13:17:23:ST3_hmp4040:INFO:	ROHDE&SCHWARZ,HMP4040,123796,HW50020003/SW2.71
13:17:24:febtest:INFO:	FEB type: 8.2
13:17:24:febtest:INFO:	FEB SN: 2099
13:17:24:febtest:INFO:	FEB 8-2 selected
13:17:24:smx_tester:INFO:	Setting Elink clock mode to 160 MHz
13:17:26:ST3_Shared:INFO:	Listo of operators:Oleksandr S.; 
13:24:24:febtest:INFO:	FEB type: 8.2
13:24:24:febtest:INFO:	FEB SN: 2118
13:24:33:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:24:33:ST3_Shared:INFO:	-----------------------FEB-Microcable-----------------------
13:24:33:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:24:34:febtest:INFO:	Testing FEB with SN 2118
13:24:36:smx_tester:INFO:	Scanning setup
13:24:36:elinks:INFO:	Disabling clock on downlink 0
13:24:36:elinks:INFO:	Disabling clock on downlink 1
13:24:36:elinks:INFO:	Disabling clock on downlink 2
13:24:36:elinks:INFO:	Disabling clock on downlink 3
13:24:36:elinks:INFO:	Disabling clock on downlink 4
13:24:36:setup_element:INFO:	Checking SOS, encoding_mode: SOS
13:24:36:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
13:24:36:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
13:24:36:elinks:INFO:	Disabling clock on downlink 0
13:24:36:elinks:INFO:	Disabling clock on downlink 1
13:24:36:elinks:INFO:	Disabling clock on downlink 2
13:24:36:elinks:INFO:	Disabling clock on downlink 3
13:24:36:elinks:INFO:	Disabling clock on downlink 4
13:24:36:setup_element:INFO:	Checking SOS, encoding_mode: SOS
13:24:36:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
13:24:37:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
13:24:37:elinks:INFO:	Disabling clock on downlink 0
13:24:37:elinks:INFO:	Disabling clock on downlink 1
13:24:37:elinks:INFO:	Disabling clock on downlink 2
13:24:37:elinks:INFO:	Disabling clock on downlink 3
13:24:37:elinks:INFO:	Disabling clock on downlink 4
13:24:37:setup_element:INFO:	Checking SOS, encoding_mode: SOS
13:24:37:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
13:24:37:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 24
13:24:37:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 25
13:24:37:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 26
13:24:37:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 27
13:24:37:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 28
13:24:37:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 29
13:24:37:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 30
13:24:37:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 31
13:24:37:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
13:24:37:elinks:INFO:	Disabling clock on downlink 0
13:24:37:elinks:INFO:	Disabling clock on downlink 1
13:24:37:elinks:INFO:	Disabling clock on downlink 2
13:24:37:elinks:INFO:	Disabling clock on downlink 3
13:24:37:elinks:INFO:	Disabling clock on downlink 4
13:24:37:setup_element:INFO:	Checking SOS, encoding_mode: SOS
13:24:37:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
13:24:37:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
13:24:37:elinks:INFO:	Disabling clock on downlink 0
13:24:37:elinks:INFO:	Disabling clock on downlink 1
13:24:37:elinks:INFO:	Disabling clock on downlink 2
13:24:37:elinks:INFO:	Disabling clock on downlink 3
13:24:37:elinks:INFO:	Disabling clock on downlink 4
13:24:37:setup_element:INFO:	Checking SOS, encoding_mode: SOS
13:24:37:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
13:24:37:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
13:24:37:setup_element:INFO:	Scanning clock phase
13:24:37:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
13:24:37:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:24:37:setup_element:INFO:	Clock phase scan results for group 0, downlink 2
13:24:37:setup_element:INFO:	Eye window for uplink 24: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
13:24:37:setup_element:INFO:	Eye window for uplink 25: _____________________________________________________________________XXXXXXXXX__
Clock Delay: 33
13:24:37:setup_element:INFO:	Eye window for uplink 26: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:24:37:setup_element:INFO:	Eye window for uplink 27: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
