Uplink 11: ______________________________________________________________________XXXXXXXX__
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 2:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 5:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 6:
Optimal Phase: 20
Window Length: 36
Eye Window: XXX____________________________________X
Uplink 7:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 8:
Optimal Phase: 5
Window Length: 35
Eye Window: _______________________XXXXX____________
Uplink 9:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 10:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 11:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 12:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 13:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
Uplink 14:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 15:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
14:26:44:setup_element:INFO: Performing Elink synchronization
14:26:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:26:44:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:26:44:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:26:44:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:26:44:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:26:44:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:26:44:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
14:26:45:smx_tester:INFO: Scanning setup
14:26:45:elinks:INFO: Disabling clock on downlink 0
14:26:45:elinks:INFO: Disabling clock on downlink 1
14:26:45:elinks:INFO: Disabling clock on downlink 2
14:26:45:elinks:INFO: Disabling clock on downlink 3
14:26:45:elinks:INFO: Disabling clock on downlink 4
14:26:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:26:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:26:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:26:45:elinks:INFO: Disabling clock on downlink 0
14:26:45:elinks:INFO: Disabling clock on downlink 1
14:26:45:elinks:INFO: Disabling clock on downlink 2
14:26:45:elinks:INFO: Disabling clock on downlink 3
14:26:45:elinks:INFO: Disabling clock on downlink 4
14:26:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:26:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:26:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:26:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:26:45:elinks:INFO: Disabling clock on downlink 0
14:26:45:elinks:INFO: Disabling clock on downlink 1
14:26:45:elinks:INFO: Disabling clock on downlink 2
14:26:45:elinks:INFO: Disabling clock on downlink 3
14:26:45:elinks:INFO: Disabling clock on downlink 4
14:26:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:26:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:26:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:26:45:elinks:INFO: Disabling clock on downlink 0
14:26:45:elinks:INFO: Disabling clock on downlink 1
14:26:45:elinks:INFO: Disabling clock on downlink 2
14:26:45:elinks:INFO: Disabling clock on downlink 3
14:26:45:elinks:INFO: Disabling clock on downlink 4
14:26:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:26:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:26:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:26:45:elinks:INFO: Disabling clock on downlink 0
14:26:46:elinks:INFO: Disabling clock on downlink 1
14:26:46:elinks:INFO: Disabling clock on downlink 2
14:26:46:elinks:INFO: Disabling clock on downlink 3
14:26:46:elinks:INFO: Disabling clock on downlink 4
14:26:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:26:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:26:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:26:46:setup_element:INFO: Scanning clock phase
14:26:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:26:46:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:26:46:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:26:46:setup_element:INFO: Eye window for uplink 0 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:26:46:setup_element:INFO: Eye window for uplink 1 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:26:46:setup_element:INFO: Eye window for uplink 2 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:26:46:setup_element:INFO: Eye window for uplink 3 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:26:46:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:26:46:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:26:46:setup_element:INFO: Eye window for uplink 6 : ________________________________________________________________________XXXXX___
Clock Delay: 34
14:26:46:setup_element:INFO: Eye window for uplink 7 : ________________________________________________________________________XXXXX___
Clock Delay: 34
14:26:46:setup_element:INFO: Eye window for uplink 8 : ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
14:26:46:setup_element:INFO: Eye window for uplink 9 : ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
14:26:46:setup_element:INFO: Eye window for uplink 10: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:26:46:setup_element:INFO: Eye window for uplink 11: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:26:46:setup_element:INFO: Eye window for uplink 12: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:26:46:setup_element:INFO: Eye window for uplink 13: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:26:46:setup_element:INFO: Eye window for uplink 14: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:26:46:setup_element:INFO: Eye window for uplink 15: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:26:46:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:26:46:setup_element:INFO: Scanning data phases
14:26:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:26:46:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:26:52:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:26:52:setup_element:INFO: Eye window for uplink 0 : ___________XXXXX________________________
Data delay found: 33
14:26:52:setup_element:INFO: Eye window for uplink 1 : _______XXXXX____________________________
Data delay found: 29
14:26:52:setup_element:INFO: Eye window for uplink 2 : _______XXXXX____________________________
Data delay found: 29
14:26:52:setup_element:INFO: Eye window for uplink 3 : ____XXXXX_______________________________
Data delay found: 26
14:26:52:setup_element:INFO: Eye window for uplink 4 : ______XXXXX_____________________________
Data delay found: 28
14:26:52:setup_element:INFO: Eye window for uplink 5 : ___XXXX_________________________________
Data delay found: 24
14:26:52:setup_element:INFO: Eye window for uplink 6 : XXX___________________________________XX
Data delay found: 20
14:26:52:setup_element:INFO: Eye window for uplink 7 : __________________________________XXXXX_
Data delay found: 16
14:26:52:setup_element:INFO: Eye window for uplink 8 : ________________________XXXX____________
Data delay found: 5
14:26:52:setup_element:INFO: Eye window for uplink 9 : _____________________________XXXX_______
Data delay found: 10
14:26:52:setup_element:INFO: Eye window for uplink 10: _____________________________XXXXXX_____
Data delay found: 11
14:26:52:setup_element:INFO: Eye window for uplink 11: _________________________________XXXXX__
Data delay found: 15
14:26:52:setup_element:INFO: Eye window for uplink 12: ____________________________XXXXX_______
Data delay found: 10
14:26:52:setup_element:INFO: Eye window for uplink 13: _______________________________XXXXX____
Data delay found: 13
14:26:52:setup_element:INFO: Eye window for uplink 14: ____________________________XXXX________
Data delay found: 9
14:26:52:setup_element:INFO: Eye window for uplink 15: ______________________________XXXX______
Data delay found: 11
14:26:52:setup_element:INFO: Setting the data phase to 33 for uplink 0
14:26:52:setup_element:INFO: Setting the data phase to 29 for uplink 1
14:26:52:setup_element:INFO: Setting the data phase to 29 for uplink 2
14:26:52:setup_element:INFO: Setting the data phase to 26 for uplink 3
14:26:52:setup_element:INFO: Setting the data phase to 28 for uplink 4
14:26:52:setup_element:INFO: Setting the data phase to 24 for uplink 5
14:26:52:setup_element:INFO: Setting the data phase to 20 for uplink 6
14:26:52:setup_element:INFO: Setting the data phase to 16 for uplink 7
14:26:52:setup_element:INFO: Setting the data phase to 5 for uplink 8
14:26:52:setup_element:INFO: Setting the data phase to 10 for uplink 9
14:26:52:setup_element:INFO: Setting the data phase to 11 for uplink 10
14:26:52:setup_element:INFO: Setting the data phase to 15 for uplink 11
14:26:52:setup_element:INFO: Setting the data phase to 10 for uplink 12
14:26:52:setup_element:INFO: Setting the data phase to 13 for uplink 13
14:26:52:setup_element:INFO: Setting the data phase to 9 for uplink 14
14:26:52:setup_element:INFO: Setting the data phase to 11 for uplink 15
14:26:52:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: _______________________________________________________________________XXXXXXX__
Uplink 3: _______________________________________________________________________XXXXXXX__
Uplink 4: _______________________________________________________________________XXXXXXXX_
Uplink 5: _______________________________________________________________________XXXXXXXX_
Uplink 6: ________________________________________________________________________XXXXX___
Uplink 7: ________________________________________________________________________XXXXX___
Uplink 8: ____________________________________________________________________XXXXXXXX____
Uplink 9: ____________________________________________________________________XXXXXXXX____
Uplink 10: ______________________________________________________________________XXXXXXXXX_
Uplink 11: ______________________________________________________________________XXXXXXXXX_
Uplink 12: _____________________________________________________________________XXXXXXXX___
Uplink 13: _____________________________________________________________________XXXXXXXX___
Uplink 14: ______________________________________________________________________XXXXXXXX__
Uplink 15: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 5:
Optimal Phase: 24
Window Length: 36
Eye Window: ___XXXX_________________________________
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 8:
Optimal Phase: 5
Window Length: 36
Eye Window: ________________________XXXX____________
Uplink 9:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 10:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 12:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 13:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 14:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 15:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
]
14:26:52:setup_element:INFO: Beginning SMX ASICs map scan
14:26:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:26:52:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:26:52:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:26:52:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:26:52:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:26:52:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:26:52:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:26:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:26:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:26:52:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:26:52:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:26:52:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:26:52:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:26:53:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:26:53:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:26:53:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:26:53:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:26:53:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:26:53:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:26:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:26:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:26:54:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: _______________________________________________________________________XXXXXXX__
Uplink 3: _______________________________________________________________________XXXXXXX__
Uplink 4: _______________________________________________________________________XXXXXXXX_
Uplink 5: _______________________________________________________________________XXXXXXXX_
Uplink 6: ________________________________________________________________________XXXXX___
Uplink 7: ________________________________________________________________________XXXXX___
Uplink 8: ____________________________________________________________________XXXXXXXX____
Uplink 9: ____________________________________________________________________XXXXXXXX____
Uplink 10: ______________________________________________________________________XXXXXXXXX_
Uplink 11: ______________________________________________________________________XXXXXXXXX_
Uplink 12: _____________________________________________________________________XXXXXXXX___
Uplink 13: _____________________________________________________________________XXXXXXXX___
Uplink 14: ______________________________________________________________________XXXXXXXX__
Uplink 15: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 5:
Optimal Phase: 24
Window Length: 36
Eye Window: ___XXXX_________________________________
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 8:
Optimal Phase: 5
Window Length: 36
Eye Window: ________________________XXXX____________
Uplink 9:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 10:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 12:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 13:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 14:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 15:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
14:26:54:setup_element:INFO: Performing Elink synchronization
14:26:54:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:26:54:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:26:54:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:26:55:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:26:55:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:26:55:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:26:55:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
14:26:56:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:26:56:febtest:INFO: 01-00 | XA-000-08-002-000-004-143-02 | 34.6 | 1183.3
14:26:57:febtest:INFO: 08-01 | XA-000-08-002-000-004-150-05 | 21.9 | 1218.6
14:26:57:febtest:INFO: 03-02 | XA-000-08-002-000-004-142-02 | 25.1 | 1218.6
14:26:57:febtest:INFO: 10-03 | XA-000-08-002-000-003-081-02 | 31.4 | 1195.1
14:26:57:febtest:INFO: 05-04 | XA-000-08-002-000-003-074-05 | 44.1 | 1159.7
14:26:57:febtest:INFO: 12-05 | XA-000-08-002-000-004-140-02 | 12.4 | 1259.6
14:26:58:febtest:INFO: 07-06 | XA-000-08-002-000-004-202-07 | 31.4 | 1206.9
14:26:58:febtest:INFO: 14-07 | XA-000-08-002-000-004-144-05 | 25.1 | 1224.5
14:26:58:ST3_smx:INFO: Configuring SMX FAST
14:27:00:ST3_smx:INFO: chip: 1-0 34.556970 C 1177.390875 mV
14:27:00:ST3_smx:INFO: Electrons
14:27:00:ST3_smx:INFO: # loops 0
14:27:02:ST3_smx:INFO: # loops 1
14:27:03:ST3_smx:INFO: # loops 2
14:27:05:ST3_smx:INFO: Total # of broken channels: 0
14:27:05:ST3_smx:INFO: List of broken channels: []
14:27:05:ST3_smx:INFO: Total # of broken channels: 0
14:27:05:ST3_smx:INFO: List of broken channels: []
14:27:06:ST3_smx:INFO: Configuring SMX FAST
14:27:08:ST3_smx:INFO: chip: 8-1 28.225000 C 1206.851500 mV
14:27:08:ST3_smx:INFO: Electrons
14:27:08:ST3_smx:INFO: # loops 0
14:27:10:ST3_smx:INFO: # loops 1
14:27:11:ST3_smx:INFO: # loops 2
14:27:13:ST3_smx:INFO: Total # of broken channels: 0
14:27:13:ST3_smx:INFO: List of broken channels: []
14:27:13:ST3_smx:INFO: Total # of broken channels: 0
14:27:13:ST3_smx:INFO: List of broken channels: []
14:27:14:ST3_smx:INFO: Configuring SMX FAST
14:27:16:ST3_smx:INFO: chip: 3-2 28.225000 C 1212.728715 mV
14:27:16:ST3_smx:INFO: Electrons
14:27:16:ST3_smx:INFO: # loops 0
14:27:18:ST3_smx:INFO: # loops 1
14:27:19:ST3_smx:INFO: # loops 2
14:27:21:ST3_smx:INFO: Total # of broken channels: 2
14:27:21:ST3_smx:INFO: List of broken channels: [121, 127]
14:27:21:ST3_smx:INFO: Total # of broken channels: 3
14:27:21:ST3_smx:INFO: List of broken channels: [121, 125, 127]
14:27:22:ST3_smx:INFO: Configuring SMX FAST
14:27:24:ST3_smx:INFO: chip: 10-3 34.556970 C 1195.082160 mV
14:27:24:ST3_smx:INFO: Electrons
14:27:24:ST3_smx:INFO: # loops 0
14:27:26:ST3_smx:INFO: # loops 1
14:27:27:ST3_smx:INFO: # loops 2
14:27:29:ST3_smx:INFO: Total # of broken channels: 0
14:27:29:ST3_smx:INFO: List of broken channels: []
14:27:29:ST3_smx:INFO: Total # of broken channels: 0
14:27:29:ST3_smx:INFO: List of broken channels: []
14:27:30:ST3_smx:INFO: Configuring SMX FAST
14:27:32:ST3_smx:INFO: chip: 5-4 37.726682 C 1183.292940 mV
14:27:32:ST3_smx:INFO: Electrons
14:27:32:ST3_smx:INFO: # loops 0
14:27:34:ST3_smx:INFO: # loops 1
14:27:35:ST3_smx:INFO: # loops 2
14:27:37:ST3_smx:INFO: Total # of broken channels: 0
14:27:37:ST3_smx:INFO: List of broken channels: []
14:27:37:ST3_smx:INFO: Total # of broken channels: 0
14:27:37:ST3_smx:INFO: List of broken channels: []
14:27:38:ST3_smx:INFO: Configuring SMX FAST
14:27:40:ST3_smx:INFO: chip: 12-5 21.902970 C 1242.040240 mV
14:27:40:ST3_smx:INFO: Electrons
14:27:40:ST3_smx:INFO: # loops 0
14:27:42:ST3_smx:INFO: # loops 1
14:27:43:ST3_smx:INFO: # loops 2
14:27:45:ST3_smx:INFO: Total # of broken channels: 5
14:27:45:ST3_smx:INFO: List of broken channels: [1, 3, 13, 15, 17]
14:27:45:ST3_smx:INFO: Total # of broken channels: 6
14:27:45:ST3_smx:INFO: List of broken channels: [1, 3, 11, 13, 15, 17]
14:27:46:ST3_smx:INFO: Configuring SMX FAST
14:27:48:ST3_smx:INFO: chip: 7-6 28.225000 C 1218.600960 mV
14:27:48:ST3_smx:INFO: Electrons
14:27:48:ST3_smx:INFO: # loops 0
14:27:50:ST3_smx:INFO: # loops 1
14:27:52:ST3_smx:INFO: # loops 2
14:27:53:ST3_smx:INFO: Total # of broken channels: 1
14:27:53:ST3_smx:INFO: List of broken channels: [31]
14:27:53:ST3_smx:INFO: Total # of broken channels: 6
14:27:53:ST3_smx:INFO: List of broken channels: [23, 25, 27, 29, 31, 127]
14:27:54:ST3_smx:INFO: Configuring SMX FAST
14:27:56:ST3_smx:INFO: chip: 14-7 28.225000 C 1218.600960 mV
14:27:56:ST3_smx:INFO: Electrons
14:27:56:ST3_smx:INFO: # loops 0
14:27:58:ST3_smx:INFO: # loops 1
14:28:00:ST3_smx:INFO: # loops 2
14:28:01:ST3_smx:INFO: Total # of broken channels: 0
14:28:01:ST3_smx:INFO: List of broken channels: []
14:28:01:ST3_smx:INFO: Total # of broken channels: 0
14:28:01:ST3_smx:INFO: List of broken channels: []
14:28:02:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:28:02:febtest:INFO: 01-00 | XA-000-08-002-000-004-143-02 | 37.7 | 1177.4
14:28:03:febtest:INFO: 08-01 | XA-000-08-002-000-004-150-05 | 28.2 | 1212.7
14:28:03:febtest:INFO: 03-02 | XA-000-08-002-000-004-142-02 | 28.2 | 1212.7
14:28:03:febtest:INFO: 10-03 | XA-000-08-002-000-003-081-02 | 34.6 | 1195.1
14:28:03:febtest:INFO: 05-04 | XA-000-08-002-000-003-074-05 | 37.7 | 1183.3
14:28:03:febtest:INFO: 12-05 | XA-000-08-002-000-004-140-02 | 21.9 | 1242.0
14:28:04:febtest:INFO: 07-06 | XA-000-08-002-000-004-202-07 | 31.4 | 1218.6
14:28:04:febtest:INFO: 14-07 | XA-000-08-002-000-004-144-05 | 28.2 | 1218.6
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_26_31
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1121
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.451', '1.5460', '1.850', '2.6270', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '1.9790', '1.850', '0.4987', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '1.9730', '1.850', '0.3148', '0.000', '0.0000', '0.000', '0.0000']
14:28:09:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:28:30:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:28:30:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:28:30:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:28:30:febtest:INFO: Testing FEB with SN 1121
14:28:33:smx_tester:INFO: Scanning setup
14:28:33:elinks:INFO: Disabling clock on downlink 0
14:28:33:elinks:INFO: Disabling clock on downlink 1
14:28:33:elinks:INFO: Disabling clock on downlink 2
14:28:33:elinks:INFO: Disabling clock on downlink 3
14:28:33:elinks:INFO: Disabling clock on downlink 4
14:28:33:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:28:33:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:28:33:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:28:33:elinks:INFO: Disabling clock on downlink 0
14:28:33:elinks:INFO: Disabling clock on downlink 1
14:28:33:elinks:INFO: Disabling clock on downlink 2
14:28:33:elinks:INFO: Disabling clock on downlink 3
14:28:33:elinks:INFO: Disabling clock on downlink 4
14:28:33:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:28:33:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:28:33:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:28:33:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:28:34:elinks:INFO: Disabling clock on downlink 0
14:28:34:elinks:INFO: Disabling clock on downlink 1
14:28:34:elinks:INFO: Disabling clock on downlink 2
14:28:34:elinks:INFO: Disabling clock on downlink 3
14:28:34:elinks:INFO: Disabling clock on downlink 4
14:28:34:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:28:34:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:28:34:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:28:34:elinks:INFO: Disabling clock on downlink 0
14:28:34:elinks:INFO: Disabling clock on downlink 1
14:28:34:elinks:INFO: Disabling clock on downlink 2
14:28:34:elinks:INFO: Disabling clock on downlink 3
14:28:34:elinks:INFO: Disabling clock on downlink 4
14:28:34:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:28:34:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:28:34:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:28:34:elinks:INFO: Disabling clock on downlink 0
14:28:34:elinks:INFO: Disabling clock on downlink 1
14:28:34:elinks:INFO: Disabling clock on downlink 2
14:28:34:elinks:INFO: Disabling clock on downlink 3
14:28:34:elinks:INFO: Disabling clock on downlink 4
14:28:34:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:28:34:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:28:34:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:28:34:setup_element:INFO: Scanning clock phase
14:28:34:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:28:34:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:28:35:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:28:35:setup_element:INFO: Eye window for uplink 0 : ________________________________________________________________________________
Clock Delay: 40
14:28:35:setup_element:INFO: Eye window for uplink 1 : ________________________________________________________________________________
Clock Delay: 40
14:28:35:setup_element:INFO: Eye window for uplink 2 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:28:35:setup_element:INFO: Eye window for uplink 3 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:28:35:setup_element:INFO: Eye window for uplink 4 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:28:35:setup_element:INFO: Eye window for uplink 5 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:28:35:setup_element:INFO: Eye window for uplink 6 : ________________________________________________________________________XXXXX___
Clock Delay: 34
14:28:35:setup_element:INFO: Eye window for uplink 7 : ________________________________________________________________________XXXXX___
Clock Delay: 34
14:28:35:setup_element:INFO: Eye window for uplink 8 : ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
14:28:35:setup_element:INFO: Eye window for uplink 9 : ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
14:28:35:setup_element:INFO: Eye window for uplink 10: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:28:35:setup_element:INFO: Eye window for uplink 11: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:28:35:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXX____
Clock Delay: 32
14:28:35:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXX____
Clock Delay: 32
14:28:35:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:28:35:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:28:35:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:28:35:setup_element:INFO: Scanning data phases
14:28:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:28:35:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:28:40:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:28:40:setup_element:INFO: Eye window for uplink 0 : ___________XXXXX________________________
Data delay found: 33
14:28:40:setup_element:INFO: Eye window for uplink 1 : _______XXXX_____________________________
Data delay found: 28
14:28:41:setup_element:INFO: Eye window for uplink 2 : ______XXXXX_____________________________
Data delay found: 28
14:28:41:setup_element:INFO: Eye window for uplink 3 : ____XXXXX_______________________________
Data delay found: 26
14:28:41:setup_element:INFO: Eye window for uplink 4 : ______XXXXXX____________________________
Data delay found: 28
14:28:41:setup_element:INFO: Eye window for uplink 5 : ___XXXX_________________________________
Data delay found: 24
14:28:41:setup_element:INFO: Eye window for uplink 6 : XXX___________________________________XX
Data delay found: 20
14:28:41:setup_element:INFO: Eye window for uplink 7 : __________________________________XXXXX_
Data delay found: 16
14:28:41:setup_element:INFO: Eye window for uplink 8 : ________________________XXXXX___________
Data delay found: 6
14:28:41:setup_element:INFO: Eye window for uplink 9 : _____________________________XXXXX______
Data delay found: 11
14:28:41:setup_element:INFO: Eye window for uplink 10: _____________________________XXXXX______
Data delay found: 11
14:28:41:setup_element:INFO: Eye window for uplink 11: ________________________________XXXXXX__
Data delay found: 14
14:28:41:setup_element:INFO: Eye window for uplink 12: ___________________________XXXXX________
Data delay found: 9
14:28:41:setup_element:INFO: Eye window for uplink 13: ______________________________XXXXX_____
Data delay found: 12
14:28:41:setup_element:INFO: Eye window for uplink 14: ___________________________XXXXX________
Data delay found: 9
14:28:41:setup_element:INFO: Eye window for uplink 15: _____________________________XXXXX______
Data delay found: 11
14:28:41:setup_element:INFO: Setting the data phase to 33 for uplink 0
14:28:41:setup_element:INFO: Setting the data phase to 28 for uplink 1
14:28:41:setup_element:INFO: Setting the data phase to 28 for uplink 2
14:28:41:setup_element:INFO: Setting the data phase to 26 for uplink 3
14:28:41:setup_element:INFO: Setting the data phase to 28 for uplink 4
14:28:41:setup_element:INFO: Setting the data phase to 24 for uplink 5
14:28:41:setup_element:INFO: Setting the data phase to 20 for uplink 6
14:28:41:setup_element:INFO: Setting the data phase to 16 for uplink 7
14:28:41:setup_element:INFO: Setting the data phase to 6 for uplink 8
14:28:41:setup_element:INFO: Setting the data phase to 11 for uplink 9
14:28:41:setup_element:INFO: Setting the data phase to 11 for uplink 10
14:28:41:setup_element:INFO: Setting the data phase to 14 for uplink 11
14:28:41:setup_element:INFO: Setting the data phase to 9 for uplink 12
14:28:41:setup_element:INFO: Setting the data phase to 12 for uplink 13
14:28:41:setup_element:INFO: Setting the data phase to 9 for uplink 14
14:28:41:setup_element:INFO: Setting the data phase to 11 for uplink 15
14:28:41:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 0: ________________________________________________________________________________
Uplink 1: ________________________________________________________________________________
Uplink 2: _______________________________________________________________________XXXXXXX__
Uplink 3: _______________________________________________________________________XXXXXXX__
Uplink 4: ________________________________________________________________________XXXXXXX_
Uplink 5: ________________________________________________________________________XXXXXXX_
Uplink 6: ________________________________________________________________________XXXXX___
Uplink 7: ________________________________________________________________________XXXXX___
Uplink 8: ____________________________________________________________________XXXXXXXX____
Uplink 9: ____________________________________________________________________XXXXXXXX____
Uplink 10: ______________________________________________________________________XXXXXXXXX_
Uplink 11: ______________________________________________________________________XXXXXXXXX_
Uplink 12: ______________________________________________________________________XXXXXX____
Uplink 13: ______________________________________________________________________XXXXXX____
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 1:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 5:
Optimal Phase: 24
Window Length: 36
Eye Window: ___XXXX_________________________________
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 8:
Optimal Phase: 6
Window Length: 35
Eye Window: ________________________XXXXX___________
Uplink 9:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 10:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 11:
Optimal Phase: 14
Window Length: 34
Eye Window: ________________________________XXXXXX__
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 15:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
]
14:28:41:setup_element:INFO: Beginning SMX ASICs map scan
14:28:41:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:28:41:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:28:41:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:28:41:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:28:41:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:28:41:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:28:41:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:28:41:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:28:41:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:28:41:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:28:41:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:28:41:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:28:41:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:28:41:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:28:42:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:28:42:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:28:42:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:28:42:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:28:42:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:28:42:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:28:42:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:28:43:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 0: ________________________________________________________________________________
Uplink 1: ________________________________________________________________________________
Uplink 2: _______________________________________________________________________XXXXXXX__
Uplink 3: _______________________________________________________________________XXXXXXX__
Uplink 4: ________________________________________________________________________XXXXXXX_
Uplink 5: ________________________________________________________________________XXXXXXX_
Uplink 6: ________________________________________________________________________XXXXX___
Uplink 7: ________________________________________________________________________XXXXX___
Uplink 8: ____________________________________________________________________XXXXXXXX____
Uplink 9: ____________________________________________________________________XXXXXXXX____
Uplink 10: ______________________________________________________________________XXXXXXXXX_
Uplink 11: ______________________________________________________________________XXXXXXXXX_
Uplink 12: ______________________________________________________________________XXXXXX____
Uplink 13: ______________________________________________________________________XXXXXX____
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 1:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 5:
Optimal Phase: 24
Window Length: 36
Eye Window: ___XXXX_________________________________
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 8:
Optimal Phase: 6
Window Length: 35
Eye Window: ________________________XXXXX___________
Uplink 9:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 10:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 11:
Optimal Phase: 14
Window Length: 34
Eye Window: ________________________________XXXXXX__
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 15:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
14:28:43:setup_element:INFO: Performing Elink synchronization
14:28:43:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:28:43:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:28:43:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:28:43:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:28:44:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:28:44:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:28:44:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
14:28:44:smx_tester:INFO: Scanning setup
14:28:44:elinks:INFO: Disabling clock on downlink 0
14:28:45:elinks:INFO: Disabling clock on downlink 1
14:28:45:elinks:INFO: Disabling clock on downlink 2
14:28:45:elinks:INFO: Disabling clock on downlink 3
14:28:45:elinks:INFO: Disabling clock on downlink 4
14:28:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:28:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:28:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:28:45:elinks:INFO: Disabling clock on downlink 0
14:28:45:elinks:INFO: Disabling clock on downlink 1
14:28:45:elinks:INFO: Disabling clock on downlink 2
14:28:45:elinks:INFO: Disabling clock on downlink 3
14:28:45:elinks:INFO: Disabling clock on downlink 4
14:28:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:28:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:28:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:28:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:28:45:elinks:INFO: Disabling clock on downlink 0
14:28:45:elinks:INFO: Disabling clock on downlink 1
14:28:45:elinks:INFO: Disabling clock on downlink 2
14:28:45:elinks:INFO: Disabling clock on downlink 3
14:28:45:elinks:INFO: Disabling clock on downlink 4
14:28:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:28:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:28:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:28:45:elinks:INFO: Disabling clock on downlink 0
14:28:45:elinks:INFO: Disabling clock on downlink 1
14:28:45:elinks:INFO: Disabling clock on downlink 2
14:28:45:elinks:INFO: Disabling clock on downlink 3
14:28:45:elinks:INFO: Disabling clock on downlink 4
14:28:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:28:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:28:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:28:45:elinks:INFO: Disabling clock on downlink 0
14:28:45:elinks:INFO: Disabling clock on downlink 1
14:28:45:elinks:INFO: Disabling clock on downlink 2
14:28:45:elinks:INFO: Disabling clock on downlink 3
14:28:45:elinks:INFO: Disabling clock on downlink 4
14:28:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:28:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:28:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:28:45:setup_element:INFO: Scanning clock phase
14:28:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:28:45:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:28:46:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:28:46:setup_element:INFO: Eye window for uplink 0 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:28:46:setup_element:INFO: Eye window for uplink 1 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:28:46:setup_element:INFO: Eye window for uplink 2 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:28:46:setup_element:INFO: Eye window for uplink 3 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:28:46:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:28:46:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:28:46:setup_element:INFO: Eye window for uplink 6 : ________________________________________________________________________XXXXX___
Clock Delay: 34
14:28:46:setup_element:INFO: Eye window for uplink 7 : ________________________________________________________________________XXXXX___
Clock Delay: 34
14:28:46:setup_element:INFO: Eye window for uplink 8 : ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
14:28:46:setup_element:INFO: Eye window for uplink 9 : ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
14:28:46:setup_element:INFO: Eye window for uplink 10: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:28:46:setup_element:INFO: Eye window for uplink 11: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:28:46:setup_element:INFO: Eye window for uplink 12: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:28:46:setup_element:INFO: Eye window for uplink 13: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:28:46:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:28:46:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:28:46:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:28:46:setup_element:INFO: Scanning data phases
14:28:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:28:46:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:28:51:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:28:51:setup_element:INFO: Eye window for uplink 0 : ___________XXXXX___________XXXXXXXXXXXXX
Data delay found: 5
14:28:51:setup_element:INFO: Eye window for uplink 1 : ______XXXXX________________XXXXXXXXXXXXX
Data delay found: 18
14:28:51:setup_element:INFO: Eye window for uplink 2 : ______XXXXX_____________________________
Data delay found: 28
14:28:51:setup_element:INFO: Eye window for uplink 3 : ____XXXXX_______________________________
Data delay found: 26
14:28:51:setup_element:INFO: Eye window for uplink 4 : ______XXXXX_____________________________
Data delay found: 28
14:28:51:setup_element:INFO: Eye window for uplink 5 : ___XXXX_________________________________
Data delay found: 24
14:28:51:setup_element:INFO: Eye window for uplink 6 : XXX___________________________________XX
Data delay found: 20
14:28:51:setup_element:INFO: Eye window for uplink 7 : __________________________________XXXXX_
Data delay found: 16
14:28:51:setup_element:INFO: Eye window for uplink 8 : ________________________XXXX____________
Data delay found: 5
14:28:51:setup_element:INFO: Eye window for uplink 9 : _____________________________XXXX_______
Data delay found: 10
14:28:52:setup_element:INFO: Eye window for uplink 10: _____________________________XXXXX______
Data delay found: 11
14:28:52:setup_element:INFO: Eye window for uplink 11: _________________________________XXXXX__
Data delay found: 15
14:28:52:setup_element:INFO: Eye window for uplink 12: ___________________________XXXXXX_______
Data delay found: 9
14:28:52:setup_element:INFO: Eye window for uplink 13: _______________________________XXXXX____
Data delay found: 13
14:28:52:setup_element:INFO: Eye window for uplink 14: ____________________________XXXX________
Data delay found: 9
14:28:52:setup_element:INFO: Eye window for uplink 15: _____________________________XXXXX______
Data delay found: 11
14:28:52:setup_element:INFO: Setting the data phase to 5 for uplink 0
14:28:52:setup_element:INFO: Setting the data phase to 18 for uplink 1
14:28:52:setup_element:INFO: Setting the data phase to 28 for uplink 2
14:28:52:setup_element:INFO: Setting the data phase to 26 for uplink 3
14:28:52:setup_element:INFO: Setting the data phase to 28 for uplink 4
14:28:52:setup_element:INFO: Setting the data phase to 24 for uplink 5
14:28:52:setup_element:INFO: Setting the data phase to 20 for uplink 6
14:28:52:setup_element:INFO: Setting the data phase to 16 for uplink 7
14:28:52:setup_element:INFO: Setting the data phase to 5 for uplink 8
14:28:52:setup_element:INFO: Setting the data phase to 10 for uplink 9
14:28:52:setup_element:INFO: Setting the data phase to 11 for uplink 10
14:28:52:setup_element:INFO: Setting the data phase to 15 for uplink 11
14:28:52:setup_element:INFO: Setting the data phase to 9 for uplink 12
14:28:52:setup_element:INFO: Setting the data phase to 13 for uplink 13
14:28:52:setup_element:INFO: Setting the data phase to 9 for uplink 14
14:28:52:setup_element:INFO: Setting the data phase to 11 for uplink 15
14:28:52:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: ______________________________________________________________________XXXXXXXX__
Uplink 3: ______________________________________________________________________XXXXXXXX__
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: ________________________________________________________________________XXXXX___
Uplink 7: ________________________________________________________________________XXXXX___
Uplink 8: ____________________________________________________________________XXXXXXXX____
Uplink 9: ____________________________________________________________________XXXXXXXX____
Uplink 10: ______________________________________________________________________XXXXXXXXX_
Uplink 11: ______________________________________________________________________XXXXXXXXX_
Uplink 12: _____________________________________________________________________XXXXXXXX___
Uplink 13: _____________________________________________________________________XXXXXXXX___
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 5
Window Length: 11
Eye Window: ___________XXXXX___________XXXXXXXXXXXXX
Uplink 1:
Optimal Phase: 18
Window Length: 16
Eye Window: ______XXXXX________________XXXXXXXXXXXXX
Uplink 2:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 5:
Optimal Phase: 24
Window Length: 36
Eye Window: ___XXXX_________________________________
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 8:
Optimal Phase: 5
Window Length: 36
Eye Window: ________________________XXXX____________
Uplink 9:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 10:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 11:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 12:
Optimal Phase: 9
Window Length: 34
Eye Window: ___________________________XXXXXX_______
Uplink 13:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 14:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 15:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
]
14:28:52:setup_element:INFO: Beginning SMX ASICs map scan
14:28:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:28:52:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:28:52:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:28:52:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:28:52:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:28:52:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:28:52:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:28:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:28:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:28:52:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:28:52:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:28:52:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:28:52:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:28:52:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:28:52:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:28:53:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:28:53:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:28:53:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:28:53:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:28:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:28:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:28:54:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: ______________________________________________________________________XXXXXXXX__
Uplink 3: ______________________________________________________________________XXXXXXXX__
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: ________________________________________________________________________XXXXX___
Uplink 7: ________________________________________________________________________XXXXX___
Uplink 8: ____________________________________________________________________XXXXXXXX____
Uplink 9: ____________________________________________________________________XXXXXXXX____
Uplink 10: ______________________________________________________________________XXXXXXXXX_
Uplink 11: ______________________________________________________________________XXXXXXXXX_
Uplink 12: _____________________________________________________________________XXXXXXXX___
Uplink 13: _____________________________________________________________________XXXXXXXX___
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 5
Window Length: 11
Eye Window: ___________XXXXX___________XXXXXXXXXXXXX
Uplink 1:
Optimal Phase: 18
Window Length: 16
Eye Window: ______XXXXX________________XXXXXXXXXXXXX
Uplink 2:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 5:
Optimal Phase: 24
Window Length: 36
Eye Window: ___XXXX_________________________________
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 8:
Optimal Phase: 5
Window Length: 36
Eye Window: ________________________XXXX____________
Uplink 9:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 10:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 11:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 12:
Optimal Phase: 9
Window Length: 34
Eye Window: ___________________________XXXXXX_______
Uplink 13:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 14:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 15:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
14:28:54:setup_element:INFO: Performing Elink synchronization
14:28:54:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:28:54:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:28:54:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:28:54:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:28:54:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:28:54:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:28:55:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
14:28:56:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:28:56:febtest:INFO: 01-00 | XA-000-08-002-000-004-143-02 | 34.6 | 1183.3
14:28:56:febtest:INFO: 08-01 | XA-000-08-002-000-004-150-05 | 21.9 | 1224.5
14:28:57:febtest:INFO: 03-02 | XA-000-08-002-000-004-142-02 | 25.1 | 1218.6
14:28:57:febtest:INFO: 10-03 | XA-000-08-002-000-003-081-02 | 34.6 | 1183.3
14:28:57:febtest:INFO: 05-04 | XA-000-08-002-000-003-074-05 | 47.3 | 1159.7
14:28:57:febtest:INFO: 12-05 | XA-000-08-002-000-004-140-02 | 15.6 | 1259.6
14:28:58:febtest:INFO: 07-06 | XA-000-08-002-000-004-202-07 | 31.4 | 1218.6
14:28:58:febtest:INFO: 14-07 | XA-000-08-002-000-004-144-05 | 25.1 | 1224.5
14:28:58:ST3_smx:INFO: Configuring SMX FAST
14:29:00:ST3_smx:INFO: chip: 1-0 37.726682 C 1177.390875 mV
14:29:00:ST3_smx:INFO: Electrons
14:29:00:ST3_smx:INFO: # loops 0
14:29:01:ST3_smx:INFO: # loops 1
14:29:03:ST3_smx:INFO: # loops 2
14:29:05:ST3_smx:INFO: Total # of broken channels: 2
14:29:05:ST3_smx:INFO: List of broken channels: [3, 35]
14:29:05:ST3_smx:INFO: Total # of broken channels: 4
14:29:05:ST3_smx:INFO: List of broken channels: [3, 5, 35, 43]
14:29:06:ST3_smx:INFO: Configuring SMX FAST
14:29:07:ST3_smx:INFO: chip: 8-1 28.225000 C 1206.851500 mV
14:29:07:ST3_smx:INFO: Electrons
14:29:07:ST3_smx:INFO: # loops 0
14:29:09:ST3_smx:INFO: # loops 1
14:29:11:ST3_smx:INFO: # loops 2
14:29:12:ST3_smx:INFO: Total # of broken channels: 0
14:29:12:ST3_smx:INFO: List of broken channels: []
14:29:12:ST3_smx:INFO: Total # of broken channels: 0
14:29:12:ST3_smx:INFO: List of broken channels: []
14:29:13:ST3_smx:INFO: Configuring SMX FAST
14:29:15:ST3_smx:INFO: chip: 3-2 28.225000 C 1212.728715 mV
14:29:15:ST3_smx:INFO: Electrons
14:29:15:ST3_smx:INFO: # loops 0
14:29:17:ST3_smx:INFO: # loops 1
14:29:18:ST3_smx:INFO: # loops 2
14:29:20:ST3_smx:INFO: Total # of broken channels: 0
14:29:20:ST3_smx:INFO: List of broken channels: []
14:29:20:ST3_smx:INFO: Total # of broken channels: 0
14:29:20:ST3_smx:INFO: List of broken channels: []
14:29:21:ST3_smx:INFO: Configuring SMX FAST
14:29:23:ST3_smx:INFO: chip: 10-3 34.556970 C 1195.082160 mV
14:29:23:ST3_smx:INFO: Electrons
14:29:23:ST3_smx:INFO: # loops 0
14:29:24:ST3_smx:INFO: # loops 1
14:29:26:ST3_smx:INFO: # loops 2
14:29:27:ST3_smx:INFO: Total # of broken channels: 0
14:29:27:ST3_smx:INFO: List of broken channels: []
14:29:27:ST3_smx:INFO: Total # of broken channels: 0
14:29:27:ST3_smx:INFO: List of broken channels: []
14:29:28:ST3_smx:INFO: Configuring SMX FAST
14:29:30:ST3_smx:INFO: chip: 5-4 40.898880 C 1183.292940 mV
14:29:30:ST3_smx:INFO: Electrons
14:29:30:ST3_smx:INFO: # loops 0
14:29:32:ST3_smx:INFO: # loops 1
14:29:33:ST3_smx:INFO: # loops 2
14:29:35:ST3_smx:INFO: Total # of broken channels: 0
14:29:35:ST3_smx:INFO: List of broken channels: []
14:29:35:ST3_smx:INFO: Total # of broken channels: 1
14:29:35:ST3_smx:INFO: List of broken channels: [65]
14:29:36:ST3_smx:INFO: Configuring SMX FAST
14:29:38:ST3_smx:INFO: chip: 12-5 21.902970 C 1242.040240 mV
14:29:38:ST3_smx:INFO: Electrons
14:29:38:ST3_smx:INFO: # loops 0
14:29:40:ST3_smx:INFO: # loops 1
14:29:41:ST3_smx:INFO: # loops 2
14:29:43:ST3_smx:INFO: Total # of broken channels: 1
14:29:43:ST3_smx:INFO: List of broken channels: [1]
14:29:43:ST3_smx:INFO: Total # of broken channels: 1
14:29:43:ST3_smx:INFO: List of broken channels: [1]
14:29:44:ST3_smx:INFO: Configuring SMX FAST
14:29:46:ST3_smx:INFO: chip: 7-6 31.389742 C 1218.600960 mV
14:29:46:ST3_smx:INFO: Electrons
14:29:46:ST3_smx:INFO: # loops 0
14:29:47:ST3_smx:INFO: # loops 1
14:29:49:ST3_smx:INFO: # loops 2
14:29:50:ST3_smx:INFO: Total # of broken channels: 0
14:29:50:ST3_smx:INFO: List of broken channels: []
14:29:50:ST3_smx:INFO: Total # of broken channels: 0
14:29:50:ST3_smx:INFO: List of broken channels: []
14:29:51:ST3_smx:INFO: Configuring SMX FAST
14:29:53:ST3_smx:INFO: chip: 14-7 28.225000 C 1218.600960 mV
14:29:53:ST3_smx:INFO: Electrons
14:29:53:ST3_smx:INFO: # loops 0
14:29:55:ST3_smx:INFO: # loops 1
14:29:56:ST3_smx:INFO: # loops 2
14:29:58:ST3_smx:INFO: Total # of broken channels: 0
14:29:58:ST3_smx:INFO: List of broken channels: []
14:29:58:ST3_smx:INFO: Total # of broken channels: 0
14:29:58:ST3_smx:INFO: List of broken channels: []
14:29:59:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:29:59:febtest:INFO: 01-00 | XA-000-08-002-000-004-143-02 | 37.7 | 1177.4
14:29:59:febtest:INFO: 08-01 | XA-000-08-002-000-004-150-05 | 28.2 | 1212.7
14:29:59:febtest:INFO: 03-02 | XA-000-08-002-000-004-142-02 | 31.4 | 1212.7
14:30:00:febtest:INFO: 10-03 | XA-000-08-002-000-003-081-02 | 34.6 | 1195.1
14:30:00:febtest:INFO: 05-04 | XA-000-08-002-000-003-074-05 | 40.9 | 1183.3
14:30:00:febtest:INFO: 12-05 | XA-000-08-002-000-004-140-02 | 21.9 | 1242.0
14:30:00:febtest:INFO: 07-06 | XA-000-08-002-000-004-202-07 | 31.4 | 1212.7
14:30:01:febtest:INFO: 14-07 | XA-000-08-002-000-004-144-05 | 31.4 | 1218.6
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_28_30
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1121
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.451', '1.9790', '1.850', '2.6520', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '1.9810', '1.850', '0.5899', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '1.9700', '1.850', '0.3151', '0.000', '0.0000', '0.000', '0.0000']
14:30:04:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:32:13:febtest:INFO: FEB type: 8.2
14:32:13:febtest:INFO: FEB SN: 1113
14:32:24:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:32:24:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:32:24:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:32:25:febtest:INFO: Testing FEB with SN 1113
14:32:28:smx_tester:INFO: Scanning setup
14:32:28:elinks:INFO: Disabling clock on downlink 0
14:32:28:elinks:INFO: Disabling clock on downlink 1
14:32:28:elinks:INFO: Disabling clock on downlink 2
14:32:28:elinks:INFO: Disabling clock on downlink 3
14:32:28:elinks:INFO: Disabling clock on downlink 4
14:32:28:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:32:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:32:28:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:32:28:elinks:INFO: Disabling clock on downlink 0
14:32:28:elinks:INFO: Disabling clock on downlink 1
14:32:28:elinks:INFO: Disabling clock on downlink 2
14:32:28:elinks:INFO: Disabling clock on downlink 3
14:32:28:elinks:INFO: Disabling clock on downlink 4
14:32:28:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:32:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:32:28:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:32:28:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:32:28:elinks:INFO: Disabling clock on downlink 0
14:32:28:elinks:INFO: Disabling clock on downlink 1
14:32:28:elinks:INFO: Disabling clock on downlink 2
14:32:28:elinks:INFO: Disabling clock on downlink 3
14:32:28:elinks:INFO: Disabling clock on downlink 4
14:32:28:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:32:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:32:28:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:32:28:elinks:INFO: Disabling clock on downlink 0
14:32:28:elinks:INFO: Disabling clock on downlink 1
14:32:28:elinks:INFO: Disabling clock on downlink 2
14:32:28:elinks:INFO: Disabling clock on downlink 3
14:32:28:elinks:INFO: Disabling clock on downlink 4
14:32:28:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:32:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:32:28:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:32:28:elinks:INFO: Disabling clock on downlink 0
14:32:28:elinks:INFO: Disabling clock on downlink 1
14:32:28:elinks:INFO: Disabling clock on downlink 2
14:32:28:elinks:INFO: Disabling clock on downlink 3
14:32:28:elinks:INFO: Disabling clock on downlink 4
14:32:28:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:32:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:32:28:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:32:28:setup_element:INFO: Scanning clock phase
14:32:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:32:29:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:32:29:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:32:29:setup_element:INFO: Eye window for uplink 0 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:32:29:setup_element:INFO: Eye window for uplink 1 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:32:29:setup_element:INFO: Eye window for uplink 2 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:32:29:setup_element:INFO: Eye window for uplink 3 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:32:29:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:32:29:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:32:29:setup_element:INFO: Eye window for uplink 6 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:32:29:setup_element:INFO: Eye window for uplink 7 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:32:29:setup_element:INFO: Eye window for uplink 8 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:32:29:setup_element:INFO: Eye window for uplink 9 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:32:29:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:32:29:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:32:29:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:32:29:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:32:29:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:32:29:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:32:29:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:32:29:setup_element:INFO: Scanning data phases
14:32:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:32:29:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:32:34:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:32:34:setup_element:INFO: Eye window for uplink 0 : ____________XXXXX_______________________
Data delay found: 34
14:32:35:setup_element:INFO: Eye window for uplink 1 : _______XXXXX____________________________
Data delay found: 29
14:32:35:setup_element:INFO: Eye window for uplink 2 : ______XXXXX_____________________________
Data delay found: 28
14:32:35:setup_element:INFO: Eye window for uplink 3 : ___XXXXXX_______________________________
Data delay found: 25
14:32:35:setup_element:INFO: Eye window for uplink 4 : ___XXXXXX_______________________________
Data delay found: 25
14:32:35:setup_element:INFO: Eye window for uplink 5 : XXXX__________________________________XX
Data delay found: 20
14:32:35:setup_element:INFO: Eye window for uplink 6 : XXXXX___________________________________
Data delay found: 22
14:32:35:setup_element:INFO: Eye window for uplink 7 : XX_________________________________XXXXX
Data delay found: 18
14:32:35:setup_element:INFO: Eye window for uplink 8 : ________________________XXXX____________
Data delay found: 5
14:32:35:setup_element:INFO: Eye window for uplink 9 : _____________________________XXXXX______
Data delay found: 11
14:32:35:setup_element:INFO: Eye window for uplink 10: _________________________XXXXX__________
Data delay found: 7
14:32:35:setup_element:INFO: Eye window for uplink 11: _____________________________XXXXX______
Data delay found: 11
14:32:35:setup_element:INFO: Eye window for uplink 12: ____________________________XXXX________
Data delay found: 9
14:32:35:setup_element:INFO: Eye window for uplink 13: ______________________________XXXXX_____
Data delay found: 12
14:32:35:setup_element:INFO: Eye window for uplink 14: _____________________________XXXX_______
Data delay found: 10
14:32:35:setup_element:INFO: Eye window for uplink 15: _______________________________XXXX_____
Data delay found: 12
14:32:35:setup_element:INFO: Setting the data phase to 34 for uplink 0
14:32:35:setup_element:INFO: Setting the data phase to 29 for uplink 1
14:32:35:setup_element:INFO: Setting the data phase to 28 for uplink 2
14:32:35:setup_element:INFO: Setting the data phase to 25 for uplink 3
14:32:35:setup_element:INFO: Setting the data phase to 25 for uplink 4
14:32:35:setup_element:INFO: Setting the data phase to 20 for uplink 5
14:32:35:setup_element:INFO: Setting the data phase to 22 for uplink 6
14:32:35:setup_element:INFO: Setting the data phase to 18 for uplink 7
14:32:35:setup_element:INFO: Setting the data phase to 5 for uplink 8
14:32:35:setup_element:INFO: Setting the data phase to 11 for uplink 9
14:32:35:setup_element:INFO: Setting the data phase to 7 for uplink 10
14:32:35:setup_element:INFO: Setting the data phase to 11 for uplink 11
14:32:35:setup_element:INFO: Setting the data phase to 9 for uplink 12
14:32:35:setup_element:INFO: Setting the data phase to 12 for uplink 13
14:32:35:setup_element:INFO: Setting the data phase to 10 for uplink 14
14:32:35:setup_element:INFO: Setting the data phase to 12 for uplink 15
14:32:35:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXX_
Uplink 1: ________________________________________________________________________XXXXXXX_
Uplink 2: ______________________________________________________________________XXXXXXX___
Uplink 3: ______________________________________________________________________XXXXXXX___
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _______________________________________________________________________XXXXXXX__
Uplink 7: _______________________________________________________________________XXXXXXX__
Uplink 8: ______________________________________________________________________XXXXXXX___
Uplink 9: ______________________________________________________________________XXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXXX_
Uplink 15: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 3:
Optimal Phase: 25
Window Length: 34
Eye Window: ___XXXXXX_______________________________
Uplink 4:
Optimal Phase: 25
Window Length: 34
Eye Window: ___XXXXXX_______________________________
Uplink 5:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 6:
Optimal Phase: 22
Window Length: 35
Eye Window: XXXXX___________________________________
Uplink 7:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 8:
Optimal Phase: 5
Window Length: 36
Eye Window: ________________________XXXX____________
Uplink 9:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 10:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 15:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
]
14:32:35:setup_element:INFO: Beginning SMX ASICs map scan
14:32:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:32:35:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:32:35:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:32:35:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:32:35:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:32:35:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:32:35:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:32:35:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:32:35:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:32:35:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:32:35:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:32:35:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:32:35:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:32:35:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:32:35:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:32:36:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:32:36:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:32:36:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:32:36:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:32:36:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:32:36:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:32:37:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXX_
Uplink 1: ________________________________________________________________________XXXXXXX_
Uplink 2: ______________________________________________________________________XXXXXXX___
Uplink 3: ______________________________________________________________________XXXXXXX___
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _______________________________________________________________________XXXXXXX__
Uplink 7: _______________________________________________________________________XXXXXXX__
Uplink 8: ______________________________________________________________________XXXXXXX___
Uplink 9: ______________________________________________________________________XXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXXX_
Uplink 15: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 3:
Optimal Phase: 25
Window Length: 34
Eye Window: ___XXXXXX_______________________________
Uplink 4:
Optimal Phase: 25
Window Length: 34
Eye Window: ___XXXXXX_______________________________
Uplink 5:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 6:
Optimal Phase: 22
Window Length: 35
Eye Window: XXXXX___________________________________
Uplink 7:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 8:
Optimal Phase: 5
Window Length: 36
Eye Window: ________________________XXXX____________
Uplink 9:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 10:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 15:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
14:32:37:setup_element:INFO: Performing Elink synchronization
14:32:37:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:32:37:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:32:37:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:32:37:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:32:37:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:32:37:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:32:37:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
14:32:38:smx_tester:INFO: Scanning setup
14:32:38:elinks:INFO: Disabling clock on downlink 0
14:32:38:elinks:INFO: Disabling clock on downlink 1
14:32:38:elinks:INFO: Disabling clock on downlink 2
14:32:38:elinks:INFO: Disabling clock on downlink 3
14:32:38:elinks:INFO: Disabling clock on downlink 4
14:32:38:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:32:38:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:32:38:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:32:38:elinks:INFO: Disabling clock on downlink 0
14:32:38:elinks:INFO: Disabling clock on downlink 1
14:32:38:elinks:INFO: Disabling clock on downlink 2
14:32:38:elinks:INFO: Disabling clock on downlink 3
14:32:38:elinks:INFO: Disabling clock on downlink 4
14:32:38:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:32:38:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:32:38:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:32:38:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:32:38:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:32:38:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:32:38:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:32:38:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:32:38:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:32:38:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:32:38:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:32:38:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:32:38:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:32:39:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:32:39:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:32:39:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:32:39:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:32:39:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:32:39:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:32:39:elinks:INFO: Disabling clock on downlink 0
14:32:39:elinks:INFO: Disabling clock on downlink 1
14:32:39:elinks:INFO: Disabling clock on downlink 2
14:32:39:elinks:INFO: Disabling clock on downlink 3
14:32:39:elinks:INFO: Disabling clock on downlink 4
14:32:39:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:32:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:32:39:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:32:39:elinks:INFO: Disabling clock on downlink 0
14:32:39:elinks:INFO: Disabling clock on downlink 1
14:32:39:elinks:INFO: Disabling clock on downlink 2
14:32:39:elinks:INFO: Disabling clock on downlink 3
14:32:39:elinks:INFO: Disabling clock on downlink 4
14:32:39:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:32:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:32:39:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:32:39:elinks:INFO: Disabling clock on downlink 0
14:32:39:elinks:INFO: Disabling clock on downlink 1
14:32:39:elinks:INFO: Disabling clock on downlink 2
14:32:39:elinks:INFO: Disabling clock on downlink 3
14:32:39:elinks:INFO: Disabling clock on downlink 4
14:32:39:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:32:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:32:39:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:32:39:setup_element:INFO: Scanning clock phase
14:32:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:32:39:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:32:39:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:32:39:setup_element:INFO: Eye window for uplink 0 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:32:39:setup_element:INFO: Eye window for uplink 1 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:32:39:setup_element:INFO: Eye window for uplink 2 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:32:39:setup_element:INFO: Eye window for uplink 3 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:32:39:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:32:39:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:32:39:setup_element:INFO: Eye window for uplink 6 : ________________________________________________________________________XXXXXX__
Clock Delay: 34
14:32:39:setup_element:INFO: Eye window for uplink 7 : ________________________________________________________________________XXXXXX__
Clock Delay: 34
14:32:39:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:32:39:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:32:39:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:32:39:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:32:39:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:32:39:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:32:39:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:32:39:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:32:39:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:32:39:setup_element:INFO: Scanning data phases
14:32:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:32:39:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:32:44:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:32:44:setup_element:INFO: Eye window for uplink 0 : ___________XXXXXX_______________________
Data delay found: 33
14:32:44:setup_element:INFO: Eye window for uplink 1 : _______XXXXX____________________________
Data delay found: 29
14:32:44:setup_element:INFO: Eye window for uplink 2 : ______XXXXX_____________________________
Data delay found: 28
14:32:44:setup_element:INFO: Eye window for uplink 3 : ___XXXXX________________________________
Data delay found: 25
14:32:44:setup_element:INFO: Eye window for uplink 4 : ___XXXXX________________________________
Data delay found: 25
14:32:44:setup_element:INFO: Eye window for uplink 5 : XXXX__________________________________XX
Data delay found: 20
14:32:44:setup_element:INFO: Eye window for uplink 6 : XXXX___________________________________X
Data delay found: 21
14:32:44:setup_element:INFO: Eye window for uplink 7 : X__________________________________XXXXX
Data delay found: 17
14:32:44:setup_element:INFO: Eye window for uplink 8 : ________________________XXXX____________
Data delay found: 5
14:32:44:setup_element:INFO: Eye window for uplink 9 : _____________________________XXXXX______
Data delay found: 11
14:32:44:setup_element:INFO: Eye window for uplink 10: _________________________XXXXX__________
Data delay found: 7
14:32:44:setup_element:INFO: Eye window for uplink 11: _____________________________XXXXX______
Data delay found: 11
14:32:44:setup_element:INFO: Eye window for uplink 12: ____________________________XXXX________
Data delay found: 9
14:32:44:setup_element:INFO: Eye window for uplink 13: ______________________________XXXXX_____
Data delay found: 12
14:32:44:setup_element:INFO: Eye window for uplink 14: ____________________________XXXXX_______
Data delay found: 10
14:32:44:setup_element:INFO: Eye window for uplink 15: ______________________________XXXXX_____
Data delay found: 12
14:32:44:setup_element:INFO: Setting the data phase to 33 for uplink 0
14:32:44:setup_element:INFO: Setting the data phase to 29 for uplink 1
14:32:44:setup_element:INFO: Setting the data phase to 28 for uplink 2
14:32:44:setup_element:INFO: Setting the data phase to 25 for uplink 3
14:32:44:setup_element:INFO: Setting the data phase to 25 for uplink 4
14:32:44:setup_element:INFO: Setting the data phase to 20 for uplink 5
14:32:44:setup_element:INFO: Setting the data phase to 21 for uplink 6
14:32:44:setup_element:INFO: Setting the data phase to 17 for uplink 7
14:32:44:setup_element:INFO: Setting the data phase to 5 for uplink 8
14:32:44:setup_element:INFO: Setting the data phase to 11 for uplink 9
14:32:44:setup_element:INFO: Setting the data phase to 7 for uplink 10
14:32:44:setup_element:INFO: Setting the data phase to 11 for uplink 11
14:32:44:setup_element:INFO: Setting the data phase to 9 for uplink 12
14:32:44:setup_element:INFO: Setting the data phase to 12 for uplink 13
14:32:44:setup_element:INFO: Setting the data phase to 10 for uplink 14
14:32:44:setup_element:INFO: Setting the data phase to 12 for uplink 15
14:32:44:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXXX_
Uplink 1: _______________________________________________________________________XXXXXXXX_
Uplink 2: _______________________________________________________________________XXXXXX___
Uplink 3: _______________________________________________________________________XXXXXX___
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: ________________________________________________________________________XXXXXX__
Uplink 7: ________________________________________________________________________XXXXXX__
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXXX_
Uplink 15: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 3:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 4:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 5:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 6:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 7:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 8:
Optimal Phase: 5
Window Length: 36
Eye Window: ________________________XXXX____________
Uplink 9:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 10:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 15:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
]
14:32:44:setup_element:INFO: Beginning SMX ASICs map scan
14:32:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:32:44:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:32:44:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:32:44:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:32:44:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:32:44:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:32:44:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:32:45:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:32:45:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:32:45:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:32:45:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:32:45:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:32:45:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:32:45:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:32:45:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:32:45:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:32:45:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:32:45:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:32:45:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:32:46:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:32:46:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:32:47:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXXX_
Uplink 1: _______________________________________________________________________XXXXXXXX_
Uplink 2: _______________________________________________________________________XXXXXX___
Uplink 3: _______________________________________________________________________XXXXXX___
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: ________________________________________________________________________XXXXXX__
Uplink 7: ________________________________________________________________________XXXXXX__
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXXX_
Uplink 15: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 3:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 4:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 5:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 6:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 7:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 8:
Optimal Phase: 5
Window Length: 36
Eye Window: ________________________XXXX____________
Uplink 9:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 10:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 15:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
14:32:47:setup_element:INFO: Performing Elink synchronization
14:32:47:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:32:47:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:32:47:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:32:47:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:32:47:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:32:47:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:32:47:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
14:32:48:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:32:49:febtest:INFO: 01-00 | XA-000-08-002-000-000-235-15 | 40.9 | 1171.5
14:32:49:febtest:INFO: 08-01 | XA-000-08-002-000-004-195-07 | 28.2 | 1212.7
14:32:49:febtest:INFO: 03-02 | XA-000-08-002-000-000-230-15 | 47.3 | 1165.6
14:32:49:febtest:INFO: 10-03 | XA-000-08-002-000-004-200-07 | 31.4 | 1212.7
14:32:49:febtest:INFO: 05-04 | XA-000-08-002-000-000-223-06 | 37.7 | 1206.9
14:32:50:febtest:INFO: 12-05 | XA-000-08-002-000-004-199-07 | 40.9 | 1177.4
14:32:50:febtest:INFO: 07-06 | XA-000-08-002-000-000-234-15 | 44.1 | 1177.4
14:32:50:febtest:INFO: 14-07 | XA-000-08-002-000-004-198-07 | 28.2 | 1224.5
14:32:50:ST3_smx:INFO: Configuring SMX FAST
14:32:52:ST3_smx:INFO: chip: 1-0 47.250730 C 1147.806000 mV
14:32:52:ST3_smx:INFO: Electrons
14:32:52:ST3_smx:INFO: # loops 0
14:32:54:ST3_smx:INFO: # loops 1
14:32:55:ST3_smx:INFO: # loops 2
14:32:57:ST3_smx:INFO: Total # of broken channels: 0
14:32:57:ST3_smx:INFO: List of broken channels: []
14:32:57:ST3_smx:INFO: Total # of broken channels: 0
14:32:57:ST3_smx:INFO: List of broken channels: []
14:32:58:ST3_smx:INFO: Configuring SMX FAST
14:33:00:ST3_smx:INFO: chip: 8-1 40.898880 C 1183.292940 mV
14:33:00:ST3_smx:INFO: Electrons
14:33:00:ST3_smx:INFO: # loops 0
14:33:02:ST3_smx:INFO: # loops 1
14:33:03:ST3_smx:INFO: # loops 2
14:33:05:ST3_smx:INFO: Total # of broken channels: 0
14:33:05:ST3_smx:INFO: List of broken channels: []
14:33:05:ST3_smx:INFO: Total # of broken channels: 1
14:33:05:ST3_smx:INFO: List of broken channels: [125]
14:33:06:ST3_smx:INFO: Configuring SMX FAST
14:33:08:ST3_smx:INFO: chip: 3-2 44.073563 C 1177.390875 mV
14:33:08:ST3_smx:INFO: Electrons
14:33:08:ST3_smx:INFO: # loops 0
14:33:10:ST3_smx:INFO: # loops 1
14:33:12:ST3_smx:INFO: # loops 2
14:33:13:ST3_smx:INFO: Total # of broken channels: 0
14:33:13:ST3_smx:INFO: List of broken channels: []
14:33:13:ST3_smx:INFO: Total # of broken channels: 0
14:33:13:ST3_smx:INFO: List of broken channels: []
14:33:14:ST3_smx:INFO: Configuring SMX FAST
14:33:16:ST3_smx:INFO: chip: 10-3 28.225000 C 1236.187875 mV
14:33:16:ST3_smx:INFO: Electrons
14:33:16:ST3_smx:INFO: # loops 0
14:33:18:ST3_smx:INFO: # loops 1
14:33:20:ST3_smx:INFO: # loops 2
14:33:21:ST3_smx:INFO: Total # of broken channels: 0
14:33:21:ST3_smx:INFO: List of broken channels: []
14:33:21:ST3_smx:INFO: Total # of broken channels: 0
14:33:21:ST3_smx:INFO: List of broken channels: []
14:33:22:ST3_smx:INFO: Configuring SMX FAST
14:33:24:ST3_smx:INFO: chip: 5-4 44.073563 C 1195.082160 mV
14:33:24:ST3_smx:INFO: Electrons
14:33:24:ST3_smx:INFO: # loops 0
14:33:26:ST3_smx:INFO: # loops 1
14:33:27:ST3_smx:INFO: # loops 2
14:33:29:ST3_smx:INFO: Total # of broken channels: 0
14:33:29:ST3_smx:INFO: List of broken channels: []
14:33:29:ST3_smx:INFO: Total # of broken channels: 0
14:33:29:ST3_smx:INFO: List of broken channels: []
14:33:30:ST3_smx:INFO: Configuring SMX FAST
14:33:32:ST3_smx:INFO: chip: 12-5 40.898880 C 1177.390875 mV
14:33:32:ST3_smx:INFO: Electrons
14:33:32:ST3_smx:INFO: # loops 0
14:33:34:ST3_smx:INFO: # loops 1
14:33:35:ST3_smx:INFO: # loops 2
14:33:37:ST3_smx:INFO: Total # of broken channels: 0
14:33:37:ST3_smx:INFO: List of broken channels: []
14:33:37:ST3_smx:INFO: Total # of broken channels: 0
14:33:37:ST3_smx:INFO: List of broken channels: []
14:33:38:ST3_smx:INFO: Configuring SMX FAST
14:33:40:ST3_smx:INFO: chip: 7-6 47.250730 C 1171.483840 mV
14:33:40:ST3_smx:INFO: Electrons
14:33:40:ST3_smx:INFO: # loops 0
14:33:42:ST3_smx:INFO: # loops 1
14:33:43:ST3_smx:INFO: # loops 2
14:33:45:ST3_smx:INFO: Total # of broken channels: 0
14:33:45:ST3_smx:INFO: List of broken channels: []
14:33:45:ST3_smx:INFO: Total # of broken channels: 0
14:33:45:ST3_smx:INFO: List of broken channels: []
14:33:46:ST3_smx:INFO: Configuring SMX FAST
14:33:48:ST3_smx:INFO: chip: 14-7 40.898880 C 1189.190035 mV
14:33:48:ST3_smx:INFO: Electrons
14:33:48:ST3_smx:INFO: # loops 0
14:33:49:ST3_smx:INFO: # loops 1
14:33:51:ST3_smx:INFO: # loops 2
14:33:53:ST3_smx:INFO: Total # of broken channels: 0
14:33:53:ST3_smx:INFO: List of broken channels: []
14:33:53:ST3_smx:INFO: Total # of broken channels: 2
14:33:53:ST3_smx:INFO: List of broken channels: [1, 3]
14:33:54:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:33:54:febtest:INFO: 01-00 | XA-000-08-002-000-000-235-15 | 47.3 | 1153.7
14:33:54:febtest:INFO: 08-01 | XA-000-08-002-000-004-195-07 | 40.9 | 1183.3
14:33:54:febtest:INFO: 03-02 | XA-000-08-002-000-000-230-15 | 47.3 | 1183.3
14:33:55:febtest:INFO: 10-03 | XA-000-08-002-000-004-200-07 | 28.2 | 1230.3
14:33:55:febtest:INFO: 05-04 | XA-000-08-002-000-000-223-06 | 44.1 | 1189.2
14:33:55:febtest:INFO: 12-05 | XA-000-08-002-000-004-199-07 | 40.9 | 1177.4
14:33:55:febtest:INFO: 07-06 | XA-000-08-002-000-000-234-15 | 47.3 | 1171.5
14:33:55:febtest:INFO: 14-07 | XA-000-08-002-000-004-198-07 | 40.9 | 1189.2
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_32_24
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1113
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.451', '1.9510', '1.850', '2.6350', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '1.9940', '1.850', '0.5552', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '1.9840', '1.850', '0.3170', '0.000', '0.0000', '0.000', '0.0000']
14:33:59:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:35:46:febtest:INFO: FEB type: 8.2
14:35:46:febtest:INFO: FEB SN: 1115
14:36:04:ST3_Shared:INFO: Listo of operators:Olga B.; Oleksandr S.;
14:36:08:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:36:08:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:36:08:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:36:08:febtest:INFO: Testing FEB with SN 1115
14:36:11:smx_tester:INFO: Scanning setup
14:36:11:elinks:INFO: Disabling clock on downlink 0
14:36:11:elinks:INFO: Disabling clock on downlink 1
14:36:11:elinks:INFO: Disabling clock on downlink 2
14:36:11:elinks:INFO: Disabling clock on downlink 3
14:36:11:elinks:INFO: Disabling clock on downlink 4
14:36:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:36:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:11:elinks:INFO: Disabling clock on downlink 0
14:36:11:elinks:INFO: Disabling clock on downlink 1
14:36:11:elinks:INFO: Disabling clock on downlink 2
14:36:11:elinks:INFO: Disabling clock on downlink 3
14:36:11:elinks:INFO: Disabling clock on downlink 4
14:36:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:36:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:36:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:11:elinks:INFO: Disabling clock on downlink 0
14:36:11:elinks:INFO: Disabling clock on downlink 1
14:36:11:elinks:INFO: Disabling clock on downlink 2
14:36:11:elinks:INFO: Disabling clock on downlink 3
14:36:11:elinks:INFO: Disabling clock on downlink 4
14:36:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:11:elinks:INFO: Disabling clock on downlink 0
14:36:11:elinks:INFO: Disabling clock on downlink 1
14:36:11:elinks:INFO: Disabling clock on downlink 2
14:36:11:elinks:INFO: Disabling clock on downlink 3
14:36:11:elinks:INFO: Disabling clock on downlink 4
14:36:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:36:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:12:elinks:INFO: Disabling clock on downlink 0
14:36:12:elinks:INFO: Disabling clock on downlink 1
14:36:12:elinks:INFO: Disabling clock on downlink 2
14:36:12:elinks:INFO: Disabling clock on downlink 3
14:36:12:elinks:INFO: Disabling clock on downlink 4
14:36:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:36:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:12:setup_element:INFO: Scanning clock phase
14:36:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:12:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:36:12:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:36:12:setup_element:INFO: Eye window for uplink 0 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:36:12:setup_element:INFO: Eye window for uplink 1 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:36:12:setup_element:INFO: Eye window for uplink 2 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:36:12:setup_element:INFO: Eye window for uplink 3 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:36:12:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:36:12:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:36:12:setup_element:INFO: Eye window for uplink 6 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:36:12:setup_element:INFO: Eye window for uplink 7 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:36:12:setup_element:INFO: Eye window for uplink 8 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:36:12:setup_element:INFO: Eye window for uplink 9 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:36:12:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:36:12:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:36:12:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:36:12:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:36:12:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:36:12:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:36:12:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 1
14:36:12:setup_element:INFO: Scanning data phases
14:36:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:12:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:36:18:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:36:18:setup_element:INFO: Eye window for uplink 0 : ____________XXXXX_______________________
Data delay found: 34
14:36:18:setup_element:INFO: Eye window for uplink 1 : _______XXXXXX___________________________
Data delay found: 29
14:36:18:setup_element:INFO: Eye window for uplink 2 : ________XXXXX___________________________
Data delay found: 30
14:36:18:setup_element:INFO: Eye window for uplink 3 : _____XXXXXX_____________________________
Data delay found: 27
14:36:18:setup_element:INFO: Eye window for uplink 4 : ___XXXXX________________________________
Data delay found: 25
14:36:18:setup_element:INFO: Eye window for uplink 5 : XXXX__________________________________XX
Data delay found: 20
14:36:18:setup_element:INFO: Eye window for uplink 6 : __________________________________XXXX__
Data delay found: 15
14:36:18:setup_element:INFO: Eye window for uplink 7 : ______________________________XXXXX_____
Data delay found: 12
14:36:18:setup_element:INFO: Eye window for uplink 8 : __________________________XXXX__________
Data delay found: 7
14:36:18:setup_element:INFO: Eye window for uplink 9 : ______________________________XXXXX_____
Data delay found: 12
14:36:18:setup_element:INFO: Eye window for uplink 10: _________________________XXXXXX_________
Data delay found: 7
14:36:18:setup_element:INFO: Eye window for uplink 11: _____________________________XXXXX______
Data delay found: 11
14:36:18:setup_element:INFO: Eye window for uplink 12: ___________________________XXXXX________
Data delay found: 9
14:36:18:setup_element:INFO: Eye window for uplink 13: ______________________________XXXX______
Data delay found: 11
14:36:18:setup_element:INFO: Eye window for uplink 14: ___________________________XXXX_________
Data delay found: 8
14:36:18:setup_element:INFO: Eye window for uplink 15: ____________________________XXXXX_______
Data delay found: 10
14:36:18:setup_element:INFO: Setting the data phase to 34 for uplink 0
14:36:18:setup_element:INFO: Setting the data phase to 29 for uplink 1
14:36:18:setup_element:INFO: Setting the data phase to 30 for uplink 2
14:36:18:setup_element:INFO: Setting the data phase to 27 for uplink 3
14:36:18:setup_element:INFO: Setting the data phase to 25 for uplink 4
14:36:18:setup_element:INFO: Setting the data phase to 20 for uplink 5
14:36:18:setup_element:INFO: Setting the data phase to 15 for uplink 6
14:36:18:setup_element:INFO: Setting the data phase to 12 for uplink 7
14:36:18:setup_element:INFO: Setting the data phase to 7 for uplink 8
14:36:18:setup_element:INFO: Setting the data phase to 12 for uplink 9
14:36:18:setup_element:INFO: Setting the data phase to 7 for uplink 10
14:36:18:setup_element:INFO: Setting the data phase to 11 for uplink 11
14:36:18:setup_element:INFO: Setting the data phase to 9 for uplink 12
14:36:18:setup_element:INFO: Setting the data phase to 11 for uplink 13
14:36:18:setup_element:INFO: Setting the data phase to 8 for uplink 14
14:36:18:setup_element:INFO: Setting the data phase to 10 for uplink 15
14:36:18:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXXX
Uplink 1: ________________________________________________________________________XXXXXXXX
Uplink 2: ________________________________________________________________________XXXXXXXX
Uplink 3: ________________________________________________________________________XXXXXXXX
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _____________________________________________________________________XXXXXXX____
Uplink 7: _____________________________________________________________________XXXXXXX____
Uplink 8: ______________________________________________________________________XXXXXXXX__
Uplink 9: ______________________________________________________________________XXXXXXXX__
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 2:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 3:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 4:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 5:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 6:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 7:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 8:
Optimal Phase: 7
Window Length: 36
Eye Window: __________________________XXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 34
Eye Window: _________________________XXXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 14:
Optimal Phase: 8
Window Length: 36
Eye Window: ___________________________XXXX_________
Uplink 15:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
]
14:36:18:setup_element:INFO: Beginning SMX ASICs map scan
14:36:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:18:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:36:18:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:36:18:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:36:18:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:36:18:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:36:18:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:36:18:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:36:18:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:36:18:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:36:18:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:36:18:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:36:19:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:36:19:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:36:19:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:36:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:36:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:36:19:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:36:19:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:36:19:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:36:19:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:36:21:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXXX
Uplink 1: ________________________________________________________________________XXXXXXXX
Uplink 2: ________________________________________________________________________XXXXXXXX
Uplink 3: ________________________________________________________________________XXXXXXXX
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _____________________________________________________________________XXXXXXX____
Uplink 7: _____________________________________________________________________XXXXXXX____
Uplink 8: ______________________________________________________________________XXXXXXXX__
Uplink 9: ______________________________________________________________________XXXXXXXX__
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 2:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 3:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 4:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 5:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 6:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 7:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 8:
Optimal Phase: 7
Window Length: 36
Eye Window: __________________________XXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 34
Eye Window: _________________________XXXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 14:
Optimal Phase: 8
Window Length: 36
Eye Window: ___________________________XXXX_________
Uplink 15:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
14:36:21:setup_element:INFO: Performing Elink synchronization
14:36:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:21:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:36:21:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:36:21:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:36:21:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:36:21:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:36:21:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
14:36:22:smx_tester:INFO: Scanning setup
14:36:22:elinks:INFO: Disabling clock on downlink 0
14:36:22:elinks:INFO: Disabling clock on downlink 1
14:36:22:elinks:INFO: Disabling clock on downlink 2
14:36:22:elinks:INFO: Disabling clock on downlink 3
14:36:22:elinks:INFO: Disabling clock on downlink 4
14:36:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:36:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:22:elinks:INFO: Disabling clock on downlink 0
14:36:22:elinks:INFO: Disabling clock on downlink 1
14:36:22:elinks:INFO: Disabling clock on downlink 2
14:36:22:elinks:INFO: Disabling clock on downlink 3
14:36:22:elinks:INFO: Disabling clock on downlink 4
14:36:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:36:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:36:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:22:elinks:INFO: Disabling clock on downlink 0
14:36:22:elinks:INFO: Disabling clock on downlink 1
14:36:22:elinks:INFO: Disabling clock on downlink 2
14:36:22:elinks:INFO: Disabling clock on downlink 3
14:36:22:elinks:INFO: Disabling clock on downlink 4
14:36:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:22:elinks:INFO: Disabling clock on downlink 0
14:36:22:elinks:INFO: Disabling clock on downlink 1
14:36:22:elinks:INFO: Disabling clock on downlink 2
14:36:22:elinks:INFO: Disabling clock on downlink 3
14:36:22:elinks:INFO: Disabling clock on downlink 4
14:36:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:36:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:22:elinks:INFO: Disabling clock on downlink 0
14:36:22:elinks:INFO: Disabling clock on downlink 1
14:36:22:elinks:INFO: Disabling clock on downlink 2
14:36:22:elinks:INFO: Disabling clock on downlink 3
14:36:22:elinks:INFO: Disabling clock on downlink 4
14:36:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:36:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:22:setup_element:INFO: Scanning clock phase
14:36:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:36:23:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:36:23:setup_element:INFO: Eye window for uplink 0 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:36:23:setup_element:INFO: Eye window for uplink 1 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:36:23:setup_element:INFO: Eye window for uplink 2 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:36:23:setup_element:INFO: Eye window for uplink 3 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:36:23:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:36:23:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:36:23:setup_element:INFO: Eye window for uplink 6 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:36:23:setup_element:INFO: Eye window for uplink 7 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:36:23:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:36:23:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:36:23:setup_element:INFO: Eye window for uplink 10: ________________________________________________________________________________
Clock Delay: 40
14:36:23:setup_element:INFO: Eye window for uplink 11: ________________________________________________________________________________
Clock Delay: 40
14:36:23:setup_element:INFO: Eye window for uplink 12: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:36:23:setup_element:INFO: Eye window for uplink 13: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:36:23:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:36:23:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:36:23:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 1
14:36:23:setup_element:INFO: Scanning data phases
14:36:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:36:29:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:36:29:setup_element:INFO: Eye window for uplink 0 : ____________XXXXXX______________________
Data delay found: 34
14:36:29:setup_element:INFO: Eye window for uplink 1 : _______XXXXXX___________________________
Data delay found: 29
14:36:29:setup_element:INFO: Eye window for uplink 2 : ________XXXXX___________________________
Data delay found: 30
14:36:29:setup_element:INFO: Eye window for uplink 3 : _____XXXXXX_____________________________
Data delay found: 27
14:36:29:setup_element:INFO: Eye window for uplink 4 : __XXXXXX________________________________
Data delay found: 24
14:36:29:setup_element:INFO: Eye window for uplink 5 : XXXX__________________________________XX
Data delay found: 20
14:36:29:setup_element:INFO: Eye window for uplink 6 : __________________________________XXXX__
Data delay found: 15
14:36:29:setup_element:INFO: Eye window for uplink 7 : ______________________________XXXXX_____
Data delay found: 12
14:36:29:setup_element:INFO: Eye window for uplink 8 : _________________________XXXXX__________
Data delay found: 7
14:36:29:setup_element:INFO: Eye window for uplink 9 : ______________________________XXXXX_____
Data delay found: 12
14:36:29:setup_element:INFO: Eye window for uplink 10: _________________________XXXXXX_________
Data delay found: 7
14:36:29:setup_element:INFO: Eye window for uplink 11: _____________________________XXXXX______
Data delay found: 11
14:36:29:setup_element:INFO: Eye window for uplink 12: ___________________________XXXXX________
Data delay found: 9
14:36:29:setup_element:INFO: Eye window for uplink 13: _____________________________XXXXX______
Data delay found: 11
14:36:29:setup_element:INFO: Eye window for uplink 14: __________________________XXXXX_________
Data delay found: 8
14:36:29:setup_element:INFO: Eye window for uplink 15: ____________________________XXXXX_______
Data delay found: 10
14:36:29:setup_element:INFO: Setting the data phase to 34 for uplink 0
14:36:29:setup_element:INFO: Setting the data phase to 29 for uplink 1
14:36:29:setup_element:INFO: Setting the data phase to 30 for uplink 2
14:36:29:setup_element:INFO: Setting the data phase to 27 for uplink 3
14:36:29:setup_element:INFO: Setting the data phase to 24 for uplink 4
14:36:29:setup_element:INFO: Setting the data phase to 20 for uplink 5
14:36:29:setup_element:INFO: Setting the data phase to 15 for uplink 6
14:36:29:setup_element:INFO: Setting the data phase to 12 for uplink 7
14:36:29:setup_element:INFO: Setting the data phase to 7 for uplink 8
14:36:29:setup_element:INFO: Setting the data phase to 12 for uplink 9
14:36:29:setup_element:INFO: Setting the data phase to 7 for uplink 10
14:36:29:setup_element:INFO: Setting the data phase to 11 for uplink 11
14:36:29:setup_element:INFO: Setting the data phase to 9 for uplink 12
14:36:29:setup_element:INFO: Setting the data phase to 11 for uplink 13
14:36:29:setup_element:INFO: Setting the data phase to 8 for uplink 14
14:36:29:setup_element:INFO: Setting the data phase to 10 for uplink 15
14:36:29:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXXX
Uplink 1: ________________________________________________________________________XXXXXXXX
Uplink 2: ________________________________________________________________________XXXXXXX_
Uplink 3: ________________________________________________________________________XXXXXXX_
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _____________________________________________________________________XXXXXXX____
Uplink 7: _____________________________________________________________________XXXXXXX____
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ________________________________________________________________________________
Uplink 11: ________________________________________________________________________________
Uplink 12: _____________________________________________________________________XXXXXXXXX__
Uplink 13: _____________________________________________________________________XXXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXX___
Uplink 15: _______________________________________________________________________XXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 1:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 2:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 3:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 4:
Optimal Phase: 24
Window Length: 34
Eye Window: __XXXXXX________________________________
Uplink 5:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 6:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 7:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 8:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 34
Eye Window: _________________________XXXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 14:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 15:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
]
14:36:29:setup_element:INFO: Beginning SMX ASICs map scan
14:36:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:29:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:36:29:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:36:29:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:36:29:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:36:29:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:36:29:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:36:29:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:36:29:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:36:29:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:36:29:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:36:29:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:36:29:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:36:29:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:36:30:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:36:30:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:36:30:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:36:30:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:36:30:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:36:30:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:36:30:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:36:31:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXXX
Uplink 1: ________________________________________________________________________XXXXXXXX
Uplink 2: ________________________________________________________________________XXXXXXX_
Uplink 3: ________________________________________________________________________XXXXXXX_
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _____________________________________________________________________XXXXXXX____
Uplink 7: _____________________________________________________________________XXXXXXX____
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ________________________________________________________________________________
Uplink 11: ________________________________________________________________________________
Uplink 12: _____________________________________________________________________XXXXXXXXX__
Uplink 13: _____________________________________________________________________XXXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXX___
Uplink 15: _______________________________________________________________________XXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 1:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 2:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 3:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 4:
Optimal Phase: 24
Window Length: 34
Eye Window: __XXXXXX________________________________
Uplink 5:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 6:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 7:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 8:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 34
Eye Window: _________________________XXXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 14:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 15:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
14:36:31:setup_element:INFO: Performing Elink synchronization
14:36:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:31:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:36:31:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:36:31:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:36:31:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:36:31:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:36:32:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
14:36:33:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:36:33:febtest:INFO: 01-00 | XA-000-08-002-000-000-224-15 | 53.6 | 1130.0
14:36:34:febtest:INFO: 08-01 | XA-000-08-002-000-004-206-07 | 21.9 | 1247.9
14:36:34:febtest:INFO: 03-02 | XA-000-08-002-000-000-225-15 | 44.1 | 1165.6
14:36:34:febtest:INFO: 10-03 | XA-000-08-002-000-004-205-07 | 25.1 | 1236.2
14:36:34:febtest:INFO: 05-04 | XA-000-08-002-000-000-238-15 | 50.4 | 1147.8
14:36:34:febtest:INFO: 12-05 | XA-000-08-002-000-004-197-07 | 47.3 | 1165.6
14:36:35:febtest:INFO: 07-06 | XA-000-08-002-000-000-240-08 | 37.7 | 1201.0
14:36:35:febtest:INFO: 14-07 | XA-000-08-002-000-004-196-07 | 31.4 | 1212.7
14:36:35:ST3_smx:INFO: Configuring SMX FAST
14:36:37:ST3_smx:INFO: chip: 1-0 53.612520 C 1129.995435 mV
14:36:37:ST3_smx:INFO: Electrons
14:36:37:ST3_smx:INFO: # loops 0
14:36:38:ST3_smx:INFO: # loops 1
14:36:40:ST3_smx:INFO: # loops 2
14:36:42:ST3_smx:INFO: Total # of broken channels: 10
14:36:42:ST3_smx:INFO: List of broken channels: [7, 9, 11, 13, 15, 17, 19, 21, 25, 27]
14:36:42:ST3_smx:INFO: Total # of broken channels: 62
14:36:42:ST3_smx:INFO: List of broken channels: [3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 91, 93, 95, 97, 99, 101, 103, 105, 107, 109, 111, 113, 115, 117, 119, 121, 123, 125]
14:36:43:ST3_smx:INFO: Configuring SMX FAST
14:36:44:ST3_smx:INFO: chip: 8-1 31.389742 C 1206.851500 mV
14:36:44:ST3_smx:INFO: Electrons
14:36:45:ST3_smx:INFO: # loops 0
14:36:46:ST3_smx:INFO: # loops 1
14:36:48:ST3_smx:INFO: # loops 2
14:36:49:ST3_smx:INFO: Total # of broken channels: 3
14:36:49:ST3_smx:INFO: List of broken channels: [3, 5, 7]
14:36:49:ST3_smx:INFO: Total # of broken channels: 17
14:36:49:ST3_smx:INFO: List of broken channels: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33]
14:36:50:ST3_smx:INFO: Configuring SMX FAST
14:36:52:ST3_smx:INFO: chip: 3-2 50.430383 C 1153.732915 mV
14:36:52:ST3_smx:INFO: Electrons
14:36:52:ST3_smx:INFO: # loops 0
14:36:54:ST3_smx:INFO: # loops 1
14:36:55:ST3_smx:INFO: # loops 2
14:36:57:ST3_smx:INFO: Total # of broken channels: 0
14:36:57:ST3_smx:INFO: List of broken channels: []
14:36:57:ST3_smx:INFO: Total # of broken channels: 12
14:36:57:ST3_smx:INFO: List of broken channels: [98, 102, 104, 106, 108, 110, 112, 114, 116, 118, 120, 122]
14:36:58:ST3_smx:INFO: Configuring SMX FAST
14:37:00:ST3_smx:INFO: chip: 10-3 31.389742 C 1218.600960 mV
14:37:00:ST3_smx:INFO: Electrons
14:37:00:ST3_smx:INFO: # loops 0
14:37:01:ST3_smx:INFO: # loops 1
14:37:03:ST3_smx:INFO: # loops 2
14:37:05:ST3_smx:INFO: Total # of broken channels: 8
14:37:05:ST3_smx:INFO: List of broken channels: [5, 7, 9, 11, 13, 15, 17, 19]
14:37:05:ST3_smx:INFO: Total # of broken channels: 62
14:37:05:ST3_smx:INFO: List of broken channels: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 91, 93, 95, 97, 99, 101, 103, 105, 107, 109, 111, 113, 115, 117, 119, 121, 123]
14:37:06:ST3_smx:INFO: Configuring SMX FAST
14:37:07:ST3_smx:INFO: chip: 5-4 50.430383 C 1153.732915 mV
14:37:07:ST3_smx:INFO: Electrons
14:37:08:ST3_smx:INFO: # loops 0
14:37:09:ST3_smx:INFO: # loops 1
14:37:11:ST3_smx:INFO: # loops 2
14:37:12:ST3_smx:INFO: Total # of broken channels: 0
14:37:12:ST3_smx:INFO: List of broken channels: []
14:37:12:ST3_smx:INFO: Total # of broken channels: 29
14:37:12:ST3_smx:INFO: List of broken channels: [3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 63, 65, 67]
14:37:13:ST3_smx:INFO: Configuring SMX FAST
14:37:15:ST3_smx:INFO: chip: 12-5 40.898880 C 1195.082160 mV
14:37:15:ST3_smx:INFO: Electrons
14:37:15:ST3_smx:INFO: # loops 0
14:37:17:ST3_smx:INFO: # loops 1
14:37:18:ST3_smx:INFO: # loops 2
14:37:20:ST3_smx:INFO: Total # of broken channels: 0
14:37:20:ST3_smx:INFO: List of broken channels: []
14:37:20:ST3_smx:INFO: Total # of broken channels: 20
14:37:20:ST3_smx:INFO: List of broken channels: [33, 35, 37, 39, 41, 43, 51, 59, 65, 67, 73, 75, 77, 81, 83, 85, 87, 89, 91, 93]
14:37:21:ST3_smx:INFO: Configuring SMX FAST
14:37:23:ST3_smx:INFO: chip: 7-6 44.073563 C 1189.190035 mV
14:37:23:ST3_smx:INFO: Electrons
14:37:23:ST3_smx:INFO: # loops 0
14:37:25:ST3_smx:INFO: # loops 1
14:37:26:ST3_smx:INFO: # loops 2
14:37:28:ST3_smx:INFO: Total # of broken channels: 0
14:37:28:ST3_smx:INFO: List of broken channels: []
14:37:28:ST3_smx:INFO: Total # of broken channels: 1
14:37:28:ST3_smx:INFO: List of broken channels: [95]
14:37:29:ST3_smx:INFO: Configuring SMX FAST
14:37:31:ST3_smx:INFO: chip: 14-7 37.726682 C 1195.082160 mV
14:37:31:ST3_smx:INFO: Electrons
14:37:31:ST3_smx:INFO: # loops 0
14:37:33:ST3_smx:INFO: # loops 1
14:37:34:ST3_smx:INFO: # loops 2
14:37:36:ST3_smx:INFO: Total # of broken channels: 0
14:37:36:ST3_smx:INFO: List of broken channels: []
14:37:36:ST3_smx:INFO: Total # of broken channels: 0
14:37:36:ST3_smx:INFO: List of broken channels: []
14:37:37:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:37:37:febtest:INFO: 01-00 | XA-000-08-002-000-000-224-15 | 53.6 | 1135.9
14:37:37:febtest:INFO: 08-01 | XA-000-08-002-000-004-206-07 | 31.4 | 1206.9
14:37:37:febtest:INFO: 03-02 | XA-000-08-002-000-000-225-15 | 50.4 | 1153.7
14:37:38:febtest:INFO: 10-03 | XA-000-08-002-000-004-205-07 | 31.4 | 1218.6
14:37:38:febtest:INFO: 05-04 | XA-000-08-002-000-000-238-15 | 50.4 | 1153.7
14:37:38:febtest:INFO: 12-05 | XA-000-08-002-000-004-197-07 | 40.9 | 1195.1
14:37:38:febtest:INFO: 07-06 | XA-000-08-002-000-000-240-08 | 44.1 | 1189.2
14:37:38:febtest:INFO: 14-07 | XA-000-08-002-000-004-196-07 | 37.7 | 1195.1
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_36_08
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1115
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.451', '1.9260', '1.850', '2.0060', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '1.9910', '1.850', '0.6089', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '1.9880', '1.850', '0.3204', '0.000', '0.0000', '0.000', '0.0000']
14:37:45:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:37:45:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:37:45:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:37:46:febtest:INFO: Testing FEB with SN 1115
14:37:48:smx_tester:INFO: Scanning setup
14:37:48:elinks:INFO: Disabling clock on downlink 0
14:37:48:elinks:INFO: Disabling clock on downlink 1
14:37:48:elinks:INFO: Disabling clock on downlink 2
14:37:48:elinks:INFO: Disabling clock on downlink 3
14:37:48:elinks:INFO: Disabling clock on downlink 4
14:37:48:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:37:48:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:37:49:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:37:49:elinks:INFO: Disabling clock on downlink 0
14:37:49:elinks:INFO: Disabling clock on downlink 1
14:37:49:elinks:INFO: Disabling clock on downlink 2
14:37:49:elinks:INFO: Disabling clock on downlink 3
14:37:49:elinks:INFO: Disabling clock on downlink 4
14:37:49:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:37:49:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:37:49:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:37:49:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:37:49:elinks:INFO: Disabling clock on downlink 0
14:37:49:elinks:INFO: Disabling clock on downlink 1
14:37:49:elinks:INFO: Disabling clock on downlink 2
14:37:49:elinks:INFO: Disabling clock on downlink 3
14:37:49:elinks:INFO: Disabling clock on downlink 4
14:37:49:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:37:49:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:37:49:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:37:49:elinks:INFO: Disabling clock on downlink 0
14:37:49:elinks:INFO: Disabling clock on downlink 1
14:37:49:elinks:INFO: Disabling clock on downlink 2
14:37:49:elinks:INFO: Disabling clock on downlink 3
14:37:49:elinks:INFO: Disabling clock on downlink 4
14:37:49:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:37:49:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:37:49:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:37:49:elinks:INFO: Disabling clock on downlink 0
14:37:49:elinks:INFO: Disabling clock on downlink 1
14:37:49:elinks:INFO: Disabling clock on downlink 2
14:37:49:elinks:INFO: Disabling clock on downlink 3
14:37:49:elinks:INFO: Disabling clock on downlink 4
14:37:49:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:37:49:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:37:49:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:37:49:setup_element:INFO: Scanning clock phase
14:37:49:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:37:49:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:37:49:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:37:49:setup_element:INFO: Eye window for uplink 0 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:37:49:setup_element:INFO: Eye window for uplink 1 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:37:49:setup_element:INFO: Eye window for uplink 2 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:37:49:setup_element:INFO: Eye window for uplink 3 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:37:49:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:37:49:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:37:49:setup_element:INFO: Eye window for uplink 6 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:37:49:setup_element:INFO: Eye window for uplink 7 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:37:49:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:37:49:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:37:49:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:37:49:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:37:49:setup_element:INFO: Eye window for uplink 12: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:37:49:setup_element:INFO: Eye window for uplink 13: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:37:49:setup_element:INFO: Eye window for uplink 14: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:37:49:setup_element:INFO: Eye window for uplink 15: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:37:49:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 1
14:37:49:setup_element:INFO: Scanning data phases
14:37:49:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:37:50:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:37:55:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:37:55:setup_element:INFO: Eye window for uplink 0 : ___________XXXXXXX______________________
Data delay found: 34
14:37:55:setup_element:INFO: Eye window for uplink 1 : _______XXXXXX___________________________
Data delay found: 29
14:37:55:setup_element:INFO: Eye window for uplink 2 : ________XXXXX___________________________
Data delay found: 30
14:37:55:setup_element:INFO: Eye window for uplink 3 : _____XXXXX______________________________
Data delay found: 27
14:37:55:setup_element:INFO: Eye window for uplink 4 : __XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 0
14:37:55:setup_element:WARNING: Group 0, downlink 1, uplink 5: No True values in scanned data!
