7044-270 IBM RS/6000 Model 270
IBM United States Sales Manual
Revised: April 12, 2011.
Type Model |
Announced |
Available |
Marketing Withdrawn |
Service Discontinued |
7044-270 | 2000/02/07 | 2000/02/25 |
2003/09/12 | - |
Back to top
IBM UNIX systems consist of the IBM eServer pSeries and IBM RS/6000
product lines. Providing unprecedented value, these innovative systems
feature IBM's leading-edge technology and run the top-rated UNIX
operating system, AIX. This broad product line ranges from powerful
workstations ideal for mechanical design; to mission-critical symmetric
multiprocessing (SMP) servers for ERP, SCM, CRM, transaction processing,
and Web serving; up to parallel RS/6000 SP systems that can handle
demanding scientific and technical computing and business intelligence
tasks. These platforms provide the power to create change and the
flexibility to manage it, with thousands of applications that provide
real value. More than 1,000,000 systems have shipped to over 135,000
businesses worldwide.
Model Abstract 7044-270
The IBM RS/6000 44P 7044 Model 270 provides a continuation of the
RS/6000 workstation and workgroup server family. It is an affordable
64-bit symmetric multiprocessing (SMP) system with extended floating-
point capabilities that offers significant performance enhancements over
the 43P 7043 Model 260. The Model 270 workstation lowers the cost of a
high-end design and analysis applications workstation while raising
levels of performance. It offers: a cost-effective solution as a
workgroup, technical server, or e-business server; a 1-, 2-, 3-, or 4-way
SMP system utilizing the 64-bit 375 MHz POWER3-II processor with either 4
MB or 8 MB Level 2 (L2) cache per processor or a 450 MHz POWER3-II 2-way
processor with 8 MB of L2 cache per processor to allow or full 64-bit SMP
application testing and deployment; expansion of system memory to 16 GB;
integration of Ethernet, Ultra2 SCSI, and a service processor within the
system; Five PCI slots: two 64-bit slots and three 32-bit slots; and
Five bays: a 1.44 MB, 3.5-inch diskette drive and an optical storage
device capable of reading a CD-ROM disc occupy two of the bays. It also
offers the availability of a variety of 2D and 3D graphics adapters that
position the Model 270 as a single-seat MCAD design and analysis
solution.
The AIX Version 4.3.3 or Version 5.1, or later, operating system is
included with each Model 270 and can be preinstalled, if desired.
Back to top
See Model Highlights.
Model Highlights 7044-270
The Model 270 -- An excellent 2D or 3D workstation or a powerful
workgroup server, your choice!
- General Features and Benefits
- Outstanding value -- up to four processors to lower the cost of a
symmetric multiprocessor system
- Up to 16 GB (available 2/9/01) for memory and compute-intensive
analysis, simulation, and modeling tasks.
- POWER3-II Microprocessor for enhanced performance
- AIX operating system
- Workstation Benefits
- Excellent performance for 3D CAD/CAM and petroleum visualization
applications
- Powerful analysis workstation for complex computational chemistry,
computational fluid dynamics, and structural analysis applications
- Server Benefits
- Powerful, affordable workgroup, technical or e-business server
- Improved floating-point performance to accelerate numerically
intensive compute applications
- Built-in service processor to ensure high system availability
Back to top
RS/6000 44P 7044 Model 270
Summary of standard features:
- 1-, 2-, 3-, and 4-way SMP design (1-and 2-way processor cards)
- 375 MHz or 450 MHz POWER3-II 64-bit processor
- 4 MB of L2 cache per processor
- 256 MB of ECC SDRAM memory
- 18.2 GB Ultra SCSI disk drive
- Two disk drive bays:
- 18.2 GB Ultra SCSI disk drive
- One available
- Three media bays:
- One optical storage device capable of reading a CD-ROM or DVD-RAM
disc
- 1.44 MB, 3.5-inch diskette drive
- One available (accommodates a disk drive with a mounting kit)
- Five PCI slots:
- Integrated:
- 10/100 Ethernet (IEEE 802.3 compliant)
- Ultra SCSI controller
- External Ultra2 SCSI Controller
- Service processor
- Ports:
- AUI and RJ45 Ethernet
- Parallel
- Two serial
- Keyboard
- Mouse
- Tablet
- Ultra2 SCSI
- Line in/out
- Support for:
- 32-bit applications
- 64-bit applications
- AIX Version 4.3.3, or Version 5.1, or later, operating system
The minimum Model 270 configuration must include a processor, an
optical storage device capable of reading a CD-ROM or DVD-RAM disc,
memory, and hard disk. The defaults, if no choice is made are:
- Processor -- 1-way 375 MHz (#4361)
- CD-ROM -- 32X Max speed CD-ROM (#2624)
- Memory -- 256 MB (#4098 - memory card and #4110 - memory DIMM)
- Disk Drive -- to an 18.2 GB drive (#2909)
A keyboard, mouse, graphics adapter, and monitor are available as
options.
