07:32:42:ST3_hmp4040:INFO:	
07:32:42:febtest:INFO:	FEB8.2 selected
07:33:44:febtest:INFO:	FEB 8-2 B @ GSI
07:33:46:ST3_Shared:INFO:	Listo of operators:Olga B.; 
07:33:57:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
07:33:57:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
07:33:59:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
07:33:59:ST3_emu:ERROR:	device described in file: ../ST3_BASE/config/feb8_2_devices.xml not found!!!
07:34:00:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
07:34:15:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:34:15:ST3_Shared:INFO:	-------------------------FEB-Sensor-------------------------
07:34:15:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:34:15:febtest:INFO:	Tsting FEB with SN 2033
07:34:16:smx_tester:INFO:	Scanning setup
07:34:17:elinks:INFO:	Disabling clock on downlink 0
07:34:17:elinks:INFO:	Disabling clock on downlink 1
07:34:17:elinks:INFO:	Disabling clock on downlink 2
07:34:17:elinks:INFO:	Disabling clock on downlink 3
07:34:17:elinks:INFO:	Disabling clock on downlink 4
07:34:17:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:34:17:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
07:34:17:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:34:17:elinks:INFO:	Disabling clock on downlink 0
07:34:17:elinks:INFO:	Disabling clock on downlink 1
07:34:17:elinks:INFO:	Disabling clock on downlink 2
07:34:17:elinks:INFO:	Disabling clock on downlink 3
07:34:17:elinks:INFO:	Disabling clock on downlink 4
07:34:17:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:34:17:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
07:34:17:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:34:17:elinks:INFO:	Disabling clock on downlink 0
07:34:17:elinks:INFO:	Disabling clock on downlink 1
07:34:17:elinks:INFO:	Disabling clock on downlink 2
07:34:17:elinks:INFO:	Disabling clock on downlink 3
07:34:17:elinks:INFO:	Disabling clock on downlink 4
07:34:17:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:34:17:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 16
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 17
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 18
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 19
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 20
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 21
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 22
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 23
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 24
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 25
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 26
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 27
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 28
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 29
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 30
07:34:17:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 31
07:34:17:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:34:17:elinks:INFO:	Disabling clock on downlink 0
07:34:17:elinks:INFO:	Disabling clock on downlink 1
07:34:17:elinks:INFO:	Disabling clock on downlink 2
07:34:17:elinks:INFO:	Disabling clock on downlink 3
07:34:17:elinks:INFO:	Disabling clock on downlink 4
07:34:17:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:34:17:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:34:17:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:34:17:elinks:INFO:	Disabling clock on downlink 0
07:34:17:elinks:INFO:	Disabling clock on downlink 1
07:34:17:elinks:INFO:	Disabling clock on downlink 2
07:34:17:elinks:INFO:	Disabling clock on downlink 3
07:34:17:elinks:INFO:	Disabling clock on downlink 4
07:34:17:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:34:17:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
07:34:17:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:34:17:setup_element:INFO:	Scanning clock phase
07:34:17:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:34:17:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:34:18:setup_element:INFO:	Clock phase scan results for group 0, downlink 2
07:34:18:setup_element:INFO:	Eye window for uplink 16: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
07:34:18:setup_element:INFO:	Eye window for uplink 17: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
07:34:18:setup_element:INFO:	Eye window for uplink 18: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:34:18:setup_element:INFO:	Eye window for uplink 19: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:34:18:setup_element:INFO:	Eye window for uplink 20: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:34:18:setup_element:INFO:	Eye window for uplink 21: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:34:18:setup_element:INFO:	Eye window for uplink 22: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:34:18:setup_element:INFO:	Eye window for uplink 23: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:34:18:setup_element:INFO:	Eye window for uplink 24: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
07:34:18:setup_element:INFO:	Eye window for uplink 25: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
07:34:18:setup_element:INFO:	Eye window for uplink 26: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:34:18:setup_element:INFO:	Eye window for uplink 27: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:34:18:setup_element:INFO:	Eye window for uplink 28: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
07:34:18:setup_element:INFO:	Eye window for uplink 29: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
07:34:18:setup_element:INFO:	Eye window for uplink 30: ________________________________________________________________________________
Clock Delay: 40
07:34:18:setup_element:INFO:	Eye window for uplink 31: ________________________________________________________________________________
Clock Delay: 40
07:34:18:setup_element:INFO:	Setting the clock phase to 34 for group 0, downlink 2
