00001 //--------------------------------------------------------------- 00002 // Go4 Release Package v2.10-5 (build 21005) 00003 // 03-Nov-2005 00004 //--------------------------------------------------------------- 00005 // The GSI Online Offline Object Oriented (Go4) Project 00006 // Experiment Data Processing at DVEE department, GSI 00007 //--------------------------------------------------------------- 00008 // 00009 //Copyright (C) 2000- Gesellschaft f. Schwerionenforschung, GSI 00010 // Planckstr. 1, 64291 Darmstadt, Germany 00011 //Contact: http://go4.gsi.de 00012 //---------------------------------------------------------------- 00013 //This software can be used under the license agreements as stated 00014 //in Go4License.txt file which is part of the distribution. 00015 //---------------------------------------------------------------- 00016 #include "typedefs.h" 00017 /* 00018 * N. Kurz 00019 * global SBS setup parameter structure 00020 */ 00021 00022 /* After allocating s_setup, set in f_ut_setup_ini */ 00023 /* ps_setup->l_endian = 1; */ 00024 /* ps_setup->l_version = n; */ 00025 /* ps_setup->bl_struc_len = sizeof(s_setup)/4; */ 00026 /* ps_setup->l_fix_lw = ((int)&lp_rem_mem_base[0]-(int)ps_setup)/4; */ 00027 /* ps_setup->bl_sbs__n_cr = SBS__N_CR; */ 00028 /* ps_setup->bl_sbs__n_trg_typ = SBS__N_TRG_TYP; */ 00029 00030 typedef struct 00031 { 00032 /*---------------------------------------------------------------------------*/ 00033 INTU4 l_endian; /* set to 1 */ 00034 INTU4 l_version; /* increment in f_ut_setup_ini after changes */ 00035 INTU4 bl_struc_len; /* sizeof(s_setup)/4 : length of this structure */ 00036 INTU4 l_fix_lw; /* (&lp_rem_mem_base-ps_setup)/4 : swapping size */ 00037 INTU4 bl_sbs__n_cr; /* set to SBS__N_CR */ 00038 INTU4 bl_sbs__n_trg_typ; /* set to SBS__N_TRG_TYP */ 00039 /*---------------------------------------------------------------------------*/ 00040 INTU4 bi_master; /* indicates type of master event builder */ 00041 /* meb: 1 = CVC, 2 = E6, 3 = E7 */ 00042 INTU4 bl_no_crates; /* Number of crates to read (bh_rd_flg > 0) */ 00043 INTU4 bh_crate_nr; /* crate nr. of readout processor: meb = 0, slave = 1-15 */ 00044 /* this value will be set by the load setup command and */ 00045 /* is not parsed from the .usf file */ 00046 /*---------------------------------------------------------------------------*/ 00047 INTU4 bl_ev_buf_len; /* length of single event buffer */ 00048 INTU4 bl_n_ev_buf; /* number of event buffers in a stream */ 00049 INTU4 bl_n_stream; /* number of streams */ 00050 /*---------------------------------------------------------------------------*/ 00051 INTU4 bi_evt_typ_sy; /* event type of synchronous events, default = 10 */ 00052 INTU4 bi_evt_typ_asy; /* event type of asynchronous events, default = 10 */ 00053 INTU4 bi_evt_subtyp_sy; /* event subtype of synchronous events, default = 1 */ 00054 INTU4 bi_evt_subtyp_asy; /* event subtype of asynchronous events, default = 2 */ 00055 INTS4 h_se_control; /* serves as branch identifier in a multi-branch system */ 00056 /*---------------------------------------------------------------------------*/ 00057 INTU4 bh_rd_typ; /* 0 = standard readout with readout tables */ 00058 /* 1 = user readout (function) */ 00059 /* if the following bh_meb_asy_flg is set to 1 there will be a second */ 00060 /* async. subevent pipe installed, which will be collected by the meb */ 00061 /* collector, but must be filled by a seperate process */ 00062 INTU4 bh_col_mode; /* indicates mode of this MEB collector or master readout:*/ 00063 /* 0 = standard, the collector formats events and passes */ 00064 /* the formatted event buffer streams to the */ 00065 /* transport */ 00066 /* 1 = collector collects