Traceback (most recent call last):
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/setup_element.py", line 261, in characterize_data_phases
data_delay, window_len = find_center(fcl)
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/hctsp.py", line 87, in find_center
raise Exception("No True values in scanned data!")
Exception: No True values in scanned data!
14:37:55:setup_element:INFO: Eye window for uplink 6 : __________________________________XXXX__
Data delay found: 15
14:37:55:setup_element:INFO: Eye window for uplink 7 : _____________________________XXXXXX_____
Data delay found: 11
14:37:55:setup_element:INFO: Eye window for uplink 8 : _________________________XXXXX__________
Data delay found: 7
14:37:55:setup_element:INFO: Eye window for uplink 9 : ______________________________XXXXX_____
Data delay found: 12
14:37:55:setup_element:INFO: Eye window for uplink 10: _________________________XXXXXX_________
Data delay found: 7
14:37:55:setup_element:INFO: Eye window for uplink 11: _____________________________XXXXXX_____
Data delay found: 11
14:37:55:setup_element:INFO: Eye window for uplink 12: __________________________XXXXX_________
Data delay found: 8
14:37:55:setup_element:INFO: Eye window for uplink 13: _____________________________XXXXX______
Data delay found: 11
14:37:55:setup_element:INFO: Eye window for uplink 14: __________________________XXXX__________
Data delay found: 7
14:37:55:setup_element:INFO: Eye window for uplink 15: ____________________________XXXXX_______
Data delay found: 10
14:37:55:setup_element:INFO: Setting the data phase to 34 for uplink 0
14:37:55:setup_element:INFO: Setting the data phase to 29 for uplink 1
14:37:55:setup_element:INFO: Setting the data phase to 30 for uplink 2
14:37:55:setup_element:INFO: Setting the data phase to 27 for uplink 3
14:37:55:setup_element:INFO: Setting the data phase to 0 for uplink 4
14:37:55:setup_element:INFO: Setting the data phase to 15 for uplink 6
14:37:55:setup_element:INFO: Setting the data phase to 11 for uplink 7
14:37:55:setup_element:INFO: Setting the data phase to 7 for uplink 8
14:37:55:setup_element:INFO: Setting the data phase to 12 for uplink 9
14:37:55:setup_element:INFO: Setting the data phase to 7 for uplink 10
14:37:55:setup_element:INFO: Setting the data phase to 11 for uplink 11
14:37:55:setup_element:INFO: Setting the data phase to 8 for uplink 12
14:37:55:setup_element:INFO: Setting the data phase to 11 for uplink 13
14:37:55:setup_element:INFO: Setting the data phase to 7 for uplink 14
14:37:55:setup_element:INFO: Setting the data phase to 10 for uplink 15
14:37:55:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXXX
Uplink 1: ________________________________________________________________________XXXXXXXX
Uplink 2: ________________________________________________________________________XXXXXXX_
Uplink 3: ________________________________________________________________________XXXXXXX_
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _____________________________________________________________________XXXXXXX____
Uplink 7: _____________________________________________________________________XXXXXXX____
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: _____________________________________________________________________XXXXXXXXX__
Uplink 13: _____________________________________________________________________XXXXXXXXX__
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 1:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 2:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 3:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 4:
Optimal Phase: 0
Window Length: 2
Eye Window: __XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 6:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 7:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 8:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 34
Eye Window: _________________________XXXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 12:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 13:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 14:
Optimal Phase: 7
Window Length: 36
Eye Window: __________________________XXXX__________
Uplink 15:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
]
14:37:55:setup_element:INFO: Beginning SMX ASICs map scan
14:37:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:37:55:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:37:55:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:37:55:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:37:55:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:37:55:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:37:55:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:37:55:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:37:55:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:37:55:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:37:55:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:37:55:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:37:55:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:37:55:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:37:56:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:37:56:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:37:56:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:37:56:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:37:56:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:37:56:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:37:57:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXXX
Uplink 1: ________________________________________________________________________XXXXXXXX
Uplink 2: ________________________________________________________________________XXXXXXX_
Uplink 3: ________________________________________________________________________XXXXXXX_
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _____________________________________________________________________XXXXXXX____
Uplink 7: _____________________________________________________________________XXXXXXX____
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: _____________________________________________________________________XXXXXXXXX__
Uplink 13: _____________________________________________________________________XXXXXXXXX__
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 1:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 2:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 3:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 4:
Optimal Phase: 0
Window Length: 2
Eye Window: __XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 6:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 7:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 8:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 34
Eye Window: _________________________XXXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 12:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 13:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 14:
Optimal Phase: 7
Window Length: 36
Eye Window: __________________________XXXX__________
Uplink 15:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
14:37:57:setup_element:INFO: Performing Elink synchronization
14:37:57:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:37:57:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:37:57:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:37:57:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:37:57:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:37:57:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:37:57:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [1] | 1 | 0 | [4] | [(1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
Traceback (most recent call last):
File "febtest.py", line 371, in DoFEB_MicrocableTest
if self.DoScanFEB8(reporter.out_dict):
File "febtest.py", line 189, in DoScanFEB8
self.EMU.Scan_FEB8(reporter)
File "/home/cbm/ST3_v2.29.14/lib/ST3_emu_feb.py", line 59, in Scan_FEB8
self.mysmx[nn] = ST3_smx.ST3_smx( smx,
File "/home/cbm/ST3_v2.29.14/lib/ST3_smx.py", line 228, in __init__
Canvas_index = smx_index[upln]
KeyError: 4
14:38:11:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:38:11:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:38:11:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:38:12:febtest:INFO: Testing FEB with SN 1115
14:38:15:smx_tester:INFO: Scanning setup
14:38:15:elinks:INFO: Disabling clock on downlink 0
14:38:15:elinks:INFO: Disabling clock on downlink 1
14:38:15:elinks:INFO: Disabling clock on downlink 2
14:38:15:elinks:INFO: Disabling clock on downlink 3
14:38:15:elinks:INFO: Disabling clock on downlink 4
14:38:15:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:38:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:38:15:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:38:15:elinks:INFO: Disabling clock on downlink 0
14:38:15:elinks:INFO: Disabling clock on downlink 1
14:38:15:elinks:INFO: Disabling clock on downlink 2
14:38:15:elinks:INFO: Disabling clock on downlink 3
14:38:15:elinks:INFO: Disabling clock on downlink 4
14:38:15:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:38:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:38:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:38:15:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:38:15:elinks:INFO: Disabling clock on downlink 0
14:38:15:elinks:INFO: Disabling clock on downlink 1
14:38:15:elinks:INFO: Disabling clock on downlink 2
14:38:15:elinks:INFO: Disabling clock on downlink 3
14:38:15:elinks:INFO: Disabling clock on downlink 4
14:38:15:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:38:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:38:15:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:38:15:elinks:INFO: Disabling clock on downlink 0
14:38:15:elinks:INFO: Disabling clock on downlink 1
14:38:15:elinks:INFO: Disabling clock on downlink 2
14:38:15:elinks:INFO: Disabling clock on downlink 3
14:38:15:elinks:INFO: Disabling clock on downlink 4
14:38:15:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:38:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:38:15:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:38:15:elinks:INFO: Disabling clock on downlink 0
14:38:15:elinks:INFO: Disabling clock on downlink 1
14:38:15:elinks:INFO: Disabling clock on downlink 2
14:38:15:elinks:INFO: Disabling clock on downlink 3
14:38:15:elinks:INFO: Disabling clock on downlink 4
14:38:15:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:38:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:38:16:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:38:16:setup_element:INFO: Scanning clock phase
14:38:16:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:38:16:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:38:16:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:38:16:setup_element:INFO: Eye window for uplink 0 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:38:16:setup_element:INFO: Eye window for uplink 1 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:38:16:setup_element:INFO: Eye window for uplink 2 : ________________________________________________________________________________
Clock Delay: 40
14:38:16:setup_element:INFO: Eye window for uplink 3 : ________________________________________________________________________________
Clock Delay: 40
14:38:16:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:38:16:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:38:16:setup_element:INFO: Eye window for uplink 6 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:38:16:setup_element:INFO: Eye window for uplink 7 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:38:16:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:38:16:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:38:16:setup_element:INFO: Eye window for uplink 10: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
14:38:16:setup_element:INFO: Eye window for uplink 11: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
14:38:16:setup_element:INFO: Eye window for uplink 12: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:38:16:setup_element:INFO: Eye window for uplink 13: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:38:16:setup_element:INFO: Eye window for uplink 14: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:38:16:setup_element:INFO: Eye window for uplink 15: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:38:16:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:38:16:setup_element:INFO: Scanning data phases
14:38:16:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:38:16:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:38:22:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:38:22:setup_element:INFO: Eye window for uplink 0 : ____________XXXXXX______________________
Data delay found: 34
14:38:22:setup_element:INFO: Eye window for uplink 1 : ________XXXXXX__________________________
Data delay found: 30
14:38:22:setup_element:INFO: Eye window for uplink 2 : ________XXXXXX__________________________
Data delay found: 30
14:38:22:setup_element:INFO: Eye window for uplink 3 : ______XXXXX_____________________________
Data delay found: 28
14:38:22:setup_element:INFO: Eye window for uplink 4 : ___XXXXXX_______________________________
Data delay found: 25
14:38:22:setup_element:INFO: Eye window for uplink 5 : XXXXX__________________________________X
Data delay found: 21
14:38:22:setup_element:INFO: Eye window for uplink 6 : ___________________________________XXXX_
Data delay found: 16
14:38:22:setup_element:INFO: Eye window for uplink 7 : ______________________________XXXXXX____
Data delay found: 12
14:38:22:setup_element:INFO: Eye window for uplink 8 : __________________________XXXXX_________
Data delay found: 8
14:38:22:setup_element:INFO: Eye window for uplink 9 : _______________________________XXXXX____
Data delay found: 13
14:38:22:setup_element:INFO: Eye window for uplink 10: _________________________XXXXXXX________
Data delay found: 8
14:38:22:setup_element:INFO: Eye window for uplink 11: _____________________________XXXXXX_____
Data delay found: 11
14:38:22:setup_element:INFO: Eye window for uplink 12: ____________________________XXXX________
Data delay found: 9
14:38:22:setup_element:INFO: Eye window for uplink 13: ______________________________XXXXX_____
Data delay found: 12
14:38:22:setup_element:INFO: Eye window for uplink 14: ___________________________XXXX_________
Data delay found: 8
14:38:22:setup_element:INFO: Eye window for uplink 15: _____________________________XXXX_______
Data delay found: 10
14:38:22:setup_element:INFO: Setting the data phase to 34 for uplink 0
14:38:22:setup_element:INFO: Setting the data phase to 30 for uplink 1
14:38:22:setup_element:INFO: Setting the data phase to 30 for uplink 2
14:38:22:setup_element:INFO: Setting the data phase to 28 for uplink 3
14:38:22:setup_element:INFO: Setting the data phase to 25 for uplink 4
14:38:22:setup_element:INFO: Setting the data phase to 21 for uplink 5
14:38:22:setup_element:INFO: Setting the data phase to 16 for uplink 6
14:38:22:setup_element:INFO: Setting the data phase to 12 for uplink 7
14:38:22:setup_element:INFO: Setting the data phase to 8 for uplink 8
14:38:22:setup_element:INFO: Setting the data phase to 13 for uplink 9
14:38:22:setup_element:INFO: Setting the data phase to 8 for uplink 10
14:38:22:setup_element:INFO: Setting the data phase to 11 for uplink 11
14:38:22:setup_element:INFO: Setting the data phase to 9 for uplink 12
14:38:22:setup_element:INFO: Setting the data phase to 12 for uplink 13
14:38:22:setup_element:INFO: Setting the data phase to 8 for uplink 14
14:38:22:setup_element:INFO: Setting the data phase to 10 for uplink 15
14:38:22:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 68
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXXX
Uplink 1: ________________________________________________________________________XXXXXXXX
Uplink 2: ________________________________________________________________________________
Uplink 3: ________________________________________________________________________________
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _____________________________________________________________________XXXXXXX____
Uplink 7: _____________________________________________________________________XXXXXXX____
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ____________________________________________________________________XXXXXXXXX___
Uplink 11: ____________________________________________________________________XXXXXXXXX___
Uplink 12: _____________________________________________________________________XXXXXXXXX__
Uplink 13: _____________________________________________________________________XXXXXXXXX__
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 1:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 2:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 3:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 4:
Optimal Phase: 25
Window Length: 34
Eye Window: ___XXXXXX_______________________________
Uplink 5:
Optimal Phase: 21
Window Length: 34
Eye Window: XXXXX__________________________________X
Uplink 6:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 7:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
Uplink 8:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 9:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 10:
Optimal Phase: 8
Window Length: 33
Eye Window: _________________________XXXXXXX________
Uplink 11:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 12:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 8
Window Length: 36
Eye Window: ___________________________XXXX_________
Uplink 15:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
]
14:38:22:setup_element:INFO: Beginning SMX ASICs map scan
14:38:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:38:22:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:38:22:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:38:22:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:38:22:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:38:22:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:38:22:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:38:22:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:38:22:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:38:22:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:38:22:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:38:22:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:38:22:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:38:23:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:38:23:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:38:23:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:38:23:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:38:23:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:38:23:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:38:23:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:38:23:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:38:24:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 68
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXXX
Uplink 1: ________________________________________________________________________XXXXXXXX
Uplink 2: ________________________________________________________________________________
Uplink 3: ________________________________________________________________________________
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _____________________________________________________________________XXXXXXX____
Uplink 7: _____________________________________________________________________XXXXXXX____
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ____________________________________________________________________XXXXXXXXX___
Uplink 11: ____________________________________________________________________XXXXXXXXX___
Uplink 12: _____________________________________________________________________XXXXXXXXX__
Uplink 13: _____________________________________________________________________XXXXXXXXX__
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 1:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 2:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 3:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 4:
Optimal Phase: 25
Window Length: 34
Eye Window: ___XXXXXX_______________________________
Uplink 5:
Optimal Phase: 21
Window Length: 34
Eye Window: XXXXX__________________________________X
Uplink 6:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 7:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
Uplink 8:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 9:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 10:
Optimal Phase: 8
Window Length: 33
Eye Window: _________________________XXXXXXX________
Uplink 11:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 12:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 8
Window Length: 36
Eye Window: ___________________________XXXX_________
Uplink 15:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
14:38:24:setup_element:INFO: Performing Elink synchronization
14:38:24:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:38:24:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:38:24:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:38:24:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:38:24:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:38:24:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:38:25:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
14:38:25:smx_tester:INFO: Scanning setup
14:38:25:elinks:INFO: Disabling clock on downlink 0
14:38:25:elinks:INFO: Disabling clock on downlink 1
14:38:25:elinks:INFO: Disabling clock on downlink 2
14:38:25:elinks:INFO: Disabling clock on downlink 3
14:38:25:elinks:INFO: Disabling clock on downlink 4
14:38:25:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:38:25:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:38:26:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:38:26:elinks:INFO: Disabling clock on downlink 0
14:38:26:elinks:INFO: Disabling clock on downlink 1
14:38:26:elinks:INFO: Disabling clock on downlink 2
14:38:26:elinks:INFO: Disabling clock on downlink 3
14:38:26:elinks:INFO: Disabling clock on downlink 4
14:38:26:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:38:26:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:38:26:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:38:26:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:38:26:elinks:INFO: Disabling clock on downlink 0
14:38:26:elinks:INFO: Disabling clock on downlink 1
14:38:26:elinks:INFO: Disabling clock on downlink 2
14:38:26:elinks:INFO: Disabling clock on downlink 3
14:38:26:elinks:INFO: Disabling clock on downlink 4
14:38:26:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:38:26:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:38:26:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:38:26:elinks:INFO: Disabling clock on downlink 0
14:38:26:elinks:INFO: Disabling clock on downlink 1
14:38:26:elinks:INFO: Disabling clock on downlink 2
14:38:26:elinks:INFO: Disabling clock on downlink 3
14:38:26:elinks:INFO: Disabling clock on downlink 4
14:38:26:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:38:26:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:38:26:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:38:26:elinks:INFO: Disabling clock on downlink 0
14:38:26:elinks:INFO: Disabling clock on downlink 1
14:38:26:elinks:INFO: Disabling clock on downlink 2
14:38:26:elinks:INFO: Disabling clock on downlink 3
14:38:26:elinks:INFO: Disabling clock on downlink 4
14:38:26:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:38:26:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:38:26:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:38:26:setup_element:INFO: Scanning clock phase
14:38:26:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:38:26:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:38:27:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:38:27:setup_element:INFO: Eye window for uplink 0 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:38:27:setup_element:INFO: Eye window for uplink 1 : ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:38:27:setup_element:INFO: Eye window for uplink 2 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:38:27:setup_element:INFO: Eye window for uplink 3 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:38:27:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:38:27:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:38:27:setup_element:INFO: Eye window for uplink 6 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:38:27:setup_element:INFO: Eye window for uplink 7 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:38:27:setup_element:INFO: Eye window for uplink 8 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:38:27:setup_element:INFO: Eye window for uplink 9 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:38:27:setup_element:INFO: Eye window for uplink 10: ________________________________________________________________________________
Clock Delay: 40
14:38:27:setup_element:INFO: Eye window for uplink 11: ________________________________________________________________________________
Clock Delay: 40
14:38:27:setup_element:INFO: Eye window for uplink 12: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:38:27:setup_element:INFO: Eye window for uplink 13: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:38:27:setup_element:INFO: Eye window for uplink 14: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:38:27:setup_element:INFO: Eye window for uplink 15: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:38:27:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 1
14:38:27:setup_element:INFO: Scanning data phases
14:38:27:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:38:27:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:38:32:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:38:32:setup_element:INFO: Eye window for uplink 0 : ___________XXXXXX_______________________
Data delay found: 33
14:38:32:setup_element:INFO: Eye window for uplink 1 : _______XXXXX____________________________
Data delay found: 29
14:38:32:setup_element:INFO: Eye window for uplink 2 : _______XXXXXX___________________________
Data delay found: 29
14:38:32:setup_element:INFO: Eye window for uplink 3 : _____XXXXX______________________________
Data delay found: 27
14:38:32:setup_element:INFO: Eye window for uplink 4 : __XXXXXX________________________________
Data delay found: 24
14:38:32:setup_element:INFO: Eye window for uplink 5 : XXX__________________________________XXX
Data delay found: 19
14:38:32:setup_element:INFO: Eye window for uplink 6 : __________________________________XXXX__
Data delay found: 15
14:38:32:setup_element:INFO: Eye window for uplink 7 : _____________________________XXXXXX_____
Data delay found: 11
14:38:32:setup_element:INFO: Eye window for uplink 8 : _________________________XXXXX__________
Data delay found: 7
14:38:32:setup_element:INFO: Eye window for uplink 9 : ______________________________XXXXX_____
Data delay found: 12
14:38:32:setup_element:INFO: Eye window for uplink 10: ________________________XXXXXXX_________
Data delay found: 7
14:38:32:setup_element:INFO: Eye window for uplink 11: ____________________________XXXXXX______
Data delay found: 10
14:38:32:setup_element:INFO: Eye window for uplink 12: __________________________XXXXX_________
Data delay found: 8
14:38:32:setup_element:INFO: Eye window for uplink 13: _____________________________XXXXX______
Data delay found: 11
14:38:32:setup_element:INFO: Eye window for uplink 14: __________________________XXXX__________
Data delay found: 7
14:38:32:setup_element:INFO: Eye window for uplink 15: ____________________________XXXXX_______
Data delay found: 10
14:38:32:setup_element:INFO: Setting the data phase to 33 for uplink 0
14:38:32:setup_element:INFO: Setting the data phase to 29 for uplink 1
14:38:32:setup_element:INFO: Setting the data phase to 29 for uplink 2
14:38:32:setup_element:INFO: Setting the data phase to 27 for uplink 3
14:38:32:setup_element:INFO: Setting the data phase to 24 for uplink 4
14:38:32:setup_element:INFO: Setting the data phase to 19 for uplink 5
14:38:32:setup_element:INFO: Setting the data phase to 15 for uplink 6
14:38:32:setup_element:INFO: Setting the data phase to 11 for uplink 7
14:38:32:setup_element:INFO: Setting the data phase to 7 for uplink 8
14:38:32:setup_element:INFO: Setting the data phase to 12 for uplink 9
14:38:32:setup_element:INFO: Setting the data phase to 7 for uplink 10
14:38:32:setup_element:INFO: Setting the data phase to 10 for uplink 11
14:38:32:setup_element:INFO: Setting the data phase to 8 for uplink 12
14:38:32:setup_element:INFO: Setting the data phase to 11 for uplink 13
14:38:32:setup_element:INFO: Setting the data phase to 7 for uplink 14
14:38:32:setup_element:INFO: Setting the data phase to 10 for uplink 15
14:38:32:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXXX
Uplink 1: ________________________________________________________________________XXXXXXXX
Uplink 2: ________________________________________________________________________XXXXXXX_
Uplink 3: ________________________________________________________________________XXXXXXX_
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _____________________________________________________________________XXXXXXX____
Uplink 7: _____________________________________________________________________XXXXXXX____
Uplink 8: ______________________________________________________________________XXXXXXX___
Uplink 9: ______________________________________________________________________XXXXXXX___
Uplink 10: ________________________________________________________________________________
Uplink 11: ________________________________________________________________________________
Uplink 12: _____________________________________________________________________XXXXXXXXX__
Uplink 13: _____________________________________________________________________XXXXXXXXX__
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 3:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 4:
Optimal Phase: 24
Window Length: 34
Eye Window: __XXXXXX________________________________
Uplink 5:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 6:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 7:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 8:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 33
Eye Window: ________________________XXXXXXX_________
Uplink 11:
Optimal Phase: 10
Window Length: 34
Eye Window: ____________________________XXXXXX______
Uplink 12:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 13:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 14:
Optimal Phase: 7
Window Length: 36
Eye Window: __________________________XXXX__________
Uplink 15:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
]
14:38:32:setup_element:INFO: Beginning SMX ASICs map scan
14:38:32:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:38:32:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:38:33:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:38:33:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:38:33:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:38:33:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:38:33:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:38:33:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:38:33:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:38:33:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:38:33:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:38:33:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:38:33:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:38:33:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:38:33:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:38:33:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:38:33:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:38:34:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:38:34:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:38:34:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:38:34:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:38:35:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 69
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXXX
Uplink 1: ________________________________________________________________________XXXXXXXX
Uplink 2: ________________________________________________________________________XXXXXXX_
Uplink 3: ________________________________________________________________________XXXXXXX_
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _____________________________________________________________________XXXXXXX____
Uplink 7: _____________________________________________________________________XXXXXXX____
Uplink 8: ______________________________________________________________________XXXXXXX___
Uplink 9: ______________________________________________________________________XXXXXXX___
Uplink 10: ________________________________________________________________________________
Uplink 11: ________________________________________________________________________________
Uplink 12: _____________________________________________________________________XXXXXXXXX__
Uplink 13: _____________________________________________________________________XXXXXXXXX__
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 3:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 4:
Optimal Phase: 24
Window Length: 34
Eye Window: __XXXXXX________________________________
Uplink 5:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 6:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 7:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 8:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 33
Eye Window: ________________________XXXXXXX_________
Uplink 11:
Optimal Phase: 10
Window Length: 34
Eye Window: ____________________________XXXXXX______
Uplink 12:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 13:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 14:
Optimal Phase: 7
Window Length: 36
Eye Window: __________________________XXXX__________
Uplink 15:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
14:38:35:setup_element:INFO: Performing Elink synchronization
14:38:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:38:35:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:38:35:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:38:35:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:38:35:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:38:35:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:38:35:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
14:38:37:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:38:37:febtest:INFO: 01-00 | XA-000-08-002-000-000-224-15 | 47.3 | 1159.7
14:38:37:febtest:INFO: 08-01 | XA-000-08-002-000-004-206-07 | 21.9 | 1247.9
14:38:37:febtest:INFO: 03-02 | XA-000-08-002-000-000-225-15 | 44.1 | 1177.4
14:38:38:febtest:INFO: 10-03 | XA-000-08-002-000-004-205-07 | 28.2 | 1230.3
14:38:38:febtest:INFO: 05-04 | XA-000-08-002-000-000-238-15 | 53.6 | 1147.8
14:38:38:febtest:INFO: 12-05 | XA-000-08-002-000-004-197-07 | 50.4 | 1165.6
14:38:38:febtest:INFO: 07-06 | XA-000-08-002-000-000-240-08 | 40.9 | 1201.0
14:38:38:febtest:INFO: 14-07 | XA-000-08-002-000-004-196-07 | 34.6 | 1212.7
14:38:39:ST3_smx:INFO: Configuring SMX FAST
14:38:40:ST3_smx:INFO: chip: 1-0 53.612520 C 1135.937260 mV
14:38:41:ST3_smx:INFO: Electrons
14:38:41:ST3_smx:INFO: # loops 0
14:38:42:ST3_smx:INFO: # loops 1
14:38:44:ST3_smx:INFO: # loops 2
14:38:46:ST3_smx:INFO: Total # of broken channels: 0
14:38:46:ST3_smx:INFO: List of broken channels: []
14:38:46:ST3_smx:INFO: Total # of broken channels: 0
14:38:46:ST3_smx:INFO: List of broken channels: []
14:38:47:ST3_smx:INFO: Configuring SMX FAST
14:38:49:ST3_smx:INFO: chip: 8-1 34.556970 C 1206.851500 mV
14:38:49:ST3_smx:INFO: Electrons
14:38:49:ST3_smx:INFO: # loops 0
14:38:50:ST3_smx:INFO: # loops 1
14:38:52:ST3_smx:INFO: # loops 2
14:38:54:ST3_smx:INFO: Total # of broken channels: 0
14:38:54:ST3_smx:INFO: List of broken channels: []
14:38:54:ST3_smx:INFO: Total # of broken channels: 0
14:38:54:ST3_smx:INFO: List of broken channels: []
14:38:55:ST3_smx:INFO: Configuring SMX FAST
14:38:57:ST3_smx:INFO: chip: 3-2 50.430383 C 1153.732915 mV
14:38:57:ST3_smx:INFO: Electrons
14:38:57:ST3_smx:INFO: # loops 0
14:38:58:ST3_smx:INFO: # loops 1
14:39:00:ST3_smx:INFO: # loops 2
14:39:02:ST3_smx:INFO: Total # of broken channels: 3
14:39:02:ST3_smx:INFO: List of broken channels: [105, 111, 113]
14:39:02:ST3_smx:INFO: Total # of broken channels: 3
14:39:02:ST3_smx:INFO: List of broken channels: [105, 111, 113]
14:39:03:ST3_smx:INFO: Configuring SMX FAST
14:39:05:ST3_smx:INFO: chip: 10-3 31.389742 C 1218.600960 mV
14:39:05:ST3_smx:INFO: Electrons
14:39:05:ST3_smx:INFO: # loops 0
14:39:06:ST3_smx:INFO: # loops 1
14:39:08:ST3_smx:INFO: # loops 2
14:39:10:ST3_smx:INFO: Total # of broken channels: 0
14:39:10:ST3_smx:INFO: List of broken channels: []
14:39:10:ST3_smx:INFO: Total # of broken channels: 0
14:39:10:ST3_smx:INFO: List of broken channels: []
14:39:11:ST3_smx:INFO: Configuring SMX FAST
14:39:13:ST3_smx:INFO: chip: 5-4 50.430383 C 1153.732915 mV
14:39:13:ST3_smx:INFO: Electrons
14:39:13:ST3_smx:INFO: # loops 0
14:39:15:ST3_smx:INFO: # loops 1
14:39:17:ST3_smx:INFO: # loops 2
14:39:19:ST3_smx:INFO: Total # of broken channels: 0
14:39:19:ST3_smx:INFO: List of broken channels: []
14:39:19:ST3_smx:INFO: Total # of broken channels: 0
14:39:19:ST3_smx:INFO: List of broken channels: []
14:39:20:ST3_smx:INFO: Configuring SMX FAST
14:39:22:ST3_smx:INFO: chip: 12-5 40.898880 C 1200.969315 mV
14:39:22:ST3_smx:INFO: Electrons
14:39:22:ST3_smx:INFO: # loops 0
14:39:24:ST3_smx:INFO: # loops 1
14:39:25:ST3_smx:INFO: # loops 2
14:39:27:ST3_smx:INFO: Total # of broken channels: 0
14:39:27:ST3_smx:INFO: List of broken channels: []
14:39:27:ST3_smx:INFO: Total # of broken channels: 0
14:39:27:ST3_smx:INFO: List of broken channels: []
14:39:28:ST3_smx:INFO: Configuring SMX FAST
14:39:30:ST3_smx:INFO: chip: 7-6 47.250730 C 1189.190035 mV
14:39:30:ST3_smx:INFO: Electrons
14:39:30:ST3_smx:INFO: # loops 0
14:39:32:ST3_smx:INFO: # loops 1
14:39:34:ST3_smx:INFO: # loops 2
14:39:36:ST3_smx:INFO: Total # of broken channels: 0
14:39:36:ST3_smx:INFO: List of broken channels: []
14:39:36:ST3_smx:INFO: Total # of broken channels: 0
14:39:36:ST3_smx:INFO: List of broken channels: []
14:39:37:ST3_smx:INFO: Configuring SMX FAST
14:39:39:ST3_smx:INFO: chip: 14-7 40.898880 C 1195.082160 mV
14:39:39:ST3_smx:INFO: Electrons
14:39:39:ST3_smx:INFO: # loops 0
14:39:41:ST3_smx:INFO: # loops 1
14:39:43:ST3_smx:INFO: # loops 2
14:39:45:ST3_smx:INFO: Total # of broken channels: 0
14:39:45:ST3_smx:INFO: List of broken channels: []
14:39:45:ST3_smx:INFO: Total # of broken channels: 0
14:39:45:ST3_smx:INFO: List of broken channels: []
14:39:46:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:39:46:febtest:INFO: 01-00 | XA-000-08-002-000-000-224-15 | 56.8 | 1130.0
14:39:46:febtest:INFO: 08-01 | XA-000-08-002-000-004-206-07 | 34.6 | 1206.9
14:39:46:febtest:INFO: 03-02 | XA-000-08-002-000-000-225-15 | 53.6 | 1153.7
14:39:47:febtest:INFO: 10-03 | XA-000-08-002-000-004-205-07 | 31.4 | 1218.6
14:39:47:febtest:INFO: 05-04 | XA-000-08-002-000-000-238-15 | 53.6 | 1153.7
14:39:47:febtest:INFO: 12-05 | XA-000-08-002-000-004-197-07 | 40.9 | 1201.0
14:39:47:febtest:INFO: 07-06 | XA-000-08-002-000-000-240-08 | 47.3 | 1183.3
14:39:47:febtest:INFO: 14-07 | XA-000-08-002-000-004-196-07 | 40.9 | 1195.1
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_38_11
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1115
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.451', '1.8970', '1.850', '1.9010', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '1.9960', '1.850', '0.6094', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '1.9910', '1.850', '0.3208', '0.000', '0.0000', '0.000', '0.0000']
14:39:58:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:41:56:febtest:INFO: FEB type: 8.2
14:41:56:febtest:INFO: FEB SN: 1119
14:42:08:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:42:08:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:42:08:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:42:09:febtest:INFO: Testing FEB with SN 1119
14:42:12:smx_tester:INFO: Scanning setup
14:42:12:elinks:INFO: Disabling clock on downlink 0
14:42:12:elinks:INFO: Disabling clock on downlink 1
14:42:12:elinks:INFO: Disabling clock on downlink 2
14:42:12:elinks:INFO: Disabling clock on downlink 3
14:42:12:elinks:INFO: Disabling clock on downlink 4
14:42:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:42:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:42:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:42:12:elinks:INFO: Disabling clock on downlink 0
14:42:12:elinks:INFO: Disabling clock on downlink 1
14:42:12:elinks:INFO: Disabling clock on downlink 2
14:42:12:elinks:INFO: Disabling clock on downlink 3
14:42:12:elinks:INFO: Disabling clock on downlink 4
14:42:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:42:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:42:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:42:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:42:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:42:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:42:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:42:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:42:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:42:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:42:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:42:12:elinks:INFO: Disabling clock on downlink 0
14:42:12:elinks:INFO: Disabling clock on downlink 1
14:42:12:elinks:INFO: Disabling clock on downlink 2
14:42:12:elinks:INFO: Disabling clock on downlink 3
14:42:12:elinks:INFO: Disabling clock on downlink 4
14:42:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:42:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:42:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:42:12:elinks:INFO: Disabling clock on downlink 0
14:42:12:elinks:INFO: Disabling clock on downlink 1
14:42:12:elinks:INFO: Disabling clock on downlink 2
14:42:12:elinks:INFO: Disabling clock on downlink 3
14:42:12:elinks:INFO: Disabling clock on downlink 4
14:42:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:42:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:42:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:42:12:elinks:INFO: Disabling clock on downlink 0
14:42:12:elinks:INFO: Disabling clock on downlink 1
14:42:12:elinks:INFO: Disabling clock on downlink 2
14:42:12:elinks:INFO: Disabling clock on downlink 3
14:42:12:elinks:INFO: Disabling clock on downlink 4
14:42:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:42:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:42:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:42:12:setup_element:INFO: Scanning clock phase
14:42:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:42:13:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:42:13:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:42:13:setup_element:INFO: Eye window for uplink 8 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:42:13:setup_element:INFO: Eye window for uplink 9 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:42:13:setup_element:INFO: Eye window for uplink 10: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:42:13:setup_element:INFO: Eye window for uplink 11: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:42:13:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:42:13:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:42:13:setup_element:INFO: Eye window for uplink 14: ________________________________________________________________________________
Clock Delay: 40
14:42:13:setup_element:INFO: Eye window for uplink 15: ________________________________________________________________________________
Clock Delay: 40
14:42:13:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:42:13:setup_element:INFO: Scanning data phases
14:42:13:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:42:13:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:42:18:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:42:18:setup_element:INFO: Eye window for uplink 8 : ______________________________XXXX______
Data delay found: 11
14:42:18:setup_element:INFO: Eye window for uplink 9 : ___________________________________XXXXX
Data delay found: 17
14:42:18:setup_element:INFO: Eye window for uplink 10: _______________________________XXXXX____
Data delay found: 13
14:42:18:setup_element:INFO: Eye window for uplink 11: ___________________________________XXXXX
Data delay found: 17
14:42:18:setup_element:INFO: Eye window for uplink 12: _____________________________XXXXX______
Data delay found: 11
14:42:18:setup_element:INFO: Eye window for uplink 13: ________________________________XXXXXX__
Data delay found: 14
14:42:18:setup_element:INFO: Eye window for uplink 14: _____________________________XXXXX______
Data delay found: 11
14:42:18:setup_element:INFO: Eye window for uplink 15: ______________________________XXXXXX____
Data delay found: 12
14:42:18:setup_element:INFO: Setting the data phase to 11 for uplink 8
14:42:18:setup_element:INFO: Setting the data phase to 17 for uplink 9
14:42:18:setup_element:INFO: Setting the data phase to 13 for uplink 10
14:42:18:setup_element:INFO: Setting the data phase to 17 for uplink 11
14:42:18:setup_element:INFO: Setting the data phase to 11 for uplink 12
14:42:18:setup_element:INFO: Setting the data phase to 14 for uplink 13
14:42:18:setup_element:INFO: Setting the data phase to 11 for uplink 14
14:42:18:setup_element:INFO: Setting the data phase to 12 for uplink 15
14:42:18:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 72
Eye Windows:
Uplink 8: ______________________________________________________________________XXXXXXXX__
Uplink 9: ______________________________________________________________________XXXXXXXX__
Uplink 10: ______________________________________________________________________XXXXXXX___
Uplink 11: ______________________________________________________________________XXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: ________________________________________________________________________________
Uplink 15: ________________________________________________________________________________
Data phase characteristics:
Uplink 8:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 9:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 10:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 11:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 12:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 13:
Optimal Phase: 14
Window Length: 34
Eye Window: ________________________________XXXXXX__
Uplink 14:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 15:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
]
14:42:18:setup_element:INFO: Beginning SMX ASICs map scan
14:42:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:42:18:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:42:18:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:42:18:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:42:18:uplink:INFO: Setting uplinks mask [8, 9, 10, 11, 12, 13, 14, 15]
14:42:18:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:42:18:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:42:19:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:42:19:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:42:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:42:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:42:19:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:42:19:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:42:21:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 72
Eye Windows:
Uplink 8: ______________________________________________________________________XXXXXXXX__
Uplink 9: ______________________________________________________________________XXXXXXXX__
Uplink 10: ______________________________________________________________________XXXXXXX___
Uplink 11: ______________________________________________________________________XXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: ________________________________________________________________________________
Uplink 15: ________________________________________________________________________________
Data phase characteristics:
Uplink 8:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 9:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 10:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 11:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 12:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 13:
Optimal Phase: 14
Window Length: 34
Eye Window: ________________________________XXXXXX__
Uplink 14:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 15:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
14:42:21:setup_element:INFO: Performing Elink synchronization
14:42:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:42:21:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:42:21:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:42:21:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:42:21:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:42:21:uplink:INFO: Enabling uplinks [8, 9, 10, 11, 12, 13, 14, 15]
14:42:21:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
14:42:21:smx_tester:INFO: Scanning setup
14:42:21:elinks:INFO: Disabling clock on downlink 0
14:42:21:elinks:INFO: Disabling clock on downlink 1
14:42:21:elinks:INFO: Disabling clock on downlink 2
14:42:21:elinks:INFO: Disabling clock on downlink 3
14:42:21:elinks:INFO: Disabling clock on downlink 4
14:42:21:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:42:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:42:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:42:22:elinks:INFO: Disabling clock on downlink 0
14:42:22:elinks:INFO: Disabling clock on downlink 1
14:42:22:elinks:INFO: Disabling clock on downlink 2
14:42:22:elinks:INFO: Disabling clock on downlink 3
14:42:22:elinks:INFO: Disabling clock on downlink 4
14:42:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:42:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:42:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:42:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:42:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:42:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:42:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:42:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:42:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:42:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:42:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:42:22:elinks:INFO: Disabling clock on downlink 0
14:42:22:elinks:INFO: Disabling clock on downlink 1
14:42:22:elinks:INFO: Disabling clock on downlink 2
14:42:22:elinks:INFO: Disabling clock on downlink 3
14:42:22:elinks:INFO: Disabling clock on downlink 4
14:42:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:42:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:42:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:42:22:elinks:INFO: Disabling clock on downlink 0
14:42:22:elinks:INFO: Disabling clock on downlink 1
14:42:22:elinks:INFO: Disabling clock on downlink 2
14:42:22:elinks:INFO: Disabling clock on downlink 3
14:42:22:elinks:INFO: Disabling clock on downlink 4
14:42:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:42:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:42:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:42:22:elinks:INFO: Disabling clock on downlink 0
14:42:22:elinks:INFO: Disabling clock on downlink 1
14:42:22:elinks:INFO: Disabling clock on downlink 2
14:42:22:elinks:INFO: Disabling clock on downlink 3
14:42:22:elinks:INFO: Disabling clock on downlink 4
14:42:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:42:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:42:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:42:22:setup_element:INFO: Scanning clock phase
14:42:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:42:22:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:42:23:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:42:23:setup_element:INFO: Eye window for uplink 8 : ________________________________________________________________________________
Clock Delay: 40
14:42:23:setup_element:INFO: Eye window for uplink 9 : ________________________________________________________________________________
Clock Delay: 40
14:42:23:setup_element:INFO: Eye window for uplink 10: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:42:23:setup_element:INFO: Eye window for uplink 11: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:42:23:setup_element:INFO: Eye window for uplink 12: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:42:23:setup_element:INFO: Eye window for uplink 13: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:42:23:setup_element:INFO: Eye window for uplink 14: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:42:23:setup_element:INFO: Eye window for uplink 15: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:42:23:setup_element:INFO: Setting the clock phase to 32 for group 0, downlink 1
14:42:23:setup_element:INFO: Scanning data phases
14:42:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:42:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:42:28:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:42:28:setup_element:INFO: Eye window for uplink 8 : _______________________________XXXX_____
Data delay found: 12
14:42:28:setup_element:INFO: Eye window for uplink 9 : X__________________________________XXXXX
Data delay found: 17
14:42:28:setup_element:INFO: Eye window for uplink 10: ________________________________XXXXX___
Data delay found: 14
14:42:28:setup_element:INFO: Eye window for uplink 11: X___________________________________XXXX
Data delay found: 18
14:42:28:setup_element:INFO: Eye window for uplink 12: ______________________________XXXXX_____
Data delay found: 12
14:42:28:setup_element:INFO: Eye window for uplink 13: _________________________________XXXXX__
Data delay found: 15
14:42:28:setup_element:INFO: Eye window for uplink 14: ______________________________XXXXX_____
Data delay found: 12
14:42:28:setup_element:INFO: Eye window for uplink 15: _______________________________XXXXXX___
Data delay found: 13
14:42:28:setup_element:INFO: Setting the data phase to 12 for uplink 8
14:42:28:setup_element:INFO: Setting the data phase to 17 for uplink 9
14:42:28:setup_element:INFO: Setting the data phase to 14 for uplink 10
14:42:28:setup_element:INFO: Setting the data phase to 18 for uplink 11
14:42:28:setup_element:INFO: Setting the data phase to 12 for uplink 12
14:42:28:setup_element:INFO: Setting the data phase to 15 for uplink 13
14:42:28:setup_element:INFO: Setting the data phase to 12 for uplink 14
14:42:28:setup_element:INFO: Setting the data phase to 13 for uplink 15
14:42:28:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 72
Eye Windows:
Uplink 8: ________________________________________________________________________________
Uplink 9: ________________________________________________________________________________
Uplink 10: ______________________________________________________________________XXXXXXX___
Uplink 11: ______________________________________________________________________XXXXXXX___
Uplink 12: _____________________________________________________________________XXXXXXX____
Uplink 13: _____________________________________________________________________XXXXXXX____
Uplink 14: _____________________________________________________________________XXXXXXX____
Uplink 15: _____________________________________________________________________XXXXXXX____
Data phase characteristics:
Uplink 8:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
Uplink 9:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 10:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 11:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 12:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 13:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 14:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 15:
Optimal Phase: 13
Window Length: 34
Eye Window: _______________________________XXXXXX___
]
14:42:28:setup_element:INFO: Beginning SMX ASICs map scan
14:42:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:42:28:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:42:28:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:42:28:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:42:28:uplink:INFO: Setting uplinks mask [8, 9, 10, 11, 12, 13, 14, 15]
14:42:28:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:42:28:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:42:29:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:42:29:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:42:29:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:42:29:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:42:29:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:42:29:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:42:31:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 72
Eye Windows:
Uplink 8: ________________________________________________________________________________
Uplink 9: ________________________________________________________________________________
Uplink 10: ______________________________________________________________________XXXXXXX___
Uplink 11: ______________________________________________________________________XXXXXXX___
Uplink 12: _____________________________________________________________________XXXXXXX____
Uplink 13: _____________________________________________________________________XXXXXXX____
Uplink 14: _____________________________________________________________________XXXXXXX____
Uplink 15: _____________________________________________________________________XXXXXXX____
Data phase characteristics:
Uplink 8:
Optimal Phase: 12
Window Length: 36
Eye Window: _______________________________XXXX_____
Uplink 9:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 10:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 11:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 12:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 13:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 14:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 15:
Optimal Phase: 13
Window Length: 34
Eye Window: _______________________________XXXXXX___
14:42:31:setup_element:INFO: Performing Elink synchronization
14:42:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:42:31:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:42:31:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:42:31:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:42:31:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:42:31:uplink:INFO: Enabling uplinks [8, 9, 10, 11, 12, 13, 14, 15]
14:42:31:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
14:42:32:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:42:32:febtest:INFO: 08-01 | XA-000-08-002-000-004-066-13 | 28.2 | 1212.7
14:42:32:febtest:INFO: 10-03 | XA-000-08-002-000-004-070-13 | 40.9 | 1183.3
14:42:33:febtest:INFO: 12-05 | XA-000-08-002-000-004-009-08 | 53.6 | 1141.9
14:42:33:febtest:INFO: 14-07 | XA-000-08-002-000-004-013-08 | 28.2 | 1230.3
14:42:33:ST3_smx:INFO: Configuring SMX FAST
14:42:35:ST3_smx:INFO: chip: 8-1 34.556970 C 1195.082160 mV
14:42:35:ST3_smx:INFO: Electrons
14:42:35:ST3_smx:INFO: # loops 0
14:42:37:ST3_smx:INFO: # loops 1
14:42:38:ST3_smx:INFO: # loops 2
14:42:40:ST3_smx:INFO: Total # of broken channels: 0
14:42:40:ST3_smx:INFO: List of broken channels: []
14:42:40:ST3_smx:INFO: Total # of broken channels: 0
14:42:40:ST3_smx:INFO: List of broken channels: []
14:42:41:ST3_smx:INFO: Configuring SMX FAST
14:42:43:ST3_smx:INFO: chip: 10-3 50.430383 C 1147.806000 mV
14:42:43:ST3_smx:INFO: Electrons
14:42:43:ST3_smx:INFO: # loops 0
14:42:45:ST3_smx:INFO: # loops 1
14:42:46:ST3_smx:INFO: # loops 2
14:42:48:ST3_smx:INFO: Total # of broken channels: 0
14:42:48:ST3_smx:INFO: List of broken channels: []
14:42:48:ST3_smx:INFO: Total # of broken channels: 0
14:42:48:ST3_smx:INFO: List of broken channels: []
14:42:49:ST3_smx:INFO: Configuring SMX FAST
14:42:51:ST3_smx:INFO: chip: 12-5 53.612520 C 1153.732915 mV
14:42:51:ST3_smx:INFO: Electrons
14:42:51:ST3_smx:INFO: # loops 0
14:42:52:ST3_smx:INFO: # loops 1
14:42:54:ST3_smx:INFO: # loops 2
14:42:56:ST3_smx:INFO: Total # of broken channels: 0
14:42:56:ST3_smx:INFO: List of broken channels: []
14:42:56:ST3_smx:INFO: Total # of broken channels: 0
14:42:56:ST3_smx:INFO: List of broken channels: []
14:42:57:ST3_smx:INFO: Configuring SMX FAST
14:42:59:ST3_smx:INFO: chip: 14-7 31.389742 C 1224.468235 mV
14:42:59:ST3_smx:INFO: Electrons
14:42:59:ST3_smx:INFO: # loops 0
14:43:00:ST3_smx:INFO: # loops 1
14:43:02:ST3_smx:INFO: # loops 2
14:43:04:ST3_smx:INFO: Total # of broken channels: 0
14:43:04:ST3_smx:INFO: List of broken channels: []
14:43:04:ST3_smx:INFO: Total # of broken channels: 0
14:43:04:ST3_smx:INFO: List of broken channels: []
14:43:04:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:43:05:febtest:INFO: 08-01 | XA-000-08-002-000-004-066-13 | 34.6 | 1201.0
14:43:05:febtest:INFO: 10-03 | XA-000-08-002-000-004-070-13 | 50.4 | 1153.7
14:43:05:febtest:INFO: 12-05 | XA-000-08-002-000-004-009-08 | 50.4 | 1153.7
14:43:05:febtest:INFO: 14-07 | XA-000-08-002-000-004-013-08 | 34.6 | 1224.5
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_42_08
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1119
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.451', '0.9440', '1.851', '1.3970', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '0.9903', '1.850', '0.4377', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '0.9862', '1.850', '0.1616', '0.000', '0.0000', '0.000', '0.0000']
14:43:15:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:45:55:febtest:INFO: FEB type: 8.2
14:45:55:febtest:INFO: FEB SN: 1122
14:45:57:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:45:57:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:45:57:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:45:58:febtest:INFO: Testing FEB with SN 1122
14:46:00:smx_tester:INFO: Scanning setup
14:46:00:elinks:INFO: Disabling clock on downlink 0
14:46:00:elinks:INFO: Disabling clock on downlink 1
14:46:00:elinks:INFO: Disabling clock on downlink 2
14:46:00:elinks:INFO: Disabling clock on downlink 3
14:46:00:elinks:INFO: Disabling clock on downlink 4
14:46:00:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:46:00:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:46:01:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:46:01:elinks:INFO: Disabling clock on downlink 0
14:46:01:elinks:INFO: Disabling clock on downlink 1
14:46:01:elinks:INFO: Disabling clock on downlink 2
14:46:01:elinks:INFO: Disabling clock on downlink 3
14:46:01:elinks:INFO: Disabling clock on downlink 4
14:46:01:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:46:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:46:01:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:46:01:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:46:01:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:46:01:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:46:01:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:46:01:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:46:01:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:46:01:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:46:01:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:46:01:elinks:INFO: Disabling clock on downlink 0
14:46:01:elinks:INFO: Disabling clock on downlink 1
14:46:01:elinks:INFO: Disabling clock on downlink 2
14:46:01:elinks:INFO: Disabling clock on downlink 3
14:46:01:elinks:INFO: Disabling clock on downlink 4
14:46:01:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:46:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:46:01:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:46:01:elinks:INFO: Disabling clock on downlink 0
14:46:01:elinks:INFO: Disabling clock on downlink 1
14:46:01:elinks:INFO: Disabling clock on downlink 2
14:46:01:elinks:INFO: Disabling clock on downlink 3
14:46:01:elinks:INFO: Disabling clock on downlink 4
14:46:01:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:46:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:46:01:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:46:01:elinks:INFO: Disabling clock on downlink 0
14:46:01:elinks:INFO: Disabling clock on downlink 1
14:46:01:elinks:INFO: Disabling clock on downlink 2
14:46:01:elinks:INFO: Disabling clock on downlink 3
14:46:01:elinks:INFO: Disabling clock on downlink 4
14:46:01:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:46:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:46:01:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:46:01:setup_element:INFO: Scanning clock phase
14:46:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:46:01:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:46:02:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:46:02:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:46:02:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:46:02:setup_element:INFO: Eye window for uplink 10: ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
14:46:02:setup_element:INFO: Eye window for uplink 11: ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
14:46:02:setup_element:INFO: Eye window for uplink 12: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:46:02:setup_element:INFO: Eye window for uplink 13: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:46:02:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:46:02:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:46:02:setup_element:INFO: Setting the clock phase to 32 for group 0, downlink 1
14:46:02:setup_element:INFO: Scanning data phases
14:46:02:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:46:02:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:46:07:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:46:07:setup_element:INFO: Eye window for uplink 8 : ____________________________XXXXX_______
Data delay found: 10
14:46:07:setup_element:INFO: Eye window for uplink 9 : _________________________________XXXXXX_
Data delay found: 15
14:46:07:setup_element:INFO: Eye window for uplink 10: ___________________________XXXXXX_______
Data delay found: 9
14:46:07:setup_element:INFO: Eye window for uplink 11: ________________________________XXXX____
Data delay found: 13
14:46:07:setup_element:INFO: Eye window for uplink 12: _______________________________XXXXX____
Data delay found: 13
14:46:07:setup_element:INFO: Eye window for uplink 13: X_________________________________XXXXX_
Data delay found: 17
14:46:07:setup_element:INFO: Eye window for uplink 14: _______________________________XXXXX____
Data delay found: 13
14:46:07:setup_element:INFO: Eye window for uplink 15: _________________________________XXXXXX_
Data delay found: 15
14:46:07:setup_element:INFO: Setting the data phase to 10 for uplink 8
14:46:07:setup_element:INFO: Setting the data phase to 15 for uplink 9
14:46:07:setup_element:INFO: Setting the data phase to 9 for uplink 10
14:46:07:setup_element:INFO: Setting the data phase to 13 for uplink 11
14:46:07:setup_element:INFO: Setting the data phase to 13 for uplink 12
14:46:07:setup_element:INFO: Setting the data phase to 17 for uplink 13
14:46:07:setup_element:INFO: Setting the data phase to 13 for uplink 14
14:46:07:setup_element:INFO: Setting the data phase to 15 for uplink 15
14:46:07:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 70
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ____________________________________________________________________XXXXXXXX____
Uplink 11: ____________________________________________________________________XXXXXXXX____
Uplink 12: _____________________________________________________________________XXXXXXXXX__
Uplink 13: _____________________________________________________________________XXXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXX___
Uplink 15: _______________________________________________________________________XXXXXX___
Data phase characteristics:
Uplink 8:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 9:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 10:
Optimal Phase: 9
Window Length: 34
Eye Window: ___________________________XXXXXX_______
Uplink 11:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 12:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 13:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 14:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 15:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
]
14:46:07:setup_element:INFO: Beginning SMX ASICs map scan
14:46:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:46:07:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:46:07:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:46:07:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:46:07:uplink:INFO: Setting uplinks mask [8, 9, 10, 11, 12, 13, 14, 15]
14:46:07:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:46:07:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:46:08:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:46:08:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:46:08:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:46:08:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:46:08:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:46:08:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:46:10:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 70
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ____________________________________________________________________XXXXXXXX____
Uplink 11: ____________________________________________________________________XXXXXXXX____
Uplink 12: _____________________________________________________________________XXXXXXXXX__
Uplink 13: _____________________________________________________________________XXXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXX___
Uplink 15: _______________________________________________________________________XXXXXX___
Data phase characteristics:
Uplink 8:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 9:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 10:
Optimal Phase: 9
Window Length: 34
Eye Window: ___________________________XXXXXX_______
Uplink 11:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 12:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 13:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 14:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 15:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
14:46:10:setup_element:INFO: Performing Elink synchronization
14:46:10:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:46:10:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:46:10:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:46:10:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:46:10:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:46:10:uplink:INFO: Enabling uplinks [8, 9, 10, 11, 12, 13, 14, 15]
14:46:10:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
14:46:11:smx_tester:INFO: Scanning setup
14:46:11:elinks:INFO: Disabling clock on downlink 0
14:46:11:elinks:INFO: Disabling clock on downlink 1
14:46:11:elinks:INFO: Disabling clock on downlink 2
14:46:11:elinks:INFO: Disabling clock on downlink 3
14:46:11:elinks:INFO: Disabling clock on downlink 4
14:46:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:46:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:46:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:46:11:elinks:INFO: Disabling clock on downlink 0
14:46:11:elinks:INFO: Disabling clock on downlink 1
14:46:11:elinks:INFO: Disabling clock on downlink 2
14:46:11:elinks:INFO: Disabling clock on downlink 3
14:46:11:elinks:INFO: Disabling clock on downlink 4
14:46:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:46:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:46:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:46:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:46:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:46:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:46:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:46:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:46:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:46:11:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:46:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:46:11:elinks:INFO: Disabling clock on downlink 0
14:46:11:elinks:INFO: Disabling clock on downlink 1
14:46:11:elinks:INFO: Disabling clock on downlink 2
14:46:11:elinks:INFO: Disabling clock on downlink 3
14:46:11:elinks:INFO: Disabling clock on downlink 4
14:46:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:46:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:46:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:46:11:elinks:INFO: Disabling clock on downlink 0
14:46:11:elinks:INFO: Disabling clock on downlink 1
14:46:11:elinks:INFO: Disabling clock on downlink 2
14:46:11:elinks:INFO: Disabling clock on downlink 3
14:46:11:elinks:INFO: Disabling clock on downlink 4
14:46:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:46:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:46:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:46:11:elinks:INFO: Disabling clock on downlink 0
14:46:11:elinks:INFO: Disabling clock on downlink 1
14:46:11:elinks:INFO: Disabling clock on downlink 2
14:46:11:elinks:INFO: Disabling clock on downlink 3
14:46:11:elinks:INFO: Disabling clock on downlink 4
14:46:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:46:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:46:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:46:11:setup_element:INFO: Scanning clock phase
14:46:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:46:12:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:46:12:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:46:12:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:46:12:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:46:12:setup_element:INFO: Eye window for uplink 10: ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
14:46:12:setup_element:INFO: Eye window for uplink 11: ____________________________________________________________________XXXXXXXX____
Clock Delay: 31
14:46:12:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:46:12:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:46:12:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:46:12:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:46:12:setup_element:INFO: Setting the clock phase to 32 for group 0, downlink 1
14:46:12:setup_element:INFO: Scanning data phases
14:46:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:46:12:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:46:17:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:46:17:setup_element:INFO: Eye window for uplink 8 : ____________________________XXXXX_______
Data delay found: 10
14:46:17:setup_element:INFO: Eye window for uplink 9 : _________________________________XXXXXX_
Data delay found: 15
14:46:17:setup_element:INFO: Eye window for uplink 10: ____________________________XXXXX_______
Data delay found: 10
14:46:17:setup_element:INFO: Eye window for uplink 11: ________________________________XXXXX___
Data delay found: 14
14:46:17:setup_element:INFO: Eye window for uplink 12: _______________________________XXXXX____
Data delay found: 13
14:46:17:setup_element:INFO: Eye window for uplink 13: __________________________________XXXXX_
Data delay found: 16
14:46:17:setup_element:INFO: Eye window for uplink 14: _______________________________XXXXX____
Data delay found: 13
14:46:17:setup_element:INFO: Eye window for uplink 15: _________________________________XXXXX__
Data delay found: 15
14:46:17:setup_element:INFO: Setting the data phase to 10 for uplink 8
14:46:17:setup_element:INFO: Setting the data phase to 15 for uplink 9
14:46:17:setup_element:INFO: Setting the data phase to 10 for uplink 10
14:46:17:setup_element:INFO: Setting the data phase to 14 for uplink 11
14:46:17:setup_element:INFO: Setting the data phase to 13 for uplink 12
14:46:17:setup_element:INFO: Setting the data phase to 16 for uplink 13
14:46:17:setup_element:INFO: Setting the data phase to 13 for uplink 14
14:46:17:setup_element:INFO: Setting the data phase to 15 for uplink 15
14:46:17:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 70
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXX____
Uplink 9: _____________________________________________________________________XXXXXXX____
Uplink 10: ____________________________________________________________________XXXXXXXX____
Uplink 11: ____________________________________________________________________XXXXXXXX____
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXX___
Uplink 15: _______________________________________________________________________XXXXXX___
Data phase characteristics:
Uplink 8:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 9:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 10:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 11:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 12:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 13:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 14:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 15:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
]
14:46:17:setup_element:INFO: Beginning SMX ASICs map scan
14:46:17:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:46:17:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:46:17:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:46:17:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:46:17:uplink:INFO: Setting uplinks mask [8, 9, 10, 11, 12, 13, 14, 15]
14:46:18:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:46:18:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:46:18:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:46:18:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:46:18:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:46:18:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:46:19:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:46:19:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:46:20:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 70
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXX____
Uplink 9: _____________________________________________________________________XXXXXXX____
Uplink 10: ____________________________________________________________________XXXXXXXX____
Uplink 11: ____________________________________________________________________XXXXXXXX____
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXX___
Uplink 15: _______________________________________________________________________XXXXXX___
Data phase characteristics:
Uplink 8:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 9:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 10:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 11:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 12:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 13:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 14:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 15:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
14:46:20:setup_element:INFO: Performing Elink synchronization
14:46:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:46:20:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:46:20:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:46:20:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:46:20:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:46:20:uplink:INFO: Enabling uplinks [8, 9, 10, 11, 12, 13, 14, 15]
14:46:20:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
14:46:21:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:46:21:febtest:INFO: 08-01 | XA-000-08-002-000-004-072-13 | 34.6 | 1189.2
14:46:22:febtest:INFO: 10-03 | XA-000-08-002-000-004-076-13 | 25.1 | 1230.3
14:46:22:febtest:INFO: 12-05 | XA-000-08-002-000-004-081-10 | 34.6 | 1195.1
14:46:22:febtest:INFO: 14-07 | XA-000-08-002-000-004-071-13 | 40.9 | 1189.2
14:46:22:ST3_smx:INFO: Configuring SMX FAST
14:46:24:ST3_smx:INFO: chip: 8-1 31.389742 C 1200.969315 mV
14:46:24:ST3_smx:INFO: Electrons
14:46:24:ST3_smx:INFO: # loops 0
14:46:26:ST3_smx:INFO: # loops 1
14:46:28:ST3_smx:INFO: # loops 2
14:46:29:ST3_smx:INFO: Total # of broken channels: 0
14:46:29:ST3_smx:INFO: List of broken channels: []
14:46:29:ST3_smx:INFO: Total # of broken channels: 0
14:46:29:ST3_smx:INFO: List of broken channels: []
14:46:30:ST3_smx:INFO: Configuring SMX FAST
14:46:32:ST3_smx:INFO: chip: 10-3 31.389742 C 1224.468235 mV
14:46:32:ST3_smx:INFO: Electrons
14:46:32:ST3_smx:INFO: # loops 0
14:46:34:ST3_smx:INFO: # loops 1
14:46:35:ST3_smx:INFO: # loops 2
14:46:37:ST3_smx:INFO: Total # of broken channels: 0
14:46:37:ST3_smx:INFO: List of broken channels: []
14:46:37:ST3_smx:INFO: Total # of broken channels: 0
14:46:37:ST3_smx:INFO: List of broken channels: []
14:46:38:ST3_smx:INFO: Configuring SMX FAST
14:46:40:ST3_smx:INFO: chip: 12-5 31.389742 C 1218.600960 mV
14:46:40:ST3_smx:INFO: Electrons
14:46:40:ST3_smx:INFO: # loops 0
14:46:41:ST3_smx:INFO: # loops 1
14:46:43:ST3_smx:INFO: # loops 2
14:46:44:ST3_smx:INFO: Total # of broken channels: 0
14:46:44:ST3_smx:INFO: List of broken channels: []
14:46:44:ST3_smx:INFO: Total # of broken channels: 0
14:46:44:ST3_smx:INFO: List of broken channels: []
14:46:45:ST3_smx:INFO: Configuring SMX FAST
14:46:47:ST3_smx:INFO: chip: 14-7 40.898880 C 1189.190035 mV
14:46:47:ST3_smx:INFO: Electrons
14:46:47:ST3_smx:INFO: # loops 0
14:46:49:ST3_smx:INFO: # loops 1
14:46:51:ST3_smx:INFO: # loops 2
14:46:52:ST3_smx:INFO: Total # of broken channels: 0
14:46:52:ST3_smx:INFO: List of broken channels: []
14:46:52:ST3_smx:INFO: Total # of broken channels: 0
14:46:52:ST3_smx:INFO: List of broken channels: []
14:46:53:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:46:53:febtest:INFO: 08-01 | XA-000-08-002-000-004-072-13 | 34.6 | 1206.9
14:46:54:febtest:INFO: 10-03 | XA-000-08-002-000-004-076-13 | 31.4 | 1224.5
14:46:54:febtest:INFO: 12-05 | XA-000-08-002-000-004-081-10 | 31.4 | 1218.6
14:46:54:febtest:INFO: 14-07 | XA-000-08-002-000-004-071-13 | 40.9 | 1189.2
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_45_57
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1122
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.451', '0.9982', '1.850', '1.5160', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '0.9977', '1.850', '0.3462', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '0.9929', '1.850', '0.1622', '0.000', '0.0000', '0.000', '0.0000']
14:46:58:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:48:37:febtest:INFO: FEB type: 8.2
14:48:37:febtest:INFO: FEB SN: 2115
14:48:40:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:48:40:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:48:40:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:48:40:febtest:INFO: Testing FEB with SN 2115
14:48:43:smx_tester:INFO: Scanning setup
14:48:43:elinks:INFO: Disabling clock on downlink 0
14:48:43:elinks:INFO: Disabling clock on downlink 1
14:48:43:elinks:INFO: Disabling clock on downlink 2
14:48:43:elinks:INFO: Disabling clock on downlink 3
14:48:43:elinks:INFO: Disabling clock on downlink 4
14:48:43:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:48:43:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:48:43:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:48:43:elinks:INFO: Disabling clock on downlink 0
14:48:43:elinks:INFO: Disabling clock on downlink 1
14:48:43:elinks:INFO: Disabling clock on downlink 2
14:48:43:elinks:INFO: Disabling clock on downlink 3
14:48:43:elinks:INFO: Disabling clock on downlink 4
14:48:43:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:48:43:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:48:43:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:48:43:elinks:INFO: Disabling clock on downlink 0
14:48:43:elinks:INFO: Disabling clock on downlink 1
14:48:43:elinks:INFO: Disabling clock on downlink 2
14:48:43:elinks:INFO: Disabling clock on downlink 3
14:48:43:elinks:INFO: Disabling clock on downlink 4
14:48:43:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:48:43:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:48:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:48:43:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:48:44:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:48:44:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:48:44:elinks:INFO: Disabling clock on downlink 0
14:48:44:elinks:INFO: Disabling clock on downlink 1
14:48:44:elinks:INFO: Disabling clock on downlink 2
14:48:44:elinks:INFO: Disabling clock on downlink 3
14:48:44:elinks:INFO: Disabling clock on downlink 4
14:48:44:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:48:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:48:44:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:48:44:elinks:INFO: Disabling clock on downlink 0
14:48:44:elinks:INFO: Disabling clock on downlink 1
14:48:44:elinks:INFO: Disabling clock on downlink 2
14:48:44:elinks:INFO: Disabling clock on downlink 3
14:48:44:elinks:INFO: Disabling clock on downlink 4
14:48:44:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:48:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:48:44:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:48:44:setup_element:INFO: Scanning clock phase
14:48:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:48:44:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:48:44:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:48:44:setup_element:INFO: Eye window for uplink 16: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:48:44:setup_element:INFO: Eye window for uplink 17: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:48:44:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:44:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:44:setup_element:INFO: Eye window for uplink 22: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:48:44:setup_element:INFO: Eye window for uplink 23: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:48:44:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:48:44:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:48:44:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:44:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:44:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:44:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:44:setup_element:INFO: Eye window for uplink 30: X________________________________________________________________________XXXXXXX
Clock Delay: 36
14:48:44:setup_element:INFO: Eye window for uplink 31: X________________________________________________________________________XXXXXXX
Clock Delay: 36
14:48:44:setup_element:INFO: Setting the clock phase to 35 for group 0, downlink 2
14:48:44:setup_element:INFO: Scanning data phases
14:48:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:48:44:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:48:50:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:48:50:setup_element:INFO: Eye window for uplink 16: ___________________________________XXXX_
Data delay found: 16
14:48:50:setup_element:INFO: Eye window for uplink 17: ______________________________XXXXX_____
Data delay found: 12
14:48:50:setup_element:INFO: Eye window for uplink 18: XX__________________________________XXXX
Data delay found: 18
14:48:50:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXX__
Data delay found: 15
14:48:50:setup_element:INFO: Eye window for uplink 22: __________________________________XXXXX_
Data delay found: 16
14:48:50:setup_element:INFO: Eye window for uplink 23: ________________________________XXXXX___
Data delay found: 14
14:48:50:setup_element:INFO: Eye window for uplink 24: ___XXXXXX_______________________________
Data delay found: 25
14:48:50:setup_element:INFO: Eye window for uplink 25: ______XXXXX_____________________________
Data delay found: 28
14:48:50:setup_element:INFO: Eye window for uplink 26: _______XXXXXX___________________________
Data delay found: 29
14:48:50:setup_element:INFO: Eye window for uplink 27: ___________XXXX_________________________
Data delay found: 32
14:48:50:setup_element:INFO: Eye window for uplink 28: __________XXXXX_________________________
Data delay found: 32
14:48:50:setup_element:INFO: Eye window for uplink 29: ___________XXXXXX_______________________
Data delay found: 33
14:48:50:setup_element:INFO: Eye window for uplink 30: ________________XXXXX___________________
Data delay found: 38
14:48:50:setup_element:INFO: Eye window for uplink 31: ______________XXXXX_____________________
Data delay found: 36
14:48:50:setup_element:INFO: Setting the data phase to 16 for uplink 16
14:48:50:setup_element:INFO: Setting the data phase to 12 for uplink 17
14:48:50:setup_element:INFO: Setting the data phase to 18 for uplink 18
14:48:50:setup_element:INFO: Setting the data phase to 15 for uplink 19
14:48:50:setup_element:INFO: Setting the data phase to 16 for uplink 22
14:48:50:setup_element:INFO: Setting the data phase to 14 for uplink 23
14:48:50:setup_element:INFO: Setting the data phase to 25 for uplink 24
14:48:50:setup_element:INFO: Setting the data phase to 28 for uplink 25
14:48:50:setup_element:INFO: Setting the data phase to 29 for uplink 26
14:48:50:setup_element:INFO: Setting the data phase to 32 for uplink 27
14:48:50:setup_element:INFO: Setting the data phase to 32 for uplink 28
14:48:50:setup_element:INFO: Setting the data phase to 33 for uplink 29
14:48:50:setup_element:INFO: Setting the data phase to 38 for uplink 30
14:48:50:setup_element:INFO: Setting the data phase to 36 for uplink 31
14:48:50:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 69
Eye Windows:
Uplink 16: ______________________________________________________________________XXXXXXXX__
Uplink 17: ______________________________________________________________________XXXXXXXX__
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 22: ________________________________________________________________________XXXXXXX_
Uplink 23: ________________________________________________________________________XXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: X________________________________________________________________________XXXXXXX
Uplink 31: X________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 17:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 22:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 24:
Optimal Phase: 25
Window Length: 34
Eye Window: ___XXXXXX_______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 26:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 27:
Optimal Phase: 32
Window Length: 36
Eye Window: ___________XXXX_________________________
Uplink 28:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 30:
Optimal Phase: 38
Window Length: 35
Eye Window: ________________XXXXX___________________
Uplink 31:
Optimal Phase: 36
Window Length: 35
Eye Window: ______________XXXXX_____________________
]
14:48:50:setup_element:INFO: Beginning SMX ASICs map scan