07:34:18:setup_element:INFO:	Scanning data phases
07:34:18:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:34:18:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:34:23:setup_element:INFO:	Data phase scan results for group 0, downlink 2
07:34:23:setup_element:INFO:	Eye window for uplink 16: XXXX__________________________________XX
Data delay found: 20
07:34:23:setup_element:INFO:	Eye window for uplink 17: __________________________________XXXXX_
Data delay found: 16
07:34:23:setup_element:INFO:	Eye window for uplink 18: __________________________________XXXXX_
Data delay found: 16
07:34:23:setup_element:INFO:	Eye window for uplink 19: _______________________________XXXXX____
Data delay found: 13
07:34:23:setup_element:INFO:	Eye window for uplink 20: __________________________________XXXX__
Data delay found: 15
07:34:23:setup_element:INFO:	Eye window for uplink 21: ________________________________XXXXXX__
Data delay found: 14
07:34:23:setup_element:INFO:	Eye window for uplink 22: __________________________________XXXX__
Data delay found: 15
07:34:23:setup_element:INFO:	Eye window for uplink 23: ________________________________XXXXX___
Data delay found: 14
07:34:23:setup_element:INFO:	Eye window for uplink 24: ____XXXXX_______________________________
Data delay found: 26
07:34:23:setup_element:INFO:	Eye window for uplink 25: ________XXXX____________________________
Data delay found: 29
07:34:23:setup_element:INFO:	Eye window for uplink 26: _____XXXXX______________________________
Data delay found: 27
07:34:23:setup_element:INFO:	Eye window for uplink 27: _________XXXXX__________________________
Data delay found: 31
07:34:23:setup_element:INFO:	Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
07:34:23:setup_element:INFO:	Eye window for uplink 29: _____________XXXXX______________________
Data delay found: 35
07:34:23:setup_element:INFO:	Eye window for uplink 30: _____________XXXXXX_____________________
Data delay found: 35
07:34:23:setup_element:INFO:	Eye window for uplink 31: ____________XXXXX_______________________
Data delay found: 34
07:34:24:setup_element:INFO:	Setting the data phase to 20 for uplink 16
07:34:24:setup_element:INFO:	Setting the data phase to 16 for uplink 17
07:34:24:setup_element:INFO:	Setting the data phase to 16 for uplink 18
07:34:24:setup_element:INFO:	Setting the data phase to 13 for uplink 19
07:34:24:setup_element:INFO:	Setting the data phase to 15 for uplink 20
07:34:24:setup_element:INFO:	Setting the data phase to 14 for uplink 21
07:34:24:setup_element:INFO:	Setting the data phase to 15 for uplink 22
07:34:24:setup_element:INFO:	Setting the data phase to 14 for uplink 23
07:34:24:setup_element:INFO:	Setting the data phase to 26 for uplink 24
07:34:24:setup_element:INFO:	Setting the data phase to 29 for uplink 25
07:34:24:setup_element:INFO:	Setting the data phase to 27 for uplink 26
07:34:24:setup_element:INFO:	Setting the data phase to 31 for uplink 27
07:34:24:setup_element:INFO:	Setting the data phase to 33 for uplink 28
07:34:24:setup_element:INFO:	Setting the data phase to 35 for uplink 29
07:34:24:setup_element:INFO:	Setting the data phase to 35 for uplink 30
07:34:24:setup_element:INFO:	Setting the data phase to 34 for uplink 31
07:34:24:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 2
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 34
    Window Length: 71
    Eye Windows:
      Uplink 16: ________________________________________________________________________XXXXXXX_
      Uplink 17: ________________________________________________________________________XXXXXXX_
      Uplink 18: ______________________________________________________________________XXXXXXXX__
      Uplink 19: ______________________________________________________________________XXXXXXXX__
      Uplink 20: ______________________________________________________________________XXXXXXXX__
      Uplink 21: ______________________________________________________________________XXXXXXXX__
      Uplink 22: ______________________________________________________________________XXXXXXXX__
      Uplink 23: ______________________________________________________________________XXXXXXXX__
      Uplink 24: _______________________________________________________________________XXXXXXX__
      Uplink 25: _______________________________________________________________________XXXXXXX__
      Uplink 26: ______________________________________________________________________XXXXXXXX__
      Uplink 27: ______________________________________________________________________XXXXXXXX__
      Uplink 28: _______________________________________________________________________XXXXXXX__
      Uplink 29: _______________________________________________________________________XXXXXXX__
      Uplink 30: ________________________________________________________________________________
      Uplink 31: ________________________________________________________________________________
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 17:
      Optimal Phase: 16
      Window Length: 35
      Eye Window: __________________________________XXXXX_
    Uplink 18:
      Optimal Phase: 16
      Window Length: 35
      Eye Window: __________________________________XXXXX_
    Uplink 19:
      Optimal Phase: 13
      Window Length: 35
      Eye Window: _______________________________XXXXX____
    Uplink 20:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 21:
      Optimal Phase: 14
      Window Length: 34
      Eye Window: ________________________________XXXXXX__
    Uplink 22:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 23:
      Optimal Phase: 14
      Window Length: 35
      Eye Window: ________________________________XXXXX___
    Uplink 24:
      Optimal Phase: 26
      Window Length: 35
      Eye Window: ____XXXXX_______________________________
    Uplink 25:
      Optimal Phase: 29
      Window Length: 36
      Eye Window: ________XXXX____________________________
    Uplink 26:
      Optimal Phase: 27
      Window Length: 35