13:24:37:setup_element:INFO:	Eye window for uplink 28: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:24:37:setup_element:INFO:	Eye window for uplink 29: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:24:37:setup_element:INFO:	Eye window for uplink 30: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:24:37:setup_element:INFO:	Eye window for uplink 31: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:24:37:setup_element:INFO:	Setting the clock phase to 33 for group 0, downlink 2
13:24:37:setup_element:INFO:	Scanning data phases
13:24:37:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
13:24:38:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:24:43:setup_element:INFO:	Data phase scan results for group 0, downlink 2
13:24:43:setup_element:INFO:	Eye window for uplink 24: _______XXXX_____________________________
Data delay found: 28
13:24:43:setup_element:INFO:	Eye window for uplink 25: __________XXXX__________________________
Data delay found: 31
13:24:43:setup_element:INFO:	Eye window for uplink 26: _______XXXXX____________________________
Data delay found: 29
13:24:43:setup_element:INFO:	Eye window for uplink 27: __________XXXXXX________________________
Data delay found: 32
13:24:43:setup_element:INFO:	Eye window for uplink 28: _______XXXXXX___________________________
Data delay found: 29
13:24:43:setup_element:INFO:	Eye window for uplink 29: _________XXXXXX_________________________
Data delay found: 31
13:24:43:setup_element:INFO:	Eye window for uplink 30: _________XXXXXXX________________________
Data delay found: 32
13:24:43:setup_element:INFO:	Eye window for uplink 31: ________XXXXXX__________________________
Data delay found: 30
13:24:43:setup_element:INFO:	Setting the data phase to 28 for uplink 24
13:24:43:setup_element:INFO:	Setting the data phase to 31 for uplink 25
13:24:43:setup_element:INFO:	Setting the data phase to 29 for uplink 26
13:24:43:setup_element:INFO:	Setting the data phase to 32 for uplink 27
13:24:43:setup_element:INFO:	Setting the data phase to 29 for uplink 28
13:24:43:setup_element:INFO:	Setting the data phase to 31 for uplink 29
13:24:43:setup_element:INFO:	Setting the data phase to 32 for uplink 30
13:24:43:setup_element:INFO:	Setting the data phase to 30 for uplink 31
13:24:43:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 2
  Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 33
    Window Length: 71
    Eye Windows:
      Uplink 24: _____________________________________________________________________XXXXXXXXX__
      Uplink 25: _____________________________________________________________________XXXXXXXXX__
      Uplink 26: ______________________________________________________________________XXXXXXXX__
      Uplink 27: ______________________________________________________________________XXXXXXXX__
      Uplink 28: _____________________________________________________________________XXXXXXXX___
      Uplink 29: _____________________________________________________________________XXXXXXXX___
      Uplink 30: _____________________________________________________________________XXXXXXXX___
      Uplink 31: _____________________________________________________________________XXXXXXXX___
  Data phase characteristics:
    Uplink 24:
      Optimal Phase: 28
      Window Length: 36
      Eye Window: _______XXXX_____________________________
    Uplink 25:
      Optimal Phase: 31
      Window Length: 36
      Eye Window: __________XXXX__________________________
    Uplink 26:
      Optimal Phase: 29
      Window Length: 35
      Eye Window: _______XXXXX____________________________
    Uplink 27:
      Optimal Phase: 32
      Window Length: 34
      Eye Window: __________XXXXXX________________________
    Uplink 28:
      Optimal Phase: 29
      Window Length: 34
      Eye Window: _______XXXXXX___________________________
    Uplink 29:
      Optimal Phase: 31
      Window Length: 34
      Eye Window: _________XXXXXX_________________________
    Uplink 30:
      Optimal Phase: 32