subevents from the various */ 00067 /* SBS pipes, but no event formatting will be done. */ 00068 /* instead the collected subevents are written into a */ 00069 /* output pipe for the next layer node of the */ 00070 /* multi-branch multi-layer daq system. this mode */ 00071 /* requires bl_ml_pipe_base_addr, bl_ml_pipe_seg_len */ 00072 /* and bl_ml_pipe_len to be specified (see below). */ 00073 /* 2 = only m_read_meb and no collector runs on the */ 00074 /* SBS master (MEB). Its subevent pipe will be read */ 00075 /* by a node of the multi-branch multi-layer daq */ 00076 /* system. in this case the mb ml node gets the pipe */ 00077 /* specs from bl_pipe_seg_len and bl_pipe_len */ 00078 /* (see above). */ 00079 /* 3 = includes both 0 and 1 mode. */ 00080 /*---------------------------------------------------------------------------*/ 00081 INTU4 bl_loc_esone_base; /* base address to execute CAMAC cnafs via the ESONE */ 00082 /* window on the local crate*/ 00083 INTU4 bl_rem_esone_base; /* base address to execute CAMAC cnafs via the ESONE */ 00084 /* window on the remote crate*/ 00085 INTU4 bl_esone_off; /* offset from standard to ESONE window in bytes */ 00086 INTU4 bl_cvc_crr_off; /* offset from to the CVC CAMAC Read Register */ 00087 INTU4 bl_cvc_csr_off; /* offset to the CVC Control and Status Register */ 00088 INTU4 bl_cvc_clb_off; /* offset to the CVC CAMAC Lam Buffer */ 00089 INTU4 bl_se_meb_asy_len; /* length of the async. pipe of the master, including */ 00090 /* control and data */ 00091 INTU4 bh_meb_asy_flg; /* indicates if meb must collect must an async. pipe */ 00092 /* residing on the meb: 0 = no, 1 = yes */ 00093 INTU4 bl_ml_pipe_base_addr;/* base address of the multi-branch multi-layer daq */ 00094 /* system output pipe. */ 00095 /* only requested ig bh_col_mode = 1,2 */ 00096 INTU4 bl_ml_pipe_seg_len; /* length of the multi-branch multi-layer daq system */ 00097 /* output pipe. (total lengt of subevent pipe) */ 00098 /* only requested ig bh_col_mode = 1,2 */ 00099 INTU4 bl_ml_pipe_len; /* number of subevent/fragment slots in the multi-branch */ 00100 /* multi-layer daq system output pipe */ 00101 /* only requested ig bh_col_mode = 1,2 */ 00102 INTU4 bl_n_col_retry; /* number of retries the subevent collect process makes */ 00103 /* until giving up time slice */ 00104 /*---------------------------------------------------------------------------*/ 00105 INTU4 bh_meb_trig_mode; /* if this is set to NON zero a special mode is requested */ 00106 /* for the trigger module serving m_read_meb. */ 00107 /* this could be: */ 00108 /* NOT irq (LAM, VME irq) */ 00109 /* or NOT standard base address (VME) */ 00110 /* or NOT local crate */ 00111 /* if bh_meb_trig_mode is NOT 0 always the following two */ 00112 /* setup paramters will be taken for type and base addr. */ 00113 /* */ 00114 /* NOTE: the fast clear and conversion time will be taken */ 00115 /* from bl_trig_fct[0] and bl_trig_cvt[0] from this */ 00116 /* setup structure */ 00117 /* */ 00118 /* 0 = standard = local interrupt (CAMAC LAM, VME IRQ) */ 00119 /* 1 = special: local interrupt (CAMAC LAM, VME IRQ) */ 00120 /* 2 = special: remote VSB interrupt (not yet impleme) */ 00121 /* 3 = special: polling */ 00122 INTU4 bh_special_meb_trig_type; 00123 /* 1 = CAMAC type trigger module */ 00124 /* 2 = VME type trigger module */ 00125 /* 3 = FASTBUS type triggermodule */ 00126 INTU4 bl_special_meb_trig_base; 00127 /* base address of trigger module acting together with */ 00128 /* m_read_meb if bh_meb_trig_mode != 0 */ 00129 /* NOTE: if trigger module is remote the complete (VSB) */ 00130 /* base address must be specified. example: */ 00131 /* f0580000 for a CAMAC trigger module in crate 2 */ 00132 /* serving m_read_meb