      Eye Window: _____XXXXX______________________________
    Uplink 27:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 28:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 29:
      Optimal Phase: 35
      Window Length: 35
      Eye Window: _____________XXXXX______________________
    Uplink 30:
      Optimal Phase: 35
      Window Length: 34
      Eye Window: _____________XXXXXX_____________________
    Uplink 31:
      Optimal Phase: 34
      Window Length: 35
      Eye Window: ____________XXXXX_______________________
]
07:34:24:setup_element:INFO:	Beginning SMX ASICs map scan
07:34:24:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:34:24:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:34:24:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [2]
07:34:24:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [2]
07:34:24:uplink:INFO:	Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
07:34:24:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 0, uplink 23
07:34:24:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 1, uplink 22
07:34:24:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 30
07:34:24:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 31
07:34:24:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 0, uplink 21
07:34:24:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 1, uplink 20
07:34:24:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 28
07:34:24:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 29
07:34:24:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 0, uplink 19
07:34:24:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 1, uplink 18
07:34:25:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 26
07:34:25:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 27
07:34:25:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 0, uplink 17
07:34:25:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 1, uplink 16
07:34:25:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 24
07:34:25:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 25
07:34:26:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 2
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
    ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
    ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
  Clock Phase Characteristic:
    Optimal Phase: 34
    Window Length: 71
    Eye Windows:
      Uplink 16: ________________________________________________________________________XXXXXXX_
      Uplink 17: ________________________________________________________________________XXXXXXX_
      Uplink 18: ______________________________________________________________________XXXXXXXX__
      Uplink 19: ______________________________________________________________________XXXXXXXX__
      Uplink 20: ______________________________________________________________________XXXXXXXX__
      Uplink 21: ______________________________________________________________________XXXXXXXX__
      Uplink 22: ______________________________________________________________________XXXXXXXX__
      Uplink 23: ______________________________________________________________________XXXXXXXX__
      Uplink 24: _______________________________________________________________________XXXXXXX__
      Uplink 25: _______________________________________________________________________XXXXXXX__
      Uplink 26: ______________________________________________________________________XXXXXXXX__
      Uplink 27: ______________________________________________________________________XXXXXXXX__
      Uplink 28: _______________________________________________________________________XXXXXXX__
      Uplink 29: _______________________________________________________________________XXXXXXX__
      Uplink 30: ________________________________________________________________________________
      Uplink 31: ________________________________________________________________________________
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 17:
      Optimal Phase: 16
      Window Length: 35
      Eye Window: __________________________________XXXXX_
    Uplink 18:
      Optimal Phase: 16
      Window Length: 35
      Eye Window: __________________________________XXXXX_
    Uplink 19:
      Optimal Phase: 13
      Window Length: 35
      Eye Window: _______________________________XXXXX____
    Uplink 20:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 21:
      Optimal Phase: 14
      Window Length: 34
      Eye Window: ________________________________XXXXXX__
    Uplink 22:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 23:
      Optimal Phase: 14
      Window Length: 35
      Eye Window: ________________________________XXXXX___
    Uplink 24:
      Optimal Phase: 26
      Window Length: 35
      Eye Window: ____XXXXX_______________________________
    Uplink 25:
      Optimal Phase: 29
      Window Length: 36
      Eye Window: ________XXXX____________________________
    Uplink 26:
      Optimal Phase: 27
      Window Length: 35
      Eye Window: _____XXXXX______________________________
    Uplink 27:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 28:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 29:
      Optimal Phase: 35
      Window Length: 35
      Eye Window: _____________XXXXX______________________
    Uplink 30:
      Optimal Phase: 35
      Window Length: 34
      Eye Window: _____________XXXXXX_____________________
    Uplink 31:
      Optimal Phase: 34
      Window Length: 35
      Eye Window: ____________XXXXX_______________________

07:34:26:setup_element:INFO:	Performing Elink synchronization
07:34:26:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:34:26:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:34:26:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [2]
07:34:26:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [2]
07:34:26:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 2
07:34:26:uplink:INFO:	Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