      Window Length: 33
      Eye Window: _________XXXXXXX________________________
    Uplink 31:
      Optimal Phase: 30
      Window Length: 34
      Eye Window: ________XXXXXX__________________________
]
13:24:43:setup_element:INFO:	Beginning SMX ASICs map scan
13:24:43:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
13:24:43:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:24:43:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [2]
13:24:43:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [2]
13:24:43:uplink:INFO:	Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
13:24:43:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 30
13:24:43:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 31
13:24:43:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 28
13:24:43:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 29
13:24:44:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 26
13:24:44:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 27
13:24:44:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 24
13:24:44:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 25
13:24:45:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 2
  Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
  Clock Phase Characteristic:
    Optimal Phase: 33
    Window Length: 71
    Eye Windows:
      Uplink 24: _____________________________________________________________________XXXXXXXXX__
      Uplink 25: _____________________________________________________________________XXXXXXXXX__
      Uplink 26: ______________________________________________________________________XXXXXXXX__
      Uplink 27: ______________________________________________________________________XXXXXXXX__
      Uplink 28: _____________________________________________________________________XXXXXXXX___
      Uplink 29: _____________________________________________________________________XXXXXXXX___
      Uplink 30: _____________________________________________________________________XXXXXXXX___
      Uplink 31: _____________________________________________________________________XXXXXXXX___
  Data phase characteristics:
    Uplink 24:
      Optimal Phase: 28
      Window Length: 36
      Eye Window: _______XXXX_____________________________
    Uplink 25:
      Optimal Phase: 31
      Window Length: 36
      Eye Window: __________XXXX__________________________
    Uplink 26:
      Optimal Phase: 29
      Window Length: 35
      Eye Window: _______XXXXX____________________________
    Uplink 27:
      Optimal Phase: 32
      Window Length: 34
      Eye Window: __________XXXXXX________________________
    Uplink 28:
      Optimal Phase: 29
      Window Length: 34
      Eye Window: _______XXXXXX___________________________
    Uplink 29:
      Optimal Phase: 31
      Window Length: 34
      Eye Window: _________XXXXXX_________________________
    Uplink 30:
      Optimal Phase: 32
      Window Length: 33
      Eye Window: _________XXXXXXX________________________
    Uplink 31:
      Optimal Phase: 30
      Window Length: 34
      Eye Window: ________XXXXXX__________________________

13:24:45:setup_element:INFO:	Performing Elink synchronization
13:24:45:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
13:24:45:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:24:46:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [2]
13:24:46:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [2]
13:24:46:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 2
13:24:46:uplink:INFO:	Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
13:24:46:ST3_emu:INFO:	Number of chips: 4
addr  |  upli  |  dwnli  |  grp |  uplinks | uplinks_map
   1  |   [0]   |  2  |  0  |     [30]     |  [(0, 30), (1, 31)]
   3  |   [0]   |  2  |  0  |     [28]     |  [(0, 28), (1, 29)]
   5  |   [0]   |  2  |  0  |     [26]     |  [(0, 26), (1, 27)]
   7  |   [0]   |  2  |  0  |     [24]     |  [(0, 24), (1, 25)]
FEB type: B FEB_A: 0 FEB_B: 1
13:24:46:febtest:ERROR:	HW addres 1 != 0
13:24:54:febtest:ERROR:	HW addres 3 != 1
13:24:56:febtest:ERROR:	HW addres 5 != 2