Shipment Group:
The RS/6000 Model 270 is shipped with:
- Language group, which includes system publications (the appropriate
specify code must be in order.)
- Power Cord
- Diagnostics
Reliability, Availability, and Serviceability (RAS)
Reliability, Fault Tolerance, and Data Integrity
The reliability of the Model 270 system starts with reliable
components, devices, and sub-systems. During the design and development
process, sub-systems go through rigorous verification and integration
testing processes. During system manufacturing, systems go through a
thorough testing process to ensure highest product quality level.
The Model 270 system L2 Cache and system memory offers ECC (error
checking and correcting) fault-tolerant features. ECC is designed to
correct environmentally induced single-bit intermittent memory failures
as well as single-bit hard failures. With ECC, the likelihood of memory
failures will be substantially reduced. ECC also provides double-bit
memory error detection that helps protect data integrity in the event of
a double-bit memory failure. System memory also provides 4-bit packet
error detection that helps to protect data integrity in the event of a
DRAM chip failure. The system bus, I/O bus, and PCI buses are designed
with parity error detection.
Disk mirroring and disk controller duplexing capability are also
provided by the AIX operating system.
The Journaled File System of the AIX operating system maintains file
system consistency and reduces the likelihood of data loss when the
system is abnormally halted due to a power failure.
Service Processor
A Service Processor included in the Model 270 is designed to provide
an immediate means to diagnose, check status, and sense operational
conditions of a remote system, even when the main processor is
inoperable.
The Service Processor enables firmware and operating system
surveillance, several remote power controls, environmental monitoring,
reset, and boot features along with remote maintenance and diagnostic
activities, including console mirroring. The Service Processor can place
calls to report surveillance failures, critical environmental faults, and
critical processing faults.
Fault Monitoring Functions
- BIST (Built-in self-test) and POST (Power-on self-test) check
processor, L2 cache, memory, and associated hardware required for proper
booting of the operating system, every time the system is powered on. If
a non-critical error is detected or if the errors occur in the resources
that can be removed from the system configuration, the booting process
will proceed to completion. The errors are logged in the system non-
volatile RAM (NVRAM).
- Disk drive fault tracking can alert the system administrator of an
impending disk failure before it impacts customer operation.
- AIX log facility (where hardware and software failures are recorded
and analyzed by Error Log Analysis (ELA) routine) provides warning to the
system administrator on the causes of system problems. This also enables
IBM service representatives to bring along needed replacement hardware
components when a service call is placed, thus minimizing system repair
time.
Mutual Surveillance
The Service Processor can monitor the operation of the firmware during
the boot process, and it can monitor the operating system for loss of
control. It also allows the operating system to monitor for Service
Processor activity. The Service Processor can take appropriate action,
including calling for service, when it detects the firmware or the
operating system has lost control. Likewise, the operating system can
request a Service Processor repair action if necessary.
Environmental Monitoring Functions
- Temperature monitoring that increases the fan speed rotation when
ambient temperature is above the normal operating range.
- Temperature monitoring to warn the system administrator of potential
environmental related problems (for example, air conditioning and air
circulation around the system) so that appropriate corrective actions can
be taken before a critical failure threshold is reached, and to provide
orderly system shutdown when operating temperature exceeds the critical
level.
- Fan speed monitoring to provide warning and an orderly system
shutdown when the speed is out of operational specification.
- DC voltages monitoring to provide warning and an orderly system
shutdown when the voltages are out of operational specification.