running on an E7 in a VME */ 00133 /* crate. (see sketch at end of this file) */ 00134 /*---------------------------------------------------------------------------*/ 00135 INTU4 lp_cvc_irq; /* start address of the CVC irq physical segment */ 00136 INTU4 bl_cvc_irq_len; /* length of CVC irq phys. segment */ 00137 INTU4 bl_cvc_irq_source_off;/* offset from lp_cvc_irq to the CVC irq source register */ 00138 INTU4 bl_cvc_irq_mask_off; /* offset from lp_cvc_irq to the CVC irq mask register */ 00139 /*---------------------------------------------------------------------------*/ 00140 /* all values in this section will be initalized by a loader task */ 00141 INTS4 h_rd_tab_flg; /* -1 = init and readout tables invalid (this is set by */ 00142 /* the write_sbs_setup task */ 00143 /* 0 = init and readout tables have to be modified to */ 00144 /* virtual cnafs */ 00145 /* 1 = this modification is done and must not be done */ 00146 /* before a new table was loaded */ 00147 INTU4 bl_init_read_len; /* total length of init and readout CAMAC cnaf list for */ 00148 /* all crates and trigger types (in bytes) */ 00149 /* ------------------ end of fixed block --------------------------*/ 00150 /*---------------------------------------------------------------------------*/ 00151 INTU4 lp_rem_mem_base[SBS__N_CR]; 00152 /* physical base address for accessing slave crate memory */ 00153 /* seen from the MEB (pipes). This could be the VSB */ 00154 /* base address for accessing remote crates */ 00155 INTU4 bl_rem_mem_off[SBS__N_CR]; 00156 /* offset from lp_rem_mem_base[SBS__N_CR] to the memory */ 00157 /* space of the remote slaves (seen from MEB) */ 00158 INTU4 bl_rem_mem_len[SBS__N_CR]; 00159 /* lenght of the memory address window with the physical */ 00160 /* base adress lp_rem_mem_base[SBS__N_CR] */ 00161 /*---------------------------------------------------------------------------*/ 00162 INTU4 lp_rem_cam_base[SBS__N_CR]; 00163 /* physical base address for accessing slave directly via CAMAC */ 00164 INTU4 bl_rem_cam_off[SBS__N_CR]; 00165 /* offset from lp_rem_cam_base[SBS__N_CR] to the remote */ 00166 /* CAMAC space of the slaves (seen from MEB). */ 00167 INTU4 bl_rem_cam_len[SBS__N_CR]; 00168 /* lenght of the CAMAC address window with the physical */ 00169 /*---------------------------------------------------------------------------*/ 00170 INTU4 lp_loc_mem_base[SBS__N_CR]; 00171 /* base address for accessing local crate. (could be for */ 00172 /* example local CAMAC base or extended VME base.) */ 00173 INTU4 bl_loc_mem_len[SBS__N_CR]; 00174 /* length of physical segment for accessing local crate */ 00175 /* starting from lp_loc_mem_base[SBS__N_CR]. */ 00176 /*---------------------------------------------------------------------------*/ 00177 INTU4 l_loc_pipe_type[SBS__N_CR]; 00178 /* type of subevent pipe: 0: with smem_create */ 00179 /* 1: direct mapping */ 00180 INTU4 lp_loc_pipe_base[SBS__N_CR]; 00181 /* RAM start address of the crate controller (used for */ 00182 /* location of subevent pipe) */ 00183 INTU4 bl_pipe_off[SBS__N_CR]; 00184 /* offset from lp_ram_loc_start to start of the remote */ 00185 /* communication segment slave <-> master seen from the */ 00186 /* slave in bytes = start of subevent pipe */ 00187 INTU4 bl_pipe_seg_len[SBS__N_CR]; 00188 /* length of the remote communication segment in bytes */ 00189 /* = total lengt of subevent pipe */ 00190 INTU4 bl_pipe_len[SBS__N_CR]; /* number of subevent slots in a pipe */ 00191 INTU4 bh_controller_id[SBS__N_CR]; 00192 /* bh_controller_id MUST be set for ESONE CNAF execution */ 00193 /* 1 = CVC, 2 = E6, 3 = E7, 4 = AEB, 5 = CBV, 6 = CVI */ 00194 /* 7 = CAV (Q and X inverted) */ 00195 INTU4 bh_sy_asy_flg[SBS__N_CR]; 00196 /* indicates