13:24:57:febtest:ERROR:	HW addres 7 != 3
13:24:58:febtest:INFO:	_Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:24:58:febtest:INFO:	30-01 | XA-000-08-002-000-000-246-08 |  44.1 | 1177.4
13:24:58:febtest:INFO:	28-03 | XA-000-08-002-000-000-245-08 |  40.9 | 1183.3
13:24:59:febtest:INFO:	26-05 | XA-000-08-002-000-003-069-05 |  31.4 | 1206.9
13:24:59:febtest:INFO:	24-07 | XA-000-08-002-000-000-239-15 |  50.4 | 1147.8
13:24:59:ST3_smx:INFO:	Configuring SMX FAST
13:25:01:ST3_smx:INFO:	chip: 30-1 	 50.430383 C 	 1147.806000 mV
13:25:01:ST3_smx:INFO:		Electrons
13:25:01:ST3_smx:INFO:	# loops 0
13:25:02:ST3_smx:INFO:	# loops 1
13:25:04:ST3_smx:INFO:	# loops 2
13:25:06:ST3_smx:INFO:	Total # of broken channels: 0
13:25:06:ST3_smx:INFO:	List of broken channels: []
13:25:06:ST3_smx:INFO:	Total # of broken channels: 0
13:25:06:ST3_smx:INFO:	List of broken channels: []
13:25:07:ST3_smx:INFO:	Configuring SMX FAST
13:25:09:ST3_smx:INFO:	chip: 28-3 	 44.073563 C 	 1171.483840 mV
13:25:09:ST3_smx:INFO:		Electrons
13:25:09:ST3_smx:INFO:	# loops 0
13:25:11:ST3_smx:INFO:	# loops 1
13:25:12:ST3_smx:INFO:	# loops 2
13:25:14:ST3_smx:INFO:	Total # of broken channels: 0
13:25:14:ST3_smx:INFO:	List of broken channels: []
13:25:14:ST3_smx:INFO:	Total # of broken channels: 0
13:25:14:ST3_smx:INFO:	List of broken channels: []
13:25:15:ST3_smx:INFO:	Configuring SMX FAST
13:25:17:ST3_smx:INFO:	chip: 26-5 	 37.726682 C 	 1183.292940 mV
13:25:17:ST3_smx:INFO:		Electrons
13:25:17:ST3_smx:INFO:	# loops 0
13:25:18:ST3_smx:INFO:	# loops 1
13:25:20:ST3_smx:INFO:	# loops 2
13:25:22:ST3_smx:INFO:	Total # of broken channels: 0
13:25:22:ST3_smx:INFO:	List of broken channels: []
13:25:22:ST3_smx:INFO:	Total # of broken channels: 0
13:25:22:ST3_smx:INFO:	List of broken channels: []
13:25:23:ST3_smx:INFO:	Configuring SMX FAST
13:25:25:ST3_smx:INFO:	chip: 24-7 	 44.073563 C 	 1171.483840 mV
13:25:25:ST3_smx:INFO:		Electrons
13:25:25:ST3_smx:INFO:	# loops 0
13:25:26:ST3_smx:INFO:	# loops 1
13:25:28:ST3_smx:INFO:	# loops 2
13:25:30:ST3_smx:INFO:	Total # of broken channels: 0
13:25:30:ST3_smx:INFO:	List of broken channels: []
13:25:30:ST3_smx:INFO:	Total # of broken channels: 0
13:25:30:ST3_smx:INFO:	List of broken channels: []
13:25:31:febtest:INFO:	_Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:25:31:febtest:INFO:	30-01 | XA-000-08-002-000-000-246-08 |  53.6 | 1147.8
13:25:31:febtest:INFO:	28-03 | XA-000-08-002-000-000-245-08 |  44.1 | 1171.5
13:25:31:febtest:INFO:	26-05 | XA-000-08-002-000-003-069-05 |  37.7 | 1183.3
13:25:31:febtest:INFO:	24-07 | XA-000-08-002-000-000-239-15 |  44.1 | 1171.5
############################################################
#                   S U M M A R Y                          #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_23-13_24_33
OPERATOR  : Oleksandr S.; 
SITE      : GSI
SETUP     : GSI_TEST_SETUP_1
Set-ID    : 
---------------------------------------
MODULE_NAME : 
FEB_SN : 2118
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '0.9693', '1.850', '1.2670']
VI_after__Init : ['0', '0', '0', '0', '0', '0']
VI_at__the_End : ['0', '0', '0', '0', '0', '0']
13:25:38:ST3_Shared:INFO:	cp -r tar/Production/ /home/cbm/public_html/tests/
13:31:56:febtest:INFO:	FEB type: 8.2
13:31:56:febtest:INFO:	FEB SN: 2117
13:31:59:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:31:59:ST3_Shared:INFO:	-----------------------FEB-Microcable-----------------------
13:31:59:ST3_Shared:INFO:	oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
13:31:59:febtest:INFO:	Testing FEB with SN 2117
13:32:02:smx_tester:INFO:	Scanning setup
13:32:02:elinks:INFO:	Disabling clock on downlink 0
13:32:02:elinks:INFO:	Disabling clock on downlink 1
13:32:02:elinks:INFO:	Disabling clock on downlink 2
13:32:02:elinks:INFO:	Disabling clock on downlink 3
13:32:02:elinks:INFO:	Disabling clock on downlink 4
13:32:02:setup_element:INFO:	Checking SOS, encoding_mode: SOS
13:32:02:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [0]
13:32:02:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
13:32:02:elinks:INFO:	Disabling clock on downlink 0