- AC power loss sensing to provide an orderly system shutdown.
Error Handling and Reporting
In the unlikely event of system hardware or environmentally-induced
failure, the system "Run-time Error Capture" capability is designed to
systematically analyze the hardware error signature to determine the
cause of failure. The analysis result will be stored in system NVRAM.
When the system can be successfully rebooted either manually or
automatically, the error will be reported to the AIX operating system.
The ELA can be used to display the failure cause and the physical
location of failing hardware.
With the integrated Service Processor, the system has the ability to
send out automatically an alert via phone line to a pager or call for
service in the event of critical system failure.
Availability Enhancement Functions
- On-line (Concurrent) Diagnostics with ELA and Service Aids allows
administrators or IBM service representatives to diagnose potential
system malfunctions without interrupting end-user operation.
- The auto-restart (reboot) option, when enabled, can reboot the system
automatically following an unrecoverable software error, software hang,
hardware failure, or environmentally-induced (AC power) failure.
Serviceability
The Model 270 is designed for customer setup of the machine and for
subsequent addition of most features (adapters/devices). For a fee, IBM
Service can perform the installation.
The Model 270 allows support personnel to remotely log into a system
to review error logs and perform remote maintenance. The Model 270
Service Processor enables the analysis of a system that will not boot.
The diagnostics consist of Stand-alone Diagnostics (system dedicated
to service) and Online Diagnostics.
Online Diagnostics, when installed, are resident with AIX on the disk
or system. They can be booted in single-user mode (service mode), run in
maintenance mode, or run concurrently (concurrent mode) with other
applications. They have access to the AIX Error Log and the AIX
Configuration Data.
Service mode allows checking of system devices and features.
Concurrent mode allows the normal system functions to continue while
selected resources are being checked.
Maintenance mode allows checking of most system resources.
The System Management Services (SMS) error log is accessible from the
SMS menu for tests performed through SMS programs. The Service Processor
error log is accessible from the Service Processor menu for results of
Service Processor tests.
Service Director for RS/6000
The Service Director for RS/6000 is available at no additional charge,
if the RS/6000 processor is covered by an IBM Warranty or IBM Maintenance
Service Agreement. When installed on the RS/6000, the Service Director
for RS/6000 can enhance IBM's ability to provide the system with
maintenance service.
The Service Director for RS/6000:
- Monitors and analyzes system errors, and if needed, can place
automatically a service call to IBM without customer intervention.
- Can reduce the effect of business disruptions due to unplanned system
outages and failures.
- Performs problem analysis on a subset of hardware-related problems
and, with customer authorization, can report automatically the results to
IBM Service.
Online Customer Support (OCS)
OCS for hardware problem reporting may be performed via remote login
by RS/6000 specialists using normal AIX facilities. The Service
Director/6000 for RS/6000 software can also be used for this capability.
AIX Support offerings will be under AIXSERV and Service Director/6000
for RS/6000.
CPU GARD
CPU GARD, or processor run-time deconfiguration, is a RAS enhancement
function implemented in the system firmware, service processor firmware,
and AIX operating system (Version 4.3.3 + APAR IY06844, or later) for
dynamically removing CPUs from the system configuration during run-time.
The objective is to minimize system failures or data integrity exposures
due to a faulty processor. The processor to be removed is the one that
has experienced repeated run-time recoverable internal errors (over a
pre-defined threshold).
When a processor's internal recoverable error reaches a pre-defined
threshold, the firmware is designed to notify the AIX operating system.
The AIX operating system migrates all software processes and interrupts
to another processor and puts the faulty processor in "stop state."
CPUs that are deconfigured at run-time remain off-line for subsequent
reboots via the CPU Boot Time Deconfiguration function until the faulty
CPU hardware is replaced. The user can also enable and disable this RAS
function via the AIX system management services.
Back to top
With its performance, SMP capability, and advanced graphics, the 7044
Model 270 is well positioned in the mid-range and high-end MCAD
workstation price point. Its enhanced floating-point capability and
overall computing capability extends opportunities by providing a single
seat MCAD design and analysis solution. The Model 270 is at the high-end
of our workstation offerings, replacing the 7043-260 as our design and
analysis workstation.