07:34:26:ST3_emu:INFO:	Number of chips: 8
07:34:26:ST3_emu:INFO:	Chip address:  	0x0
07:34:26:ST3_emu:INFO:	Chip address:  	0x1
07:34:26:ST3_emu:INFO:	Chip address:  	0x2
07:34:26:ST3_emu:INFO:	Chip address:  	0x3
07:34:27:ST3_emu:INFO:	Chip address:  	0x4
07:34:27:ST3_emu:INFO:	Chip address:  	0x5
07:34:27:ST3_emu:INFO:	Chip address:  	0x6
07:34:27:ST3_emu:INFO:	Chip address:  	0x7
07:34:27:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
07:34:28:febtest:INFO:	0-0 | XA-000-08-002-000-001-021-04 |  37.7 | 1165.6
07:34:28:febtest:INFO:	0-1 | XA-000-08-002-000-002-021-10 |  37.7 | 1177.4
07:34:28:febtest:INFO:	0-2 | XA-000-08-002-000-001-024-04 |  47.3 | 1135.9
07:34:28:febtest:INFO:	0-3 | XA-000-08-002-000-002-019-10 |  40.9 | 1159.7
07:34:28:febtest:INFO:	0-4 | XA-000-08-002-000-001-019-04 |  31.4 | 1189.2
07:34:29:febtest:INFO:	0-5 | XA-000-08-002-000-001-017-04 |  40.9 | 1159.7
07:34:29:febtest:INFO:	0-6 | XA-000-08-002-000-001-015-03 |  34.6 | 1177.4
07:34:29:febtest:INFO:	0-7 | XA-000-08-002-000-001-016-04 |  53.6 | 1106.2
07:34:29:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:34:33:ST3_smx:INFO:	chip: 0-0 	 40.898880 C 	 1141.874115 mV
07:34:33:ST3_smx:INFO:	# loops 0
07:34:35:ST3_smx:INFO:	# loops 1
07:34:36:ST3_smx:INFO:	# loops 2
07:34:38:ST3_smx:INFO:	# loops 3
07:34:40:ST3_smx:INFO:	# loops 4
07:34:41:ST3_smx:INFO:	Total # of broken channels: 0
07:34:41:ST3_smx:INFO:	List of broken channels: []
07:34:41:ST3_smx:INFO:	Total # of broken channels: 0
07:34:41:ST3_smx:INFO:	List of broken channels: []
07:34:42:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:34:46:ST3_smx:INFO:	chip: 0-1 	 37.726682 C 	 1165.571835 mV
07:34:46:ST3_smx:INFO:	# loops 0
07:34:48:ST3_smx:INFO:	# loops 1
07:34:49:ST3_smx:INFO:	# loops 2
07:34:51:ST3_smx:INFO:	# loops 3
07:34:53:ST3_smx:INFO:	# loops 4
07:34:54:ST3_smx:INFO:	Total # of broken channels: 0
07:34:54:ST3_smx:INFO:	List of broken channels: []
07:34:54:ST3_smx:INFO:	Total # of broken channels: 5
07:34:54:ST3_smx:INFO:	List of broken channels: [76, 103, 113, 115, 117]
07:34:55:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:34:59:ST3_smx:INFO:	chip: 0-2 	 44.073563 C 	 1141.874115 mV
07:34:59:ST3_smx:INFO:	# loops 0
07:35:00:ST3_smx:INFO:	# loops 1
07:35:02:ST3_smx:INFO:	# loops 2
07:35:04:ST3_smx:INFO:	# loops 3
07:35:05:ST3_smx:INFO:	# loops 4
07:35:07:ST3_smx:INFO:	Total # of broken channels: 0
07:35:07:ST3_smx:INFO:	List of broken channels: []
07:35:07:ST3_smx:INFO:	Total # of broken channels: 0
07:35:07:ST3_smx:INFO:	List of broken channels: []
07:35:07:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:35:11:ST3_smx:INFO:	chip: 0-3 	 44.073563 C 	 1141.874115 mV
07:35:11:ST3_smx:INFO:	# loops 0
07:35:13:ST3_smx:INFO:	# loops 1
07:35:15:ST3_smx:INFO:	# loops 2
07:35:16:ST3_smx:INFO:	# loops 3
07:35:18:ST3_smx:INFO:	# loops 4
07:35:20:ST3_smx:INFO:	Total # of broken channels: 0
07:35:20:ST3_smx:INFO:	List of broken channels: []
07:35:20:ST3_smx:INFO:	Total # of broken channels: 43
07:35:20:ST3_smx:INFO:	List of broken channels: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 35, 41, 43, 47, 51, 53, 55, 59, 61, 63, 71, 75, 79, 87, 91, 95, 101, 105, 107, 109, 111, 113, 115, 117, 119, 121, 125]
07:35:20:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:35:24:ST3_smx:INFO:	chip: 0-4 	 31.389742 C 	 1183.292940 mV
07:35:24:ST3_smx:INFO:	# loops 0
07:35:26:ST3_smx:INFO:	# loops 1
07:35:27:ST3_smx:INFO:	# loops 2
07:35:29:ST3_smx:INFO:	# loops 3
07:35:31:ST3_smx:INFO:	# loops 4
07:35:32:ST3_smx:INFO:	Total # of broken channels: 0
07:35:32:ST3_smx:INFO:	List of broken channels: []
07:35:32:ST3_smx:INFO:	Total # of broken channels: 0
07:35:32:ST3_smx:INFO:	List of broken channels: []
07:35:33:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:35:37:ST3_smx:INFO:	chip: 0-5 	 40.898880 C 	 1153.732915 mV
07:35:37:ST3_smx:INFO:	# loops 0
07:35:38:ST3_smx:INFO:	# loops 1
07:35:40:ST3_smx:INFO:	# loops 2
07:35:42:ST3_smx:INFO:	# loops 3
07:35:43:ST3_smx:INFO:	# loops 4
07:35:45:ST3_smx:INFO:	Total # of broken channels: 0
07:35:45:ST3_smx:INFO:	List of broken channels: []
07:35:45:ST3_smx:INFO:	Total # of broken channels: 0
07:35:45:ST3_smx:INFO:	List of broken channels: []
07:35:45:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:35:49:ST3_smx:INFO:	chip: 0-6 	 47.250730 C 	 1129.995435 mV
07:35:49:ST3_smx:INFO:	# loops 0
07:35:51:ST3_smx:INFO:	# loops 1
07:35:53:ST3_smx:INFO:	# loops 2
07:35:54:ST3_smx:INFO:	# loops 3
07:35:56:ST3_smx:INFO:	# loops 4
07:35:58:ST3_smx:INFO:	Total # of broken channels: 0
07:35:58:ST3_smx:INFO:	List of broken channels: []
07:35:58:ST3_smx:INFO:	Total # of broken channels: 0
07:35:58:ST3_smx:INFO:	List of broken channels: []
07:35:58:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:36:02:ST3_smx:INFO:	chip: 0-7 	 53.612520 C 	 1100.211760 mV
07:36:02:ST3_smx:INFO:	# loops 0
07:36:04:ST3_smx:INFO:	# loops 1
07:36:06:ST3_smx:INFO:	# loops 2
07:36:07:ST3_smx:INFO:	# loops 3
07:36:09:ST3_smx:INFO:	# loops 4
07:36:10:ST3_smx:INFO:	Total # of broken channels: 0
07:36:10:ST3_smx:INFO:	List of broken channels: []
07:36:10:ST3_smx:INFO:	Total # of broken channels: 0
07:36:10:ST3_smx:INFO:	List of broken channels: []
07:36:11:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
07:36:11:febtest:INFO:	0-0 | XA-000-08-002-000-001-021-04 |  47.3 | 1130.0
07:36:12:febtest:INFO:	0-1 | XA-000-08-002-000-002-021-10 |  47.3 | 1147.8
07:36:12:febtest:INFO:	0-2 | XA-000-08-002-000-001-024-04 |  47.3 | 1130.0
07:36:12:febtest:INFO:	0-3 | XA-000-08-002-000-002-019-10 |  47.3 | 1135.9
07:36:12:febtest:INFO:	0-4 | XA-000-08-002-000-001-019-04 |  34.6 | 1177.4
07:36:12:febtest:INFO:	0-5 | XA-000-08-002-000-001-017-04 |  40.9 | 1147.8
07:36:13:febtest:INFO:	0-6 | XA-000-08-002-000-001-015-03 |  50.4 | 1124.0
07:36:13:febtest:INFO:	0-7 | XA-000-08-002-000-001-016-04 |  53.6 | 1100.2
07:36:26:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:36:26:ST3_Shared:INFO:	-------------------------FEB-Sensor-------------------------
