09:17:32:ST3_hmp4040:INFO:	HAMEG,HMP2030,017836163,HW50010002/SW2.30
09:17:33:febtest:INFO:	FEB8.2 selected
09:17:33:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
09:17:45:febtest:INFO:	FEB 8-2 A @ GSI
09:18:57:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
09:18:57:ST3_Shared:INFO:	-------------------------FEB-Sensor-------------------------
09:18:57:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
09:19:35:ST3_ModuleSelector:INFO:	L3DL500114 M3DL5T2001142A2 124 C

09:19:35:ST3_ModuleSelector:INFO:	
09:19:35:febtest:INFO:	Tsting FEB with SN 1041
09:19:37:smx_tester:INFO:	Scanning setup
09:19:37:elinks:INFO:	Disabling clock on downlink 0
09:19:37:elinks:INFO:	Disabling clock on downlink 1
09:19:37:elinks:INFO:	Disabling clock on downlink 2
09:19:37:elinks:INFO:	Disabling clock on downlink 3
09:19:37:elinks:INFO:	Disabling clock on downlink 4
09:19:37:setup_element:INFO:	Checking SOS, encoding_mode: SOS
09:19:37:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
09:19:37:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
09:19:37:elinks:INFO:	Disabling clock on downlink 0
09:19:37:elinks:INFO:	Disabling clock on downlink 1
09:19:37:elinks:INFO:	Disabling clock on downlink 2
09:19:37:elinks:INFO:	Disabling clock on downlink 3
09:19:37:elinks:INFO:	Disabling clock on downlink 4
09:19:37:setup_element:INFO:	Checking SOS, encoding_mode: SOS
09:19:37:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 0
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 1
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 2
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 3
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 4
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 5
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 6
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 7
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 8
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 9
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 10
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 11
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 12
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 13
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 14
09:19:37:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 15
09:19:37:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
09:19:37:elinks:INFO:	Disabling clock on downlink 0
09:19:37:elinks:INFO:	Disabling clock on downlink 1
09:19:37:elinks:INFO:	Disabling clock on downlink 2
09:19:37:elinks:INFO:	Disabling clock on downlink 3
09:19:37:elinks:INFO:	Disabling clock on downlink 4
09:19:37:setup_element:INFO:	Checking SOS, encoding_mode: SOS
09:19:37:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
09:19:37:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
09:19:37:elinks:INFO:	Disabling clock on downlink 0
09:19:37:elinks:INFO:	Disabling clock on downlink 1
09:19:37:elinks:INFO:	Disabling clock on downlink 2
09:19:37:elinks:INFO:	Disabling clock on downlink 3
09:19:37:elinks:INFO:	Disabling clock on downlink 4
09:19:37:setup_element:INFO:	Checking SOS, encoding_mode: SOS
09:19:37:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
09:19:37:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
09:19:37:elinks:INFO:	Disabling clock on downlink 0
09:19:37:elinks:INFO:	Disabling clock on downlink 1
09:19:37:elinks:INFO:	Disabling clock on downlink 2
09:19:37:elinks:INFO:	Disabling clock on downlink 3
09:19:37:elinks:INFO:	Disabling clock on downlink 4
09:19:37:setup_element:INFO:	Checking SOS, encoding_mode: SOS
09:19:37:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
09:19:38:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
09:19:38:setup_element:INFO:	Scanning clock phase
09:19:38:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
09:19:38:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:19:38:setup_element:INFO:	Clock phase scan results for group 0, downlink 1
09:19:38:setup_element:INFO:	Eye window for uplink 0 : _________________________________________________________________________XXXXXXX
Clock Delay: 36
09:19:38:setup_element:INFO:	Eye window for uplink 1 : _________________________________________________________________________XXXXXXX
Clock Delay: 36
09:19:38:setup_element:INFO:	Eye window for uplink 2 : X_________________________________________________________________________XXXXXX
Clock Delay: 37
09:19:38:setup_element:INFO:	Eye window for uplink 3 : X_________________________________________________________________________XXXXXX
Clock Delay: 37
09:19:38:setup_element:INFO:	Eye window for uplink 4 : _________________________________________________________________________XXXXXXX
Clock Delay: 36
09:19:38:setup_element:INFO:	Eye window for uplink 5 : _________________________________________________________________________XXXXXXX
Clock Delay: 36
09:19:38:setup_element:INFO:	Eye window for uplink 6 : X________________________________________________________________________XXXXXXX
Clock Delay: 36
09:19:38:setup_element:INFO:	Eye window for uplink 7 : X________________________________________________________________________XXXXXXX
Clock Delay: 36
09:19:38:setup_element:INFO:	Eye window for uplink 8 : _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
09:19:38:setup_element:INFO:	Eye window for uplink 9 : _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
09:19:38:setup_element:INFO:	Eye window for uplink 10: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
09:19:38:setup_element:INFO:	Eye window for uplink 11: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
09:19:38:setup_element:INFO:	Eye window for uplink 12: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
09:19:38:setup_element:INFO:	Eye window for uplink 13: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
09:19:38:setup_element:INFO:	Eye window for uplink 14: X________________________________________________________________________XXXXXXX
Clock Delay: 36
09:19:38:setup_element:INFO:	Eye window for uplink 15: X________________________________________________________________________XXXXXXX
Clock Delay: 36
09:19:38:setup_element:INFO:	Setting the clock phase to 34 for group 0, downlink 1
09:19:38:setup_element:INFO:	Scanning data phases
09:19:38:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
09:19:38:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:19:43:setup_element:INFO:	Data phase scan results for group 0, downlink 1
09:19:43:setup_element:INFO:	Eye window for uplink 0 : __________XXXXX_________________________
Data delay found: 32
09:19:43:setup_element:INFO:	Eye window for uplink 1 : ______XXXXX_____________________________
Data delay found: 28
09:19:43:setup_element:INFO:	Eye window for uplink 2 : _______XXXXXX___________________________
Data delay found: 29
09:19:43:setup_element:INFO:	Eye window for uplink 3 : _____XXXXXX_____________________________
Data delay found: 27
09:19:43:setup_element:INFO:	Eye window for uplink 4 : ____XXXXX_______________________________
Data delay found: 26
09:19:43:setup_element:INFO:	Eye window for uplink 5 : XXXXX_________________________________XX
Data delay found: 21
09:19:43:setup_element:INFO:	Eye window for uplink 6 : _XXXX___________________________________
Data delay found: 22
09:19:44:setup_element:INFO:	Eye window for uplink 7 : XX_________________________________XXXXX
Data delay found: 18
09:19:44:setup_element:INFO:	Eye window for uplink 8 : ______________________XXXXX_____________
Data delay found: 4
09:19:44:setup_element:INFO:	Eye window for uplink 9 : __________________________XXXXXX________
Data delay found: 8
09:19:44:setup_element:INFO:	Eye window for uplink 10: ___________________________XXXXXX_______
Data delay found: 9
09:19:44:setup_element:INFO:	Eye window for uplink 11: _______________________________XXXXXX___
Data delay found: 13
09:19:44:setup_element:INFO:	Eye window for uplink 12: ____________________________XXXXX_______
Data delay found: 10
09:19:44:setup_element:INFO:	Eye window for uplink 13: _______________________________XXXXX____
Data delay found: 13
09:19:44:setup_element:INFO:	Eye window for uplink 14: _____________________________XXXXX______
Data delay found: 11
