Go Back
FEB_1226 12.02.26 11:31:07
Info
11:31:07:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
11:31:07:ST3_Shared:INFO: FEB-ASIC
11:31:07:ST3_Shared:INFO: oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
11:31:07:febtest:INFO: Testing FEB with SN 1226
==============================================OOO==============================================
11:31:09:smx_tester:INFO: Scanning setup
11:31:09:elinks:INFO: Disabling clock on downlink 0
11:31:09:elinks:INFO: Disabling clock on downlink 1
11:31:09:elinks:INFO: Disabling clock on downlink 2
11:31:09:elinks:INFO: Disabling clock on downlink 3
11:31:09:elinks:INFO: Disabling clock on downlink 4
11:31:09:setup_element:INFO: Checking SOS, encoding_mode: SOS
11:31:09:master:INFO: Setting encoding mode SOS for groups [0], downlinks [0]
11:31:09:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
11:31:09:elinks:INFO: Disabling clock on downlink 0
11:31:09:elinks:INFO: Disabling clock on downlink 1
11:31:09:elinks:INFO: Disabling clock on downlink 2
11:31:09:elinks:INFO: Disabling clock on downlink 3
11:31:09:elinks:INFO: Disabling clock on downlink 4
11:31:09:setup_element:INFO: Checking SOS, encoding_mode: SOS
11:31:09:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 0
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 1
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 2
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 3
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 4
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 5
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 6
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 7
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 8
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 9
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 10
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 11
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 12
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 13
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 14
11:31:09:setup_element:INFO: SOS detected for group 0, downlink 1, uplink 15
11:31:09:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
11:31:09:elinks:INFO: Disabling clock on downlink 0
11:31:09:elinks:INFO: Disabling clock on downlink 1
11:31:09:elinks:INFO: Disabling clock on downlink 2
11:31:09:elinks:INFO: Disabling clock on downlink 3
11:31:09:elinks:INFO: Disabling clock on downlink 4
11:31:09:setup_element:INFO: Checking SOS, encoding_mode: SOS
11:31:09:master:INFO: Setting encoding mode SOS for groups [0], downlinks [2]
11:31:09:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
11:31:09:elinks:INFO: Disabling clock on downlink 0
11:31:09:elinks:INFO: Disabling clock on downlink 1
11:31:09:elinks:INFO: Disabling clock on downlink 2
11:31:09:elinks:INFO: Disabling clock on downlink 3
11:31:09:elinks:INFO: Disabling clock on downlink 4
11:31:09:setup_element:INFO: Checking SOS, encoding_mode: SOS
11:31:09:master:INFO: Setting encoding mode SOS for groups [0], downlinks [3]
11:31:09:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
11:31:09:elinks:INFO: Disabling clock on downlink 0
11:31:09:elinks:INFO: Disabling clock on downlink 1
11:31:09:elinks:INFO: Disabling clock on downlink 2
11:31:09:elinks:INFO: Disabling clock on downlink 3
11:31:09:elinks:INFO: Disabling clock on downlink 4
11:31:09:setup_element:INFO: Checking SOS, encoding_mode: SOS
11:31:09:master:INFO: Setting encoding mode SOS for groups [0], downlinks [4]
11:31:09:setup_element:INFO: Reassigning uplinks to uplinks which passed SOS detection
==============================================OOO==============================================
11:31:09:setup_element:INFO: Scanning clock phase
11:31:09:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
11:31:09:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
11:31:10:setup_element:INFO: Clock phase scan results for group 0, downlink 1
11:31:10:setup_element:INFO: Eye window for uplink 0 : ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