14:48:50:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:48:50:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:48:50:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:48:50:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:48:50:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:48:50:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:48:50:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:48:50:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:48:50:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:48:50:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:48:50:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:48:51:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:48:51:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:48:51:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:48:51:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:48:51:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:48:51:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:48:51:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:48:51:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:48:52:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 69
Eye Windows:
Uplink 16: ______________________________________________________________________XXXXXXXX__
Uplink 17: ______________________________________________________________________XXXXXXXX__
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 22: ________________________________________________________________________XXXXXXX_
Uplink 23: ________________________________________________________________________XXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: X________________________________________________________________________XXXXXXX
Uplink 31: X________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 17:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 22:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 24:
Optimal Phase: 25
Window Length: 34
Eye Window: ___XXXXXX_______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 26:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 27:
Optimal Phase: 32
Window Length: 36
Eye Window: ___________XXXX_________________________
Uplink 28:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 30:
Optimal Phase: 38
Window Length: 35
Eye Window: ________________XXXXX___________________
Uplink 31:
Optimal Phase: 36
Window Length: 35
Eye Window: ______________XXXXX_____________________
14:48:53:setup_element:INFO: Performing Elink synchronization
14:48:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:48:53:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:48:53:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:48:53:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:48:53:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:48:53:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:48:53:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
14:48:53:smx_tester:INFO: Scanning setup
14:48:53:elinks:INFO: Disabling clock on downlink 0
14:48:53:elinks:INFO: Disabling clock on downlink 1
14:48:53:elinks:INFO: Disabling clock on downlink 2
14:48:53:elinks:INFO: Disabling clock on downlink 3
14:48:53:elinks:INFO: Disabling clock on downlink 4
14:48:53:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:48:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:48:53:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:48:53:elinks:INFO: Disabling clock on downlink 0
14:48:53:elinks:INFO: Disabling clock on downlink 1
14:48:53:elinks:INFO: Disabling clock on downlink 2
14:48:53:elinks:INFO: Disabling clock on downlink 3
14:48:53:elinks:INFO: Disabling clock on downlink 4
14:48:53:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:48:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:48:54:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:48:54:elinks:INFO: Disabling clock on downlink 0
14:48:54:elinks:INFO: Disabling clock on downlink 1
14:48:54:elinks:INFO: Disabling clock on downlink 2
14:48:54:elinks:INFO: Disabling clock on downlink 3
14:48:54:elinks:INFO: Disabling clock on downlink 4
14:48:54:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:48:54:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:48:54:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:48:54:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:48:54:elinks:INFO: Disabling clock on downlink 0
14:48:54:elinks:INFO: Disabling clock on downlink 1
14:48:54:elinks:INFO: Disabling clock on downlink 2
14:48:54:elinks:INFO: Disabling clock on downlink 3
14:48:54:elinks:INFO: Disabling clock on downlink 4
14:48:54:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:48:54:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:48:54:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:48:54:elinks:INFO: Disabling clock on downlink 0
14:48:54:elinks:INFO: Disabling clock on downlink 1
14:48:54:elinks:INFO: Disabling clock on downlink 2
14:48:54:elinks:INFO: Disabling clock on downlink 3
14:48:54:elinks:INFO: Disabling clock on downlink 4
14:48:54:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:48:54:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:48:54:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:48:54:setup_element:INFO: Scanning clock phase
14:48:54:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:48:54:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:48:54:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:48:54:setup_element:INFO: Eye window for uplink 16: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:48:54:setup_element:INFO: Eye window for uplink 17: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:48:54:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:54:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:54:setup_element:INFO: Eye window for uplink 22: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:54:setup_element:INFO: Eye window for uplink 23: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:54:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:48:54:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:48:54:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:54:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:54:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:54:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:48:54:setup_element:INFO: Eye window for uplink 30: X_________________________________________________________________________XXXXXX
Clock Delay: 37
14:48:54:setup_element:INFO: Eye window for uplink 31: X_________________________________________________________________________XXXXXX
Clock Delay: 37
14:48:54:setup_element:INFO: Setting the clock phase to 35 for group 0, downlink 2
14:48:54:setup_element:INFO: Scanning data phases
14:48:54:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:48:55:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:49:00:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:49:00:setup_element:INFO: Eye window for uplink 16: __________________________________XXXX__
Data delay found: 15
14:49:00:setup_element:INFO: Eye window for uplink 17: ______________________________XXXXX_____
Data delay found: 12
14:49:00:setup_element:INFO: Eye window for uplink 18: XX__________________________________XXXX
Data delay found: 18
14:49:00:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXX__
Data delay found: 15
14:49:00:setup_element:INFO: Eye window for uplink 22: _________________________________XXXXXX_
Data delay found: 15
14:49:00:setup_element:INFO: Eye window for uplink 23: ________________________________XXXXX___
Data delay found: 14
14:49:00:setup_element:INFO: Eye window for uplink 24: ___XXXXX________________________________
Data delay found: 25
14:49:00:setup_element:INFO: Eye window for uplink 25: ______XXXXX_____________________________
Data delay found: 28
14:49:00:setup_element:INFO: Eye window for uplink 26: _______XXXXX____________________________
Data delay found: 29
14:49:00:setup_element:INFO: Eye window for uplink 27: ___________XXXXX________________________
Data delay found: 33
14:49:00:setup_element:INFO: Eye window for uplink 28: _________XXXXXX_________________________
Data delay found: 31
14:49:00:setup_element:INFO: Eye window for uplink 29: ___________XXXXX________________________
Data delay found: 33
14:49:00:setup_element:INFO: Eye window for uplink 30: _______________XXXXXX___________________
Data delay found: 37
14:49:00:setup_element:INFO: Eye window for uplink 31: _____________XXXXXX_____________________
Data delay found: 35
14:49:00:setup_element:INFO: Setting the data phase to 15 for uplink 16
14:49:00:setup_element:INFO: Setting the data phase to 12 for uplink 17
14:49:00:setup_element:INFO: Setting the data phase to 18 for uplink 18
14:49:00:setup_element:INFO: Setting the data phase to 15 for uplink 19
14:49:00:setup_element:INFO: Setting the data phase to 15 for uplink 22
14:49:00:setup_element:INFO: Setting the data phase to 14 for uplink 23
14:49:00:setup_element:INFO: Setting the data phase to 25 for uplink 24
14:49:00:setup_element:INFO: Setting the data phase to 28 for uplink 25
14:49:00:setup_element:INFO: Setting the data phase to 29 for uplink 26
14:49:00:setup_element:INFO: Setting the data phase to 33 for uplink 27
14:49:00:setup_element:INFO: Setting the data phase to 31 for uplink 28
14:49:00:setup_element:INFO: Setting the data phase to 33 for uplink 29
14:49:00:setup_element:INFO: Setting the data phase to 37 for uplink 30
14:49:00:setup_element:INFO: Setting the data phase to 35 for uplink 31
14:49:00:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 69
Eye Windows:
Uplink 16: ______________________________________________________________________XXXXXXXX__
Uplink 17: ______________________________________________________________________XXXXXXXX__
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 22: _______________________________________________________________________XXXXXXXX_
Uplink 23: _______________________________________________________________________XXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: X_________________________________________________________________________XXXXXX
Uplink 31: X_________________________________________________________________________XXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 17:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 22:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 24:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 25:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 26:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 30:
Optimal Phase: 37
Window Length: 34
Eye Window: _______________XXXXXX___________________
Uplink 31:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
]
14:49:00:setup_element:INFO: Beginning SMX ASICs map scan
14:49:00:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:49:00:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:49:00:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:49:00:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:49:00:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:49:00:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
14:49:00:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
14:49:00:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:49:00:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:49:01:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:49:01:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:49:01:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:49:01:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:49:01:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:49:01:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:49:01:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:49:01:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:49:01:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:49:01:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:49:03:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 69
Eye Windows:
Uplink 16: ______________________________________________________________________XXXXXXXX__
Uplink 17: ______________________________________________________________________XXXXXXXX__
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 22: _______________________________________________________________________XXXXXXXX_
Uplink 23: _______________________________________________________________________XXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: X_________________________________________________________________________XXXXXX
Uplink 31: X_________________________________________________________________________XXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 17:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 22:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 24:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 25:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 26:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 30:
Optimal Phase: 37
Window Length: 34
Eye Window: _______________XXXXXX___________________
Uplink 31:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
14:49:03:setup_element:INFO: Performing Elink synchronization
14:49:03:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:49:03:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:49:03:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:49:03:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:49:03:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:49:03:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
14:49:03:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:49:04:febtest:ERROR: HW addres 3 != 2
14:49:11:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:49:11:febtest:INFO: 23-00 | XA-000-08-002-000-004-204-07 | 44.1 | 1177.4
14:49:11:febtest:INFO: 30-01 | XA-000-08-002-000-002-158-00 | 25.1 | 1259.6
14:49:11:febtest:INFO: 28-03 | XA-000-08-002-000-002-157-00 | 47.3 | 1165.6
14:49:11:febtest:INFO: 19-04 | XA-000-08-002-000-003-080-02 | 31.4 | 1224.5
14:49:12:febtest:INFO: 26-05 | XA-000-08-002-000-003-079-05 | 31.4 | 1218.6
14:49:12:febtest:INFO: 17-06 | XA-000-08-002-000-004-125-04 | 44.1 | 1177.4
14:49:12:febtest:INFO: 24-07 | XA-000-08-002-000-004-203-07 | 37.7 | 1195.1
14:49:12:ST3_smx:INFO: Configuring SMX FAST
14:49:14:ST3_smx:INFO: chip: 23-0 37.726682 C 1200.969315 mV
14:49:14:ST3_smx:INFO: Electrons
14:49:14:ST3_smx:INFO: # loops 0
14:49:16:ST3_smx:INFO: # loops 1
14:49:17:ST3_smx:INFO: # loops 2
14:49:19:ST3_smx:INFO: Total # of broken channels: 0
14:49:19:ST3_smx:INFO: List of broken channels: []
14:49:19:ST3_smx:INFO: Total # of broken channels: 0
14:49:19:ST3_smx:INFO: List of broken channels: []
14:49:20:ST3_smx:INFO: Configuring SMX FAST
14:49:22:ST3_smx:INFO: chip: 30-1 21.902970 C 1271.227515 mV
14:49:22:ST3_smx:INFO: Electrons
14:49:22:ST3_smx:INFO: # loops 0
14:49:24:ST3_smx:INFO: # loops 1
14:49:25:ST3_smx:INFO: # loops 2
14:49:27:ST3_smx:INFO: Total # of broken channels: 0
14:49:27:ST3_smx:INFO: List of broken channels: []
14:49:27:ST3_smx:INFO: Total # of broken channels: 0
14:49:27:ST3_smx:INFO: List of broken channels: []
14:49:28:ST3_smx:INFO: Configuring SMX FAST
14:49:30:ST3_smx:INFO: chip: 28-3 47.250730 C 1177.390875 mV
14:49:30:ST3_smx:INFO: Electrons
14:49:30:ST3_smx:INFO: # loops 0
14:49:32:ST3_smx:INFO: # loops 1
14:49:33:ST3_smx:INFO: # loops 2
14:49:35:ST3_smx:INFO: Total # of broken channels: 0
14:49:35:ST3_smx:INFO: List of broken channels: []
14:49:35:ST3_smx:INFO: Total # of broken channels: 0
14:49:35:ST3_smx:INFO: List of broken channels: []
14:49:36:ST3_smx:INFO: Configuring SMX FAST
14:49:38:ST3_smx:INFO: chip: 19-4 31.389742 C 1230.330540 mV
14:49:38:ST3_smx:INFO: Electrons
14:49:38:ST3_smx:INFO: # loops 0
14:49:39:ST3_smx:INFO: # loops 1
14:49:41:ST3_smx:INFO: # loops 2
14:49:43:ST3_smx:INFO: Total # of broken channels: 0
14:49:43:ST3_smx:INFO: List of broken channels: []
14:49:43:ST3_smx:INFO: Total # of broken channels: 0
14:49:43:ST3_smx:INFO: List of broken channels: []
14:49:44:ST3_smx:INFO: Configuring SMX FAST
14:49:46:ST3_smx:INFO: chip: 26-5 34.556970 C 1212.728715 mV
14:49:46:ST3_smx:INFO: Electrons
14:49:46:ST3_smx:INFO: # loops 0
14:49:47:ST3_smx:INFO: # loops 1
14:49:49:ST3_smx:INFO: # loops 2
14:49:51:ST3_smx:INFO: Total # of broken channels: 0
14:49:51:ST3_smx:INFO: List of broken channels: []
14:49:51:ST3_smx:INFO: Total # of broken channels: 0
14:49:51:ST3_smx:INFO: List of broken channels: []
14:49:52:ST3_smx:INFO: Configuring SMX FAST
14:49:54:ST3_smx:INFO: chip: 17-6 47.250730 C 1159.654860 mV
14:49:54:ST3_smx:INFO: Electrons
14:49:54:ST3_smx:INFO: # loops 0
14:49:55:ST3_smx:INFO: # loops 1
14:49:57:ST3_smx:INFO: # loops 2
14:49:59:ST3_smx:INFO: Total # of broken channels: 0
14:49:59:ST3_smx:INFO: List of broken channels: []
14:49:59:ST3_smx:INFO: Total # of broken channels: 0
14:49:59:ST3_smx:INFO: List of broken channels: []
14:49:59:ST3_smx:INFO: Configuring SMX FAST
14:50:01:ST3_smx:INFO: chip: 24-7 47.250730 C 1177.390875 mV
14:50:01:ST3_smx:INFO: Electrons
14:50:01:ST3_smx:INFO: # loops 0
14:50:03:ST3_smx:INFO: # loops 1
14:50:05:ST3_smx:INFO: # loops 2
14:50:06:ST3_smx:INFO: Total # of broken channels: 0
14:50:06:ST3_smx:INFO: List of broken channels: []
14:50:06:ST3_smx:INFO: Total # of broken channels: 0
14:50:06:ST3_smx:INFO: List of broken channels: []
14:50:07:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:50:08:febtest:INFO: 23-00 | XA-000-08-002-000-004-204-07 | 40.9 | 1201.0
14:50:08:febtest:INFO: 30-01 | XA-000-08-002-000-002-158-00 | 25.1 | 1271.2
14:50:08:febtest:INFO: 28-03 | XA-000-08-002-000-002-157-00 | 47.3 | 1177.4
14:50:08:febtest:INFO: 19-04 | XA-000-08-002-000-003-080-02 | 31.4 | 1230.3
14:50:08:febtest:INFO: 26-05 | XA-000-08-002-000-003-079-05 | 34.6 | 1212.7
14:50:09:febtest:INFO: 17-06 | XA-000-08-002-000-004-125-04 | 47.3 | 1159.7
14:50:09:febtest:INFO: 24-07 | XA-000-08-002-000-004-203-07 | 47.3 | 1171.5
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_48_40
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2115
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.5430', '1.850', '2.3790']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9350', '1.850', '0.5666']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9300', '1.850', '0.5558']
14:50:16:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:51:34:febtest:INFO: FEB type: 8.2
14:51:34:febtest:INFO: FEB SN: 2120
14:51:38:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:51:38:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:51:38:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:51:39:febtest:INFO: Testing FEB with SN 2120
14:51:41:smx_tester:INFO: Scanning setup
14:51:41:elinks:INFO: Disabling clock on downlink 0
14:51:41:elinks:INFO: Disabling clock on downlink 1
14:51:41:elinks:INFO: Disabling clock on downlink 2
14:51:41:elinks:INFO: Disabling clock on downlink 3
14:51:41:elinks:INFO: Disabling clock on downlink 4
14:51:41:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:51:41:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:51:41:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:51:41:elinks:INFO: Disabling clock on downlink 0
14:51:41:elinks:INFO: Disabling clock on downlink 1
14:51:41:elinks:INFO: Disabling clock on downlink 2
14:51:41:elinks:INFO: Disabling clock on downlink 3
14:51:41:elinks:INFO: Disabling clock on downlink 4
14:51:41:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:51:41:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:51:42:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:51:42:elinks:INFO: Disabling clock on downlink 0
14:51:42:elinks:INFO: Disabling clock on downlink 1
14:51:42:elinks:INFO: Disabling clock on downlink 2
14:51:42:elinks:INFO: Disabling clock on downlink 3
14:51:42:elinks:INFO: Disabling clock on downlink 4
14:51:42:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:51:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:51:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:51:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:51:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:51:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:51:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:51:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:51:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:51:42:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:51:42:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:51:42:elinks:INFO: Disabling clock on downlink 0
14:51:42:elinks:INFO: Disabling clock on downlink 1
14:51:42:elinks:INFO: Disabling clock on downlink 2
14:51:42:elinks:INFO: Disabling clock on downlink 3
14:51:42:elinks:INFO: Disabling clock on downlink 4
14:51:42:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:51:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:51:42:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:51:42:elinks:INFO: Disabling clock on downlink 0
14:51:42:elinks:INFO: Disabling clock on downlink 1
14:51:42:elinks:INFO: Disabling clock on downlink 2
14:51:42:elinks:INFO: Disabling clock on downlink 3
14:51:42:elinks:INFO: Disabling clock on downlink 4
14:51:42:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:51:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:51:42:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:51:42:setup_element:INFO: Scanning clock phase
14:51:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:51:42:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:51:42:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:51:42:setup_element:INFO: Eye window for uplink 24: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:51:42:setup_element:INFO: Eye window for uplink 25: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:51:42:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:51:42:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:51:42:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:51:42:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:51:42:setup_element:INFO: Eye window for uplink 30: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:51:42:setup_element:INFO: Eye window for uplink 31: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:51:42:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:51:42:setup_element:INFO: Scanning data phases
14:51:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:51:42:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:51:48:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:51:48:setup_element:INFO: Eye window for uplink 24: ____XXXXXX______________________________
Data delay found: 26
14:51:48:setup_element:INFO: Eye window for uplink 25: ______XXXXXX____________________________
Data delay found: 28
14:51:48:setup_element:INFO: Eye window for uplink 26: ______XXXXX_____________________________
Data delay found: 28
14:51:48:setup_element:INFO: Eye window for uplink 27: _________XXXXXX_________________________
Data delay found: 31
14:51:48:setup_element:INFO: Eye window for uplink 28: ___________XXXXXX_______________________
Data delay found: 33
14:51:48:setup_element:INFO: Eye window for uplink 29: _____________XXXXXX_____________________
Data delay found: 35
14:51:48:setup_element:INFO: Eye window for uplink 30: ____________XXXXXX______________________
Data delay found: 34
14:51:48:setup_element:INFO: Eye window for uplink 31: __________XXXXXX________________________
Data delay found: 32
14:51:48:setup_element:INFO: Setting the data phase to 26 for uplink 24
14:51:48:setup_element:INFO: Setting the data phase to 28 for uplink 25
14:51:48:setup_element:INFO: Setting the data phase to 28 for uplink 26
14:51:48:setup_element:INFO: Setting the data phase to 31 for uplink 27
14:51:48:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:51:48:setup_element:INFO: Setting the data phase to 35 for uplink 29
14:51:48:setup_element:INFO: Setting the data phase to 34 for uplink 30
14:51:48:setup_element:INFO: Setting the data phase to 32 for uplink 31
14:51:48:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 71
Eye Windows:
Uplink 24: ______________________________________________________________________XXXXXXXX__
Uplink 25: ______________________________________________________________________XXXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: ______________________________________________________________________XXXXXXXXX_
Uplink 31: ______________________________________________________________________XXXXXXXXX_
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 30:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 31:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
]
14:51:48:setup_element:INFO: Beginning SMX ASICs map scan
14:51:48:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:51:48:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:51:48:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:51:48:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:51:48:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
14:51:48:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:51:48:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:51:48:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:51:48:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:51:49:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:51:49:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:51:49:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:51:49:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:51:50:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 71
Eye Windows:
Uplink 24: ______________________________________________________________________XXXXXXXX__
Uplink 25: ______________________________________________________________________XXXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: ______________________________________________________________________XXXXXXXXX_
Uplink 31: ______________________________________________________________________XXXXXXXXX_
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 30:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 31:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
14:51:50:setup_element:INFO: Performing Elink synchronization
14:51:50:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:51:50:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:51:50:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:51:50:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:51:50:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:51:50:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
14:51:50:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
14:51:51:smx_tester:INFO: Scanning setup
14:51:51:elinks:INFO: Disabling clock on downlink 0
14:51:51:elinks:INFO: Disabling clock on downlink 1
14:51:51:elinks:INFO: Disabling clock on downlink 2
14:51:51:elinks:INFO: Disabling clock on downlink 3
14:51:51:elinks:INFO: Disabling clock on downlink 4
14:51:51:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:51:51:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:51:51:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:51:51:elinks:INFO: Disabling clock on downlink 0
14:51:51:elinks:INFO: Disabling clock on downlink 1
14:51:51:elinks:INFO: Disabling clock on downlink 2
14:51:51:elinks:INFO: Disabling clock on downlink 3
14:51:51:elinks:INFO: Disabling clock on downlink 4
14:51:51:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:51:51:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:51:51:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:51:51:elinks:INFO: Disabling clock on downlink 0
14:51:51:elinks:INFO: Disabling clock on downlink 1
14:51:51:elinks:INFO: Disabling clock on downlink 2
14:51:51:elinks:INFO: Disabling clock on downlink 3
14:51:51:elinks:INFO: Disabling clock on downlink 4
14:51:51:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:51:51:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:51:51:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:51:51:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:51:51:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:51:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:51:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:51:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:51:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:51:52:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:51:52:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:51:52:elinks:INFO: Disabling clock on downlink 0
14:51:52:elinks:INFO: Disabling clock on downlink 1
14:51:52:elinks:INFO: Disabling clock on downlink 2
14:51:52:elinks:INFO: Disabling clock on downlink 3
14:51:52:elinks:INFO: Disabling clock on downlink 4
14:51:52:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:51:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:51:52:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:51:52:elinks:INFO: Disabling clock on downlink 0
14:51:52:elinks:INFO: Disabling clock on downlink 1
14:51:52:elinks:INFO: Disabling clock on downlink 2
14:51:52:elinks:INFO: Disabling clock on downlink 3
14:51:52:elinks:INFO: Disabling clock on downlink 4
14:51:52:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:51:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:51:52:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:51:52:setup_element:INFO: Scanning clock phase
14:51:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:51:52:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:51:52:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:51:52:setup_element:INFO: Eye window for uplink 24: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:51:52:setup_element:INFO: Eye window for uplink 25: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:51:52:setup_element:INFO: Eye window for uplink 26: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:51:52:setup_element:INFO: Eye window for uplink 27: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:51:52:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:51:52:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:51:52:setup_element:INFO: Eye window for uplink 30: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:51:52:setup_element:INFO: Eye window for uplink 31: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:51:52:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:51:52:setup_element:INFO: Scanning data phases
14:51:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:51:52:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:51:57:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:51:57:setup_element:INFO: Eye window for uplink 24: ____XXXXX_______________________________
Data delay found: 26
14:51:58:setup_element:INFO: Eye window for uplink 25: ______XXXXXX____________________________
Data delay found: 28
14:51:58:setup_element:INFO: Eye window for uplink 26: _______XXXXX____________________________
Data delay found: 29
14:51:58:setup_element:INFO: Eye window for uplink 27: __________XXXXXX________________________
Data delay found: 32
14:51:58:setup_element:INFO: Eye window for uplink 28: ___________XXXXXX_______________________
Data delay found: 33
14:51:58:setup_element:INFO: Eye window for uplink 29: _____________XXXXXX_____________________
Data delay found: 35
14:51:58:setup_element:INFO: Eye window for uplink 30: ___________XXXXXXX______________________
Data delay found: 34
14:51:58:setup_element:INFO: Eye window for uplink 31: __________XXXXXX________________________
Data delay found: 32
14:51:58:setup_element:INFO: Setting the data phase to 26 for uplink 24
14:51:58:setup_element:INFO: Setting the data phase to 28 for uplink 25
14:51:58:setup_element:INFO: Setting the data phase to 29 for uplink 26
14:51:58:setup_element:INFO: Setting the data phase to 32 for uplink 27
14:51:58:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:51:58:setup_element:INFO: Setting the data phase to 35 for uplink 29
14:51:58:setup_element:INFO: Setting the data phase to 34 for uplink 30
14:51:58:setup_element:INFO: Setting the data phase to 32 for uplink 31
14:51:58:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 71
Eye Windows:
Uplink 24: ______________________________________________________________________XXXXXXXX__
Uplink 25: ______________________________________________________________________XXXXXXXX__
Uplink 26: ______________________________________________________________________XXXXXXXX__
Uplink 27: ______________________________________________________________________XXXXXXXX__
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: ______________________________________________________________________XXXXXXXX__
Uplink 31: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 26:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 30:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 31:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
]
14:51:58:setup_element:INFO: Beginning SMX ASICs map scan
14:51:58:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:51:58:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:51:58:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:51:58:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:51:58:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
14:51:58:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:51:58:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:51:58:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:51:58:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:51:58:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:51:59:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:51:59:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:51:59:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:52:00:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 71
Eye Windows:
Uplink 24: ______________________________________________________________________XXXXXXXX__
Uplink 25: ______________________________________________________________________XXXXXXXX__
Uplink 26: ______________________________________________________________________XXXXXXXX__
Uplink 27: ______________________________________________________________________XXXXXXXX__
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: ______________________________________________________________________XXXXXXXX__
Uplink 31: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 26:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 30:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 31:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
14:52:00:setup_element:INFO: Performing Elink synchronization
14:52:00:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:52:00:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:52:00:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:52:00:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:52:00:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:52:00:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
14:52:00:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:52:01:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:52:02:febtest:INFO: 30-01 | XA-000-08-002-000-004-074-13 | 37.7 | 1195.1
14:52:02:febtest:INFO: 28-03 | XA-000-08-002-000-004-078-13 | 31.4 | 1224.5
14:52:02:febtest:INFO: 26-05 | XA-000-08-002-000-004-069-13 | 40.9 | 1177.4
14:52:02:febtest:INFO: 24-07 | XA-000-08-002-000-004-068-13 | 34.6 | 1201.0
14:52:02:ST3_smx:INFO: Configuring SMX FAST
14:52:04:ST3_smx:INFO: chip: 30-1 37.726682 C 1200.969315 mV
14:52:04:ST3_smx:INFO: Electrons
14:52:04:ST3_smx:INFO: # loops 0
14:52:06:ST3_smx:INFO: # loops 1
14:52:08:ST3_smx:INFO: # loops 2
14:52:09:ST3_smx:INFO: Total # of broken channels: 0
14:52:09:ST3_smx:INFO: List of broken channels: []
14:52:09:ST3_smx:INFO: Total # of broken channels: 0
14:52:09:ST3_smx:INFO: List of broken channels: []
14:52:10:ST3_smx:INFO: Configuring SMX FAST
14:52:12:ST3_smx:INFO: chip: 28-3 40.898880 C 1195.082160 mV
14:52:12:ST3_smx:INFO: Electrons
14:52:12:ST3_smx:INFO: # loops 0
14:52:14:ST3_smx:INFO: # loops 1
14:52:16:ST3_smx:INFO: # loops 2
14:52:18:ST3_smx:INFO: Total # of broken channels: 0
14:52:18:ST3_smx:INFO: List of broken channels: []
14:52:18:ST3_smx:INFO: Total # of broken channels: 0
14:52:18:ST3_smx:INFO: List of broken channels: []
14:52:19:ST3_smx:INFO: Configuring SMX FAST
14:52:21:ST3_smx:INFO: chip: 26-5 44.073563 C 1159.654860 mV
14:52:21:ST3_smx:INFO: Electrons
14:52:21:ST3_smx:INFO: # loops 0
14:52:22:ST3_smx:INFO: # loops 1
14:52:24:ST3_smx:INFO: # loops 2
14:52:26:ST3_smx:INFO: Total # of broken channels: 0
14:52:26:ST3_smx:INFO: List of broken channels: []
14:52:26:ST3_smx:INFO: Total # of broken channels: 0
14:52:26:ST3_smx:INFO: List of broken channels: []
14:52:27:ST3_smx:INFO: Configuring SMX FAST
14:52:29:ST3_smx:INFO: chip: 24-7 40.898880 C 1189.190035 mV
14:52:29:ST3_smx:INFO: Electrons
14:52:29:ST3_smx:INFO: # loops 0
14:52:30:ST3_smx:INFO: # loops 1
14:52:32:ST3_smx:INFO: # loops 2
14:52:34:ST3_smx:INFO: Total # of broken channels: 0
14:52:34:ST3_smx:INFO: List of broken channels: []
14:52:34:ST3_smx:INFO: Total # of broken channels: 2
14:52:34:ST3_smx:INFO: List of broken channels: [125, 127]
14:52:35:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:52:35:febtest:INFO: 30-01 | XA-000-08-002-000-004-074-13 | 37.7 | 1201.0
14:52:35:febtest:INFO: 28-03 | XA-000-08-002-000-004-078-13 | 40.9 | 1201.0
14:52:35:febtest:INFO: 26-05 | XA-000-08-002-000-004-069-13 | 44.1 | 1165.6
14:52:35:febtest:INFO: 24-07 | XA-000-08-002-000-004-068-13 | 40.9 | 1189.2
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_51_38
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2120
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9612', '1.850', '1.1400']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9949', '1.850', '0.1639']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9949', '1.850', '0.1639']
14:53:13:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:53:56:febtest:INFO: FEB type: 8.2
14:53:56:febtest:INFO: FEB SN: 2121
14:54:09:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:54:09:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:54:09:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:54:09:febtest:INFO: Testing FEB with SN 2121
14:54:12:smx_tester:INFO: Scanning setup
14:54:12:elinks:INFO: Disabling clock on downlink 0
14:54:12:elinks:INFO: Disabling clock on downlink 1
14:54:12:elinks:INFO: Disabling clock on downlink 2
14:54:12:elinks:INFO: Disabling clock on downlink 3
14:54:12:elinks:INFO: Disabling clock on downlink 4
14:54:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:54:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:54:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:54:12:elinks:INFO: Disabling clock on downlink 0
14:54:12:elinks:INFO: Disabling clock on downlink 1
14:54:12:elinks:INFO: Disabling clock on downlink 2
14:54:12:elinks:INFO: Disabling clock on downlink 3
14:54:12:elinks:INFO: Disabling clock on downlink 4
14:54:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:54:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:54:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:54:12:elinks:INFO: Disabling clock on downlink 0
14:54:12:elinks:INFO: Disabling clock on downlink 1
14:54:12:elinks:INFO: Disabling clock on downlink 2
14:54:12:elinks:INFO: Disabling clock on downlink 3
14:54:12:elinks:INFO: Disabling clock on downlink 4
14:54:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:54:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:54:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:54:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:54:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:54:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:54:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:54:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:54:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:54:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:54:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:54:12:elinks:INFO: Disabling clock on downlink 0
14:54:12:elinks:INFO: Disabling clock on downlink 1
14:54:12:elinks:INFO: Disabling clock on downlink 2
14:54:12:elinks:INFO: Disabling clock on downlink 3
14:54:12:elinks:INFO: Disabling clock on downlink 4
14:54:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:54:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:54:13:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:54:13:elinks:INFO: Disabling clock on downlink 0
14:54:13:elinks:INFO: Disabling clock on downlink 1
14:54:13:elinks:INFO: Disabling clock on downlink 2
14:54:13:elinks:INFO: Disabling clock on downlink 3
14:54:13:elinks:INFO: Disabling clock on downlink 4
14:54:13:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:54:13:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:54:13:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:54:13:setup_element:INFO: Scanning clock phase
14:54:13:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:54:13:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:54:13:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:54:13:setup_element:INFO: Eye window for uplink 24: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:54:13:setup_element:INFO: Eye window for uplink 25: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:54:13:setup_element:INFO: Eye window for uplink 26: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:54:13:setup_element:INFO: Eye window for uplink 27: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
14:54:13:setup_element:INFO: Eye window for uplink 28: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:54:13:setup_element:INFO: Eye window for uplink 29: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:54:13:setup_element:INFO: Eye window for uplink 30: _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:54:13:setup_element:INFO: Eye window for uplink 31: _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:54:13:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
14:54:13:setup_element:INFO: Scanning data phases
14:54:13:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:54:13:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:54:18:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:54:18:setup_element:INFO: Eye window for uplink 24: _______XXXX_____________________________
Data delay found: 28
14:54:18:setup_element:INFO: Eye window for uplink 25: __________XXXX__________________________
Data delay found: 31
14:54:18:setup_element:INFO: Eye window for uplink 26: ________XXXXXX__________________________
Data delay found: 30
14:54:18:setup_element:INFO: Eye window for uplink 27: ____________XXXXX_______________________
Data delay found: 34
14:54:18:setup_element:INFO: Eye window for uplink 28: __________XXXXXX________________________
Data delay found: 32
14:54:18:setup_element:INFO: Eye window for uplink 29: ____________XXXXX_______________________
Data delay found: 34
14:54:18:setup_element:INFO: Eye window for uplink 30: ____________XXXXXX______________________
Data delay found: 34
14:54:18:setup_element:INFO: Eye window for uplink 31: ___________XXXXX________________________
Data delay found: 33
14:54:18:setup_element:INFO: Setting the data phase to 28 for uplink 24
14:54:18:setup_element:INFO: Setting the data phase to 31 for uplink 25
14:54:18:setup_element:INFO: Setting the data phase to 30 for uplink 26
14:54:18:setup_element:INFO: Setting the data phase to 34 for uplink 27
14:54:18:setup_element:INFO: Setting the data phase to 32 for uplink 28
14:54:18:setup_element:INFO: Setting the data phase to 34 for uplink 29
14:54:18:setup_element:INFO: Setting the data phase to 34 for uplink 30
14:54:18:setup_element:INFO: Setting the data phase to 33 for uplink 31
14:54:18:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: ______________________________________________________________________XXXXXXXX__
Uplink 25: ______________________________________________________________________XXXXXXXX__
Uplink 26: ______________________________________________________________________XXXXXXXXX_
Uplink 27: ______________________________________________________________________XXXXXXXXX_
Uplink 28: _____________________________________________________________________XXXXXXXX___
Uplink 29: _____________________________________________________________________XXXXXXXX___
Uplink 30: _______________________________________________________________________XXXXXX___
Uplink 31: _______________________________________________________________________XXXXXX___
Data phase characteristics:
Uplink 24:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 36
Eye Window: __________XXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 30:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 31:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
]
14:54:18:setup_element:INFO: Beginning SMX ASICs map scan
14:54:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:54:18:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:54:19:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:54:19:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:54:19:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
14:54:19:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:54:19:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:54:19:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:54:19:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:54:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:54:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:54:20:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:54:20:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:54:21:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: ______________________________________________________________________XXXXXXXX__
Uplink 25: ______________________________________________________________________XXXXXXXX__
Uplink 26: ______________________________________________________________________XXXXXXXXX_
Uplink 27: ______________________________________________________________________XXXXXXXXX_
Uplink 28: _____________________________________________________________________XXXXXXXX___
Uplink 29: _____________________________________________________________________XXXXXXXX___
Uplink 30: _______________________________________________________________________XXXXXX___
Uplink 31: _______________________________________________________________________XXXXXX___
Data phase characteristics:
Uplink 24:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 36
Eye Window: __________XXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 30:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 31:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
14:54:21:setup_element:INFO: Performing Elink synchronization
14:54:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:54:21:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:54:21:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:54:21:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:54:21:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:54:21:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
14:54:21:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
14:54:22:smx_tester:INFO: Scanning setup
14:54:22:elinks:INFO: Disabling clock on downlink 0
14:54:22:elinks:INFO: Disabling clock on downlink 1
14:54:22:elinks:INFO: Disabling clock on downlink 2
14:54:22:elinks:INFO: Disabling clock on downlink 3
14:54:22:elinks:INFO: Disabling clock on downlink 4
14:54:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:54:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:54:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:54:22:elinks:INFO: Disabling clock on downlink 0
14:54:22:elinks:INFO: Disabling clock on downlink 1
14:54:22:elinks:INFO: Disabling clock on downlink 2
14:54:22:elinks:INFO: Disabling clock on downlink 3
14:54:22:elinks:INFO: Disabling clock on downlink 4
14:54:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:54:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:54:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:54:22:elinks:INFO: Disabling clock on downlink 0
14:54:22:elinks:INFO: Disabling clock on downlink 1
14:54:22:elinks:INFO: Disabling clock on downlink 2
14:54:22:elinks:INFO: Disabling clock on downlink 3
14:54:22:elinks:INFO: Disabling clock on downlink 4
14:54:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:54:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:54:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:54:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:54:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:54:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:54:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:54:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:54:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:54:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:54:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:54:22:elinks:INFO: Disabling clock on downlink 0
14:54:22:elinks:INFO: Disabling clock on downlink 1
14:54:22:elinks:INFO: Disabling clock on downlink 2
14:54:22:elinks:INFO: Disabling clock on downlink 3
14:54:22:elinks:INFO: Disabling clock on downlink 4
14:54:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:54:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:54:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:54:22:elinks:INFO: Disabling clock on downlink 0
14:54:22:elinks:INFO: Disabling clock on downlink 1
14:54:23:elinks:INFO: Disabling clock on downlink 2
14:54:23:elinks:INFO: Disabling clock on downlink 3
14:54:23:elinks:INFO: Disabling clock on downlink 4
14:54:23:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:54:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:54:23:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:54:23:setup_element:INFO: Scanning clock phase
14:54:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:54:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:54:23:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:54:23:setup_element:INFO: Eye window for uplink 24: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:54:23:setup_element:INFO: Eye window for uplink 25: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:54:23:setup_element:INFO: Eye window for uplink 26: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:54:23:setup_element:INFO: Eye window for uplink 27: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:54:23:setup_element:INFO: Eye window for uplink 28: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:54:23:setup_element:INFO: Eye window for uplink 29: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:54:23:setup_element:INFO: Eye window for uplink 30: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:54:23:setup_element:INFO: Eye window for uplink 31: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:54:23:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
14:54:23:setup_element:INFO: Scanning data phases
14:54:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:54:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:54:28:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:54:28:setup_element:INFO: Eye window for uplink 24: _______XXXX_____________________________
Data delay found: 28
14:54:28:setup_element:INFO: Eye window for uplink 25: __________XXXX__________________________
Data delay found: 31
14:54:28:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
14:54:28:setup_element:INFO: Eye window for uplink 27: ___________XXXXX________________________
Data delay found: 33
14:54:28:setup_element:INFO: Eye window for uplink 28: __________XXXXX_________________________
Data delay found: 32
14:54:28:setup_element:INFO: Eye window for uplink 29: ____________XXXXX_______________________
Data delay found: 34
14:54:28:setup_element:INFO: Eye window for uplink 30: ____________XXXXXX______________________
Data delay found: 34
14:54:28:setup_element:INFO: Eye window for uplink 31: ___________XXXXX________________________
Data delay found: 33
14:54:28:setup_element:INFO: Setting the data phase to 28 for uplink 24
14:54:28:setup_element:INFO: Setting the data phase to 31 for uplink 25
14:54:28:setup_element:INFO: Setting the data phase to 30 for uplink 26
14:54:28:setup_element:INFO: Setting the data phase to 33 for uplink 27
14:54:28:setup_element:INFO: Setting the data phase to 32 for uplink 28
14:54:28:setup_element:INFO: Setting the data phase to 34 for uplink 29
14:54:28:setup_element:INFO: Setting the data phase to 34 for uplink 30
14:54:28:setup_element:INFO: Setting the data phase to 33 for uplink 31
14:54:28:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 24: ______________________________________________________________________XXXXXXXX__
Uplink 25: ______________________________________________________________________XXXXXXXX__
Uplink 26: ______________________________________________________________________XXXXXXXX__
Uplink 27: ______________________________________________________________________XXXXXXXX__
Uplink 28: _____________________________________________________________________XXXXXXX____
Uplink 29: _____________________________________________________________________XXXXXXX____
Uplink 30: ______________________________________________________________________XXXXXXX___
Uplink 31: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 24:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 36
Eye Window: __________XXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 29:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 30:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 31:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
]
14:54:28:setup_element:INFO: Beginning SMX ASICs map scan
14:54:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:54:28:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:54:28:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:54:28:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:54:28:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
14:54:29:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:54:29:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:54:29:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:54:29:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:54:29:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:54:29:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:54:30:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:54:30:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:54:31:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 24: ______________________________________________________________________XXXXXXXX__
Uplink 25: ______________________________________________________________________XXXXXXXX__
Uplink 26: ______________________________________________________________________XXXXXXXX__
Uplink 27: ______________________________________________________________________XXXXXXXX__
Uplink 28: _____________________________________________________________________XXXXXXX____
Uplink 29: _____________________________________________________________________XXXXXXX____
Uplink 30: ______________________________________________________________________XXXXXXX___
Uplink 31: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 24:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 36
Eye Window: __________XXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 29:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 30:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 31:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
14:54:31:setup_element:INFO: Performing Elink synchronization
14:54:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:54:31:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:54:31:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:54:31:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:54:31:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:54:31:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
14:54:31:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:54:32:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:54:32:febtest:INFO: 30-01 | XA-000-08-002-000-004-024-15 | 28.2 | 1242.0
14:54:33:febtest:INFO: 28-03 | XA-000-08-002-000-004-020-15 | 25.1 | 1236.2
14:54:33:febtest:INFO: 26-05 | XA-000-08-002-000-004-035-06 | 37.7 | 1183.3
14:54:33:febtest:INFO: 24-07 | XA-000-08-002-000-004-034-06 | 21.9 | 1242.0
14:54:33:ST3_smx:INFO: Configuring SMX FAST
14:54:35:ST3_smx:INFO: chip: 30-1 37.726682 C 1200.969315 mV
14:54:35:ST3_smx:INFO: Electrons
14:54:35:ST3_smx:INFO: # loops 0
14:54:37:ST3_smx:INFO: # loops 1
14:54:39:ST3_smx:INFO: # loops 2
14:54:40:ST3_smx:INFO: Total # of broken channels: 0
14:54:40:ST3_smx:INFO: List of broken channels: []
14:54:40:ST3_smx:INFO: Total # of broken channels: 0
14:54:40:ST3_smx:INFO: List of broken channels: []
14:54:41:ST3_smx:INFO: Configuring SMX FAST
14:54:43:ST3_smx:INFO: chip: 28-3 34.556970 C 1212.728715 mV
14:54:43:ST3_smx:INFO: Electrons
14:54:43:ST3_smx:INFO: # loops 0
14:54:45:ST3_smx:INFO: # loops 1
14:54:47:ST3_smx:INFO: # loops 2
14:54:49:ST3_smx:INFO: Total # of broken channels: 0
14:54:49:ST3_smx:INFO: List of broken channels: []
14:54:49:ST3_smx:INFO: Total # of broken channels: 0
14:54:49:ST3_smx:INFO: List of broken channels: []
14:54:50:ST3_smx:INFO: Configuring SMX FAST
14:54:52:ST3_smx:INFO: chip: 26-5 47.250730 C 1165.571835 mV
14:54:52:ST3_smx:INFO: Electrons
14:54:52:ST3_smx:INFO: # loops 0
14:54:53:ST3_smx:INFO: # loops 1
14:54:55:ST3_smx:INFO: # loops 2
14:54:57:ST3_smx:INFO: Total # of broken channels: 0
14:54:57:ST3_smx:INFO: List of broken channels: []
14:54:57:ST3_smx:INFO: Total # of broken channels: 0
14:54:57:ST3_smx:INFO: List of broken channels: []
14:54:58:ST3_smx:INFO: Configuring SMX FAST
14:55:00:ST3_smx:INFO: chip: 24-7 34.556970 C 1200.969315 mV
14:55:00:ST3_smx:INFO: Electrons
14:55:00:ST3_smx:INFO: # loops 0
14:55:01:ST3_smx:INFO: # loops 1
14:55:03:ST3_smx:INFO: # loops 2
14:55:05:ST3_smx:INFO: Total # of broken channels: 0
14:55:05:ST3_smx:INFO: List of broken channels: []
14:55:05:ST3_smx:INFO: Total # of broken channels: 0
14:55:05:ST3_smx:INFO: List of broken channels: []
14:55:06:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:55:06:febtest:INFO: 30-01 | XA-000-08-002-000-004-024-15 | 40.9 | 1206.9
14:55:06:febtest:INFO: 28-03 | XA-000-08-002-000-004-020-15 | 34.6 | 1218.6
14:55:06:febtest:INFO: 26-05 | XA-000-08-002-000-004-035-06 | 47.3 | 1165.6
14:55:07:febtest:INFO: 24-07 | XA-000-08-002-000-004-034-06 | 37.7 | 1201.0
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_54_09
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2121
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.8773', '1.850', '1.0390']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9900', '1.850', '0.1663']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9879', '1.850', '0.1663']
14:56:29:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:58:01:febtest:INFO: FEB type: 8.2
14:58:01:febtest:INFO: FEB SN: 1116
14:58:04:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:58:04:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:58:04:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:58:04:febtest:INFO: Testing FEB with SN 1116
14:58:07:smx_tester:INFO: Scanning setup
14:58:07:elinks:INFO: Disabling clock on downlink 0
14:58:07:elinks:INFO: Disabling clock on downlink 1
14:58:07:elinks:INFO: Disabling clock on downlink 2
14:58:07:elinks:INFO: Disabling clock on downlink 3
14:58:07:elinks:INFO: Disabling clock on downlink 4
14:58:07:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:58:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:58:07:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:58:07:elinks:INFO: Disabling clock on downlink 0
14:58:07:elinks:INFO: Disabling clock on downlink 1
14:58:07:elinks:INFO: Disabling clock on downlink 2
14:58:07:elinks:INFO: Disabling clock on downlink 3
14:58:07:elinks:INFO: Disabling clock on downlink 4
14:58:07:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:58:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:58:07:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:58:07:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:58:07:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:58:07:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:58:07:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:58:07:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:58:07:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:58:07:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:58:07:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:58:07:elinks:INFO: Disabling clock on downlink 0
14:58:07:elinks:INFO: Disabling clock on downlink 1
14:58:07:elinks:INFO: Disabling clock on downlink 2
14:58:07:elinks:INFO: Disabling clock on downlink 3
14:58:07:elinks:INFO: Disabling clock on downlink 4
14:58:07:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:58:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:58:07:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:58:07:elinks:INFO: Disabling clock on downlink 0
14:58:07:elinks:INFO: Disabling clock on downlink 1
14:58:07:elinks:INFO: Disabling clock on downlink 2
14:58:07:elinks:INFO: Disabling clock on downlink 3
14:58:07:elinks:INFO: Disabling clock on downlink 4
14:58:07:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:58:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:58:08:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:58:08:elinks:INFO: Disabling clock on downlink 0
14:58:08:elinks:INFO: Disabling clock on downlink 1
14:58:08:elinks:INFO: Disabling clock on downlink 2
14:58:08:elinks:INFO: Disabling clock on downlink 3
14:58:08:elinks:INFO: Disabling clock on downlink 4
14:58:08:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:58:08:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:58:08:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:58:08:setup_element:INFO: Scanning clock phase
14:58:08:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:58:08:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:58:08:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:58:08:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:58:08:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:58:08:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:58:08:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:58:08:setup_element:INFO: Eye window for uplink 12: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:58:08:setup_element:INFO: Eye window for uplink 13: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:58:08:setup_element:INFO: Eye window for uplink 14: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:58:08:setup_element:INFO: Eye window for uplink 15: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:58:08:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:58:08:setup_element:INFO: Scanning data phases
14:58:08:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:58:08:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:58:13:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:58:13:setup_element:INFO: Eye window for uplink 8 : ____________________________XXXX________
Data delay found: 9
14:58:13:setup_element:INFO: Eye window for uplink 9 : _________________________________XXXXX__
Data delay found: 15
14:58:13:setup_element:INFO: Eye window for uplink 10: _____________________________XXXXXX_____
Data delay found: 11
14:58:13:setup_element:INFO: Eye window for uplink 11: _________________________________XXXXXX_
Data delay found: 15
14:58:13:setup_element:INFO: Eye window for uplink 12: ______________________________XXXX______
Data delay found: 11
14:58:13:setup_element:INFO: Eye window for uplink 13: _________________________________XXXX___
Data delay found: 14
14:58:13:setup_element:INFO: Eye window for uplink 14: _______________________________XXXXX____
Data delay found: 13
14:58:13:setup_element:INFO: Eye window for uplink 15: ________________________________XXXXXX__
Data delay found: 14
14:58:13:setup_element:INFO: Setting the data phase to 9 for uplink 8
14:58:13:setup_element:INFO: Setting the data phase to 15 for uplink 9
14:58:13:setup_element:INFO: Setting the data phase to 11 for uplink 10
14:58:13:setup_element:INFO: Setting the data phase to 15 for uplink 11
14:58:13:setup_element:INFO: Setting the data phase to 11 for uplink 12
14:58:13:setup_element:INFO: Setting the data phase to 14 for uplink 13
14:58:13:setup_element:INFO: Setting the data phase to 13 for uplink 14
14:58:13:setup_element:INFO: Setting the data phase to 14 for uplink 15
14:58:13:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXX____
Uplink 11: _____________________________________________________________________XXXXXXX____
Uplink 12: _____________________________________________________________________XXXXXXXX___
Uplink 13: _____________________________________________________________________XXXXXXXX___
Uplink 14: ______________________________________________________________________XXXXXXXX__
Uplink 15: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 8:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 9:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 10:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 12:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 13:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 14:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 15:
Optimal Phase: 14
Window Length: 34
Eye Window: ________________________________XXXXXX__
]
14:58:13:setup_element:INFO: Beginning SMX ASICs map scan
14:58:13:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:58:13:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:58:13:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:58:13:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:58:13:uplink:INFO: Setting uplinks mask [8, 9, 10, 11, 12, 13, 14, 15]
14:58:14:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:58:14:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:58:14:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:58:14:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:58:14:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:58:14:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:58:15:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:58:15:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:58:16:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXX____
Uplink 11: _____________________________________________________________________XXXXXXX____
Uplink 12: _____________________________________________________________________XXXXXXXX___
Uplink 13: _____________________________________________________________________XXXXXXXX___
Uplink 14: ______________________________________________________________________XXXXXXXX__
Uplink 15: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 8:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 9:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 10:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 12:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 13:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 14:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 15:
Optimal Phase: 14
Window Length: 34
Eye Window: ________________________________XXXXXX__
14:58:16:setup_element:INFO: Performing Elink synchronization
14:58:16:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:58:16:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:58:16:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:58:16:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:58:16:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:58:16:uplink:INFO: Enabling uplinks [8, 9, 10, 11, 12, 13, 14, 15]
14:58:16:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
14:58:17:smx_tester:INFO: Scanning setup
14:58:17:elinks:INFO: Disabling clock on downlink 0
14:58:17:elinks:INFO: Disabling clock on downlink 1
14:58:17:elinks:INFO: Disabling clock on downlink 2
14:58:17:elinks:INFO: Disabling clock on downlink 3
14:58:17:elinks:INFO: Disabling clock on downlink 4
14:58:17:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:58:17:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:58:17:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:58:17:elinks:INFO: Disabling clock on downlink 0
14:58:17:elinks:INFO: Disabling clock on downlink 1
14:58:17:elinks:INFO: Disabling clock on downlink 2
14:58:17:elinks:INFO: Disabling clock on downlink 3
14:58:17:elinks:INFO: Disabling clock on downlink 4
14:58:17:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:58:17:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:58:17:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:58:17:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:58:17:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:58:17:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:58:17:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:58:17:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:58:17:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:58:17:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:58:17:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:58:17:elinks:INFO: Disabling clock on downlink 0
14:58:17:elinks:INFO: Disabling clock on downlink 1
14:58:17:elinks:INFO: Disabling clock on downlink 2
14:58:17:elinks:INFO: Disabling clock on downlink 3
14:58:17:elinks:INFO: Disabling clock on downlink 4
14:58:17:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:58:17:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:58:17:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:58:17:elinks:INFO: Disabling clock on downlink 0
14:58:17:elinks:INFO: Disabling clock on downlink 1
14:58:17:elinks:INFO: Disabling clock on downlink 2
14:58:17:elinks:INFO: Disabling clock on downlink 3
14:58:17:elinks:INFO: Disabling clock on downlink 4
14:58:17:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:58:17:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:58:17:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:58:17:elinks:INFO: Disabling clock on downlink 0
14:58:17:elinks:INFO: Disabling clock on downlink 1
14:58:17:elinks:INFO: Disabling clock on downlink 2
14:58:17:elinks:INFO: Disabling clock on downlink 3
14:58:17:elinks:INFO: Disabling clock on downlink 4
14:58:17:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:58:17:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:58:17:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:58:17:setup_element:INFO: Scanning clock phase
14:58:17:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:58:18:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:58:18:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:58:18:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:58:18:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:58:18:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:58:18:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:58:18:setup_element:INFO: Eye window for uplink 12: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:58:18:setup_element:INFO: Eye window for uplink 13: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:58:18:setup_element:INFO: Eye window for uplink 14: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:58:18:setup_element:INFO: Eye window for uplink 15: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:58:18:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:58:18:setup_element:INFO: Scanning data phases
14:58:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:58:18:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:58:23:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:58:23:setup_element:INFO: Eye window for uplink 8 : ____________________________XXXX________
Data delay found: 9
14:58:23:setup_element:INFO: Eye window for uplink 9 : _________________________________XXXXX__
Data delay found: 15
14:58:23:setup_element:INFO: Eye window for uplink 10: ______________________________XXXXX_____
Data delay found: 12
14:58:23:setup_element:INFO: Eye window for uplink 11: _________________________________XXXXXX_
Data delay found: 15
14:58:23:setup_element:INFO: Eye window for uplink 12: ______________________________XXXXX_____
Data delay found: 12
14:58:23:setup_element:INFO: Eye window for uplink 13: ________________________________XXXXXX__
Data delay found: 14
14:58:23:setup_element:INFO: Eye window for uplink 14: ______________________________XXXXX_____
Data delay found: 12
14:58:23:setup_element:INFO: Eye window for uplink 15: _______________________________XXXXXX___
Data delay found: 13
14:58:23:setup_element:INFO: Setting the data phase to 9 for uplink 8
14:58:23:setup_element:INFO: Setting the data phase to 15 for uplink 9
14:58:23:setup_element:INFO: Setting the data phase to 12 for uplink 10
14:58:23:setup_element:INFO: Setting the data phase to 15 for uplink 11
14:58:23:setup_element:INFO: Setting the data phase to 12 for uplink 12
14:58:23:setup_element:INFO: Setting the data phase to 14 for uplink 13
14:58:23:setup_element:INFO: Setting the data phase to 12 for uplink 14
14:58:23:setup_element:INFO: Setting the data phase to 13 for uplink 15
14:58:23:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXXX__
Uplink 9: _____________________________________________________________________XXXXXXXXX__
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: _____________________________________________________________________XXXXXXXX___
Uplink 13: _____________________________________________________________________XXXXXXXX___
Uplink 14: ______________________________________________________________________XXXXXXXX__
Uplink 15: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 8:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 9:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 10:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 12:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 13:
Optimal Phase: 14
Window Length: 34
Eye Window: ________________________________XXXXXX__
Uplink 14:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 15:
Optimal Phase: 13
Window Length: 34
Eye Window: _______________________________XXXXXX___
]
14:58:23:setup_element:INFO: Beginning SMX ASICs map scan
14:58:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:58:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:58:23:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:58:23:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:58:23:uplink:INFO: Setting uplinks mask [8, 9, 10, 11, 12, 13, 14, 15]
14:58:23:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:58:23:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:58:24:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:58:24:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:58:24:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:58:24:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:58:24:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:58:24:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:58:26:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXXX__
Uplink 9: _____________________________________________________________________XXXXXXXXX__
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: _____________________________________________________________________XXXXXXXX___
Uplink 13: _____________________________________________________________________XXXXXXXX___
Uplink 14: ______________________________________________________________________XXXXXXXX__
Uplink 15: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 8:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 9:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 10:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 12:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 13:
Optimal Phase: 14
Window Length: 34
Eye Window: ________________________________XXXXXX__
Uplink 14:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 15:
Optimal Phase: 13
Window Length: 34
Eye Window: _______________________________XXXXXX___
14:58:26:setup_element:INFO: Performing Elink synchronization
14:58:26:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:58:26:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:58:26:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:58:26:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:58:26:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:58:26:uplink:INFO: Enabling uplinks [8, 9, 10, 11, 12, 13, 14, 15]
14:58:26:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
14:58:27:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:58:27:febtest:INFO: 08-01 | XA-000-08-002-000-004-210-00 | 15.6 | 1277.1
14:58:27:febtest:INFO: 10-03 | XA-000-08-002-000-004-214-00 | 28.2 | 1230.3
14:58:28:febtest:INFO: 12-05 | XA-000-08-002-000-004-183-11 | 40.9 | 1183.3
14:58:28:febtest:INFO: 14-07 | XA-000-08-002-000-004-169-12 | 34.6 | 1212.7
14:58:28:ST3_smx:INFO: Configuring SMX FAST
14:58:30:ST3_smx:INFO: chip: 8-1 28.225000 C 1236.187875 mV
14:58:30:ST3_smx:INFO: Electrons
14:58:30:ST3_smx:INFO: # loops 0
14:58:32:ST3_smx:INFO: # loops 1
14:58:33:ST3_smx:INFO: # loops 2
14:58:35:ST3_smx:INFO: Total # of broken channels: 0
14:58:35:ST3_smx:INFO: List of broken channels: []
14:58:35:ST3_smx:INFO: Total # of broken channels: 0
14:58:35:ST3_smx:INFO: List of broken channels: []
14:58:36:ST3_smx:INFO: Configuring SMX FAST
14:58:38:ST3_smx:INFO: chip: 10-3 25.062742 C 1242.040240 mV
14:58:38:ST3_smx:INFO: Electrons
14:58:38:ST3_smx:INFO: # loops 0
14:58:40:ST3_smx:INFO: # loops 1
14:58:42:ST3_smx:INFO: # loops 2
14:58:43:ST3_smx:INFO: Total # of broken channels: 0
14:58:43:ST3_smx:INFO: List of broken channels: []
14:58:43:ST3_smx:INFO: Total # of broken channels: 0
14:58:43:ST3_smx:INFO: List of broken channels: []
14:58:44:ST3_smx:INFO: Configuring SMX FAST
14:58:46:ST3_smx:INFO: chip: 12-5 47.250730 C 1153.732915 mV
14:58:46:ST3_smx:INFO: Electrons
14:58:46:ST3_smx:INFO: # loops 0
14:58:48:ST3_smx:INFO: # loops 1
14:58:50:ST3_smx:INFO: # loops 2
14:58:51:ST3_smx:INFO: Total # of broken channels: 0
14:58:51:ST3_smx:INFO: List of broken channels: []
14:58:51:ST3_smx:INFO: Total # of broken channels: 0
14:58:51:ST3_smx:INFO: List of broken channels: []
14:58:52:ST3_smx:INFO: Configuring SMX FAST
14:58:54:ST3_smx:INFO: chip: 14-7 31.389742 C 1230.330540 mV
14:58:54:ST3_smx:INFO: Electrons
14:58:54:ST3_smx:INFO: # loops 0
14:58:56:ST3_smx:INFO: # loops 1
14:58:58:ST3_smx:INFO: # loops 2
14:59:00:ST3_smx:INFO: Total # of broken channels: 0
14:59:00:ST3_smx:INFO: List of broken channels: []
14:59:00:ST3_smx:INFO: Total # of broken channels: 0
14:59:00:ST3_smx:INFO: List of broken channels: []
14:59:00:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:59:01:febtest:INFO: 08-01 | XA-000-08-002-000-004-210-00 | 28.2 | 1236.2
14:59:01:febtest:INFO: 10-03 | XA-000-08-002-000-004-214-00 | 25.1 | 1242.0
14:59:01:febtest:INFO: 12-05 | XA-000-08-002-000-004-183-11 | 47.3 | 1159.7
14:59:01:febtest:INFO: 14-07 | XA-000-08-002-000-004-169-12 | 31.4 | 1224.5
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-14_58_04
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1116
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.451', '0.7826', '1.850', '1.4540', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '0.9958', '1.850', '0.3803', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '0.9909', '1.850', '0.1598', '0.000', '0.0000', '0.000', '0.0000']
14:59:11:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
15:00:30:febtest:INFO: FEB type: 8.2
15:00:30:febtest:INFO: FEB SN: 1116
15:00:32:febtest:INFO: FEB type: 8.2
15:00:32:febtest:INFO: FEB SN: 1216
15:00:36:febtest:INFO: FEB type: 8.2
15:00:36:febtest:INFO: FEB SN: 2116
15:00:42:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
15:00:42:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
15:00:42:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
15:00:42:febtest:INFO: Testing FEB with SN 2116
15:00:45:smx_tester:INFO: Scanning setup
15:00:45:elinks:INFO: Disabling clock on downlink 0
15:00:45:elinks:INFO: Disabling clock on downlink 1
15:00:45:elinks:INFO: Disabling clock on downlink 2
15:00:45:elinks:INFO: Disabling clock on downlink 3
15:00:45:elinks:INFO: Disabling clock on downlink 4
15:00:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:00:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
15:00:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:00:45:elinks:INFO: Disabling clock on downlink 0
15:00:45:elinks:INFO: Disabling clock on downlink 1
15:00:45:elinks:INFO: Disabling clock on downlink 2
15:00:45:elinks:INFO: Disabling clock on downlink 3
15:00:45:elinks:INFO: Disabling clock on downlink 4
15:00:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:00:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
15:00:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:00:45:elinks:INFO: Disabling clock on downlink 0
15:00:45:elinks:INFO: Disabling clock on downlink 1
15:00:45:elinks:INFO: Disabling clock on downlink 2
15:00:45:elinks:INFO: Disabling clock on downlink 3
15:00:45:elinks:INFO: Disabling clock on downlink 4
15:00:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:00:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:00:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
15:00:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
15:00:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
15:00:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
15:00:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
15:00:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
15:00:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
15:00:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
15:00:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:00:45:elinks:INFO: Disabling clock on downlink 0
15:00:45:elinks:INFO: Disabling clock on downlink 1
15:00:45:elinks:INFO: Disabling clock on downlink 2
15:00:45:elinks:INFO: Disabling clock on downlink 3
15:00:45:elinks:INFO: Disabling clock on downlink 4
15:00:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:00:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
15:00:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:00:46:elinks:INFO: Disabling clock on downlink 0
15:00:46:elinks:INFO: Disabling clock on downlink 1
15:00:46:elinks:INFO: Disabling clock on downlink 2
15:00:46:elinks:INFO: Disabling clock on downlink 3
15:00:46:elinks:INFO: Disabling clock on downlink 4
15:00:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:00:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
15:00:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:00:46:setup_element:INFO: Scanning clock phase
15:00:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:00:46:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:00:46:setup_element:INFO: Clock phase scan results for group 0, downlink 2
15:00:46:setup_element:INFO: Eye window for uplink 24: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:00:46:setup_element:INFO: Eye window for uplink 25: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:00:46:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:00:46:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:00:46:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:00:46:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:00:46:setup_element:INFO: Eye window for uplink 30: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
15:00:46:setup_element:INFO: Eye window for uplink 31: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
15:00:46:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
15:00:46:setup_element:INFO: Scanning data phases
15:00:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:00:46:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:00:51:setup_element:INFO: Data phase scan results for group 0, downlink 2
15:00:51:setup_element:INFO: Eye window for uplink 24: ____XXXXX_______________________________
Data delay found: 26
15:00:51:setup_element:INFO: Eye window for uplink 25: _______XXXXX____________________________
Data delay found: 29
15:00:51:setup_element:INFO: Eye window for uplink 26: _______XXXX_____________________________
Data delay found: 28
15:00:51:setup_element:INFO: Eye window for uplink 27: __________XXXXX_________________________
Data delay found: 32
15:00:51:setup_element:INFO: Eye window for uplink 28: ___________XXXXXXX______________________
Data delay found: 34
15:00:51:setup_element:INFO: Eye window for uplink 29: ____________XXXXXXX_____________________
Data delay found: 35
15:00:51:setup_element:INFO: Eye window for uplink 30: _____________XXXXXX_____________________
Data delay found: 35
15:00:51:setup_element:INFO: Eye window for uplink 31: ___________XXXXXX_______________________
Data delay found: 33
15:00:51:setup_element:INFO: Setting the data phase to 26 for uplink 24
15:00:51:setup_element:INFO: Setting the data phase to 29 for uplink 25
15:00:51:setup_element:INFO: Setting the data phase to 28 for uplink 26
15:00:51:setup_element:INFO: Setting the data phase to 32 for uplink 27
15:00:51:setup_element:INFO: Setting the data phase to 34 for uplink 28
15:00:51:setup_element:INFO: Setting the data phase to 35 for uplink 29
15:00:51:setup_element:INFO: Setting the data phase to 35 for uplink 30
15:00:51:setup_element:INFO: Setting the data phase to 33 for uplink 31
15:00:51:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: _____________________________________________________________________XXXXXXXXX__
Uplink 31: _____________________________________________________________________XXXXXXXXX__
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 28:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 29:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 30:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 31:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
]
15:00:51:setup_element:INFO: Beginning SMX ASICs map scan
15:00:51:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:00:51:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:00:51:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:00:51:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:00:51:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
15:00:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
15:00:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
15:00:52:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
15:00:52:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
15:00:52:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
15:00:52:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
15:00:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
15:00:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
15:00:54:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: _____________________________________________________________________XXXXXXXXX__
Uplink 31: _____________________________________________________________________XXXXXXXXX__
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 28:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 29:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 30:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 31:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
15:00:54:setup_element:INFO: Performing Elink synchronization
15:00:54:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:00:54:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:00:54:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:00:54:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:00:54:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
15:00:54:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
15:00:54:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
15:00:55:smx_tester:INFO: Scanning setup
15:00:55:elinks:INFO: Disabling clock on downlink 0
15:00:55:elinks:INFO: Disabling clock on downlink 1
15:00:55:elinks:INFO: Disabling clock on downlink 2
15:00:55:elinks:INFO: Disabling clock on downlink 3
15:00:55:elinks:INFO: Disabling clock on downlink 4
15:00:55:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:00:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
15:00:55:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:00:55:elinks:INFO: Disabling clock on downlink 0
15:00:55:elinks:INFO: Disabling clock on downlink 1
15:00:55:elinks:INFO: Disabling clock on downlink 2
15:00:55:elinks:INFO: Disabling clock on downlink 3
15:00:55:elinks:INFO: Disabling clock on downlink 4
15:00:55:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:00:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
15:00:55:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:00:55:elinks:INFO: Disabling clock on downlink 0
15:00:55:elinks:INFO: Disabling clock on downlink 1
15:00:55:elinks:INFO: Disabling clock on downlink 2
15:00:55:elinks:INFO: Disabling clock on downlink 3
15:00:55:elinks:INFO: Disabling clock on downlink 4
15:00:55:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:00:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:00:55:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
15:00:55:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
15:00:55:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
15:00:55:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
15:00:55:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
15:00:55:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
15:00:55:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
15:00:55:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
15:00:55:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:00:55:elinks:INFO: Disabling clock on downlink 0
15:00:55:elinks:INFO: Disabling clock on downlink 1
15:00:55:elinks:INFO: Disabling clock on downlink 2
15:00:55:elinks:INFO: Disabling clock on downlink 3
15:00:55:elinks:INFO: Disabling clock on downlink 4
15:00:55:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:00:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
15:00:55:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:00:55:elinks:INFO: Disabling clock on downlink 0
15:00:55:elinks:INFO: Disabling clock on downlink 1
15:00:55:elinks:INFO: Disabling clock on downlink 2
15:00:55:elinks:INFO: Disabling clock on downlink 3
15:00:55:elinks:INFO: Disabling clock on downlink 4
15:00:55:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:00:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
15:00:55:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:00:55:setup_element:INFO: Scanning clock phase
15:00:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:00:56:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:00:56:setup_element:INFO: Clock phase scan results for group 0, downlink 2
15:00:56:setup_element:INFO: Eye window for uplink 24: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:00:56:setup_element:INFO: Eye window for uplink 25: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:00:56:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:00:56:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:00:56:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:00:56:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:00:56:setup_element:INFO: Eye window for uplink 30: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
15:00:56:setup_element:INFO: Eye window for uplink 31: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
15:00:56:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
15:00:56:setup_element:INFO: Scanning data phases
15:00:56:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:00:56:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:01:01:setup_element:INFO: Data phase scan results for group 0, downlink 2
15:01:01:setup_element:INFO: Eye window for uplink 24: ____XXXXX_______________________________