09:19:44:setup_element:INFO:	Eye window for uplink 15: _______________________________XXXXXX___
Data delay found: 13
09:19:44:setup_element:INFO:	Setting the data phase to 32 for uplink 0
09:19:44:setup_element:INFO:	Setting the data phase to 28 for uplink 1
09:19:44:setup_element:INFO:	Setting the data phase to 29 for uplink 2
09:19:44:setup_element:INFO:	Setting the data phase to 27 for uplink 3
09:19:44:setup_element:INFO:	Setting the data phase to 26 for uplink 4
09:19:44:setup_element:INFO:	Setting the data phase to 21 for uplink 5
09:19:44:setup_element:INFO:	Setting the data phase to 22 for uplink 6
09:19:44:setup_element:INFO:	Setting the data phase to 18 for uplink 7
09:19:44:setup_element:INFO:	Setting the data phase to 4 for uplink 8
09:19:44:setup_element:INFO:	Setting the data phase to 8 for uplink 9
09:19:44:setup_element:INFO:	Setting the data phase to 9 for uplink 10
09:19:44:setup_element:INFO:	Setting the data phase to 13 for uplink 11
09:19:44:setup_element:INFO:	Setting the data phase to 10 for uplink 12
09:19:44:setup_element:INFO:	Setting the data phase to 13 for uplink 13
09:19:44:setup_element:INFO:	Setting the data phase to 11 for uplink 14
09:19:44:setup_element:INFO:	Setting the data phase to 13 for uplink 15
09:19:44:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 1
  Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 34
    Window Length: 68
    Eye Windows:
      Uplink  0: _________________________________________________________________________XXXXXXX
      Uplink  1: _________________________________________________________________________XXXXXXX
      Uplink  2: X_________________________________________________________________________XXXXXX
      Uplink  3: X_________________________________________________________________________XXXXXX
      Uplink  4: _________________________________________________________________________XXXXXXX
      Uplink  5: _________________________________________________________________________XXXXXXX
      Uplink  6: X________________________________________________________________________XXXXXXX
      Uplink  7: X________________________________________________________________________XXXXXXX
      Uplink  8: _____________________________________________________________________XXXXXXXXX__
      Uplink  9: _____________________________________________________________________XXXXXXXXX__
      Uplink 10: _______________________________________________________________________XXXXXXXXX
      Uplink 11: _______________________________________________________________________XXXXXXXXX
      Uplink 12: ________________________________________________________________________XXXXXXXX
      Uplink 13: ________________________________________________________________________XXXXXXXX
      Uplink 14: X________________________________________________________________________XXXXXXX
      Uplink 15: X________________________________________________________________________XXXXXXX
  Data phase characteristics:
    Uplink 0:
      Optimal Phase: 32
      Window Length: 35
      Eye Window: __________XXXXX_________________________
    Uplink 1:
      Optimal Phase: 28
      Window Length: 35
      Eye Window: ______XXXXX_____________________________
    Uplink 2:
      Optimal Phase: 29
      Window Length: 34
      Eye Window: _______XXXXXX___________________________
    Uplink 3:
      Optimal Phase: 27
      Window Length: 34
      Eye Window: _____XXXXXX_____________________________
    Uplink 4:
      Optimal Phase: 26
      Window Length: 35
      Eye Window: ____XXXXX_______________________________
    Uplink 5:
      Optimal Phase: 21
      Window Length: 33
      Eye Window: XXXXX_________________________________XX
    Uplink 6:
      Optimal Phase: 22
      Window Length: 36
      Eye Window: _XXXX___________________________________
    Uplink 7:
      Optimal Phase: 18
      Window Length: 33
      Eye Window: XX_________________________________XXXXX
    Uplink 8:
      Optimal Phase: 4
      Window Length: 35
      Eye Window: ______________________XXXXX_____________
    Uplink 9:
      Optimal Phase: 8
      Window Length: 34
      Eye Window: __________________________XXXXXX________
    Uplink 10:
      Optimal Phase: 9
      Window Length: 34
      Eye Window: ___________________________XXXXXX_______
    Uplink 11:
      Optimal Phase: 13
      Window Length: 34
      Eye Window: _______________________________XXXXXX___
    Uplink 12:
      Optimal Phase: 10
      Window Length: 35
      Eye Window: ____________________________XXXXX_______
    Uplink 13:
      Optimal Phase: 13
      Window Length: 35
      Eye Window: _______________________________XXXXX____
    Uplink 14:
      Optimal Phase: 11
      Window Length: 35
      Eye Window: _____________________________XXXXX______
    Uplink 15:
      Optimal Phase: 13
      Window Length: 34
      Eye Window: _______________________________XXXXXX___
]
09:19:44:setup_element:INFO:	Beginning SMX ASICs map scan
09:19:44:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
09:19:44:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:19:44:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [1]
09:19:44:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [1]
09:19:44:uplink:INFO:	Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
09:19:44:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 0, uplink 1
09:19:44:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 1, uplink 0
09:19:44:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 8
09:19:44:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 9
09:19:44:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 0, uplink 3
Traceback (most recent call last):
  File "febtest.py", line 365, in DoFEB_SensorTest
    if self.DoScanFEB8(reporter.out_dict):
  File "febtest.py", line 219, in DoScanFEB8
    if self.EMU.Scan_FEB8(reporter):
  File "/home/cbm/ST3_v2.29.04/lib/ST3_emu_feb.py", line 52, in Scan_FEB8
    if super().init_chips():
  File "/home/cbm/ST3_v2.29.04/lib/ST3_emu.py", line 95, in init_chips
    se.scan_smx_asics_map()
  File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/setup_element.py", line 357, in scan_smx_asics_map
    ack_monitor.check_write()
  File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/ack_monitor.py", line 63, in check_write
    return self._check(self._check_write, timeout)
  File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/ack_monitor.py", line 55, in _check
    return check_function()
  File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/ack_monitor.py", line 69, in _check_write
    frame = self._parse_frame(frame)
  File "/home/cbm/ST3_BASE/smx_software_FEB8_2_20MHz/python/hctsp/ack_monitor.py", line 116, in _parse_frame
    raise AckMissed()
hctsp.ack_monitor.AckMissed: At least one Ack frame missed
09:20:14:ST3_Shared:INFO:	Listo of operators:Kerstin S.; 
09:20:54:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
09:21:00:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
09:21:00:ST3_Shared:INFO:	-------------------------FEB-Sensor-------------------------
09:21:00:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
09:21:03:ST3_ModuleSelector:INFO:	L3DL500114 M3DL5T2001142A2 124 C

09:21:03:ST3_ModuleSelector:INFO:	
09:21:03:febtest:INFO:	Tsting FEB with SN 1041
09:21:04:smx_tester:INFO:	Scanning setup
09:21:04:elinks:INFO:	Disabling clock on downlink 0
09:21:04:elinks:INFO:	Disabling clock on downlink 1
09:21:04:elinks:INFO:	Disabling clock on downlink 2
09:21:04:elinks:INFO:	Disabling clock on downlink 3
09:21:04:elinks:INFO:	Disabling clock on downlink 4
09:21:04:setup_element:INFO:	Checking SOS, encoding_mode: SOS
09:21:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
09:21:04:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
09:21:04:elinks:INFO:	Disabling clock on downlink 0
09:21:04:elinks:INFO:	Disabling clock on downlink 1
09:21:04:elinks:INFO:	Disabling clock on downlink 2
09:21:04:elinks:INFO:	Disabling clock on downlink 3
09:21:04:elinks:INFO:	Disabling clock on downlink 4
09:21:04:setup_element:INFO:	Checking SOS, encoding_mode: SOS
09:21:04:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 0