if this crate must be readout synchronous */ 00197 /* or asynchronous: 0 = synchronous, 1 = asynchronous */ 00198 /* this flag is only valid for crates with intelligent */ 00199 /* controller. At this point it is decided wether a crate */ 00200 /* is readout sync. or async. */ 00201 INTU4 bh_trig_stat_nr[SBS__N_CR];/* CAMAC station nr. of the trigger module, must be 1 */ 00202 INTU4 bl_trig_cvt[SBS__N_CR]; /* conversion time of trigger module */ 00203 INTU4 bl_trig_fct[SBS__N_CR]; /* fast clear acceptance time of trigger module */ 00204 INTS4 i_se_typ[SBS__N_CR]; /* subevent typ, default = 10 */ 00205 INTS4 i_se_subtyp[SBS__N_CR]; /* subevent subtyp: CAMAC = 1, FASTBUS = 2 */ 00206 INTS4 i_se_procid[SBS__N_CR]; /* subevent processor id */ 00207 /*---------------------------------------------------------------------------*/ 00208 INTU4 bh_rd_flg[SBS__N_CR]; 00209 /* 0 = crate not readout */ 00210 /* 1 = crate read out by meb */ 00211 /* 2 = crate readout by intelligent crate controller */ 00212 INTU4 bl_init_tab_off[SBS__N_CR]; 00213 /* offset from start of readout table segment to the */ 00214 /* start of the init table as a function of crate number */ 00215 /* (in longwords) */ 00216 INTU4 bi_init_tab_len[SBS__N_CR]; 00217 /* lenght of the init tables. if one of this values is 0 */ 00218 /* it means that this crate must not be not initalized */ 00219 /* (in longwords) */ 00220 INTU4 bl_max_se_len[SBS__N_CR][SBS__N_TRG_TYP]; 00221 /* maximal subevent length [b] of this crate and trigger */ 00222 INTU4 bl_rd_tab_off[SBS__N_CR][SBS__N_TRG_TYP]; 00223 /* offset from start of readout table segment to the */ 00224 /* start of the readout tables as a function of crate */ 00225 /* number and trigger type (in longwords) */ 00226 INTU4 bi_rd_tab_len[SBS__N_CR][SBS__N_TRG_TYP]; 00227 /* lenght of the readout tables. if one of this values */ 00228 /* is 0 it means that this crate for this trigger type is */ 00229 /* not read out (in longwords) */ 00230 /*---------------------------------------------------------------------------*/ 00231 } s_setup; 00232 00233 /* 00234 * address offset for memory access from the master event builder to the slave 00235 * CVC's via VSB. these offsets point to the memory address 0x100000 seen 00236 * from the slave CVC, which is the beginning of the RAM of the CVC. only 00237 * longword access possible, the following offsets are given in bytes. 00238 * 00239 * in the case of accessing non local crates by CAMAC cnaf's via VSB, the 00240 * shown address offset (CAM_CRT_OFF) between two consecutive crates is 00241 * automatically included by crate number contained in the cnaf. the effective 00242 * physical offset to the cnafs is 0x08180000 00243 */ 00244 /*----------------------------------------------------------------------------! 00245 ! VSB and CAMAC memory on the CVC slaves, seen from the MEB CVC ! 00246 ! ! 00247 ! ! 00248 ! 0x8000000 0x8200000 0x8400000 ! 00249 ! | | | ! 00250 ! | | | ! 00251 ! | VSB_CRT_OFF | VSB_CRT_OFF | ! 00252 ! V S B |===================|===================|===... ! 00253 ! | 0x200000 | 0x200000 | ! 00254 ! | | | ! 00255 ! | crate|1 crate|2 ! 00256 ! | | | ! 00257 ! VSB_CAM_START | (VSB_OFF = 0x0) ! 00258 !==============>| ! 00259 ! 0x8000000 | | | ! 00260 ! | crate|1 crate|2 ! 00261 ! | | | ! 00262 ! | CAM_OFF | CAM_CRT_OFF | CAM_CRT_OFF | ! 00263 ! C A M A C |================|===================|===================|==..! 00264 ! | 0x180000 | 0x200000 | 0x200000 | ! 00265 ! | | | | ! 00266 ! | | | | ! 00267 ! 0x8000000 0x8180000 0x8380000 0x8580000 ! 00268 !----------------------------------------------------------------------------*/ 00269 00270 //----------------------------END OF GO4 SOURCE FILE ---------------------
1.2.15