13:32:02:elinks:INFO:	Disabling clock on downlink 1
13:32:02:elinks:INFO:	Disabling clock on downlink 2
13:32:02:elinks:INFO:	Disabling clock on downlink 3
13:32:02:elinks:INFO:	Disabling clock on downlink 4
13:32:02:setup_element:INFO:	Checking SOS, encoding_mode: SOS
13:32:02:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [1]
13:32:02:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
13:32:02:elinks:INFO:	Disabling clock on downlink 0
13:32:02:elinks:INFO:	Disabling clock on downlink 1
13:32:02:elinks:INFO:	Disabling clock on downlink 2
13:32:02:elinks:INFO:	Disabling clock on downlink 3
13:32:02:elinks:INFO:	Disabling clock on downlink 4
13:32:02:setup_element:INFO:	Checking SOS, encoding_mode: SOS
13:32:02:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
13:32:02:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 24
13:32:02:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 25
13:32:02:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 26
13:32:02:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 27
13:32:02:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 28
13:32:02:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 29
13:32:02:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 30
13:32:02:setup_element:INFO:	SOS detected for group 0, downlink 2, uplink 31
13:32:02:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
13:32:02:elinks:INFO:	Disabling clock on downlink 0
13:32:02:elinks:INFO:	Disabling clock on downlink 1
13:32:02:elinks:INFO:	Disabling clock on downlink 2
13:32:02:elinks:INFO:	Disabling clock on downlink 3
13:32:02:elinks:INFO:	Disabling clock on downlink 4
13:32:02:setup_element:INFO:	Checking SOS, encoding_mode: SOS
13:32:02:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [3]
13:32:02:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
13:32:02:elinks:INFO:	Disabling clock on downlink 0
13:32:02:elinks:INFO:	Disabling clock on downlink 1
13:32:02:elinks:INFO:	Disabling clock on downlink 2
13:32:02:elinks:INFO:	Disabling clock on downlink 3
13:32:02:elinks:INFO:	Disabling clock on downlink 4
13:32:02:setup_element:INFO:	Checking SOS, encoding_mode: SOS
13:32:02:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [4]
13:32:03:setup_element:INFO:	Reassigning uplinks to uplinks which passed SOS detection
13:32:03:setup_element:INFO:	Scanning clock phase
13:32:03:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
13:32:03:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:32:03:setup_element:INFO:	Clock phase scan results for group 0, downlink 2
13:32:03:setup_element:INFO:	Eye window for uplink 24: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:32:03:setup_element:INFO:	Eye window for uplink 25: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:32:03:setup_element:INFO:	Eye window for uplink 26: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:32:03:setup_element:INFO:	Eye window for uplink 27: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:32:03:setup_element:INFO:	Eye window for uplink 28: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:32:03:setup_element:INFO:	Eye window for uplink 29: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
13:32:03:setup_element:INFO:	Eye window for uplink 30: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:32:03:setup_element:INFO:	Eye window for uplink 31: _______________________________________________________________________XXXXXXX__
Clock Delay: 34
13:32:03:setup_element:INFO:	Setting the clock phase to 33 for group 0, downlink 2
13:32:03:setup_element:INFO:	Scanning data phases
13:32:03:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
13:32:03:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:32:08:setup_element:INFO:	Data phase scan results for group 0, downlink 2
13:32:08:setup_element:INFO:	Eye window for uplink 24: _____XXXX_______________________________
Data delay found: 26
13:32:08:setup_element:INFO:	Eye window for uplink 25: _______XXXXX____________________________
Data delay found: 29
13:32:08:setup_element:INFO:	Eye window for uplink 26: ______XXXX______________________________