11:31:10:setup_element:INFO: Eye window for uplink 1 : ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
11:31:10:setup_element:INFO: Eye window for uplink 2 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
11:31:10:setup_element:INFO: Eye window for uplink 3 : ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
11:31:10:setup_element:INFO: Eye window for uplink 4 : ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
11:31:10:setup_element:INFO: Eye window for uplink 5 : ______________________________________________________________________XXXXXXXXX_
Clock Delay: 34
11:31:10:setup_element:INFO: Eye window for uplink 6 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
11:31:10:setup_element:INFO: Eye window for uplink 7 : _____________________________________________________________________XXXXXXX____
Clock Delay: 32
11:31:10:setup_element:INFO: Eye window for uplink 8 : ___________________________________________________________________XXXXXXXXX____
Clock Delay: 31
11:31:10:setup_element:INFO: Eye window for uplink 9 : ___________________________________________________________________XXXXXXXXX____
Clock Delay: 31
11:31:10:setup_element:INFO: Eye window for uplink 10: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
11:31:10:setup_element:INFO: Eye window for uplink 11: _____________________________________________________________________XXXXXXXX___
Clock Delay: 32
11:31:10:setup_element:INFO: Eye window for uplink 12: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
11:31:10:setup_element:INFO: Eye window for uplink 13: ______________________________________________________________________XXXXXXXX__
Clock Delay: 33
11:31:10:setup_element:INFO: Eye window for uplink 14: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
11:31:10:setup_element:INFO: Eye window for uplink 15: __________________________________________________________________XXXXXXXX______
Clock Delay: 29
11:31:10:setup_element:INFO: Setting the clock phase to 32 for group 0, downlink 1
==============================================OOO==============================================
11:31:10:setup_element:INFO: Scanning data phases
11:31:10:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
11:31:10:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
11:31:15:setup_element:INFO: Data phase scan results for group 0, downlink 1
11:31:15:setup_element:INFO: Eye window for uplink 0 : ________________XXXXXX__________________
Data delay found: 38
11:31:15:setup_element:INFO: Eye window for uplink 1 : _______________XXXX_____________________
Data delay found: 36
11:31:15:setup_element:INFO: Eye window for uplink 2 : ____________XXXXXX______________________
Data delay found: 34
11:31:15:setup_element:INFO: Eye window for uplink 3 : _____________XXXXXX_____________________
Data delay found: 35
11:31:15:setup_element:INFO: Eye window for uplink 4 : _____________XXXXX______________________
Data delay found: 35
11:31:15:setup_element:INFO: Eye window for uplink 5 : ___________XXXXX________________________
Data delay found: 33
11:31:15:setup_element:INFO: Eye window for uplink 6 : _XXXXX__________________________________
Data delay found: 23
11:31:15:setup_element:INFO: Eye window for uplink 7 : XXXX_________________________________XXX
Data delay found: 20
11:31:15:setup_element:INFO: Eye window for uplink 8 : _____________________________XXXXX______
Data delay found: 11
11:31:15:setup_element:INFO: Eye window for uplink 9 : ________________________________XXXXXX__
Data delay found: 14
11:31:15:setup_element:INFO: Eye window for uplink 10: X__________________________________XXXXX
Data delay found: 17
11:31:15:setup_element:INFO: Eye window for uplink 11: XX__________________________________XXXX
Data delay found: 18
11:31:15:setup_element:INFO: Eye window for uplink 12: XX__________________________________XXXX
Data delay found: 18
11:31:15:setup_element:INFO: Eye window for uplink 13: XXX_________________________________XXXX
Data delay found: 19