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 1
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 2
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 3
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 4
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 5
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 6
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 7
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 8
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 9
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 10
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 11
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 12
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 13
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 14
09:21:05:setup_element:INFO:	SOS detected for group 0, downlink 1, uplink 15
09:21:05:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
09:21:05:elinks:INFO:	Disabling clock on downlink 0
09:21:05:elinks:INFO:	Disabling clock on downlink 1
09:21:05:elinks:INFO:	Disabling clock on downlink 2
09:21:05:elinks:INFO:	Disabling clock on downlink 3
09:21:05:elinks:INFO:	Disabling clock on downlink 4
09:21:05:setup_element:INFO:	Checking SOS, encoding_mode: SOS
09:21:05:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
09:21:05:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
09:21:05:elinks:INFO:	Disabling clock on downlink 0
09:21:05:elinks:INFO:	Disabling clock on downlink 1
09:21:05:elinks:INFO:	Disabling clock on downlink 2
09:21:05:elinks:INFO:	Disabling clock on downlink 3
09:21:05:elinks:INFO:	Disabling clock on downlink 4
09:21:05:setup_element:INFO:	Checking SOS, encoding_mode: SOS
09:21:05:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
09:21:05:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
09:21:05:elinks:INFO:	Disabling clock on downlink 0
09:21:05:elinks:INFO:	Disabling clock on downlink 1
09:21:05:elinks:INFO:	Disabling clock on downlink 2
09:21:05:elinks:INFO:	Disabling clock on downlink 3
09:21:05:elinks:INFO:	Disabling clock on downlink 4
09:21:05:setup_element:INFO:	Checking SOS, encoding_mode: SOS
09:21:05:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
09:21:05:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
09:21:05:setup_element:INFO:	Scanning clock phase
09:21:05:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
09:21:05:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:21:06:setup_element:INFO:	Clock phase scan results for group 0, downlink 1
09:21:06:setup_element:INFO:	Eye window for uplink 0 : _________________________________________________________________________XXXXXXX
Clock Delay: 36
09:21:06:setup_element:INFO:	Eye window for uplink 1 : _________________________________________________________________________XXXXXXX
Clock Delay: 36
09:21:06:setup_element:INFO:	Eye window for uplink 2 : X_________________________________________________________________________XXXXXX
Clock Delay: 37
09:21:06:setup_element:INFO:	Eye window for uplink 3 : X_________________________________________________________________________XXXXXX
Clock Delay: 37
09:21:06:setup_element:INFO:	Eye window for uplink 4 : ________________________________________________________________________________
Clock Delay: 40
09:21:06:setup_element:INFO:	Eye window for uplink 5 : ________________________________________________________________________________
Clock Delay: 40
09:21:06:setup_element:INFO:	Eye window for uplink 6 : X________________________________________________________________________XXXXXXX
Clock Delay: 36
09:21:06:setup_element:INFO:	Eye window for uplink 7 : X________________________________________________________________________XXXXXXX
Clock Delay: 36
09:21:06:setup_element:INFO:	Eye window for uplink 8 : _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
09:21:06:setup_element:INFO:	Eye window for uplink 9 : _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
09:21:06:setup_element:INFO:	Eye window for uplink 10: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
09:21:06:setup_element:INFO:	Eye window for uplink 11: _______________________________________________________________________XXXXXXXXX
Clock Delay: 35
09:21:06:setup_element:INFO:	Eye window for uplink 12: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
09:21:06:setup_element:INFO:	Eye window for uplink 13: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
09:21:06:setup_element:INFO:	Eye window for uplink 14: X________________________________________________________________________XXXXXXX
Clock Delay: 36
09:21:06:setup_element:INFO:	Eye window for uplink 15: X________________________________________________________________________XXXXXXX
Clock Delay: 36
09:21:06:setup_element:INFO:	Setting the clock phase to 34 for group 0, downlink 1
09:21:06:setup_element:INFO:	Scanning data phases
09:21:06:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
09:21:06:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:21:11:setup_element:INFO:	Data phase scan results for group 0, downlink 1
09:21:11:setup_element:INFO:	Eye window for uplink 0 : _________XXXXX__________________________
Data delay found: 31
09:21:11:setup_element:INFO:	Eye window for uplink 1 : _____XXXXX______________________________
Data delay found: 27
09:21:11:setup_element:INFO:	Eye window for uplink 2 : _______XXXXXX___________________________
Data delay found: 29
09:21:11:setup_element:INFO:	Eye window for uplink 3 : ____XXXXXXX_____________________________
Data delay found: 27
09:21:11:setup_element:INFO:	Eye window for uplink 4 : ___XXXXX________________________________
Data delay found: 25
09:21:11:setup_element:INFO:	Eye window for uplink 5 : XXXX__________________________________XX
Data delay found: 20
09:21:11:setup_element:INFO:	Eye window for uplink 6 : XXXXX__________________________________X
Data delay found: 21
09:21:11:setup_element:INFO:	Eye window for uplink 7 : X__________________________________XXXXX
Data delay found: 17
09:21:11:setup_element:INFO:	Eye window for uplink 8 : ______________________XXXXX_____________
Data delay found: 4
09:21:11:setup_element:INFO:	Eye window for uplink 9 : __________________________XXXXX_________
Data delay found: 8
09:21:11:setup_element:INFO:	Eye window for uplink 10: ____________________________XXXXX_______
Data delay found: 10
09:21:11:setup_element:INFO:	Eye window for uplink 11: _______________________________XXXXX____
Data delay found: 13
09:21:11:setup_element:INFO:	Eye window for uplink 12: ___________________________XXXXXX_______
Data delay found: 9
09:21:11:setup_element:INFO:	Eye window for uplink 13: ______________________________XXXXXX____
Data delay found: 12
09:21:11:setup_element:INFO:	Eye window for uplink 14: _____________________________XXXXX______
Data delay found: 11
09:21:11:setup_element:INFO:	Eye window for uplink 15: _______________________________XXXXXX___
Data delay found: 13
09:21:11:setup_element:INFO:	Setting the data phase to 31 for uplink 0
09:21:11:setup_element:INFO:	Setting the data phase to 27 for uplink 1
09:21:11:setup_element:INFO:	Setting the data phase to 29 for uplink 2
09:21:11:setup_element:INFO:	Setting the data phase to 27 for uplink 3
09:21:11:setup_element:INFO:	Setting the data phase to 25 for uplink 4
09:21:11:setup_element:INFO:	Setting the data phase to 20 for uplink 5
09:21:11:setup_element:INFO:	Setting the data phase to 21 for uplink 6
09:21:11:setup_element:INFO:	Setting the data phase to 17 for uplink 7
09:21:11:setup_element:INFO:	Setting the data phase to 4 for uplink 8
09:21:11:setup_element:INFO:	Setting the data phase to 8 for uplink 9
09:21:11:setup_element:INFO:	Setting the data phase to 10 for uplink 10
09:21:11:setup_element:INFO:	Setting the data phase to 13 for uplink 11
09:21:11:setup_element:INFO:	Setting the data phase to 9 for uplink 12
09:21:11:setup_element:INFO:	Setting the data phase to 12 for uplink 13
09:21:11:setup_element:INFO:	Setting the data phase to 11 for uplink 14
09:21:11:setup_element:INFO:	Setting the data phase to 13 for uplink 15
09:21:11:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 1
  Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 34
    Window Length: 68
    Eye Windows:
      Uplink  0: _________________________________________________________________________XXXXXXX
      Uplink  1: _________________________________________________________________________XXXXXXX
      Uplink  2: X_________________________________________________________________________XXXXXX
      Uplink  3: X_________________________________________________________________________XXXXXX
      Uplink  4: ________________________________________________________________________________
      Uplink  5: ________________________________________________________________________________
      Uplink  6: X________________________________________________________________________XXXXXXX
      Uplink  7: X________________________________________________________________________XXXXXXX
      Uplink  8: _____________________________________________________________________XXXXXXXXX__
      Uplink  9: _____________________________________________________________________XXXXXXXXX__
      Uplink 10: _______________________________________________________________________XXXXXXXXX
      Uplink 11: _______________________________________________________________________XXXXXXXXX
      Uplink 12: ________________________________________________________________________XXXXXXXX
      Uplink 13: ________________________________________________________________________XXXXXXXX
      Uplink 14: X________________________________________________________________________XXXXXXX
      Uplink 15: X________________________________________________________________________XXXXXXX
  Data phase characteristics:
    Uplink 0:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 1:
      Optimal Phase: 27
      Window Length: 35
      Eye Window: _____XXXXX______________________________
    Uplink 2:
      Optimal Phase: 29
      Window Length: 34
      Eye Window: _______XXXXXX___________________________
    Uplink 3:
      Optimal Phase: 27
      Window Length: 33
      Eye Window: ____XXXXXXX_____________________________
    Uplink 4:
      Optimal Phase: 25
      Window Length: 35
      Eye Window: ___XXXXX________________________________
    Uplink 5:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 6:
      Optimal Phase: 21
      Window Length: 34
      Eye Window: XXXXX__________________________________X
    Uplink 7:
      Optimal Phase: 17
      Window Length: 34
      Eye Window: X__________________________________XXXXX
    Uplink 8:
      Optimal Phase: 4
      Window Length: 35
      Eye Window: ______________________XXXXX_____________
    Uplink 9:
      Optimal Phase: 8
      Window Length: 35
      Eye Window: __________________________XXXXX_________
    Uplink 10:
      Optimal Phase: 10
      Window Length: 35
      Eye Window: ____________________________XXXXX_______
    Uplink 11:
      Optimal Phase: 13
      Window Length: 35
      Eye Window: _______________________________XXXXX____
    Uplink 12:
      Optimal Phase: 9
      Window Length: 34
      Eye Window: ___________________________XXXXXX_______
    Uplink 13:
      Optimal Phase: 12
      Window Length: 34
      Eye Window: ______________________________XXXXXX____
    Uplink 14:
      Optimal Phase: 11
      Window Length: 35
      Eye Window: _____________________________XXXXX______
    Uplink 15:
      Optimal Phase: 13
      Window Length: 34
      Eye Window: _______________________________XXXXXX___
]
09:21:11:setup_element:INFO:	Beginning SMX ASICs map scan
09:21:11:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
09:21:11:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:21:11:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [1]
09:21:11:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [1]
09:21:11:uplink:INFO:	Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
09:21:11:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 0, uplink 1
09:21:11:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 1, uplink 0
09:21:12:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 8
09:21:12:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 9
09:21:12:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 0, uplink 3
09:21:12:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 1, uplink 2
09:21:12:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 10
09:21:12:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 11
09:21:12:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 0, uplink 5
09:21:12:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 1, uplink 4
09:21:12:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 12
09:21:12:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 13
09:21:13:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 0, uplink 7
09:21:13:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 1, uplink 6
09:21:13:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 14
09:21:13:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 15
09:21:14:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 1
  Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
  ASICs Map:
    ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
    ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
    ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
    ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
    ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
  Clock Phase Characteristic:
    Optimal Phase: 34
    Window Length: 68
    Eye Windows:
      Uplink  0: _________________________________________________________________________XXXXXXX
      Uplink  1: _________________________________________________________________________XXXXXXX
      Uplink  2: X_________________________________________________________________________XXXXXX
      Uplink  3: X_________________________________________________________________________XXXXXX
      Uplink  4: ________________________________________________________________________________
      Uplink  5: ________________________________________________________________________________
      Uplink  6: X________________________________________________________________________XXXXXXX
      Uplink  7: X________________________________________________________________________XXXXXXX
      Uplink  8: _____________________________________________________________________XXXXXXXXX__
      Uplink  9: _____________________________________________________________________XXXXXXXXX__
      Uplink 10: _______________________________________________________________________XXXXXXXXX
      Uplink 11: _______________________________________________________________________XXXXXXXXX
      Uplink 12: ________________________________________________________________________XXXXXXXX
      Uplink 13: ________________________________________________________________________XXXXXXXX
      Uplink 14: X________________________________________________________________________XXXXXXX
      Uplink 15: X________________________________________________________________________XXXXXXX
  Data phase characteristics:
    Uplink 0:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 1:
      Optimal Phase: 27
      Window Length: 35
      Eye Window: _____XXXXX______________________________
    Uplink 2:
      Optimal Phase: 29
      Window Length: 34
      Eye Window: _______XXXXXX___________________________
    Uplink 3:
      Optimal Phase: 27
      Window Length: 33
      Eye Window: ____XXXXXXX_____________________________
    Uplink 4:
      Optimal Phase: 25
      Window Length: 35
      Eye Window: ___XXXXX________________________________
    Uplink 5:
      Optimal Phase: 20
      Window Length: 34
      Eye Window: XXXX__________________________________XX
    Uplink 6:
      Optimal Phase: 21
      Window Length: 34
      Eye Window: XXXXX__________________________________X
    Uplink 7:
      Optimal Phase: 17
      Window Length: 34
      Eye Window: X__________________________________XXXXX
    Uplink 8:
      Optimal Phase: 4
      Window Length: 35
      Eye Window: ______________________XXXXX_____________
    Uplink 9:
      Optimal Phase: 8
      Window Length: 35
      Eye Window: __________________________XXXXX_________
    Uplink 10:
      Optimal Phase: 10
      Window Length: 35