Data delay found: 27
13:32:08:setup_element:INFO:	Eye window for uplink 27: _________XXXXX__________________________
Data delay found: 31
13:32:08:setup_element:INFO:	Eye window for uplink 28: ___________XXXXX________________________
Data delay found: 33
13:32:08:setup_element:INFO:	Eye window for uplink 29: ____________XXXXXX______________________
Data delay found: 34
13:32:08:setup_element:INFO:	Eye window for uplink 30: _______________XXXXXX___________________
Data delay found: 37
13:32:08:setup_element:INFO:	Eye window for uplink 31: ______________XXXXX_X___________________
Data delay found: 37
13:32:08:setup_element:INFO:	Setting the data phase to 26 for uplink 24
13:32:08:setup_element:INFO:	Setting the data phase to 29 for uplink 25
13:32:08:setup_element:INFO:	Setting the data phase to 27 for uplink 26
13:32:08:setup_element:INFO:	Setting the data phase to 31 for uplink 27
13:32:08:setup_element:INFO:	Setting the data phase to 33 for uplink 28
13:32:08:setup_element:INFO:	Setting the data phase to 34 for uplink 29
13:32:08:setup_element:INFO:	Setting the data phase to 37 for uplink 30
13:32:08:setup_element:INFO:	Setting the data phase to 37 for uplink 31
13:32:08:ST3_emu:ERROR:	[
Setup Element:
  Group: 0
  Downlink: 2
  Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map: None
  Clock Phase Characteristic:
    Optimal Phase: 33
    Window Length: 71
    Eye Windows:
      Uplink 24: _____________________________________________________________________XXXXXXXX___
      Uplink 25: _____________________________________________________________________XXXXXXXX___
      Uplink 26: _____________________________________________________________________XXXXXXXX___
      Uplink 27: _____________________________________________________________________XXXXXXXX___
      Uplink 28: _____________________________________________________________________XXXXXXXX___
      Uplink 29: _____________________________________________________________________XXXXXXXX___
      Uplink 30: _______________________________________________________________________XXXXXXX__
      Uplink 31: _______________________________________________________________________XXXXXXX__
  Data phase characteristics:
    Uplink 24:
      Optimal Phase: 26
      Window Length: 36
      Eye Window: _____XXXX_______________________________
    Uplink 25:
      Optimal Phase: 29
      Window Length: 35
      Eye Window: _______XXXXX____________________________
    Uplink 26:
      Optimal Phase: 27
      Window Length: 36
      Eye Window: ______XXXX______________________________
    Uplink 27:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 28:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 29:
      Optimal Phase: 34
      Window Length: 34
      Eye Window: ____________XXXXXX______________________
    Uplink 30:
      Optimal Phase: 37
      Window Length: 34
      Eye Window: _______________XXXXXX___________________
    Uplink 31:
      Optimal Phase: 37
      Window Length: 33
      Eye Window: ______________XXXXX_X___________________
]
13:32:08:setup_element:INFO:	Beginning SMX ASICs map scan
13:32:08:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
13:32:08:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:32:08:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [2]
13:32:08:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [2]
13:32:08:uplink:INFO:	Setting uplinks mask [24, 25, 26, 27, 28, 29, 30, 31]
13:32:09:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 0, uplink 30
13:32:09:setup_element:INFO:	Adding ASIC 0x1, ASIC uplink 1, uplink 31
13:32:09:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 0, uplink 28
13:32:09:setup_element:INFO:	Adding ASIC 0x3, ASIC uplink 1, uplink 29
13:32:09:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 0, uplink 26
13:32:09:setup_element:INFO:	Adding ASIC 0x5, ASIC uplink 1, uplink 27
13:32:10:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 0, uplink 24
13:32:10:setup_element:INFO:	Adding ASIC 0x7, ASIC uplink 1, uplink 25
13:32:11:ST3_emu:ERROR:	