Data delay found: 26
15:01:01:setup_element:INFO: Eye window for uplink 25: _______XXXX_____________________________
Data delay found: 28
15:01:01:setup_element:INFO: Eye window for uplink 26: ______XXXX______________________________
Data delay found: 27
15:01:01:setup_element:INFO: Eye window for uplink 27: _________XXXXXX_________________________
Data delay found: 31
15:01:01:setup_element:INFO: Eye window for uplink 28: ___________XXXXXXX______________________
Data delay found: 34
15:01:01:setup_element:INFO: Eye window for uplink 29: ____________XXXXXXX_X___________________
Data delay found: 36
15:01:01:setup_element:INFO: Eye window for uplink 30: _____________XXXXXXX____________________
Data delay found: 36
15:01:01:setup_element:INFO: Eye window for uplink 31: ____________XXXXXX______________________
Data delay found: 34
15:01:01:setup_element:INFO: Setting the data phase to 26 for uplink 24
15:01:01:setup_element:INFO: Setting the data phase to 28 for uplink 25
15:01:01:setup_element:INFO: Setting the data phase to 27 for uplink 26
15:01:01:setup_element:INFO: Setting the data phase to 31 for uplink 27
15:01:01:setup_element:INFO: Setting the data phase to 34 for uplink 28
15:01:01:setup_element:INFO: Setting the data phase to 36 for uplink 29
15:01:01:setup_element:INFO: Setting the data phase to 36 for uplink 30
15:01:01:setup_element:INFO: Setting the data phase to 34 for uplink 31
15:01:01:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: ______________________________________________________________________XXXXXXXX__
Uplink 31: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 26:
Optimal Phase: 27
Window Length: 36
Eye Window: ______XXXX______________________________
Uplink 27:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 28:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 29:
Optimal Phase: 36
Window Length: 31
Eye Window: ____________XXXXXXX_X___________________
Uplink 30:
Optimal Phase: 36
Window Length: 33
Eye Window: _____________XXXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
]
15:01:01:setup_element:INFO: Beginning SMX ASICs map scan
15:01:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:01:01:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:01:01:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:01:01:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:01:01:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
15:01:01:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
15:01:01:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
15:01:02:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
15:01:02:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
15:01:02:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
15:01:02:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
15:01:02:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
15:01:03:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
15:01:04:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: ______________________________________________________________________XXXXXXXX__
Uplink 31: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 26:
Optimal Phase: 27
Window Length: 36
Eye Window: ______XXXX______________________________
Uplink 27:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 28:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 29:
Optimal Phase: 36
Window Length: 31
Eye Window: ____________XXXXXXX_X___________________
Uplink 30:
Optimal Phase: 36
Window Length: 33
Eye Window: _____________XXXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
15:01:04:setup_element:INFO: Performing Elink synchronization
15:01:04:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:01:04:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:01:04:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:01:04:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:01:04:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
15:01:04:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
15:01:04:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
15:01:05:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
15:01:05:febtest:INFO: 30-01 | XA-000-08-002-000-000-252-08 | 37.7 | 1195.1
15:01:05:febtest:INFO: 28-03 | XA-000-08-002-000-000-253-08 | 47.3 | 1165.6
15:01:06:febtest:INFO: 26-05 | XA-000-08-002-000-004-219-00 | 28.2 | 1230.3
15:01:06:febtest:INFO: 24-07 | XA-000-08-002-000-004-215-00 | 37.7 | 1183.3
15:01:06:ST3_smx:INFO: Configuring SMX FAST
15:01:08:ST3_smx:INFO: chip: 30-1 47.250730 C 1165.571835 mV
15:01:08:ST3_smx:INFO: Electrons
15:01:08:ST3_smx:INFO: # loops 0
15:01:10:ST3_smx:INFO: # loops 1
15:01:11:ST3_smx:INFO: # loops 2
15:01:13:ST3_smx:INFO: Total # of broken channels: 0
15:01:13:ST3_smx:INFO: List of broken channels: []
15:01:13:ST3_smx:INFO: Total # of broken channels: 1
15:01:13:ST3_smx:INFO: List of broken channels: [86]
15:01:14:ST3_smx:INFO: Configuring SMX FAST
15:01:16:ST3_smx:INFO: chip: 28-3 53.612520 C 1153.732915 mV
15:01:16:ST3_smx:INFO: Electrons
15:01:16:ST3_smx:INFO: # loops 0
15:01:18:ST3_smx:INFO: # loops 1
15:01:20:ST3_smx:INFO: # loops 2
15:01:21:ST3_smx:INFO: Total # of broken channels: 0
15:01:21:ST3_smx:INFO: List of broken channels: []
15:01:21:ST3_smx:INFO: Total # of broken channels: 0
15:01:21:ST3_smx:INFO: List of broken channels: []
15:01:22:ST3_smx:INFO: Configuring SMX FAST
15:01:24:ST3_smx:INFO: chip: 26-5 34.556970 C 1206.851500 mV
15:01:24:ST3_smx:INFO: Electrons
15:01:24:ST3_smx:INFO: # loops 0
15:01:26:ST3_smx:INFO: # loops 1
15:01:28:ST3_smx:INFO: # loops 2
15:01:29:ST3_smx:INFO: Total # of broken channels: 0
15:01:29:ST3_smx:INFO: List of broken channels: []
15:01:29:ST3_smx:INFO: Total # of broken channels: 0
15:01:29:ST3_smx:INFO: List of broken channels: []
15:01:30:ST3_smx:INFO: Configuring SMX FAST
15:01:33:ST3_smx:INFO: chip: 24-7 37.726682 C 1195.082160 mV
15:01:33:ST3_smx:INFO: Electrons
15:01:33:ST3_smx:INFO: # loops 0
15:01:34:ST3_smx:INFO: # loops 1
15:01:36:ST3_smx:INFO: # loops 2
15:01:38:ST3_smx:INFO: Total # of broken channels: 0
15:01:38:ST3_smx:INFO: List of broken channels: []
15:01:38:ST3_smx:INFO: Total # of broken channels: 0
15:01:38:ST3_smx:INFO: List of broken channels: []
15:01:39:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
15:01:39:febtest:INFO: 30-01 | XA-000-08-002-000-000-252-08 | 50.4 | 1165.6
15:01:39:febtest:INFO: 28-03 | XA-000-08-002-000-000-253-08 | 53.6 | 1153.7
15:01:39:febtest:INFO: 26-05 | XA-000-08-002-000-004-219-00 | 34.6 | 1206.9
15:01:39:febtest:INFO: 24-07 | XA-000-08-002-000-004-215-00 | 37.7 | 1195.1
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-15_00_42
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME : 15:01:51:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
15:01:58:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
15:01:58:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
15:01:58:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
15:01:58:febtest:INFO: Testing FEB with SN 2116
15:02:01:smx_tester:INFO: Scanning setup
15:02:01:elinks:INFO: Disabling clock on downlink 0
15:02:01:elinks:INFO: Disabling clock on downlink 1
15:02:01:elinks:INFO: Disabling clock on downlink 2
15:02:01:elinks:INFO: Disabling clock on downlink 3
15:02:01:elinks:INFO: Disabling clock on downlink 4
15:02:01:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:02:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
15:02:01:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:02:01:elinks:INFO: Disabling clock on downlink 0
15:02:01:elinks:INFO: Disabling clock on downlink 1
15:02:01:elinks:INFO: Disabling clock on downlink 2
15:02:01:elinks:INFO: Disabling clock on downlink 3
15:02:01:elinks:INFO: Disabling clock on downlink 4
15:02:01:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:02:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
15:02:01:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:02:01:elinks:INFO: Disabling clock on downlink 0
15:02:01:elinks:INFO: Disabling clock on downlink 1
15:02:01:elinks:INFO: Disabling clock on downlink 2
15:02:01:elinks:INFO: Disabling clock on downlink 3
15:02:01:elinks:INFO: Disabling clock on downlink 4
15:02:01:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:02:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:02:01:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
15:02:01:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
15:02:01:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
15:02:01:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
15:02:01:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
15:02:01:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
15:02:01:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
15:02:01:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
15:02:01:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:02:01:elinks:INFO: Disabling clock on downlink 0
15:02:01:elinks:INFO: Disabling clock on downlink 1
15:02:01:elinks:INFO: Disabling clock on downlink 2
15:02:01:elinks:INFO: Disabling clock on downlink 3
15:02:01:elinks:INFO: Disabling clock on downlink 4
15:02:01:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:02:01:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
15:02:02:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:02:02:elinks:INFO: Disabling clock on downlink 0
15:02:02:elinks:INFO: Disabling clock on downlink 1
15:02:02:elinks:INFO: Disabling clock on downlink 2
15:02:02:elinks:INFO: Disabling clock on downlink 3
15:02:02:elinks:INFO: Disabling clock on downlink 4
15:02:02:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:02:02:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
15:02:02:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:02:02:setup_element:INFO: Scanning clock phase
15:02:02:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:02:02:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:02:02:setup_element:INFO: Clock phase scan results for group 0, downlink 2
15:02:02:setup_element:INFO: Eye window for uplink 24: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
15:02:02:setup_element:INFO: Eye window for uplink 25: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
15:02:02:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:02:02:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:02:02:setup_element:INFO: Eye window for uplink 28: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
15:02:02:setup_element:INFO: Eye window for uplink 29: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
15:02:02:setup_element:INFO: Eye window for uplink 30: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
15:02:02:setup_element:INFO: Eye window for uplink 31: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
15:02:02:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
15:02:02:setup_element:INFO: Scanning data phases
15:02:02:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:02:02:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:02:07:setup_element:INFO: Data phase scan results for group 0, downlink 2
15:02:07:setup_element:INFO: Eye window for uplink 24: _____XXXXX______________________________
Data delay found: 27
15:02:07:setup_element:INFO: Eye window for uplink 25: ________XXXXX___________________________
Data delay found: 30
15:02:07:setup_element:INFO: Eye window for uplink 26: _____XXXXX______________________________
Data delay found: 27
15:02:07:setup_element:INFO: Eye window for uplink 27: _________XXXXX__________________________
Data delay found: 31
15:02:07:setup_element:INFO: Eye window for uplink 28: ___________XXXXXX_______________________
Data delay found: 33
15:02:07:setup_element:INFO: Eye window for uplink 29: ____________XXXXXXX_____________________
Data delay found: 35
15:02:07:setup_element:INFO: Eye window for uplink 30: ____________XXXXXXX_____________________
Data delay found: 35
15:02:08:setup_element:INFO: Eye window for uplink 31: ___________XXXXXX_______________________
Data delay found: 33
15:02:08:setup_element:INFO: Setting the data phase to 27 for uplink 24
15:02:08:setup_element:INFO: Setting the data phase to 30 for uplink 25
15:02:08:setup_element:INFO: Setting the data phase to 27 for uplink 26
15:02:08:setup_element:INFO: Setting the data phase to 31 for uplink 27
15:02:08:setup_element:INFO: Setting the data phase to 33 for uplink 28
15:02:08:setup_element:INFO: Setting the data phase to 35 for uplink 29
15:02:08:setup_element:INFO: Setting the data phase to 35 for uplink 30
15:02:08:setup_element:INFO: Setting the data phase to 33 for uplink 31
15:02:08:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 24: ____________________________________________________________________XXXXXXXXX___
Uplink 25: ____________________________________________________________________XXXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: ______________________________________________________________________XXXXXXXXX_
Uplink 29: ______________________________________________________________________XXXXXXXXX_
Uplink 30: _____________________________________________________________________XXXXXXXXX__
Uplink 31: _____________________________________________________________________XXXXXXXXX__
Data phase characteristics:
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 26:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 27:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 30:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 31:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
]
15:02:08:setup_element:INFO: Beginning SMX ASICs map scan
15:02:08:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:02:08:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:02:08:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:02:08:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:02:08:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
15:02:08:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
15:02:08:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
15:02:08:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
15:02:08:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
15:02:09:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
15:02:09:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
15:02:09:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
15:02:09:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
15:02:10:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 24: ____________________________________________________________________XXXXXXXXX___
Uplink 25: ____________________________________________________________________XXXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: ______________________________________________________________________XXXXXXXXX_
Uplink 29: ______________________________________________________________________XXXXXXXXX_
Uplink 30: _____________________________________________________________________XXXXXXXXX__
Uplink 31: _____________________________________________________________________XXXXXXXXX__
Data phase characteristics:
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 26:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 27:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 30:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 31:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
15:02:10:setup_element:INFO: Performing Elink synchronization
15:02:10:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:02:10:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:02:10:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:02:10:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:02:10:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
15:02:10:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
15:02:10:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
15:02:11:smx_tester:INFO: Scanning setup
15:02:11:elinks:INFO: Disabling clock on downlink 0
15:02:11:elinks:INFO: Disabling clock on downlink 1
15:02:11:elinks:INFO: Disabling clock on downlink 2
15:02:11:elinks:INFO: Disabling clock on downlink 3
15:02:11:elinks:INFO: Disabling clock on downlink 4
15:02:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:02:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
15:02:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:02:11:elinks:INFO: Disabling clock on downlink 0
15:02:11:elinks:INFO: Disabling clock on downlink 1
15:02:11:elinks:INFO: Disabling clock on downlink 2
15:02:11:elinks:INFO: Disabling clock on downlink 3
15:02:11:elinks:INFO: Disabling clock on downlink 4
15:02:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:02:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
15:02:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:02:11:elinks:INFO: Disabling clock on downlink 0
15:02:11:elinks:INFO: Disabling clock on downlink 1
15:02:11:elinks:INFO: Disabling clock on downlink 2
15:02:11:elinks:INFO: Disabling clock on downlink 3
15:02:11:elinks:INFO: Disabling clock on downlink 4
15:02:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:02:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:02:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
15:02:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
15:02:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
15:02:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
15:02:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
15:02:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
15:02:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
15:02:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
15:02:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:02:12:elinks:INFO: Disabling clock on downlink 0
15:02:12:elinks:INFO: Disabling clock on downlink 1
15:02:12:elinks:INFO: Disabling clock on downlink 2
15:02:12:elinks:INFO: Disabling clock on downlink 3
15:02:12:elinks:INFO: Disabling clock on downlink 4
15:02:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:02:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
15:02:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:02:12:elinks:INFO: Disabling clock on downlink 0
15:02:12:elinks:INFO: Disabling clock on downlink 1
15:02:12:elinks:INFO: Disabling clock on downlink 2
15:02:12:elinks:INFO: Disabling clock on downlink 3
15:02:12:elinks:INFO: Disabling clock on downlink 4
15:02:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:02:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
15:02:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:02:12:setup_element:INFO: Scanning clock phase
15:02:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:02:12:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:02:12:setup_element:INFO: Clock phase scan results for group 0, downlink 2
15:02:12:setup_element:INFO: Eye window for uplink 24: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:02:12:setup_element:INFO: Eye window for uplink 25: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:02:12:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:02:12:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
15:02:12:setup_element:INFO: Eye window for uplink 28: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
15:02:12:setup_element:INFO: Eye window for uplink 29: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
15:02:12:setup_element:INFO: Eye window for uplink 30: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
15:02:12:setup_element:INFO: Eye window for uplink 31: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
15:02:12:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
15:02:12:setup_element:INFO: Scanning data phases
15:02:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:02:12:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:02:17:setup_element:INFO: Data phase scan results for group 0, downlink 2
15:02:17:setup_element:INFO: Eye window for uplink 24: ____XXXXX_______________________________
Data delay found: 26
15:02:17:setup_element:INFO: Eye window for uplink 25: _______XXXXX____________________________
Data delay found: 29
15:02:17:setup_element:INFO: Eye window for uplink 26: ______XXXXX_____________________________
Data delay found: 28
15:02:17:setup_element:INFO: Eye window for uplink 27: __________XXXX__________________________
Data delay found: 31
15:02:18:setup_element:INFO: Eye window for uplink 28: ___________XXXXXX_______________________
Data delay found: 33
15:02:18:setup_element:INFO: Eye window for uplink 29: ____________XXXXXXX_____________________
Data delay found: 35
15:02:18:setup_element:INFO: Eye window for uplink 30: ____________XXXXXXX_____________________
Data delay found: 35
15:02:18:setup_element:INFO: Eye window for uplink 31: ___________XXXXXX_______________________
Data delay found: 33
15:02:18:setup_element:INFO: Setting the data phase to 26 for uplink 24
15:02:18:setup_element:INFO: Setting the data phase to 29 for uplink 25
15:02:18:setup_element:INFO: Setting the data phase to 28 for uplink 26
15:02:18:setup_element:INFO: Setting the data phase to 31 for uplink 27
15:02:18:setup_element:INFO: Setting the data phase to 33 for uplink 28
15:02:18:setup_element:INFO: Setting the data phase to 35 for uplink 29
15:02:18:setup_element:INFO: Setting the data phase to 35 for uplink 30
15:02:18:setup_element:INFO: Setting the data phase to 33 for uplink 31
15:02:18:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: ______________________________________________________________________XXXXXXXX__
Uplink 29: ______________________________________________________________________XXXXXXXX__
Uplink 30: ______________________________________________________________________XXXXXXX___
Uplink 31: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 36
Eye Window: __________XXXX__________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 30:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 31:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
]
15:02:18:setup_element:INFO: Beginning SMX ASICs map scan
15:02:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:02:18:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:02:18:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:02:18:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:02:18:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
15:02:18:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
15:02:18:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
15:02:18:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
15:02:18:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
15:02:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
15:02:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
15:02:19:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
15:02:19:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
15:02:20:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: ______________________________________________________________________XXXXXXXX__
Uplink 29: ______________________________________________________________________XXXXXXXX__
Uplink 30: ______________________________________________________________________XXXXXXX___
Uplink 31: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 36
Eye Window: __________XXXX__________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 30:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 31:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
15:02:20:setup_element:INFO: Performing Elink synchronization
15:02:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:02:20:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:02:20:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:02:20:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:02:20:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
15:02:20:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
15:02:20:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
15:02:22:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
15:02:22:febtest:INFO: 30-01 | XA-000-08-002-000-000-252-08 | 44.1 | 1177.4
15:02:22:febtest:INFO: 28-03 | XA-000-08-002-000-000-253-08 | 47.3 | 1159.7
15:02:22:febtest:INFO: 26-05 | XA-000-08-002-000-004-219-00 | 28.2 | 1230.3
15:02:22:febtest:INFO: 24-07 | XA-000-08-002-000-004-215-00 | 37.7 | 1189.2
15:02:22:ST3_smx:INFO: Configuring SMX FAST
15:02:25:ST3_smx:INFO: chip: 30-1 50.430383 C 1159.654860 mV
15:02:25:ST3_smx:INFO: Electrons
15:02:25:ST3_smx:INFO: # loops 0
15:02:26:ST3_smx:INFO: # loops 1
15:02:28:ST3_smx:INFO: # loops 2
15:02:29:ST3_smx:INFO: Total # of broken channels: 0
15:02:29:ST3_smx:INFO: List of broken channels: []
15:02:29:ST3_smx:INFO: Total # of broken channels: 1
15:02:29:ST3_smx:INFO: List of broken channels: [86]
15:02:30:ST3_smx:INFO: Configuring SMX FAST
15:02:32:ST3_smx:INFO: chip: 28-3 53.612520 C 1153.732915 mV
15:02:32:ST3_smx:INFO: Electrons
15:02:32:ST3_smx:INFO: # loops 0
15:02:34:ST3_smx:INFO: # loops 1
15:02:36:ST3_smx:INFO: # loops 2
15:02:38:ST3_smx:INFO: Total # of broken channels: 0
15:02:38:ST3_smx:INFO: List of broken channels: []
15:02:38:ST3_smx:INFO: Total # of broken channels: 0
15:02:38:ST3_smx:INFO: List of broken channels: []
15:02:39:ST3_smx:INFO: Configuring SMX FAST
15:02:41:ST3_smx:INFO: chip: 26-5 34.556970 C 1200.969315 mV
15:02:41:ST3_smx:INFO: Electrons
15:02:41:ST3_smx:INFO: # loops 0
15:02:43:ST3_smx:INFO: # loops 1
15:02:45:ST3_smx:INFO: # loops 2
15:02:47:ST3_smx:INFO: Total # of broken channels: 0
15:02:47:ST3_smx:INFO: List of broken channels: []
15:02:47:ST3_smx:INFO: Total # of broken channels: 0
15:02:47:ST3_smx:INFO: List of broken channels: []
15:02:48:ST3_smx:INFO: Configuring SMX FAST
15:02:50:ST3_smx:INFO: chip: 24-7 37.726682 C 1195.082160 mV
15:02:50:ST3_smx:INFO: Electrons
15:02:50:ST3_smx:INFO: # loops 0
15:02:52:ST3_smx:INFO: # loops 1
15:02:54:ST3_smx:INFO: # loops 2
15:02:56:ST3_smx:INFO: Total # of broken channels: 0
15:02:56:ST3_smx:INFO: List of broken channels: []
15:02:56:ST3_smx:INFO: Total # of broken channels: 0
15:02:56:ST3_smx:INFO: List of broken channels: []
15:02:57:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
15:02:57:febtest:INFO: 30-01 | XA-000-08-002-000-000-252-08 | 50.4 | 1165.6
15:02:57:febtest:INFO: 28-03 | XA-000-08-002-000-000-253-08 | 53.6 | 1153.7
15:02:58:febtest:INFO: 26-05 | XA-000-08-002-000-004-219-00 | 34.6 | 1206.9
15:02:58:febtest:INFO: 24-07 | XA-000-08-002-000-004-215-00 | 37.7 | 1195.1
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_26-15_01_58
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2116
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9542', '1.850', '0.9767']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.0080', '1.850', '0.1745']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.0070', '1.850', '0.1637']
15:03:04:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
15:08:49:febtest:INFO: FEB type: 8.2
15:08:49:febtest:INFO: FEB SN: 2013
15:08:52:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
15:08:52:ST3_Shared:INFO: --------------------------FEB-ASIC--------------------------
15:08:52:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
15:08:52:febtest:INFO: Testing FEB with SN 2013
15:08:55:smx_tester:INFO: Scanning setup
15:08:55:elinks:INFO: Disabling clock on downlink 0
15:08:55:elinks:INFO: Disabling clock on downlink 1
15:08:55:elinks:INFO: Disabling clock on downlink 2
15:08:55:elinks:INFO: Disabling clock on downlink 3
15:08:55:elinks:INFO: Disabling clock on downlink 4
15:08:55:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:08:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
15:08:55:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:08:55:elinks:INFO: Disabling clock on downlink 0
15:08:55:elinks:INFO: Disabling clock on downlink 1
15:08:55:elinks:INFO: Disabling clock on downlink 2
15:08:55:elinks:INFO: Disabling clock on downlink 3
15:08:55:elinks:INFO: Disabling clock on downlink 4
15:08:55:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:08:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
15:08:55:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:08:55:elinks:INFO: Disabling clock on downlink 0
15:08:55:elinks:INFO: Disabling clock on downlink 1
15:08:55:elinks:INFO: Disabling clock on downlink 2
15:08:55:elinks:INFO: Disabling clock on downlink 3
15:08:55:elinks:INFO: Disabling clock on downlink 4
15:08:55:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:08:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
15:08:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
15:08:56:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:08:56:elinks:INFO: Disabling clock on downlink 0
15:08:56:elinks:INFO: Disabling clock on downlink 1
15:08:56:elinks:INFO: Disabling clock on downlink 2
15:08:56:elinks:INFO: Disabling clock on downlink 3
15:08:56:elinks:INFO: Disabling clock on downlink 4
15:08:56:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:08:56:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
15:08:56:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:08:56:elinks:INFO: Disabling clock on downlink 0
15:08:56:elinks:INFO: Disabling clock on downlink 1
15:08:56:elinks:INFO: Disabling clock on downlink 2
15:08:56:elinks:INFO: Disabling clock on downlink 3
15:08:56:elinks:INFO: Disabling clock on downlink 4
15:08:56:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:08:56:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
15:08:56:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:08:56:setup_element:INFO: Scanning clock phase
15:08:56:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:08:56:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:08:56:setup_element:INFO: Clock phase scan results for group 0, downlink 2
15:08:56:setup_element:INFO: Eye window for uplink 16: X_______________________________________________________________________XXXXXXXX
Clock Delay: 36
15:08:56:setup_element:INFO: Eye window for uplink 17: X_______________________________________________________________________XXXXXXXX
Clock Delay: 36
15:08:56:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:08:56:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:08:57:setup_element:INFO: Eye window for uplink 20: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
15:08:57:setup_element:INFO: Eye window for uplink 21: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
15:08:57:setup_element:INFO: Eye window for uplink 22: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:08:57:setup_element:INFO: Eye window for uplink 23: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:08:57:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:08:57:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:08:57:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:08:57:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:08:57:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:08:57:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:08:57:setup_element:INFO: Eye window for uplink 30: X_________________________________________________________________________XXXXXX
Clock Delay: 37
15:08:57:setup_element:INFO: Eye window for uplink 31: X_________________________________________________________________________XXXXXX
Clock Delay: 37
15:08:57:setup_element:INFO: Setting the clock phase to 35 for group 0, downlink 2
15:08:57:setup_element:INFO: Scanning data phases
15:08:57:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:08:57:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:09:02:setup_element:INFO: Data phase scan results for group 0, downlink 2
15:09:02:setup_element:INFO: Eye window for uplink 16: XXX___________________________________XX
Data delay found: 20
15:09:02:setup_element:INFO: Eye window for uplink 17: __________________________________XXXXX_
Data delay found: 16
15:09:02:setup_element:INFO: Eye window for uplink 18: X__________________________________XXXXX
Data delay found: 17
15:09:02:setup_element:INFO: Eye window for uplink 19: ________________________________XXXXX___
Data delay found: 14
15:09:02:setup_element:INFO: Eye window for uplink 20: X___________________________________XXXX
Data delay found: 18
15:09:02:setup_element:INFO: Eye window for uplink 21: __________________________________XXXXXX
Data delay found: 16
15:09:02:setup_element:INFO: Eye window for uplink 22: X_________________________________XXXXX_
Data delay found: 17
15:09:02:setup_element:INFO: Eye window for uplink 23: _________________________________XXXXX__
Data delay found: 15
15:09:02:setup_element:INFO: Eye window for uplink 24: _____XXXXX______________________________
Data delay found: 27
15:09:02:setup_element:INFO: Eye window for uplink 25: ________XXXXX___________________________
Data delay found: 30
15:09:02:setup_element:INFO: Eye window for uplink 26: ______XXXXXX____________________________
Data delay found: 28
15:09:02:setup_element:INFO: Eye window for uplink 27: _________XXXXXXX________________________
Data delay found: 32
15:09:02:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
15:09:02:setup_element:INFO: Eye window for uplink 29: _____________XXXXX______________________
Data delay found: 35
15:09:02:setup_element:INFO: Eye window for uplink 30: ________________XXXXXX__________________
Data delay found: 38
15:09:02:setup_element:INFO: Eye window for uplink 31: ______________XXXXXXX___________________
Data delay found: 37
15:09:02:setup_element:INFO: Setting the data phase to 20 for uplink 16
15:09:02:setup_element:INFO: Setting the data phase to 16 for uplink 17
15:09:02:setup_element:INFO: Setting the data phase to 17 for uplink 18
15:09:02:setup_element:INFO: Setting the data phase to 14 for uplink 19
15:09:02:setup_element:INFO: Setting the data phase to 18 for uplink 20
15:09:02:setup_element:INFO: Setting the data phase to 16 for uplink 21
15:09:02:setup_element:INFO: Setting the data phase to 17 for uplink 22
15:09:02:setup_element:INFO: Setting the data phase to 15 for uplink 23
15:09:02:setup_element:INFO: Setting the data phase to 27 for uplink 24
15:09:02:setup_element:INFO: Setting the data phase to 30 for uplink 25
15:09:02:setup_element:INFO: Setting the data phase to 28 for uplink 26
15:09:02:setup_element:INFO: Setting the data phase to 32 for uplink 27
15:09:02:setup_element:INFO: Setting the data phase to 33 for uplink 28
15:09:02:setup_element:INFO: Setting the data phase to 35 for uplink 29
15:09:02:setup_element:INFO: Setting the data phase to 38 for uplink 30
15:09:02:setup_element:INFO: Setting the data phase to 37 for uplink 31
15:09:02:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: X_______________________________________________________________________XXXXXXXX
Uplink 17: X_______________________________________________________________________XXXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: _______________________________________________________________________XXXXXXXXX
Uplink 21: _______________________________________________________________________XXXXXXXXX
Uplink 22: _______________________________________________________________________XXXXXXXX_
Uplink 23: _______________________________________________________________________XXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: X_________________________________________________________________________XXXXXX
Uplink 31: X_________________________________________________________________________XXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 17:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 18:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 19:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 34
Eye Window: __________________________________XXXXXX
Uplink 22:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 23:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 26:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 33
Eye Window: _________XXXXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 38
Window Length: 34
Eye Window: ________________XXXXXX__________________
Uplink 31:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXXXX___________________
]
15:09:02:setup_element:INFO: Beginning SMX ASICs map scan
15:09:02:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:09:02:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:09:02:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:09:02:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:09:02:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
15:09:02:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
15:09:02:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
15:09:02:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
15:09:02:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
15:09:03:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
15:09:03:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
15:09:03:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
15:09:03:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
15:09:03:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
15:09:03:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
15:09:03:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
15:09:03:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
15:09:03:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
15:09:03:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
15:09:04:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
15:09:04:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
15:09:05:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: X_______________________________________________________________________XXXXXXXX
Uplink 17: X_______________________________________________________________________XXXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: _______________________________________________________________________XXXXXXXXX
Uplink 21: _______________________________________________________________________XXXXXXXXX
Uplink 22: _______________________________________________________________________XXXXXXXX_
Uplink 23: _______________________________________________________________________XXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: X_________________________________________________________________________XXXXXX
Uplink 31: X_________________________________________________________________________XXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 17:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 18:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 19:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 34
Eye Window: __________________________________XXXXXX
Uplink 22:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 23:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 26:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 33
Eye Window: _________XXXXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 38
Window Length: 34
Eye Window: ________________XXXXXX__________________
Uplink 31:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXXXX___________________
15:09:05:setup_element:INFO: Performing Elink synchronization
15:09:05:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:09:05:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:09:05:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:09:05:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:09:05:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
15:09:05:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
15:09:05:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
15:09:06:smx_tester:INFO: Scanning setup
15:09:06:elinks:INFO: Disabling clock on downlink 0
15:09:06:elinks:INFO: Disabling clock on downlink 1
15:09:06:elinks:INFO: Disabling clock on downlink 2
15:09:06:elinks:INFO: Disabling clock on downlink 3
15:09:06:elinks:INFO: Disabling clock on downlink 4
15:09:06:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:09:06:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
15:09:06:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:09:06:elinks:INFO: Disabling clock on downlink 0
15:09:06:elinks:INFO: Disabling clock on downlink 1
15:09:06:elinks:INFO: Disabling clock on downlink 2
15:09:06:elinks:INFO: Disabling clock on downlink 3
15:09:06:elinks:INFO: Disabling clock on downlink 4
15:09:06:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:09:06:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
15:09:06:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:09:06:elinks:INFO: Disabling clock on downlink 0
15:09:06:elinks:INFO: Disabling clock on downlink 1
15:09:06:elinks:INFO: Disabling clock on downlink 2
15:09:06:elinks:INFO: Disabling clock on downlink 3
15:09:06:elinks:INFO: Disabling clock on downlink 4
15:09:06:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:09:06:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
15:09:06:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
15:09:06:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:09:06:elinks:INFO: Disabling clock on downlink 0
15:09:07:elinks:INFO: Disabling clock on downlink 1
15:09:07:elinks:INFO: Disabling clock on downlink 2
15:09:07:elinks:INFO: Disabling clock on downlink 3
15:09:07:elinks:INFO: Disabling clock on downlink 4
15:09:07:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:09:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
15:09:07:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:09:07:elinks:INFO: Disabling clock on downlink 0
15:09:07:elinks:INFO: Disabling clock on downlink 1
15:09:07:elinks:INFO: Disabling clock on downlink 2
15:09:07:elinks:INFO: Disabling clock on downlink 3
15:09:07:elinks:INFO: Disabling clock on downlink 4
15:09:07:setup_element:INFO: Checking SOS, encoding_mode: SOS
15:09:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
15:09:07:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
15:09:07:setup_element:INFO: Scanning clock phase
15:09:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:09:07:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:09:07:setup_element:INFO: Clock phase scan results for group 0, downlink 2
15:09:07:setup_element:INFO: Eye window for uplink 16: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
15:09:07:setup_element:INFO: Eye window for uplink 17: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
15:09:07:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:07:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:07:setup_element:INFO: Eye window for uplink 20: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:07:setup_element:INFO: Eye window for uplink 21: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:07:setup_element:INFO: Eye window for uplink 22: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:07:setup_element:INFO: Eye window for uplink 23: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:07:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:07:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:07:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:07:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:07:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:07:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
15:09:08:setup_element:INFO: Eye window for uplink 30: X_________________________________________________________________________XXXXXX
Clock Delay: 37
15:09:08:setup_element:INFO: Eye window for uplink 31: X_________________________________________________________________________XXXXXX
Clock Delay: 37
15:09:08:setup_element:INFO: Setting the clock phase to 35 for group 0, downlink 2
15:09:08:setup_element:INFO: Scanning data phases
15:09:08:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:09:08:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:09:13:setup_element:INFO: Data phase scan results for group 0, downlink 2
15:09:13:setup_element:INFO: Eye window for uplink 16: XX____________________________________XX
Data delay found: 19
15:09:13:setup_element:INFO: Eye window for uplink 17: __________________________________XXXX__
Data delay found: 15
15:09:13:setup_element:INFO: Eye window for uplink 18: X__________________________________XXXXX
Data delay found: 17
15:09:13:setup_element:INFO: Eye window for uplink 19: ________________________________XXXXX___
Data delay found: 14
15:09:13:setup_element:INFO: Eye window for uplink 20: X__________________________________XXXXX
Data delay found: 17
15:09:13:setup_element:INFO: Eye window for uplink 21: __________________________________XXXXX_
Data delay found: 16
15:09:13:setup_element:INFO: Eye window for uplink 22: X_________________________________XXXXX_
Data delay found: 17
15:09:13:setup_element:INFO: Eye window for uplink 23: _________________________________XXXX___
Data delay found: 14
15:09:13:setup_element:INFO: Eye window for uplink 24: _____XXXXX______________________________
Data delay found: 27
15:09:13:setup_element:INFO: Eye window for uplink 25: ________XXXXX___________________________
Data delay found: 30
15:09:13:setup_element:INFO: Eye window for uplink 26: _____XXXXXX_____________________________
Data delay found: 27
15:09:13:setup_element:INFO: Eye window for uplink 27: _________XXXXXX_________________________
Data delay found: 31
15:09:13:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
15:09:13:setup_element:INFO: Eye window for uplink 29: ____________XXXXXX______________________
Data delay found: 34
15:09:13:setup_element:INFO: Eye window for uplink 30: ________________XXXXXX__________________
Data delay found: 38
15:09:13:setup_element:INFO: Eye window for uplink 31: _______________XXXXXX___________________
Data delay found: 37
15:09:13:setup_element:INFO: Setting the data phase to 19 for uplink 16
15:09:13:setup_element:INFO: Setting the data phase to 15 for uplink 17
15:09:13:setup_element:INFO: Setting the data phase to 17 for uplink 18
15:09:13:setup_element:INFO: Setting the data phase to 14 for uplink 19
15:09:13:setup_element:INFO: Setting the data phase to 17 for uplink 20
15:09:13:setup_element:INFO: Setting the data phase to 16 for uplink 21
15:09:13:setup_element:INFO: Setting the data phase to 17 for uplink 22
15:09:13:setup_element:INFO: Setting the data phase to 14 for uplink 23
15:09:13:setup_element:INFO: Setting the data phase to 27 for uplink 24
15:09:13:setup_element:INFO: Setting the data phase to 30 for uplink 25
15:09:13:setup_element:INFO: Setting the data phase to 27 for uplink 26
15:09:13:setup_element:INFO: Setting the data phase to 31 for uplink 27
15:09:13:setup_element:INFO: Setting the data phase to 33 for uplink 28
15:09:13:setup_element:INFO: Setting the data phase to 34 for uplink 29
15:09:13:setup_element:INFO: Setting the data phase to 38 for uplink 30
15:09:13:setup_element:INFO: Setting the data phase to 37 for uplink 31
15:09:13:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXXX
Uplink 17: ________________________________________________________________________XXXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: _______________________________________________________________________XXXXXXXX_
Uplink 21: _______________________________________________________________________XXXXXXXX_
Uplink 22: _______________________________________________________________________XXXXXXXX_
Uplink 23: _______________________________________________________________________XXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: X_________________________________________________________________________XXXXXX
Uplink 31: X_________________________________________________________________________XXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 19
Window Length: 36
Eye Window: XX____________________________________XX
Uplink 17:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 18:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 19:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 20:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 22:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 26:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 38
Window Length: 34
Eye Window: ________________XXXXXX__________________
Uplink 31:
Optimal Phase: 37
Window Length: 34
Eye Window: _______________XXXXXX___________________
]
15:09:13:setup_element:INFO: Beginning SMX ASICs map scan
15:09:13:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:09:13:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:09:13:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:09:13:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:09:13:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
15:09:13:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
15:09:13:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
15:09:14:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
15:09:14:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
15:09:14:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
15:09:14:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
15:09:14:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
15:09:14:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
15:09:14:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
15:09:14:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
15:09:14:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
15:09:14:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
15:09:15:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
15:09:15:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
15:09:15:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
15:09:15:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
15:09:16:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXXX
Uplink 17: ________________________________________________________________________XXXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: _______________________________________________________________________XXXXXXXX_
Uplink 21: _______________________________________________________________________XXXXXXXX_
Uplink 22: _______________________________________________________________________XXXXXXXX_
Uplink 23: _______________________________________________________________________XXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: X_________________________________________________________________________XXXXXX
Uplink 31: X_________________________________________________________________________XXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 19
Window Length: 36
Eye Window: XX____________________________________XX
Uplink 17:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 18:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 19:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 20:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 22:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 23:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 26:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 38
Window Length: 34
Eye Window: ________________XXXXXX__________________
Uplink 31:
Optimal Phase: 37
Window Length: 34
Eye Window: _______________XXXXXX___________________
15:09:16:setup_element:INFO: Performing Elink synchronization
15:09:16:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
15:09:16:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
15:09:16:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
15:09:16:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
15:09:16:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
15:09:16:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
15:09:16:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
15:09:18:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
15:09:18:febtest:INFO: 23-00 | XA-000-08-002-001-006-147-14 | 28.2 | 1230.3
15:09:18:febtest:INFO: 30-01 | XA-000-08-002-001-006-143-09 | 63.2 | 1106.2
15:09:18:febtest:INFO: 21-02 | XA-000-08-002-001-006-140-09 | 40.9 | 1177.4
15:09:19:febtest:INFO: 28-03 | XA-000-08-002-001-006-153-14 | 34.6 | 1195.1
15:09:19:febtest:INFO: 19-04 | XA-000-08-002-001-006-169-07 | 31.4 | 1206.9
15:09:19:febtest:INFO: 26-05 | XA-000-08-002-001-006-163-07 | 47.3 | 1159.7
15:09:19:febtest:INFO: 17-06 | XA-000-08-002-001-006-177-00 | 40.9 | 1183.3
15:09:20:febtest:INFO: 24-07 | XA-000-08-002-001-006-173-07 | 25.1 | 1242.0
15:09:20:ST3_smx:INFO: Configuring SMX FAST
15:09:22:ST3_smx:INFO: chip: 23-0 37.726682 C 1200.969315 mV
15:09:22:ST3_smx:INFO: Electrons
15:09:22:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:09:24:ST3_smx:INFO: ----> Checking Analog response
15:09:24:ST3_smx:INFO: ----> Checking broken channels
15:09:24:ST3_smx:INFO: Total # broken ch: 0
15:09:24:ST3_smx:INFO: List FAST: []
15:09:24:ST3_smx:INFO: List SLOW: []
15:09:24:ST3_smx:INFO: Holes
15:09:24:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:09:26:ST3_smx:INFO: ----> Checking Analog response
15:09:26:ST3_smx:INFO: ----> Checking broken channels
15:09:26:ST3_smx:INFO: Total # broken ch: 0
15:09:26:ST3_smx:INFO: List FAST: []
15:09:26:ST3_smx:INFO: List SLOW: []
15:09:27:ST3_smx:INFO: Configuring SMX FAST
15:09:29:ST3_smx:INFO: chip: 30-1 56.797143 C 1129.995435 mV
15:09:29:ST3_smx:INFO: Electrons
15:09:29:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:09:31:ST3_smx:INFO: ----> Checking Analog response
15:09:31:ST3_smx:INFO: ----> Checking broken channels
15:09:31:ST3_smx:INFO: Total # broken ch: 0
15:09:31:ST3_smx:INFO: List FAST: []
15:09:31:ST3_smx:INFO: List SLOW: []
15:09:31:ST3_smx:INFO: Holes
15:09:31:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:09:33:ST3_smx:INFO: ----> Checking Analog response
15:09:33:ST3_smx:INFO: ----> Checking broken channels
15:09:33:ST3_smx:INFO: Total # broken ch: 0
15:09:33:ST3_smx:INFO: List FAST: []
15:09:33:ST3_smx:INFO: List SLOW: []
15:09:33:ST3_smx:INFO: Configuring SMX FAST
15:09:35:ST3_smx:INFO: chip: 21-2 37.726682 C 1195.082160 mV
15:09:35:ST3_smx:INFO: Electrons
15:09:35:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:09:37:ST3_smx:INFO: ----> Checking Analog response
15:09:37:ST3_smx:INFO: ----> Checking broken channels
15:09:38:ST3_smx:INFO: Total # broken ch: 0
15:09:38:ST3_smx:INFO: List FAST: []
15:09:38:ST3_smx:INFO: List SLOW: []
15:09:38:ST3_smx:INFO: Holes
15:09:38:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:09:39:ST3_smx:INFO: ----> Checking Analog response
15:09:39:ST3_smx:INFO: ----> Checking broken channels
15:09:40:ST3_smx:INFO: Total # broken ch: 0
15:09:40:ST3_smx:INFO: List FAST: []
15:09:40:ST3_smx:INFO: List SLOW: []
15:09:40:ST3_smx:INFO: Configuring SMX FAST
15:09:42:ST3_smx:INFO: chip: 28-3 34.556970 C 1200.969315 mV
15:09:42:ST3_smx:INFO: Electrons
15:09:42:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:09:44:ST3_smx:INFO: ----> Checking Analog response
15:09:44:ST3_smx:INFO: ----> Checking broken channels
15:09:44:ST3_smx:INFO: Total # broken ch: 0
15:09:44:ST3_smx:INFO: List FAST: []
15:09:44:ST3_smx:INFO: List SLOW: []
15:09:44:ST3_smx:INFO: Holes
15:09:44:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:09:46:ST3_smx:INFO: ----> Checking Analog response
15:09:46:ST3_smx:INFO: ----> Checking broken channels
15:09:46:ST3_smx:INFO: Total # broken ch: 0
15:09:46:ST3_smx:INFO: List FAST: []
15:09:46:ST3_smx:INFO: List SLOW: []
15:09:47:ST3_smx:INFO: Configuring SMX FAST
15:09:49:ST3_smx:INFO: chip: 19-4 31.389742 C 1212.728715 mV
15:09:49:ST3_smx:INFO: Electrons
15:09:49:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:09:51:ST3_smx:INFO: ----> Checking Analog response
15:09:51:ST3_smx:INFO: ----> Checking broken channels
15:09:51:ST3_smx:INFO: Total # broken ch: 0
15:09:51:ST3_smx:INFO: List FAST: []
15:09:51:ST3_smx:INFO: List SLOW: []
15:09:51:ST3_smx:INFO: Holes
15:09:51:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:09:53:ST3_smx:INFO: ----> Checking Analog response
15:09:53:ST3_smx:INFO: ----> Checking broken channels
15:09:53:ST3_smx:INFO: Total # broken ch: 0
15:09:53:ST3_smx:INFO: List FAST: []
15:09:53:ST3_smx:INFO: List SLOW: []
15:09:54:ST3_smx:INFO: Configuring SMX FAST
15:09:56:ST3_smx:INFO: chip: 26-5 44.073563 C 1171.483840 mV
15:09:56:ST3_smx:INFO: Electrons
15:09:56:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:09:58:ST3_smx:INFO: ----> Checking Analog response
15:09:58:ST3_smx:INFO: ----> Checking broken channels
15:09:58:ST3_smx:INFO: Total # broken ch: 0
15:09:58:ST3_smx:INFO: List FAST: []
15:09:58:ST3_smx:INFO: List SLOW: []
15:09:58:ST3_smx:INFO: Holes
15:09:58:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:10:00:ST3_smx:INFO: ----> Checking Analog response
15:10:00:ST3_smx:INFO: ----> Checking broken channels
15:10:00:ST3_smx:INFO: Total # broken ch: 0
15:10:00:ST3_smx:INFO: List FAST: []
15:10:00:ST3_smx:INFO: List SLOW: []
15:10:01:ST3_smx:INFO: Configuring SMX FAST
15:10:03:ST3_smx:INFO: chip: 17-6 37.726682 C 1195.082160 mV
15:10:03:ST3_smx:INFO: Electrons
15:10:03:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:10:05:ST3_smx:INFO: ----> Checking Analog response
15:10:05:ST3_smx:INFO: ----> Checking broken channels
15:10:05:ST3_smx:INFO: Total # broken ch: 0
15:10:05:ST3_smx:INFO: List FAST: []
15:10:05:ST3_smx:INFO: List SLOW: []
15:10:05:ST3_smx:INFO: Holes
15:10:05:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:10:07:ST3_smx:INFO: ----> Checking Analog response
15:10:07:ST3_smx:INFO: ----> Checking broken channels
15:10:07:ST3_smx:INFO: Total # broken ch: 0
15:10:07:ST3_smx:INFO: List FAST: []
15:10:07:ST3_smx:INFO: List SLOW: []
15:10:07:ST3_smx:INFO: Configuring SMX FAST
15:10:09:ST3_smx:INFO: chip: 24-7 37.726682 C 1200.969315 mV
15:10:09:ST3_smx:INFO: Electrons
15:10:09:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:10:11:ST3_smx:INFO: ----> Checking Analog response
15:10:11:ST3_smx:INFO: ----> Checking broken channels
15:10:11:ST3_smx:INFO: Total # broken ch: 0
15:10:11:ST3_smx:INFO: List FAST: []
15:10:11:ST3_smx:INFO: List SLOW: []
15:10:11:ST3_smx:INFO: Holes
15:10:11:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
15:10:13:ST3_smx:INFO: ----> Checking Analog response
15:10:13:ST3_smx:INFO: ----> Checking broken channels
15:10:13:ST3_smx:INFO: Total # broken ch: 0
15:10:13:ST3_smx:INFO: List FAST: []
15:10:13:ST3_smx:INFO: List SLOW: []
15:10:14:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
15:10:14:febtest:INFO: 23-00 | XA-000-08-002-001-006-147-14 | 37.7 | 1195.1
15:10:15:febtest:INFO: 30-01 | XA-000-08-002-001-006-143-09 | 56.8 | 1130.0
15:10:15:febtest:INFO: 21-02 | XA-000-08-002-001-006-140-09 | 40.9 | 1189.2
15:10:15:febtest:INFO: 28-03 | XA-000-08-002-001-006-153-14 | 37.7 | 1195.1
15:10:15:febtest:INFO: 19-04 | XA-000-08-002-001-006-169-07 | 34.6 | 1212.7
15:10:15:febtest:INFO: 26-05 | XA-000-08-002-001-006-163-07 | 47.3 | 1171.5
15:10:16:febtest:INFO: 17-06 | XA-000-08-002-001-006-177-00 | 40.9 | 1189.2
15:10:16:febtest:INFO: 24-07 | XA-000-08-002-001-006-173-07 | 37.7 | 1201.0
############################################################
# S U M M A R Y #
############################################################
{'TEST_NAME': 'FEB-ASIC', 'TEST_DATE': '24_02_26-15_08_52', 'OPERATOR': 'Olga B.; Oleksandr S.; ', 'PROJECT': 'GSI', 'SITE': 'GSI', 'SETUP': 'GSI_TEST_SETUP_1', 'ASIC_ID': 'XA-000-08-002-001-006-173-07', 'FUSED_ID': 6359364699117611735, 'HW_ADDR': 7, 'UPLINK': 24, 'VERS_NO': '', 'CABLE_SET_ID': '', 'IC_TEMP': '0', 'VDDM': '0', 'AUX': '0', 'CSABIAS': '0', 'VDDM_INT': '0', 'ADC_Chi2': 0.0, 'ADC_NDF': 0, 'ADC_P0': 0.0, 'ADC_P1': 0.006824, 'ADC_P2': -2.485e-06, 'ADC_P0err': 0.001, 'ADC_P1err': 0.001, 'ADC_P2err': 1e-05, 'ADC_VREF_P': 58, 'ADC_VREF_N': 30, 'ADC_VREF_T': 128, 'ADC_VREF_TR': 122, 'THR2_GLB': 30, 'LOOP__PLS': 100, 'CALIB_PLS': 250, 'SnsLoop': 5, 'IFED': 31, 'CSA_BIAS': 15, 'CSA_Chi2': 0.0, 'CSA_NDF': 0, 'CSA_P0': 0.0, 'CSA_P1': 0.0, 'CSA_P2': 0.0, 'CSA_P0err': 0.0, 'CSA_P1err': 0.0, 'CSA_P2err': 0.0, 'CONF_FAIL_REG': 0, 'N_BROKEN_DISC': 0, 'N_BROKEN_FAST': '[]', 'N_BROKEN_SLOW': '[]', 'P_BROKEN_DISC': 0, 'P_BROKEN_FAST': '[]', 'P_BROKEN_SLOW': '[]', 'ASIC_QA_category': '', 'N_BROKEN_CABLE': 0, 'LIST_OF_BROKEN_CABLES': 0, 'FEB_SN': '2013', 'FEB_TYPE': 8.2, 'FEB_UPLINKS': 2, 'FEB_A': 0, 'FEB_B': 1, 'ADDR_0': '', 'ADDR_1': '', 'ADDR_2': '', 'ADDR_3': '', 'ADDR_4': '', 'ADDR_5': '', 'ADDR_6': '', 'ADDR_7': '', 'SENSOR_ID': '', 'MODULE_NAME': '', 'MODULE_LADDER': '', 'MODULE_MODULE': '', 'MODULE_SIZE': '', 'MODULE_GRADE': '', 'MODULE_TYPE': '', 'VI_bInit': ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9470', '1.849', '2.7320'], 'VI_aInit': ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.0080', '1.850', '0.1745'], 'VI_atEnd': ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.0070', '1.850', '0.1637'], 'AMP_CAL': 150, 'PlsLoop': 200, 'N_ANA_PRESENT': 'Analog response OK', 'N_DISC_FAIL_CH': 0, 'N_ANA_FAIL_CH': '0', 'P_ANA_PRESENT': 'Analog response OK', 'P_DISC_FAIL_CH': 0, 'P_ANA_FAIL_CH': '0'}
===============================
{'CSA_FRONT': 30, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 31, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 30, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 30, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 31, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 30, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 30, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 31, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 30, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 30, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 31, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 30, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 30, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 31, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 30, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 30, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 31, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 30, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 30, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 31, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 30, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 30, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 31, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 30, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-ASIC
TEST_DATE : 24_02_26-15_08_52
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2013
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 113:47:17:febtest:INFO: FEB type: 8.2
13:47:17:febtest:INFO: FEB SN: 2120
13:47:20:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:47:20:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
13:47:20:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:47:20:febtest:INFO: Testing FEB with SN 2120
13:47:23:smx_tester:INFO: Scanning setup
13:47:23:elinks:INFO: Disabling clock on downlink 0
13:47:23:elinks:INFO: Disabling clock on downlink 1
13:47:23:elinks:INFO: Disabling clock on downlink 2
13:47:23:elinks:INFO: Disabling clock on downlink 3
13:47:23:elinks:INFO: Disabling clock on downlink 4
13:47:23:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:47:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
13:47:23:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:47:23:elinks:INFO: Disabling clock on downlink 0
13:47:23:elinks:INFO: Disabling clock on downlink 1
13:47:23:elinks:INFO: Disabling clock on downlink 2
13:47:23:elinks:INFO: Disabling clock on downlink 3
13:47:23:elinks:INFO: Disabling clock on downlink 4
13:47:23:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:47:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:47:23:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:47:23:elinks:INFO: Disabling clock on downlink 0
13:47:23:elinks:INFO: Disabling clock on downlink 1
13:47:23:elinks:INFO: Disabling clock on downlink 2
13:47:23:elinks:INFO: Disabling clock on downlink 3
13:47:23:elinks:INFO: Disabling clock on downlink 4
13:47:23:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:47:24:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
13:47:24:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
13:47:24:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:47:24:elinks:INFO: Disabling clock on downlink 0
13:47:24:elinks:INFO: Disabling clock on downlink 1
13:47:24:elinks:INFO: Disabling clock on downlink 2
13:47:24:elinks:INFO: Disabling clock on downlink 3
13:47:24:elinks:INFO: Disabling clock on downlink 4
13:47:24:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:47:24:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
13:47:24:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:47:24:elinks:INFO: Disabling clock on downlink 0
13:47:24:elinks:INFO: Disabling clock on downlink 1
13:47:24:elinks:INFO: Disabling clock on downlink 2
13:47:24:elinks:INFO: Disabling clock on downlink 3
13:47:24:elinks:INFO: Disabling clock on downlink 4
13:47:24:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:47:24:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
13:47:24:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:47:24:setup_element:INFO: Scanning clock phase
13:47:24:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:47:24:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:47:24:setup_element:INFO: Clock phase scan results for group 0, downlink 2
13:47:24:setup_element:INFO: Eye window for uplink 16: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:47:24:setup_element:INFO: Eye window for uplink 17: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:47:24:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:47:24:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:47:24:setup_element:INFO: Eye window for uplink 20: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:24:setup_element:INFO: Eye window for uplink 21: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:24:setup_element:INFO: Eye window for uplink 22: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
13:47:24:setup_element:INFO: Eye window for uplink 23: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
13:47:24:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:24:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:24:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:47:24:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:47:24:setup_element:INFO: Eye window for uplink 28: X________________________________________________________________________XXXXXXX
Clock Delay: 36
13:47:24:setup_element:INFO: Eye window for uplink 29: X________________________________________________________________________XXXXXXX
Clock Delay: 36
13:47:24:setup_element:INFO: Eye window for uplink 30: X_______________________________________________________________________XXXXXXXX
Clock Delay: 36
13:47:24:setup_element:INFO: Eye window for uplink 31: X_______________________________________________________________________XXXXXXXX
Clock Delay: 36
13:47:24:setup_element:INFO: Setting the clock phase to 35 for group 0, downlink 2
13:47:24:setup_element:INFO: Scanning data phases
13:47:24:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:47:25:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:47:30:setup_element:INFO: Data phase scan results for group 0, downlink 2
13:47:30:setup_element:INFO: Eye window for uplink 16: XX__________________________________XXXX
Data delay found: 18
13:47:30:setup_element:INFO: Eye window for uplink 17: ________________________________XXXXX___
Data delay found: 14
13:47:30:setup_element:INFO: Eye window for uplink 18: XXX_________________________________XXXX
Data delay found: 19
13:47:30:setup_element:INFO: Eye window for uplink 19: __________________________________XXXX__
Data delay found: 15
13:47:30:setup_element:INFO: Eye window for uplink 20: X___________________________________XXXX
Data delay found: 18
13:47:30:setup_element:INFO: Eye window for uplink 21: __________________________________XXXXXX
Data delay found: 16
13:47:30:setup_element:INFO: Eye window for uplink 22: XXX__________________________________XXX
Data delay found: 19
13:47:30:setup_element:INFO: Eye window for uplink 23: X__________________________________XXXXX
Data delay found: 17
13:47:30:setup_element:INFO: Eye window for uplink 24: ____XXXXXX______________________________
Data delay found: 26
13:47:30:setup_element:INFO: Eye window for uplink 25: _______XXXXX____________________________
Data delay found: 29
13:47:30:setup_element:INFO: Eye window for uplink 26: ________XXXX____________________________
Data delay found: 29
13:47:30:setup_element:INFO: Eye window for uplink 27: ___________XXXXX________________________
Data delay found: 33
13:47:30:setup_element:INFO: Eye window for uplink 28: ______________XXXXXX____________________
Data delay found: 36
13:47:30:setup_element:INFO: Eye window for uplink 29: _______________XXXXXXX__________________
Data delay found: 38
13:47:30:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
13:47:30:setup_element:INFO: Eye window for uplink 31: ____________XXXXXX______________________
Data delay found: 34
13:47:30:setup_element:INFO: Setting the data phase to 18 for uplink 16
13:47:30:setup_element:INFO: Setting the data phase to 14 for uplink 17
13:47:30:setup_element:INFO: Setting the data phase to 19 for uplink 18
13:47:30:setup_element:INFO: Setting the data phase to 15 for uplink 19
13:47:30:setup_element:INFO: Setting the data phase to 18 for uplink 20
13:47:30:setup_element:INFO: Setting the data phase to 16 for uplink 21
13:47:30:setup_element:INFO: Setting the data phase to 19 for uplink 22
13:47:30:setup_element:INFO: Setting the data phase to 17 for uplink 23
13:47:30:setup_element:INFO: Setting the data phase to 26 for uplink 24
13:47:30:setup_element:INFO: Setting the data phase to 29 for uplink 25
13:47:30:setup_element:INFO: Setting the data phase to 29 for uplink 26
13:47:30:setup_element:INFO: Setting the data phase to 33 for uplink 27
13:47:30:setup_element:INFO: Setting the data phase to 36 for uplink 28
13:47:30:setup_element:INFO: Setting the data phase to 38 for uplink 29
13:47:30:setup_element:INFO: Setting the data phase to 36 for uplink 30
13:47:30:setup_element:INFO: Setting the data phase to 34 for uplink 31
13:47:30:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXX_
Uplink 17: ________________________________________________________________________XXXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXXX
Uplink 19: _______________________________________________________________________XXXXXXXXX
Uplink 20: _______________________________________________________________________XXXXXXXX_
Uplink 21: _______________________________________________________________________XXXXXXXX_
Uplink 22: ________________________________________________________________________XXXXXXXX
Uplink 23: ________________________________________________________________________XXXXXXXX
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: X________________________________________________________________________XXXXXXX
Uplink 29: X________________________________________________________________________XXXXXXX
Uplink 30: X_______________________________________________________________________XXXXXXXX
Uplink 31: X_______________________________________________________________________XXXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 17:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 18:
Optimal Phase: 19
Window Length: 33
Eye Window: XXX_________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 34
Eye Window: __________________________________XXXXXX
Uplink 22:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 23:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 24:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 29:
Optimal Phase: 38
Window Length: 33
Eye Window: _______________XXXXXXX__________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
]
13:47:30:setup_element:INFO: Beginning SMX ASICs map scan
13:47:30:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:47:30:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:47:30:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:47:30:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:47:30:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
13:47:30:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
13:47:30:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
13:47:30:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
13:47:31:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
13:47:31:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
13:47:31:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
13:47:31:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
13:47:31:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
13:47:31:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
13:47:31:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
13:47:31:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
13:47:31:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
13:47:31:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
13:47:31:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
13:47:32:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
13:47:32:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
13:47:33:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXX_
Uplink 17: ________________________________________________________________________XXXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXXX
Uplink 19: _______________________________________________________________________XXXXXXXXX
Uplink 20: _______________________________________________________________________XXXXXXXX_
Uplink 21: _______________________________________________________________________XXXXXXXX_
Uplink 22: ________________________________________________________________________XXXXXXXX
Uplink 23: ________________________________________________________________________XXXXXXXX
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: X________________________________________________________________________XXXXXXX
Uplink 29: X________________________________________________________________________XXXXXXX
Uplink 30: X_______________________________________________________________________XXXXXXXX
Uplink 31: X_______________________________________________________________________XXXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 17:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 18:
Optimal Phase: 19
Window Length: 33
Eye Window: XXX_________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 34
Eye Window: __________________________________XXXXXX
Uplink 22:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 23:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 24:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 29:
Optimal Phase: 38
Window Length: 33
Eye Window: _______________XXXXXXX__________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
13:47:33:setup_element:INFO: Performing Elink synchronization
13:47:33:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:47:33:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:47:33:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:47:33:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:47:33:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
13:47:33:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
13:47:33:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
13:47:34:smx_tester:INFO: Scanning setup
13:47:34:elinks:INFO: Disabling clock on downlink 0
13:47:34:elinks:INFO: Disabling clock on downlink 1
13:47:34:elinks:INFO: Disabling clock on downlink 2
13:47:34:elinks:INFO: Disabling clock on downlink 3
13:47:34:elinks:INFO: Disabling clock on downlink 4
13:47:34:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:47:34:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
13:47:34:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:47:34:elinks:INFO: Disabling clock on downlink 0
13:47:34:elinks:INFO: Disabling clock on downlink 1
13:47:34:elinks:INFO: Disabling clock on downlink 2
13:47:34:elinks:INFO: Disabling clock on downlink 3
13:47:34:elinks:INFO: Disabling clock on downlink 4
13:47:34:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:47:34:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:47:34:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:47:34:elinks:INFO: Disabling clock on downlink 0
13:47:34:elinks:INFO: Disabling clock on downlink 1
13:47:34:elinks:INFO: Disabling clock on downlink 2
13:47:34:elinks:INFO: Disabling clock on downlink 3
13:47:34:elinks:INFO: Disabling clock on downlink 4
13:47:34:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:47:34:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 22
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 23
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
13:47:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
13:47:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:47:35:elinks:INFO: Disabling clock on downlink 0
13:47:35:elinks:INFO: Disabling clock on downlink 1
13:47:35:elinks:INFO: Disabling clock on downlink 2
13:47:35:elinks:INFO: Disabling clock on downlink 3
13:47:35:elinks:INFO: Disabling clock on downlink 4
13:47:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:47:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
13:47:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:47:35:elinks:INFO: Disabling clock on downlink 0
13:47:35:elinks:INFO: Disabling clock on downlink 1
13:47:35:elinks:INFO: Disabling clock on downlink 2
13:47:35:elinks:INFO: Disabling clock on downlink 3
13:47:35:elinks:INFO: Disabling clock on downlink 4
13:47:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:47:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
13:47:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:47:35:setup_element:INFO: Scanning clock phase
13:47:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:47:35:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:47:35:setup_element:INFO: Clock phase scan results for group 0, downlink 2
13:47:35:setup_element:INFO: Eye window for uplink 16: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:35:setup_element:INFO: Eye window for uplink 17: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:35:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:36:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:36:setup_element:INFO: Eye window for uplink 20: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:36:setup_element:INFO: Eye window for uplink 21: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:36:setup_element:INFO: Eye window for uplink 22: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:47:36:setup_element:INFO: Eye window for uplink 23: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:47:36:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:36:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:47:36:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:47:36:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:47:36:setup_element:INFO: Eye window for uplink 28: X________________________________________________________________________XXXXXXX
Clock Delay: 36
13:47:36:setup_element:INFO: Eye window for uplink 29: X________________________________________________________________________XXXXXXX
Clock Delay: 36
13:47:36:setup_element:INFO: Eye window for uplink 30: X_______________________________________________________________________XXXXXXXX
Clock Delay: 36
13:47:36:setup_element:INFO: Eye window for uplink 31: X_______________________________________________________________________XXXXXXXX
Clock Delay: 36
13:47:36:setup_element:INFO: Setting the clock phase to 35 for group 0, downlink 2
13:47:36:setup_element:INFO: Scanning data phases
13:47:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:47:36:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:47:41:setup_element:INFO: Data phase scan results for group 0, downlink 2
13:47:41:setup_element:INFO: Eye window for uplink 16: X___________________________________XXXX
Data delay found: 18
13:47:41:setup_element:INFO: Eye window for uplink 17: ________________________________XXXXX___
Data delay found: 14
13:47:41:setup_element:INFO: Eye window for uplink 18: XX__________________________________XXXX
Data delay found: 18
13:47:41:setup_element:INFO: Eye window for uplink 19: __________________________________XXXX__
Data delay found: 15
13:47:41:setup_element:INFO: Eye window for uplink 20: ____________________________________XXXX
Data delay found: 17
13:47:41:setup_element:INFO: Eye window for uplink 21: __________________________________XXXXX_
Data delay found: 16
13:47:41:setup_element:INFO: Eye window for uplink 22: XXX__________________________________XXX
Data delay found: 19
13:47:41:setup_element:INFO: Eye window for uplink 23: X__________________________________XXXXX
Data delay found: 17
13:47:41:setup_element:INFO: Eye window for uplink 24: ____XXXXXX______________________________
Data delay found: 26
13:47:41:setup_element:INFO: Eye window for uplink 25: _______XXXXX____________________________
Data delay found: 29
13:47:41:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
13:47:41:setup_element:INFO: Eye window for uplink 27: ___________XXXXXX_______________________
Data delay found: 33
13:47:41:setup_element:INFO: Eye window for uplink 28: _____________XXXXXX_____________________
Data delay found: 35
13:47:41:setup_element:INFO: Eye window for uplink 29: ______________XXXXXXX___________________
Data delay found: 37
13:47:41:setup_element:INFO: Eye window for uplink 30: _____________XXXXXXX____________________
Data delay found: 36
13:47:41:setup_element:INFO: Eye window for uplink 31: ____________XXXXXX______________________
Data delay found: 34
13:47:41:setup_element:INFO: Setting the data phase to 18 for uplink 16
13:47:41:setup_element:INFO: Setting the data phase to 14 for uplink 17
13:47:41:setup_element:INFO: Setting the data phase to 18 for uplink 18
13:47:41:setup_element:INFO: Setting the data phase to 15 for uplink 19
13:47:41:setup_element:INFO: Setting the data phase to 17 for uplink 20
13:47:41:setup_element:INFO: Setting the data phase to 16 for uplink 21
13:47:41:setup_element:INFO: Setting the data phase to 19 for uplink 22
13:47:41:setup_element:INFO: Setting the data phase to 17 for uplink 23
13:47:41:setup_element:INFO: Setting the data phase to 26 for uplink 24
13:47:41:setup_element:INFO: Setting the data phase to 29 for uplink 25
13:47:41:setup_element:INFO: Setting the data phase to 30 for uplink 26
13:47:41:setup_element:INFO: Setting the data phase to 33 for uplink 27
13:47:41:setup_element:INFO: Setting the data phase to 35 for uplink 28
13:47:41:setup_element:INFO: Setting the data phase to 37 for uplink 29
13:47:41:setup_element:INFO: Setting the data phase to 36 for uplink 30
13:47:41:setup_element:INFO: Setting the data phase to 34 for uplink 31
13:47:41:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXXX_
Uplink 17: _______________________________________________________________________XXXXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: _______________________________________________________________________XXXXXXXX_
Uplink 21: _______________________________________________________________________XXXXXXXX_
Uplink 22: ________________________________________________________________________XXXXXXX_
Uplink 23: ________________________________________________________________________XXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: X________________________________________________________________________XXXXXXX
Uplink 29: X________________________________________________________________________XXXXXXX
Uplink 30: X_______________________________________________________________________XXXXXXXX
Uplink 31: X_______________________________________________________________________XXXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 17:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 20:
Optimal Phase: 17
Window Length: 36
Eye Window: ____________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 22:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 23:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 24:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 28:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 29:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXXXX___________________
Uplink 30:
Optimal Phase: 36
Window Length: 33
Eye Window: _____________XXXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
]
13:47:41:setup_element:INFO: Beginning SMX ASICs map scan
13:47:41:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:47:41:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:47:41:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:47:41:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:47:41:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
13:47:41:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 23
13:47:41:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 22
13:47:41:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
13:47:41:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
13:47:41:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
13:47:41:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
13:47:42:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
13:47:42:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
13:47:42:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
13:47:42:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
13:47:42:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
13:47:42:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
13:47:42:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
13:47:42:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
13:47:42:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
13:47:42:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
13:47:43:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 35
Window Length: 70
Eye Windows:
Uplink 16: _______________________________________________________________________XXXXXXXX_
Uplink 17: _______________________________________________________________________XXXXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: _______________________________________________________________________XXXXXXXX_
Uplink 21: _______________________________________________________________________XXXXXXXX_
Uplink 22: ________________________________________________________________________XXXXXXX_
Uplink 23: ________________________________________________________________________XXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: X________________________________________________________________________XXXXXXX
Uplink 29: X________________________________________________________________________XXXXXXX
Uplink 30: X_______________________________________________________________________XXXXXXXX
Uplink 31: X_______________________________________________________________________XXXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 17:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 20:
Optimal Phase: 17
Window Length: 36
Eye Window: ____________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 22:
Optimal Phase: 19
Window Length: 34
Eye Window: XXX__________________________________XXX
Uplink 23:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 24:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 28:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 29:
Optimal Phase: 37
Window Length: 33
Eye Window: ______________XXXXXXX___________________
Uplink 30:
Optimal Phase: 36
Window Length: 33
Eye Window: _____________XXXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
13:47:43:setup_element:INFO: Performing Elink synchronization
13:47:43:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:47:43:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:47:43:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:47:43:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:47:44:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
13:47:44:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
13:47:44:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 2 | 0 | [23] | [(0, 23), (1, 22)]
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_23 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_23 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_0__upli_23
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
13:47:45:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:47:45:febtest:INFO: 23-00 | XA-000-08-002-000-004-067-13 | 28.2 | 1171.5
13:47:45:febtest:INFO: 30-01 | XA-000-08-002-000-004-074-13 | 28.2 | 1171.5
13:47:46:febtest:INFO: 21-02 | XA-000-08-002-000-004-080-10 | 18.7 | 1212.7
13:47:46:febtest:INFO: 28-03 | XA-000-08-002-000-004-078-13 | 9.3 | 1236.2
13:47:46:febtest:INFO: 19-04 | XA-000-08-002-000-004-075-13 | 34.6 | 1165.6
13:47:46:febtest:INFO: 26-05 | XA-000-08-002-000-004-069-13 | 28.2 | 1171.5
13:47:46:febtest:INFO: 17-06 | XA-000-08-002-000-003-249-06 | 40.9 | 1141.9
13:47:47:febtest:INFO: 24-07 | XA-000-08-002-000-004-068-13 | 21.9 | 1206.9
13:47:47:ST3_smx:INFO: Configuring SMX FAST
13:47:49:ST3_smx:INFO: chip: 23-0 21.902970 C 1195.082160 mV
13:47:49:ST3_smx:INFO: Electrons
13:47:49:ST3_smx:INFO: # loops 0
13:47:51:ST3_smx:INFO: # loops 1
13:47:52:ST3_smx:INFO: # loops 2
13:47:54:ST3_smx:INFO: Total # of broken channels: 0
13:47:54:ST3_smx:INFO: List of broken channels: []
13:47:54:ST3_smx:INFO: Total # of broken channels: 1
13:47:54:ST3_smx:INFO: List of broken channels: [109]
13:47:55:ST3_smx:INFO: Configuring SMX FAST
13:47:57:ST3_smx:INFO: chip: 30-1 18.745682 C 1206.851500 mV
13:47:57:ST3_smx:INFO: Electrons
13:47:57:ST3_smx:INFO: # loops 0
13:47:58:ST3_smx:INFO: # loops 1
13:48:00:ST3_smx:INFO: # loops 2
13:48:02:ST3_smx:INFO: Total # of broken channels: 0
13:48:02:ST3_smx:INFO: List of broken channels: []
13:48:02:ST3_smx:INFO: Total # of broken channels: 0
13:48:02:ST3_smx:INFO: List of broken channels: []
13:48:03:ST3_smx:INFO: Configuring SMX FAST
13:48:05:ST3_smx:INFO: chip: 21-2 21.902970 C 1195.082160 mV
13:48:05:ST3_smx:INFO: Electrons
13:48:05:ST3_smx:INFO: # loops 0
13:48:06:ST3_smx:INFO: # loops 1
13:48:08:ST3_smx:INFO: # loops 2
13:48:09:ST3_smx:INFO: Total # of broken channels: 0
13:48:09:ST3_smx:INFO: List of broken channels: []
13:48:09:ST3_smx:INFO: Total # of broken channels: 4
13:48:09:ST3_smx:INFO: List of broken channels: [5, 7, 9, 11]
13:48:10:ST3_smx:INFO: Configuring SMX FAST
13:48:12:ST3_smx:INFO: chip: 28-3 21.902970 C 1206.851500 mV
13:48:12:ST3_smx:INFO: Electrons
13:48:12:ST3_smx:INFO: # loops 0
13:48:14:ST3_smx:INFO: # loops 1
13:48:15:ST3_smx:INFO: # loops 2
13:48:17:ST3_smx:INFO: Total # of broken channels: 0
13:48:17:ST3_smx:INFO: List of broken channels: []
13:48:17:ST3_smx:INFO: Total # of broken channels: 6
13:48:17:ST3_smx:INFO: List of broken channels: [110, 112, 114, 116, 118, 120]
13:48:18:ST3_smx:INFO: Configuring SMX FAST
13:48:20:ST3_smx:INFO: chip: 19-4 34.556970 C 1165.571835 mV
13:48:20:ST3_smx:INFO: Electrons
13:48:20:ST3_smx:INFO: # loops 0
13:48:22:ST3_smx:INFO: # loops 1
13:48:23:ST3_smx:INFO: # loops 2
13:48:25:ST3_smx:INFO: Total # of broken channels: 0
13:48:25:ST3_smx:INFO: List of broken channels: []
13:48:25:ST3_smx:INFO: Total # of broken channels: 0
13:48:25:ST3_smx:INFO: List of broken channels: []
13:48:26:ST3_smx:INFO: Configuring SMX FAST
13:48:28:ST3_smx:INFO: chip: 26-5 31.389742 C 1165.571835 mV
13:48:28:ST3_smx:INFO: Electrons
13:48:28:ST3_smx:INFO: # loops 0
13:48:29:ST3_smx:INFO: # loops 1
13:48:31:ST3_smx:INFO: # loops 2
13:48:32:ST3_smx:INFO: Total # of broken channels: 0
13:48:32:ST3_smx:INFO: List of broken channels: []
13:48:32:ST3_smx:INFO: Total # of broken channels: 0
13:48:32:ST3_smx:INFO: List of broken channels: []
13:48:33:ST3_smx:INFO: Configuring SMX FAST
13:48:35:ST3_smx:INFO: chip: 17-6 44.073563 C 1135.937260 mV
13:48:35:ST3_smx:INFO: Electrons
13:48:35:ST3_smx:INFO: # loops 0
13:48:37:ST3_smx:INFO: # loops 1
13:48:38:ST3_smx:INFO: # loops 2
13:48:40:ST3_smx:INFO: Total # of broken channels: 0
13:48:40:ST3_smx:INFO: List of broken channels: []