      Eye Window: ____________________________XXXXX_______
    Uplink 11:
      Optimal Phase: 13
      Window Length: 35
      Eye Window: _______________________________XXXXX____
    Uplink 12:
      Optimal Phase: 9
      Window Length: 34
      Eye Window: ___________________________XXXXXX_______
    Uplink 13:
      Optimal Phase: 12
      Window Length: 34
      Eye Window: ______________________________XXXXXX____
    Uplink 14:
      Optimal Phase: 11
      Window Length: 35
      Eye Window: _____________________________XXXXX______
    Uplink 15:
      Optimal Phase: 13
      Window Length: 34
      Eye Window: _______________________________XXXXXX___

09:21:14:setup_element:INFO:	Performing Elink synchronization
09:21:14:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
09:21:14:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [1]
09:21:14:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [1]
09:21:14:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [1]
09:21:14:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 1
09:21:14:uplink:INFO:	Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
09:21:14:ST3_emu:INFO:	Number of chips: 8
addr  |  upli  |  dwnli  |  grp |  uplinks | uplinks_map
   0  |   [0]   |  1  |  0  |     [1]      |   [(0, 1), (1, 0)] 
   1  |   [0]   |  1  |  0  |     [8]      |   [(0, 8), (1, 9)] 
   2  |   [0]   |  1  |  0  |     [3]      |   [(0, 3), (1, 2)] 
   3  |   [0]   |  1  |  0  |     [10]     |  [(0, 10), (1, 11)]
   4  |   [0]   |  1  |  0  |     [5]      |   [(0, 5), (1, 4)] 
   5  |   [0]   |  1  |  0  |     [12]     |  [(0, 12), (1, 13)]
   6  |   [0]   |  1  |  0  |     [7]      |   [(0, 7), (1, 6)] 
   7  |   [0]   |  1  |  0  |     [14]     |  [(0, 14), (1, 15)]
09:21:16:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
09:21:16:febtest:INFO:	0-0 | XA-000-08-002-000-001-040-13 |  25.1 | 1218.6
09:21:16:febtest:INFO:	0-1 | XA-000-08-001-064-048-160-14 |  34.6 | 1189.2
09:21:16:febtest:INFO:	0-2 | XA-000-08-001-064-049-064-02 |  28.2 | 1212.7
09:21:17:febtest:INFO:	0-3 | XA-000-08-001-064-048-176-09 |  34.6 | 1183.3
09:21:17:febtest:INFO:	0-4 | XA-000-08-001-064-049-008-07 |   9.3 | 1277.1
09:21:17:febtest:INFO:	0-5 | XA-000-08-001-064-049-040-09 |  37.7 | 1165.6
09:21:17:febtest:INFO:	0-6 | XA-000-08-001-064-049-032-09 |  47.3 | 1141.9
09:21:17:febtest:INFO:	0-7 | XA-000-08-001-064-049-056-14 |  31.4 | 1195.1
09:21:18:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
09:21:21:ST3_smx:INFO:	chip: 0-0 	 31.389742 C 	 1206.851500 mV
09:21:21:ST3_smx:INFO:		Electrons
09:21:21:ST3_smx:INFO:	# loops 0
09:21:23:ST3_smx:INFO:	# loops 1
09:21:25:ST3_smx:INFO:	# loops 2
09:21:26:ST3_smx:INFO:	# loops 3
09:21:28:ST3_smx:INFO:	# loops 4
09:21:29:ST3_smx:INFO:	Total # of broken channels: 0
09:21:29:ST3_smx:INFO:	List of broken channels: []
09:21:29:ST3_smx:INFO:	Total # of broken channels: 0
09:21:29:ST3_smx:INFO:	List of broken channels: []
09:21:30:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
09:21:33:ST3_smx:INFO:	chip: 0-1 	 34.556970 C 	 1183.292940 mV
09:21:33:ST3_smx:INFO:		Electrons
09:21:33:ST3_smx:INFO:	# loops 0
09:21:35:ST3_smx:INFO:	# loops 1
09:21:37:ST3_smx:INFO:	# loops 2
09:21:38:ST3_smx:INFO:	# loops 3
09:21:40:ST3_smx:INFO:	# loops 4
09:21:41:ST3_smx:INFO:	Total # of broken channels: 0
09:21:41:ST3_smx:INFO:	List of broken channels: []
09:21:41:ST3_smx:INFO:	Total # of broken channels: 0
09:21:41:ST3_smx:INFO:	List of broken channels: []
09:21:42:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
09:21:45:ST3_smx:INFO:	chip: 0-2 	 28.225000 C 	 1218.600960 mV
09:21:45:ST3_smx:INFO:		Electrons
09:21:45:ST3_smx:INFO:	# loops 0
09:21:47:ST3_smx:INFO:	# loops 1
09:21:48:ST3_smx:INFO:	# loops 2
09:21:50:ST3_smx:INFO:	# loops 3
09:21:52:ST3_smx:INFO:	# loops 4
09:21:53:ST3_smx:INFO:	Total # of broken channels: 0
09:21:53:ST3_smx:INFO:	List of broken channels: []
09:21:53:ST3_smx:INFO:	Total # of broken channels: 0
09:21:53:ST3_smx:INFO:	List of broken channels: []
09:21:54:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
09:21:57:ST3_smx:INFO:	chip: 0-3 	 31.389742 C 	 1200.969315 mV
09:21:57:ST3_smx:INFO:		Electrons
09:21:57:ST3_smx:INFO:	# loops 0
09:21:59:ST3_smx:INFO:	# loops 1
09:22:00:ST3_smx:INFO:	# loops 2
09:22:02:ST3_smx:INFO:	# loops 3
09:22:03:ST3_smx:INFO:	# loops 4
09:22:05:ST3_smx:INFO:	Total # of broken channels: 0
09:22:05:ST3_smx:INFO:	List of broken channels: []
09:22:05:ST3_smx:INFO:	Total # of broken channels: 0
09:22:05:ST3_smx:INFO:	List of broken channels: []
09:22:05:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
09:22:09:ST3_smx:INFO:	chip: 0-4 	 15.590880 C 	 1253.730060 mV
09:22:09:ST3_smx:INFO:		Electrons
09:22:09:ST3_smx:INFO:	# loops 0
09:22:11:ST3_smx:INFO:	# loops 1
09:22:12:ST3_smx:INFO:	# loops 2
09:22:14:ST3_smx:INFO:	# loops 3
09:22:15:ST3_smx:INFO:	# loops 4
09:22:17:ST3_smx:INFO:	Total # of broken channels: 0
09:22:17:ST3_smx:INFO:	List of broken channels: []
09:22:17:ST3_smx:INFO:	Total # of broken channels: 0
09:22:17:ST3_smx:INFO:	List of broken channels: []
09:22:17:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
09:22:21:ST3_smx:INFO:	chip: 0-5 	 40.898880 C 	 1159.654860 mV
09:22:21:ST3_smx:INFO:		Electrons
09:22:21:ST3_smx:INFO:	# loops 0
09:22:23:ST3_smx:INFO:	# loops 1
09:22:24:ST3_smx:INFO:	# loops 2
09:22:26:ST3_smx:INFO:	# loops 3
09:22:27:ST3_smx:INFO:	# loops 4
09:22:29:ST3_smx:INFO:	Total # of broken channels: 0
09:22:29:ST3_smx:INFO:	List of broken channels: []
09:22:29:ST3_smx:INFO:	Total # of broken channels: 0
09:22:29:ST3_smx:INFO:	List of broken channels: []
09:22:29:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
09:22:33:ST3_smx:INFO:	chip: 0-6 	 44.073563 C 	 1159.654860 mV
09:22:33:ST3_smx:INFO:		Electrons
09:22:33:ST3_smx:INFO:	# loops 0
09:22:34:ST3_smx:INFO:	# loops 1
09:22:36:ST3_smx:INFO:	# loops 2
09:22:38:ST3_smx:INFO:	# loops 3
09:22:39:ST3_smx:INFO:	# loops 4
09:22:41:ST3_smx:INFO:	Total # of broken channels: 0
09:22:41:ST3_smx:INFO:	List of broken channels: []
09:22:41:ST3_smx:INFO:	Total # of broken channels: 0
09:22:41:ST3_smx:INFO:	List of broken channels: []
09:22:41:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
09:22:45:ST3_smx:INFO:	chip: 0-7 	 40.898880 C 	 1171.483840 mV
09:22:45:ST3_smx:INFO:		Electrons
09:22:45:ST3_smx:INFO:	# loops 0
09:22:47:ST3_smx:INFO:	# loops 1
09:22:48:ST3_smx:INFO:	# loops 2
09:22:50:ST3_smx:INFO:	# loops 3
09:22:51:ST3_smx:INFO:	# loops 4
09:22:53:ST3_smx:INFO:	Total # of broken channels: 0
09:22:53:ST3_smx:INFO:	List of broken channels: []
09:22:53:ST3_smx:INFO:	Total # of broken channels: 2
09:22:53:ST3_smx:INFO:	List of broken channels: [27, 29]
09:22:54:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
09:22:54:febtest:INFO:	0-0 | XA-000-08-002-000-001-040-13 |  31.4 | 1201.0
09:22:54:febtest:INFO:	0-1 | XA-000-08-001-064-048-160-14 |  37.7 | 1183.3
09:22:54:febtest:INFO:	0-2 | XA-000-08-001-064-049-064-02 |  28.2 | 1218.6
09:22:54:febtest:INFO:	0-3 | XA-000-08-001-064-048-176-09 |  31.4 | 1201.0
09:22:55:febtest:INFO:	0-4 | XA-000-08-001-064-049-008-07 |  18.7 | 1253.7
09:22:55:febtest:INFO:	0-5 | XA-000-08-001-064-049-040-09 |  40.9 | 1159.7
09:22:55:febtest:INFO:	0-6 | XA-000-08-001-064-049-032-09 |  44.1 | 1159.7
09:22:55:febtest:INFO:	0-7 | XA-000-08-001-064-049-056-14 |  40.9 | 1171.5
############################################################
#                   S U M M A R Y                          #
############################################################
TEST_NAME : FEB-Sensor
TEST_DATE : 2023_11_29-09_21_00
OPERATOR  : Kerstin S.; 
SITE      : GSI
SETUP     : GSI_TEST_SETUP_1
Set-ID    : 
---------------------------------------
MODULE_NAME : L3DL500114 M3DL5T2001142A2 124 C

FEB_SN : 2014
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
SENSOR_ID:	
MODULE_NAME:	L3DL500114 M3DL5T2001142A2 124 C

MODULE_TYPE:	PB
MODULE_LADDER:	
MODULE_MODULE:	
MODULE_SIZE:	0
MODULE_GRADE:	
---------------------------------------
VI_before_Init : ['2.450', '1.8680', '1.851', '0.4294', '7.000', '1.5530', '7.000', '1.5530']
VI_after__Init : ['2.450', '2.0020', '1.850', '0.4960', '7.000', '1.5530', '7.000', '1.5530']
VI_at__the_End : ['0', '0', '0', '0', '0', '0']