Setup Element:
  Group: 0
  Downlink: 2
  Uplinks: [24, 25, 26, 27, 28, 29, 30, 31]
  ASICs Map:
    ASIC address 0x1: (ASIC uplink, uplink): (0, 30), (1, 31)
    ASIC address 0x3: (ASIC uplink, uplink): (0, 28), (1, 29)
    ASIC address 0x5: (ASIC uplink, uplink): (0, 26), (1, 27)
    ASIC address 0x7: (ASIC uplink, uplink): (0, 24), (1, 25)
  Clock Phase Characteristic:
    Optimal Phase: 33
    Window Length: 71
    Eye Windows:
      Uplink 24: _____________________________________________________________________XXXXXXXX___
      Uplink 25: _____________________________________________________________________XXXXXXXX___
      Uplink 26: _____________________________________________________________________XXXXXXXX___
      Uplink 27: _____________________________________________________________________XXXXXXXX___
      Uplink 28: _____________________________________________________________________XXXXXXXX___
      Uplink 29: _____________________________________________________________________XXXXXXXX___
      Uplink 30: _______________________________________________________________________XXXXXXX__
      Uplink 31: _______________________________________________________________________XXXXXXX__
  Data phase characteristics:
    Uplink 24:
      Optimal Phase: 26
      Window Length: 36
      Eye Window: _____XXXX_______________________________
    Uplink 25:
      Optimal Phase: 29
      Window Length: 35
      Eye Window: _______XXXXX____________________________
    Uplink 26:
      Optimal Phase: 27
      Window Length: 36
      Eye Window: ______XXXX______________________________
    Uplink 27:
      Optimal Phase: 31
      Window Length: 35
      Eye Window: _________XXXXX__________________________
    Uplink 28:
      Optimal Phase: 33
      Window Length: 35
      Eye Window: ___________XXXXX________________________
    Uplink 29:
      Optimal Phase: 34
      Window Length: 34
      Eye Window: ____________XXXXXX______________________
    Uplink 30:
      Optimal Phase: 37
      Window Length: 34
      Eye Window: _______________XXXXXX___________________
    Uplink 31:
      Optimal Phase: 37
      Window Length: 33
      Eye Window: ______________XXXXX_X___________________

13:32:11:setup_element:INFO:	Performing Elink synchronization
13:32:11:master:INFO:	Setting encoding mode SOS for groups [0], downlinks [2]
13:32:11:master:INFO:	Setting encoding mode K.28.1 for groups [0], downlinks [2]
13:32:11:master:INFO:	Setting encoding mode EOS for groups [0], downlinks [2]
13:32:11:master:INFO:	Setting encoding mode FRAME for groups [0], downlinks [2]
13:32:11:setup_element:INFO:	Writing SMX Elink masks for group 0, downlink 2
13:32:11:uplink:INFO:	Enabling uplinks [24, 25, 26, 27, 28, 29, 30, 31]
13:32:11:ST3_emu:INFO:	Number of chips: 4
addr  |  upli  |  dwnli  |  grp |  uplinks | uplinks_map
   1  |   [0]   |  2  |  0  |     [30]     |  [(0, 30), (1, 31)]
   3  |   [0]   |  2  |  0  |     [28]     |  [(0, 28), (1, 29)]
   5  |   [0]   |  2  |  0  |     [26]     |  [(0, 26), (1, 27)]
   7  |   [0]   |  2  |  0  |     [24]     |  [(0, 24), (1, 25)]
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_1_30 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_1_30 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_1__upli_30
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_3_28 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_3_28 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_3__upli_28
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_5_26 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_5_26 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_5__upli_26
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_h_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: h2D_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_fastD_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_front_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hDist_back_e_7_24 (Potential memory leak).
TROOT::Append:0: RuntimeWarning: Replacing existing TH1: hBroken_e_7_24 (Potential memory leak).