13:48:40:ST3_smx:INFO: Total # of broken channels: 0
13:48:40:ST3_smx:INFO: List of broken channels: []
13:48:41:ST3_smx:INFO: Configuring SMX FAST
13:48:43:ST3_smx:INFO: chip: 24-7 25.062742 C 1195.082160 mV
13:48:43:ST3_smx:INFO: Electrons
13:48:43:ST3_smx:INFO: # loops 0
13:48:45:ST3_smx:INFO: # loops 1
13:48:46:ST3_smx:INFO: # loops 2
13:48:48:ST3_smx:INFO: Total # of broken channels: 0
13:48:48:ST3_smx:INFO: List of broken channels: []
13:48:48:ST3_smx:INFO: Total # of broken channels: 0
13:48:48:ST3_smx:INFO: List of broken channels: []
13:48:49:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:48:49:febtest:INFO: 23-00 | XA-000-08-002-000-004-067-13 | 21.9 | 1195.1
13:48:49:febtest:INFO: 30-01 | XA-000-08-002-000-004-074-13 | 18.7 | 1212.7
13:48:49:febtest:INFO: 21-02 | XA-000-08-002-000-004-080-10 | 25.1 | 1195.1
13:48:50:febtest:INFO: 28-03 | XA-000-08-002-000-004-078-13 | 21.9 | 1206.9
13:48:50:febtest:INFO: 19-04 | XA-000-08-002-000-004-075-13 | 37.7 | 1165.6
13:48:50:febtest:INFO: 26-05 | XA-000-08-002-000-004-069-13 | 31.4 | 1165.6
13:48:50:febtest:INFO: 17-06 | XA-000-08-002-000-003-249-06 | 44.1 | 1130.0
13:48:50:febtest:INFO: 24-07 | XA-000-08-002-000-004-068-13 | 25.1 | 1195.1
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_27-13_47_20
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2120
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9460', '1.849', '2.4800']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9700', '1.850', '0.3136']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9660', '1.850', '0.3136']
13:48:56:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
13:50:28:febtest:INFO: FEB type: 8.2
13:50:28:febtest:INFO: FEB SN: 2121
13:50:32:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:50:32:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
13:50:32:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:50:32:febtest:INFO: Testing FEB with SN 2121
13:50:35:smx_tester:INFO: Scanning setup
13:50:35:elinks:INFO: Disabling clock on downlink 0
13:50:35:elinks:INFO: Disabling clock on downlink 1
13:50:35:elinks:INFO: Disabling clock on downlink 2
13:50:35:elinks:INFO: Disabling clock on downlink 3
13:50:35:elinks:INFO: Disabling clock on downlink 4
13:50:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:50:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
13:50:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:50:35:elinks:INFO: Disabling clock on downlink 0
13:50:35:elinks:INFO: Disabling clock on downlink 1
13:50:35:elinks:INFO: Disabling clock on downlink 2
13:50:35:elinks:INFO: Disabling clock on downlink 3
13:50:35:elinks:INFO: Disabling clock on downlink 4
13:50:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:50:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:50:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:50:35:elinks:INFO: Disabling clock on downlink 0
13:50:35:elinks:INFO: Disabling clock on downlink 1
13:50:35:elinks:INFO: Disabling clock on downlink 2
13:50:35:elinks:INFO: Disabling clock on downlink 3
13:50:35:elinks:INFO: Disabling clock on downlink 4
13:50:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:50:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
13:50:35:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
13:50:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:50:35:elinks:INFO: Disabling clock on downlink 0
13:50:35:elinks:INFO: Disabling clock on downlink 1
13:50:35:elinks:INFO: Disabling clock on downlink 2
13:50:35:elinks:INFO: Disabling clock on downlink 3
13:50:35:elinks:INFO: Disabling clock on downlink 4
13:50:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:50:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
13:50:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:50:35:elinks:INFO: Disabling clock on downlink 0
13:50:36:elinks:INFO: Disabling clock on downlink 1
13:50:36:elinks:INFO: Disabling clock on downlink 2
13:50:36:elinks:INFO: Disabling clock on downlink 3
13:50:36:elinks:INFO: Disabling clock on downlink 4
13:50:36:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:50:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
13:50:36:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:50:36:setup_element:INFO: Scanning clock phase
13:50:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:50:36:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:50:36:setup_element:INFO: Clock phase scan results for group 0, downlink 2
13:50:36:setup_element:INFO: Eye window for uplink 16: _________________________________________________________________________XXXXXXX
Clock Delay: 36
13:50:36:setup_element:INFO: Eye window for uplink 17: _________________________________________________________________________XXXXXXX
Clock Delay: 36
13:50:36:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:50:36:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:50:36:setup_element:INFO: Eye window for uplink 20: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:50:36:setup_element:INFO: Eye window for uplink 21: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:50:36:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:50:36:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:50:36:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:50:36:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:50:36:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:50:36:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:50:36:setup_element:INFO: Eye window for uplink 30: _________________________________________________________________________XXXXXX_
Clock Delay: 35
13:50:36:setup_element:INFO: Eye window for uplink 31: _________________________________________________________________________XXXXXX_
Clock Delay: 35
13:50:36:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
13:50:36:setup_element:INFO: Scanning data phases
13:50:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:50:36:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:50:42:setup_element:INFO: Data phase scan results for group 0, downlink 2
13:50:42:setup_element:INFO: Eye window for uplink 16: XXXX____________________________________
Data delay found: 21
13:50:42:setup_element:INFO: Eye window for uplink 17: X___________________________________XXXX
Data delay found: 18
13:50:42:setup_element:INFO: Eye window for uplink 18: XXX_________________________________XXXX
Data delay found: 19
13:50:42:setup_element:INFO: Eye window for uplink 19: __________________________________XXXX__
Data delay found: 15
13:50:42:setup_element:INFO: Eye window for uplink 20: X____________________________________XXX
Data delay found: 18
13:50:42:setup_element:INFO: Eye window for uplink 21: X__________________________________XXXXX
Data delay found: 17
13:50:42:setup_element:INFO: Eye window for uplink 24: _______XXXXX____________________________
Data delay found: 29
13:50:42:setup_element:INFO: Eye window for uplink 25: _________XXXXX__________________________
Data delay found: 31
13:50:42:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
13:50:42:setup_element:INFO: Eye window for uplink 27: ____________XXXXX_______________________
Data delay found: 34
13:50:42:setup_element:INFO: Eye window for uplink 28: ____________XXXXX_______________________
Data delay found: 34
13:50:42:setup_element:INFO: Eye window for uplink 29: _____________XXXXX______________________
Data delay found: 35
13:50:42:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
13:50:42:setup_element:INFO: Eye window for uplink 31: _____________XXXXX______________________
Data delay found: 35
13:50:42:setup_element:INFO: Setting the data phase to 21 for uplink 16
13:50:42:setup_element:INFO: Setting the data phase to 18 for uplink 17
13:50:42:setup_element:INFO: Setting the data phase to 19 for uplink 18
13:50:42:setup_element:INFO: Setting the data phase to 15 for uplink 19
13:50:42:setup_element:INFO: Setting the data phase to 18 for uplink 20
13:50:42:setup_element:INFO: Setting the data phase to 17 for uplink 21
13:50:42:setup_element:INFO: Setting the data phase to 29 for uplink 24
13:50:42:setup_element:INFO: Setting the data phase to 31 for uplink 25
13:50:42:setup_element:INFO: Setting the data phase to 30 for uplink 26
13:50:42:setup_element:INFO: Setting the data phase to 34 for uplink 27
13:50:42:setup_element:INFO: Setting the data phase to 34 for uplink 28
13:50:42:setup_element:INFO: Setting the data phase to 35 for uplink 29
13:50:42:setup_element:INFO: Setting the data phase to 36 for uplink 30
13:50:42:setup_element:INFO: Setting the data phase to 35 for uplink 31
13:50:42:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _________________________________________________________________________XXXXXXX
Uplink 17: _________________________________________________________________________XXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: _________________________________________________________________________XXXXXX_
Uplink 31: _________________________________________________________________________XXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 36
Eye Window: XXXX____________________________________
Uplink 17:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 18:
Optimal Phase: 19
Window Length: 33
Eye Window: XXX_________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 36
Eye Window: X____________________________________XXX
Uplink 21:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 24:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
]
13:50:42:setup_element:INFO: Beginning SMX ASICs map scan
13:50:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:50:42:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:50:42:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:50:42:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:50:42:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
13:50:42:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
13:50:42:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
13:50:42:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
13:50:42:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
13:50:42:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
13:50:42:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
13:50:42:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
13:50:42:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
13:50:43:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
13:50:43:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
13:50:43:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
13:50:43:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
13:50:43:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
13:50:43:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
13:50:44:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _________________________________________________________________________XXXXXXX
Uplink 17: _________________________________________________________________________XXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: _________________________________________________________________________XXXXXX_
Uplink 31: _________________________________________________________________________XXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 36
Eye Window: XXXX____________________________________
Uplink 17:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 18:
Optimal Phase: 19
Window Length: 33
Eye Window: XXX_________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 36
Eye Window: X____________________________________XXX
Uplink 21:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 24:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
13:50:44:setup_element:INFO: Performing Elink synchronization
13:50:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:50:44:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:50:44:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:50:44:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:50:44:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
13:50:44:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
13:50:45:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
13:50:45:smx_tester:INFO: Scanning setup
13:50:45:elinks:INFO: Disabling clock on downlink 0
13:50:45:elinks:INFO: Disabling clock on downlink 1
13:50:45:elinks:INFO: Disabling clock on downlink 2
13:50:45:elinks:INFO: Disabling clock on downlink 3
13:50:45:elinks:INFO: Disabling clock on downlink 4
13:50:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:50:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
13:50:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:50:45:elinks:INFO: Disabling clock on downlink 0
13:50:45:elinks:INFO: Disabling clock on downlink 1
13:50:45:elinks:INFO: Disabling clock on downlink 2
13:50:45:elinks:INFO: Disabling clock on downlink 3
13:50:45:elinks:INFO: Disabling clock on downlink 4
13:50:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:50:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:50:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:50:46:elinks:INFO: Disabling clock on downlink 0
13:50:46:elinks:INFO: Disabling clock on downlink 1
13:50:46:elinks:INFO: Disabling clock on downlink 2
13:50:46:elinks:INFO: Disabling clock on downlink 3
13:50:46:elinks:INFO: Disabling clock on downlink 4
13:50:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:50:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
13:50:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
13:50:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:50:46:elinks:INFO: Disabling clock on downlink 0
13:50:46:elinks:INFO: Disabling clock on downlink 1
13:50:46:elinks:INFO: Disabling clock on downlink 2
13:50:46:elinks:INFO: Disabling clock on downlink 3
13:50:46:elinks:INFO: Disabling clock on downlink 4
13:50:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:50:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
13:50:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:50:46:elinks:INFO: Disabling clock on downlink 0
13:50:46:elinks:INFO: Disabling clock on downlink 1
13:50:46:elinks:INFO: Disabling clock on downlink 2
13:50:46:elinks:INFO: Disabling clock on downlink 3
13:50:46:elinks:INFO: Disabling clock on downlink 4
13:50:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:50:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
13:50:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:50:46:setup_element:INFO: Scanning clock phase
13:50:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:50:46:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:50:46:setup_element:INFO: Clock phase scan results for group 0, downlink 2
13:50:46:setup_element:INFO: Eye window for uplink 16: _________________________________________________________________________XXXXXX_
Clock Delay: 35
13:50:46:setup_element:INFO: Eye window for uplink 17: _________________________________________________________________________XXXXXX_
Clock Delay: 35
13:50:46:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:50:46:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:50:46:setup_element:INFO: Eye window for uplink 20: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:50:46:setup_element:INFO: Eye window for uplink 21: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:50:46:setup_element:INFO: Eye window for uplink 24: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:50:46:setup_element:INFO: Eye window for uplink 25: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:50:46:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:50:46:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:50:46:setup_element:INFO: Eye window for uplink 28: ________________________________________________________________________________
Clock Delay: 40
13:50:46:setup_element:INFO: Eye window for uplink 29: ________________________________________________________________________________
Clock Delay: 40
13:50:46:setup_element:INFO: Eye window for uplink 30: _________________________________________________________________________XXXXXXX
Clock Delay: 36
13:50:46:setup_element:INFO: Eye window for uplink 31: _________________________________________________________________________XXXXXXX
Clock Delay: 36
13:50:46:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
13:50:46:setup_element:INFO: Scanning data phases
13:50:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:50:47:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:50:52:setup_element:INFO: Data phase scan results for group 0, downlink 2
13:50:52:setup_element:INFO: Eye window for uplink 16: XXXX____________________________________
Data delay found: 21
13:50:52:setup_element:INFO: Eye window for uplink 17: X___________________________________XXXX
Data delay found: 18
13:50:52:setup_element:INFO: Eye window for uplink 18: XX__________________________________XXXX
Data delay found: 18
13:50:52:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXX__
Data delay found: 15
13:50:52:setup_element:INFO: Eye window for uplink 20: X___________________________________XXXX
Data delay found: 18
13:50:52:setup_element:INFO: Eye window for uplink 21: ___________________________________XXXXX
Data delay found: 17
13:50:52:setup_element:INFO: Eye window for uplink 24: _______XXXXX____________________________
Data delay found: 29
13:50:52:setup_element:INFO: Eye window for uplink 25: __________XXXXX_________________________
Data delay found: 32
13:50:52:setup_element:INFO: Eye window for uplink 26: _________XXXXX__________________________
Data delay found: 31
13:50:52:setup_element:INFO: Eye window for uplink 27: ____________XXXXX_______________________
Data delay found: 34
13:50:52:setup_element:INFO: Eye window for uplink 28: ____________XXXXXX______________________
Data delay found: 34
13:50:52:setup_element:INFO: Eye window for uplink 29: ______________XXXXX_____________________
Data delay found: 36
13:50:52:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
13:50:52:setup_element:INFO: Eye window for uplink 31: _____________XXXXX______________________
Data delay found: 35
13:50:52:setup_element:INFO: Setting the data phase to 21 for uplink 16
13:50:52:setup_element:INFO: Setting the data phase to 18 for uplink 17
13:50:52:setup_element:INFO: Setting the data phase to 18 for uplink 18
13:50:52:setup_element:INFO: Setting the data phase to 15 for uplink 19
13:50:52:setup_element:INFO: Setting the data phase to 18 for uplink 20
13:50:52:setup_element:INFO: Setting the data phase to 17 for uplink 21
13:50:52:setup_element:INFO: Setting the data phase to 29 for uplink 24
13:50:52:setup_element:INFO: Setting the data phase to 32 for uplink 25
13:50:52:setup_element:INFO: Setting the data phase to 31 for uplink 26
13:50:52:setup_element:INFO: Setting the data phase to 34 for uplink 27
13:50:52:setup_element:INFO: Setting the data phase to 34 for uplink 28
13:50:52:setup_element:INFO: Setting the data phase to 36 for uplink 29
13:50:52:setup_element:INFO: Setting the data phase to 36 for uplink 30
13:50:52:setup_element:INFO: Setting the data phase to 35 for uplink 31
13:50:52:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _________________________________________________________________________XXXXXX_
Uplink 17: _________________________________________________________________________XXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXXX
Uplink 19: _______________________________________________________________________XXXXXXXXX
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: ________________________________________________________________________XXXXXXX_
Uplink 25: ________________________________________________________________________XXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: ________________________________________________________________________________
Uplink 29: ________________________________________________________________________________
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 36
Eye Window: XXXX____________________________________
Uplink 17:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 24:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 25:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 26:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 29:
Optimal Phase: 36
Window Length: 35
Eye Window: ______________XXXXX_____________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
]
13:50:52:setup_element:INFO: Beginning SMX ASICs map scan
13:50:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:50:52:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:50:52:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:50:52:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:50:52:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
13:50:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
13:50:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
13:50:52:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
13:50:52:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
13:50:53:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
13:50:53:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
13:50:53:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
13:50:53:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
13:50:53:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
13:50:53:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
13:50:53:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
13:50:53:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
13:50:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
13:50:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
13:50:55:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _________________________________________________________________________XXXXXX_
Uplink 17: _________________________________________________________________________XXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXXX
Uplink 19: _______________________________________________________________________XXXXXXXXX
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: ________________________________________________________________________XXXXXXX_
Uplink 25: ________________________________________________________________________XXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: ________________________________________________________________________________
Uplink 29: ________________________________________________________________________________
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 36
Eye Window: XXXX____________________________________
Uplink 17:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 24:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 25:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 26:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 29:
Optimal Phase: 36
Window Length: 35
Eye Window: ______________XXXXX_____________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
13:50:55:setup_element:INFO: Performing Elink synchronization
13:50:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:50:55:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:50:55:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:50:55:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:50:55:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
13:50:55:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
13:50:55:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
13:50:56:febtest:ERROR: HW addres 1 != 0
13:51:00:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:51:00:febtest:INFO: 30-01 | XA-000-08-002-000-004-024-15 | 12.4 | 1242.0
13:51:01:febtest:INFO: 21-02 | XA-000-08-002-000-004-021-15 | 53.6 | 1112.1
13:51:01:febtest:INFO: 28-03 | XA-000-08-002-000-004-020-15 | 12.4 | 1242.0
13:51:01:febtest:INFO: 19-04 | XA-000-08-002-000-004-029-15 | 31.4 | 1177.4
13:51:01:febtest:INFO: 26-05 | XA-000-08-002-000-004-035-06 | 28.2 | 1189.2
13:51:01:febtest:INFO: 17-06 | XA-000-08-002-000-004-033-06 | 31.4 | 1177.4
13:51:02:febtest:INFO: 24-07 | XA-000-08-002-000-004-034-06 | 18.7 | 1224.5
13:51:02:ST3_smx:INFO: Configuring SMX FAST
13:51:04:ST3_smx:INFO: chip: 30-1 25.062742 C 1206.851500 mV
13:51:04:ST3_smx:INFO: Electrons
13:51:04:ST3_smx:INFO: # loops 0
13:51:05:ST3_smx:INFO: # loops 1
13:51:07:ST3_smx:INFO: # loops 2
13:51:09:ST3_smx:INFO: Total # of broken channels: 0
13:51:09:ST3_smx:INFO: List of broken channels: []
13:51:09:ST3_smx:INFO: Total # of broken channels: 0
13:51:09:ST3_smx:INFO: List of broken channels: []
13:51:10:ST3_smx:INFO: Configuring SMX FAST
13:51:11:ST3_smx:INFO: chip: 21-2 47.250730 C 1129.995435 mV
13:51:11:ST3_smx:INFO: Electrons
13:51:11:ST3_smx:INFO: # loops 0
13:51:13:ST3_smx:INFO: # loops 1
13:51:15:ST3_smx:INFO: # loops 2
13:51:16:ST3_smx:INFO: Total # of broken channels: 0
13:51:16:ST3_smx:INFO: List of broken channels: []
13:51:16:ST3_smx:INFO: Total # of broken channels: 0
13:51:16:ST3_smx:INFO: List of broken channels: []
13:51:17:ST3_smx:INFO: Configuring SMX FAST
13:51:19:ST3_smx:INFO: chip: 28-3 21.902970 C 1212.728715 mV
13:51:19:ST3_smx:INFO: Electrons
13:51:19:ST3_smx:INFO: # loops 0
13:51:21:ST3_smx:INFO: # loops 1
13:51:23:ST3_smx:INFO: # loops 2
13:51:24:ST3_smx:INFO: Total # of broken channels: 0
13:51:24:ST3_smx:INFO: List of broken channels: []
13:51:24:ST3_smx:INFO: Total # of broken channels: 0
13:51:24:ST3_smx:INFO: List of broken channels: []
13:51:25:ST3_smx:INFO: Configuring SMX FAST
13:51:27:ST3_smx:INFO: chip: 19-4 31.389742 C 1183.292940 mV
13:51:27:ST3_smx:INFO: Electrons
13:51:27:ST3_smx:INFO: # loops 0
13:51:29:ST3_smx:INFO: # loops 1
13:51:30:ST3_smx:INFO: # loops 2
13:51:32:ST3_smx:INFO: Total # of broken channels: 0
13:51:32:ST3_smx:INFO: List of broken channels: []
13:51:32:ST3_smx:INFO: Total # of broken channels: 0
13:51:32:ST3_smx:INFO: List of broken channels: []
13:51:33:ST3_smx:INFO: Configuring SMX FAST
13:51:35:ST3_smx:INFO: chip: 26-5 37.726682 C 1165.571835 mV
13:51:35:ST3_smx:INFO: Electrons
13:51:35:ST3_smx:INFO: # loops 0
13:51:37:ST3_smx:INFO: # loops 1
13:51:38:ST3_smx:INFO: # loops 2
13:51:40:ST3_smx:INFO: Total # of broken channels: 0
13:51:40:ST3_smx:INFO: List of broken channels: []
13:51:40:ST3_smx:INFO: Total # of broken channels: 1
13:51:40:ST3_smx:INFO: List of broken channels: [4]
13:51:41:ST3_smx:INFO: Configuring SMX FAST
13:51:43:ST3_smx:INFO: chip: 17-6 34.556970 C 1171.483840 mV
13:51:43:ST3_smx:INFO: Electrons
13:51:43:ST3_smx:INFO: # loops 0
13:51:44:ST3_smx:INFO: # loops 1
13:51:46:ST3_smx:INFO: # loops 2
13:51:48:ST3_smx:INFO: Total # of broken channels: 0
13:51:48:ST3_smx:INFO: List of broken channels: []
13:51:48:ST3_smx:INFO: Total # of broken channels: 0
13:51:48:ST3_smx:INFO: List of broken channels: []
13:51:49:ST3_smx:INFO: Configuring SMX FAST
13:51:51:ST3_smx:INFO: chip: 24-7 25.062742 C 1206.851500 mV
13:51:51:ST3_smx:INFO: Electrons
13:51:51:ST3_smx:INFO: # loops 0
13:51:52:ST3_smx:INFO: # loops 1
13:51:54:ST3_smx:INFO: # loops 2
13:51:56:ST3_smx:INFO: Total # of broken channels: 0
13:51:56:ST3_smx:INFO: List of broken channels: []
13:51:56:ST3_smx:INFO: Total # of broken channels: 16
13:51:56:ST3_smx:INFO: List of broken channels: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 33]
13:51:56:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:51:57:febtest:INFO: 30-01 | XA-000-08-002-000-004-024-15 | 25.1 | 1206.9
13:51:57:febtest:INFO: 21-02 | XA-000-08-002-000-004-021-15 | 47.3 | 1130.0
13:51:57:febtest:INFO: 28-03 | XA-000-08-002-000-004-020-15 | 21.9 | 1218.6
13:51:57:febtest:INFO: 19-04 | XA-000-08-002-000-004-029-15 | 34.6 | 1183.3
13:51:58:febtest:INFO: 26-05 | XA-000-08-002-000-004-035-06 | 37.7 | 1165.6
13:51:58:febtest:INFO: 17-06 | XA-000-08-002-000-004-033-06 | 37.7 | 1171.5
13:51:58:febtest:INFO: 24-07 | XA-000-08-002-000-004-034-06 | 25.1 | 1206.9
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_27-13_50_32
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2121
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.449', '1.8270', '1.850', '2.2500']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9140', '1.850', '0.7791']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9100', '1.850', '0.7772']
13:52:02:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
13:52:25:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:52:25:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
13:52:25:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:52:25:febtest:INFO: Testing FEB with SN 2121
13:52:28:smx_tester:INFO: Scanning setup
13:52:28:elinks:INFO: Disabling clock on downlink 0
13:52:28:elinks:INFO: Disabling clock on downlink 1
13:52:28:elinks:INFO: Disabling clock on downlink 2
13:52:28:elinks:INFO: Disabling clock on downlink 3
13:52:28:elinks:INFO: Disabling clock on downlink 4
13:52:28:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:52:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
13:52:28:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:52:28:elinks:INFO: Disabling clock on downlink 0
13:52:28:elinks:INFO: Disabling clock on downlink 1
13:52:28:elinks:INFO: Disabling clock on downlink 2
13:52:28:elinks:INFO: Disabling clock on downlink 3
13:52:28:elinks:INFO: Disabling clock on downlink 4
13:52:28:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:52:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:52:28:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:52:28:elinks:INFO: Disabling clock on downlink 0
13:52:28:elinks:INFO: Disabling clock on downlink 1
13:52:28:elinks:INFO: Disabling clock on downlink 2
13:52:28:elinks:INFO: Disabling clock on downlink 3
13:52:28:elinks:INFO: Disabling clock on downlink 4
13:52:28:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:52:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
13:52:28:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
13:52:28:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:52:28:elinks:INFO: Disabling clock on downlink 0
13:52:28:elinks:INFO: Disabling clock on downlink 1
13:52:28:elinks:INFO: Disabling clock on downlink 2
13:52:28:elinks:INFO: Disabling clock on downlink 3
13:52:28:elinks:INFO: Disabling clock on downlink 4
13:52:28:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:52:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
13:52:29:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:52:29:elinks:INFO: Disabling clock on downlink 0
13:52:29:elinks:INFO: Disabling clock on downlink 1
13:52:29:elinks:INFO: Disabling clock on downlink 2
13:52:29:elinks:INFO: Disabling clock on downlink 3
13:52:29:elinks:INFO: Disabling clock on downlink 4
13:52:29:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:52:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
13:52:29:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:52:29:setup_element:INFO: Scanning clock phase
13:52:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:52:29:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:52:29:setup_element:INFO: Clock phase scan results for group 0, downlink 2
13:52:29:setup_element:INFO: Eye window for uplink 16: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
13:52:29:setup_element:INFO: Eye window for uplink 17: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
13:52:29:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:52:29:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:52:29:setup_element:INFO: Eye window for uplink 20: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
13:52:29:setup_element:INFO: Eye window for uplink 21: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
13:52:29:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:52:29:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:52:29:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:52:29:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:52:29:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:52:29:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:52:29:setup_element:INFO: Eye window for uplink 30: _________________________________________________________________________XXXXXXX
Clock Delay: 36
13:52:29:setup_element:INFO: Eye window for uplink 31: _________________________________________________________________________XXXXXXX
Clock Delay: 36
13:52:29:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
13:52:29:setup_element:INFO: Scanning data phases
13:52:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:52:29:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:52:34:setup_element:INFO: Data phase scan results for group 0, downlink 2
13:52:35:setup_element:INFO: Eye window for uplink 16: _XXXX__________________________________X
Data delay found: 21
13:52:35:setup_element:INFO: Eye window for uplink 17: X__________________________________XXXXX
Data delay found: 17
13:52:35:setup_element:INFO: Eye window for uplink 18: XXX_________________________________XXXX
Data delay found: 19
13:52:35:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXX__
Data delay found: 15
13:52:35:setup_element:INFO: Eye window for uplink 20: X___________________________________XXXX
Data delay found: 18
13:52:35:setup_element:INFO: Eye window for uplink 21: X__________________________________XXXXX
Data delay found: 17
13:52:35:setup_element:INFO: Eye window for uplink 24: _______XXXXX____________________________
Data delay found: 29
13:52:35:setup_element:INFO: Eye window for uplink 25: __________XXXX__________________________
Data delay found: 31
13:52:35:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
13:52:35:setup_element:INFO: Eye window for uplink 27: ____________XXXX________________________
Data delay found: 33
13:52:35:setup_element:INFO: Eye window for uplink 28: ____________XXXXX_______________________
Data delay found: 34
13:52:35:setup_element:INFO: Eye window for uplink 29: ______________XXXXX_____________________
Data delay found: 36
13:52:35:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
13:52:35:setup_element:INFO: Eye window for uplink 31: _____________XXXXX______________________
Data delay found: 35
13:52:35:setup_element:INFO: Setting the data phase to 21 for uplink 16
13:52:35:setup_element:INFO: Setting the data phase to 17 for uplink 17
13:52:35:setup_element:INFO: Setting the data phase to 19 for uplink 18
13:52:35:setup_element:INFO: Setting the data phase to 15 for uplink 19
13:52:35:setup_element:INFO: Setting the data phase to 18 for uplink 20
13:52:35:setup_element:INFO: Setting the data phase to 17 for uplink 21
13:52:35:setup_element:INFO: Setting the data phase to 29 for uplink 24
13:52:35:setup_element:INFO: Setting the data phase to 31 for uplink 25
13:52:35:setup_element:INFO: Setting the data phase to 30 for uplink 26
13:52:35:setup_element:INFO: Setting the data phase to 33 for uplink 27
13:52:35:setup_element:INFO: Setting the data phase to 34 for uplink 28
13:52:35:setup_element:INFO: Setting the data phase to 36 for uplink 29
13:52:35:setup_element:INFO: Setting the data phase to 36 for uplink 30
13:52:35:setup_element:INFO: Setting the data phase to 35 for uplink 31
13:52:35:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXXX
Uplink 17: ________________________________________________________________________XXXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXXX
Uplink 19: _______________________________________________________________________XXXXXXXXX
Uplink 20: ______________________________________________________________________XXXXXXXXX_
Uplink 21: ______________________________________________________________________XXXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 34
Eye Window: _XXXX__________________________________X
Uplink 17:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 18:
Optimal Phase: 19
Window Length: 33
Eye Window: XXX_________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 24:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 36
Eye Window: __________XXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 36
Eye Window: ____________XXXX________________________
Uplink 28:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 29:
Optimal Phase: 36
Window Length: 35
Eye Window: ______________XXXXX_____________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
]
13:52:35:setup_element:INFO: Beginning SMX ASICs map scan
13:52:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:52:35:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:52:35:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:52:35:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:52:35:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
13:52:35:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
13:52:35:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
13:52:35:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
13:52:35:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
13:52:35:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
13:52:35:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
13:52:35:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
13:52:35:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
13:52:36:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
13:52:36:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
13:52:36:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
13:52:36:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
13:52:36:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
13:52:36:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
13:52:37:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXXX
Uplink 17: ________________________________________________________________________XXXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXXX
Uplink 19: _______________________________________________________________________XXXXXXXXX
Uplink 20: ______________________________________________________________________XXXXXXXXX_
Uplink 21: ______________________________________________________________________XXXXXXXXX_
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 34
Eye Window: _XXXX__________________________________X
Uplink 17:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 18:
Optimal Phase: 19
Window Length: 33
Eye Window: XXX_________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 24:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 36
Eye Window: __________XXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 36
Eye Window: ____________XXXX________________________
Uplink 28:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 29:
Optimal Phase: 36
Window Length: 35
Eye Window: ______________XXXXX_____________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
13:52:37:setup_element:INFO: Performing Elink synchronization
13:52:37:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:52:37:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:52:37:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:52:37:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:52:37:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
13:52:37:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
13:52:37:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
13:52:38:smx_tester:INFO: Scanning setup
13:52:38:elinks:INFO: Disabling clock on downlink 0
13:52:38:elinks:INFO: Disabling clock on downlink 1
13:52:38:elinks:INFO: Disabling clock on downlink 2
13:52:38:elinks:INFO: Disabling clock on downlink 3
13:52:38:elinks:INFO: Disabling clock on downlink 4
13:52:38:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:52:38:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
13:52:38:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:52:38:elinks:INFO: Disabling clock on downlink 0
13:52:38:elinks:INFO: Disabling clock on downlink 1
13:52:38:elinks:INFO: Disabling clock on downlink 2
13:52:38:elinks:INFO: Disabling clock on downlink 3
13:52:38:elinks:INFO: Disabling clock on downlink 4
13:52:38:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:52:38:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:52:38:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:52:38:elinks:INFO: Disabling clock on downlink 0
13:52:38:elinks:INFO: Disabling clock on downlink 1
13:52:38:elinks:INFO: Disabling clock on downlink 2
13:52:38:elinks:INFO: Disabling clock on downlink 3
13:52:38:elinks:INFO: Disabling clock on downlink 4
13:52:38:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:52:38:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
13:52:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
13:52:39:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:52:39:elinks:INFO: Disabling clock on downlink 0
13:52:39:elinks:INFO: Disabling clock on downlink 1
13:52:39:elinks:INFO: Disabling clock on downlink 2
13:52:39:elinks:INFO: Disabling clock on downlink 3
13:52:39:elinks:INFO: Disabling clock on downlink 4
13:52:39:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:52:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
13:52:39:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:52:39:elinks:INFO: Disabling clock on downlink 0
13:52:39:elinks:INFO: Disabling clock on downlink 1
13:52:39:elinks:INFO: Disabling clock on downlink 2
13:52:39:elinks:INFO: Disabling clock on downlink 3
13:52:39:elinks:INFO: Disabling clock on downlink 4
13:52:39:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:52:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
13:52:39:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:52:39:setup_element:INFO: Scanning clock phase
13:52:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:52:39:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:52:39:setup_element:INFO: Clock phase scan results for group 0, downlink 2
13:52:39:setup_element:INFO: Eye window for uplink 16: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:52:39:setup_element:INFO: Eye window for uplink 17: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:52:39:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:52:39:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:52:39:setup_element:INFO: Eye window for uplink 20: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:52:39:setup_element:INFO: Eye window for uplink 21: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:52:39:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:52:39:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:52:39:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:52:39:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
13:52:39:setup_element:INFO: Eye window for uplink 28: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:52:39:setup_element:INFO: Eye window for uplink 29: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:52:39:setup_element:INFO: Eye window for uplink 30: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:52:39:setup_element:INFO: Eye window for uplink 31: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:52:39:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
13:52:39:setup_element:INFO: Scanning data phases
13:52:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:52:39:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:52:44:setup_element:INFO: Data phase scan results for group 0, downlink 2
13:52:44:setup_element:INFO: Eye window for uplink 16: XXXX___________________________________X
Data delay found: 21
13:52:44:setup_element:INFO: Eye window for uplink 17: ___________________________________XXXX_
Data delay found: 16
13:52:44:setup_element:INFO: Eye window for uplink 18: XX__________________________________XXXX
Data delay found: 18
13:52:44:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXX__
Data delay found: 15
13:52:44:setup_element:INFO: Eye window for uplink 20: X___________________________________XXXX
Data delay found: 18
13:52:44:setup_element:INFO: Eye window for uplink 21: ___________________________________XXXXX
Data delay found: 17
13:52:44:setup_element:INFO: Eye window for uplink 24: ______XXXXX_____________________________
Data delay found: 28
13:52:44:setup_element:INFO: Eye window for uplink 25: _________XXXXX__________________________
Data delay found: 31
13:52:44:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
13:52:44:setup_element:INFO: Eye window for uplink 27: ____________XXXX________________________
Data delay found: 33
13:52:44:setup_element:INFO: Eye window for uplink 28: ___________XXXXXX_______________________
Data delay found: 33
13:52:44:setup_element:INFO: Eye window for uplink 29: _____________XXXXX______________________
Data delay found: 35
13:52:44:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
13:52:44:setup_element:INFO: Eye window for uplink 31: _____________XXXXX______________________
Data delay found: 35
13:52:44:setup_element:INFO: Setting the data phase to 21 for uplink 16
13:52:44:setup_element:INFO: Setting the data phase to 16 for uplink 17
13:52:44:setup_element:INFO: Setting the data phase to 18 for uplink 18
13:52:44:setup_element:INFO: Setting the data phase to 15 for uplink 19
13:52:44:setup_element:INFO: Setting the data phase to 18 for uplink 20
13:52:44:setup_element:INFO: Setting the data phase to 17 for uplink 21
13:52:44:setup_element:INFO: Setting the data phase to 28 for uplink 24
13:52:44:setup_element:INFO: Setting the data phase to 31 for uplink 25
13:52:44:setup_element:INFO: Setting the data phase to 30 for uplink 26
13:52:44:setup_element:INFO: Setting the data phase to 33 for uplink 27
13:52:44:setup_element:INFO: Setting the data phase to 33 for uplink 28
13:52:44:setup_element:INFO: Setting the data phase to 35 for uplink 29
13:52:44:setup_element:INFO: Setting the data phase to 36 for uplink 30
13:52:44:setup_element:INFO: Setting the data phase to 35 for uplink 31
13:52:44:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXX_
Uplink 17: ________________________________________________________________________XXXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: ______________________________________________________________________XXXXXXXX__
Uplink 29: ______________________________________________________________________XXXXXXXX__
Uplink 30: ________________________________________________________________________XXXXXXX_
Uplink 31: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 36
Eye Window: ____________XXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
]
13:52:44:setup_element:INFO: Beginning SMX ASICs map scan
13:52:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:52:44:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:52:44:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:52:44:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:52:44:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
13:52:44:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
13:52:44:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
13:52:45:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
13:52:45:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
13:52:45:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
13:52:45:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
13:52:45:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
13:52:45:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
13:52:45:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
13:52:45:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
13:52:45:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
13:52:45:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
13:52:45:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
13:52:45:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
13:52:47:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXX_
Uplink 17: ________________________________________________________________________XXXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: ______________________________________________________________________XXXXXXXX__
Uplink 29: ______________________________________________________________________XXXXXXXX__
Uplink 30: ________________________________________________________________________XXXXXXX_
Uplink 31: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 18:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 36
Eye Window: ____________XXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
13:52:47:setup_element:INFO: Performing Elink synchronization
13:52:47:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:52:47:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:52:47:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
13:52:47:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
13:52:47:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
13:52:47:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
13:52:47:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
13:52:48:febtest:ERROR: HW addres 1 != 0
13:54:07:febtest:INFO: FEB type: 8.2
13:54:07:febtest:INFO: FEB SN: 1119
13:54:08:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:54:08:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
13:54:08:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:54:09:febtest:INFO: Testing FEB with SN 1119
13:54:11:smx_tester:INFO: Scanning setup
13:54:11:elinks:INFO: Disabling clock on downlink 0
13:54:11:elinks:INFO: Disabling clock on downlink 1
13:54:11:elinks:INFO: Disabling clock on downlink 2
13:54:11:elinks:INFO: Disabling clock on downlink 3
13:54:11:elinks:INFO: Disabling clock on downlink 4
13:54:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:54:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
13:54:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:54:11:elinks:INFO: Disabling clock on downlink 0
13:54:11:elinks:INFO: Disabling clock on downlink 1
13:54:11:elinks:INFO: Disabling clock on downlink 2
13:54:11:elinks:INFO: Disabling clock on downlink 3
13:54:12:elinks:INFO: Disabling clock on downlink 4
13:54:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:54:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
13:54:12:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
13:54:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:54:12:elinks:INFO: Disabling clock on downlink 0
13:54:12:elinks:INFO: Disabling clock on downlink 1
13:54:12:elinks:INFO: Disabling clock on downlink 2
13:54:12:elinks:INFO: Disabling clock on downlink 3
13:54:12:elinks:INFO: Disabling clock on downlink 4
13:54:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:54:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:54:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:54:12:elinks:INFO: Disabling clock on downlink 0
13:54:12:elinks:INFO: Disabling clock on downlink 1
13:54:12:elinks:INFO: Disabling clock on downlink 2
13:54:12:elinks:INFO: Disabling clock on downlink 3
13:54:12:elinks:INFO: Disabling clock on downlink 4
13:54:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:54:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
13:54:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:54:12:elinks:INFO: Disabling clock on downlink 0
13:54:12:elinks:INFO: Disabling clock on downlink 1
13:54:12:elinks:INFO: Disabling clock on downlink 2
13:54:12:elinks:INFO: Disabling clock on downlink 3
13:54:12:elinks:INFO: Disabling clock on downlink 4
13:54:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:54:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
13:54:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:54:12:setup_element:INFO: Scanning clock phase
13:54:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:54:12:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:54:13:setup_element:INFO: Clock phase scan results for group 0, downlink 1
13:54:13:setup_element:INFO: Eye window for uplink 0 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:54:13:setup_element:INFO: Eye window for uplink 1 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:54:13:setup_element:INFO: Eye window for uplink 2 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:54:13:setup_element:INFO: Eye window for uplink 3 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
13:54:13:setup_element:INFO: Eye window for uplink 4 : ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
13:54:13:setup_element:INFO: Eye window for uplink 5 : ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
13:54:13:setup_element:INFO: Eye window for uplink 6 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:54:13:setup_element:INFO: Eye window for uplink 7 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:54:13:setup_element:INFO: Eye window for uplink 8 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:54:13:setup_element:INFO: Eye window for uplink 9 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:54:13:setup_element:INFO: Eye window for uplink 10: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:54:13:setup_element:INFO: Eye window for uplink 11: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:54:13:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
13:54:13:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
13:54:13:setup_element:INFO: Eye window for uplink 14: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:54:13:setup_element:INFO: Eye window for uplink 15: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:54:13:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
13:54:13:setup_element:INFO: Scanning data phases
13:54:13:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:54:13:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:54:18:setup_element:INFO: Data phase scan results for group 0, downlink 1
13:54:18:setup_element:INFO: Eye window for uplink 0 : ____________XXXXX_______________________
Data delay found: 34
13:54:18:setup_element:INFO: Eye window for uplink 1 : ________XXXX____________________________
Data delay found: 29
13:54:18:setup_element:INFO: Eye window for uplink 2 : ________XXXXX___________________________
Data delay found: 30
13:54:18:setup_element:INFO: Eye window for uplink 3 : _____XXXXX______________________________
Data delay found: 27
13:54:18:setup_element:INFO: Eye window for uplink 4 : ______XXXXX_____________________________
Data delay found: 28
13:54:18:setup_element:INFO: Eye window for uplink 5 : __XXXXX_________________________________
Data delay found: 24
13:54:18:setup_element:INFO: Eye window for uplink 6 : XXXX__________________________________XX
Data delay found: 20
13:54:18:setup_element:INFO: Eye window for uplink 7 : X_________________________________XXXXX_
Data delay found: 17
13:54:18:setup_element:INFO: Eye window for uplink 8 : ____________________________XXXX________
Data delay found: 9
13:54:18:setup_element:INFO: Eye window for uplink 9 : _________________________________XXXXX__
Data delay found: 15
13:54:18:setup_element:INFO: Eye window for uplink 10: _____________________________XXXXXX_____
Data delay found: 11
13:54:18:setup_element:INFO: Eye window for uplink 11: _________________________________XXXXX__
Data delay found: 15
13:54:18:setup_element:INFO: Eye window for uplink 12: ___________________________XXXXX________
Data delay found: 9
13:54:18:setup_element:INFO: Eye window for uplink 13: _____________________________XXXXXX_____
Data delay found: 11
13:54:18:setup_element:INFO: Eye window for uplink 14: ___________________________XXXXX________
Data delay found: 9
13:54:18:setup_element:INFO: Eye window for uplink 15: ____________________________XXXXXX______
Data delay found: 10
13:54:18:setup_element:INFO: Setting the data phase to 34 for uplink 0
13:54:18:setup_element:INFO: Setting the data phase to 29 for uplink 1
13:54:18:setup_element:INFO: Setting the data phase to 30 for uplink 2
13:54:18:setup_element:INFO: Setting the data phase to 27 for uplink 3
13:54:18:setup_element:INFO: Setting the data phase to 28 for uplink 4
13:54:18:setup_element:INFO: Setting the data phase to 24 for uplink 5
13:54:18:setup_element:INFO: Setting the data phase to 20 for uplink 6
13:54:18:setup_element:INFO: Setting the data phase to 17 for uplink 7
13:54:18:setup_element:INFO: Setting the data phase to 9 for uplink 8
13:54:18:setup_element:INFO: Setting the data phase to 15 for uplink 9
13:54:18:setup_element:INFO: Setting the data phase to 11 for uplink 10
13:54:18:setup_element:INFO: Setting the data phase to 15 for uplink 11
13:54:18:setup_element:INFO: Setting the data phase to 9 for uplink 12
13:54:18:setup_element:INFO: Setting the data phase to 11 for uplink 13
13:54:18:setup_element:INFO: Setting the data phase to 9 for uplink 14
13:54:18:setup_element:INFO: Setting the data phase to 10 for uplink 15
13:54:18:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXXX_
Uplink 1: _______________________________________________________________________XXXXXXXX_
Uplink 2: ________________________________________________________________________XXXXXXX_
Uplink 3: ________________________________________________________________________XXXXXXX_
Uplink 4: ______________________________________________________________________XXXXXXXXX_
Uplink 5: ______________________________________________________________________XXXXXXXXX_
Uplink 6: _______________________________________________________________________XXXXXXX__
Uplink 7: _______________________________________________________________________XXXXXXX__
Uplink 8: _______________________________________________________________________XXXXXXX__
Uplink 9: _______________________________________________________________________XXXXXXX__
Uplink 10: _______________________________________________________________________XXXXXXX__
Uplink 11: _______________________________________________________________________XXXXXXX__
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: _____________________________________________________________________XXXXXXXX___
Uplink 15: _____________________________________________________________________XXXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 2:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 3:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 4:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 5:
Optimal Phase: 24
Window Length: 35
Eye Window: __XXXXX_________________________________
Uplink 6:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 7:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 8:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 9:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 10:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 14:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 15:
Optimal Phase: 10
Window Length: 34
Eye Window: ____________________________XXXXXX______
]
13:54:18:setup_element:INFO: Beginning SMX ASICs map scan
13:54:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:54:18:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:54:18:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
13:54:18:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
13:54:18:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
13:54:18:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
13:54:18:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
13:54:19:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
13:54:19:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
13:54:19:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
13:54:19:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
13:54:19:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
13:54:19:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
13:54:19:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
13:54:19:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
13:54:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
13:54:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
13:54:19:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
13:54:19:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
13:54:20:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
13:54:20:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
13:54:21:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXXX_
Uplink 1: _______________________________________________________________________XXXXXXXX_
Uplink 2: ________________________________________________________________________XXXXXXX_
Uplink 3: ________________________________________________________________________XXXXXXX_
Uplink 4: ______________________________________________________________________XXXXXXXXX_
Uplink 5: ______________________________________________________________________XXXXXXXXX_
Uplink 6: _______________________________________________________________________XXXXXXX__
Uplink 7: _______________________________________________________________________XXXXXXX__
Uplink 8: _______________________________________________________________________XXXXXXX__
Uplink 9: _______________________________________________________________________XXXXXXX__
Uplink 10: _______________________________________________________________________XXXXXXX__
Uplink 11: _______________________________________________________________________XXXXXXX__
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: _____________________________________________________________________XXXXXXXX___
Uplink 15: _____________________________________________________________________XXXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 2:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 3:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 4:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 5:
Optimal Phase: 24
Window Length: 35
Eye Window: __XXXXX_________________________________
Uplink 6:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 7:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 8:
Optimal Phase: 9
Window Length: 36
Eye Window: ____________________________XXXX________
Uplink 9:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 10:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 14:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 15:
Optimal Phase: 10
Window Length: 34
Eye Window: ____________________________XXXXXX______
13:54:21:setup_element:INFO: Performing Elink synchronization
13:54:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:54:21:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:54:21:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
13:54:21:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
13:54:21:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
13:54:21:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
13:54:21:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
13:54:22:smx_tester:INFO: Scanning setup
13:54:22:elinks:INFO: Disabling clock on downlink 0
13:54:22:elinks:INFO: Disabling clock on downlink 1
13:54:22:elinks:INFO: Disabling clock on downlink 2
13:54:22:elinks:INFO: Disabling clock on downlink 3
13:54:22:elinks:INFO: Disabling clock on downlink 4
13:54:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:54:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
13:54:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:54:22:elinks:INFO: Disabling clock on downlink 0
13:54:22:elinks:INFO: Disabling clock on downlink 1
13:54:22:elinks:INFO: Disabling clock on downlink 2
13:54:22:elinks:INFO: Disabling clock on downlink 3
13:54:22:elinks:INFO: Disabling clock on downlink 4
13:54:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:54:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
13:54:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
13:54:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:54:22:elinks:INFO: Disabling clock on downlink 0
13:54:22:elinks:INFO: Disabling clock on downlink 1
13:54:22:elinks:INFO: Disabling clock on downlink 2
13:54:22:elinks:INFO: Disabling clock on downlink 3
13:54:22:elinks:INFO: Disabling clock on downlink 4
13:54:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:54:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:54:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:54:22:elinks:INFO: Disabling clock on downlink 0
13:54:22:elinks:INFO: Disabling clock on downlink 1
13:54:22:elinks:INFO: Disabling clock on downlink 2
13:54:22:elinks:INFO: Disabling clock on downlink 3
13:54:22:elinks:INFO: Disabling clock on downlink 4
13:54:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:54:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
13:54:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:54:22:elinks:INFO: Disabling clock on downlink 0
13:54:22:elinks:INFO: Disabling clock on downlink 1
13:54:22:elinks:INFO: Disabling clock on downlink 2
13:54:22:elinks:INFO: Disabling clock on downlink 3
13:54:23:elinks:INFO: Disabling clock on downlink 4
13:54:23:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:54:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
13:54:23:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:54:23:setup_element:INFO: Scanning clock phase
13:54:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:54:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:54:23:setup_element:INFO: Clock phase scan results for group 0, downlink 1
13:54:23:setup_element:INFO: Eye window for uplink 0 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:54:23:setup_element:INFO: Eye window for uplink 1 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:54:23:setup_element:INFO: Eye window for uplink 2 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:54:23:setup_element:INFO: Eye window for uplink 3 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:54:23:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:54:23:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:54:23:setup_element:INFO: Eye window for uplink 6 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:54:23:setup_element:INFO: Eye window for uplink 7 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:54:23:setup_element:INFO: Eye window for uplink 8 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:54:23:setup_element:INFO: Eye window for uplink 9 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:54:23:setup_element:INFO: Eye window for uplink 10: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:54:23:setup_element:INFO: Eye window for uplink 11: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:54:23:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
13:54:23:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
13:54:23:setup_element:INFO: Eye window for uplink 14: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
13:54:23:setup_element:INFO: Eye window for uplink 15: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
13:54:23:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 1
13:54:23:setup_element:INFO: Scanning data phases
13:54:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:54:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:54:28:setup_element:INFO: Data phase scan results for group 0, downlink 1
13:54:28:setup_element:INFO: Eye window for uplink 0 : ___________XXXXX________________________
Data delay found: 33
13:54:28:setup_element:INFO: Eye window for uplink 1 : ______XXXXX_____________________________
Data delay found: 28
13:54:28:setup_element:INFO: Eye window for uplink 2 : _______XXXXX____________________________
Data delay found: 29
13:54:28:setup_element:INFO: Eye window for uplink 3 : ____XXXXX_______________________________
Data delay found: 26
13:54:28:setup_element:INFO: Eye window for uplink 4 : _____XXXXX______________________________
Data delay found: 27
13:54:28:setup_element:INFO: Eye window for uplink 5 : _XXXXX__________________________________
Data delay found: 23
13:54:28:setup_element:INFO: Eye window for uplink 6 : XX___________________________________XXX
Data delay found: 19
13:54:28:setup_element:INFO: Eye window for uplink 7 : _________________________________XXXXX__
Data delay found: 15
13:54:28:setup_element:INFO: Eye window for uplink 8 : ___________________________XXXX_________
Data delay found: 8
13:54:28:setup_element:INFO: Eye window for uplink 9 : ________________________________XXXXX___
Data delay found: 14
13:54:28:setup_element:INFO: Eye window for uplink 10: ____________________________XXXXX_______
Data delay found: 10
13:54:28:setup_element:INFO: Eye window for uplink 11: ________________________________XXXX____
Data delay found: 13
13:54:28:setup_element:INFO: Eye window for uplink 12: __________________________XXXXX_________
Data delay found: 8
13:54:28:setup_element:INFO: Eye window for uplink 13: _____________________________XXXXXX_____
Data delay found: 11
13:54:28:setup_element:INFO: Eye window for uplink 14: ___________________________XXXX_________
Data delay found: 8
13:54:28:setup_element:INFO: Eye window for uplink 15: ____________________________XXXXXX______
Data delay found: 10
13:54:28:setup_element:INFO: Setting the data phase to 33 for uplink 0
13:54:28:setup_element:INFO: Setting the data phase to 28 for uplink 1
13:54:28:setup_element:INFO: Setting the data phase to 29 for uplink 2
13:54:28:setup_element:INFO: Setting the data phase to 26 for uplink 3
13:54:28:setup_element:INFO: Setting the data phase to 27 for uplink 4
13:54:28:setup_element:INFO: Setting the data phase to 23 for uplink 5
13:54:28:setup_element:INFO: Setting the data phase to 19 for uplink 6
13:54:28:setup_element:INFO: Setting the data phase to 15 for uplink 7
13:54:28:setup_element:INFO: Setting the data phase to 8 for uplink 8
13:54:28:setup_element:INFO: Setting the data phase to 14 for uplink 9
13:54:28:setup_element:INFO: Setting the data phase to 10 for uplink 10
13:54:28:setup_element:INFO: Setting the data phase to 13 for uplink 11
13:54:28:setup_element:INFO: Setting the data phase to 8 for uplink 12
13:54:28:setup_element:INFO: Setting the data phase to 11 for uplink 13
13:54:28:setup_element:INFO: Setting the data phase to 8 for uplink 14
13:54:28:setup_element:INFO: Setting the data phase to 10 for uplink 15
13:54:28:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 71
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: _______________________________________________________________________XXXXXXXX_
Uplink 3: _______________________________________________________________________XXXXXXXX_
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: ______________________________________________________________________XXXXXXXX__
Uplink 7: ______________________________________________________________________XXXXXXXX__
Uplink 8: _______________________________________________________________________XXXXXXXX_
Uplink 9: _______________________________________________________________________XXXXXXXX_
Uplink 10: ______________________________________________________________________XXXXXXXX__
Uplink 11: ______________________________________________________________________XXXXXXXX__
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 1:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 2:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 5:
Optimal Phase: 23
Window Length: 35
Eye Window: _XXXXX__________________________________
Uplink 6:
Optimal Phase: 19
Window Length: 35
Eye Window: XX___________________________________XXX
Uplink 7:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 8:
Optimal Phase: 8
Window Length: 36
Eye Window: ___________________________XXXX_________
Uplink 9:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 10:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 11:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 12:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 13:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 14:
Optimal Phase: 8
Window Length: 36
Eye Window: ___________________________XXXX_________
Uplink 15:
Optimal Phase: 10
Window Length: 34
Eye Window: ____________________________XXXXXX______
]
13:54:28:setup_element:INFO: Beginning SMX ASICs map scan
13:54:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:54:28:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:54:28:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
13:54:28:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
13:54:28:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
13:54:29:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
13:54:29:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
13:54:29:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
13:54:29:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
13:54:29:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
13:54:29:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
13:54:29:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
13:54:29:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
13:54:29:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
13:54:29:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
13:54:29:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
13:54:29:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
13:54:30:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
13:54:30:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
13:54:30:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
13:54:30:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
13:54:31:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 71
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: _______________________________________________________________________XXXXXXXX_
Uplink 3: _______________________________________________________________________XXXXXXXX_
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: ______________________________________________________________________XXXXXXXX__
Uplink 7: ______________________________________________________________________XXXXXXXX__
Uplink 8: _______________________________________________________________________XXXXXXXX_
Uplink 9: _______________________________________________________________________XXXXXXXX_
Uplink 10: ______________________________________________________________________XXXXXXXX__
Uplink 11: ______________________________________________________________________XXXXXXXX__
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 1:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 2:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 5:
Optimal Phase: 23
Window Length: 35
Eye Window: _XXXXX__________________________________
Uplink 6:
Optimal Phase: 19
Window Length: 35
Eye Window: XX___________________________________XXX
Uplink 7:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 8:
Optimal Phase: 8
Window Length: 36
Eye Window: ___________________________XXXX_________
Uplink 9:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 10:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 11:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 12:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 13:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 14:
Optimal Phase: 8
Window Length: 36
Eye Window: ___________________________XXXX_________
Uplink 15:
Optimal Phase: 10
Window Length: 34
Eye Window: ____________________________XXXXXX______
13:54:31:setup_element:INFO: Performing Elink synchronization
13:54:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:54:31:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:54:31:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
13:54:31:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
13:54:31:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
13:54:31:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
13:54:31:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
13:54:33:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:54:33:febtest:INFO: 01-00 | XA-000-08-002-000-004-016-15 | 28.2 | 1195.1
13:54:33:febtest:INFO: 08-01 | XA-000-08-002-000-004-066-13 | 25.1 | 1212.7
13:54:33:febtest:INFO: 03-02 | XA-000-08-002-000-004-018-15 | 40.9 | 1159.7
13:54:34:febtest:INFO: 10-03 | XA-000-08-002-000-004-070-13 | 34.6 | 1183.3
13:54:34:febtest:INFO: 05-04 | XA-000-08-002-000-004-022-15 | 31.4 | 1189.2
13:54:34:febtest:INFO: 12-05 | XA-000-08-002-000-004-009-08 | 50.4 | 1141.9
13:54:34:febtest:INFO: 07-06 | XA-000-08-002-000-004-017-15 | 31.4 | 1195.1
13:54:34:febtest:INFO: 14-07 | XA-000-08-002-000-004-013-08 | 18.7 | 1242.0
13:54:34:ST3_smx:INFO: Configuring SMX FAST
13:54:37:ST3_smx:INFO: chip: 1-0 31.389742 C 1183.292940 mV
13:54:37:ST3_smx:INFO: Electrons
13:54:37:ST3_smx:INFO: # loops 0
13:54:38:ST3_smx:INFO: # loops 1
13:54:40:ST3_smx:INFO: # loops 2
13:54:42:ST3_smx:INFO: Total # of broken channels: 0
13:54:42:ST3_smx:INFO: List of broken channels: []
13:54:42:ST3_smx:INFO: Total # of broken channels: 0
13:54:42:ST3_smx:INFO: List of broken channels: []
13:54:43:ST3_smx:INFO: Configuring SMX FAST
13:54:45:ST3_smx:INFO: chip: 8-1 31.389742 C 1195.082160 mV
13:54:45:ST3_smx:INFO: Electrons
13:54:45:ST3_smx:INFO: # loops 0
13:54:46:ST3_smx:INFO: # loops 1
13:54:48:ST3_smx:INFO: # loops 2
13:54:50:ST3_smx:INFO: Total # of broken channels: 0
13:54:50:ST3_smx:INFO: List of broken channels: []
13:54:50:ST3_smx:INFO: Total # of broken channels: 0
13:54:50:ST3_smx:INFO: List of broken channels: []
13:54:51:ST3_smx:INFO: Configuring SMX FAST
13:54:53:ST3_smx:INFO: chip: 3-2 44.073563 C 1153.732915 mV
13:54:53:ST3_smx:INFO: Electrons
13:54:53:ST3_smx:INFO: # loops 0
13:54:54:ST3_smx:INFO: # loops 1
13:54:56:ST3_smx:INFO: # loops 2
13:54:58:ST3_smx:INFO: Total # of broken channels: 0
13:54:58:ST3_smx:INFO: List of broken channels: []
13:54:58:ST3_smx:INFO: Total # of broken channels: 0
13:54:58:ST3_smx:INFO: List of broken channels: []
13:54:59:ST3_smx:INFO: Configuring SMX FAST
13:55:01:ST3_smx:INFO: chip: 10-3 44.073563 C 1153.732915 mV
13:55:01:ST3_smx:INFO: Electrons
13:55:01:ST3_smx:INFO: # loops 0
13:55:02:ST3_smx:INFO: # loops 1
13:55:04:ST3_smx:INFO: # loops 2
13:55:06:ST3_smx:INFO: Total # of broken channels: 0
13:55:06:ST3_smx:INFO: List of broken channels: []
13:55:06:ST3_smx:INFO: Total # of broken channels: 0
13:55:06:ST3_smx:INFO: List of broken channels: []
13:55:07:ST3_smx:INFO: Configuring SMX FAST
13:55:09:ST3_smx:INFO: chip: 5-4 40.898880 C 1159.654860 mV
13:55:09:ST3_smx:INFO: Electrons
13:55:09:ST3_smx:INFO: # loops 0
13:55:10:ST3_smx:INFO: # loops 1
13:55:12:ST3_smx:INFO: # loops 2
13:55:14:ST3_smx:INFO: Total # of broken channels: 0
13:55:14:ST3_smx:INFO: List of broken channels: []
13:55:14:ST3_smx:INFO: Total # of broken channels: 0
13:55:14:ST3_smx:INFO: List of broken channels: []
13:55:15:ST3_smx:INFO: Configuring SMX FAST
13:55:17:ST3_smx:INFO: chip: 12-5 47.250730 C 1153.732915 mV
13:55:17:ST3_smx:INFO: Electrons
13:55:17:ST3_smx:INFO: # loops 0
13:55:18:ST3_smx:INFO: # loops 1
13:55:20:ST3_smx:INFO: # loops 2
13:55:22:ST3_smx:INFO: Total # of broken channels: 0
13:55:22:ST3_smx:INFO: List of broken channels: []
13:55:22:ST3_smx:INFO: Total # of broken channels: 0
13:55:22:ST3_smx:INFO: List of broken channels: []
13:55:23:ST3_smx:INFO: Configuring SMX FAST
13:55:24:ST3_smx:INFO: chip: 7-6 34.556970 C 1189.190035 mV
13:55:24:ST3_smx:INFO: Electrons
13:55:25:ST3_smx:INFO: # loops 0
13:55:26:ST3_smx:INFO: # loops 1
13:55:28:ST3_smx:INFO: # loops 2
13:55:30:ST3_smx:INFO: Total # of broken channels: 0
13:55:30:ST3_smx:INFO: List of broken channels: []
13:55:30:ST3_smx:INFO: Total # of broken channels: 0
13:55:30:ST3_smx:INFO: List of broken channels: []
13:55:31:ST3_smx:INFO: Configuring SMX FAST
13:55:33:ST3_smx:INFO: chip: 14-7 25.062742 C 1230.330540 mV
13:55:33:ST3_smx:INFO: Electrons
13:55:33:ST3_smx:INFO: # loops 0
13:55:34:ST3_smx:INFO: # loops 1
13:55:36:ST3_smx:INFO: # loops 2
13:55:38:ST3_smx:INFO: Total # of broken channels: 0
13:55:38:ST3_smx:INFO: List of broken channels: []
13:55:38:ST3_smx:INFO: Total # of broken channels: 0
13:55:38:ST3_smx:INFO: List of broken channels: []
13:55:39:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:55:39:febtest:INFO: 01-00 | XA-000-08-002-000-004-016-15 | 34.6 | 1183.3
13:55:39:febtest:INFO: 08-01 | XA-000-08-002-000-004-066-13 | 31.4 | 1195.1
13:55:39:febtest:INFO: 03-02 | XA-000-08-002-000-004-018-15 | 47.3 | 1153.7
13:55:40:febtest:INFO: 10-03 | XA-000-08-002-000-004-070-13 | 47.3 | 1153.7
13:55:40:febtest:INFO: 05-04 | XA-000-08-002-000-004-022-15 | 44.1 | 1159.7
13:55:40:febtest:INFO: 12-05 | XA-000-08-002-000-004-009-08 | 47.3 | 1153.7
13:55:40:febtest:INFO: 07-06 | XA-000-08-002-000-004-017-15 | 34.6 | 1189.2
13:55:40:febtest:INFO: 14-07 | XA-000-08-002-000-004-013-08 | 21.9 | 1236.2
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_27-13_54_08
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1119
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.451', '1.4570', '1.850', '2.4650', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '1.9710', '1.850', '0.5879', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '1.9660', '1.850', '0.3147', '0.000', '0.0000', '0.000', '0.0000']
13:55:44:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
13:57:16:febtest:INFO: FEB type: 8.2
13:57:16:febtest:INFO: FEB SN: 1122
13:57:18:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:57:18:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
13:57:18:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:57:19:febtest:INFO: Testing FEB with SN 1122
13:57:21:smx_tester:INFO: Scanning setup
13:57:21:elinks:INFO: Disabling clock on downlink 0
13:57:21:elinks:INFO: Disabling clock on downlink 1
13:57:21:elinks:INFO: Disabling clock on downlink 2
13:57:21:elinks:INFO: Disabling clock on downlink 3
13:57:21:elinks:INFO: Disabling clock on downlink 4
13:57:21:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:57:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
13:57:21:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:57:21:elinks:INFO: Disabling clock on downlink 0
13:57:21:elinks:INFO: Disabling clock on downlink 1
13:57:21:elinks:INFO: Disabling clock on downlink 2
13:57:21:elinks:INFO: Disabling clock on downlink 3
13:57:21:elinks:INFO: Disabling clock on downlink 4
13:57:21:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:57:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
13:57:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
13:57:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:57:22:elinks:INFO: Disabling clock on downlink 0
13:57:22:elinks:INFO: Disabling clock on downlink 1
13:57:22:elinks:INFO: Disabling clock on downlink 2
13:57:22:elinks:INFO: Disabling clock on downlink 3
13:57:22:elinks:INFO: Disabling clock on downlink 4
13:57:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:57:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:57:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:57:22:elinks:INFO: Disabling clock on downlink 0
13:57:22:elinks:INFO: Disabling clock on downlink 1
13:57:22:elinks:INFO: Disabling clock on downlink 2
13:57:22:elinks:INFO: Disabling clock on downlink 3
13:57:22:elinks:INFO: Disabling clock on downlink 4
13:57:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:57:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
13:57:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:57:22:elinks:INFO: Disabling clock on downlink 0
13:57:22:elinks:INFO: Disabling clock on downlink 1
13:57:22:elinks:INFO: Disabling clock on downlink 2
13:57:22:elinks:INFO: Disabling clock on downlink 3
13:57:22:elinks:INFO: Disabling clock on downlink 4
13:57:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:57:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
13:57:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:57:22:setup_element:INFO: Scanning clock phase
13:57:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:57:22:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:57:22:setup_element:INFO: Clock phase scan results for group 0, downlink 1
13:57:22:setup_element:INFO: Eye window for uplink 0 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:57:22:setup_element:INFO: Eye window for uplink 1 : _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
13:57:22:setup_element:INFO: Eye window for uplink 2 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
13:57:22:setup_element:INFO: Eye window for uplink 3 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
13:57:22:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:57:23:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:57:23:setup_element:INFO: Eye window for uplink 6 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
13:57:23:setup_element:INFO: Eye window for uplink 7 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
13:57:23:setup_element:INFO: Eye window for uplink 8 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
13:57:23:setup_element:INFO: Eye window for uplink 9 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
13:57:23:setup_element:INFO: Eye window for uplink 10: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
13:57:23:setup_element:INFO: Eye window for uplink 11: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
13:57:23:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
13:57:23:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
13:57:23:setup_element:INFO: Eye window for uplink 14: ________________________________________________________________________XXXXXX__
Clock Delay: 34
13:57:23:setup_element:INFO: Eye window for uplink 15: ________________________________________________________________________XXXXXX__
Clock Delay: 34
13:57:23:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
13:57:23:setup_element:INFO: Scanning data phases
13:57:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:57:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:57:28:setup_element:INFO: Data phase scan results for group 0, downlink 1
13:57:28:setup_element:INFO: Eye window for uplink 0 : __________XXXXXX________________________
Data delay found: 32
13:57:28:setup_element:INFO: Eye window for uplink 1 : _______XXXX_____________________________
Data delay found: 28
13:57:28:setup_element:INFO: Eye window for uplink 2 : ________XXXX___________________XXXXXXXXX
Data delay found: 21
13:57:28:setup_element:INFO: Eye window for uplink 3 : _____XXXXX_____________________XXXXXXXXX
Data delay found: 20
13:57:28:setup_element:INFO: Eye window for uplink 4 : ____XXXXX_______________________________
Data delay found: 26
13:57:28:setup_element:INFO: Eye window for uplink 5 : XXXXX__________________________________X
Data delay found: 21
13:57:28:setup_element:INFO: Eye window for uplink 6 : XXX___________________________________XX
Data delay found: 20
13:57:28:setup_element:INFO: Eye window for uplink 7 : _________________________________XXXXX__
Data delay found: 15
13:57:28:setup_element:INFO: Eye window for uplink 8 : __________________________XXXX__________
Data delay found: 7
13:57:28:setup_element:INFO: Eye window for uplink 9 : ______________________________XXXXX_____
Data delay found: 12
13:57:28:setup_element:INFO: Eye window for uplink 10: _________________________XXXXX__________
Data delay found: 7
13:57:28:setup_element:INFO: Eye window for uplink 11: _____________________________XXXXX______
Data delay found: 11
13:57:28:setup_element:INFO: Eye window for uplink 12: _____________________________XXXX_______
Data delay found: 10
13:57:28:setup_element:INFO: Eye window for uplink 13: _______________________________XXXXX____
Data delay found: 13
13:57:28:setup_element:INFO: Eye window for uplink 14: _____________________________XXXXX______
Data delay found: 11
13:57:28:setup_element:INFO: Eye window for uplink 15: ______________________________XXXXXX____
Data delay found: 12
13:57:28:setup_element:INFO: Setting the data phase to 32 for uplink 0
13:57:28:setup_element:INFO: Setting the data phase to 28 for uplink 1
13:57:28:setup_element:INFO: Setting the data phase to 21 for uplink 2
13:57:28:setup_element:INFO: Setting the data phase to 20 for uplink 3
13:57:28:setup_element:INFO: Setting the data phase to 26 for uplink 4
13:57:28:setup_element:INFO: Setting the data phase to 21 for uplink 5
13:57:28:setup_element:INFO: Setting the data phase to 20 for uplink 6
13:57:28:setup_element:INFO: Setting the data phase to 15 for uplink 7
13:57:28:setup_element:INFO: Setting the data phase to 7 for uplink 8
13:57:28:setup_element:INFO: Setting the data phase to 12 for uplink 9
13:57:28:setup_element:INFO: Setting the data phase to 7 for uplink 10
13:57:28:setup_element:INFO: Setting the data phase to 11 for uplink 11
13:57:28:setup_element:INFO: Setting the data phase to 10 for uplink 12
13:57:28:setup_element:INFO: Setting the data phase to 13 for uplink 13
13:57:28:setup_element:INFO: Setting the data phase to 11 for uplink 14
13:57:28:setup_element:INFO: Setting the data phase to 12 for uplink 15
13:57:28:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXXX_
Uplink 1: _______________________________________________________________________XXXXXXXX_
Uplink 2: ______________________________________________________________________XXXXXXX___
Uplink 3: ______________________________________________________________________XXXXXXX___
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _______________________________________________________________________XXXXXX___
Uplink 7: _______________________________________________________________________XXXXXX___
Uplink 8: ______________________________________________________________________XXXXXXX___
Uplink 9: ______________________________________________________________________XXXXXXX___
Uplink 10: ____________________________________________________________________XXXXXXXXX___
Uplink 11: ____________________________________________________________________XXXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXXX_
Uplink 13: ______________________________________________________________________XXXXXXXXX_
Uplink 14: ________________________________________________________________________XXXXXX__
Uplink 15: ________________________________________________________________________XXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 1:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 2:
Optimal Phase: 21
Window Length: 19
Eye Window: ________XXXX___________________XXXXXXXXX
Uplink 3:
Optimal Phase: 20
Window Length: 21
Eye Window: _____XXXXX_____________________XXXXXXXXX
Uplink 4:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 5:
Optimal Phase: 21
Window Length: 34
Eye Window: XXXXX__________________________________X
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 8:
Optimal Phase: 7
Window Length: 36
Eye Window: __________________________XXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 13:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 14:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 15:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
]
13:57:28:setup_element:INFO: Beginning SMX ASICs map scan
13:57:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:57:28:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:57:28:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
13:57:28:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
13:57:28:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
13:57:28:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
13:57:28:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
13:57:29:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
13:57:29:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
13:57:29:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
13:57:29:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
13:57:29:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
13:57:29:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
13:57:29:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
13:57:29:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
13:57:29:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
13:57:29:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
13:57:29:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
13:57:30:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
13:57:30:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
13:57:30:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
13:57:31:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXXX_