07:36:26:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
07:36:26:febtest:INFO:	Tsting FEB with SN 2033
07:36:27:smx_tester:INFO:	Scanning setup
07:36:27:elinks:INFO:	Disabling clock on downlink 0
07:36:27:elinks:INFO:	Disabling clock on downlink 1
07:36:27:elinks:INFO:	Disabling clock on downlink 2
07:36:27:elinks:INFO:	Disabling clock on downlink 3
07:36:27:elinks:INFO:	Disabling clock on downlink 4
07:36:27:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:36:27:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
07:36:27:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:36:27:elinks:INFO:	Disabling clock on downlink 0
07:36:27:elinks:INFO:	Disabling clock on downlink 1
07:36:27:elinks:INFO:	Disabling clock on downlink 2
07:36:27:elinks:INFO:	Disabling clock on downlink 3
07:36:27:elinks:INFO:	Disabling clock on downlink 4
07:36:27:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:36:27:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
07:36:27:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:36:27:elinks:INFO:	Disabling clock on downlink 0
07:36:27:elinks:INFO:	Disabling clock on downlink 1
07:36:27:elinks:INFO:	Disabling clock on downlink 2
07:36:27:elinks:INFO:	Disabling clock on downlink 3
07:36:27:elinks:INFO:	Disabling clock on downlink 4
07:36:27:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:36:27:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 16
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 17
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 18
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 19
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 20
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 21
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 22
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 23
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 24
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 25
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 26
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 27
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 28
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 29
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 30
07:36:28:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 31
07:36:28:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:36:28:elinks:INFO:	Disabling clock on downlink 0
07:36:28:elinks:INFO:	Disabling clock on downlink 1
07:36:28:elinks:INFO:	Disabling clock on downlink 2
07:36:28:elinks:INFO:	Disabling clock on downlink 3
07:36:28:elinks:INFO:	Disabling clock on downlink 4
07:36:28:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:36:28:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
07:36:28:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:36:28:elinks:INFO:	Disabling clock on downlink 0
07:36:28:elinks:INFO:	Disabling clock on downlink 1
07:36:28:elinks:INFO:	Disabling clock on downlink 2
07:36:28:elinks:INFO:	Disabling clock on downlink 3
07:36:28:elinks:INFO:	Disabling clock on downlink 4
07:36:28:setup_element:INFO:	Checking SOS, encoding_mode: SOS
07:36:28:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
07:36:28:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
07:36:28:setup_element:INFO:	Scanning clock phase
07:36:28:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:36:28:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:36:28:setup_element:INFO:	Clock phase scan results for group 0, downlink 2
07:36:28:setup_element:INFO:	Eye window for uplink 16: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
07:36:28:setup_element:INFO:	Eye window for uplink 17: ________________________________________________________________________XXXXXXX_
Clock Delay: 35
07:36:28:setup_element:INFO:	Eye window for uplink 18: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Eye window for uplink 19: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Eye window for uplink 20: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Eye window for uplink 21: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Eye window for uplink 22: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Eye window for uplink 23: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Eye window for uplink 24: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Eye window for uplink 25: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Eye window for uplink 26: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Eye window for uplink 27: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Eye window for uplink 28: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
07:36:28:setup_element:INFO:	Eye window for uplink 29: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
07:36:28:setup_element:INFO:	Eye window for uplink 30: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Eye window for uplink 31: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
07:36:28:setup_element:INFO:	Setting the clock phase to 33 for group 0, downlink 2
07:36:28:setup_element:INFO:	Scanning data phases
07:36:28:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:36:28:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:36:34:setup_element:INFO:	Data phase scan results for group 0, downlink 2
07:36:34:setup_element:INFO:	Eye window for uplink 16: XXXX__________________________________XX
Data delay found: 20
07:36:34:setup_element:INFO:	Eye window for uplink 17: __________________________________XXXXXX
Data delay found: 16
07:36:34:setup_element:INFO:	Eye window for uplink 18: X_________________________________XXXXXX
Data delay found: 17
07:36:34:setup_element:INFO:	Eye window for uplink 19: ________________________________XXXXX___
Data delay found: 14
07:36:34:setup_element:INFO:	Eye window for uplink 20: __________________________________XXXXX_
Data delay found: 16
07:36:34:setup_element:INFO:	Eye window for uplink 21: _________________________________XXXXX__
Data delay found: 15
07:36:34:setup_element:INFO:	Eye window for uplink 22: __________________________________XXXX__