TCanvas::Constructor:0: RuntimeWarning: Deleting canvas with same name: cDist_FEB_B__addr_7__upli_24
FEB type: B FEB_A: 0 FEB_B: 1
13:32:12:febtest:ERROR:	HW addres 1 != 0
13:32:20:febtest:ERROR:	HW addres 3 != 1
13:32:21:febtest:ERROR:	HW addres 5 != 2
13:32:22:febtest:ERROR:	HW addres 7 != 3
13:32:23:febtest:INFO:	_Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:32:23:febtest:INFO:	30-01 | XA-000-08-002-000-004-194-07 |  37.7 | 1183.3
13:32:24:febtest:INFO:	28-03 | XA-000-08-002-000-004-188-11 |  53.6 | 1135.9
13:32:24:febtest:INFO:	26-05 | XA-000-08-002-000-004-182-11 |  44.1 | 1165.6
13:32:24:febtest:INFO:	24-07 | XA-000-08-002-000-004-190-11 |  47.3 | 1141.9
13:32:24:ST3_smx:INFO:	Configuring SMX FAST
13:32:26:ST3_smx:INFO:	chip: 30-1 	 47.250730 C 	 1159.654860 mV
13:32:26:ST3_smx:INFO:		Electrons
13:32:26:ST3_smx:INFO:	# loops 0
13:32:28:ST3_smx:INFO:	# loops 1
13:32:29:ST3_smx:INFO:	# loops 2
13:32:31:ST3_smx:INFO:	Total # of broken channels: 0
13:32:31:ST3_smx:INFO:	List of broken channels: []
13:32:31:ST3_smx:INFO:	Total # of broken channels: 0
13:32:31:ST3_smx:INFO:	List of broken channels: []
13:32:32:ST3_smx:INFO:	Configuring SMX FAST
13:32:34:ST3_smx:INFO:	chip: 28-3 	 53.612520 C 	 1135.937260 mV
13:32:34:ST3_smx:INFO:		Electrons
13:32:34:ST3_smx:INFO:	# loops 0
13:32:36:ST3_smx:INFO:	# loops 1
13:32:37:ST3_smx:INFO:	# loops 2
13:32:39:ST3_smx:INFO:	Total # of broken channels: 0
13:32:39:ST3_smx:INFO:	List of broken channels: []
13:32:39:ST3_smx:INFO:	Total # of broken channels: 0
13:32:39:ST3_smx:INFO:	List of broken channels: []
13:32:40:ST3_smx:INFO:	Configuring SMX FAST
13:32:42:ST3_smx:INFO:	chip: 26-5 	 44.073563 C 	 1159.654860 mV
13:32:42:ST3_smx:INFO:		Electrons
13:32:42:ST3_smx:INFO:	# loops 0
13:32:44:ST3_smx:INFO:	# loops 1
13:32:45:ST3_smx:INFO:	# loops 2
13:32:47:ST3_smx:INFO:	Total # of broken channels: 0
13:32:47:ST3_smx:INFO:	List of broken channels: []
13:32:47:ST3_smx:INFO:	Total # of broken channels: 0
13:32:47:ST3_smx:INFO:	List of broken channels: []
13:32:48:ST3_smx:INFO:	Configuring SMX FAST
13:32:50:ST3_smx:INFO:	chip: 24-7 	 44.073563 C 	 1165.571835 mV
13:32:50:ST3_smx:INFO:		Electrons
13:32:50:ST3_smx:INFO:	# loops 0
13:32:52:ST3_smx:INFO:	# loops 1
13:32:54:ST3_smx:INFO:	# loops 2
13:32:55:ST3_smx:INFO:	Total # of broken channels: 0
13:32:55:ST3_smx:INFO:	List of broken channels: []
13:32:55:ST3_smx:INFO:	Total # of broken channels: 0
13:32:55:ST3_smx:INFO:	List of broken channels: []
13:32:56:febtest:INFO:	_Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
13:32:56:febtest:INFO:	30-01 | XA-000-08-002-000-004-194-07 |  47.3 | 1153.7
13:32:57:febtest:INFO:	28-03 | XA-000-08-002-000-004-188-11 |  53.6 | 1135.9
13:32:57:febtest:INFO:	26-05 | XA-000-08-002-000-004-182-11 |  47.3 | 1159.7
13:32:57:febtest:INFO:	24-07 | XA-000-08-002-000-004-190-11 |  40.9 | 1165.6
############################################################
#                   S U M M A R Y                          #
############################################################
TEST_NAME : FEB-Microcable
TEST_DATE : 24_02_23-13_31_58
OPERATOR  : Oleksandr S.; 
SITE      : GSI
SETUP     : GSI_TEST_SETUP_1
Set-ID    : 
---------------------------------------
MODULE_NAME : 
FEB_SN : 2117
FEB_TYPE : 8.2
FEB_UPLINKS : 2
FEB_A : 0
FEB_B : 1
---------------------------------------
---------------------------------------
VI_before_Init : ['0.000', '0.0000', '0.000', '0.0000', '2.450', '1.0180', '1.850', '0.8420']
VI_after__Init : ['0', '0', '0', '0', '0', '0']
VI_at__the_End : ['0', '0', '0', '0', '0', '0']