11:31:15:setup_element:INFO: Eye window for uplink 14: ____________________________XXXXX_______
Data delay found: 10
11:31:15:setup_element:INFO: Eye window for uplink 15: _____________________________XXXXX______
Data delay found: 11
11:31:15:setup_element:INFO: Setting the data phase to 38 for uplink 0
11:31:15:setup_element:INFO: Setting the data phase to 36 for uplink 1
11:31:15:setup_element:INFO: Setting the data phase to 34 for uplink 2
11:31:15:setup_element:INFO: Setting the data phase to 35 for uplink 3
11:31:15:setup_element:INFO: Setting the data phase to 35 for uplink 4
11:31:15:setup_element:INFO: Setting the data phase to 33 for uplink 5
11:31:15:setup_element:INFO: Setting the data phase to 23 for uplink 6
11:31:15:setup_element:INFO: Setting the data phase to 20 for uplink 7
11:31:15:setup_element:INFO: Setting the data phase to 11 for uplink 8
11:31:15:setup_element:INFO: Setting the data phase to 14 for uplink 9
11:31:15:setup_element:INFO: Setting the data phase to 17 for uplink 10
11:31:15:setup_element:INFO: Setting the data phase to 18 for uplink 11
11:31:15:setup_element:INFO: Setting the data phase to 18 for uplink 12
11:31:15:setup_element:INFO: Setting the data phase to 19 for uplink 13
11:31:15:setup_element:INFO: Setting the data phase to 10 for uplink 14
11:31:15:setup_element:INFO: Setting the data phase to 11 for uplink 15
==============================================OOO==============================================
11:31:15:setup_element:INFO: Beginning SMX ASICs map scan
11:31:15:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
11:31:15:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
11:31:15:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
11:31:15:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
11:31:15:uplink:INFO: Setting uplinks mask [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
11:31:15:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 0, uplink 1
11:31:16:setup_element:INFO: Adding ASIC 0x0, ASIC uplink 1, uplink 0
11:31:16:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 0, uplink 8
11:31:16:setup_element:INFO: Adding ASIC 0x1, ASIC uplink 1, uplink 9
11:31:16:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 0, uplink 3
11:31:16:setup_element:INFO: Adding ASIC 0x2, ASIC uplink 1, uplink 2
11:31:16:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 0, uplink 10
11:31:16:setup_element:INFO: Adding ASIC 0x3, ASIC uplink 1, uplink 11
11:31:16:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 0, uplink 5
11:31:16:setup_element:INFO: Adding ASIC 0x4, ASIC uplink 1, uplink 4
11:31:16:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 0, uplink 12
11:31:16:setup_element:INFO: Adding ASIC 0x5, ASIC uplink 1, uplink 13
11:31:17:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 0, uplink 7
11:31:17:setup_element:INFO: Adding ASIC 0x6, ASIC uplink 1, uplink 6
11:31:17:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 0, uplink 14
11:31:17:setup_element:INFO: Adding ASIC 0x7, ASIC uplink 1, uplink 15
11:31:18:ST3_emu:INFO:
Setup Element:
Group: 0
Downlink: 1
Uplinks: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
ASICs Map:
ASIC address 0x0: (ASIC uplink, uplink): (0, 1), (1, 0)
ASIC address 0x1: (ASIC uplink, uplink): (0, 8), (1, 9)
ASIC address 0x2: (ASIC uplink, uplink): (0, 3), (1, 2)
ASIC address 0x3: (ASIC uplink, uplink): (0, 10), (1, 11)
ASIC address 0x4: (ASIC uplink, uplink): (0, 5), (1, 4)
ASIC address 0x5: (ASIC uplink, uplink): (0, 12), (1, 13)
ASIC address 0x6: (ASIC uplink, uplink): (0, 7), (1, 6)
ASIC address 0x7: (ASIC uplink, uplink): (0, 14), (1, 15)
Clock Phase Characteristic:
Optimal Phase: 32
Window Length: 67
Eye Windows:
Uplink 0: ______________________________________________________________________XXXXXXXXX_
Uplink 1: ______________________________________________________________________XXXXXXXXX_
Uplink 2: ______________________________________________________________________XXXXXXXX__
Uplink 3: ______________________________________________________________________XXXXXXXX__