Data delay found: 15
07:36:34:setup_element:INFO:	Eye window for uplink 23: ________________________________XXXXX___
Data delay found: 14
07:36:34:setup_element:INFO:	Eye window for uplink 24: ____XXXXX_______________________________
Data delay found: 26
07:36:34:setup_element:INFO:	Eye window for uplink 25: ________XXXX____________________________
Data delay found: 29
07:36:34:setup_element:INFO:	Eye window for uplink 26: ______XXXX______________________________
Data delay found: 27
07:36:34:setup_element:INFO:	Eye window for uplink 27: ________XXXXXX__________________________
Data delay found: 30
07:36:34:setup_element:INFO:	Eye window for uplink 28: ____________XXXX________________________
Data delay found: 33
07:36:34:setup_element:INFO:	Eye window for uplink 29: _____________XXXXXX_____________________
Data delay found: 35
07:36:34:setup_element:INFO:	Eye window for uplink 30: ______________XXXXXXX___________________
Data delay found: 37
07:36:34:setup_element:INFO:	Eye window for uplink 31: _____________XXXXXX_____________________
Data delay found: 35
07:36:34:setup_element:INFO:	Setting the data phase to 20 for uplink 16
07:36:34:setup_element:INFO:	Setting the data phase to 16 for uplink 17
07:36:34:setup_element:INFO:	Setting the data phase to 17 for uplink 18
07:36:34:setup_element:INFO:	Setting the data phase to 14 for uplink 19
07:36:34:setup_element:INFO:	Setting the data phase to 16 for uplink 20
07:36:34:setup_element:INFO:	Setting the data phase to 15 for uplink 21
07:36:34:setup_element:INFO:	Setting the data phase to 15 for uplink 22
07:36:34:setup_element:INFO:	Setting the data phase to 14 for uplink 23
07:36:34:setup_element:INFO:	Setting the data phase to 26 for uplink 24
07:36:34:setup_element:INFO:	Setting the data phase to 29 for uplink 25
07:36:34:setup_element:INFO:	Setting the data phase to 27 for uplink 26
07:36:34:setup_element:INFO:	Setting the data phase to 30 for uplink 27
07:36:34:setup_element:INFO:	Setting the data phase to 33 for uplink 28
07:36:34:setup_element:INFO:	Setting the data phase to 35 for uplink 29
07:36:34:setup_element:INFO:	Setting the data phase to 37 for uplink 30
07:36:34:setup_element:INFO:	Setting the data phase to 35 for uplink 31
07:36:34:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 2
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 33
    Window Length: 70
    Eye Windows:
      Uplink 16: ________________________________________________________________________XXXXXXX_
      Uplink 17: ________________________________________________________________________XXXXXXX_
      Uplink 18: ______________________________________________________________________XXXXXXXX__
      Uplink 19: ______________________________________________________________________XXXXXXXX__
      Uplink 20: _____________________________________________________________________XXXXXXXXX__
      Uplink 21: _____________________________________________________________________XXXXXXXXX__
      Uplink 22: ______________________________________________________________________XXXXXXXX__
      Uplink 23: ______________________________________________________________________XXXXXXXX__
      Uplink 24: ______________________________________________________________________XXXXXXXX__
      Uplink 25: ______________________________________________________________________XXXXXXXX__
      Uplink 26: ______________________________________________________________________XXXXXXXX__
      Uplink 27: ______________________________________________________________________XXXXXXXX__
      Uplink 28: _______________________________________________________________________XXXXXXX__
      Uplink 29: _______________________________________________________________________XXXXXXX__
      Uplink 30: ______________________________________________________________________XXXXXXXX__
      Uplink 31: ______________________________________________________________________XXXXXXXX__
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 17:
      Optimal Phase: 16
      Window Length: 34
      Eye Window: __________________________________XXXXXX
    Uplink 18:
      Optimal Phase: 17
      Window Length: 33
      Eye Window: X_________________________________XXXXXX
    Uplink 19:
      Optimal Phase: 14
      Window Length: 35
      Eye Window: ________________________________XXXXX___
    Uplink 20:
      Optimal Phase: 16
      Window Length: 35
      Eye Window: __________________________________XXXXX_
    Uplink 21:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__
    Uplink 22:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 23:
      Optimal Phase: 14
      Window Length: 35
      Eye Window: ________________________________XXXXX___
    Uplink 24:
      Optimal Phase: 26
      Window Length: 35
      Eye Window: ____XXXXX_______________________________
    Uplink 25:
      Optimal Phase: 29
      Window Length: 36
      Eye Window: ________XXXX____________________________
    Uplink 26:
      Optimal Phase: 27
      Window Length: 36
      Eye Window: ______XXXX______________________________
    Uplink 27:
      Optimal Phase: 30
      Window Length: 34
      Eye Window: ________XXXXXX__________________________
    Uplink 28:
      Optimal Phase: 33
      Window Length: 36
      Eye Window: ____________XXXX________________________
    Uplink 29:
      Optimal Phase: 35
      Window Length: 34
      Eye Window: _____________XXXXXX_____________________
    Uplink 30:
      Optimal Phase: 37
      Window Length: 33
      Eye Window: ______________XXXXXXX___________________
    Uplink 31:
      Optimal Phase: 35
      Window Length: 34
      Eye Window: _____________XXXXXX_____________________
]
07:36:34:setup_element:INFO:	Beginning SMX ASICs map scan
07:36:34:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:36:34:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:36:34:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [2]
07:36:34:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [2]