09:23:05:ST3_Shared:INFO:	/home/cbm/public_html/Production_LogDir//FEB/FEB_1041/TestDate_2023_11_29-09_21_00/
11:09:05:ST3_Shared:INFO:	Listo of operators:Alois Alzheimer
11:09:06:ST3_Shared:INFO:	Listo of operators:Oleksandr S.; 
11:11:05:febtest:INFO:	FEB 8-2 B @ GSI
11:11:30:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
11:11:30:ST3_Shared:INFO:	-----------------------FEB-Microcable-----------------------
11:11:30:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
11:11:30:febtest:INFO:	Tsting FEB with SN 2081
11:11:31:smx_tester:INFO:	Scanning setup
11:11:31:elinks:INFO:	Disabling clock on downlink 0
11:11:31:elinks:INFO:	Disabling clock on downlink 1
11:11:31:elinks:INFO:	Disabling clock on downlink 2
11:11:31:elinks:INFO:	Disabling clock on downlink 3
11:11:31:elinks:INFO:	Disabling clock on downlink 4
11:11:31:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:11:31:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
11:11:31:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:11:32:elinks:INFO:	Disabling clock on downlink 0
11:11:32:elinks:INFO:	Disabling clock on downlink 1
11:11:32:elinks:INFO:	Disabling clock on downlink 2
11:11:32:elinks:INFO:	Disabling clock on downlink 3
11:11:32:elinks:INFO:	Disabling clock on downlink 4
11:11:32:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:11:32:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
11:11:32:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:11:32:elinks:INFO:	Disabling clock on downlink 0
11:11:32:elinks:INFO:	Disabling clock on downlink 1
11:11:32:elinks:INFO:	Disabling clock on downlink 2
11:11:32:elinks:INFO:	Disabling clock on downlink 3
11:11:32:elinks:INFO:	Disabling clock on downlink 4
11:11:32:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:11:32:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 16
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 17
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 18
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 19
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 20
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 21
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 22
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 23
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 24
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 25
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 26
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 27
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 28
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 29
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 30
11:11:32:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 31
11:11:32:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:11:32:elinks:INFO:	Disabling clock on downlink 0
11:11:32:elinks:INFO:	Disabling clock on downlink 1
11:11:32:elinks:INFO:	Disabling clock on downlink 2
11:11:32:elinks:INFO:	Disabling clock on downlink 3
11:11:32:elinks:INFO:	Disabling clock on downlink 4
11:11:32:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:11:32:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
11:11:32:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:11:32:elinks:INFO:	Disabling clock on downlink 0
11:11:32:elinks:INFO:	Disabling clock on downlink 1
11:11:32:elinks:INFO:	Disabling clock on downlink 2
11:11:32:elinks:INFO:	Disabling clock on downlink 3
11:11:32:elinks:INFO:	Disabling clock on downlink 4
11:11:32:setup_element:INFO:	Checking SOS, encoding_mode: SOS
11:11:32:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
11:11:32:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
11:11:32:setup_element:INFO:	Scanning clock phase
11:11:32:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
11:11:32:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
11:11:33:setup_element:INFO:	Clock phase scan results for group 0, downlink 2
11:11:33:setup_element:INFO:	Eye window for uplink 16: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 17: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 18: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 19: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 20: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 21: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 22: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 23: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 24: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 25: _______________________________________________________________________XXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 26: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 27: ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 28: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 29: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
11:11:33:setup_element:INFO:	Eye window for uplink 30: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
11:11:33:setup_element:INFO:	Eye window for uplink 31: ________________________________________________________________________XXXXXXXX
Clock Delay: 35
11:11:33:setup_element:INFO:	Setting the clock phase to 34 for group 0, downlink 2
11:11:33:setup_element:INFO:	Scanning data phases
11:11:33:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
11:11:33:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
11:11:38:setup_element:INFO:	Data phase scan results for group 0, downlink 2
11:11:38:setup_element:INFO:	Eye window for uplink 16: XX____________________________________XX
Data delay found: 19
11:11:38:setup_element:INFO:	Eye window for uplink 17: __________________________________XXXX__
Data delay found: 15
11:11:38:setup_element:INFO:	Eye window for uplink 18: XX__________________________________XXXX
Data delay found: 18
11:11:38:setup_element:INFO:	Eye window for uplink 19: __________________________________XXXX__
Data delay found: 15
11:11:38:setup_element:INFO:	Eye window for uplink 20: X___________________________________XXXX
Data delay found: 18
11:11:38:setup_element:INFO:	Eye window for uplink 21: ___________________________________XXXXX
Data delay found: 17
11:11:38:setup_element:INFO:	Eye window for uplink 22: XX__________________________________XXXX
Data delay found: 18
11:11:38:setup_element:INFO:	Eye window for uplink 23: __________________________________XXXX__
Data delay found: 15
11:11:38:setup_element:INFO:	Eye window for uplink 24: _______XXXXXX___________________________
Data delay found: 29
11:11:38:setup_element:INFO:	Eye window for uplink 25: __________XXXXX_________________________
Data delay found: 32
11:11:38:setup_element:INFO:	Eye window for uplink 26: _____XXXXX______________________________
Data delay found: 27
11:11:38:setup_element:INFO:	Eye window for uplink 27: _________XXXXX__________________________
Data delay found: 31
11:11:38:setup_element:INFO:	Eye window for uplink 28: ____________XXXXX_______________________
Data delay found: 34
11:11:38:setup_element:INFO:	Eye window for uplink 29: _____________XXXXX______________________
Data delay found: 35
11:11:38:setup_element:INFO:	Eye window for uplink 30: ________________XXXXXX__________________
Data delay found: 38
11:11:38:setup_element:INFO:	Eye window for uplink 31: ______________XXXXX_X___________________
Data delay found: 37
11:11:38:setup_element:INFO:	Setting the data phase to 19 for uplink 16
11:11:38:setup_element:INFO:	Setting the data phase to 15 for uplink 17
11:11:38:setup_element:INFO:	Setting the data phase to 18 for uplink 18
11:11:38:setup_element:INFO:	Setting the data phase to 15 for uplink 19
11:11:38:setup_element:INFO:	Setting the data phase to 18 for uplink 20
11:11:38:setup_element:INFO:	Setting the data phase to 17 for uplink 21
11:11:38:setup_element:INFO:	Setting the data phase to 18 for uplink 22
11:11:38:setup_element:INFO:	Setting the data phase to 15 for uplink 23
11:11:38:setup_element:INFO:	Setting the data phase to 29 for uplink 24
11:11:38:setup_element:INFO:	Setting the data phase to 32 for uplink 25
11:11:38:setup_element:INFO:	Setting the data phase to 27 for uplink 26
11:11:38:setup_element:INFO:	Setting the data phase to 31 for uplink 27
11:11:38:setup_element:INFO:	Setting the data phase to 34 for uplink 28