Uplink 1: _______________________________________________________________________XXXXXXXX_
Uplink 2: ______________________________________________________________________XXXXXXX___
Uplink 3: ______________________________________________________________________XXXXXXX___
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _______________________________________________________________________XXXXXX___
Uplink 7: _______________________________________________________________________XXXXXX___
Uplink 8: ______________________________________________________________________XXXXXXX___
Uplink 9: ______________________________________________________________________XXXXXXX___
Uplink 10: ____________________________________________________________________XXXXXXXXX___
Uplink 11: ____________________________________________________________________XXXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXXX_
Uplink 13: ______________________________________________________________________XXXXXXXXX_
Uplink 14: ________________________________________________________________________XXXXXX__
Uplink 15: ________________________________________________________________________XXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 1:
Optimal Phase: 28
Window Length: 36
Eye Window: _______XXXX_____________________________
Uplink 2:
Optimal Phase: 21
Window Length: 19
Eye Window: ________XXXX___________________XXXXXXXXX
Uplink 3:
Optimal Phase: 20
Window Length: 21
Eye Window: _____XXXXX_____________________XXXXXXXXX
Uplink 4:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 5:
Optimal Phase: 21
Window Length: 34
Eye Window: XXXXX__________________________________X
Uplink 6:
Optimal Phase: 20
Window Length: 35
Eye Window: XXX___________________________________XX
Uplink 7:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 8:
Optimal Phase: 7
Window Length: 36
Eye Window: __________________________XXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 11:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 12:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 13:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 14:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 15:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
13:57:31:setup_element:INFO: Performing Elink synchronization
13:57:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:57:31:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:57:31:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
13:57:31:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
13:57:31:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
13:57:31:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
13:57:31:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
13:57:32:smx_tester:INFO: Scanning setup
13:57:32:elinks:INFO: Disabling clock on downlink 0
13:57:32:elinks:INFO: Disabling clock on downlink 1
13:57:32:elinks:INFO: Disabling clock on downlink 2
13:57:32:elinks:INFO: Disabling clock on downlink 3
13:57:32:elinks:INFO: Disabling clock on downlink 4
13:57:32:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:57:32:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
13:57:32:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:57:32:elinks:INFO: Disabling clock on downlink 0
13:57:32:elinks:INFO: Disabling clock on downlink 1
13:57:32:elinks:INFO: Disabling clock on downlink 2
13:57:32:elinks:INFO: Disabling clock on downlink 3
13:57:32:elinks:INFO: Disabling clock on downlink 4
13:57:32:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:57:32:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
13:57:32:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
13:57:32:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:57:32:elinks:INFO: Disabling clock on downlink 0
13:57:32:elinks:INFO: Disabling clock on downlink 1
13:57:32:elinks:INFO: Disabling clock on downlink 2
13:57:32:elinks:INFO: Disabling clock on downlink 3
13:57:33:elinks:INFO: Disabling clock on downlink 4
13:57:33:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:57:33:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
13:57:33:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:57:33:elinks:INFO: Disabling clock on downlink 0
13:57:33:elinks:INFO: Disabling clock on downlink 1
13:57:33:elinks:INFO: Disabling clock on downlink 2
13:57:33:elinks:INFO: Disabling clock on downlink 3
13:57:33:elinks:INFO: Disabling clock on downlink 4
13:57:33:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:57:33:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
13:57:33:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:57:33:elinks:INFO: Disabling clock on downlink 0
13:57:33:elinks:INFO: Disabling clock on downlink 1
13:57:33:elinks:INFO: Disabling clock on downlink 2
13:57:33:elinks:INFO: Disabling clock on downlink 3
13:57:33:elinks:INFO: Disabling clock on downlink 4
13:57:33:setup_element:INFO: Checking SOS, encoding_mode: SOS
13:57:33:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
13:57:33:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
13:57:33:setup_element:INFO: Scanning clock phase
13:57:33:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:57:33:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:57:33:setup_element:INFO: Clock phase scan results for group 0, downlink 1
13:57:33:setup_element:INFO: Eye window for uplink 0 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:57:33:setup_element:INFO: Eye window for uplink 1 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:57:33:setup_element:INFO: Eye window for uplink 2 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:57:33:setup_element:INFO: Eye window for uplink 3 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:57:33:setup_element:INFO: Eye window for uplink 4 : ________________________________________________________________________________
Clock Delay: 40
13:57:33:setup_element:INFO: Eye window for uplink 5 : ________________________________________________________________________________
Clock Delay: 40
13:57:33:setup_element:INFO: Eye window for uplink 6 : _______________________________________________________________________XXXXX____
Clock Delay: 33
13:57:33:setup_element:INFO: Eye window for uplink 7 : _______________________________________________________________________XXXXX____
Clock Delay: 33
13:57:33:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:57:33:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:57:33:setup_element:INFO: Eye window for uplink 10: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
13:57:33:setup_element:INFO: Eye window for uplink 11: ____________________________________________________________________XXXXXXXXX___
Clock Delay: 32
13:57:33:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
13:57:33:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
13:57:33:setup_element:INFO: Eye window for uplink 14: ________________________________________________________________________XXXXXX__
Clock Delay: 34
13:57:33:setup_element:INFO: Eye window for uplink 15: ________________________________________________________________________XXXXXX__
Clock Delay: 34
13:57:33:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
13:57:33:setup_element:INFO: Scanning data phases
13:57:33:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:57:33:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:57:38:setup_element:INFO: Data phase scan results for group 0, downlink 1
13:57:38:setup_element:INFO: Eye window for uplink 0 : ___________XXXXX________________________
Data delay found: 33
13:57:38:setup_element:INFO: Eye window for uplink 1 : ______XXXXX_____________________________
Data delay found: 28
13:57:38:setup_element:INFO: Eye window for uplink 2 : ________XXXXX__XXXXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 3
13:57:38:setup_element:INFO: Eye window for uplink 3 : _____XXXXX_____XXXXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 2
13:57:38:setup_element:INFO: Eye window for uplink 4 : ____XXXXX_______________________________
Data delay found: 26
13:57:38:setup_element:INFO: Eye window for uplink 5 : XXXXX_________________________________XX
Data delay found: 21
13:57:38:setup_element:INFO: Eye window for uplink 6 : XX____________________________________XX
Data delay found: 19
13:57:38:setup_element:INFO: Eye window for uplink 7 : _________________________________XXXXX__
Data delay found: 15
13:57:38:setup_element:INFO: Eye window for uplink 8 : _________________________XXXXX__________
Data delay found: 7
13:57:38:setup_element:INFO: Eye window for uplink 9 : ______________________________XXXXX_____
Data delay found: 12
13:57:38:setup_element:INFO: Eye window for uplink 10: ________________________XXXXXX__________
Data delay found: 6
13:57:38:setup_element:INFO: Eye window for uplink 11: _____________________________XXXX_______
Data delay found: 10
13:57:38:setup_element:INFO: Eye window for uplink 12: ____________________________XXXXX_______
Data delay found: 10
13:57:38:setup_element:INFO: Eye window for uplink 13: _______________________________XXXXX____
Data delay found: 13
13:57:38:setup_element:INFO: Eye window for uplink 14: _____________________________XXXXX______
Data delay found: 11
13:57:38:setup_element:INFO: Eye window for uplink 15: ______________________________XXXXXX____
Data delay found: 12
13:57:38:setup_element:INFO: Setting the data phase to 33 for uplink 0
13:57:38:setup_element:INFO: Setting the data phase to 28 for uplink 1
13:57:38:setup_element:INFO: Setting the data phase to 3 for uplink 2
13:57:38:setup_element:INFO: Setting the data phase to 2 for uplink 3
13:57:38:setup_element:INFO: Setting the data phase to 26 for uplink 4
13:57:38:setup_element:INFO: Setting the data phase to 21 for uplink 5
13:57:38:setup_element:INFO: Setting the data phase to 19 for uplink 6
13:57:38:setup_element:INFO: Setting the data phase to 15 for uplink 7
13:57:38:setup_element:INFO: Setting the data phase to 7 for uplink 8
13:57:38:setup_element:INFO: Setting the data phase to 12 for uplink 9
13:57:38:setup_element:INFO: Setting the data phase to 6 for uplink 10
13:57:38:setup_element:INFO: Setting the data phase to 10 for uplink 11
13:57:38:setup_element:INFO: Setting the data phase to 10 for uplink 12
13:57:38:setup_element:INFO: Setting the data phase to 13 for uplink 13
13:57:38:setup_element:INFO: Setting the data phase to 11 for uplink 14
13:57:38:setup_element:INFO: Setting the data phase to 12 for uplink 15
13:57:38:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: ______________________________________________________________________XXXXXXXX__
Uplink 3: ______________________________________________________________________XXXXXXXX__
Uplink 4: ________________________________________________________________________________
Uplink 5: ________________________________________________________________________________
Uplink 6: _______________________________________________________________________XXXXX____
Uplink 7: _______________________________________________________________________XXXXX____
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ____________________________________________________________________XXXXXXXXX___
Uplink 11: ____________________________________________________________________XXXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXXX_
Uplink 13: ______________________________________________________________________XXXXXXXXX_
Uplink 14: ________________________________________________________________________XXXXXX__
Uplink 15: ________________________________________________________________________XXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 1:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 2:
Optimal Phase: 3
Window Length: 8
Eye Window: ________XXXXX__XXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 3:
Optimal Phase: 2
Window Length: 5
Eye Window: _____XXXXX_____XXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 4:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 5:
Optimal Phase: 21
Window Length: 33
Eye Window: XXXXX_________________________________XX
Uplink 6:
Optimal Phase: 19
Window Length: 36
Eye Window: XX____________________________________XX
Uplink 7:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 8:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 6
Window Length: 34
Eye Window: ________________________XXXXXX__________
Uplink 11:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 12:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 13:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 14:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 15:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
]
13:57:38:setup_element:INFO: Beginning SMX ASICs map scan
13:57:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:57:39:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:57:39:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
13:57:39:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
13:57:39:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
13:57:39:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
13:57:39:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
13:57:39:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
13:57:39:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
13:57:39:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
13:57:39:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
13:57:39:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
13:57:39:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
13:57:39:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
13:57:39:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
13:57:39:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
13:57:39:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
13:57:40:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
13:57:40:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
13:57:40:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
13:57:40:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
13:57:41:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 69
Eye Windows:
Uplink 0: _______________________________________________________________________XXXXXXX__
Uplink 1: _______________________________________________________________________XXXXXXX__
Uplink 2: ______________________________________________________________________XXXXXXXX__
Uplink 3: ______________________________________________________________________XXXXXXXX__
Uplink 4: ________________________________________________________________________________
Uplink 5: ________________________________________________________________________________
Uplink 6: _______________________________________________________________________XXXXX____
Uplink 7: _______________________________________________________________________XXXXX____
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ____________________________________________________________________XXXXXXXXX___
Uplink 11: ____________________________________________________________________XXXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXXX_
Uplink 13: ______________________________________________________________________XXXXXXXXX_
Uplink 14: ________________________________________________________________________XXXXXX__
Uplink 15: ________________________________________________________________________XXXXXX__
Data phase characteristics:
Uplink 0:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 1:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 2:
Optimal Phase: 3
Window Length: 8
Eye Window: ________XXXXX__XXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 3:
Optimal Phase: 2
Window Length: 5
Eye Window: _____XXXXX_____XXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 4:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 5:
Optimal Phase: 21
Window Length: 33
Eye Window: XXXXX_________________________________XX
Uplink 6:
Optimal Phase: 19
Window Length: 36
Eye Window: XX____________________________________XX
Uplink 7:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 8:
Optimal Phase: 7
Window Length: 35
Eye Window: _________________________XXXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 6
Window Length: 34
Eye Window: ________________________XXXXXX__________
Uplink 11:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 12:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 13:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 14:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 15:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
13:57:41:setup_element:INFO: Performing Elink synchronization
13:57:41:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
13:57:41:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
13:57:41:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
13:57:41:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
13:57:41:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
13:57:41:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
13:57:41:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
13:57:43:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:57:43:febtest:INFO: 01-00 | XA-000-08-002-000-004-082-10 | 28.2 | 1201.0
13:57:43:febtest:INFO: 08-01 | XA-000-08-002-000-004-072-13 | 34.6 | 1189.2
13:57:43:febtest:INFO: 03-02 | XA-000-08-002-000-004-077-13 | 21.9 | 1236.2
13:57:43:febtest:INFO: 10-03 | XA-000-08-002-000-004-076-13 | 21.9 | 1230.3
13:57:44:febtest:INFO: 05-04 | XA-000-08-002-000-004-073-13 | 15.6 | 1253.7
13:57:44:febtest:INFO: 12-05 | XA-000-08-002-000-004-081-10 | 31.4 | 1201.0
13:57:44:febtest:INFO: 07-06 | XA-000-08-002-000-004-109-03 | 31.4 | 1195.1
13:57:44:febtest:INFO: 14-07 | XA-000-08-002-000-004-071-13 | 28.2 | 1206.9
13:57:44:ST3_smx:INFO: Configuring SMX FAST
13:57:46:ST3_smx:INFO: chip: 1-0 31.389742 C 1189.190035 mV
13:57:46:ST3_smx:INFO: Electrons
13:57:46:ST3_smx:INFO: # loops 0
13:57:48:ST3_smx:INFO: # loops 1
13:57:50:ST3_smx:INFO: # loops 2
13:57:51:ST3_smx:INFO: Total # of broken channels: 0
13:57:51:ST3_smx:INFO: List of broken channels: []
13:57:51:ST3_smx:INFO: Total # of broken channels: 0
13:57:51:ST3_smx:INFO: List of broken channels: []
13:57:52:ST3_smx:INFO: Configuring SMX FAST
13:57:54:ST3_smx:INFO: chip: 8-1 31.389742 C 1206.851500 mV
13:57:54:ST3_smx:INFO: Electrons
13:57:54:ST3_smx:INFO: # loops 0
13:57:56:ST3_smx:INFO: # loops 1
13:57:58:ST3_smx:INFO: # loops 2
13:57:59:ST3_smx:INFO: Total # of broken channels: 0
13:57:59:ST3_smx:INFO: List of broken channels: []
13:57:59:ST3_smx:INFO: Total # of broken channels: 0
13:57:59:ST3_smx:INFO: List of broken channels: []
13:58:00:ST3_smx:INFO: Configuring SMX FAST
13:58:02:ST3_smx:INFO: chip: 3-2 31.389742 C 1200.969315 mV
13:58:02:ST3_smx:INFO: Electrons
13:58:02:ST3_smx:INFO: # loops 0
13:58:04:ST3_smx:INFO: # loops 1
13:58:06:ST3_smx:INFO: # loops 2
13:58:07:ST3_smx:INFO: Total # of broken channels: 0
13:58:07:ST3_smx:INFO: List of broken channels: []
13:58:07:ST3_smx:INFO: Total # of broken channels: 0
13:58:07:ST3_smx:INFO: List of broken channels: []
13:58:08:ST3_smx:INFO: Configuring SMX FAST
13:58:10:ST3_smx:INFO: chip: 10-3 25.062742 C 1224.468235 mV
13:58:10:ST3_smx:INFO: Electrons
13:58:10:ST3_smx:INFO: # loops 0
13:58:12:ST3_smx:INFO: # loops 1
13:58:13:ST3_smx:INFO: # loops 2
13:58:15:ST3_smx:INFO: Total # of broken channels: 0
13:58:15:ST3_smx:INFO: List of broken channels: []
13:58:15:ST3_smx:INFO: Total # of broken channels: 0
13:58:15:ST3_smx:INFO: List of broken channels: []
13:58:16:ST3_smx:INFO: Configuring SMX FAST
13:58:18:ST3_smx:INFO: chip: 5-4 25.062742 C 1230.330540 mV
13:58:18:ST3_smx:INFO: Electrons
13:58:18:ST3_smx:INFO: # loops 0
13:58:20:ST3_smx:INFO: # loops 1
13:58:21:ST3_smx:INFO: # loops 2
13:58:23:ST3_smx:INFO: Total # of broken channels: 0
13:58:23:ST3_smx:INFO: List of broken channels: []
13:58:23:ST3_smx:INFO: Total # of broken channels: 0
13:58:23:ST3_smx:INFO: List of broken channels: []
13:58:24:ST3_smx:INFO: Configuring SMX FAST
13:58:26:ST3_smx:INFO: chip: 12-5 25.062742 C 1218.600960 mV
13:58:26:ST3_smx:INFO: Electrons
13:58:26:ST3_smx:INFO: # loops 0
13:58:28:ST3_smx:INFO: # loops 1
13:58:29:ST3_smx:INFO: # loops 2
13:58:31:ST3_smx:INFO: Total # of broken channels: 0
13:58:31:ST3_smx:INFO: List of broken channels: []
13:58:31:ST3_smx:INFO: Total # of broken channels: 0
13:58:31:ST3_smx:INFO: List of broken channels: []
13:58:32:ST3_smx:INFO: Configuring SMX FAST
13:58:34:ST3_smx:INFO: chip: 7-6 31.389742 C 1200.969315 mV
13:58:34:ST3_smx:INFO: Electrons
13:58:34:ST3_smx:INFO: # loops 0
13:58:36:ST3_smx:INFO: # loops 1
13:58:37:ST3_smx:INFO: # loops 2
13:58:39:ST3_smx:INFO: Total # of broken channels: 0
13:58:39:ST3_smx:INFO: List of broken channels: []
13:58:39:ST3_smx:INFO: Total # of broken channels: 0
13:58:39:ST3_smx:INFO: List of broken channels: []
13:58:40:ST3_smx:INFO: Configuring SMX FAST
13:58:42:ST3_smx:INFO: chip: 14-7 34.556970 C 1195.082160 mV
13:58:42:ST3_smx:INFO: Electrons
13:58:42:ST3_smx:INFO: # loops 0
13:58:44:ST3_smx:INFO: # loops 1
13:58:45:ST3_smx:INFO: # loops 2
13:58:47:ST3_smx:INFO: Total # of broken channels: 0
13:58:47:ST3_smx:INFO: List of broken channels: []
13:58:47:ST3_smx:INFO: Total # of broken channels: 0
13:58:47:ST3_smx:INFO: List of broken channels: []
13:58:48:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:58:48:febtest:INFO: 01-00 | XA-000-08-002-000-004-082-10 | 34.6 | 1189.2
13:58:48:febtest:INFO: 08-01 | XA-000-08-002-000-004-072-13 | 31.4 | 1206.9
13:58:49:febtest:INFO: 03-02 | XA-000-08-002-000-004-077-13 | 31.4 | 1201.0
13:58:49:febtest:INFO: 10-03 | XA-000-08-002-000-004-076-13 | 28.2 | 1224.5
13:58:49:febtest:INFO: 05-04 | XA-000-08-002-000-004-073-13 | 25.1 | 1224.5
13:58:49:febtest:INFO: 12-05 | XA-000-08-002-000-004-081-10 | 25.1 | 1218.6
13:58:50:febtest:INFO: 07-06 | XA-000-08-002-000-004-109-03 | 31.4 | 1201.0
13:58:50:febtest:INFO: 14-07 | XA-000-08-002-000-004-071-13 | 34.6 | 1195.1
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_27-13_57_18
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1122
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.451', '1.8980', '1.850', '2.2270', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '1.9730', '1.850', '0.4646', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '1.9680', '1.850', '0.3182', '0.000', '0.0000', '0.000', '0.0000']
13:58:55:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:00:50:febtest:INFO: FEB type: 8.2
14:00:50:febtest:INFO: FEB SN: 2121
14:00:53:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:00:53:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:00:53:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:00:53:febtest:INFO: Testing FEB with SN 2121
14:00:56:smx_tester:INFO: Scanning setup
14:00:56:elinks:INFO: Disabling clock on downlink 0
14:00:56:elinks:INFO: Disabling clock on downlink 1
14:00:56:elinks:INFO: Disabling clock on downlink 2
14:00:56:elinks:INFO: Disabling clock on downlink 3
14:00:56:elinks:INFO: Disabling clock on downlink 4
14:00:56:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:00:56:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:00:56:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:00:56:elinks:INFO: Disabling clock on downlink 0
14:00:56:elinks:INFO: Disabling clock on downlink 1
14:00:56:elinks:INFO: Disabling clock on downlink 2
14:00:56:elinks:INFO: Disabling clock on downlink 3
14:00:56:elinks:INFO: Disabling clock on downlink 4
14:00:56:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:00:56:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:00:56:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:00:56:elinks:INFO: Disabling clock on downlink 0
14:00:56:elinks:INFO: Disabling clock on downlink 1
14:00:56:elinks:INFO: Disabling clock on downlink 2
14:00:56:elinks:INFO: Disabling clock on downlink 3
14:00:56:elinks:INFO: Disabling clock on downlink 4
14:00:56:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:00:56:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:00:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:00:56:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:00:56:elinks:INFO: Disabling clock on downlink 0
14:00:56:elinks:INFO: Disabling clock on downlink 1
14:00:56:elinks:INFO: Disabling clock on downlink 2
14:00:56:elinks:INFO: Disabling clock on downlink 3
14:00:56:elinks:INFO: Disabling clock on downlink 4
14:00:56:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:00:56:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:00:56:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:00:56:elinks:INFO: Disabling clock on downlink 0
14:00:56:elinks:INFO: Disabling clock on downlink 1
14:00:56:elinks:INFO: Disabling clock on downlink 2
14:00:56:elinks:INFO: Disabling clock on downlink 3
14:00:57:elinks:INFO: Disabling clock on downlink 4
14:00:57:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:00:57:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:00:57:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:00:57:setup_element:INFO: Scanning clock phase
14:00:57:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:00:57:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:00:57:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:00:57:setup_element:INFO: Eye window for uplink 16: _________________________________________________________________________XXXXXXX
Clock Delay: 36
14:00:57:setup_element:INFO: Eye window for uplink 17: _________________________________________________________________________XXXXXXX
Clock Delay: 36
14:00:57:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:00:57:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:00:57:setup_element:INFO: Eye window for uplink 20: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:00:57:setup_element:INFO: Eye window for uplink 21: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:00:57:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:00:57:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:00:57:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:00:57:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:00:57:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:00:57:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:00:57:setup_element:INFO: Eye window for uplink 30: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:00:57:setup_element:INFO: Eye window for uplink 31: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:00:57:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:00:57:setup_element:INFO: Scanning data phases
14:00:57:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:00:57:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:02:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:01:02:setup_element:INFO: Eye window for uplink 16: XXXX___________________________________X
Data delay found: 21
14:01:02:setup_element:INFO: Eye window for uplink 17: ___________________________________XXXX_
Data delay found: 16
14:01:02:setup_element:INFO: Eye window for uplink 18: XX_________________________________XXXXX
Data delay found: 18
14:01:02:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXX__
Data delay found: 15
14:01:03:setup_element:INFO: Eye window for uplink 20: X___________________________________XXXX
Data delay found: 18
14:01:03:setup_element:INFO: Eye window for uplink 21: __________________________________XXXXXX
Data delay found: 16
14:01:03:setup_element:INFO: Eye window for uplink 24: ______XXXX______________________________
Data delay found: 27
14:01:03:setup_element:INFO: Eye window for uplink 25: _________XXXX___________________________
Data delay found: 30
14:01:03:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
14:01:03:setup_element:INFO: Eye window for uplink 27: ___________XXXXX________________________
Data delay found: 33
14:01:03:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
14:01:03:setup_element:INFO: Eye window for uplink 29: _____________XXXXX______________________
Data delay found: 35
14:01:03:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
14:01:03:setup_element:INFO: Eye window for uplink 31: _____________XXXXX______________________
Data delay found: 35
14:01:03:setup_element:INFO: Setting the data phase to 21 for uplink 16
14:01:03:setup_element:INFO: Setting the data phase to 16 for uplink 17
14:01:03:setup_element:INFO: Setting the data phase to 18 for uplink 18
14:01:03:setup_element:INFO: Setting the data phase to 15 for uplink 19
14:01:03:setup_element:INFO: Setting the data phase to 18 for uplink 20
14:01:03:setup_element:INFO: Setting the data phase to 16 for uplink 21
14:01:03:setup_element:INFO: Setting the data phase to 27 for uplink 24
14:01:03:setup_element:INFO: Setting the data phase to 30 for uplink 25
14:01:03:setup_element:INFO: Setting the data phase to 30 for uplink 26
14:01:03:setup_element:INFO: Setting the data phase to 33 for uplink 27
14:01:03:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:01:03:setup_element:INFO: Setting the data phase to 35 for uplink 29
14:01:03:setup_element:INFO: Setting the data phase to 36 for uplink 30
14:01:03:setup_element:INFO: Setting the data phase to 35 for uplink 31
14:01:03:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _________________________________________________________________________XXXXXXX
Uplink 17: _________________________________________________________________________XXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: ________________________________________________________________________XXXXXXX_
Uplink 31: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 34
Eye Window: __________________________________XXXXXX
Uplink 24:
Optimal Phase: 27
Window Length: 36
Eye Window: ______XXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 36
Eye Window: _________XXXX___________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
]
14:01:03:setup_element:INFO: Beginning SMX ASICs map scan
14:01:03:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:03:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:03:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:01:03:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:01:03:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
14:01:03:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:01:03:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:01:03:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
14:01:03:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
14:01:03:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:01:03:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:01:03:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:01:04:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:01:04:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:01:04:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:01:04:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:01:04:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:01:04:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:01:04:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:01:05:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _________________________________________________________________________XXXXXXX
Uplink 17: _________________________________________________________________________XXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: ________________________________________________________________________XXXXXXX_
Uplink 31: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 34
Eye Window: __________________________________XXXXXX
Uplink 24:
Optimal Phase: 27
Window Length: 36
Eye Window: ______XXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 36
Eye Window: _________XXXX___________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
14:01:05:setup_element:INFO: Performing Elink synchronization
14:01:05:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:05:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:05:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:01:06:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:01:06:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:01:06:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
14:01:06:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
14:01:06:smx_tester:INFO: Scanning setup
14:01:06:elinks:INFO: Disabling clock on downlink 0
14:01:06:elinks:INFO: Disabling clock on downlink 1
14:01:06:elinks:INFO: Disabling clock on downlink 2
14:01:06:elinks:INFO: Disabling clock on downlink 3
14:01:06:elinks:INFO: Disabling clock on downlink 4
14:01:06:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:06:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:01:06:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:06:elinks:INFO: Disabling clock on downlink 0
14:01:06:elinks:INFO: Disabling clock on downlink 1
14:01:06:elinks:INFO: Disabling clock on downlink 2
14:01:06:elinks:INFO: Disabling clock on downlink 3
14:01:06:elinks:INFO: Disabling clock on downlink 4
14:01:06:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:06:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:01:07:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:07:elinks:INFO: Disabling clock on downlink 0
14:01:07:elinks:INFO: Disabling clock on downlink 1
14:01:07:elinks:INFO: Disabling clock on downlink 2
14:01:07:elinks:INFO: Disabling clock on downlink 3
14:01:07:elinks:INFO: Disabling clock on downlink 4
14:01:07:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:01:07:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:01:07:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:07:elinks:INFO: Disabling clock on downlink 0
14:01:07:elinks:INFO: Disabling clock on downlink 1
14:01:07:elinks:INFO: Disabling clock on downlink 2
14:01:07:elinks:INFO: Disabling clock on downlink 3
14:01:07:elinks:INFO: Disabling clock on downlink 4
14:01:07:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:01:07:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:07:elinks:INFO: Disabling clock on downlink 0
14:01:07:elinks:INFO: Disabling clock on downlink 1
14:01:07:elinks:INFO: Disabling clock on downlink 2
14:01:07:elinks:INFO: Disabling clock on downlink 3
14:01:07:elinks:INFO: Disabling clock on downlink 4
14:01:07:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:01:07:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:07:setup_element:INFO: Scanning clock phase
14:01:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:07:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:07:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:01:07:setup_element:INFO: Eye window for uplink 16: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:01:07:setup_element:INFO: Eye window for uplink 17: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:01:07:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:07:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:07:setup_element:INFO: Eye window for uplink 20: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:01:07:setup_element:INFO: Eye window for uplink 21: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:01:07:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:07:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:07:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:01:07:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:01:07:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:07:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:07:setup_element:INFO: Eye window for uplink 30: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:01:07:setup_element:INFO: Eye window for uplink 31: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:01:07:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:01:07:setup_element:INFO: Scanning data phases
14:01:07:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:08:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:13:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:01:13:setup_element:INFO: Eye window for uplink 16: XXXX___________________________________X
Data delay found: 21
14:01:13:setup_element:INFO: Eye window for uplink 17: ___________________________________XXXXX
Data delay found: 17
14:01:13:setup_element:INFO: Eye window for uplink 18: XX_________________________________XXXXX
Data delay found: 18
14:01:13:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXX__
Data delay found: 15
14:01:13:setup_element:INFO: Eye window for uplink 20: ____________________________________XXXX
Data delay found: 17
14:01:13:setup_element:INFO: Eye window for uplink 21: __________________________________XXXXX_
Data delay found: 16
14:01:13:setup_element:INFO: Eye window for uplink 24: ______XXXXX_____________________________
Data delay found: 28
14:01:13:setup_element:INFO: Eye window for uplink 25: _________XXXX___________________________
Data delay found: 30
14:01:13:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
14:01:13:setup_element:INFO: Eye window for uplink 27: ____________XXXXX_______________________
Data delay found: 34
14:01:13:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
14:01:13:setup_element:INFO: Eye window for uplink 29: _____________XXXXX______________________
Data delay found: 35
14:01:13:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
14:01:13:setup_element:INFO: Eye window for uplink 31: ____________XXXXX_______________________
Data delay found: 34
14:01:13:setup_element:INFO: Setting the data phase to 21 for uplink 16
14:01:13:setup_element:INFO: Setting the data phase to 17 for uplink 17
14:01:13:setup_element:INFO: Setting the data phase to 18 for uplink 18
14:01:13:setup_element:INFO: Setting the data phase to 15 for uplink 19
14:01:13:setup_element:INFO: Setting the data phase to 17 for uplink 20
14:01:13:setup_element:INFO: Setting the data phase to 16 for uplink 21
14:01:13:setup_element:INFO: Setting the data phase to 28 for uplink 24
14:01:13:setup_element:INFO: Setting the data phase to 30 for uplink 25
14:01:13:setup_element:INFO: Setting the data phase to 30 for uplink 26
14:01:13:setup_element:INFO: Setting the data phase to 34 for uplink 27
14:01:13:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:01:13:setup_element:INFO: Setting the data phase to 35 for uplink 29
14:01:13:setup_element:INFO: Setting the data phase to 36 for uplink 30
14:01:13:setup_element:INFO: Setting the data phase to 34 for uplink 31
14:01:13:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXX_
Uplink 17: ________________________________________________________________________XXXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: ________________________________________________________________________XXXXXXXX
Uplink 31: ________________________________________________________________________XXXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 17
Window Length: 36
Eye Window: ____________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 30
Window Length: 36
Eye Window: _________XXXX___________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
]
14:01:13:setup_element:INFO: Beginning SMX ASICs map scan
14:01:13:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:13:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:13:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:01:13:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:01:13:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
14:01:13:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:01:13:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:01:13:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
14:01:14:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
14:01:14:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:01:14:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:01:14:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:01:14:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:01:14:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:01:14:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:01:14:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:01:14:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:01:14:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:01:14:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:01:16:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXX_
Uplink 17: ________________________________________________________________________XXXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Uplink 30: ________________________________________________________________________XXXXXXXX
Uplink 31: ________________________________________________________________________XXXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 17
Window Length: 36
Eye Window: ____________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 30
Window Length: 36
Eye Window: _________XXXX___________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
14:01:16:setup_element:INFO: Performing Elink synchronization
14:01:16:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:16:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:16:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:01:16:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:01:16:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:01:16:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
14:01:16:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:01:17:febtest:ERROR: HW addres 1 != 0
14:01:42:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:01:42:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:01:42:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:01:43:febtest:INFO: Testing FEB with SN 2121
14:01:46:smx_tester:INFO: Scanning setup
14:01:46:elinks:INFO: Disabling clock on downlink 0
14:01:46:elinks:INFO: Disabling clock on downlink 1
14:01:46:elinks:INFO: Disabling clock on downlink 2
14:01:46:elinks:INFO: Disabling clock on downlink 3
14:01:46:elinks:INFO: Disabling clock on downlink 4
14:01:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:01:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:46:elinks:INFO: Disabling clock on downlink 0
14:01:46:elinks:INFO: Disabling clock on downlink 1
14:01:46:elinks:INFO: Disabling clock on downlink 2
14:01:46:elinks:INFO: Disabling clock on downlink 3
14:01:46:elinks:INFO: Disabling clock on downlink 4
14:01:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:01:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:46:elinks:INFO: Disabling clock on downlink 0
14:01:46:elinks:INFO: Disabling clock on downlink 1
14:01:46:elinks:INFO: Disabling clock on downlink 2
14:01:46:elinks:INFO: Disabling clock on downlink 3
14:01:46:elinks:INFO: Disabling clock on downlink 4
14:01:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:01:46:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:01:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:46:elinks:INFO: Disabling clock on downlink 0
14:01:46:elinks:INFO: Disabling clock on downlink 1
14:01:46:elinks:INFO: Disabling clock on downlink 2
14:01:46:elinks:INFO: Disabling clock on downlink 3
14:01:46:elinks:INFO: Disabling clock on downlink 4
14:01:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:01:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:46:elinks:INFO: Disabling clock on downlink 0
14:01:46:elinks:INFO: Disabling clock on downlink 1
14:01:46:elinks:INFO: Disabling clock on downlink 2
14:01:46:elinks:INFO: Disabling clock on downlink 3
14:01:46:elinks:INFO: Disabling clock on downlink 4
14:01:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:01:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:46:setup_element:INFO: Scanning clock phase
14:01:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:47:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:47:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:01:47:setup_element:INFO: Eye window for uplink 16: _________________________________________________________________________XXXXXXX
Clock Delay: 36
14:01:47:setup_element:INFO: Eye window for uplink 17: _________________________________________________________________________XXXXXXX
Clock Delay: 36
14:01:47:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:47:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:47:setup_element:INFO: Eye window for uplink 20: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:01:47:setup_element:INFO: Eye window for uplink 21: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:01:47:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:01:47:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:01:47:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:01:47:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
14:01:47:setup_element:INFO: Eye window for uplink 28: ________________________________________________________________________________
Clock Delay: 40
14:01:47:setup_element:INFO: Eye window for uplink 29: ________________________________________________________________________________
Clock Delay: 40
14:01:47:setup_element:INFO: Eye window for uplink 30: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:01:47:setup_element:INFO: Eye window for uplink 31: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:01:47:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:01:47:setup_element:INFO: Scanning data phases
14:01:47:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:47:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:52:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:01:52:setup_element:INFO: Eye window for uplink 16: XXXX___________________________________X
Data delay found: 21
14:01:52:setup_element:INFO: Eye window for uplink 17: X__________________________________XXXX_
Data delay found: 17
14:01:52:setup_element:INFO: Eye window for uplink 18: XX_________________________________XXXXX
Data delay found: 18
14:01:52:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXX__
Data delay found: 15
14:01:52:setup_element:INFO: Eye window for uplink 20: X___________________________________XXXX
Data delay found: 18
14:01:52:setup_element:INFO: Eye window for uplink 21: __________________________________XXXXX_
Data delay found: 16
14:01:52:setup_element:INFO: Eye window for uplink 24: ______XXXXX_____________________________
Data delay found: 28
14:01:52:setup_element:INFO: Eye window for uplink 25: _________XXXXX__________________________
Data delay found: 31
14:01:52:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
14:01:52:setup_element:INFO: Eye window for uplink 27: ___________XXXXX________________________
Data delay found: 33
14:01:52:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
14:01:52:setup_element:INFO: Eye window for uplink 29: _____________XXXX_______________________
Data delay found: 34
14:01:52:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
14:01:52:setup_element:INFO: Eye window for uplink 31: ____________XXXXX_______________________
Data delay found: 34
14:01:52:setup_element:INFO: Setting the data phase to 21 for uplink 16
14:01:52:setup_element:INFO: Setting the data phase to 17 for uplink 17
14:01:52:setup_element:INFO: Setting the data phase to 18 for uplink 18
14:01:52:setup_element:INFO: Setting the data phase to 15 for uplink 19
14:01:52:setup_element:INFO: Setting the data phase to 18 for uplink 20
14:01:52:setup_element:INFO: Setting the data phase to 16 for uplink 21
14:01:52:setup_element:INFO: Setting the data phase to 28 for uplink 24
14:01:52:setup_element:INFO: Setting the data phase to 31 for uplink 25
14:01:52:setup_element:INFO: Setting the data phase to 30 for uplink 26
14:01:52:setup_element:INFO: Setting the data phase to 33 for uplink 27
14:01:52:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:01:52:setup_element:INFO: Setting the data phase to 34 for uplink 29
14:01:52:setup_element:INFO: Setting the data phase to 36 for uplink 30
14:01:52:setup_element:INFO: Setting the data phase to 34 for uplink 31
14:01:52:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _________________________________________________________________________XXXXXXX
Uplink 17: _________________________________________________________________________XXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: ________________________________________________________________________________
Uplink 29: ________________________________________________________________________________
Uplink 30: ________________________________________________________________________XXXXXXX_
Uplink 31: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXX_
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 36
Eye Window: _____________XXXX_______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
]
14:01:52:setup_element:INFO: Beginning SMX ASICs map scan
14:01:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:53:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:53:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:01:53:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:01:53:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
14:01:53:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:01:53:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:01:53:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
14:01:53:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
14:01:53:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:01:53:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:01:53:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:01:53:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:01:53:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:01:53:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:01:54:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:01:54:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:01:54:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:01:54:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:01:55:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _________________________________________________________________________XXXXXXX
Uplink 17: _________________________________________________________________________XXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXX__
Uplink 25: _______________________________________________________________________XXXXXXX__
Uplink 26: _______________________________________________________________________XXXXXXXXX
Uplink 27: _______________________________________________________________________XXXXXXXXX
Uplink 28: ________________________________________________________________________________
Uplink 29: ________________________________________________________________________________
Uplink 30: ________________________________________________________________________XXXXXXX_
Uplink 31: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXX_
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 36
Eye Window: _____________XXXX_______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
14:01:55:setup_element:INFO: Performing Elink synchronization
14:01:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:55:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:55:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:01:55:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:01:55:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:01:55:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
14:01:55:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
14:01:56:smx_tester:INFO: Scanning setup
14:01:56:elinks:INFO: Disabling clock on downlink 0
14:01:56:elinks:INFO: Disabling clock on downlink 1
14:01:56:elinks:INFO: Disabling clock on downlink 2
14:01:56:elinks:INFO: Disabling clock on downlink 3
14:01:56:elinks:INFO: Disabling clock on downlink 4
14:01:56:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:56:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:01:56:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:56:elinks:INFO: Disabling clock on downlink 0
14:01:56:elinks:INFO: Disabling clock on downlink 1
14:01:56:elinks:INFO: Disabling clock on downlink 2
14:01:56:elinks:INFO: Disabling clock on downlink 3
14:01:56:elinks:INFO: Disabling clock on downlink 4
14:01:56:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:56:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:01:56:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:56:elinks:INFO: Disabling clock on downlink 0
14:01:56:elinks:INFO: Disabling clock on downlink 1
14:01:56:elinks:INFO: Disabling clock on downlink 2
14:01:56:elinks:INFO: Disabling clock on downlink 3
14:01:56:elinks:INFO: Disabling clock on downlink 4
14:01:56:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:56:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:56:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:01:57:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:01:57:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:57:elinks:INFO: Disabling clock on downlink 0
14:01:57:elinks:INFO: Disabling clock on downlink 1
14:01:57:elinks:INFO: Disabling clock on downlink 2
14:01:57:elinks:INFO: Disabling clock on downlink 3
14:01:57:elinks:INFO: Disabling clock on downlink 4
14:01:57:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:57:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:01:57:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:57:elinks:INFO: Disabling clock on downlink 0
14:01:57:elinks:INFO: Disabling clock on downlink 1
14:01:57:elinks:INFO: Disabling clock on downlink 2
14:01:57:elinks:INFO: Disabling clock on downlink 3
14:01:57:elinks:INFO: Disabling clock on downlink 4
14:01:57:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:01:57:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:01:57:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:01:57:setup_element:INFO: Scanning clock phase
14:01:57:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:57:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:01:57:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:01:57:setup_element:INFO: Eye window for uplink 16: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:01:57:setup_element:INFO: Eye window for uplink 17: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
14:01:57:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:57:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:57:setup_element:INFO: Eye window for uplink 20: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:01:57:setup_element:INFO: Eye window for uplink 21: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:01:57:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:57:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:57:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:57:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:01:57:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:01:57:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:01:57:setup_element:INFO: Eye window for uplink 30: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:01:57:setup_element:INFO: Eye window for uplink 31: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:01:57:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
14:01:57:setup_element:INFO: Scanning data phases
14:01:57:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:01:57:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:02:03:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:02:03:setup_element:INFO: Eye window for uplink 16: XXXX___________________________________X
Data delay found: 21
14:02:03:setup_element:INFO: Eye window for uplink 17: ___________________________________XXXXX
Data delay found: 17
14:02:03:setup_element:INFO: Eye window for uplink 18: XX_________________________________XXXXX
Data delay found: 18
14:02:03:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXX__
Data delay found: 15
14:02:03:setup_element:INFO: Eye window for uplink 20: ____________________________________XXXX
Data delay found: 17
14:02:03:setup_element:INFO: Eye window for uplink 21: __________________________________XXXXX_
Data delay found: 16
14:02:03:setup_element:INFO: Eye window for uplink 24: _____XXXXXX_____________________________
Data delay found: 27
14:02:03:setup_element:INFO: Eye window for uplink 25: _________XXXXX__________________________
Data delay found: 31
14:02:03:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
14:02:03:setup_element:INFO: Eye window for uplink 27: ____________XXXXX_______________________
Data delay found: 34
14:02:03:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
14:02:03:setup_element:INFO: Eye window for uplink 29: _____________XXXXX______________________
Data delay found: 35
14:02:03:setup_element:INFO: Eye window for uplink 30: _____________XXXXXXXX___________________
Data delay found: 36
14:02:03:setup_element:INFO: Eye window for uplink 31: ____________XXXXX_______________________
Data delay found: 34
14:02:03:setup_element:INFO: Setting the data phase to 21 for uplink 16
14:02:03:setup_element:INFO: Setting the data phase to 17 for uplink 17
14:02:03:setup_element:INFO: Setting the data phase to 18 for uplink 18
14:02:03:setup_element:INFO: Setting the data phase to 15 for uplink 19
14:02:03:setup_element:INFO: Setting the data phase to 17 for uplink 20
14:02:03:setup_element:INFO: Setting the data phase to 16 for uplink 21
14:02:03:setup_element:INFO: Setting the data phase to 27 for uplink 24
14:02:03:setup_element:INFO: Setting the data phase to 31 for uplink 25
14:02:03:setup_element:INFO: Setting the data phase to 30 for uplink 26
14:02:03:setup_element:INFO: Setting the data phase to 34 for uplink 27
14:02:03:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:02:03:setup_element:INFO: Setting the data phase to 35 for uplink 29
14:02:03:setup_element:INFO: Setting the data phase to 36 for uplink 30
14:02:03:setup_element:INFO: Setting the data phase to 34 for uplink 31
14:02:03:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXXX
Uplink 17: ________________________________________________________________________XXXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: ________________________________________________________________________XXXXXXX_
Uplink 31: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 17
Window Length: 36
Eye Window: ____________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 24:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 32
Eye Window: _____________XXXXXXXX___________________
Uplink 31:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
]
14:02:03:setup_element:INFO: Beginning SMX ASICs map scan
14:02:03:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:02:03:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:02:03:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:02:03:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:02:03:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
14:02:03:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:02:03:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:02:03:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
14:02:03:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
14:02:03:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:02:03:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:02:04:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
14:02:04:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
14:02:04:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:02:04:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:02:04:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
14:02:04:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
14:02:04:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:02:04:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:02:05:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXXX
Uplink 17: ________________________________________________________________________XXXXXXXX
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: ________________________________________________________________________XXXXXXX_
Uplink 31: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 17
Window Length: 36
Eye Window: ____________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 24:
Optimal Phase: 27
Window Length: 34
Eye Window: _____XXXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 32
Eye Window: _____________XXXXXXXX___________________
Uplink 31:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
14:02:05:setup_element:INFO: Performing Elink synchronization
14:02:05:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:02:05:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:02:05:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:02:05:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:02:05:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:02:05:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
14:02:06:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:02:06:febtest:ERROR: HW addres 1 != 0
14:03:41:febtest:INFO: FEB type: 8.2
14:03:42:febtest:INFO: FEB SN: 1116
14:03:44:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:03:44:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:03:44:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:03:45:febtest:INFO: Testing FEB with SN 1116
14:03:48:smx_tester:INFO: Scanning setup
14:03:48:elinks:INFO: Disabling clock on downlink 0
14:03:48:elinks:INFO: Disabling clock on downlink 1
14:03:48:elinks:INFO: Disabling clock on downlink 2
14:03:48:elinks:INFO: Disabling clock on downlink 3
14:03:48:elinks:INFO: Disabling clock on downlink 4
14:03:48:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:03:48:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:03:48:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:03:48:elinks:INFO: Disabling clock on downlink 0
14:03:48:elinks:INFO: Disabling clock on downlink 1
14:03:48:elinks:INFO: Disabling clock on downlink 2
14:03:48:elinks:INFO: Disabling clock on downlink 3
14:03:48:elinks:INFO: Disabling clock on downlink 4
14:03:48:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:03:48:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:03:48:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:03:48:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:03:48:elinks:INFO: Disabling clock on downlink 0
14:03:48:elinks:INFO: Disabling clock on downlink 1
14:03:48:elinks:INFO: Disabling clock on downlink 2
14:03:48:elinks:INFO: Disabling clock on downlink 3
14:03:48:elinks:INFO: Disabling clock on downlink 4
14:03:48:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:03:48:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:03:48:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:03:48:elinks:INFO: Disabling clock on downlink 0
14:03:48:elinks:INFO: Disabling clock on downlink 1
14:03:48:elinks:INFO: Disabling clock on downlink 2
14:03:48:elinks:INFO: Disabling clock on downlink 3
14:03:48:elinks:INFO: Disabling clock on downlink 4
14:03:48:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:03:48:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:03:48:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:03:48:elinks:INFO: Disabling clock on downlink 0
14:03:48:elinks:INFO: Disabling clock on downlink 1
14:03:48:elinks:INFO: Disabling clock on downlink 2
14:03:48:elinks:INFO: Disabling clock on downlink 3
14:03:48:elinks:INFO: Disabling clock on downlink 4
14:03:48:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:03:48:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:03:49:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:03:49:setup_element:INFO: Scanning clock phase
14:03:49:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:03:49:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:03:49:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:03:49:setup_element:INFO: Eye window for uplink 0 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:03:49:setup_element:INFO: Eye window for uplink 1 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
14:03:49:setup_element:INFO: Eye window for uplink 2 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 3 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 4 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 5 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 6 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 7 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 10: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 11: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:03:49:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:03:49:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:03:49:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:03:49:setup_element:INFO: Scanning data phases
14:03:49:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:03:49:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:03:54:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:03:54:setup_element:INFO: Eye window for uplink 0 : ____________XXXXX_______________________
Data delay found: 34
14:03:54:setup_element:INFO: Eye window for uplink 1 : _______XXXXX____________________________
Data delay found: 29
14:03:55:setup_element:INFO: Eye window for uplink 2 : _____XXXXX______________________________
Data delay found: 27
14:03:55:setup_element:INFO: Eye window for uplink 3 : __XXXXX_________________________________
Data delay found: 24
14:03:55:setup_element:INFO: Eye window for uplink 4 : ____XXXXX_______________________________
Data delay found: 26
14:03:55:setup_element:INFO: Eye window for uplink 5 : _XXXX__________________________________X
Data delay found: 21
14:03:55:setup_element:INFO: Eye window for uplink 6 : X___________________________________XXXX
Data delay found: 18
14:03:55:setup_element:INFO: Eye window for uplink 7 : ________________________________XXXXX___
Data delay found: 14
14:03:55:setup_element:INFO: Eye window for uplink 8 : __________________________XXXX__________
Data delay found: 7
14:03:55:setup_element:INFO: Eye window for uplink 9 : ______________________________XXXXXX____
Data delay found: 12
14:03:55:setup_element:INFO: Eye window for uplink 10: __________________________XXXXXX________
Data delay found: 8
14:03:55:setup_element:INFO: Eye window for uplink 11: ______________________________XXXXX_____
Data delay found: 12
14:03:55:setup_element:INFO: Eye window for uplink 12: ___________________________XXXXX________
Data delay found: 9
14:03:55:setup_element:INFO: Eye window for uplink 13: ______________________________XXXXX_____
Data delay found: 12
14:03:55:setup_element:INFO: Eye window for uplink 14: ___________________________XXXXXX_______
Data delay found: 9
14:03:55:setup_element:INFO: Eye window for uplink 15: _____________________________XXXXXX_____
Data delay found: 11
14:03:55:setup_element:INFO: Setting the data phase to 34 for uplink 0
14:03:55:setup_element:INFO: Setting the data phase to 29 for uplink 1
14:03:55:setup_element:INFO: Setting the data phase to 27 for uplink 2
14:03:55:setup_element:INFO: Setting the data phase to 24 for uplink 3
14:03:55:setup_element:INFO: Setting the data phase to 26 for uplink 4
14:03:55:setup_element:INFO: Setting the data phase to 21 for uplink 5
14:03:55:setup_element:INFO: Setting the data phase to 18 for uplink 6
14:03:55:setup_element:INFO: Setting the data phase to 14 for uplink 7
14:03:55:setup_element:INFO: Setting the data phase to 7 for uplink 8
14:03:55:setup_element:INFO: Setting the data phase to 12 for uplink 9
14:03:55:setup_element:INFO: Setting the data phase to 8 for uplink 10
14:03:55:setup_element:INFO: Setting the data phase to 12 for uplink 11
14:03:55:setup_element:INFO: Setting the data phase to 9 for uplink 12
14:03:55:setup_element:INFO: Setting the data phase to 12 for uplink 13
14:03:55:setup_element:INFO: Setting the data phase to 9 for uplink 14
14:03:55:setup_element:INFO: Setting the data phase to 11 for uplink 15
14:03:55:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXX_
Uplink 1: ________________________________________________________________________XXXXXXX_
Uplink 2: ______________________________________________________________________XXXXXXX___
Uplink 3: ______________________________________________________________________XXXXXXX___
Uplink 4: ______________________________________________________________________XXXXXXXX__
Uplink 5: ______________________________________________________________________XXXXXXXX__
Uplink 6: ______________________________________________________________________XXXXXXXX__
Uplink 7: ______________________________________________________________________XXXXXXXX__
Uplink 8: _____________________________________________________________________XXXXXXXXX__
Uplink 9: _____________________________________________________________________XXXXXXXXX__
Uplink 10: ______________________________________________________________________XXXXXXX___
Uplink 11: ______________________________________________________________________XXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXXX_
Uplink 15: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 3:
Optimal Phase: 24
Window Length: 35
Eye Window: __XXXXX_________________________________
Uplink 4:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 5:
Optimal Phase: 21
Window Length: 34
Eye Window: _XXXX__________________________________X
Uplink 6:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 7:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 8:
Optimal Phase: 7
Window Length: 36
Eye Window: __________________________XXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
Uplink 10:
Optimal Phase: 8
Window Length: 34
Eye Window: __________________________XXXXXX________
Uplink 11:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 9
Window Length: 34
Eye Window: ___________________________XXXXXX_______
Uplink 15:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
]
14:03:55:setup_element:INFO: Beginning SMX ASICs map scan
14:03:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:03:55:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:03:55:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:03:55:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:03:55:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:03:55:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:03:55:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:03:55:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:03:55:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:03:55:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:03:55:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:03:55:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:03:55:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:03:56:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:03:56:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:03:56:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:03:56:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:03:56:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:03:56:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:03:56:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:03:56:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:03:57:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXX_
Uplink 1: ________________________________________________________________________XXXXXXX_
Uplink 2: ______________________________________________________________________XXXXXXX___
Uplink 3: ______________________________________________________________________XXXXXXX___
Uplink 4: ______________________________________________________________________XXXXXXXX__
Uplink 5: ______________________________________________________________________XXXXXXXX__
Uplink 6: ______________________________________________________________________XXXXXXXX__
Uplink 7: ______________________________________________________________________XXXXXXXX__
Uplink 8: _____________________________________________________________________XXXXXXXXX__
Uplink 9: _____________________________________________________________________XXXXXXXXX__
Uplink 10: ______________________________________________________________________XXXXXXX___
Uplink 11: ______________________________________________________________________XXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXXX_
Uplink 15: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 2:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 3:
Optimal Phase: 24
Window Length: 35
Eye Window: __XXXXX_________________________________
Uplink 4:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 5:
Optimal Phase: 21
Window Length: 34
Eye Window: _XXXX__________________________________X
Uplink 6:
Optimal Phase: 18
Window Length: 35
Eye Window: X___________________________________XXXX
Uplink 7:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 8:
Optimal Phase: 7
Window Length: 36
Eye Window: __________________________XXXX__________
Uplink 9:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
Uplink 10:
Optimal Phase: 8
Window Length: 34
Eye Window: __________________________XXXXXX________
Uplink 11:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 12:
Optimal Phase: 9
Window Length: 35
Eye Window: ___________________________XXXXX________
Uplink 13:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 14:
Optimal Phase: 9
Window Length: 34
Eye Window: ___________________________XXXXXX_______
Uplink 15:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
14:03:57:setup_element:INFO: Performing Elink synchronization
14:03:58:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:03:58:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:03:58:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:03:58:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:03:58:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:03:58:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:03:58:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
14:03:58:smx_tester:INFO: Scanning setup
14:03:58:elinks:INFO: Disabling clock on downlink 0
14:03:58:elinks:INFO: Disabling clock on downlink 1
14:03:58:elinks:INFO: Disabling clock on downlink 2
14:03:58:elinks:INFO: Disabling clock on downlink 3
14:03:58:elinks:INFO: Disabling clock on downlink 4
14:03:58:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:03:58:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:03:58:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:03:58:elinks:INFO: Disabling clock on downlink 0
14:03:58:elinks:INFO: Disabling clock on downlink 1
14:03:58:elinks:INFO: Disabling clock on downlink 2
14:03:58:elinks:INFO: Disabling clock on downlink 3
14:03:58:elinks:INFO: Disabling clock on downlink 4
14:03:58:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:03:58:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:03:59:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:03:59:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:03:59:elinks:INFO: Disabling clock on downlink 0
14:03:59:elinks:INFO: Disabling clock on downlink 1
14:03:59:elinks:INFO: Disabling clock on downlink 2
14:03:59:elinks:INFO: Disabling clock on downlink 3
14:03:59:elinks:INFO: Disabling clock on downlink 4
14:03:59:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:03:59:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:03:59:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:03:59:elinks:INFO: Disabling clock on downlink 0
14:03:59:elinks:INFO: Disabling clock on downlink 1
14:03:59:elinks:INFO: Disabling clock on downlink 2
14:03:59:elinks:INFO: Disabling clock on downlink 3
14:03:59:elinks:INFO: Disabling clock on downlink 4
14:03:59:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:03:59:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:03:59:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:03:59:elinks:INFO: Disabling clock on downlink 0
14:03:59:elinks:INFO: Disabling clock on downlink 1
14:03:59:elinks:INFO: Disabling clock on downlink 2
14:03:59:elinks:INFO: Disabling clock on downlink 3
14:03:59:elinks:INFO: Disabling clock on downlink 4
14:03:59:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:03:59:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:03:59:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:03:59:setup_element:INFO: Scanning clock phase
14:03:59:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:03:59:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:03:59:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:03:59:setup_element:INFO: Eye window for uplink 0 : ________________________________________________________________________________
Clock Delay: 40
14:03:59:setup_element:INFO: Eye window for uplink 1 : ________________________________________________________________________________
Clock Delay: 40
14:03:59:setup_element:INFO: Eye window for uplink 2 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 3 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 4 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 5 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 6 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 7 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 8 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 9 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 10: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 11: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:03:59:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:03:59:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:03:59:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 1
14:03:59:setup_element:INFO: Scanning data phases
14:03:59:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:04:00:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:04:05:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:04:05:setup_element:INFO: Eye window for uplink 0 : __________XXXXX_________________________
Data delay found: 32
14:04:05:setup_element:INFO: Eye window for uplink 1 : ______XXXXX_____________________________
Data delay found: 28
14:04:05:setup_element:INFO: Eye window for uplink 2 : ____XXXX________________________________
Data delay found: 25
14:04:05:setup_element:INFO: Eye window for uplink 3 : XXXXXX__________________________________
Data delay found: 22
14:04:05:setup_element:INFO: Eye window for uplink 4 : ___XXXXX________________________________
Data delay found: 25
14:04:05:setup_element:INFO: Eye window for uplink 5 : XXXX__________________________________XX
Data delay found: 20
14:04:05:setup_element:INFO: Eye window for uplink 6 : ___________________________________XXXXX
Data delay found: 17
14:04:05:setup_element:INFO: Eye window for uplink 7 : _______________________________XXXXX____
Data delay found: 13
14:04:05:setup_element:INFO: Eye window for uplink 8 : _________________________XXXX___________
Data delay found: 6
14:04:05:setup_element:INFO: Eye window for uplink 9 : _____________________________XXXXXX_____
Data delay found: 11
14:04:05:setup_element:INFO: Eye window for uplink 10: _________________________XXXXXX_________
Data delay found: 7
14:04:05:setup_element:INFO: Eye window for uplink 11: ______________________________XXXX______
Data delay found: 11
14:04:05:setup_element:INFO: Eye window for uplink 12: ___________________________XXXXXXXXXXXXX
Data delay found: 13
14:04:05:setup_element:INFO: Eye window for uplink 13: _____________________________XXXXXXXXXXX
Data delay found: 14
14:04:05:setup_element:INFO: Eye window for uplink 14: ___________________________XXXXXX_______
Data delay found: 9
14:04:05:setup_element:INFO: Eye window for uplink 15: _____________________________XXXXXX_____
Data delay found: 11
14:04:05:setup_element:INFO: Setting the data phase to 32 for uplink 0
14:04:05:setup_element:INFO: Setting the data phase to 28 for uplink 1
14:04:05:setup_element:INFO: Setting the data phase to 25 for uplink 2
14:04:05:setup_element:INFO: Setting the data phase to 22 for uplink 3
14:04:05:setup_element:INFO: Setting the data phase to 25 for uplink 4
14:04:05:setup_element:INFO: Setting the data phase to 20 for uplink 5
14:04:05:setup_element:INFO: Setting the data phase to 17 for uplink 6
14:04:05:setup_element:INFO: Setting the data phase to 13 for uplink 7
14:04:05:setup_element:INFO: Setting the data phase to 6 for uplink 8
14:04:05:setup_element:INFO: Setting the data phase to 11 for uplink 9
14:04:05:setup_element:INFO: Setting the data phase to 7 for uplink 10
14:04:05:setup_element:INFO: Setting the data phase to 11 for uplink 11
14:04:05:setup_element:INFO: Setting the data phase to 13 for uplink 12
14:04:05:setup_element:INFO: Setting the data phase to 14 for uplink 13
14:04:05:setup_element:INFO: Setting the data phase to 9 for uplink 14
14:04:05:setup_element:INFO: Setting the data phase to 11 for uplink 15
14:04:05:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 71
Eye Windows:
Uplink 0: ________________________________________________________________________________
Uplink 1: ________________________________________________________________________________
Uplink 2: ______________________________________________________________________XXXXXXX___
Uplink 3: ______________________________________________________________________XXXXXXX___
Uplink 4: ______________________________________________________________________XXXXXXX___
Uplink 5: ______________________________________________________________________XXXXXXX___
Uplink 6: ______________________________________________________________________XXXXXXXX__
Uplink 7: ______________________________________________________________________XXXXXXXX__
Uplink 8: ______________________________________________________________________XXXXXXXX__
Uplink 9: ______________________________________________________________________XXXXXXXX__
Uplink 10: ______________________________________________________________________XXXXXXX___
Uplink 11: ______________________________________________________________________XXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: _______________________________________________________________________XXXXXXXX_
Uplink 15: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 1:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 2:
Optimal Phase: 25
Window Length: 36
Eye Window: ____XXXX________________________________
Uplink 3:
Optimal Phase: 22
Window Length: 34
Eye Window: XXXXXX__________________________________
Uplink 4:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 5:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 6:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 7:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 8:
Optimal Phase: 6
Window Length: 36
Eye Window: _________________________XXXX___________
Uplink 9:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 34
Eye Window: _________________________XXXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 12:
Optimal Phase: 13
Window Length: 27
Eye Window: ___________________________XXXXXXXXXXXXX
Uplink 13:
Optimal Phase: 14
Window Length: 29
Eye Window: _____________________________XXXXXXXXXXX
Uplink 14:
Optimal Phase: 9
Window Length: 34
Eye Window: ___________________________XXXXXX_______
Uplink 15:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
]
14:04:05:setup_element:INFO: Beginning SMX ASICs map scan
14:04:05:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:04:05:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:04:05:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:04:05:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:04:05:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:04:05:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
14:04:05:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
14:04:05:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:04:06:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:04:06:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
14:04:06:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
14:04:06:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:04:06:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:04:06:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
14:04:06:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
14:04:06:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:04:06:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:04:06:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
14:04:06:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
14:04:07:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:04:07:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:04:08:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 71
Eye Windows:
Uplink 0: ________________________________________________________________________________
Uplink 1: ________________________________________________________________________________
Uplink 2: ______________________________________________________________________XXXXXXX___
Uplink 3: ______________________________________________________________________XXXXXXX___
Uplink 4: ______________________________________________________________________XXXXXXX___
Uplink 5: ______________________________________________________________________XXXXXXX___
Uplink 6: ______________________________________________________________________XXXXXXXX__
Uplink 7: ______________________________________________________________________XXXXXXXX__
Uplink 8: ______________________________________________________________________XXXXXXXX__
Uplink 9: ______________________________________________________________________XXXXXXXX__
Uplink 10: ______________________________________________________________________XXXXXXX___
Uplink 11: ______________________________________________________________________XXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXX___
Uplink 13: ______________________________________________________________________XXXXXXX___
Uplink 14: _______________________________________________________________________XXXXXXXX_
Uplink 15: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 1:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 2:
Optimal Phase: 25
Window Length: 36
Eye Window: ____XXXX________________________________
Uplink 3:
Optimal Phase: 22
Window Length: 34
Eye Window: XXXXXX__________________________________
Uplink 4:
Optimal Phase: 25
Window Length: 35
Eye Window: ___XXXXX________________________________
Uplink 5:
Optimal Phase: 20
Window Length: 34
Eye Window: XXXX__________________________________XX
Uplink 6:
Optimal Phase: 17
Window Length: 35
Eye Window: ___________________________________XXXXX
Uplink 7:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 8:
Optimal Phase: 6
Window Length: 36
Eye Window: _________________________XXXX___________
Uplink 9:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 10:
Optimal Phase: 7
Window Length: 34
Eye Window: _________________________XXXXXX_________
Uplink 11:
Optimal Phase: 11
Window Length: 36
Eye Window: ______________________________XXXX______
Uplink 12:
Optimal Phase: 13
Window Length: 27
Eye Window: ___________________________XXXXXXXXXXXXX
Uplink 13:
Optimal Phase: 14
Window Length: 29
Eye Window: _____________________________XXXXXXXXXXX
Uplink 14:
Optimal Phase: 9
Window Length: 34
Eye Window: ___________________________XXXXXX_______
Uplink 15:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
14:04:08:setup_element:INFO: Performing Elink synchronization
14:04:08:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:04:08:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:04:08:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:04:08:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:04:08:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:04:08:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
14:04:08:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
14:04:10:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:04:10:febtest:INFO: 01-00 | XA-000-08-002-000-000-248-08 | 50.4 | 1141.9
14:04:10:febtest:INFO: 08-01 | XA-000-08-002-000-004-210-00 | 15.6 | 1277.1
14:04:10:febtest:INFO: 03-02 | XA-000-08-002-000-005-010-05 | 40.9 | 1177.4
14:04:11:febtest:INFO: 10-03 | XA-000-08-002-000-004-214-00 | 28.2 | 1224.5
14:04:11:febtest:INFO: 05-04 | XA-000-08-002-000-000-249-08 | 50.4 | 1147.8
14:04:11:febtest:INFO: 12-05 | XA-000-08-002-000-004-183-11 | 34.6 | 1195.1
14:04:11:febtest:INFO: 07-06 | XA-000-08-002-000-000-250-08 | 37.7 | 1183.3
14:04:12:febtest:INFO: 14-07 | XA-000-08-002-000-004-169-12 | 34.6 | 1206.9
14:04:12:ST3_smx:INFO: Configuring SMX FAST
14:04:14:ST3_smx:INFO: chip: 1-0 50.430383 C 1141.874115 mV
14:04:14:ST3_smx:INFO: Electrons
14:04:14:ST3_smx:INFO: # loops 0
14:04:15:ST3_smx:INFO: # loops 1
14:04:17:ST3_smx:INFO: # loops 2
14:04:18:ST3_smx:INFO: Total # of broken channels: 1
14:04:18:ST3_smx:INFO: List of broken channels: [1]
14:04:18:ST3_smx:INFO: Total # of broken channels: 2
14:04:18:ST3_smx:INFO: List of broken channels: [0, 1]
14:04:19:ST3_smx:INFO: Configuring SMX FAST
14:04:21:ST3_smx:INFO: chip: 8-1 28.225000 C 1236.187875 mV
14:04:21:ST3_smx:INFO: Electrons
14:04:21:ST3_smx:INFO: # loops 0
14:04:23:ST3_smx:INFO: # loops 1
14:04:25:ST3_smx:INFO: # loops 2
14:04:26:ST3_smx:INFO: Total # of broken channels: 0
14:04:26:ST3_smx:INFO: List of broken channels: []
14:04:26:ST3_smx:INFO: Total # of broken channels: 0
14:04:26:ST3_smx:INFO: List of broken channels: []
14:04:27:ST3_smx:INFO: Configuring SMX FAST
14:04:29:ST3_smx:INFO: chip: 3-2 40.898880 C 1177.390875 mV
14:04:29:ST3_smx:INFO: Electrons
14:04:29:ST3_smx:INFO: # loops 0
14:04:31:ST3_smx:INFO: # loops 1
14:04:32:ST3_smx:INFO: # loops 2
14:04:34:ST3_smx:INFO: Total # of broken channels: 0
14:04:34:ST3_smx:INFO: List of broken channels: []
14:04:34:ST3_smx:INFO: Total # of broken channels: 0
14:04:34:ST3_smx:INFO: List of broken channels: []
14:04:35:ST3_smx:INFO: Configuring SMX FAST
14:04:37:ST3_smx:INFO: chip: 10-3 25.062742 C 1242.040240 mV
14:04:37:ST3_smx:INFO: Electrons
14:04:37:ST3_smx:INFO: # loops 0
14:04:38:ST3_smx:INFO: # loops 1
14:04:40:ST3_smx:INFO: # loops 2
14:04:41:ST3_smx:INFO: Total # of broken channels: 0
14:04:41:ST3_smx:INFO: List of broken channels: []
14:04:41:ST3_smx:INFO: Total # of broken channels: 0
14:04:41:ST3_smx:INFO: List of broken channels: []
14:04:42:ST3_smx:INFO: Configuring SMX FAST
14:04:44:ST3_smx:INFO: chip: 5-4 53.612520 C 1135.937260 mV
14:04:44:ST3_smx:INFO: Electrons
14:04:44:ST3_smx:INFO: # loops 0
14:04:46:ST3_smx:INFO: # loops 1
14:04:47:ST3_smx:INFO: # loops 2
14:04:49:ST3_smx:INFO: Total # of broken channels: 0
14:04:49:ST3_smx:INFO: List of broken channels: []
14:04:49:ST3_smx:INFO: Total # of broken channels: 1
14:04:49:ST3_smx:INFO: List of broken channels: [19]
14:04:50:ST3_smx:INFO: Configuring SMX FAST
14:04:52:ST3_smx:INFO: chip: 12-5 44.073563 C 1165.571835 mV
14:04:52:ST3_smx:INFO: Electrons
14:04:52:ST3_smx:INFO: # loops 0
14:04:53:ST3_smx:INFO: # loops 1
14:04:55:ST3_smx:INFO: # loops 2
14:04:57:ST3_smx:INFO: Total # of broken channels: 0
14:04:57:ST3_smx:INFO: List of broken channels: []
14:04:57:ST3_smx:INFO: Total # of broken channels: 0
14:04:57:ST3_smx:INFO: List of broken channels: []
14:04:58:ST3_smx:INFO: Configuring SMX FAST
14:04:59:ST3_smx:INFO: chip: 7-6 47.250730 C 1147.806000 mV
14:04:59:ST3_smx:INFO: Electrons
14:04:59:ST3_smx:INFO: # loops 0
14:05:01:ST3_smx:INFO: # loops 1
14:05:03:ST3_smx:INFO: # loops 2
14:05:04:ST3_smx:INFO: Total # of broken channels: 0
14:05:04:ST3_smx:INFO: List of broken channels: []
14:05:04:ST3_smx:INFO: Total # of broken channels: 0
14:05:04:ST3_smx:INFO: List of broken channels: []
14:05:05:ST3_smx:INFO: Configuring SMX FAST
14:05:07:ST3_smx:INFO: chip: 14-7 31.389742 C 1218.600960 mV
14:05:07:ST3_smx:INFO: Electrons
14:05:07:ST3_smx:INFO: # loops 0
14:05:09:ST3_smx:INFO: # loops 1
14:05:11:ST3_smx:INFO: # loops 2
14:05:12:ST3_smx:INFO: Total # of broken channels: 0
14:05:12:ST3_smx:INFO: List of broken channels: []
14:05:12:ST3_smx:INFO: Total # of broken channels: 0
14:05:12:ST3_smx:INFO: List of broken channels: []