07:36:34:uplink:INFO:	Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
07:36:34:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 0, uplink 23
07:36:34:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 1, uplink 22
07:36:34:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 30
07:36:34:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 31
07:36:35:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 0, uplink 21
07:36:35:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 1, uplink 20
07:36:35:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 28
07:36:35:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 29
07:36:35:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 0, uplink 19
07:36:35:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 1, uplink 18
07:36:35:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 26
07:36:35:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 27
07:36:35:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 0, uplink 17
07:36:35:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 1, uplink 16
07:36:36:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 24
07:36:36:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 25
07:36:37:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 2
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
    ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
    ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
  Clock Phase Characteristic:
    Optimal Phase: 33
    Window Length: 70
    Eye Windows:
      Uplink 16: ________________________________________________________________________XXXXXXX_
      Uplink 17: ________________________________________________________________________XXXXXXX_
      Uplink 18: ______________________________________________________________________XXXXXXXX__
      Uplink 19: ______________________________________________________________________XXXXXXXX__
      Uplink 20: _____________________________________________________________________XXXXXXXXX__
      Uplink 21: _____________________________________________________________________XXXXXXXXX__
      Uplink 22: ______________________________________________________________________XXXXXXXX__
      Uplink 23: ______________________________________________________________________XXXXXXXX__
      Uplink 24: ______________________________________________________________________XXXXXXXX__
      Uplink 25: ______________________________________________________________________XXXXXXXX__
      Uplink 26: ______________________________________________________________________XXXXXXXX__
      Uplink 27: ______________________________________________________________________XXXXXXXX__
      Uplink 28: _______________________________________________________________________XXXXXXX__
      Uplink 29: _______________________________________________________________________XXXXXXX__
      Uplink 30: ______________________________________________________________________XXXXXXXX__
      Uplink 31: ______________________________________________________________________XXXXXXXX__
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 17:
      Optimal Phase: 16
      Window Length: 34
      Eye Window: __________________________________XXXXXX
    Uplink 18:
      Optimal Phase: 17
      Window Length: 33
      Eye Window: X_________________________________XXXXXX
    Uplink 19:
      Optimal Phase: 14
      Window Length: 35
      Eye Window: ________________________________XXXXX___
    Uplink 20:
      Optimal Phase: 16
      Window Length: 35
      Eye Window: __________________________________XXXXX_
    Uplink 21:
      Optimal Phase: 15
      Window Length: 35
      Eye Window: _________________________________XXXXX__
    Uplink 22:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 23:
      Optimal Phase: 14
      Window Length: 35
      Eye Window: ________________________________XXXXX___
    Uplink 24:
      Optimal Phase: 26
      Window Length: 35
      Eye Window: ____XXXXX_______________________________
    Uplink 25:
      Optimal Phase: 29
      Window Length: 36
      Eye Window: ________XXXX____________________________
    Uplink 26:
      Optimal Phase: 27
      Window Length: 36
      Eye Window: ______XXXX______________________________
    Uplink 27:
      Optimal Phase: 30
      Window Length: 34
      Eye Window: ________XXXXXX__________________________
    Uplink 28:
      Optimal Phase: 33
      Window Length: 36
      Eye Window: ____________XXXX________________________
    Uplink 29:
      Optimal Phase: 35
      Window Length: 34
      Eye Window: _____________XXXXXX_____________________
    Uplink 30:
      Optimal Phase: 37
      Window Length: 33
      Eye Window: ______________XXXXXXX___________________
    Uplink 31:
      Optimal Phase: 35
      Window Length: 34
      Eye Window: _____________XXXXXX_____________________

07:36:37:setup_element:INFO:	Performing Elink synchronization
07:36:37:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
07:36:37:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
07:36:37:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [2]
07:36:37:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [2]
07:36:37:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 2
07:36:37:uplink:INFO:	Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
07:36:37:ST3_emu:INFO:	Number of chips: 8
07:36:37:ST3_emu:INFO:	Chip address:  	0x0
07:36:37:ST3_emu:INFO:	Chip address:  	0x1
07:36:37:ST3_emu:INFO:	Chip address:  	0x2
07:36:37:ST3_emu:INFO:	Chip address:  	0x3
07:36:37:ST3_emu:INFO:	Chip address:  	0x4
07:36:37:ST3_emu:INFO:	Chip address:  	0x5
07:36:37:ST3_emu:INFO:	Chip address:  	0x6
07:36:37:ST3_emu:INFO:	Chip address:  	0x7
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_0 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_0 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_0
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_1