Uplink 4: ______________________________________________________________________XXXXXXXXX_
Uplink 5: ______________________________________________________________________XXXXXXXXX_
Uplink 6: _____________________________________________________________________XXXXXXX____
Uplink 7: _____________________________________________________________________XXXXXXX____
Uplink 8: ___________________________________________________________________XXXXXXXXX____
Uplink 9: ___________________________________________________________________XXXXXXXXX____
Uplink 10: _____________________________________________________________________XXXXXXXX___
Uplink 11: _____________________________________________________________________XXXXXXXX___
Uplink 12: ______________________________________________________________________XXXXXXXX__
Uplink 13: ______________________________________________________________________XXXXXXXX__
Uplink 14: __________________________________________________________________XXXXXXXX______
Uplink 15: __________________________________________________________________XXXXXXXX______
Data phase characteristics:
Uplink 0:
Optimal Phase: 38
Window Length: 34
Eye Window: ________________XXXXXX__________________
Uplink 1:
Optimal Phase: 36
Window Length: 36
Eye Window: _______________XXXX_____________________
Uplink 2:
Optimal Phase: 34
Window Length: 34
Eye Window: ____________XXXXXX______________________
Uplink 3:
Optimal Phase: 35
Window Length: 34
Eye Window: _____________XXXXXX_____________________
Uplink 4:
Optimal Phase: 35
Window Length: 35
Eye Window: _____________XXXXX______________________
Uplink 5:
Optimal Phase: 33
Window Length: 35
Eye Window: ___________XXXXX________________________
Uplink 6:
Optimal Phase: 23
Window Length: 35
Eye Window: _XXXXX__________________________________
Uplink 7:
Optimal Phase: 20
Window Length: 33
Eye Window: XXXX_________________________________XXX
Uplink 8:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
Uplink 9:
Optimal Phase: 14
Window Length: 34
Eye Window: ________________________________XXXXXX__
Uplink 10:
Optimal Phase: 17
Window Length: 34
Eye Window: X__________________________________XXXXX
Uplink 11:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 12:
Optimal Phase: 18
Window Length: 34
Eye Window: XX__________________________________XXXX
Uplink 13:
Optimal Phase: 19
Window Length: 33
Eye Window: XXX_________________________________XXXX
Uplink 14:
Optimal Phase: 10
Window Length: 35
Eye Window: ____________________________XXXXX_______
Uplink 15:
Optimal Phase: 11
Window Length: 35
Eye Window: _____________________________XXXXX______
==============================================OOO==============================================
11:31:18:setup_element:INFO: Performing Elink synchronization
11:31:18:master:INFO: Setting encoding mode SOS for groups [0], downlinks [1]
11:31:18:master:INFO: Setting encoding mode K.28.1 for groups [0], downlinks [1]
11:31:18:master:INFO: Setting encoding mode EOS for groups [0], downlinks [1]
11:31:18:master:INFO: Setting encoding mode FRAME for groups [0], downlinks [1]
==============================================OOO==============================================
11:31:18:setup_element:INFO: Writing SMX Elink masks for group 0, downlink 1
11:31:18:uplink:INFO: Enabling uplinks [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
==============================================OOO==============================================
|_________________________________________________________________________|
_addr_|_upli_|_dwnli_|_grp_|_uplinks_|_#uplinks_|_uplinks_map_
0 | [0] | 1 | 0 | [1] | 2 | [(0, 1), (1, 0)]
1 | [0] | 1 | 0 | [8] | 2 | [(0, 8), (1, 9)]
2 | [0] | 1 | 0 | [3] | 2 | [(0, 3), (1, 2)]
3 | [0] | 1 | 0 | [10] | 2 | [(0, 10), (1, 11)]
4 | [0] | 1 | 0 | [5] | 2 | [(0, 5), (1, 4)]
5 | [0] | 1 | 0 | [12] | 2 | [(0, 12), (1, 13)]
6 | [0] | 1 | 0 | [7] | 2 | [(0, 7), (1, 6)]
7 | [0] | 1 | 0 | [14] | 2 | [(0, 14), (1, 15)]
|_________________________________________________________________________|