14:05:13:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:05:13:febtest:INFO: 01-00 | XA-000-08-002-000-000-248-08 | 50.4 | 1141.9
14:05:13:febtest:INFO: 08-01 | XA-000-08-002-000-004-210-00 | 28.2 | 1236.2
14:05:14:febtest:INFO: 03-02 | XA-000-08-002-000-005-010-05 | 40.9 | 1177.4
14:05:14:febtest:INFO: 10-03 | XA-000-08-002-000-004-214-00 | 25.1 | 1242.0
14:05:14:febtest:INFO: 05-04 | XA-000-08-002-000-000-249-08 | 53.6 | 1135.9
14:05:14:febtest:INFO: 12-05 | XA-000-08-002-000-004-183-11 | 44.1 | 1165.6
14:05:15:febtest:INFO: 07-06 | XA-000-08-002-000-000-250-08 | 50.4 | 1147.8
14:05:15:febtest:INFO: 14-07 | XA-000-08-002-000-004-169-12 | 31.4 | 1218.6
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_27-14_03_44
OPERATOR : Olga B.; Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1116
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.451', '1.5220', '1.850', '2.8540', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '1.9970', '1.850', '0.4517', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '1.9910', '1.850', '0.3152', '0.000', '0.0000', '0.000', '0.0000']
14:05:55:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:10:56:ST3_Shared:INFO: Listo of operators:Oleksandr S.;
14:11:00:febtest:INFO: FEB type: 8.2
14:11:00:febtest:INFO: FEB SN: 1114
14:11:02:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:11:02:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:11:02:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:11:02:febtest:INFO: Testing FEB with SN 1114
14:11:05:smx_tester:INFO: Scanning setup
14:11:05:elinks:INFO: Disabling clock on downlink 0
14:11:05:elinks:INFO: Disabling clock on downlink 1
14:11:05:elinks:INFO: Disabling clock on downlink 2
14:11:05:elinks:INFO: Disabling clock on downlink 3
14:11:05:elinks:INFO: Disabling clock on downlink 4
14:11:05:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:05:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:11:05:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:05:elinks:INFO: Disabling clock on downlink 0
14:11:05:elinks:INFO: Disabling clock on downlink 1
14:11:05:elinks:INFO: Disabling clock on downlink 2
14:11:05:elinks:INFO: Disabling clock on downlink 3
14:11:05:elinks:INFO: Disabling clock on downlink 4
14:11:05:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:05:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:05:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:11:05:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:11:05:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:11:05:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:11:05:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:11:05:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:11:05:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:11:05:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:11:05:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:05:elinks:INFO: Disabling clock on downlink 0
14:11:05:elinks:INFO: Disabling clock on downlink 1
14:11:05:elinks:INFO: Disabling clock on downlink 2
14:11:05:elinks:INFO: Disabling clock on downlink 3
14:11:05:elinks:INFO: Disabling clock on downlink 4
14:11:05:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:05:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:06:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:06:elinks:INFO: Disabling clock on downlink 0
14:11:06:elinks:INFO: Disabling clock on downlink 1
14:11:06:elinks:INFO: Disabling clock on downlink 2
14:11:06:elinks:INFO: Disabling clock on downlink 3
14:11:06:elinks:INFO: Disabling clock on downlink 4
14:11:06:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:06:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:11:06:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:06:elinks:INFO: Disabling clock on downlink 0
14:11:06:elinks:INFO: Disabling clock on downlink 1
14:11:06:elinks:INFO: Disabling clock on downlink 2
14:11:06:elinks:INFO: Disabling clock on downlink 3
14:11:06:elinks:INFO: Disabling clock on downlink 4
14:11:06:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:06:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:11:06:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:06:setup_element:INFO: Scanning clock phase
14:11:06:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:06:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:11:06:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:11:06:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:11:06:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:11:06:setup_element:INFO: Eye window for uplink 10: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:11:06:setup_element:INFO: Eye window for uplink 11: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:11:06:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:11:06:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:11:06:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:11:06:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXX___
Clock Delay: 33
14:11:06:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:11:06:setup_element:INFO: Scanning data phases
14:11:06:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:06:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:11:11:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:11:11:setup_element:INFO: Eye window for uplink 8 : _____________________________XXXX_______
Data delay found: 10
14:11:11:setup_element:INFO: Eye window for uplink 9 : __________________________________XXXXX_
Data delay found: 16
14:11:12:setup_element:INFO: Eye window for uplink 10: ______________________________XXXXXX____
Data delay found: 12
14:11:12:setup_element:INFO: Eye window for uplink 11: X_________________________________XXXXX_
Data delay found: 17
14:11:12:setup_element:INFO: Eye window for uplink 12: ________________________________XXXX____
Data delay found: 13
14:11:12:setup_element:INFO: Eye window for uplink 13: XX_________________________________XXXXX
Data delay found: 18
14:11:12:setup_element:INFO: Eye window for uplink 14: ________________________________XXXX____
Data delay found: 13
14:11:12:setup_element:INFO: Eye window for uplink 15: X________________________________XXXXX__
Data delay found: 16
14:11:12:setup_element:INFO: Setting the data phase to 10 for uplink 8
14:11:12:setup_element:INFO: Setting the data phase to 16 for uplink 9
14:11:12:setup_element:INFO: Setting the data phase to 12 for uplink 10
14:11:12:setup_element:INFO: Setting the data phase to 17 for uplink 11
14:11:12:setup_element:INFO: Setting the data phase to 13 for uplink 12
14:11:12:setup_element:INFO: Setting the data phase to 18 for uplink 13
14:11:12:setup_element:INFO: Setting the data phase to 13 for uplink 14
14:11:12:setup_element:INFO: Setting the data phase to 16 for uplink 15
14:11:12:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ______________________________________________________________________XXXXXXX___
Uplink 11: ______________________________________________________________________XXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXX___
Uplink 15: _______________________________________________________________________XXXXXX___
Data phase characteristics:
Uplink 8:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 9:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 10:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
Uplink 11:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 12:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 13:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 14:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 15:
Optimal Phase: 16
Window Length: 32
Eye Window: X________________________________XXXXX__
]
14:11:12:setup_element:INFO: Beginning SMX ASICs map scan
14:11:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:12:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:11:12:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:11:12:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:11:12:uplink:INFO: Setting uplinks mask [8, 9, 10, 11, 12, 13, 14, 15]
14:11:12:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:11:12:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:11:12:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:11:12:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:11:13:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:11:13:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:11:13:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:11:13:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:11:14:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ______________________________________________________________________XXXXXXX___
Uplink 11: ______________________________________________________________________XXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXX___
Uplink 15: _______________________________________________________________________XXXXXX___
Data phase characteristics:
Uplink 8:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 9:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 10:
Optimal Phase: 12
Window Length: 34
Eye Window: ______________________________XXXXXX____
Uplink 11:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
Uplink 12:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 13:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 14:
Optimal Phase: 13
Window Length: 36
Eye Window: ________________________________XXXX____
Uplink 15:
Optimal Phase: 16
Window Length: 32
Eye Window: X________________________________XXXXX__
14:11:14:setup_element:INFO: Performing Elink synchronization
14:11:14:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:14:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:11:14:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:11:14:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:11:14:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:11:14:uplink:INFO: Enabling uplinks [8, 9, 10, 11, 12, 13, 14, 15]
14:11:14:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
14:11:15:smx_tester:INFO: Scanning setup
14:11:15:elinks:INFO: Disabling clock on downlink 0
14:11:15:elinks:INFO: Disabling clock on downlink 1
14:11:15:elinks:INFO: Disabling clock on downlink 2
14:11:15:elinks:INFO: Disabling clock on downlink 3
14:11:15:elinks:INFO: Disabling clock on downlink 4
14:11:15:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:11:15:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:15:elinks:INFO: Disabling clock on downlink 0
14:11:15:elinks:INFO: Disabling clock on downlink 1
14:11:15:elinks:INFO: Disabling clock on downlink 2
14:11:15:elinks:INFO: Disabling clock on downlink 3
14:11:15:elinks:INFO: Disabling clock on downlink 4
14:11:15:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:11:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:11:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:11:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:11:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:11:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:11:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:11:15:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:11:15:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:15:elinks:INFO: Disabling clock on downlink 0
14:11:15:elinks:INFO: Disabling clock on downlink 1
14:11:15:elinks:INFO: Disabling clock on downlink 2
14:11:15:elinks:INFO: Disabling clock on downlink 3
14:11:15:elinks:INFO: Disabling clock on downlink 4
14:11:15:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:11:15:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:15:elinks:INFO: Disabling clock on downlink 0
14:11:15:elinks:INFO: Disabling clock on downlink 1
14:11:15:elinks:INFO: Disabling clock on downlink 2
14:11:15:elinks:INFO: Disabling clock on downlink 3
14:11:15:elinks:INFO: Disabling clock on downlink 4
14:11:15:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:11:15:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:15:elinks:INFO: Disabling clock on downlink 0
14:11:15:elinks:INFO: Disabling clock on downlink 1
14:11:15:elinks:INFO: Disabling clock on downlink 2
14:11:15:elinks:INFO: Disabling clock on downlink 3
14:11:16:elinks:INFO: Disabling clock on downlink 4
14:11:16:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:11:16:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:11:16:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:11:16:setup_element:INFO: Scanning clock phase
14:11:16:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:16:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:11:16:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:11:16:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:11:16:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:11:16:setup_element:INFO: Eye window for uplink 10: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:11:16:setup_element:INFO: Eye window for uplink 11: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:11:16:setup_element:INFO: Eye window for uplink 12: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:11:16:setup_element:INFO: Eye window for uplink 13: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:11:16:setup_element:INFO: Eye window for uplink 14: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:11:16:setup_element:INFO: Eye window for uplink 15: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:11:16:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:11:16:setup_element:INFO: Scanning data phases
14:11:16:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:16:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:11:21:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:11:21:setup_element:INFO: Eye window for uplink 8 : _____________________________XXXX_______
Data delay found: 10
14:11:21:setup_element:INFO: Eye window for uplink 9 : __________________________________XXXXX_
Data delay found: 16
14:11:21:setup_element:INFO: Eye window for uplink 10: ______________XXXXXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 6
14:11:21:setup_element:INFO: Eye window for uplink 11: ______________XXXXXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 6
14:11:21:setup_element:INFO: Eye window for uplink 12: ________________________________XXXXX___
Data delay found: 14
14:11:21:setup_element:INFO: Eye window for uplink 13: ____________________________________XXXX
Data delay found: 17
14:11:21:setup_element:INFO: Eye window for uplink 14: _________________________________XXXX___
Data delay found: 14
14:11:21:setup_element:INFO: Eye window for uplink 15: X_________________________________XXXXX_
Data delay found: 17
14:11:21:setup_element:INFO: Setting the data phase to 10 for uplink 8
14:11:21:setup_element:INFO: Setting the data phase to 16 for uplink 9
14:11:21:setup_element:INFO: Setting the data phase to 6 for uplink 10
14:11:21:setup_element:INFO: Setting the data phase to 6 for uplink 11
14:11:21:setup_element:INFO: Setting the data phase to 14 for uplink 12
14:11:21:setup_element:INFO: Setting the data phase to 17 for uplink 13
14:11:21:setup_element:INFO: Setting the data phase to 14 for uplink 14
14:11:21:setup_element:INFO: Setting the data phase to 17 for uplink 15
14:11:21:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ______________________________________________________________________XXXXXXXX__
Uplink 11: ______________________________________________________________________XXXXXXXX__
Uplink 12: _______________________________________________________________________XXXXXXX__
Uplink 13: _______________________________________________________________________XXXXXXX__
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 8:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 9:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 10:
Optimal Phase: 6
Window Length: 14
Eye Window: ______________XXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 11:
Optimal Phase: 6
Window Length: 14
Eye Window: ______________XXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 12:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 13:
Optimal Phase: 17
Window Length: 36
Eye Window: ____________________________________XXXX
Uplink 14:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 15:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
]
14:11:21:setup_element:INFO: Beginning SMX ASICs map scan
14:11:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:21:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:11:21:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:11:21:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:11:21:uplink:INFO: Setting uplinks mask [8, 9, 10, 11, 12, 13, 14, 15]
14:11:22:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:11:22:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:11:22:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:11:22:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:11:22:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:11:22:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:11:23:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:11:23:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:11:24:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: ______________________________________________________________________XXXXXXXX__
Uplink 11: ______________________________________________________________________XXXXXXXX__
Uplink 12: _______________________________________________________________________XXXXXXX__
Uplink 13: _______________________________________________________________________XXXXXXX__
Uplink 14: ______________________________________________________________________XXXXXXX___
Uplink 15: ______________________________________________________________________XXXXXXX___
Data phase characteristics:
Uplink 8:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 9:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 10:
Optimal Phase: 6
Window Length: 14
Eye Window: ______________XXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 11:
Optimal Phase: 6
Window Length: 14
Eye Window: ______________XXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 12:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 13:
Optimal Phase: 17
Window Length: 36
Eye Window: ____________________________________XXXX
Uplink 14:
Optimal Phase: 14
Window Length: 36
Eye Window: _________________________________XXXX___
Uplink 15:
Optimal Phase: 17
Window Length: 33
Eye Window: X_________________________________XXXXX_
14:11:24:setup_element:INFO: Performing Elink synchronization
14:11:24:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:11:24:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:11:24:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:11:24:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:11:24:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:11:24:uplink:INFO: Enabling uplinks [8, 9, 10, 11, 12, 13, 14, 15]
14:11:24:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
14:11:25:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:11:25:febtest:INFO: 08-01 | XA-000-08-002-000-004-253-14 | 37.7 | 1171.5
14:11:26:febtest:INFO: 10-03 | XA-000-08-002-000-005-001-05 | 15.6 | 1247.9
14:11:26:febtest:INFO: 12-05 | XA-000-08-002-000-005-004-05 | 50.4 | 1135.9
14:11:26:febtest:INFO: 14-07 | XA-000-08-002-000-005-007-05 | 34.6 | 1183.3
14:11:26:ST3_smx:INFO: Configuring SMX FAST
14:11:28:ST3_smx:INFO: chip: 8-1 44.073563 C 1147.806000 mV
14:11:28:ST3_smx:INFO: Electrons
14:11:28:ST3_smx:INFO: # loops 0
14:11:30:ST3_smx:INFO: # loops 1
14:11:31:ST3_smx:INFO: # loops 2
14:11:33:ST3_smx:INFO: Total # of broken channels: 0
14:11:33:ST3_smx:INFO: List of broken channels: []
14:11:33:ST3_smx:INFO: Total # of broken channels: 0
14:11:33:ST3_smx:INFO: List of broken channels: []
14:11:34:ST3_smx:INFO: Configuring SMX FAST
14:11:36:ST3_smx:INFO: chip: 10-3 21.902970 C 1230.330540 mV
14:11:36:ST3_smx:INFO: Electrons
14:11:36:ST3_smx:INFO: # loops 0
14:11:38:ST3_smx:INFO: # loops 1
14:11:39:ST3_smx:INFO: # loops 2
14:11:41:ST3_smx:INFO: Total # of broken channels: 0
14:11:41:ST3_smx:INFO: List of broken channels: []
14:11:41:ST3_smx:INFO: Total # of broken channels: 0
14:11:41:ST3_smx:INFO: List of broken channels: []
14:11:42:ST3_smx:INFO: Configuring SMX FAST
14:11:44:ST3_smx:INFO: chip: 12-5 47.250730 C 1147.806000 mV
14:11:44:ST3_smx:INFO: Electrons
14:11:44:ST3_smx:INFO: # loops 0
14:11:46:ST3_smx:INFO: # loops 1
14:11:47:ST3_smx:INFO: # loops 2
14:11:49:ST3_smx:INFO: Total # of broken channels: 0
14:11:49:ST3_smx:INFO: List of broken channels: []
14:11:49:ST3_smx:INFO: Total # of broken channels: 0
14:11:49:ST3_smx:INFO: List of broken channels: []
14:11:50:ST3_smx:INFO: Configuring SMX FAST
14:11:52:ST3_smx:INFO: chip: 14-7 44.073563 C 1153.732915 mV
14:11:52:ST3_smx:INFO: Electrons
14:11:52:ST3_smx:INFO: # loops 0
14:11:53:ST3_smx:INFO: # loops 1
14:11:55:ST3_smx:INFO: # loops 2
14:11:57:ST3_smx:INFO: Total # of broken channels: 0
14:11:57:ST3_smx:INFO: List of broken channels: []
14:11:57:ST3_smx:INFO: Total # of broken channels: 0
14:11:57:ST3_smx:INFO: List of broken channels: []
14:11:58:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:11:58:febtest:INFO: 08-01 | XA-000-08-002-000-004-253-14 | 44.1 | 1153.7
14:11:58:febtest:INFO: 10-03 | XA-000-08-002-000-005-001-05 | 21.9 | 1230.3
14:11:58:febtest:INFO: 12-05 | XA-000-08-002-000-005-004-05 | 44.1 | 1153.7
14:11:59:febtest:INFO: 14-07 | XA-000-08-002-000-005-007-05 | 44.1 | 1153.7
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_27-14_11_02
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1114
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.452', '0.8981', '1.850', '0.9549', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '0.9890', '1.850', '0.3973', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '0.9843', '1.850', '0.1583', '0.000', '0.0000', '0.000', '0.0000']
14:12:28:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:22:14:febtest:INFO: FEB type: 8.2
14:22:14:febtest:INFO: FEB SN: 1120
14:22:18:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:22:18:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:22:18:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:22:19:febtest:INFO: Testing FEB with SN 1120
14:22:21:smx_tester:INFO: Scanning setup
14:22:21:elinks:INFO: Disabling clock on downlink 0
14:22:21:elinks:INFO: Disabling clock on downlink 1
14:22:21:elinks:INFO: Disabling clock on downlink 2
14:22:21:elinks:INFO: Disabling clock on downlink 3
14:22:21:elinks:INFO: Disabling clock on downlink 4
14:22:21:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:22:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:22:21:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:22:21:elinks:INFO: Disabling clock on downlink 0
14:22:21:elinks:INFO: Disabling clock on downlink 1
14:22:21:elinks:INFO: Disabling clock on downlink 2
14:22:21:elinks:INFO: Disabling clock on downlink 3
14:22:21:elinks:INFO: Disabling clock on downlink 4
14:22:21:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:22:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:22:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:22:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:22:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:22:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:22:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:22:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:22:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:22:22:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:22:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:22:22:elinks:INFO: Disabling clock on downlink 0
14:22:22:elinks:INFO: Disabling clock on downlink 1
14:22:22:elinks:INFO: Disabling clock on downlink 2
14:22:22:elinks:INFO: Disabling clock on downlink 3
14:22:22:elinks:INFO: Disabling clock on downlink 4
14:22:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:22:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:22:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:22:22:elinks:INFO: Disabling clock on downlink 0
14:22:22:elinks:INFO: Disabling clock on downlink 1
14:22:22:elinks:INFO: Disabling clock on downlink 2
14:22:22:elinks:INFO: Disabling clock on downlink 3
14:22:22:elinks:INFO: Disabling clock on downlink 4
14:22:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:22:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:22:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:22:22:elinks:INFO: Disabling clock on downlink 0
14:22:22:elinks:INFO: Disabling clock on downlink 1
14:22:22:elinks:INFO: Disabling clock on downlink 2
14:22:22:elinks:INFO: Disabling clock on downlink 3
14:22:22:elinks:INFO: Disabling clock on downlink 4
14:22:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:22:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:22:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:22:22:setup_element:INFO: Scanning clock phase
14:22:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:22:22:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:22:22:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:22:22:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:22:22:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:22:22:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:22:22:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:22:22:setup_element:INFO: Eye window for uplink 12: ________________________________________________________________________________
Clock Delay: 40
14:22:22:setup_element:INFO: Eye window for uplink 13: ________________________________________________________________________________
Clock Delay: 40
14:22:22:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:22:22:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:22:22:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:22:22:setup_element:INFO: Scanning data phases
14:22:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:22:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:22:28:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:22:28:setup_element:INFO: Eye window for uplink 8 : _________________XXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 8
14:22:28:setup_element:INFO: Eye window for uplink 9 : _________________XXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 8
14:22:28:setup_element:INFO: Eye window for uplink 10: _____________________________XXXXXX_____
Data delay found: 11
14:22:28:setup_element:INFO: Eye window for uplink 11: _________________________________XXXXXX_
Data delay found: 15
14:22:28:setup_element:INFO: Eye window for uplink 12: _______________________________XXXXX____
Data delay found: 13
14:22:28:setup_element:INFO: Eye window for uplink 13: __________________________________XXXX__
Data delay found: 15
14:22:28:setup_element:INFO: Eye window for uplink 14: ________________________________XXXXX___
Data delay found: 14
14:22:28:setup_element:INFO: Eye window for uplink 15: _________________________________XXXXXX_
Data delay found: 15
14:22:28:setup_element:INFO: Setting the data phase to 8 for uplink 8
14:22:28:setup_element:INFO: Setting the data phase to 8 for uplink 9
14:22:28:setup_element:INFO: Setting the data phase to 11 for uplink 10
14:22:28:setup_element:INFO: Setting the data phase to 15 for uplink 11
14:22:28:setup_element:INFO: Setting the data phase to 13 for uplink 12
14:22:28:setup_element:INFO: Setting the data phase to 15 for uplink 13
14:22:28:setup_element:INFO: Setting the data phase to 14 for uplink 14
14:22:28:setup_element:INFO: Setting the data phase to 15 for uplink 15
14:22:28:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXX____
Uplink 9: _____________________________________________________________________XXXXXXX____
Uplink 10: _____________________________________________________________________XXXXXXX____
Uplink 11: _____________________________________________________________________XXXXXXX____
Uplink 12: ________________________________________________________________________________
Uplink 13: ________________________________________________________________________________
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 8:
Optimal Phase: 8
Window Length: 17
Eye Window: _________________XXXXXXXXXXXXXXXXXXXXXXX
Uplink 9:
Optimal Phase: 8
Window Length: 17
Eye Window: _________________XXXXXXXXXXXXXXXXXXXXXXX
Uplink 10:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 12:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 13:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 14:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 15:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
]
14:22:28:setup_element:INFO: Beginning SMX ASICs map scan
14:22:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:22:28:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:22:28:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:22:28:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:22:28:uplink:INFO: Setting uplinks mask [8, 9, 10, 11, 12, 13, 14, 15]
14:22:28:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:22:28:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:22:28:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:22:28:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:22:29:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:22:29:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:22:29:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:22:29:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:22:30:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXX____
Uplink 9: _____________________________________________________________________XXXXXXX____
Uplink 10: _____________________________________________________________________XXXXXXX____
Uplink 11: _____________________________________________________________________XXXXXXX____
Uplink 12: ________________________________________________________________________________
Uplink 13: ________________________________________________________________________________
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 8:
Optimal Phase: 8
Window Length: 17
Eye Window: _________________XXXXXXXXXXXXXXXXXXXXXXX
Uplink 9:
Optimal Phase: 8
Window Length: 17
Eye Window: _________________XXXXXXXXXXXXXXXXXXXXXXX
Uplink 10:
Optimal Phase: 11
Window Length: 34
Eye Window: _____________________________XXXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
Uplink 12:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 13:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 14:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 15:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
14:22:30:setup_element:INFO: Performing Elink synchronization
14:22:30:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:22:30:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:22:30:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:22:30:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:22:30:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:22:30:uplink:INFO: Enabling uplinks [8, 9, 10, 11, 12, 13, 14, 15]
14:22:31:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
14:22:31:smx_tester:INFO: Scanning setup
14:22:31:elinks:INFO: Disabling clock on downlink 0
14:22:31:elinks:INFO: Disabling clock on downlink 1
14:22:31:elinks:INFO: Disabling clock on downlink 2
14:22:31:elinks:INFO: Disabling clock on downlink 3
14:22:31:elinks:INFO: Disabling clock on downlink 4
14:22:31:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:22:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:22:31:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:22:31:elinks:INFO: Disabling clock on downlink 0
14:22:31:elinks:INFO: Disabling clock on downlink 1
14:22:31:elinks:INFO: Disabling clock on downlink 2
14:22:31:elinks:INFO: Disabling clock on downlink 3
14:22:31:elinks:INFO: Disabling clock on downlink 4
14:22:31:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:22:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:22:31:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
14:22:31:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
14:22:31:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
14:22:31:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
14:22:31:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
14:22:31:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
14:22:31:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
14:22:31:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
14:22:31:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:22:31:elinks:INFO: Disabling clock on downlink 0
14:22:31:elinks:INFO: Disabling clock on downlink 1
14:22:31:elinks:INFO: Disabling clock on downlink 2
14:22:31:elinks:INFO: Disabling clock on downlink 3
14:22:31:elinks:INFO: Disabling clock on downlink 4
14:22:31:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:22:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:22:31:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:22:31:elinks:INFO: Disabling clock on downlink 0
14:22:31:elinks:INFO: Disabling clock on downlink 1
14:22:31:elinks:INFO: Disabling clock on downlink 2
14:22:31:elinks:INFO: Disabling clock on downlink 3
14:22:31:elinks:INFO: Disabling clock on downlink 4
14:22:31:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:22:31:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:22:32:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:22:32:elinks:INFO: Disabling clock on downlink 0
14:22:32:elinks:INFO: Disabling clock on downlink 1
14:22:32:elinks:INFO: Disabling clock on downlink 2
14:22:32:elinks:INFO: Disabling clock on downlink 3
14:22:32:elinks:INFO: Disabling clock on downlink 4
14:22:32:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:22:32:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:22:32:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:22:32:setup_element:INFO: Scanning clock phase
14:22:32:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:22:32:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:22:32:setup_element:INFO: Clock phase scan results for group 0, downlink 1
14:22:32:setup_element:INFO: Eye window for uplink 8 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:22:32:setup_element:INFO: Eye window for uplink 9 : _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:22:32:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:22:32:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:22:32:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:22:32:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
14:22:32:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:22:32:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
14:22:32:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
14:22:32:setup_element:INFO: Scanning data phases
14:22:32:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:22:32:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:22:37:setup_element:INFO: Data phase scan results for group 0, downlink 1
14:22:37:setup_element:INFO: Eye window for uplink 8 : __________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 4
14:22:37:setup_element:INFO: Eye window for uplink 9 : __________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 4
14:22:37:setup_element:INFO: Eye window for uplink 10: ______________________________XXXXX_____
Data delay found: 12
14:22:37:setup_element:INFO: Eye window for uplink 11: __________________________________XXXX__
Data delay found: 15
14:22:37:setup_element:INFO: Eye window for uplink 12: _______________________________XXXXX____
Data delay found: 13
14:22:37:setup_element:INFO: Eye window for uplink 13: __________________________________XXXXX_
Data delay found: 16
14:22:37:setup_element:INFO: Eye window for uplink 14: ________________________________XXXXX___
Data delay found: 14
14:22:37:setup_element:INFO: Eye window for uplink 15: _________________________________XXXXXX_
Data delay found: 15
14:22:37:setup_element:INFO: Setting the data phase to 4 for uplink 8
14:22:37:setup_element:INFO: Setting the data phase to 4 for uplink 9
14:22:37:setup_element:INFO: Setting the data phase to 12 for uplink 10
14:22:37:setup_element:INFO: Setting the data phase to 15 for uplink 11
14:22:37:setup_element:INFO: Setting the data phase to 13 for uplink 12
14:22:37:setup_element:INFO: Setting the data phase to 16 for uplink 13
14:22:37:setup_element:INFO: Setting the data phase to 14 for uplink 14
14:22:37:setup_element:INFO: Setting the data phase to 15 for uplink 15
14:22:37:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXX____
Uplink 11: _____________________________________________________________________XXXXXXX____
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 8:
Optimal Phase: 4
Window Length: 10
Eye Window: __________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 9:
Optimal Phase: 4
Window Length: 10
Eye Window: __________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 10:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 12:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 13:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 14:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 15:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
]
14:22:37:setup_element:INFO: Beginning SMX ASICs map scan
14:22:37:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:22:37:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:22:37:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:22:37:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:22:37:uplink:INFO: Setting uplinks mask [8, 9, 10, 11, 12, 13, 14, 15]
14:22:37:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
14:22:37:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
14:22:38:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
14:22:38:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
14:22:38:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
14:22:38:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
14:22:38:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
14:22:38:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
14:22:39:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 8: _____________________________________________________________________XXXXXXXX___
Uplink 9: _____________________________________________________________________XXXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXX____
Uplink 11: _____________________________________________________________________XXXXXXX____
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXX__
Uplink 15: _______________________________________________________________________XXXXXXX__
Data phase characteristics:
Uplink 8:
Optimal Phase: 4
Window Length: 10
Eye Window: __________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 9:
Optimal Phase: 4
Window Length: 10
Eye Window: __________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 10:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 11:
Optimal Phase: 15
Window Length: 36
Eye Window: __________________________________XXXX__
Uplink 12:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 13:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 14:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 15:
Optimal Phase: 15
Window Length: 34
Eye Window: _________________________________XXXXXX_
14:22:39:setup_element:INFO: Performing Elink synchronization
14:22:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:22:39:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
14:22:39:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
14:22:39:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
14:22:39:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
14:22:39:uplink:INFO: Enabling uplinks [8, 9, 10, 11, 12, 13, 14, 15]
14:22:40:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
14:22:41:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:22:41:febtest:INFO: 08-01 | XA-000-08-002-000-004-025-15 | 40.9 | 1153.7
14:22:41:febtest:INFO: 10-03 | XA-000-08-002-000-004-026-15 | 28.2 | 1206.9
14:22:41:febtest:INFO: 12-05 | XA-000-08-002-000-004-027-15 | 31.4 | 1206.9
14:22:41:febtest:INFO: 14-07 | XA-000-08-002-000-004-030-15 | 50.4 | 1130.0
14:22:41:ST3_smx:INFO: Configuring SMX FAST
14:22:43:ST3_smx:INFO: chip: 8-1 37.726682 C 1177.390875 mV
14:22:43:ST3_smx:INFO: Electrons
14:22:43:ST3_smx:INFO: # loops 0
14:22:45:ST3_smx:INFO: # loops 1
14:22:47:ST3_smx:INFO: # loops 2
14:22:48:ST3_smx:INFO: Total # of broken channels: 0
14:22:48:ST3_smx:INFO: List of broken channels: []
14:22:48:ST3_smx:INFO: Total # of broken channels: 0
14:22:48:ST3_smx:INFO: List of broken channels: []
14:22:49:ST3_smx:INFO: Configuring SMX FAST
14:22:51:ST3_smx:INFO: chip: 10-3 34.556970 C 1195.082160 mV
14:22:51:ST3_smx:INFO: Electrons
14:22:51:ST3_smx:INFO: # loops 0
14:22:53:ST3_smx:INFO: # loops 1
14:22:55:ST3_smx:INFO: # loops 2
14:22:56:ST3_smx:INFO: Total # of broken channels: 0
14:22:56:ST3_smx:INFO: List of broken channels: []
14:22:56:ST3_smx:INFO: Total # of broken channels: 0
14:22:56:ST3_smx:INFO: List of broken channels: []
14:22:57:ST3_smx:INFO: Configuring SMX FAST
14:22:59:ST3_smx:INFO: chip: 12-5 37.726682 C 1189.190035 mV
14:22:59:ST3_smx:INFO: Electrons
14:22:59:ST3_smx:INFO: # loops 0
14:23:01:ST3_smx:INFO: # loops 1
14:23:03:ST3_smx:INFO: # loops 2
14:23:04:ST3_smx:INFO: Total # of broken channels: 0
14:23:04:ST3_smx:INFO: List of broken channels: []
14:23:04:ST3_smx:INFO: Total # of broken channels: 0
14:23:04:ST3_smx:INFO: List of broken channels: []
14:23:05:ST3_smx:INFO: Configuring SMX FAST
14:23:07:ST3_smx:INFO: chip: 14-7 47.250730 C 1147.806000 mV
14:23:07:ST3_smx:INFO: Electrons
14:23:07:ST3_smx:INFO: # loops 0
14:23:09:ST3_smx:INFO: # loops 1
14:23:11:ST3_smx:INFO: # loops 2
14:23:12:ST3_smx:INFO: Total # of broken channels: 0
14:23:12:ST3_smx:INFO: List of broken channels: []
14:23:12:ST3_smx:INFO: Total # of broken channels: 0
14:23:12:ST3_smx:INFO: List of broken channels: []
14:23:13:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:23:13:febtest:INFO: 08-01 | XA-000-08-002-000-004-025-15 | 37.7 | 1177.4
14:23:14:febtest:INFO: 10-03 | XA-000-08-002-000-004-026-15 | 34.6 | 1195.1
14:23:14:febtest:INFO: 12-05 | XA-000-08-002-000-004-027-15 | 37.7 | 1189.2
14:23:14:febtest:INFO: 14-07 | XA-000-08-002-000-004-030-15 | 47.3 | 1147.8
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_27-14_22_18
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 1120
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
---------------------------------------
VI_before_Init : ['2.452', '0.9900', '1.850', '1.4590', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '1.0130', '1.850', '0.3992', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '1.0090', '1.850', '0.1651', '0.000', '0.0000', '0.000', '0.0000']
14:23:27:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:30:43:febtest:INFO: FEB type: 8.2
14:30:43:febtest:INFO: FEB SN: 2113
14:30:49:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:30:49:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:30:49:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:30:50:febtest:INFO: Testing FEB with SN 2113
14:30:52:smx_tester:INFO: Scanning setup
14:30:52:elinks:INFO: Disabling clock on downlink 0
14:30:52:elinks:INFO: Disabling clock on downlink 1
14:30:52:elinks:INFO: Disabling clock on downlink 2
14:30:52:elinks:INFO: Disabling clock on downlink 3
14:30:52:elinks:INFO: Disabling clock on downlink 4
14:30:52:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:30:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:30:52:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:30:52:elinks:INFO: Disabling clock on downlink 0
14:30:52:elinks:INFO: Disabling clock on downlink 1
14:30:52:elinks:INFO: Disabling clock on downlink 2
14:30:52:elinks:INFO: Disabling clock on downlink 3
14:30:52:elinks:INFO: Disabling clock on downlink 4
14:30:52:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:30:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:30:52:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:30:52:elinks:INFO: Disabling clock on downlink 0
14:30:52:elinks:INFO: Disabling clock on downlink 1
14:30:52:elinks:INFO: Disabling clock on downlink 2
14:30:52:elinks:INFO: Disabling clock on downlink 3
14:30:52:elinks:INFO: Disabling clock on downlink 4
14:30:53:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:30:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:30:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:30:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:30:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:30:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:30:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:30:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:30:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:30:53:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:30:53:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:30:53:elinks:INFO: Disabling clock on downlink 0
14:30:53:elinks:INFO: Disabling clock on downlink 1
14:30:53:elinks:INFO: Disabling clock on downlink 2
14:30:53:elinks:INFO: Disabling clock on downlink 3
14:30:53:elinks:INFO: Disabling clock on downlink 4
14:30:53:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:30:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:30:53:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:30:53:elinks:INFO: Disabling clock on downlink 0
14:30:53:elinks:INFO: Disabling clock on downlink 1
14:30:53:elinks:INFO: Disabling clock on downlink 2
14:30:53:elinks:INFO: Disabling clock on downlink 3
14:30:53:elinks:INFO: Disabling clock on downlink 4
14:30:53:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:30:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:30:53:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:30:53:setup_element:INFO: Scanning clock phase
14:30:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:30:53:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:30:53:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:30:53:setup_element:INFO: Eye window for uplink 24: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:30:53:setup_element:INFO: Eye window for uplink 25: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:30:53:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:30:53:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:30:53:setup_element:INFO: Eye window for uplink 28: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:30:53:setup_element:INFO: Eye window for uplink 29: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:30:53:setup_element:INFO: Eye window for uplink 30: ________________________________________________________________________________
Clock Delay: 40
14:30:53:setup_element:INFO: Eye window for uplink 31: ________________________________________________________________________________
Clock Delay: 40
14:30:53:setup_element:INFO: Setting the clock phase to 32 for group 0, downlink 2
14:30:53:setup_element:INFO: Scanning data phases
14:30:53:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:30:54:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:30:59:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:30:59:setup_element:INFO: Eye window for uplink 24: _____XXXXX______________________________
Data delay found: 27
14:30:59:setup_element:INFO: Eye window for uplink 25: ________XXXXX___________________________
Data delay found: 30
14:30:59:setup_element:INFO: Eye window for uplink 26: ______XXXXX_____________________________
Data delay found: 28
14:30:59:setup_element:INFO: Eye window for uplink 27: _________XXXXXX_________________________
Data delay found: 31
14:30:59:setup_element:INFO: Eye window for uplink 28: __________XXXXXX________________________
Data delay found: 32
14:30:59:setup_element:INFO: Eye window for uplink 29: ____________XXXXXX______________________
Data delay found: 34
14:30:59:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
14:30:59:setup_element:INFO: Eye window for uplink 31: _____________XXXXX______________________
Data delay found: 35
14:30:59:setup_element:INFO: Setting the data phase to 27 for uplink 24
14:30:59:setup_element:INFO: Setting the data phase to 30 for uplink 25
14:30:59:setup_element:INFO: Setting the data phase to 28 for uplink 26
14:30:59:setup_element:INFO: Setting the data phase to 31 for uplink 27
14:30:59:setup_element:INFO: Setting the data phase to 32 for uplink 28
14:30:59:setup_element:INFO: Setting the data phase to 34 for uplink 29
14:30:59:setup_element:INFO: Setting the data phase to 36 for uplink 30
14:30:59:setup_element:INFO: Setting the data phase to 35 for uplink 31
14:30:59:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 72
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _____________________________________________________________________XXXXXXXX___
Uplink 29: _____________________________________________________________________XXXXXXXX___
Uplink 30: ________________________________________________________________________________
Uplink 31: ________________________________________________________________________________
Data phase characteristics:
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 28:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
]
14:30:59:setup_element:INFO: Beginning SMX ASICs map scan
14:30:59:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:30:59:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:30:59:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:30:59:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:30:59:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
14:30:59:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:30:59:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:30:59:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:30:59:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:31:00:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:31:00:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:31:00:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:31:00:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:31:02:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 72
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _____________________________________________________________________XXXXXXXX___
Uplink 29: _____________________________________________________________________XXXXXXXX___
Uplink 30: ________________________________________________________________________________
Uplink 31: ________________________________________________________________________________
Data phase characteristics:
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 28:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
14:31:02:setup_element:INFO: Performing Elink synchronization
14:31:02:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:02:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:02:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:31:02:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:31:02:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:31:02:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
14:31:02:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
14:31:02:smx_tester:INFO: Scanning setup
14:31:02:elinks:INFO: Disabling clock on downlink 0
14:31:02:elinks:INFO: Disabling clock on downlink 1
14:31:02:elinks:INFO: Disabling clock on downlink 2
14:31:02:elinks:INFO: Disabling clock on downlink 3
14:31:02:elinks:INFO: Disabling clock on downlink 4
14:31:02:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:02:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:31:02:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:02:elinks:INFO: Disabling clock on downlink 0
14:31:02:elinks:INFO: Disabling clock on downlink 1
14:31:02:elinks:INFO: Disabling clock on downlink 2
14:31:02:elinks:INFO: Disabling clock on downlink 3
14:31:02:elinks:INFO: Disabling clock on downlink 4
14:31:02:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:02:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:31:02:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:02:elinks:INFO: Disabling clock on downlink 0
14:31:02:elinks:INFO: Disabling clock on downlink 1
14:31:02:elinks:INFO: Disabling clock on downlink 2
14:31:02:elinks:INFO: Disabling clock on downlink 3
14:31:02:elinks:INFO: Disabling clock on downlink 4
14:31:02:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:02:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:03:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:31:03:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:31:03:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:31:03:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:31:03:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:31:03:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:31:03:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:31:03:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:31:03:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:03:elinks:INFO: Disabling clock on downlink 0
14:31:03:elinks:INFO: Disabling clock on downlink 1
14:31:03:elinks:INFO: Disabling clock on downlink 2
14:31:03:elinks:INFO: Disabling clock on downlink 3
14:31:03:elinks:INFO: Disabling clock on downlink 4
14:31:03:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:03:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:31:03:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:03:elinks:INFO: Disabling clock on downlink 0
14:31:03:elinks:INFO: Disabling clock on downlink 1
14:31:03:elinks:INFO: Disabling clock on downlink 2
14:31:03:elinks:INFO: Disabling clock on downlink 3
14:31:03:elinks:INFO: Disabling clock on downlink 4
14:31:03:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:03:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:31:03:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:03:setup_element:INFO: Scanning clock phase
14:31:03:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:03:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:03:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:31:03:setup_element:INFO: Eye window for uplink 24: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:03:setup_element:INFO: Eye window for uplink 25: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:03:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:03:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:03:setup_element:INFO: Eye window for uplink 28: ________________________________________________________________________________
Clock Delay: 40
14:31:03:setup_element:INFO: Eye window for uplink 29: ________________________________________________________________________________
Clock Delay: 40
14:31:03:setup_element:INFO: Eye window for uplink 30: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:31:03:setup_element:INFO: Eye window for uplink 31: _____________________________________________________________________XXXXXXX____
Clock Delay: 32
14:31:03:setup_element:INFO: Setting the clock phase to 32 for group 0, downlink 2
14:31:03:setup_element:INFO: Scanning data phases
14:31:03:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:04:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:09:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:31:09:setup_element:INFO: Eye window for uplink 24: _____XXXXX_________________XXXXXXXXXXXXX
Data delay found: 18
14:31:09:setup_element:INFO: Eye window for uplink 25: ________XXXXX______________XXXXXXXXXXXXX
Data delay found: 19
14:31:09:setup_element:INFO: Eye window for uplink 26: ______XXXXX_____________________________
Data delay found: 28
14:31:09:setup_element:INFO: Eye window for uplink 27: _________XXXXXX_________________________
Data delay found: 31
14:31:09:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
14:31:09:setup_element:INFO: Eye window for uplink 29: ____________XXXXXX______________________
Data delay found: 34
14:31:09:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
14:31:09:setup_element:INFO: Eye window for uplink 31: _____________XXXXX______________________
Data delay found: 35
14:31:09:setup_element:INFO: Setting the data phase to 18 for uplink 24
14:31:09:setup_element:INFO: Setting the data phase to 19 for uplink 25
14:31:09:setup_element:INFO: Setting the data phase to 28 for uplink 26
14:31:09:setup_element:INFO: Setting the data phase to 31 for uplink 27
14:31:09:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:31:09:setup_element:INFO: Setting the data phase to 34 for uplink 29
14:31:09:setup_element:INFO: Setting the data phase to 36 for uplink 30
14:31:09:setup_element:INFO: Setting the data phase to 35 for uplink 31
14:31:09:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 72
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: ________________________________________________________________________________
Uplink 29: ________________________________________________________________________________
Uplink 30: _____________________________________________________________________XXXXXXX____
Uplink 31: _____________________________________________________________________XXXXXXX____
Data phase characteristics:
Uplink 24:
Optimal Phase: 18
Window Length: 17
Eye Window: _____XXXXX_________________XXXXXXXXXXXXX
Uplink 25:
Optimal Phase: 19
Window Length: 14
Eye Window: ________XXXXX______________XXXXXXXXXXXXX
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
]
14:31:09:setup_element:INFO: Beginning SMX ASICs map scan
14:31:09:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:09:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:09:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:31:09:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:31:09:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
14:31:09:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:31:09:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:31:09:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:31:09:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:31:10:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:31:10:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:31:10:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:31:10:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:31:12:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 72
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: ________________________________________________________________________________
Uplink 29: ________________________________________________________________________________
Uplink 30: _____________________________________________________________________XXXXXXX____
Uplink 31: _____________________________________________________________________XXXXXXX____
Data phase characteristics:
Uplink 24:
Optimal Phase: 18
Window Length: 17
Eye Window: _____XXXXX_________________XXXXXXXXXXXXX
Uplink 25:
Optimal Phase: 19
Window Length: 14
Eye Window: ________XXXXX______________XXXXXXXXXXXXX
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 34
Eye Window: _________XXXXXX_________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
14:31:12:setup_element:INFO: Performing Elink synchronization
14:31:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:12:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:12:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:31:12:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:31:12:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:31:12:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
14:31:12:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:31:13:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:31:13:febtest:INFO: 30-01 | XA-000-08-002-000-005-011-05 | 37.7 | 1183.3
14:31:13:febtest:INFO: 28-03 | XA-000-08-002-000-000-254-08 | 34.6 | 1189.2
14:31:13:febtest:INFO: 26-05 | XA-000-08-002-000-000-255-08 | 50.4 | 1147.8
14:31:14:febtest:INFO: 24-07 | XA-000-08-002-000-003-175-04 | 37.7 | 1183.3
14:31:14:ST3_smx:INFO: Configuring SMX FAST
14:31:16:ST3_smx:INFO: chip: 30-1 40.898880 C 1171.483840 mV
14:31:16:ST3_smx:INFO: Electrons
14:31:16:ST3_smx:INFO: # loops 0
14:31:17:ST3_smx:INFO: # loops 1
14:31:19:ST3_smx:INFO: # loops 2
Traceback (most recent call last):
File "febtest.py", line 385, in DoFEB_MicrocableTest
self.EMU.mysmx[i].MicroCableTest()
File "/home/cbm/ST3_v2.29.14/lib/ST3_smx.py", line 605, in MicroCableTest
self.hEl.DrawAllHisto(self.cDist.GetPad(1), self.cDist.GetPad(2))
File "/home/cbm/ST3_v2.29.14/lib/ST3_discr_histo.py", line 225, in DrawAllHisto
pad1.cd()
ReferenceError: attempt to access a null-pointer
14:31:25:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:31:25:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:31:25:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:31:26:febtest:INFO: Testing FEB with SN 2113
14:31:28:smx_tester:INFO: Scanning setup
14:31:28:elinks:INFO: Disabling clock on downlink 0
14:31:28:elinks:INFO: Disabling clock on downlink 1
14:31:28:elinks:INFO: Disabling clock on downlink 2
14:31:28:elinks:INFO: Disabling clock on downlink 3
14:31:28:elinks:INFO: Disabling clock on downlink 4
14:31:28:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:28:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:31:28:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:29:elinks:INFO: Disabling clock on downlink 0
14:31:29:elinks:INFO: Disabling clock on downlink 1
14:31:29:elinks:INFO: Disabling clock on downlink 2
14:31:29:elinks:INFO: Disabling clock on downlink 3
14:31:29:elinks:INFO: Disabling clock on downlink 4
14:31:29:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:31:29:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:29:elinks:INFO: Disabling clock on downlink 0
14:31:29:elinks:INFO: Disabling clock on downlink 1
14:31:29:elinks:INFO: Disabling clock on downlink 2
14:31:29:elinks:INFO: Disabling clock on downlink 3
14:31:29:elinks:INFO: Disabling clock on downlink 4
14:31:29:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:29:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:31:29:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:31:29:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:31:29:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:31:29:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:31:29:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:31:29:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:31:29:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:31:29:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:29:elinks:INFO: Disabling clock on downlink 0
14:31:29:elinks:INFO: Disabling clock on downlink 1
14:31:29:elinks:INFO: Disabling clock on downlink 2
14:31:29:elinks:INFO: Disabling clock on downlink 3
14:31:29:elinks:INFO: Disabling clock on downlink 4
14:31:29:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:31:29:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:29:elinks:INFO: Disabling clock on downlink 0
14:31:29:elinks:INFO: Disabling clock on downlink 1
14:31:29:elinks:INFO: Disabling clock on downlink 2
14:31:29:elinks:INFO: Disabling clock on downlink 3
14:31:29:elinks:INFO: Disabling clock on downlink 4
14:31:29:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:31:29:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:29:setup_element:INFO: Scanning clock phase
14:31:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:29:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:30:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:31:30:setup_element:INFO: Eye window for uplink 24: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:30:setup_element:INFO: Eye window for uplink 25: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:30:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:31:30:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:31:30:setup_element:INFO: Eye window for uplink 28: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:30:setup_element:INFO: Eye window for uplink 29: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:30:setup_element:INFO: Eye window for uplink 30: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:30:setup_element:INFO: Eye window for uplink 31: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:30:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
14:31:30:setup_element:INFO: Scanning data phases
14:31:30:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:30:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:35:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:31:35:setup_element:INFO: Eye window for uplink 24: ____XXXXX_______________________________
Data delay found: 26
14:31:35:setup_element:INFO: Eye window for uplink 25: _______XXXXX____________________________
Data delay found: 29
14:31:35:setup_element:INFO: Eye window for uplink 26: _____XXXXX______________________________
Data delay found: 27
14:31:35:setup_element:INFO: Eye window for uplink 27: ________XXXXXX__________________________
Data delay found: 30
14:31:35:setup_element:INFO: Eye window for uplink 28: __________XXXXX_________________________
Data delay found: 32
14:31:35:setup_element:INFO: Eye window for uplink 29: ___________XXXXX________________________
Data delay found: 33
14:31:35:setup_element:INFO: Eye window for uplink 30: ____________XXXXXXX_____________________
Data delay found: 35
14:31:35:setup_element:INFO: Eye window for uplink 31: ___________XXXXXX_______________________
Data delay found: 33
14:31:35:setup_element:INFO: Setting the data phase to 26 for uplink 24
14:31:35:setup_element:INFO: Setting the data phase to 29 for uplink 25
14:31:35:setup_element:INFO: Setting the data phase to 27 for uplink 26
14:31:35:setup_element:INFO: Setting the data phase to 30 for uplink 27
14:31:35:setup_element:INFO: Setting the data phase to 32 for uplink 28
14:31:35:setup_element:INFO: Setting the data phase to 33 for uplink 29
14:31:35:setup_element:INFO: Setting the data phase to 35 for uplink 30
14:31:35:setup_element:INFO: Setting the data phase to 33 for uplink 31
14:31:35:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXXX__
Uplink 27: _____________________________________________________________________XXXXXXXXX__
Uplink 28: _____________________________________________________________________XXXXXXXX___
Uplink 29: _____________________________________________________________________XXXXXXXX___
Uplink 30: _____________________________________________________________________XXXXXXXX___
Uplink 31: _____________________________________________________________________XXXXXXXX___
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 27:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 28:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 30:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 31:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
]
14:31:35:setup_element:INFO: Beginning SMX ASICs map scan
14:31:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:35:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:35:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:31:35:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:31:35:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
14:31:35:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:31:35:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:31:36:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:31:36:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:31:36:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:31:36:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:31:36:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:31:36:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:31:38:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXXX__
Uplink 27: _____________________________________________________________________XXXXXXXXX__
Uplink 28: _____________________________________________________________________XXXXXXXX___
Uplink 29: _____________________________________________________________________XXXXXXXX___
Uplink 30: _____________________________________________________________________XXXXXXXX___
Uplink 31: _____________________________________________________________________XXXXXXXX___
Data phase characteristics:
Uplink 24:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 26:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 27:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 28:
Optimal Phase: 32
Window Length: 35
Eye Window: __________XXXXX_________________________
Uplink 29:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 30:
Optimal Phase: 35
Window Length: 33
Eye Window: ____________XXXXXXX_____________________
Uplink 31:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
14:31:38:setup_element:INFO: Performing Elink synchronization
14:31:38:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:38:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:38:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:31:38:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:31:38:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:31:38:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
14:31:38:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
14:31:38:smx_tester:INFO: Scanning setup
14:31:38:elinks:INFO: Disabling clock on downlink 0
14:31:38:elinks:INFO: Disabling clock on downlink 1
14:31:38:elinks:INFO: Disabling clock on downlink 2
14:31:38:elinks:INFO: Disabling clock on downlink 3
14:31:38:elinks:INFO: Disabling clock on downlink 4
14:31:38:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:38:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:31:38:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:39:elinks:INFO: Disabling clock on downlink 0
14:31:39:elinks:INFO: Disabling clock on downlink 1
14:31:39:elinks:INFO: Disabling clock on downlink 2
14:31:39:elinks:INFO: Disabling clock on downlink 3
14:31:39:elinks:INFO: Disabling clock on downlink 4
14:31:39:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:31:39:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:39:elinks:INFO: Disabling clock on downlink 0
14:31:39:elinks:INFO: Disabling clock on downlink 1
14:31:39:elinks:INFO: Disabling clock on downlink 2
14:31:39:elinks:INFO: Disabling clock on downlink 3
14:31:39:elinks:INFO: Disabling clock on downlink 4
14:31:39:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:31:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:31:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:31:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:31:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:31:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:31:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:31:39:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:31:39:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:39:elinks:INFO: Disabling clock on downlink 0
14:31:39:elinks:INFO: Disabling clock on downlink 1
14:31:39:elinks:INFO: Disabling clock on downlink 2
14:31:39:elinks:INFO: Disabling clock on downlink 3
14:31:39:elinks:INFO: Disabling clock on downlink 4
14:31:39:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:31:39:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:39:elinks:INFO: Disabling clock on downlink 0
14:31:39:elinks:INFO: Disabling clock on downlink 1
14:31:39:elinks:INFO: Disabling clock on downlink 2
14:31:39:elinks:INFO: Disabling clock on downlink 3
14:31:39:elinks:INFO: Disabling clock on downlink 4
14:31:39:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:31:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:31:39:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:31:39:setup_element:INFO: Scanning clock phase
14:31:39:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:39:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:40:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:31:40:setup_element:INFO: Eye window for uplink 24: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:40:setup_element:INFO: Eye window for uplink 25: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:40:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:40:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:40:setup_element:INFO: Eye window for uplink 28: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:40:setup_element:INFO: Eye window for uplink 29: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:40:setup_element:INFO: Eye window for uplink 30: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:40:setup_element:INFO: Eye window for uplink 31: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:31:40:setup_element:INFO: Setting the clock phase to 32 for group 0, downlink 2
14:31:40:setup_element:INFO: Scanning data phases
14:31:40:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:40:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:45:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:31:45:setup_element:INFO: Eye window for uplink 24: ______XXXXX_____________________________
Data delay found: 28
14:31:45:setup_element:INFO: Eye window for uplink 25: _________XXXXX__________________________
Data delay found: 31
14:31:45:setup_element:INFO: Eye window for uplink 26: _______XXXXX____________________________
Data delay found: 29
14:31:45:setup_element:INFO: Eye window for uplink 27: __________XXXXXX________________________
Data delay found: 32
14:31:45:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
14:31:45:setup_element:INFO: Eye window for uplink 29: _____________XXXX_______________________
Data delay found: 34
14:31:45:setup_element:INFO: Eye window for uplink 30: ________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 3
14:31:45:setup_element:INFO: Eye window for uplink 31: ________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Data delay found: 3
14:31:45:setup_element:INFO: Setting the data phase to 28 for uplink 24
14:31:45:setup_element:INFO: Setting the data phase to 31 for uplink 25
14:31:45:setup_element:INFO: Setting the data phase to 29 for uplink 26
14:31:45:setup_element:INFO: Setting the data phase to 32 for uplink 27
14:31:45:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:31:45:setup_element:INFO: Setting the data phase to 34 for uplink 29
14:31:45:setup_element:INFO: Setting the data phase to 3 for uplink 30
14:31:45:setup_element:INFO: Setting the data phase to 3 for uplink 31
14:31:45:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 72
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _____________________________________________________________________XXXXXXXX___
Uplink 29: _____________________________________________________________________XXXXXXXX___
Uplink 30: _____________________________________________________________________XXXXXXXX___
Uplink 31: _____________________________________________________________________XXXXXXXX___
Data phase characteristics:
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 36
Eye Window: _____________XXXX_______________________
Uplink 30:
Optimal Phase: 3
Window Length: 8
Eye Window: ________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 31:
Optimal Phase: 3
Window Length: 8
Eye Window: ________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
]
14:31:45:setup_element:INFO: Beginning SMX ASICs map scan
14:31:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:45:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:45:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:31:45:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:31:45:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
14:31:46:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:31:46:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:31:46:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:31:46:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:31:46:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:31:46:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:31:47:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:31:47:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:31:48:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 72
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _____________________________________________________________________XXXXXXXX___
Uplink 29: _____________________________________________________________________XXXXXXXX___
Uplink 30: _____________________________________________________________________XXXXXXXX___
Uplink 31: _____________________________________________________________________XXXXXXXX___
Data phase characteristics:
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 27:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 36
Eye Window: _____________XXXX_______________________
Uplink 30:
Optimal Phase: 3
Window Length: 8
Eye Window: ________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Uplink 31:
Optimal Phase: 3
Window Length: 8
Eye Window: ________XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
14:31:48:setup_element:INFO: Performing Elink synchronization
14:31:48:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:31:48:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:31:48:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:31:48:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:31:48:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:31:48:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
14:31:48:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:31:49:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:31:50:febtest:INFO: 30-01 | XA-000-08-002-000-005-011-05 | 40.9 | 1171.5
14:31:50:febtest:INFO: 28-03 | XA-000-08-002-000-000-254-08 | 34.6 | 1189.2
14:31:50:febtest:INFO: 26-05 | XA-000-08-002-000-000-255-08 | 50.4 | 1147.8
14:31:50:febtest:INFO: 24-07 | XA-000-08-002-000-003-175-04 | 37.7 | 1183.3
14:31:50:ST3_smx:INFO: Configuring SMX FAST
14:31:52:ST3_smx:INFO: chip: 30-1 40.898880 C 1171.483840 mV
14:31:52:ST3_smx:INFO: Electrons
14:31:52:ST3_smx:INFO: # loops 0
14:31:54:ST3_smx:INFO: # loops 1
14:31:55:ST3_smx:INFO: # loops 2
14:31:57:ST3_smx:INFO: Total # of broken channels: 0
14:31:57:ST3_smx:INFO: List of broken channels: []
14:31:57:ST3_smx:INFO: Total # of broken channels: 0
14:31:57:ST3_smx:INFO: List of broken channels: []
14:31:58:ST3_smx:INFO: Configuring SMX FAST
14:32:00:ST3_smx:INFO: chip: 28-3 47.250730 C 1147.806000 mV
14:32:00:ST3_smx:INFO: Electrons
14:32:00:ST3_smx:INFO: # loops 0
14:32:02:ST3_smx:INFO: # loops 1
14:32:03:ST3_smx:INFO: # loops 2
14:32:05:ST3_smx:INFO: Total # of broken channels: 0
14:32:05:ST3_smx:INFO: List of broken channels: []
14:32:05:ST3_smx:INFO: Total # of broken channels: 0
14:32:05:ST3_smx:INFO: List of broken channels: []
14:32:06:ST3_smx:INFO: Configuring SMX FAST
14:32:08:ST3_smx:INFO: chip: 26-5 47.250730 C 1159.654860 mV
14:32:08:ST3_smx:INFO: Electrons
14:32:08:ST3_smx:INFO: # loops 0
14:32:10:ST3_smx:INFO: # loops 1
14:32:11:ST3_smx:INFO: # loops 2
14:32:13:ST3_smx:INFO: Total # of broken channels: 0
14:32:13:ST3_smx:INFO: List of broken channels: []
14:32:13:ST3_smx:INFO: Total # of broken channels: 0
14:32:13:ST3_smx:INFO: List of broken channels: []
14:32:14:ST3_smx:INFO: Configuring SMX FAST
14:32:16:ST3_smx:INFO: chip: 24-7 34.556970 C 1195.082160 mV
14:32:16:ST3_smx:INFO: Electrons
14:32:16:ST3_smx:INFO: # loops 0
14:32:17:ST3_smx:INFO: # loops 1
14:32:19:ST3_smx:INFO: # loops 2
14:32:20:ST3_smx:INFO: Total # of broken channels: 0
14:32:20:ST3_smx:INFO: List of broken channels: []
14:32:20:ST3_smx:INFO: Total # of broken channels: 0
14:32:20:ST3_smx:INFO: List of broken channels: []
14:32:21:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:32:22:febtest:INFO: 30-01 | XA-000-08-002-000-005-011-05 | 40.9 | 1171.5
14:32:22:febtest:INFO: 28-03 | XA-000-08-002-000-000-254-08 | 47.3 | 1153.7
14:32:22:febtest:INFO: 26-05 | XA-000-08-002-000-000-255-08 | 47.3 | 1159.7
14:32:22:febtest:INFO: 24-07 | XA-000-08-002-000-003-175-04 | 34.6 | 1195.1
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_27-14_31_25
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2113
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9657', '1.850', '0.5046']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9906', '1.850', '0.2662']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9882', '1.850', '0.1636']
14:32:38:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
14:36:30:febtest:INFO: FEB type: 8.2
14:36:30:febtest:INFO: FEB SN: 2122
14:36:32:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:36:32:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
14:36:32:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
14:36:32:febtest:INFO: Testing FEB with SN 2122
14:36:35:smx_tester:INFO: Scanning setup
14:36:35:elinks:INFO: Disabling clock on downlink 0
14:36:35:elinks:INFO: Disabling clock on downlink 1
14:36:35:elinks:INFO: Disabling clock on downlink 2
14:36:35:elinks:INFO: Disabling clock on downlink 3
14:36:35:elinks:INFO: Disabling clock on downlink 4
14:36:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:36:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:35:elinks:INFO: Disabling clock on downlink 0
14:36:35:elinks:INFO: Disabling clock on downlink 1
14:36:35:elinks:INFO: Disabling clock on downlink 2
14:36:35:elinks:INFO: Disabling clock on downlink 3
14:36:35:elinks:INFO: Disabling clock on downlink 4
14:36:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:35:elinks:INFO: Disabling clock on downlink 0
14:36:35:elinks:INFO: Disabling clock on downlink 1
14:36:35:elinks:INFO: Disabling clock on downlink 2
14:36:35:elinks:INFO: Disabling clock on downlink 3
14:36:35:elinks:INFO: Disabling clock on downlink 4
14:36:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:36:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:36:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:36:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:36:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:36:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:36:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:36:36:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:36:36:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:36:elinks:INFO: Disabling clock on downlink 0
14:36:36:elinks:INFO: Disabling clock on downlink 1
14:36:36:elinks:INFO: Disabling clock on downlink 2
14:36:36:elinks:INFO: Disabling clock on downlink 3
14:36:36:elinks:INFO: Disabling clock on downlink 4
14:36:36:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:36:36:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:36:elinks:INFO: Disabling clock on downlink 0
14:36:36:elinks:INFO: Disabling clock on downlink 1
14:36:36:elinks:INFO: Disabling clock on downlink 2
14:36:36:elinks:INFO: Disabling clock on downlink 3
14:36:36:elinks:INFO: Disabling clock on downlink 4
14:36:36:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:36:36:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:36:setup_element:INFO: Scanning clock phase
14:36:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:36:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:36:36:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:36:36:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:36:36:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:36:36:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:36:36:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
14:36:36:setup_element:INFO: Eye window for uplink 28: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:36:36:setup_element:INFO: Eye window for uplink 29: ______________________________________________________________________XXXXXXX___
Clock Delay: 33
14:36:36:setup_element:INFO: Eye window for uplink 30: ______________________________________________________________________XXXXXX____
Clock Delay: 32
14:36:36:setup_element:INFO: Eye window for uplink 31: ______________________________________________________________________XXXXXX____
Clock Delay: 32
14:36:36:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
14:36:36:setup_element:INFO: Scanning data phases
14:36:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:36:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:36:41:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:36:42:setup_element:INFO: Eye window for uplink 24: _______XXXXXX___________________________
Data delay found: 29
14:36:42:setup_element:INFO: Eye window for uplink 25: __________XXXXXX________________________
Data delay found: 32
14:36:42:setup_element:INFO: Eye window for uplink 26: _____XXXXX______________________________
Data delay found: 27
14:36:42:setup_element:INFO: Eye window for uplink 27: ________XXXXXX__________________________
Data delay found: 30
14:36:42:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
14:36:42:setup_element:INFO: Eye window for uplink 29: ____________XXXXXX______________________
Data delay found: 34
14:36:42:setup_element:INFO: Eye window for uplink 30: ______________XXXXX_____________________
Data delay found: 36
14:36:42:setup_element:INFO: Eye window for uplink 31: ____________XXXXXX______________________
Data delay found: 34
14:36:42:setup_element:INFO: Setting the data phase to 29 for uplink 24
14:36:42:setup_element:INFO: Setting the data phase to 32 for uplink 25
14:36:42:setup_element:INFO: Setting the data phase to 27 for uplink 26
14:36:42:setup_element:INFO: Setting the data phase to 30 for uplink 27
14:36:42:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:36:42:setup_element:INFO: Setting the data phase to 34 for uplink 29
14:36:42:setup_element:INFO: Setting the data phase to 36 for uplink 30
14:36:42:setup_element:INFO: Setting the data phase to 34 for uplink 31
14:36:42:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _____________________________________________________________________XXXXXXXXX__
Uplink 27: _____________________________________________________________________XXXXXXXXX__
Uplink 28: ______________________________________________________________________XXXXXXX___
Uplink 29: ______________________________________________________________________XXXXXXX___
Uplink 30: ______________________________________________________________________XXXXXX____
Uplink 31: ______________________________________________________________________XXXXXX____
Data phase characteristics:
Uplink 24:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 25:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 26:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 27:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 35
Eye Window: ______________XXXXX_____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
]
14:36:42:setup_element:INFO: Beginning SMX ASICs map scan
14:36:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:42:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:36:42:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:36:42:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:36:42:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
14:36:42:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:36:42:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:36:42:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:36:42:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:36:43:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:36:43:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:36:43:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:36:43:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:36:44:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _____________________________________________________________________XXXXXXXXX__
Uplink 27: _____________________________________________________________________XXXXXXXXX__
Uplink 28: ______________________________________________________________________XXXXXXX___
Uplink 29: ______________________________________________________________________XXXXXXX___
Uplink 30: ______________________________________________________________________XXXXXX____
Uplink 31: ______________________________________________________________________XXXXXX____
Data phase characteristics:
Uplink 24:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 25:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 26:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 27:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 35
Eye Window: ______________XXXXX_____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
14:36:44:setup_element:INFO: Performing Elink synchronization
14:36:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:44:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:36:44:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:36:44:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:36:44:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:36:44:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
14:36:44:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
14:36:45:smx_tester:INFO: Scanning setup
14:36:45:elinks:INFO: Disabling clock on downlink 0
14:36:45:elinks:INFO: Disabling clock on downlink 1
14:36:45:elinks:INFO: Disabling clock on downlink 2
14:36:45:elinks:INFO: Disabling clock on downlink 3
14:36:45:elinks:INFO: Disabling clock on downlink 4
14:36:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
14:36:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:45:elinks:INFO: Disabling clock on downlink 0
14:36:45:elinks:INFO: Disabling clock on downlink 1
14:36:45:elinks:INFO: Disabling clock on downlink 2
14:36:45:elinks:INFO: Disabling clock on downlink 3
14:36:45:elinks:INFO: Disabling clock on downlink 4
14:36:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
14:36:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:45:elinks:INFO: Disabling clock on downlink 0
14:36:45:elinks:INFO: Disabling clock on downlink 1
14:36:45:elinks:INFO: Disabling clock on downlink 2
14:36:45:elinks:INFO: Disabling clock on downlink 3
14:36:45:elinks:INFO: Disabling clock on downlink 4
14:36:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
14:36:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
14:36:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
14:36:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
14:36:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
14:36:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
14:36:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
14:36:45:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
14:36:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:45:elinks:INFO: Disabling clock on downlink 0
14:36:45:elinks:INFO: Disabling clock on downlink 1
14:36:45:elinks:INFO: Disabling clock on downlink 2
14:36:45:elinks:INFO: Disabling clock on downlink 3
14:36:45:elinks:INFO: Disabling clock on downlink 4
14:36:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
14:36:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:46:elinks:INFO: Disabling clock on downlink 0
14:36:46:elinks:INFO: Disabling clock on downlink 1
14:36:46:elinks:INFO: Disabling clock on downlink 2
14:36:46:elinks:INFO: Disabling clock on downlink 3
14:36:46:elinks:INFO: Disabling clock on downlink 4
14:36:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
14:36:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
14:36:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
14:36:46:setup_element:INFO: Scanning clock phase
14:36:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:46:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:36:46:setup_element:INFO: Clock phase scan results for group 0, downlink 2
14:36:46:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:36:46:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
14:36:46:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:36:46:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:36:46:setup_element:INFO: Eye window for uplink 28: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:36:46:setup_element:INFO: Eye window for uplink 29: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