The Model 270's 4-way SMP capability and up to 16 GB of memory
(available 2/9/01) of memory also make it an excellent solution for many
demanding technical and commercial applications. It replaces the Model
260 as a deskside SMP technical server. It is a cost-effective
performance alternative to the Models 7025-F40 or F50 for commercial
customers who do not require the expansion capabilities that these models
offer.
The Model 270 offers the performance of some larger systems, yet
connects to standard office power connections available worldwide.
Back to top
Model Summary Matrix
Optical
Processor Clock System Internal Storage Maximum
Model Type Rate Memory Storage Device Slots/Bays
----- --------- ------ ---------- -------------- -------- ----------
270 Power3-II 375/ 256MB/16GB 18.2GB/220.2GB A CD-ROM 5/5
450MHz readable
device
Customer Setup (CSU)
The RS/6000 7044 Model 270 is Customer Setup.
Devices Supported
The following external machine types are supported on the indicated
models for MT 7044.
This list is not all inclusive. Many devices are supported through
standard ports. Please refer to the sales manual of the external machine
type and the list of supported devices in the appropriate section of the
AIX sales manual for further attach support information.
The Microsoft Natural Keyboard Elite (English) is supported on the
RS/6000 44P 7044 Model 270.
|2| X = SUPPORTED DEVICE
|7|
|0|
MT-MOD| | DESCRIPTION
---------|-|-----------------------------------------
---------+-+--------DISK-----------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2104-DL1 |X| Expandable Storage Plus
2104-DU3 |X| Expandable Storage Plus (drawer)
2104-TL1 |X| Expandable Storage Plus
2104-TU3 |X| Expandable Storage Plus (tower)
2105-E10 |X| IBM Enterprise Storage Server
2105-E20 |X| IBM Enterprise Storage Server
2105-F10 |X| IBM Enterprise Storage Server
2105-F20 |X| IBM Enterprise Storage Server
7131-105 |X| Multi-Storage Tower
7131-405 |X| SSA Multi-Storage Tower
7133-010 |X| SSA Disk Subsystem (Rack-Mounted)
7133-020 |X| SSA Disk Subsystem (Rack-Mounted)
7133-500 |X| SSA Disk Subsystem
7133-600 |X| SSA Disk Subsystem
7133-D40 |X| Serial Disk System Advanced Model D40
7133-T40 |X| Serial Disk System Advanced Model T40
7137-412 |X| Disk Array Subsystem (1.97 - 6.91 GB)
7137-413 |X| Disk Array Subsystem (3.94 - 13.77 GB)
7137-414 |X| Disk Array Subsystem (8.39 - 29.36 GB)
7137-415 |X| Disk Array Subsystem (17.7 - 70.83 GB)
7203-001 |X| Portable Disk Drive
7204-010 |X| 1 GB Disk Drive
7204-112 |X| 1.1 GB Fast/Wide Disk Drive
7204-113 |X| 2.2 GB Fast/Wide Disk Drive
7204-114 |X| 4.5 GB Fast/Wide Disk Drive
7204-118 |X| IBM 7204-118 18GB SE External Disk Drive
7204-139 |X| 9.1 GB Fast/Wide Disk Drive
7204-215 |X| 2 GB Differential Disk Drive
7204-315 |X| 2 GB Differential Fast/Wide Disk Drive
7204-317 |X| 2.2 GB Differential Fast/Wide Disk Drive
7204-325 |X| 4.5 GB Differential Fast/Wide Disk Drive
7204-339 |X| 7204 Model 339 9.1 GB External Disk Drive
7204-402 |X| 7204 Model 402 External 2.2 GB Disk Drive
7204-404 |X| 7204 Model 404 External 4.5 GB Disk Drive
7204-409 |X| 7204 External Disk Drive Models 409
7204-418 |X| IBM 7204-418 18GB DE External Disk Drive