11:31:19:febtest:INFO: Init all SMX (CSA): 30
11:31:32:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
11:31:32:febtest:INFO: 01-00 | XA-000-08-003-000-006-026-06 | 9.3 | 1311.9
11:31:33:febtest:INFO: 08-01 | XA-000-08-003-000-000-151-09 | 63.2 | 1076.3
11:31:33:febtest:INFO: 03-02 | XA-000-08-003-000-006-003-01 | 44.1 | 1147.8
11:31:33:febtest:INFO: 10-03 | XA-000-08-003-000-005-214-07 | 34.6 | 1177.4
11:31:33:febtest:INFO: 05-04 | XA-000-08-003-000-005-186-12 | 34.6 | 1177.4
11:31:34:febtest:INFO: 12-05 | XA-000-08-002-001-008-052-03 | 53.6 | 1118.1
11:31:34:febtest:INFO: 07-06 | XA-000-08-003-000-001-135-03 | 66.4 | 1088.3
11:31:34:febtest:INFO: 14-07 | XA-057-08-002-003-007-021-10 | 60.0 | 1118.1
11:31:35:febtest:INFO: Set all CSA to ZERO
FEB type: A FEB_A: 1 FEB_B: 0
11:31:37:ST3_smx:INFO: chip: 1-0 9.288730 C 1358.043840 mV
11:31:37:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:37:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:37:ST3_smx:INFO: Electrons
11:31:37:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:39:ST3_smx:INFO: ----> Checking Analog response
11:31:39:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:40:ST3_smx:INFO: Total # broken ch: 0
11:31:40:ST3_smx:INFO: List FAST: []
11:31:40:ST3_smx:INFO: List SLOW: []
11:31:40:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:40:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:40:ST3_smx:INFO: Holes
11:31:40:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:42:ST3_smx:INFO: ----> Checking Analog response
11:31:42:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:42:ST3_smx:INFO: Total # broken ch: 0
11:31:42:ST3_smx:INFO: List FAST: []
11:31:42:ST3_smx:INFO: List SLOW: []
11:31:44:ST3_smx:INFO: chip: 8-1 63.173842 C 1088.263500 mV
11:31:44:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:44:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:44:ST3_smx:INFO: Electrons
11:31:44:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:46:ST3_smx:INFO: ----> Checking Analog response
11:31:46:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:46:ST3_smx:INFO: Total # broken ch: 0
11:31:46:ST3_smx:INFO: List FAST: []
11:31:46:ST3_smx:INFO: List SLOW: []
11:31:46:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:46:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:46:ST3_smx:INFO: Holes
11:31:46:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:48:ST3_smx:INFO: ----> Checking Analog response
11:31:48:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:48:ST3_smx:INFO: Total # broken ch: 0
11:31:48:ST3_smx:INFO: List FAST: []
11:31:48:ST3_smx:INFO: List SLOW: []
11:31:50:ST3_smx:INFO: chip: 3-2 44.073563 C 1159.654860 mV
11:31:50:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:50:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:50:ST3_smx:INFO: Electrons
11:31:50:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:52:ST3_smx:INFO: ----> Checking Analog response
11:31:52:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:52:ST3_smx:INFO: Total # broken ch: 0
11:31:52:ST3_smx:INFO: List FAST: []
11:31:52:ST3_smx:INFO: List SLOW: []
11:31:52:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:52:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:52:ST3_smx:INFO: Holes
11:31:52:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:55:ST3_smx:INFO: ----> Checking Analog response
11:31:55:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:55:ST3_smx:INFO: Total # broken ch: 0
11:31:55:ST3_smx:INFO: List FAST: []
11:31:55:ST3_smx:INFO: List SLOW: []
11:31:56:ST3_smx:INFO: chip: 10-3 34.556970 C 1183.292940 mV
11:31:56:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:56:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:56:ST3_smx:INFO: Electrons
11:31:56:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:58:ST3_smx:INFO: ----> Checking Analog response
11:31:58:ST3_smx:INFO: ----> Checking broken channels
11:31:58:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:58:ST3_discr_histo:WARNING: Not enough entries for fit!!!