14:36:46:setup_element:INFO: Eye window for uplink 30: ______________________________________________________________________XXXXXX____
Clock Delay: 32
14:36:46:setup_element:INFO: Eye window for uplink 31: ______________________________________________________________________XXXXXX____
Clock Delay: 32
14:36:46:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
14:36:46:setup_element:INFO: Scanning data phases
14:36:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:46:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:36:51:setup_element:INFO: Data phase scan results for group 0, downlink 2
14:36:51:setup_element:INFO: Eye window for uplink 24: _______XXXXXX___________________________
Data delay found: 29
14:36:51:setup_element:INFO: Eye window for uplink 25: __________XXXXXX________________________
Data delay found: 32
14:36:51:setup_element:INFO: Eye window for uplink 26: _____XXXXX______________________________
Data delay found: 27
14:36:51:setup_element:INFO: Eye window for uplink 27: ________XXXXXX__________________________
Data delay found: 30
14:36:51:setup_element:INFO: Eye window for uplink 28: ___________XXXXXX_______________________
Data delay found: 33
14:36:51:setup_element:INFO: Eye window for uplink 29: _____________XXXXXX_____________________
Data delay found: 35
14:36:51:setup_element:INFO: Eye window for uplink 30: _____________XXXXXX_____________________
Data delay found: 35
14:36:51:setup_element:INFO: Eye window for uplink 31: ____________XXXXXX______________________
Data delay found: 34
14:36:51:setup_element:INFO: Setting the data phase to 29 for uplink 24
14:36:51:setup_element:INFO: Setting the data phase to 32 for uplink 25
14:36:51:setup_element:INFO: Setting the data phase to 27 for uplink 26
14:36:51:setup_element:INFO: Setting the data phase to 30 for uplink 27
14:36:51:setup_element:INFO: Setting the data phase to 33 for uplink 28
14:36:51:setup_element:INFO: Setting the data phase to 35 for uplink 29
14:36:51:setup_element:INFO: Setting the data phase to 35 for uplink 30
14:36:51:setup_element:INFO: Setting the data phase to 34 for uplink 31
14:36:51:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _____________________________________________________________________XXXXXXXX___
Uplink 29: _____________________________________________________________________XXXXXXXX___
Uplink 30: ______________________________________________________________________XXXXXX____
Uplink 31: ______________________________________________________________________XXXXXX____
Data phase characteristics:
Uplink 24:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 25:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 26:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 27:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 30:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
]
14:36:51:setup_element:INFO: Beginning SMX ASICs map scan
14:36:51:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:51:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:36:51:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:36:51:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:36:51:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
14:36:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
14:36:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
14:36:52:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
14:36:52:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
14:36:52:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
14:36:52:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
14:36:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
14:36:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
14:36:54:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _____________________________________________________________________XXXXXXXX___
Uplink 29: _____________________________________________________________________XXXXXXXX___
Uplink 30: ______________________________________________________________________XXXXXX____
Uplink 31: ______________________________________________________________________XXXXXX____
Data phase characteristics:
Uplink 24:
Optimal Phase: 29
Window Length: 34
Eye Window: _______XXXXXX___________________________
Uplink 25:
Optimal Phase: 32
Window Length: 34
Eye Window: __________XXXXXX________________________
Uplink 26:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 27:
Optimal Phase: 30
Window Length: 34
Eye Window: ________XXXXXX__________________________
Uplink 28:
Optimal Phase: 33
Window Length: 34
Eye Window: ___________XXXXXX_______________________
Uplink 29:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 30:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
14:36:54:setup_element:INFO: Performing Elink synchronization
14:36:54:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
14:36:54:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
14:36:54:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
14:36:54:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
14:36:54:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
14:36:54:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
14:36:54:ST3_emu:INFO: Number of chips: 4
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
14:36:55:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:36:55:febtest:INFO: 30-01 | XA-000-08-002-000-004-211-00 | 31.4 | 1206.9
14:36:56:febtest:INFO: 28-03 | XA-000-08-002-000-004-212-00 | 44.1 | 1171.5
14:36:56:febtest:INFO: 26-05 | XA-000-08-002-000-004-213-00 | 37.7 | 1195.1
14:36:56:febtest:INFO: 24-07 | XA-000-08-002-000-005-002-05 | 44.1 | 1183.3
14:36:56:ST3_smx:INFO: Configuring SMX FAST
14:36:58:ST3_smx:INFO: chip: 30-1 34.556970 C 1195.082160 mV
14:36:58:ST3_smx:INFO: Electrons
14:36:58:ST3_smx:INFO: # loops 0
14:37:00:ST3_smx:INFO: # loops 1
14:37:02:ST3_smx:INFO: # loops 2
14:37:03:ST3_smx:INFO: Total # of broken channels: 0
14:37:03:ST3_smx:INFO: List of broken channels: []
14:37:03:ST3_smx:INFO: Total # of broken channels: 0
14:37:03:ST3_smx:INFO: List of broken channels: []
14:37:04:ST3_smx:INFO: Configuring SMX FAST
14:37:06:ST3_smx:INFO: chip: 28-3 50.430383 C 1153.732915 mV
14:37:06:ST3_smx:INFO: Electrons
14:37:06:ST3_smx:INFO: # loops 0
14:37:08:ST3_smx:INFO: # loops 1
14:37:10:ST3_smx:INFO: # loops 2
14:37:11:ST3_smx:INFO: Total # of broken channels: 0
14:37:11:ST3_smx:INFO: List of broken channels: []
14:37:11:ST3_smx:INFO: Total # of broken channels: 0
14:37:11:ST3_smx:INFO: List of broken channels: []
14:37:12:ST3_smx:INFO: Configuring SMX FAST
14:37:14:ST3_smx:INFO: chip: 26-5 37.726682 C 1189.190035 mV
14:37:14:ST3_smx:INFO: Electrons
14:37:14:ST3_smx:INFO: # loops 0
14:37:16:ST3_smx:INFO: # loops 1
14:37:18:ST3_smx:INFO: # loops 2
14:37:19:ST3_smx:INFO: Total # of broken channels: 0
14:37:19:ST3_smx:INFO: List of broken channels: []
14:37:19:ST3_smx:INFO: Total # of broken channels: 0
14:37:19:ST3_smx:INFO: List of broken channels: []
14:37:20:ST3_smx:INFO: Configuring SMX FAST
14:37:22:ST3_smx:INFO: chip: 24-7 50.430383 C 1165.571835 mV
14:37:22:ST3_smx:INFO: Electrons
14:37:22:ST3_smx:INFO: # loops 0
14:37:24:ST3_smx:INFO: # loops 1
14:37:26:ST3_smx:INFO: # loops 2
14:37:27:ST3_smx:INFO: Total # of broken channels: 0
14:37:27:ST3_smx:INFO: List of broken channels: []
14:37:27:ST3_smx:INFO: Total # of broken channels: 0
14:37:27:ST3_smx:INFO: List of broken channels: []
14:37:28:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
14:37:29:febtest:INFO: 30-01 | XA-000-08-002-000-004-211-00 | 34.6 | 1195.1
14:37:29:febtest:INFO: 28-03 | XA-000-08-002-000-004-212-00 | 50.4 | 1153.7
14:37:29:febtest:INFO: 26-05 | XA-000-08-002-000-004-213-00 | 37.7 | 1189.2
14:37:29:febtest:INFO: 24-07 | XA-000-08-002-000-005-002-05 | 50.4 | 1165.6
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_27-14_36_32
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME :
FEB_SN : 2122
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9363', '1.850', '1.0120']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9793', '1.850', '0.1617']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9790', '1.850', '0.1616']
14:37:36:ST3_Shared:INFO: cp -r tar/GSI/ /home/cbm/public_html/tests/
07:50:06:febtest:INFO: FEB type: 8.2
07:50:06:febtest:INFO: FEB SN: 2121
07:50:08:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:50:08:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
07:50:08:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:50:09:febtest:INFO: Testing FEB with SN 2121
07:50:11:smx_tester:INFO: Scanning setup
07:50:11:elinks:INFO: Disabling clock on downlink 0
07:50:11:elinks:INFO: Disabling clock on downlink 1
07:50:11:elinks:INFO: Disabling clock on downlink 2
07:50:11:elinks:INFO: Disabling clock on downlink 3
07:50:11:elinks:INFO: Disabling clock on downlink 4
07:50:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:50:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
07:50:11:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:50:11:elinks:INFO: Disabling clock on downlink 0
07:50:11:elinks:INFO: Disabling clock on downlink 1
07:50:11:elinks:INFO: Disabling clock on downlink 2
07:50:11:elinks:INFO: Disabling clock on downlink 3
07:50:11:elinks:INFO: Disabling clock on downlink 4
07:50:11:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:50:11:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
07:50:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:50:12:elinks:INFO: Disabling clock on downlink 0
07:50:12:elinks:INFO: Disabling clock on downlink 1
07:50:12:elinks:INFO: Disabling clock on downlink 2
07:50:12:elinks:INFO: Disabling clock on downlink 3
07:50:12:elinks:INFO: Disabling clock on downlink 4
07:50:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:50:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
07:50:12:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
07:50:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:50:12:elinks:INFO: Disabling clock on downlink 0
07:50:12:elinks:INFO: Disabling clock on downlink 1
07:50:12:elinks:INFO: Disabling clock on downlink 2
07:50:12:elinks:INFO: Disabling clock on downlink 3
07:50:12:elinks:INFO: Disabling clock on downlink 4
07:50:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:50:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
07:50:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:50:12:elinks:INFO: Disabling clock on downlink 0
07:50:12:elinks:INFO: Disabling clock on downlink 1
07:50:12:elinks:INFO: Disabling clock on downlink 2
07:50:12:elinks:INFO: Disabling clock on downlink 3
07:50:12:elinks:INFO: Disabling clock on downlink 4
07:50:12:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:50:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
07:50:12:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:50:12:setup_element:INFO: Scanning clock phase
07:50:12:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:50:12:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:50:13:setup_element:INFO: Clock phase scan results for group 0, downlink 2
07:50:13:setup_element:INFO: Eye window for uplink 16: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
07:50:13:setup_element:INFO: Eye window for uplink 17: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
07:50:13:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:50:13:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:50:13:setup_element:INFO: Eye window for uplink 20: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:50:13:setup_element:INFO: Eye window for uplink 21: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:50:13:setup_element:INFO: Eye window for uplink 24: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
07:50:13:setup_element:INFO: Eye window for uplink 25: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
07:50:13:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:50:13:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:50:13:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
07:50:13:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
07:50:13:setup_element:INFO: Eye window for uplink 30: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
07:50:13:setup_element:INFO: Eye window for uplink 31: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
07:50:13:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
07:50:13:setup_element:INFO: Scanning data phases
07:50:13:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:50:13:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:50:18:setup_element:INFO: Data phase scan results for group 0, downlink 2
07:50:18:setup_element:INFO: Eye window for uplink 16: XXXX___________________________________X
Data delay found: 21
07:50:18:setup_element:INFO: Eye window for uplink 17: ___________________________________XXXX_
Data delay found: 16
07:50:18:setup_element:INFO: Eye window for uplink 18: XX_________________________________XXXXX
Data delay found: 18
07:50:18:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXX__
Data delay found: 15
07:50:18:setup_element:INFO: Eye window for uplink 20: ____________________________________XXX_
Data delay found: 17
07:50:18:setup_element:INFO: Eye window for uplink 21: __________________________________XXXXX_
Data delay found: 16
07:50:18:setup_element:INFO: Eye window for uplink 24: ______XXXXX_____________________________
Data delay found: 28
07:50:18:setup_element:INFO: Eye window for uplink 25: _________XXXXX__________________________
Data delay found: 31
07:50:18:setup_element:INFO: Eye window for uplink 26: _________XXXXX__________________________
Data delay found: 31
07:50:18:setup_element:INFO: Eye window for uplink 27: ____________XXXXX_______________________
Data delay found: 34
07:50:18:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
07:50:18:setup_element:INFO: Eye window for uplink 29: _____________XXXX_______________________
Data delay found: 34
07:50:18:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
07:50:18:setup_element:INFO: Eye window for uplink 31: ____________XXXXXX______________________
Data delay found: 34
07:50:18:setup_element:INFO: Setting the data phase to 21 for uplink 16
07:50:18:setup_element:INFO: Setting the data phase to 16 for uplink 17
07:50:18:setup_element:INFO: Setting the data phase to 18 for uplink 18
07:50:18:setup_element:INFO: Setting the data phase to 15 for uplink 19
07:50:18:setup_element:INFO: Setting the data phase to 17 for uplink 20
07:50:18:setup_element:INFO: Setting the data phase to 16 for uplink 21
07:50:18:setup_element:INFO: Setting the data phase to 28 for uplink 24
07:50:18:setup_element:INFO: Setting the data phase to 31 for uplink 25
07:50:18:setup_element:INFO: Setting the data phase to 31 for uplink 26
07:50:18:setup_element:INFO: Setting the data phase to 34 for uplink 27
07:50:18:setup_element:INFO: Setting the data phase to 33 for uplink 28
07:50:18:setup_element:INFO: Setting the data phase to 34 for uplink 29
07:50:18:setup_element:INFO: Setting the data phase to 36 for uplink 30
07:50:18:setup_element:INFO: Setting the data phase to 34 for uplink 31
07:50:18:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 71
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXX_
Uplink 17: ________________________________________________________________________XXXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: ________________________________________________________________________XXXXXXX_
Uplink 25: ________________________________________________________________________XXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: ________________________________________________________________________XXXXXXX_
Uplink 31: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 17
Window Length: 37
Eye Window: ____________________________________XXX_
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 36
Eye Window: _____________XXXX_______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
]
07:50:18:setup_element:INFO: Beginning SMX ASICs map scan
07:50:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:50:18:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:50:18:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
07:50:18:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
07:50:18:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
07:50:19:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
07:50:19:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
07:50:19:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
07:50:19:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
07:50:19:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
07:50:19:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
07:50:19:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
07:50:19:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
07:50:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
07:50:19:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
07:50:20:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
07:50:20:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
07:50:20:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
07:50:20:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
07:50:21:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 71
Eye Windows:
Uplink 16: ________________________________________________________________________XXXXXXX_
Uplink 17: ________________________________________________________________________XXXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: ________________________________________________________________________XXXXXXX_
Uplink 25: ________________________________________________________________________XXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: _______________________________________________________________________XXXXXXX__
Uplink 29: _______________________________________________________________________XXXXXXX__
Uplink 30: ________________________________________________________________________XXXXXXX_
Uplink 31: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 16:
Optimal Phase: 21
Window Length: 35
Eye Window: XXXX___________________________________X
Uplink 17:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 17
Window Length: 37
Eye Window: ____________________________________XXX_
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 27:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 34
Window Length: 36
Eye Window: _____________XXXX_______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
07:50:21:setup_element:INFO: Performing Elink synchronization
07:50:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:50:21:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:50:21:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
07:50:21:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
07:50:21:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
07:50:21:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
07:50:21:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
07:50:22:smx_tester:INFO: Scanning setup
07:50:22:elinks:INFO: Disabling clock on downlink 0
07:50:22:elinks:INFO: Disabling clock on downlink 1
07:50:22:elinks:INFO: Disabling clock on downlink 2
07:50:22:elinks:INFO: Disabling clock on downlink 3
07:50:22:elinks:INFO: Disabling clock on downlink 4
07:50:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:50:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
07:50:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:50:22:elinks:INFO: Disabling clock on downlink 0
07:50:22:elinks:INFO: Disabling clock on downlink 1
07:50:22:elinks:INFO: Disabling clock on downlink 2
07:50:22:elinks:INFO: Disabling clock on downlink 3
07:50:22:elinks:INFO: Disabling clock on downlink 4
07:50:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:50:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
07:50:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:50:22:elinks:INFO: Disabling clock on downlink 0
07:50:22:elinks:INFO: Disabling clock on downlink 1
07:50:22:elinks:INFO: Disabling clock on downlink 2
07:50:22:elinks:INFO: Disabling clock on downlink 3
07:50:22:elinks:INFO: Disabling clock on downlink 4
07:50:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:50:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 16
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 17
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 18
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 19
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 20
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 21
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 30
07:50:22:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 31
07:50:22:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:50:22:elinks:INFO: Disabling clock on downlink 0
07:50:22:elinks:INFO: Disabling clock on downlink 1
07:50:22:elinks:INFO: Disabling clock on downlink 2
07:50:22:elinks:INFO: Disabling clock on downlink 3
07:50:22:elinks:INFO: Disabling clock on downlink 4
07:50:22:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:50:22:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
07:50:23:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:50:23:elinks:INFO: Disabling clock on downlink 0
07:50:23:elinks:INFO: Disabling clock on downlink 1
07:50:23:elinks:INFO: Disabling clock on downlink 2
07:50:23:elinks:INFO: Disabling clock on downlink 3
07:50:23:elinks:INFO: Disabling clock on downlink 4
07:50:23:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:50:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
07:50:23:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:50:23:setup_element:INFO: Scanning clock phase
07:50:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:50:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:50:23:setup_element:INFO: Clock phase scan results for group 0, downlink 2
07:50:23:setup_element:INFO: Eye window for uplink 16: _________________________________________________________________________XXXXXX_
Clock Delay: 35
07:50:23:setup_element:INFO: Eye window for uplink 17: _________________________________________________________________________XXXXXX_
Clock Delay: 35
07:50:23:setup_element:INFO: Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:50:23:setup_element:INFO: Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:50:23:setup_element:INFO: Eye window for uplink 20: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:50:23:setup_element:INFO: Eye window for uplink 21: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:50:23:setup_element:INFO: Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:50:23:setup_element:INFO: Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:50:23:setup_element:INFO: Eye window for uplink 26: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:50:23:setup_element:INFO: Eye window for uplink 27: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:50:23:setup_element:INFO: Eye window for uplink 28: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:50:23:setup_element:INFO: Eye window for uplink 29: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:50:23:setup_element:INFO: Eye window for uplink 30: _________________________________________________________________________XXXXXXX
Clock Delay: 36
07:50:23:setup_element:INFO: Eye window for uplink 31: _________________________________________________________________________XXXXXXX
Clock Delay: 36
07:50:23:setup_element:INFO: Setting the clock phase to 34 for group 0, downlink 2
07:50:23:setup_element:INFO: Scanning data phases
07:50:23:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:50:23:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:50:29:setup_element:INFO: Data phase scan results for group 0, downlink 2
07:50:29:setup_element:INFO: Eye window for uplink 16: XXX____________________________________X
Data delay found: 20
07:50:29:setup_element:INFO: Eye window for uplink 17: ___________________________________XXXX_
Data delay found: 16
07:50:29:setup_element:INFO: Eye window for uplink 18: XX_________________________________XXXXX
Data delay found: 18
07:50:29:setup_element:INFO: Eye window for uplink 19: _________________________________XXXXX__
Data delay found: 15
07:50:29:setup_element:INFO: Eye window for uplink 20: ____________________________________XXXX
Data delay found: 17
07:50:29:setup_element:INFO: Eye window for uplink 21: __________________________________XXXXX_
Data delay found: 16
07:50:29:setup_element:INFO: Eye window for uplink 24: ______XXXXX_____________________________
Data delay found: 28
07:50:29:setup_element:INFO: Eye window for uplink 25: _________XXXXX__________________________
Data delay found: 31
07:50:29:setup_element:INFO: Eye window for uplink 26: ________XXXXX___________________________
Data delay found: 30
07:50:29:setup_element:INFO: Eye window for uplink 27: ___________XXXXX________________________
Data delay found: 33
07:50:29:setup_element:INFO: Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
07:50:29:setup_element:INFO: Eye window for uplink 29: _____________XXXXX______________________
Data delay found: 35
07:50:29:setup_element:INFO: Eye window for uplink 30: ______________XXXXXX____________________
Data delay found: 36
07:50:29:setup_element:INFO: Eye window for uplink 31: ____________XXXXXX______________________
Data delay found: 34
07:50:29:setup_element:INFO: Setting the data phase to 20 for uplink 16
07:50:29:setup_element:INFO: Setting the data phase to 16 for uplink 17
07:50:29:setup_element:INFO: Setting the data phase to 18 for uplink 18
07:50:29:setup_element:INFO: Setting the data phase to 15 for uplink 19
07:50:29:setup_element:INFO: Setting the data phase to 17 for uplink 20
07:50:29:setup_element:INFO: Setting the data phase to 16 for uplink 21
07:50:29:setup_element:INFO: Setting the data phase to 28 for uplink 24
07:50:29:setup_element:INFO: Setting the data phase to 31 for uplink 25
07:50:29:setup_element:INFO: Setting the data phase to 30 for uplink 26
07:50:29:setup_element:INFO: Setting the data phase to 33 for uplink 27
07:50:29:setup_element:INFO: Setting the data phase to 33 for uplink 28
07:50:29:setup_element:INFO: Setting the data phase to 35 for uplink 29
07:50:29:setup_element:INFO: Setting the data phase to 36 for uplink 30
07:50:29:setup_element:INFO: Setting the data phase to 34 for uplink 31
07:50:29:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _________________________________________________________________________XXXXXX_
Uplink 17: _________________________________________________________________________XXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: ______________________________________________________________________XXXXXXXX__
Uplink 29: ______________________________________________________________________XXXXXXXX__
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 20
Window Length: 36
Eye Window: XXX____________________________________X
Uplink 17:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 17
Window Length: 36
Eye Window: ____________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
]
07:50:29:setup_element:INFO: Beginning SMX ASICs map scan
07:50:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:50:29:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:50:29:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
07:50:29:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
07:50:29:uplink:INFO: Setting uplinks mask [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
07:50:29:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 30
07:50:29:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 31
07:50:30:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 21
07:50:30:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 20
07:50:30:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
07:50:30:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
07:50:30:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 19
07:50:30:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 18
07:50:30:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
07:50:30:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
07:50:30:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 17
07:50:30:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 16
07:50:30:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
07:50:31:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
07:50:32:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
ASICs Map:
ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 34
Window Length: 70
Eye Windows:
Uplink 16: _________________________________________________________________________XXXXXX_
Uplink 17: _________________________________________________________________________XXXXXX_
Uplink 18: _______________________________________________________________________XXXXXXXX_
Uplink 19: _______________________________________________________________________XXXXXXXX_
Uplink 20: ______________________________________________________________________XXXXXXXX__
Uplink 21: ______________________________________________________________________XXXXXXXX__
Uplink 24: _______________________________________________________________________XXXXXXXX_
Uplink 25: _______________________________________________________________________XXXXXXXX_
Uplink 26: _______________________________________________________________________XXXXXXXX_
Uplink 27: _______________________________________________________________________XXXXXXXX_
Uplink 28: ______________________________________________________________________XXXXXXXX__
Uplink 29: ______________________________________________________________________XXXXXXXX__
Uplink 30: _________________________________________________________________________XXXXXXX
Uplink 31: _________________________________________________________________________XXXXXXX
Data phase characteristics:
Uplink 16:
Optimal Phase: 20
Window Length: 36
Eye Window: XXX____________________________________X
Uplink 17:
Optimal Phase: 16
Window Length: 36
Eye Window: ___________________________________XXXX_
Uplink 18:
Optimal Phase: 18
Window Length: 33
Eye Window: XX_________________________________XXXXX
Uplink 19:
Optimal Phase: 15
Window Length: 35
Eye Window: _________________________________XXXXX__
Uplink 20:
Optimal Phase: 17
Window Length: 36
Eye Window: ____________________________________XXXX
Uplink 21:
Optimal Phase: 16
Window Length: 35
Eye Window: __________________________________XXXXX_
Uplink 24:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 25:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 26:
Optimal Phase: 30
Window Length: 35
Eye Window: ________XXXXX___________________________
Uplink 27:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 28:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 29:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 30:
Optimal Phase: 36
Window Length: 34
Eye Window: ______________XXXXXX____________________
Uplink 31:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
07:50:32:setup_element:INFO: Performing Elink synchronization
07:50:32:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:50:32:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:50:32:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
07:50:32:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
07:50:32:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
07:50:32:uplink:INFO: Enabling uplinks [16, 17, 18, 19, 20, 21, 24, 25, 26, 27, 28, 29, 30, 31]
07:50:32:ST3_emu:INFO: Number of chips: 7
addr | upli | dwnli | grp | uplinks | uplinks_map
1 | [0] | 2 | 0 | [30] | [(0, 30), (1, 31)]
2 | [0] | 2 | 0 | [21] | [(0, 21), (1, 20)]
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
4 | [0] | 2 | 0 | [19] | [(0, 19), (1, 18)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
6 | [0] | 2 | 0 | [17] | [(0, 17), (1, 16)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_21 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_21 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_2__upli_21
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_19 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_19 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_4__upli_19
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_17 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_17 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_6__upli_17
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
07:50:33:febtest:ERROR: HW addres 1 != 0
07:51:15:febtest:INFO: FEB type: 8.2
07:51:15:febtest:INFO: FEB SN: 2116
07:51:16:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:51:16:ST3_Shared:INFO: -----------------------FEB-Microcable-----------------------
07:51:16:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:51:17:febtest:INFO: Testing FEB with SN 2116
07:51:19:smx_tester:INFO: Scanning setup
07:51:19:elinks:INFO: Disabling clock on downlink 0
07:51:19:elinks:INFO: Disabling clock on downlink 1
07:51:19:elinks:INFO: Disabling clock on downlink 2
07:51:19:elinks:INFO: Disabling clock on downlink 3
07:51:19:elinks:INFO: Disabling clock on downlink 4
07:51:19:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:51:19:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
07:51:20:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:51:20:elinks:INFO: Disabling clock on downlink 0
07:51:20:elinks:INFO: Disabling clock on downlink 1
07:51:20:elinks:INFO: Disabling clock on downlink 2
07:51:20:elinks:INFO: Disabling clock on downlink 3
07:51:20:elinks:INFO: Disabling clock on downlink 4
07:51:20:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:51:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
07:51:20:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:51:20:elinks:INFO: Disabling clock on downlink 0
07:51:20:elinks:INFO: Disabling clock on downlink 1
07:51:20:elinks:INFO: Disabling clock on downlink 2
07:51:20:elinks:INFO: Disabling clock on downlink 3
07:51:20:elinks:INFO: Disabling clock on downlink 4
07:51:20:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:51:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:51:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
07:51:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
07:51:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
07:51:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
07:51:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
07:51:20:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
07:51:20:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:51:20:elinks:INFO: Disabling clock on downlink 0
07:51:20:elinks:INFO: Disabling clock on downlink 1
07:51:20:elinks:INFO: Disabling clock on downlink 2
07:51:20:elinks:INFO: Disabling clock on downlink 3
07:51:20:elinks:INFO: Disabling clock on downlink 4
07:51:20:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:51:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
07:51:20:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:51:20:elinks:INFO: Disabling clock on downlink 0
07:51:20:elinks:INFO: Disabling clock on downlink 1
07:51:20:elinks:INFO: Disabling clock on downlink 2
07:51:20:elinks:INFO: Disabling clock on downlink 3
07:51:20:elinks:INFO: Disabling clock on downlink 4
07:51:20:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:51:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
07:51:20:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:51:20:setup_element:INFO: Scanning clock phase
07:51:20:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:51:20:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:51:21:setup_element:INFO: Clock phase scan results for group 0, downlink 2
07:51:21:setup_element:INFO: Eye window for uplink 24: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
07:51:21:setup_element:INFO: Eye window for uplink 25: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
07:51:21:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
07:51:21:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
07:51:21:setup_element:INFO: Eye window for uplink 28: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:51:21:setup_element:INFO: Eye window for uplink 29: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:51:21:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
07:51:21:setup_element:INFO: Scanning data phases
07:51:21:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:51:21:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:51:26:setup_element:INFO: Data phase scan results for group 0, downlink 2
07:51:26:setup_element:INFO: Eye window for uplink 24: _____XXXXX______________________________
Data delay found: 27
07:51:26:setup_element:INFO: Eye window for uplink 25: ________XXXX____________________________
Data delay found: 29
07:51:26:setup_element:INFO: Eye window for uplink 26: ______XXXXX_____________________________
Data delay found: 28
07:51:26:setup_element:INFO: Eye window for uplink 27: _________XXXXX__________________________
Data delay found: 31
07:51:26:setup_element:INFO: Eye window for uplink 28: ___________XXXXXXX______________________
Data delay found: 34
07:51:26:setup_element:INFO: Eye window for uplink 29: _____________XXXXXXX____________________
Data delay found: 36
07:51:26:setup_element:INFO: Setting the data phase to 27 for uplink 24
07:51:26:setup_element:INFO: Setting the data phase to 29 for uplink 25
07:51:26:setup_element:INFO: Setting the data phase to 28 for uplink 26
07:51:26:setup_element:INFO: Setting the data phase to 31 for uplink 27
07:51:26:setup_element:INFO: Setting the data phase to 34 for uplink 28
07:51:26:setup_element:INFO: Setting the data phase to 36 for uplink 29
07:51:26:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: ______________________________________________________________________XXXXXXXX__
Uplink 29: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 28:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 29:
Optimal Phase: 36
Window Length: 33
Eye Window: _____________XXXXXXX____________________
]
07:51:26:setup_element:INFO: Beginning SMX ASICs map scan
07:51:26:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:51:26:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:51:26:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
07:51:26:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
07:51:26:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29]
07:51:27:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
07:51:27:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
07:51:27:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
07:51:27:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
07:51:27:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
07:51:27:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
07:51:29:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29]
ASICs Map:
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 71
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: ______________________________________________________________________XXXXXXXX__
Uplink 29: ______________________________________________________________________XXXXXXXX__
Data phase characteristics:
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 28:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 29:
Optimal Phase: 36
Window Length: 33
Eye Window: _____________XXXXXXX____________________
07:51:29:setup_element:INFO: Performing Elink synchronization
07:51:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:51:29:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:51:29:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
07:51:29:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
07:51:29:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
07:51:29:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29]
07:51:29:ST3_emu:INFO: Number of chips: 3
addr | upli | dwnli | grp | uplinks | uplinks_map
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
07:51:29:smx_tester:INFO: Scanning setup
07:51:29:elinks:INFO: Disabling clock on downlink 0
07:51:29:elinks:INFO: Disabling clock on downlink 1
07:51:29:elinks:INFO: Disabling clock on downlink 2
07:51:29:elinks:INFO: Disabling clock on downlink 3
07:51:29:elinks:INFO: Disabling clock on downlink 4
07:51:29:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:51:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
07:51:29:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:51:29:elinks:INFO: Disabling clock on downlink 0
07:51:29:elinks:INFO: Disabling clock on downlink 1
07:51:29:elinks:INFO: Disabling clock on downlink 2
07:51:29:elinks:INFO: Disabling clock on downlink 3
07:51:29:elinks:INFO: Disabling clock on downlink 4
07:51:29:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:51:29:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
07:51:30:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:51:30:elinks:INFO: Disabling clock on downlink 0
07:51:30:elinks:INFO: Disabling clock on downlink 1
07:51:30:elinks:INFO: Disabling clock on downlink 2
07:51:30:elinks:INFO: Disabling clock on downlink 3
07:51:30:elinks:INFO: Disabling clock on downlink 4
07:51:30:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:51:30:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:51:30:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 24
07:51:30:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 25
07:51:30:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 26
07:51:30:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 27
07:51:30:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 28
07:51:30:setup_element:INFO: SOS detected for group 0, downlink 2, uplink 29
07:51:30:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:51:30:elinks:INFO: Disabling clock on downlink 0
07:51:30:elinks:INFO: Disabling clock on downlink 1
07:51:30:elinks:INFO: Disabling clock on downlink 2
07:51:30:elinks:INFO: Disabling clock on downlink 3
07:51:30:elinks:INFO: Disabling clock on downlink 4
07:51:30:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:51:30:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
07:51:30:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:51:30:elinks:INFO: Disabling clock on downlink 0
07:51:30:elinks:INFO: Disabling clock on downlink 1
07:51:30:elinks:INFO: Disabling clock on downlink 2
07:51:30:elinks:INFO: Disabling clock on downlink 3
07:51:30:elinks:INFO: Disabling clock on downlink 4
07:51:30:setup_element:INFO: Checking SOS, encoding_mode: SOS
07:51:30:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
07:51:30:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
07:51:30:setup_element:INFO: Scanning clock phase
07:51:30:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:51:30:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:51:30:setup_element:INFO: Clock phase scan results for group 0, downlink 2
07:51:30:setup_element:INFO: Eye window for uplink 24: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
07:51:30:setup_element:INFO: Eye window for uplink 25: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
07:51:30:setup_element:INFO: Eye window for uplink 26: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
07:51:30:setup_element:INFO: Eye window for uplink 27: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
07:51:30:setup_element:INFO: Eye window for uplink 28: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:51:30:setup_element:INFO: Eye window for uplink 29: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
07:51:30:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 2
07:51:30:setup_element:INFO: Scanning data phases
07:51:30:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:51:31:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:51:36:setup_element:INFO: Data phase scan results for group 0, downlink 2
07:51:36:setup_element:INFO: Eye window for uplink 24: _____XXXXX______________________________
Data delay found: 27
07:51:36:setup_element:INFO: Eye window for uplink 25: ________XXXX____________________________
Data delay found: 29
07:51:36:setup_element:INFO: Eye window for uplink 26: ______XXXXX_____________________________
Data delay found: 28
07:51:36:setup_element:INFO: Eye window for uplink 27: _________XXXXX__________________________
Data delay found: 31
07:51:36:setup_element:INFO: Eye window for uplink 28: ___________XXXXXXX______________________
Data delay found: 34
07:51:36:setup_element:INFO: Eye window for uplink 29: _____________XXXXXXX____________________
Data delay found: 36
07:51:36:setup_element:INFO: Setting the data phase to 27 for uplink 24
07:51:36:setup_element:INFO: Setting the data phase to 29 for uplink 25
07:51:36:setup_element:INFO: Setting the data phase to 28 for uplink 26
07:51:36:setup_element:INFO: Setting the data phase to 31 for uplink 27
07:51:36:setup_element:INFO: Setting the data phase to 34 for uplink 28
07:51:36:setup_element:INFO: Setting the data phase to 36 for uplink 29
07:51:36:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 28:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 29:
Optimal Phase: 36
Window Length: 33
Eye Window: _____________XXXXXXX____________________
]
07:51:36:setup_element:INFO: Beginning SMX ASICs map scan
07:51:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:51:36:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:51:36:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
07:51:36:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
07:51:36:uplink:INFO: Setting uplinks mask [24, 25, 26, 27, 28, 29]
07:51:36:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 28
07:51:36:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 29
07:51:37:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 26
07:51:37:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 27
07:51:37:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 24
07:51:37:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 25
07:51:38:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 2
Uplinks: [24, 25, 26, 27, 28, 29]
ASICs Map:
ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 24: _____________________________________________________________________XXXXXXXX___
Uplink 25: _____________________________________________________________________XXXXXXXX___
Uplink 26: _____________________________________________________________________XXXXXXXX___
Uplink 27: _____________________________________________________________________XXXXXXXX___
Uplink 28: _______________________________________________________________________XXXXXXXX_
Uplink 29: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 24:
Optimal Phase: 27
Window Length: 35
Eye Window: _____XXXXX______________________________
Uplink 25:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 26:
Optimal Phase: 28
Window Length: 35
Eye Window: ______XXXXX_____________________________
Uplink 27:
Optimal Phase: 31
Window Length: 35
Eye Window: _________XXXXX__________________________
Uplink 28:
Optimal Phase: 34
Window Length: 33
Eye Window: ___________XXXXXXX______________________
Uplink 29:
Optimal Phase: 36
Window Length: 33
Eye Window: _____________XXXXXXX____________________
07:51:38:setup_element:INFO: Performing Elink synchronization
07:51:38:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
07:51:38:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:51:39:master:INFO: Setting encoding mode EOS for groups [0], downlinks [2]
07:51:39:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [2]
07:51:39:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 2
07:51:39:uplink:INFO: Enabling uplinks [24, 25, 26, 27, 28, 29]
07:51:39:ST3_emu:INFO: Number of chips: 3
addr | upli | dwnli | grp | uplinks | uplinks_map
3 | [0] | 2 | 0 | [28] | [(0, 28), (1, 29)]
5 | [0] | 2 | 0 | [26] | [(0, 26), (1, 27)]
7 | [0] | 2 | 0 | [24] | [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
07:51:39:febtest:ERROR: HW addres 3 != 0
07:51:46:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
07:51:47:febtest:INFO: 28-03 | XA-000-08-002-000-000-253-08 | 44.1 | 1171.5
07:51:47:febtest:INFO: 26-05 | XA-000-08-002-000-004-219-00 | 25.1 | 1230.3
07:51:47:febtest:INFO: 24-07 | XA-000-08-002-000-004-215-00 | 37.7 | 1183.3
07:51:47:ST3_smx:INFO: Configuring SMX FAST
07:51:50:ST3_smx:INFO: chip: 28-3 47.250730 C 1153.732915 mV
07:51:50:ST3_smx:INFO: Electrons
07:51:50:ST3_smx:INFO: # loops 0
07:51:51:ST3_smx:INFO: # loops 1
07:51:53:ST3_smx:INFO: # loops 2
07:51:55:ST3_discr_histo:WARNING: Not enough entries for fit!!!
07:51:55:ST3_discr_histo:WARNING: Not enough entries for fit!!!
07:51:55:ST3_smx:INFO: Total # of broken channels: 98
07:51:55:ST3_smx:INFO: List of broken channels: [1, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 21, 23, 24, 25, 27, 29, 30, 31, 32, 33, 35, 36, 37, 39, 40, 41, 43, 44, 45, 46, 47, 49, 51, 52, 53, 54, 55, 57, 58, 59, 61, 63, 65, 67, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 85, 86, 87, 88, 89, 90, 91, 93, 95, 96, 97, 98, 99, 101, 102, 103, 105, 107, 109, 110, 111, 112, 113, 114, 115, 116, 117, 119, 120, 121, 122, 123, 125, 127]
07:51:55:ST3_smx:INFO: Total # of broken channels: 128
07:51:55:ST3_smx:INFO: List of broken channels: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127]
07:51:55:ST3_smx:INFO: Configuring SMX FAST
07:51:57:ST3_smx:INFO: chip: 26-5 34.556970 C 1206.851500 mV
07:51:57:ST3_smx:INFO: Electrons
07:51:57:ST3_smx:INFO: # loops 0
07:51:59:ST3_smx:INFO: # loops 1
07:52:01:ST3_smx:INFO: # loops 2
07:52:02:ST3_discr_histo:WARNING: Not enough entries for fit!!!
07:52:02:ST3_discr_histo:WARNING: Not enough entries for fit!!!
07:52:02:ST3_smx:INFO: Total # of broken channels: 113
07:52:02:ST3_smx:INFO: List of broken channels: [1, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 99, 101, 103, 105, 107, 108, 109, 111, 113, 114, 115, 117, 118, 119, 121, 122, 123, 125]
07:52:02:ST3_smx:INFO: Total # of broken channels: 128
07:52:02:ST3_smx:INFO: List of broken channels: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127]
07:52:03:ST3_smx:INFO: Configuring SMX FAST
Traceback (most recent call last):
File "febtest.py", line 383, in DoFEB_MicrocableTest
self.EMU.mysmx[i].ConfigASIC_FAST()
File "/home/cbm/ST3_v2.29.14/lib/ST3_smx.py", line 350, in ConfigASIC_FAST
self.smx.write(ch, (2*d+1), 128) # default TRIM
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/smx_tester/smx.py", line 51, in write
return self.ack_monitor.check_write()
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/ack_monitor.py", line 63, in check_write
return self._check(self._check_write, timeout)
File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/ack_monitor.py", line 60, in _check
raise AckNotReceived
hctsp.ack_monitor.AckNotReceived: Ack frame not received
08:03:18:febtest:INFO: FEB type: 8.2
08:03:18:febtest:INFO: FEB SN: 1113
08:03:21:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
08:03:21:ST3_Shared:INFO: -------------------------FEB-Sensor-------------------------
08:03:21:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
08:03:30:ST3_ModuleSelector:INFO: New Sensor ID: 0321
08:03:30:ST3_ModuleSelector:INFO: New Sensor ID: 03213
08:03:31:ST3_ModuleSelector:INFO: L5DL300117 M5DL3T1001171A2 62 B
08:03:31:ST3_ModuleSelector:INFO: 03213
08:03:32:febtest:INFO: Testing FEB with SN 1113
08:03:35:smx_tester:INFO: Scanning setup
08:03:35:elinks:INFO: Disabling clock on downlink 0
08:03:35:elinks:INFO: Disabling clock on downlink 1
08:03:35:elinks:INFO: Disabling clock on downlink 2
08:03:35:elinks:INFO: Disabling clock on downlink 3
08:03:35:elinks:INFO: Disabling clock on downlink 4
08:03:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
08:03:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
08:03:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
08:03:35:elinks:INFO: Disabling clock on downlink 0
08:03:35:elinks:INFO: Disabling clock on downlink 1
08:03:35:elinks:INFO: Disabling clock on downlink 2
08:03:35:elinks:INFO: Disabling clock on downlink 3
08:03:35:elinks:INFO: Disabling clock on downlink 4
08:03:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
08:03:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
08:03:35:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
08:03:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
08:03:35:elinks:INFO: Disabling clock on downlink 0
08:03:35:elinks:INFO: Disabling clock on downlink 1
08:03:35:elinks:INFO: Disabling clock on downlink 2
08:03:35:elinks:INFO: Disabling clock on downlink 3
08:03:35:elinks:INFO: Disabling clock on downlink 4
08:03:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
08:03:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
08:03:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
08:03:35:elinks:INFO: Disabling clock on downlink 0
08:03:35:elinks:INFO: Disabling clock on downlink 1
08:03:35:elinks:INFO: Disabling clock on downlink 2
08:03:35:elinks:INFO: Disabling clock on downlink 3
08:03:35:elinks:INFO: Disabling clock on downlink 4
08:03:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
08:03:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
08:03:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
08:03:35:elinks:INFO: Disabling clock on downlink 0
08:03:35:elinks:INFO: Disabling clock on downlink 1
08:03:35:elinks:INFO: Disabling clock on downlink 2
08:03:35:elinks:INFO: Disabling clock on downlink 3
08:03:35:elinks:INFO: Disabling clock on downlink 4
08:03:35:setup_element:INFO: Checking SOS, encoding_mode: SOS
08:03:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
08:03:35:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
08:03:35:setup_element:INFO: Scanning clock phase
08:03:35:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
08:03:36:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
08:03:36:setup_element:INFO: Clock phase scan results for group 0, downlink 1
08:03:36:setup_element:INFO: Eye window for uplink 0 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
08:03:36:setup_element:INFO: Eye window for uplink 1 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
08:03:36:setup_element:INFO: Eye window for uplink 2 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
08:03:36:setup_element:INFO: Eye window for uplink 3 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
08:03:36:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
08:03:36:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
08:03:36:setup_element:INFO: Eye window for uplink 6 : ________________________________________________________________________XXXXXX__
Clock Delay: 34
08:03:36:setup_element:INFO: Eye window for uplink 7 : ________________________________________________________________________XXXXXX__
Clock Delay: 34
08:03:36:setup_element:INFO: Eye window for uplink 8 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
08:03:36:setup_element:INFO: Eye window for uplink 9 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
08:03:36:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
08:03:36:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
08:03:36:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
08:03:36:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
08:03:36:setup_element:INFO: Eye window for uplink 14: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
08:03:36:setup_element:INFO: Eye window for uplink 15: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
08:03:36:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
08:03:36:setup_element:INFO: Scanning data phases
08:03:36:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
08:03:36:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
08:03:41:setup_element:INFO: Data phase scan results for group 0, downlink 1
08:03:41:setup_element:INFO: Eye window for uplink 0 : ____________XXXXX_______________________
Data delay found: 34
08:03:41:setup_element:INFO: Eye window for uplink 1 : ________XXXX____________________________
Data delay found: 29
08:03:41:setup_element:INFO: Eye window for uplink 2 : _______XXXXX____________________________
Data delay found: 29
08:03:41:setup_element:INFO: Eye window for uplink 3 : ____XXXXX_______________________________
Data delay found: 26
08:03:41:setup_element:INFO: Eye window for uplink 4 : ____XXXXXX______________________________
Data delay found: 26
08:03:41:setup_element:INFO: Eye window for uplink 5 : XXXXXX_________________________________X
Data delay found: 22
08:03:41:setup_element:INFO: Eye window for uplink 6 : _XXXX___________________________________
Data delay found: 22
08:03:42:setup_element:INFO: Eye window for uplink 7 : XXX________________________________XXXXX
Data delay found: 18
08:03:42:setup_element:INFO: Eye window for uplink 8 : _________________________XXXX___________
Data delay found: 6
08:03:42:setup_element:INFO: Eye window for uplink 9 : ______________________________XXXXX_____
Data delay found: 12
08:03:42:setup_element:INFO: Eye window for uplink 10: __________________________XXXXX_________
Data delay found: 8
08:03:42:setup_element:INFO: Eye window for uplink 11: ______________________________XXXXX_____
Data delay found: 12
08:03:42:setup_element:INFO: Eye window for uplink 12: _____________________________XXXXX______
Data delay found: 11
08:03:42:setup_element:INFO: Eye window for uplink 13: ________________________________XXXXX___
Data delay found: 14
08:03:42:setup_element:INFO: Eye window for uplink 14: _____________________________XXXXX______
Data delay found: 11
08:03:42:setup_element:INFO: Eye window for uplink 15: _______________________________XXXXX____
Data delay found: 13
08:03:42:setup_element:INFO: Setting the data phase to 34 for uplink 0
08:03:42:setup_element:INFO: Setting the data phase to 29 for uplink 1
08:03:42:setup_element:INFO: Setting the data phase to 29 for uplink 2
08:03:42:setup_element:INFO: Setting the data phase to 26 for uplink 3
08:03:42:setup_element:INFO: Setting the data phase to 26 for uplink 4
08:03:42:setup_element:INFO: Setting the data phase to 22 for uplink 5
08:03:42:setup_element:INFO: Setting the data phase to 22 for uplink 6
08:03:42:setup_element:INFO: Setting the data phase to 18 for uplink 7
08:03:42:setup_element:INFO: Setting the data phase to 6 for uplink 8
08:03:42:setup_element:INFO: Setting the data phase to 12 for uplink 9
08:03:42:setup_element:INFO: Setting the data phase to 8 for uplink 10
08:03:42:setup_element:INFO: Setting the data phase to 12 for uplink 11
08:03:42:setup_element:INFO: Setting the data phase to 11 for uplink 12
08:03:42:setup_element:INFO: Setting the data phase to 14 for uplink 13
08:03:42:setup_element:INFO: Setting the data phase to 11 for uplink 14
08:03:42:setup_element:INFO: Setting the data phase to 13 for uplink 15
08:03:42:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXX_
Uplink 1: ________________________________________________________________________XXXXXXX_
Uplink 2: _______________________________________________________________________XXXXXX___
Uplink 3: _______________________________________________________________________XXXXXX___
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: ________________________________________________________________________XXXXXX__
Uplink 7: ________________________________________________________________________XXXXXX__
Uplink 8: ______________________________________________________________________XXXXXXX___
Uplink 9: ______________________________________________________________________XXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: ________________________________________________________________________XXXXXXX_
Uplink 15: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 2:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 5:
Optimal Phase: 22
Window Length: 33
Eye Window: XXXXXX_________________________________X
Uplink 6:
Optimal Phase: 22
Window Length: 36
Eye Window: _XXXX___________________________________
Uplink 7:
Optimal Phase: 18
Window Length: 32
Eye Window: XXX________________________________XXXXX
Uplink 8:
Optimal Phase: 6
Window Length: 36
Eye Window: _________________________XXXX___________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 11:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 12:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 13:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 14:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 15:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
]
08:03:42:setup_element:INFO: Beginning SMX ASICs map scan
08:03:42:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
08:03:42:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
08:03:42:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
08:03:42:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
08:03:42:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
08:03:42:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
08:03:42:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
08:03:42:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
08:03:42:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
08:03:42:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
08:03:42:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
08:03:42:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
08:03:42:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
08:03:42:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
08:03:42:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
08:03:43:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
08:03:43:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
08:03:43:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
08:03:43:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
08:03:43:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
08:03:43:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
08:03:44:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXX_
Uplink 1: ________________________________________________________________________XXXXXXX_
Uplink 2: _______________________________________________________________________XXXXXX___
Uplink 3: _______________________________________________________________________XXXXXX___
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: ________________________________________________________________________XXXXXX__
Uplink 7: ________________________________________________________________________XXXXXX__
Uplink 8: ______________________________________________________________________XXXXXXX___
Uplink 9: ______________________________________________________________________XXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: ________________________________________________________________________XXXXXXX_
Uplink 15: ________________________________________________________________________XXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 2:
Optimal Phase: 29
Window Length: 35
Eye Window: _______XXXXX____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 26
Window Length: 34
Eye Window: ____XXXXXX______________________________
Uplink 5:
Optimal Phase: 22
Window Length: 33
Eye Window: XXXXXX_________________________________X
Uplink 6:
Optimal Phase: 22
Window Length: 36
Eye Window: _XXXX___________________________________
Uplink 7:
Optimal Phase: 18
Window Length: 32
Eye Window: XXX________________________________XXXXX
Uplink 8:
Optimal Phase: 6
Window Length: 36
Eye Window: _________________________XXXX___________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 11:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 12:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 13:
Optimal Phase: 14
Window Length: 35
Eye Window: ________________________________XXXXX___
Uplink 14:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 15:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
08:03:44:setup_element:INFO: Performing Elink synchronization
08:03:44:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
08:03:44:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
08:03:44:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
08:03:44:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
08:03:44:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
08:03:44:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
08:03:45:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
08:03:45:smx_tester:INFO: Scanning setup
08:03:45:elinks:INFO: Disabling clock on downlink 0
08:03:45:elinks:INFO: Disabling clock on downlink 1
08:03:45:elinks:INFO: Disabling clock on downlink 2
08:03:45:elinks:INFO: Disabling clock on downlink 3
08:03:45:elinks:INFO: Disabling clock on downlink 4
08:03:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
08:03:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
08:03:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
08:03:45:elinks:INFO: Disabling clock on downlink 0
08:03:45:elinks:INFO: Disabling clock on downlink 1
08:03:45:elinks:INFO: Disabling clock on downlink 2
08:03:45:elinks:INFO: Disabling clock on downlink 3
08:03:45:elinks:INFO: Disabling clock on downlink 4
08:03:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
08:03:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
08:03:45:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
08:03:45:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
08:03:45:elinks:INFO: Disabling clock on downlink 0
08:03:45:elinks:INFO: Disabling clock on downlink 1
08:03:45:elinks:INFO: Disabling clock on downlink 2
08:03:45:elinks:INFO: Disabling clock on downlink 3
08:03:45:elinks:INFO: Disabling clock on downlink 4
08:03:45:setup_element:INFO: Checking SOS, encoding_mode: SOS
08:03:45:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
08:03:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
08:03:46:elinks:INFO: Disabling clock on downlink 0
08:03:46:elinks:INFO: Disabling clock on downlink 1
08:03:46:elinks:INFO: Disabling clock on downlink 2
08:03:46:elinks:INFO: Disabling clock on downlink 3
08:03:46:elinks:INFO: Disabling clock on downlink 4
08:03:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
08:03:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
08:03:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
08:03:46:elinks:INFO: Disabling clock on downlink 0
08:03:46:elinks:INFO: Disabling clock on downlink 1
08:03:46:elinks:INFO: Disabling clock on downlink 2
08:03:46:elinks:INFO: Disabling clock on downlink 3
08:03:46:elinks:INFO: Disabling clock on downlink 4
08:03:46:setup_element:INFO: Checking SOS, encoding_mode: SOS
08:03:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
08:03:46:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
08:03:46:setup_element:INFO: Scanning clock phase
08:03:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
08:03:46:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
08:03:46:setup_element:INFO: Clock phase scan results for group 0, downlink 1
08:03:46:setup_element:INFO: Eye window for uplink 0 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
08:03:46:setup_element:INFO: Eye window for uplink 1 : ________________________________________________________________________XXXXXXX_
Clock Delay: 35
08:03:46:setup_element:INFO: Eye window for uplink 2 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
08:03:46:setup_element:INFO: Eye window for uplink 3 : _______________________________________________________________________XXXXXX___
Clock Delay: 33
08:03:46:setup_element:INFO: Eye window for uplink 4 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
08:03:46:setup_element:INFO: Eye window for uplink 5 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
08:03:46:setup_element:INFO: Eye window for uplink 6 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
08:03:46:setup_element:INFO: Eye window for uplink 7 : _______________________________________________________________________XXXXXXX__
Clock Delay: 34
08:03:46:setup_element:INFO: Eye window for uplink 8 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
08:03:46:setup_element:INFO: Eye window for uplink 9 : ______________________________________________________________________XXXXXXX___
Clock Delay: 33
08:03:46:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
08:03:46:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
08:03:46:setup_element:INFO: Eye window for uplink 12: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
08:03:46:setup_element:INFO: Eye window for uplink 13: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
08:03:46:setup_element:INFO: Eye window for uplink 14: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
08:03:46:setup_element:INFO: Eye window for uplink 15: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
08:03:46:setup_element:INFO: Setting the clock phase to 33 for group 0, downlink 1
08:03:46:setup_element:INFO: Scanning data phases
08:03:46:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
08:03:46:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
08:03:52:setup_element:INFO: Data phase scan results for group 0, downlink 1
08:03:52:setup_element:INFO: Eye window for uplink 0 : ____________XXXXX_______________________
Data delay found: 34
08:03:52:setup_element:INFO: Eye window for uplink 1 : ________XXXX____________________________
Data delay found: 29
08:03:52:setup_element:INFO: Eye window for uplink 2 : ______XXXXXX____________________________
Data delay found: 28
08:03:52:setup_element:INFO: Eye window for uplink 3 : ____XXXXX_______________________________
Data delay found: 26
08:03:52:setup_element:INFO: Eye window for uplink 4 : ___XXXXXX_______________________________
Data delay found: 25
08:03:52:setup_element:INFO: Eye window for uplink 5 : XXXXX__________________________________X
Data delay found: 21
08:03:52:setup_element:INFO: Eye window for uplink 6 : _XXXX___________________________________
Data delay found: 22
08:03:52:setup_element:INFO: Eye window for uplink 7 : XX__________________________________XXXX
Data delay found: 18
08:03:52:setup_element:INFO: Eye window for uplink 8 : _________________________XXXX___________
Data delay found: 6
08:03:52:setup_element:INFO: Eye window for uplink 9 : ______________________________XXXXX_____
Data delay found: 12
08:03:52:setup_element:INFO: Eye window for uplink 10: __________________________XXXXX_________
Data delay found: 8
08:03:52:setup_element:INFO: Eye window for uplink 11: ______________________________XXXXX_____
Data delay found: 12
08:03:52:setup_element:INFO: Eye window for uplink 12: _____________________________XXXX_______
Data delay found: 10
08:03:52:setup_element:INFO: Eye window for uplink 13: _______________________________XXXXX____
Data delay found: 13
08:03:52:setup_element:INFO: Eye window for uplink 14: _____________________________XXXXX______
Data delay found: 11
08:03:52:setup_element:INFO: Eye window for uplink 15: _______________________________XXXXX____
Data delay found: 13
08:03:52:setup_element:INFO: Setting the data phase to 34 for uplink 0
08:03:52:setup_element:INFO: Setting the data phase to 29 for uplink 1
08:03:52:setup_element:INFO: Setting the data phase to 28 for uplink 2
08:03:52:setup_element:INFO: Setting the data phase to 26 for uplink 3
08:03:52:setup_element:INFO: Setting the data phase to 25 for uplink 4
08:03:52:setup_element:INFO: Setting the data phase to 21 for uplink 5
08:03:52:setup_element:INFO: Setting the data phase to 22 for uplink 6
08:03:52:setup_element:INFO: Setting the data phase to 18 for uplink 7
08:03:52:setup_element:INFO: Setting the data phase to 6 for uplink 8
08:03:52:setup_element:INFO: Setting the data phase to 12 for uplink 9
08:03:52:setup_element:INFO: Setting the data phase to 8 for uplink 10
08:03:52:setup_element:INFO: Setting the data phase to 12 for uplink 11
08:03:52:setup_element:INFO: Setting the data phase to 10 for uplink 12
08:03:52:setup_element:INFO: Setting the data phase to 13 for uplink 13
08:03:52:setup_element:INFO: Setting the data phase to 11 for uplink 14
08:03:52:setup_element:INFO: Setting the data phase to 13 for uplink 15
08:03:52:ST3_emu:ERROR: [
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map: None
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXX_
Uplink 1: ________________________________________________________________________XXXXXXX_
Uplink 2: _______________________________________________________________________XXXXXX___
Uplink 3: _______________________________________________________________________XXXXXX___
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _______________________________________________________________________XXXXXXX__
Uplink 7: _______________________________________________________________________XXXXXXX__
Uplink 8: ______________________________________________________________________XXXXXXX___
Uplink 9: ______________________________________________________________________XXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXXX__
Uplink 11: _____________________________________________________________________XXXXXXXXX__
Uplink 12: _______________________________________________________________________XXXXXXX__
Uplink 13: _______________________________________________________________________XXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXXX_
Uplink 15: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 25
Window Length: 34
Eye Window: ___XXXXXX_______________________________
Uplink 5:
Optimal Phase: 21
Window Length: 34
Eye Window: XXXXX__________________________________X
Uplink 6:
Optimal Phase: 22
Window Length: 36
Eye Window: _XXXX___________________________________
Uplink 7:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 8:
Optimal Phase: 6
Window Length: 36
Eye Window: _________________________XXXX___________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 11:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 12:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 13:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 14:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 15:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
]
08:03:52:setup_element:INFO: Beginning SMX ASICs map scan
08:03:52:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
08:03:52:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
08:03:52:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
08:03:52:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
08:03:52:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
08:03:52:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
08:03:52:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
08:03:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
08:03:52:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
08:03:53:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
08:03:53:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
08:03:53:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
08:03:53:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
08:03:53:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
08:03:53:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
08:03:53:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
08:03:53:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
08:03:53:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
08:03:53:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
08:03:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
08:03:53:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
08:03:55:ST3_emu:ERROR:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 33
Window Length: 70
Eye Windows:
Uplink 0: ________________________________________________________________________XXXXXXX_
Uplink 1: ________________________________________________________________________XXXXXXX_
Uplink 2: _______________________________________________________________________XXXXXX___
Uplink 3: _______________________________________________________________________XXXXXX___
Uplink 4: _______________________________________________________________________XXXXXXX__
Uplink 5: _______________________________________________________________________XXXXXXX__
Uplink 6: _______________________________________________________________________XXXXXXX__
Uplink 7: _______________________________________________________________________XXXXXXX__
Uplink 8: ______________________________________________________________________XXXXXXX___
Uplink 9: ______________________________________________________________________XXXXXXX___
Uplink 10: _____________________________________________________________________XXXXXXXXX__
Uplink 11: _____________________________________________________________________XXXXXXXXX__
Uplink 12: _______________________________________________________________________XXXXXXX__
Uplink 13: _______________________________________________________________________XXXXXXX__
Uplink 14: _______________________________________________________________________XXXXXXXX_
Uplink 15: _______________________________________________________________________XXXXXXXX_
Data phase characteristics:
Uplink 0:
Optimal Phase: 34
Window Length: 35
Eye Window: ____________XXXXX_______________________
Uplink 1:
Optimal Phase: 29
Window Length: 36
Eye Window: ________XXXX____________________________
Uplink 2:
Optimal Phase: 28
Window Length: 34
Eye Window: ______XXXXXX____________________________
Uplink 3:
Optimal Phase: 26
Window Length: 35
Eye Window: ____XXXXX_______________________________
Uplink 4:
Optimal Phase: 25
Window Length: 34
Eye Window: ___XXXXXX_______________________________
Uplink 5:
Optimal Phase: 21
Window Length: 34
Eye Window: XXXXX__________________________________X
Uplink 6:
Optimal Phase: 22
Window Length: 36
Eye Window: _XXXX___________________________________
Uplink 7:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 8:
Optimal Phase: 6
Window Length: 36
Eye Window: _________________________XXXX___________
Uplink 9:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 10:
Optimal Phase: 8
Window Length: 35
Eye Window: __________________________XXXXX_________
Uplink 11:
Optimal Phase: 12
Window Length: 35
Eye Window: ______________________________XXXXX_____
Uplink 12:
Optimal Phase: 10
Window Length: 36
Eye Window: _____________________________XXXX_______
Uplink 13:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
Uplink 14:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 15:
Optimal Phase: 13
Window Length: 35
Eye Window: _______________________________XXXXX____
08:03:55:setup_element:INFO: Performing Elink synchronization
08:03:55:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
08:03:55:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
08:03:55:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
08:03:55:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
08:03:55:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
08:03:55:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
08:03:55:ST3_emu:INFO: Number of chips: 8
addr | upli | dwnli | grp | uplinks | uplinks_map
0 | [0] | 1 | 0 | [1] | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | [(0, 14), (1, 15)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_0__upli_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_8 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_8 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_1__upli_8
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_2__upli_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_10 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_10 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_3__upli_10
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_4__upli_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_12 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_12 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_5__upli_12
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_6__upli_7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_14 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_14 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_A__addr_7__upli_14
FEB type: A FEB_A: 1 FEB_B: 0
08:03:56:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
08:03:57:febtest:INFO: 01-00 | XA-000-08-002-000-000-235-15 | 31.4 | 1171.5
08:03:57:febtest:INFO: 08-01 | XA-000-08-002-000-004-195-07 | 21.9 | 1206.9
08:03:57:febtest:INFO: 03-02 | XA-000-08-002-000-000-230-15 | 34.6 | 1177.4
08:03:57:febtest:INFO: 10-03 | XA-000-08-002-000-004-200-07 | 21.9 | 1206.9
08:03:58:febtest:INFO: 05-04 | XA-000-08-002-000-000-223-06 | 25.1 | 1212.7
08:03:58:febtest:INFO: 12-05 | XA-000-08-002-000-004-199-07 | 28.2 | 1183.3
08:03:58:febtest:INFO: 07-06 | XA-000-08-002-000-000-234-15 | 31.4 | 1189.2
08:03:58:febtest:INFO: 14-07 | XA-000-08-002-000-004-198-07 | 15.6 | 1224.5
08:03:59:ST3_smx:INFO: Configuring SMX FAST
08:04:01:ST3_smx:INFO: chip: 1-0 37.726682 C 1153.732915 mV
08:04:01:ST3_smx:INFO: Electrons
08:04:01:ST3_smx:INFO: # loops 0
08:04:02:ST3_smx:INFO: # loops 1
08:04:04:ST3_smx:INFO: # loops 2
08:04:06:ST3_smx:INFO: # loops 3
08:04:07:ST3_smx:INFO: # loops 4
08:04:09:ST3_smx:INFO: Total # of broken channels: 0
08:04:09:ST3_smx:INFO: List of broken channels: []
08:04:09:ST3_smx:INFO: Total # of broken channels: 0
08:04:09:ST3_smx:INFO: List of broken channels: []
08:04:09:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
08:04:10:febtest:INFO: 01-00 | XA-000-08-002-000-000-235-15 | 40.9 | 1153.7
08:04:10:febtest:INFO: 08-01 | XA-000-08-002-000-004-195-07 | 21.9 | 1206.9
08:04:10:febtest:INFO: 03-02 | XA-000-08-002-000-000-230-15 | 34.6 | 1177.4
08:04:10:febtest:INFO: 10-03 | XA-000-08-002-000-004-200-07 | 21.9 | 1206.9
08:04:10:febtest:INFO: 05-04 | XA-000-08-002-000-000-223-06 | 25.1 | 1218.6
08:04:11:febtest:INFO: 12-05 | XA-000-08-002-000-004-199-07 | 28.2 | 1183.3
08:04:11:febtest:INFO: 07-06 | XA-000-08-002-000-000-234-15 | 31.4 | 1189.2
08:04:11:febtest:INFO: 14-07 | XA-000-08-002-000-004-198-07 | 18.7 | 1230.3
08:04:12:ST3_smx:INFO: Configuring SMX FAST
08:04:14:ST3_smx:INFO: chip: 8-1 31.389742 C 1177.390875 mV
08:04:14:ST3_smx:INFO: Electrons
08:04:14:ST3_smx:INFO: # loops 0
08:04:15:ST3_smx:INFO: # loops 1
08:04:17:ST3_smx:INFO: # loops 2
08:04:19:ST3_smx:INFO: # loops 3
08:04:20:ST3_smx:INFO: # loops 4
08:04:22:ST3_smx:INFO: Total # of broken channels: 0
08:04:22:ST3_smx:INFO: List of broken channels: []
08:04:22:ST3_smx:INFO: Total # of broken channels: 0
08:04:22:ST3_smx:INFO: List of broken channels: []
08:04:22:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
08:04:23:febtest:INFO: 01-00 | XA-000-08-002-000-000-235-15 | 37.7 | 1153.7
08:04:23:febtest:INFO: 08-01 | XA-000-08-002-000-004-195-07 | 34.6 | 1183.3
08:04:23:febtest:INFO: 03-02 | XA-000-08-002-000-000-230-15 | 34.6 | 1177.4
08:04:23:febtest:INFO: 10-03 | XA-000-08-002-000-004-200-07 | 21.9 | 1206.9
08:04:23:febtest:INFO: 05-04 | XA-000-08-002-000-000-223-06 | 28.2 | 1218.6
08:04:24:febtest:INFO: 12-05 | XA-000-08-002-000-004-199-07 | 28.2 | 1183.3
08:04:24:febtest:INFO: 07-06 | XA-000-08-002-000-000-234-15 | 31.4 | 1189.2
08:04:24:febtest:INFO: 14-07 | XA-000-08-002-000-004-198-07 | 18.7 | 1230.3
08:04:25:ST3_smx:INFO: Configuring SMX FAST
08:04:27:ST3_smx:INFO: chip: 3-2 31.389742 C 1189.190035 mV
08:04:27:ST3_smx:INFO: Electrons
08:04:27:ST3_smx:INFO: # loops 0
08:04:28:ST3_smx:INFO: # loops 1
08:04:30:ST3_smx:INFO: # loops 2
08:04:32:ST3_smx:INFO: # loops 3
08:04:33:ST3_smx:INFO: # loops 4
08:04:35:ST3_smx:INFO: Total # of broken channels: 0
08:04:35:ST3_smx:INFO: List of broken channels: []
08:04:35:ST3_smx:INFO: Total # of broken channels: 0
08:04:35:ST3_smx:INFO: List of broken channels: []
08:04:35:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
08:04:35:febtest:INFO: 01-00 | XA-000-08-002-000-000-235-15 | 40.9 | 1153.7
08:04:36:febtest:INFO: 08-01 | XA-000-08-002-000-004-195-07 | 31.4 | 1183.3
08:04:36:febtest:INFO: 03-02 | XA-000-08-002-000-000-230-15 | 34.6 | 1189.2
08:04:36:febtest:INFO: 10-03 | XA-000-08-002-000-004-200-07 | 25.1 | 1206.9
08:04:36:febtest:INFO: 05-04 | XA-000-08-002-000-000-223-06 | 28.2 | 1218.6
08:04:36:febtest:INFO: 12-05 | XA-000-08-002-000-004-199-07 | 28.2 | 1183.3
08:04:37:febtest:INFO: 07-06 | XA-000-08-002-000-000-234-15 | 31.4 | 1189.2
08:04:37:febtest:INFO: 14-07 | XA-000-08-002-000-004-198-07 | 18.7 | 1230.3
08:04:38:ST3_smx:INFO: Configuring SMX FAST
08:04:39:ST3_smx:INFO: chip: 10-3 18.745682 C 1230.330540 mV
08:04:39:ST3_smx:INFO: Electrons
08:04:40:ST3_smx:INFO: # loops 0
08:04:41:ST3_smx:INFO: # loops 1
08:04:43:ST3_smx:INFO: # loops 2
08:04:44:ST3_smx:INFO: # loops 3
08:04:46:ST3_smx:INFO: # loops 4
08:04:48:ST3_smx:INFO: Total # of broken channels: 0
08:04:48:ST3_smx:INFO: List of broken channels: []
08:04:48:ST3_smx:INFO: Total # of broken channels: 0
08:04:48:ST3_smx:INFO: List of broken channels: []
08:04:48:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
08:04:48:febtest:INFO: 01-00 | XA-000-08-002-000-000-235-15 | 40.9 | 1153.7
08:04:49:febtest:INFO: 08-01 | XA-000-08-002-000-004-195-07 | 31.4 | 1183.3
08:04:49:febtest:INFO: 03-02 | XA-000-08-002-000-000-230-15 | 34.6 | 1189.2
08:04:49:febtest:INFO: 10-03 | XA-000-08-002-000-004-200-07 | 18.7 | 1236.2
08:04:49:febtest:INFO: 05-04 | XA-000-08-002-000-000-223-06 | 28.2 | 1218.6
08:04:49:febtest:INFO: 12-05 | XA-000-08-002-000-004-199-07 | 31.4 | 1183.3
08:04:50:febtest:INFO: 07-06 | XA-000-08-002-000-000-234-15 | 31.4 | 1189.2
08:04:50:febtest:INFO: 14-07 | XA-000-08-002-000-004-198-07 | 18.7 | 1230.3
08:04:50:ST3_smx:INFO: Configuring SMX FAST
08:04:52:ST3_smx:INFO: chip: 5-4 31.389742 C 1200.969315 mV
08:04:52:ST3_smx:INFO: Electrons
08:04:52:ST3_smx:INFO: # loops 0
08:04:54:ST3_smx:INFO: # loops 1
08:04:56:ST3_smx:INFO: # loops 2
08:04:57:ST3_smx:INFO: # loops 3
08:04:59:ST3_smx:INFO: # loops 4
08:05:01:ST3_smx:INFO: Total # of broken channels: 0
08:05:01:ST3_smx:INFO: List of broken channels: []
08:05:01:ST3_smx:INFO: Total # of broken channels: 0
08:05:01:ST3_smx:INFO: List of broken channels: []
08:05:01:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
08:05:01:febtest:INFO: 01-00 | XA-000-08-002-000-000-235-15 | 40.9 | 1153.7
08:05:01:febtest:INFO: 08-01 | XA-000-08-002-000-004-195-07 | 31.4 | 1183.3
08:05:01:febtest:INFO: 03-02 | XA-000-08-002-000-000-230-15 | 34.6 | 1189.2
08:05:02:febtest:INFO: 10-03 | XA-000-08-002-000-004-200-07 | 18.7 | 1230.3
08:05:02:febtest:INFO: 05-04 | XA-000-08-002-000-000-223-06 | 31.4 | 1201.0
08:05:02:febtest:INFO: 12-05 | XA-000-08-002-000-004-199-07 | 31.4 | 1183.3
08:05:02:febtest:INFO: 07-06 | XA-000-08-002-000-000-234-15 | 31.4 | 1189.2
08:05:03:febtest:INFO: 14-07 | XA-000-08-002-000-004-198-07 | 18.7 | 1230.3
08:05:03:ST3_smx:INFO: Configuring SMX FAST
08:05:05:ST3_smx:INFO: chip: 12-5 31.389742 C 1177.390875 mV
08:05:05:ST3_smx:INFO: Electrons
08:05:05:ST3_smx:INFO: # loops 0
08:05:07:ST3_smx:INFO: # loops 1
08:05:08:ST3_smx:INFO: # loops 2
08:05:10:ST3_smx:INFO: # loops 3
08:05:12:ST3_smx:INFO: # loops 4
08:05:13:ST3_smx:INFO: Total # of broken channels: 0
08:05:13:ST3_smx:INFO: List of broken channels: []
08:05:13:ST3_smx:INFO: Total # of broken channels: 0
08:05:13:ST3_smx:INFO: List of broken channels: []
08:05:14:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
08:05:14:febtest:INFO: 01-00 | XA-000-08-002-000-000-235-15 | 40.9 | 1153.7
08:05:14:febtest:INFO: 08-01 | XA-000-08-002-000-004-195-07 | 31.4 | 1183.3
08:05:14:febtest:INFO: 03-02 | XA-000-08-002-000-000-230-15 | 34.6 | 1189.2
08:05:14:febtest:INFO: 10-03 | XA-000-08-002-000-004-200-07 | 18.7 | 1230.3
08:05:15:febtest:INFO: 05-04 | XA-000-08-002-000-000-223-06 | 31.4 | 1201.0
08:05:15:febtest:INFO: 12-05 | XA-000-08-002-000-004-199-07 | 34.6 | 1177.4
08:05:15:febtest:INFO: 07-06 | XA-000-08-002-000-000-234-15 | 31.4 | 1189.2
08:05:15:febtest:INFO: 14-07 | XA-000-08-002-000-004-198-07 | 18.7 | 1230.3
08:05:16:ST3_smx:INFO: Configuring SMX FAST
08:05:18:ST3_smx:INFO: chip: 7-6 37.726682 C 1177.390875 mV
08:05:18:ST3_smx:INFO: Electrons
08:05:18:ST3_smx:INFO: # loops 0
08:05:20:ST3_smx:INFO: # loops 1
08:05:21:ST3_smx:INFO: # loops 2
08:05:23:ST3_smx:INFO: # loops 3
08:05:24:ST3_smx:INFO: # loops 4
08:05:26:ST3_smx:INFO: Total # of broken channels: 0
08:05:26:ST3_smx:INFO: List of broken channels: []
08:05:26:ST3_smx:INFO: Total # of broken channels: 0
08:05:26:ST3_smx:INFO: List of broken channels: []
08:05:26:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
08:05:27:febtest:INFO: 01-00 | XA-000-08-002-000-000-235-15 | 40.9 | 1153.7
08:05:27:febtest:INFO: 08-01 | XA-000-08-002-000-004-195-07 | 31.4 | 1183.3
08:05:27:febtest:INFO: 03-02 | XA-000-08-002-000-000-230-15 | 34.6 | 1189.2
08:05:27:febtest:INFO: 10-03 | XA-000-08-002-000-004-200-07 | 18.7 | 1236.2
08:05:28:febtest:INFO: 05-04 | XA-000-08-002-000-000-223-06 | 34.6 | 1201.0
08:05:28:febtest:INFO: 12-05 | XA-000-08-002-000-004-199-07 | 34.6 | 1177.4
08:05:28:febtest:INFO: 07-06 | XA-000-08-002-000-000-234-15 | 37.7 | 1177.4
08:05:28:febtest:INFO: 14-07 | XA-000-08-002-000-004-198-07 | 18.7 | 1230.3
08:05:29:ST3_smx:INFO: Configuring SMX FAST
08:05:31:ST3_smx:INFO: chip: 14-7 31.389742 C 1189.190035 mV
08:05:31:ST3_smx:INFO: Electrons
08:05:31:ST3_smx:INFO: # loops 0
08:05:32:ST3_smx:INFO: # loops 1
08:05:34:ST3_smx:INFO: # loops 2
08:05:36:ST3_smx:INFO: # loops 3
08:05:37:ST3_smx:INFO: # loops 4
08:05:39:ST3_smx:INFO: Total # of broken channels: 0
08:05:39:ST3_smx:INFO: List of broken channels: []
08:05:39:ST3_smx:INFO: Total # of broken channels: 0
08:05:39:ST3_smx:INFO: List of broken channels: []
08:05:39:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
08:05:40:febtest:INFO: 01-00 | XA-000-08-002-000-000-235-15 | 40.9 | 1153.7
08:05:40:febtest:INFO: 08-01 | XA-000-08-002-000-004-195-07 | 31.4 | 1183.3
08:05:40:febtest:INFO: 03-02 | XA-000-08-002-000-000-230-15 | 34.6 | 1189.2
08:05:40:febtest:INFO: 10-03 | XA-000-08-002-000-004-200-07 | 18.7 | 1230.3
08:05:40:febtest:INFO: 05-04 | XA-000-08-002-000-000-223-06 | 31.4 | 1201.0
08:05:41:febtest:INFO: 12-05 | XA-000-08-002-000-004-199-07 | 34.6 | 1177.4
08:05:41:febtest:INFO: 07-06 | XA-000-08-002-000-000-234-15 | 34.6 | 1177.4
08:05:41:febtest:INFO: 14-07 | XA-000-08-002-000-004-198-07 | 31.4 | 1189.2
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-Sensor
TEST_DATE : 24_02_28-08_03_21
OPERATOR : Oleksandr S.;
SITE : GSI
SETUP : GSI_TEST_SETUP_1
Set-ID :
---------------------------------------
MODULE_NAME : L5DL300117 M5DL3T1001171A2 62 B
FEB_SN : 1113
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 1
FEB_B : 0
---------------------------------------
SENSOR_ID: 03213
MODULE_NAME: L5DL300117 M5DL3T1001171A2 62 B
MODULE_TYPE:
MODULE_LADDER: L5DL300117
MODULE_MODULE: M5DL3T1001171A2
MODULE_SIZE: 62
MODULE_GRADE: B
---------------------------------------
VI_before_Init : ['2.450', '1.8930', '1.850', '0.5898', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '1.9810', '1.850', '0.3144', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '1.9810', '1.850', '0.3144', '0.000', '0.0000', '0.000', '0.0000']
08:06:58:ST3_Shared:INFO: Listo of operators:Olga B.; Oleksandr S.;
---------------------------------------
MODULE_NAME
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9470', '1.849', '2.7320']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9840', '1.850', '0.3130']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.9820', '1.850', '0.3130']
Traceback (most recent call last):
File "febtest.py", line 626, in Talk2hmp
return super().Talk2hmp()
File "/home/cbm/ST3_v2.29.14/lib/ST3_Shared.py", line 763, in Talk2hmp
self.FEBstate = self.PowerModule.get_state( self.PowerModule.hmp_yaml['C1'] )
File "/home/cbm/ST3_v2.29.14/lib/ST3_hmp4040.py", line 205, in get_state
return int(line)
ValueError: invalid literal for int() with base 10: '0.0000'
FEB_SN : 2116
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.7677', '1.850', '0.9378']
VI_after__Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.0130', '1.850', '0.2485']
VI_at__the_End : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.0120', '1.850', '0.1640']