11:11:38:setup_element:INFO:	Setting the data phase to 35 for uplink 29
11:11:38:setup_element:INFO:	Setting the data phase to 38 for uplink 30
11:11:38:setup_element:INFO:	Setting the data phase to 37 for uplink 31
11:11:38:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 2
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 34
    Window Length: 70
    Eye Windows:
      Uplink 16: _______________________________________________________________________XXXXXXXX_
      Uplink 17: _______________________________________________________________________XXXXXXXX_
      Uplink 18: _______________________________________________________________________XXXXXXXX_
      Uplink 19: _______________________________________________________________________XXXXXXXX_
      Uplink 20: _______________________________________________________________________XXXXXXXX_
      Uplink 21: _______________________________________________________________________XXXXXXXX_
      Uplink 22: ______________________________________________________________________XXXXXXXXX_
      Uplink 23: ______________________________________________________________________XXXXXXXXX_
      Uplink 24: _______________________________________________________________________XXXXXXXX_
      Uplink 25: _______________________________________________________________________XXXXXXXX_
      Uplink 26: ______________________________________________________________________XXXXXXXXX_
      Uplink 27: ______________________________________________________________________XXXXXXXXX_
      Uplink 28: _______________________________________________________________________XXXXXXX__
      Uplink 29: _______________________________________________________________________XXXXXXX__
      Uplink 30: ________________________________________________________________________XXXXXXXX
      Uplink 31: ________________________________________________________________________XXXXXXXX
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 19
      Window Length: 36
      Eye Window: XX____________________________________XX
    Uplink 17:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 18:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 19:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 20:
      Optimal Phase: 18
      Window Length: 35
      Eye Window: X___________________________________XXXX
    Uplink 21:
      Optimal Phase: 17
      Window Length: 35
      Eye Window: ___________________________________XXXXX
    Uplink 22:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 23:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 24:
      Optimal Phase: 29
      Window Length: 34
      Eye Window: _______XXXXXX___________________________
    Uplink 25:
      Optimal Phase: 32
      Window Length: 35
      Eye Window: __________XXXXX_________________________
    Uplink 26:
      Optimal Phase: 27
      Window Length: 35
      Eye Window: _____XXXXX______________________________
    Uplink 27:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 28:
      Optimal Phase: 34
      Window Length: 35
      Eye Window: ____________XXXXX_______________________
    Uplink 29:
      Optimal Phase: 35
      Window Length: 35
      Eye Window: _____________XXXXX______________________
    Uplink 30:
      Optimal Phase: 38
      Window Length: 34
      Eye Window: ________________XXXXXX__________________
    Uplink 31:
      Optimal Phase: 37
      Window Length: 33
      Eye Window: ______________XXXXX_X___________________
]
11:11:38:setup_element:INFO:	Beginning SMX ASICs map scan
11:11:38:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
11:11:38:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
11:11:38:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [2]
11:11:38:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [2]
11:11:38:uplink:INFO:	Setting uplinks mask [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
11:11:38:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 0, uplink 23
11:11:39:setup_element:INFO:	Adding ASIC 0x0, ASIC uplink 1, uplink 22
11:11:39:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 30
11:11:39:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 31
11:11:39:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 0, uplink 21
11:11:39:setup_element:INFO:	Adding ASIC 0x2, ASIC uplink 1, uplink 20
11:11:39:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 28
11:11:39:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 29
11:11:39:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 0, uplink 19
11:11:39:setup_element:INFO:	Adding ASIC 0x4, ASIC uplink 1, uplink 18
11:11:39:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 26
11:11:39:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 27
11:11:40:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 0, uplink 17
11:11:40:setup_element:INFO:	Adding ASIC 0x6, ASIC uplink 1, uplink 16
11:11:40:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 24
11:11:40:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 25
11:11:41:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 2
  Uplinks: [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x0: (ASIC uplink, uplink): (0, 23), (1, 22)
    ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
    ASIC address 0x2: (ASIC uplink, uplink): (0, 21), (1, 20)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x4: (ASIC uplink, uplink): (0, 19), (1, 18)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x6: (ASIC uplink, uplink): (0, 17), (1, 16)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
  Clock Phase Characteristic:
    Optimal Phase: 34
    Window Length: 70
    Eye Windows:
      Uplink 16: _______________________________________________________________________XXXXXXXX_
      Uplink 17: _______________________________________________________________________XXXXXXXX_
      Uplink 18: _______________________________________________________________________XXXXXXXX_
      Uplink 19: _______________________________________________________________________XXXXXXXX_
      Uplink 20: _______________________________________________________________________XXXXXXXX_
      Uplink 21: _______________________________________________________________________XXXXXXXX_
      Uplink 22: ______________________________________________________________________XXXXXXXXX_
      Uplink 23: ______________________________________________________________________XXXXXXXXX_
      Uplink 24: _______________________________________________________________________XXXXXXXX_
      Uplink 25: _______________________________________________________________________XXXXXXXX_
      Uplink 26: ______________________________________________________________________XXXXXXXXX_
      Uplink 27: ______________________________________________________________________XXXXXXXXX_
      Uplink 28: _______________________________________________________________________XXXXXXX__
      Uplink 29: _______________________________________________________________________XXXXXXX__
      Uplink 30: ________________________________________________________________________XXXXXXXX
      Uplink 31: ________________________________________________________________________XXXXXXXX
  Data phase characteristics:
    Uplink 16:
      Optimal Phase: 19
      Window Length: 36
      Eye Window: XX____________________________________XX
    Uplink 17:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 18:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 19:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 20:
      Optimal Phase: 18
      Window Length: 35
      Eye Window: X___________________________________XXXX
    Uplink 21:
      Optimal Phase: 17
      Window Length: 35
      Eye Window: ___________________________________XXXXX
    Uplink 22:
      Optimal Phase: 18
      Window Length: 34
      Eye Window: XX__________________________________XXXX
    Uplink 23:
      Optimal Phase: 15
      Window Length: 36
      Eye Window: __________________________________XXXX__
    Uplink 24:
      Optimal Phase: 29
      Window Length: 34
      Eye Window: _______XXXXXX___________________________
    Uplink 25:
      Optimal Phase: 32
      Window Length: 35
      Eye Window: __________XXXXX_________________________
    Uplink 26:
      Optimal Phase: 27
      Window Length: 35
      Eye Window: _____XXXXX______________________________
    Uplink 27:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 28:
      Optimal Phase: 34
      Window Length: 35
      Eye Window: ____________XXXXX_______________________
    Uplink 29:
      Optimal Phase: 35
      Window Length: 35
      Eye Window: _____________XXXXX______________________
    Uplink 30:
      Optimal Phase: 38
      Window Length: 34
      Eye Window: ________________XXXXXX__________________
    Uplink 31:
      Optimal Phase: 37
      Window Length: 33
      Eye Window: ______________XXXXX_X___________________

11:11:41:setup_element:INFO:	Performing Elink synchronization
11:11:41:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
11:11:41:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
11:11:41:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [2]
11:11:41:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [2]
11:11:41:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 2
11:11:41:uplink:INFO:	Enabling uplinks [16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]
11:11:41:ST3_emu:INFO:	Number of chips: 8
addr  |  upli  |  dwnli  |  grp |  uplinks | uplinks_map
   0  |   [0]   |  2  |  0  |     [23]     |  [(0, 23), (1, 22)]
   1  |   [0]   |  2  |  0  |     [30]     |  [(0, 30), (1, 31)]
   2  |   [0]   |  2  |  0  |     [21]     |  [(0, 21), (1, 20)]
   3  |   [0]   |  2  |  0  |     [28]     |  [(0, 28), (1, 29)]
   4  |   [0]   |  2  |  0  |     [19]     |  [(0, 19), (1, 18)]
   5  |   [0]   |  2  |  0  |     [26]     |  [(0, 26), (1, 27)]
   6  |   [0]   |  2  |  0  |     [17]     |  [(0, 17), (1, 16)]
   7  |   [0]   |  2  |  0  |     [24]     |  [(0, 24), (1, 25)]
11:11:42:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
11:11:42:febtest:INFO:	0-0 | XA-000-08-002-000-007-122-10 |  21.9 | 1212.7
11:11:43:febtest:INFO:	0-1 | XA-000-08-002-000-007-113-10 |  21.9 | 1206.9
11:11:43:febtest:INFO:	0-2 | XA-000-08-002-000-007-101-13 |  28.2 | 1183.3
11:11:43:febtest:INFO:	0-3 | XA-000-08-002-000-007-096-13 |  40.9 | 1147.8
11:11:43:febtest:INFO:	0-4 | XA-000-08-002-000-007-105-13 |  18.7 | 1224.5
11:11:44:febtest:INFO:	0-5 | XA-000-08-002-000-007-106-13 |  44.1 | 1130.0
11:11:44:febtest:INFO:	0-6 | XA-000-08-002-000-007-110-13 |   6.1 | 1265.4
11:11:44:febtest:INFO:	0-7 | XA-000-08-002-000-008-163-06 |  31.4 | 1165.6
11:11:44:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:11:48:ST3_smx:INFO:	chip: 0-0 	 18.745682 C 	 1230.330540 mV
11:11:48:ST3_smx:INFO:		Electrons
11:11:48:ST3_smx:INFO:	# loops 0
11:11:50:ST3_smx:INFO:	# loops 1
11:11:51:ST3_smx:INFO:	# loops 2
11:11:53:ST3_smx:INFO:	# loops 3
11:11:54:ST3_smx:INFO:	# loops 4
11:11:56:ST3_smx:INFO:	Total # of broken channels: 0
11:11:56:ST3_smx:INFO:	List of broken channels: []
11:11:56:ST3_smx:INFO:	Total # of broken channels: 0
11:11:56:ST3_smx:INFO:	List of broken channels: []
11:11:56:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:12:00:ST3_smx:INFO:	chip: 0-1 	 28.225000 C 	 1183.292940 mV
11:12:00:ST3_smx:INFO:		Electrons
11:12:00:ST3_smx:INFO:	# loops 0
11:12:01:ST3_smx:INFO:	# loops 1
11:12:03:ST3_smx:INFO:	# loops 2
11:12:04:ST3_smx:INFO:	# loops 3
11:12:06:ST3_smx:INFO:	# loops 4
11:12:07:ST3_smx:INFO:	Total # of broken channels: 0
11:12:07:ST3_smx:INFO:	List of broken channels: []
11:12:07:ST3_smx:INFO:	Total # of broken channels: 0
11:12:07:ST3_smx:INFO:	List of broken channels: []
11:12:08:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:12:11:ST3_smx:INFO:	chip: 0-2 	 34.556970 C 	 1183.292940 mV
11:12:11:ST3_smx:INFO:		Electrons
11:12:12:ST3_smx:INFO:	# loops 0
11:12:13:ST3_smx:INFO:	# loops 1
11:12:15:ST3_smx:INFO:	# loops 2
11:12:16:ST3_smx:INFO:	# loops 3
11:12:18:ST3_smx:INFO:	# loops 4
11:12:19:ST3_smx:INFO:	Total # of broken channels: 0
11:12:19:ST3_smx:INFO:	List of broken channels: []
11:12:19:ST3_smx:INFO:	Total # of broken channels: 0
11:12:19:ST3_smx:INFO:	List of broken channels: []
11:12:20:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:12:24:ST3_smx:INFO:	chip: 0-3 	 40.898880 C 	 1153.732915 mV
11:12:24:ST3_smx:INFO:		Electrons
11:12:24:ST3_smx:INFO:	# loops 0
11:12:25:ST3_smx:INFO:	# loops 1
11:12:27:ST3_smx:INFO:	# loops 2
11:12:28:ST3_smx:INFO:	# loops 3
11:12:30:ST3_smx:INFO:	# loops 4
11:12:31:ST3_smx:INFO:	Total # of broken channels: 0
11:12:31:ST3_smx:INFO:	List of broken channels: []
11:12:31:ST3_smx:INFO:	Total # of broken channels: 0
11:12:31:ST3_smx:INFO:	List of broken channels: []
11:12:32:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:12:36:ST3_smx:INFO:	chip: 0-4 	 21.902970 C 	 1224.468235 mV
11:12:36:ST3_smx:INFO:		Electrons
11:12:36:ST3_smx:INFO:	# loops 0
11:12:37:ST3_smx:INFO:	# loops 1
11:12:39:ST3_smx:INFO:	# loops 2
11:12:41:ST3_smx:INFO:	# loops 3
11:12:42:ST3_smx:INFO:	# loops 4
11:12:44:ST3_smx:INFO:	Total # of broken channels: 0
11:12:44:ST3_smx:INFO:	List of broken channels: []
11:12:44:ST3_smx:INFO:	Total # of broken channels: 0
11:12:44:ST3_smx:INFO:	List of broken channels: []
11:12:44:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:12:48:ST3_smx:INFO:	chip: 0-5 	 44.073563 C 	 1147.806000 mV
11:12:48:ST3_smx:INFO:		Electrons
11:12:48:ST3_smx:INFO:	# loops 0
11:12:50:ST3_smx:INFO:	# loops 1
11:12:52:ST3_smx:INFO:	# loops 2
11:12:53:ST3_smx:INFO:	# loops 3
11:12:55:ST3_smx:INFO:	# loops 4
11:12:56:ST3_smx:INFO:	Total # of broken channels: 0
11:12:56:ST3_smx:INFO:	List of broken channels: []
11:12:56:ST3_smx:INFO:	Total # of broken channels: 0
11:12:56:ST3_smx:INFO:	List of broken channels: []
11:12:57:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:13:01:ST3_smx:INFO:	chip: 0-6 	 15.590880 C 	 1247.887635 mV
11:13:01:ST3_smx:INFO:		Electrons
11:13:01:ST3_smx:INFO:	# loops 0
11:13:02:ST3_smx:INFO:	# loops 1
11:13:04:ST3_smx:INFO:	# loops 2
11:13:05:ST3_smx:INFO:	# loops 3
11:13:07:ST3_smx:INFO:	# loops 4
11:13:08:ST3_smx:INFO:	Total # of broken channels: 0
11:13:08:ST3_smx:INFO:	List of broken channels: []
11:13:08:ST3_smx:INFO:	Total # of broken channels: 0
11:13:08:ST3_smx:INFO:	List of broken channels: []
11:13:09:ST3_smx:INFO:	PROCESS 1: Configuring AFE with typical values
11:13:13:ST3_smx:INFO:	chip: 0-7 	 40.898880 C 	 1147.806000 mV
11:13:13:ST3_smx:INFO:		Electrons
11:13:13:ST3_smx:INFO:	# loops 0
11:13:14:ST3_smx:INFO:	# loops 1
11:13:16:ST3_smx:INFO:	# loops 2
11:13:17:ST3_smx:INFO:	# loops 3
11:13:19:ST3_smx:INFO:	# loops 4
11:13:20:ST3_smx:INFO:	Total # of broken channels: 0
11:13:20:ST3_smx:INFO:	List of broken channels: []
11:13:20:ST3_smx:INFO:	Total # of broken channels: 0
11:13:20:ST3_smx:INFO:	List of broken channels: []
11:13:21:febtest:INFO:	 Add. | ASIC-ID                      | T [C] | Vddm [mV]
11:13:21:febtest:INFO:	0-0 | XA-000-08-002-000-007-122-10 |  21.9 | 1230.3
11:13:21:febtest:INFO:	0-1 | XA-000-08-002-000-007-113-10 |  31.4 | 1183.3
11:13:22:febtest:INFO:	0-2 | XA-000-08-002-000-007-101-13 |  34.6 | 1183.3
11:13:22:febtest:INFO:	0-3 | XA-000-08-002-000-007-096-13 |  44.1 | 1153.7
11:13:22:febtest:INFO:	0-4 | XA-000-08-002-000-007-105-13 |  21.9 | 1224.5
11:13:22:febtest:INFO:	0-5 | XA-000-08-002-000-007-106-13 |  44.1 | 1147.8
11:13:23:febtest:INFO:	0-6 | XA-000-08-002-000-007-110-13 |  15.6 | 1247.9
11:13:23:febtest:INFO:	0-7 | XA-000-08-002-000-008-163-06 |  40.9 | 1147.8
############################################################
#                   S U M M A R Y                          #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 2023_11_29-11_11_30
OPERATOR  : Oleksandr S.; 
SITE      : GSI
SETUP     : GSI_TEST_SETUP_1
Set-ID    : 
---------------------------------------
MODULE_NAME : L3DL500114 M3DL5T2001142A2 124 C

FEB_SN : 2014
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['2.447', '1.5870', '1.846', '2.0500', '7.000', '1.5470', '7.000', '1.5470']
VI_after__Init : ['2.450', '2.0020', '1.850', '0.4960', '7.000', '1.5530', '7.000', '1.5530']
VI_at__the_End : ['0', '0', '0', '0', '0', '0']
11:14:38:ST3_Shared:INFO:	/home/cbm/public_html/Production_LogDir//FEB/FEB_2081/TestDate_2023_11_29-11_11_30/