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:31:59:ST3_smx:INFO: Total # broken ch: 620
11:31:59:ST3_smx:INFO: List FAST: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 0, 1, 2, 4, 5, 6, 8, 9, 10, 12, 13, 14, 16, 17, 18, 20, 21, 22, 24, 25, 26, 28, 29, 30, 32, 33, 34, 36, 37, 38, 40, 41, 42, 44, 45, 46, 48, 49, 50, 52, 53, 54, 56, 57, 58, 60, 61, 62, 64, 65, 66, 68, 69, 70, 72, 73, 74, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127]
11:31:59:ST3_smx:INFO: List SLOW: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127]
11:31:59:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:59:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:31:59:ST3_smx:INFO: Holes
11:31:59:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:01:ST3_smx:INFO: ----> Checking Analog response
11:32:01:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:01:ST3_discr_histo:WARNING: Not enough entries for fit!!!
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:01:ST3_smx:INFO: Total # broken ch: 620
11:32:01:ST3_smx:INFO: List FAST: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 0, 1, 2, 4, 5, 6, 8, 9, 10, 12, 13, 14, 16, 17, 18, 20, 21, 22, 24, 25, 26, 28, 29, 30, 32, 33, 34, 36, 37, 38, 40, 41, 42, 44, 45, 46, 48, 49, 50, 52, 53, 54, 56, 57, 58, 60, 61, 62, 64, 65, 66, 68, 69, 70, 72, 73, 74, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127]
11:32:01:ST3_smx:INFO: List SLOW: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127]
11:32:02:ST3_smx:INFO: chip: 5-4 37.726682 C 1195.082160 mV
11:32:02:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:02:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:02:ST3_smx:INFO: Electrons
11:32:02:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:04:ST3_smx:INFO: ----> Checking Analog response
11:32:05:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:05:ST3_smx:INFO: Total # broken ch: 1
11:32:05:ST3_smx:INFO: List FAST: [1]
11:32:05:ST3_smx:INFO: List SLOW: []
11:32:05:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:05:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:05:ST3_smx:INFO: Holes
11:32:05:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:07:ST3_smx:INFO: ----> Checking Analog response
11:32:07:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:07:ST3_smx:INFO: Total # broken ch: 1
11:32:07:ST3_smx:INFO: List FAST: [1]
11:32:07:ST3_smx:INFO: List SLOW: []
11:32:09:ST3_smx:INFO: chip: 12-5 56.797143 C 1129.995435 mV
11:32:09:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:09:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:09:ST3_smx:INFO: Electrons
11:32:09:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:11:ST3_smx:INFO: ----> Checking Analog response
11:32:11:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:11:ST3_smx:INFO: Total # broken ch: 10
11:32:11:ST3_smx:INFO: List FAST: []
11:32:11:ST3_smx:INFO: List SLOW: [13, 17, 21, 29, 53, 57, 69, 77, 93, 113]
11:32:11:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:11:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:11:ST3_smx:INFO: Holes
11:32:11:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:13:ST3_smx:INFO: ----> Checking Analog response
11:32:13:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:13:ST3_smx:INFO: Total # broken ch: 10
11:32:13:ST3_smx:INFO: List FAST: []
11:32:13:ST3_smx:INFO: List SLOW: [13, 17, 21, 29, 53, 57, 69, 77, 93, 113]
11:32:15:ST3_smx:INFO: chip: 7-6 69.560482 C 1100.211760 mV
11:32:15:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:15:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:15:ST3_smx:INFO: Electrons
11:32:15:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:17:ST3_smx:INFO: ----> Checking Analog response
11:32:17:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:17:ST3_smx:INFO: Total # broken ch: 0
11:32:17:ST3_smx:INFO: List FAST: []
11:32:17:ST3_smx:INFO: List SLOW: []
11:32:17:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:17:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:17:ST3_smx:INFO: Holes
11:32:17:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:19:ST3_smx:INFO: ----> Checking Analog response
11:32:19:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:19:ST3_smx:INFO: Total # broken ch: 0
11:32:19:ST3_smx:INFO: List FAST: []
11:32:19:ST3_smx:INFO: List SLOW: []
11:32:21:ST3_smx:INFO: chip: 14-7 66.365920 C 1135.937260 mV
11:32:21:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:21:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:21:ST3_smx:INFO: Electrons
11:32:21:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:23:ST3_smx:INFO: ----> Checking Analog response
11:32:23:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:23:ST3_smx:INFO: Total # broken ch: 0
11:32:23:ST3_smx:INFO: List FAST: []
11:32:23:ST3_smx:INFO: List SLOW: []
11:32:23:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:23:ST3_discr_histo:WARNING: Not enough entries for fit!!!