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_2 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_2 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_2
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_3
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_4 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_4 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_4
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_5
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_6 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_6 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_6
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_7
07:36:38:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
07:36:38:febtest:INFO:	0-0 | XA-000-08-002-000-001-021-04 |  44.1 | 1165.6
07:36:39:febtest:INFO:	0-1 | XA-000-08-002-000-002-021-10 |  37.7 | 1189.2
07:36:39:febtest:INFO:	0-2 | XA-000-08-002-000-001-024-04 |  50.4 | 1135.9
07:36:39:febtest:INFO:	0-3 | XA-000-08-002-000-002-019-10 |  47.3 | 1165.6
07:36:39:febtest:INFO:	0-4 | XA-000-08-002-000-001-019-04 |  37.7 | 1183.3
07:36:40:febtest:INFO:	0-5 | XA-000-08-002-000-001-017-04 |  44.1 | 1153.7
07:36:40:febtest:INFO:	0-6 | XA-000-08-002-000-001-015-03 |  37.7 | 1177.4
07:36:40:febtest:INFO:	0-7 | XA-000-08-002-000-001-016-04 |  56.8 | 1106.2
07:36:40:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:36:44:ST3_smx:INFO:	chip: 0-0 	 47.250730 C 	 1141.874115 mV
07:36:44:ST3_smx:INFO:	# loops 0
07:36:46:ST3_smx:INFO:	# loops 1
07:36:47:ST3_smx:INFO:	# loops 2
07:36:49:ST3_smx:INFO:	# loops 3
07:36:50:ST3_smx:INFO:	# loops 4
07:36:52:ST3_smx:INFO:	Total # of broken channels: 0
07:36:52:ST3_smx:INFO:	List of broken channels: []
07:36:52:ST3_smx:INFO:	Total # of broken channels: 0
07:36:52:ST3_smx:INFO:	List of broken channels: []
07:36:52:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:36:56:ST3_smx:INFO:	chip: 0-1 	 44.073563 C 	 1159.654860 mV
07:36:56:ST3_smx:INFO:	# loops 0
07:36:58:ST3_smx:INFO:	# loops 1
07:36:59:ST3_smx:INFO:	# loops 2
07:37:01:ST3_smx:INFO:	# loops 3
07:37:02:ST3_smx:INFO:	# loops 4
07:37:04:ST3_smx:INFO:	Total # of broken channels: 0
07:37:04:ST3_smx:INFO:	List of broken channels: []
07:37:04:ST3_smx:INFO:	Total # of broken channels: 1
07:37:04:ST3_smx:INFO:	List of broken channels: [76]
07:37:04:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:37:08:ST3_smx:INFO:	chip: 0-2 	 47.250730 C 	 1135.937260 mV
07:37:08:ST3_smx:INFO:	# loops 0
07:37:10:ST3_smx:INFO:	# loops 1
07:37:11:ST3_smx:INFO:	# loops 2
07:37:13:ST3_smx:INFO:	# loops 3
07:37:14:ST3_smx:INFO:	# loops 4
07:37:16:ST3_smx:INFO:	Total # of broken channels: 0
07:37:16:ST3_smx:INFO:	List of broken channels: []
07:37:16:ST3_smx:INFO:	Total # of broken channels: 0
07:37:16:ST3_smx:INFO:	List of broken channels: []
07:37:17:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:37:20:ST3_smx:INFO:	chip: 0-3 	 47.250730 C 	 1141.874115 mV
07:37:20:ST3_smx:INFO:	# loops 0
07:37:22:ST3_smx:INFO:	# loops 1
07:37:24:ST3_smx:INFO:	# loops 2
07:37:25:ST3_smx:INFO:	# loops 3
07:37:27:ST3_smx:INFO:	# loops 4
07:37:28:ST3_smx:INFO:	Total # of broken channels: 0
07:37:28:ST3_smx:INFO:	List of broken channels: []
07:37:28:ST3_smx:INFO:	Total # of broken channels: 0
07:37:28:ST3_smx:INFO:	List of broken channels: []
07:37:29:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:37:33:ST3_smx:INFO:	chip: 0-4 	 34.556970 C 	 1183.292940 mV
07:37:33:ST3_smx:INFO:	# loops 0
07:37:34:ST3_smx:INFO:	# loops 1
07:37:36:ST3_smx:INFO:	# loops 2
07:37:38:ST3_smx:INFO:	# loops 3
07:37:39:ST3_smx:INFO:	# loops 4
07:37:41:ST3_smx:INFO:	Total # of broken channels: 0
07:37:41:ST3_smx:INFO:	List of broken channels: []
07:37:41:ST3_smx:INFO:	Total # of broken channels: 0
07:37:41:ST3_smx:INFO:	List of broken channels: []
07:37:41:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:37:45:ST3_smx:INFO:	chip: 0-5 	 40.898880 C 	 1153.732915 mV
07:37:45:ST3_smx:INFO:	# loops 0
07:37:47:ST3_smx:INFO:	# loops 1
07:37:48:ST3_smx:INFO:	# loops 2
07:37:50:ST3_smx:INFO:	# loops 3
07:37:52:ST3_smx:INFO:	# loops 4
07:37:53:ST3_smx:INFO:	Total # of broken channels: 0
07:37:53:ST3_smx:INFO:	List of broken channels: []
07:37:53:ST3_smx:INFO:	Total # of broken channels: 0
07:37:53:ST3_smx:INFO:	List of broken channels: []
07:37:54:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:37:58:ST3_smx:INFO:	chip: 0-6 	 47.250730 C 	 1124.048640 mV
07:37:58:ST3_smx:INFO:	# loops 0
07:37:59:ST3_smx:INFO:	# loops 1
07:38:01:ST3_smx:INFO:	# loops 2
07:38:02:ST3_smx:INFO:	# loops 3
07:38:04:ST3_smx:INFO:	# loops 4
07:38:06:ST3_smx:INFO:	Total # of broken channels: 0
07:38:06:ST3_smx:INFO:	List of broken channels: []
07:38:06:ST3_smx:INFO:	Total # of broken channels: 0
07:38:06:ST3_smx:INFO:	List of broken channels: []
07:38:06:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
07:38:10:ST3_smx:INFO:	chip: 0-7 	 53.612520 C 	 1100.211760 mV
07:38:10:ST3_smx:INFO:	# loops 0
07:38:11:ST3_smx:INFO:	# loops 1
07:38:13:ST3_smx:INFO:	# loops 2
07:38:15:ST3_smx:INFO:	# loops 3
07:38:16:ST3_smx:INFO:	# loops 4
07:38:18:ST3_smx:INFO:	Total # of broken channels: 0
07:38:18:ST3_smx:INFO:	List of broken channels: []
07:38:18:ST3_smx:INFO:	Total # of broken channels: 0
07:38:18:ST3_smx:INFO:	List of broken channels: []
07:38:18:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
07:38:19:febtest:INFO:	0-0 | XA-000-08-002-000-001-021-04 |  50.4 | 1130.0
07:38:19:febtest:INFO:	0-1 | XA-000-08-002-000-002-021-10 |  47.3 | 1147.8
07:38:19:febtest:INFO:	0-2 | XA-000-08-002-000-001-024-04 |  50.4 | 1130.0
07:38:19:febtest:INFO:	0-3 | XA-000-08-002-000-002-019-10 |  50.4 | 1135.9
07:38:20:febtest:INFO:	0-4 | XA-000-08-002-000-001-019-04 |  37.7 | 1177.4
07:38:20:febtest:INFO:	0-5 | XA-000-08-002-000-001-017-04 |  44.1 | 1147.8
07:38:20:febtest:INFO:	0-6 | XA-000-08-002-000-001-015-03 |  50.4 | 1124.0
07:38:20:febtest:INFO:	0-7 | XA-000-08-002-000-001-016-04 |  56.8 | 1100.2
07:38:32:ST3_Shared:INFO:	/home/cbm/public_html/Production_LogDir//FEB/FEB_2033/TestDate_2023_11_07-07_36_26/