11:32:23:ST3_smx:INFO: Holes
11:32:23:ST3_smx:INFO: Injected pulses: 150LSB, amp_cal 8.400000 fC
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:25:ST3_smx:INFO: ----> Checking Analog response
11:32:25:ST3_smx:INFO: ----> Checking broken channels
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
THistPainter::MakeChopt:0: RuntimeWarning: option SCAT is deprecated.
11:32:26:ST3_smx:INFO: Total # broken ch: 0
11:32:26:ST3_smx:INFO: List FAST: []
11:32:26:ST3_smx:INFO: List SLOW: []
11:32:26:febtest:INFO: _Addr_|___________ASIC-ID_____________|_T_[C]_|_Vddm_[mV]_
11:32:26:febtest:INFO: 01-00 | XA-000-08-003-000-006-026-06 | 6.1 | 1578.5
11:32:26:febtest:INFO: 08-01 | XA-000-08-003-000-000-151-09 | 66.4 | 1106.2
11:32:26:febtest:INFO: 03-02 | XA-000-08-003-000-006-003-01 | 47.3 | 1177.4
11:32:27:febtest:INFO: 10-03 | XA-000-08-003-000-005-214-07 | 40.9 | 1201.0
11:32:27:febtest:INFO: 05-04 | XA-000-08-003-000-005-186-12 | 37.7 | 1218.6
11:32:27:febtest:INFO: 12-05 | XA-000-08-002-001-008-052-03 | 60.0 | 1153.7
11:32:27:febtest:INFO: 07-06 | XA-000-08-003-000-001-135-03 | 72.8 | 1118.1
11:32:28:febtest:INFO: 14-07 | XA-057-08-002-003-007-021-10 | 66.4 | 1141.9
{'CSA_FRONT': 55, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 55, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 55, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 55, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 55, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 55, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 55, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 55, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 55, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 55, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 55, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 55, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 55, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 55, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 55, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 55, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 55, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 55, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 55, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 55, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 55, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
{'CSA_FRONT': 55, 'IFED': 31, 'PSC_BIAS': 131, 'SH_BIAS': 55, 'AMP_CAL': 150, 'SH_SLOW': 0, 'IREF_FAST': 32, 'THR2_GLB': 30, 'ADC_VREF_N': 30, 'ADC_VREF_P': 58, 'ADC_VREF_T': 128, 'CAL_STROBE': 64, 'IN_CSAP': 30, 'CSA_BACK': 55, 'CSA_CAS_BUF': 27, 'SH_CAS_BUF': 27, 'CSA_BIAS': 91, 'DAC_THR1': 0, 'ADC_VREF_TR': 122, 'DIAG_IBIAS': 31}
===============================
############################################################
# S U M M A R Y #
############################################################
TEST_NAME : FEB-ASIC
TEST_DATE : 26_02_12-11_31_07
OPERATOR : Oleksandr S.; Robert V.;
SITE : GSI | SETUP : GSI_TEST_SETUP_1
------------------------------------------------------------
| FEB_SN : 1226| FEB_TYPE : 8.2| FEB_UPLINKS : 2| FEB_A
AMP_MODE : STS
------------------------------------------------------------
MODULE_NAME
------------------------------------------------------------
VI_before_Init : ['2.449', '1.9540', '1.849', '2.0450', '0.000', '0.0000', '0.000', '0.0000']
VI_after__Init : ['2.450', '2.1250', '1.850', '2.3950', '0.000', '0.0000', '0.000', '0.0000']
VI_at__the_End : ['2.450', '2.1300', '1.850', '0.6681', '0.000', '0.0000', '0.000', '0.0000']