7204-419 |X| 7204 External Disk Drive Models 419
7204-518 |X| IBM 7204 Model 518 18.3 GB External Disk Drive
7204-536 |X| IBM 7204 Model 536 36.7 GB External Disk Drive
---------+-+--------GRAPHICS RELATED-----------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
6093-011 |X| CursorPad Tablet
6093-012 |X| Large Tablet
6093-021 |X| IBM Tablet Model 021
6094-010 |X| Dials
6094-020 |X| LPF Keyboard
6094-030 |X| Spaceball
6094-031 |X| Spaceball
6094-040 |X| Spaceball
6094-600 |X| Magellan Enhanced Input Device
7250-002 |X| POWER GXT1000 Graphics Accelerator
---------+-+--------DISPLAYS-------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
6546-00E |X| G52 Display
6546-00N |X| G52 Display
6546-01E |X| G52 Display
6546-01S |X| G52 Display
6546-0AE |X| G54 Display
6546-0AN |X| G54 Display
6546-0BE |X| G54 Display
6546-0BN |X| G54 Display
6546-0BS |X| G54 Display
6546-21N |X| G52 Display
6546-2BN |X| G54 Display
6546-31N |X| G52 Display
6546-4AN |X| G54 Display
6546-6BN |X| G54 Display
6555-763 |X| P70 17" COLOR DISPLAY
6555-764 |X| P70 17" COLOR DISPLAY
6555-773 |X| P200 UV-N COLOR MONITOR
6555-774 |X| P200 UV-N COLOR MONITOR
6555-803 |X| P201 UV-N COLOR MONITOR
9513-AG2 |X| IBM T55A 15" TFT LCD COLOR MONITOR
9513-AW1 |X| IBM T55A 15" TFT LCD COLOR MONITOR
9516-B03 |X| 16.1" TFT LCD DISPLAY
9516-B04 |X| 16.1" TFT LCD DISPLAY
---------+-+--------SCSI DEVICES---------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
3995-C60 |X| Optical Library Dataserver (1 Drive)
3995-C62 |X| Optical Library Dataserver (2 Drives)
3995-C64 |X| Optical Library Dataserver (2 Drives)
3995-C66 |X| Optical Library Dataserver (4 Drives)
3995-C68 |X| Optical Library Dataserver (4 Drives)
7209-002 |X| Optical Disk Drive
7209-003 |X| Optical Disk Drive
7210-005 |X| CD-ROM Drive
7210-010 |X| CD-ROM Drive (Quad speed)
7210-015 |X| CD-ROM Drive
7210-020 |X| IBM 7210 External CD-ROM Drive Model 020
7210-025 |X| IBM 7210 DVD-RAM Drive Model 025
| |
---------+-+--------TAPE-----------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
3490-F00 |X| 3490 Model F00 IBM Magnetic Tape Subsystem
3490-F01 |X| 3490 Model F01 IBM Magnetic Tape Subsystem
3494-B18 |X| 3494 Model B18 Virtual Tape Server
3494-L12 |X| Tape Library Dataserver
3570-B00 |X| IBM Magstar MP 3570 Model B00 Tape Subsystem
3570-B01 |X| IBM Magstar MP 3570 Model B01 Tape Subsystem (Floor
| | Library, 1 Drive)
3570-B02 |X| Tape Subsystem (2 Drives)
3570-B11 |X| IBM Magstar MP 3570 Model B11 Tape Subsystem (Rack
| | Mounted, 1 Drive)
3570-B12 |X| IBM Magstar MP 3570 Model B12 Tape Subsystem (Rack
| | Mounted, 2 Drives)
3570-B1A |X| IBM Magstar MP Tape Drive Model B1A
3570-C00 |X| Magstar Magnetic Tape Subs * 1 Tape Lib (1), SCSI
3570-C01 |X| Magstar Magnetic Tape Subs * 1 Tape Lib (20), SCSI
3570-C02 |X| Magstar Magnetic Tape Subs * 2 Tape Lib (20), SCSI
3570-C11 |X| Magstar Magnetic Tape Subs * 1 Tape Lib (20), SCSI
3570-C12 |X| Magstar Magnetic Tape Subs * 2 Tape Lib (20), SCSI
3575-L06 |X| IBM MAGSTAR MP Tape Library DataServer - 60 CARTRIDGE
3575-L12 |X| IBM MAGSTAR MP Tape Library DataServer - 120 CARTRIDGE
3575-L18 |X| IBM Magstar MP Tape Library Dataserver Model L18
3575-L24 |X| IBM MAGSTAR MP Tape Library DataServer - 240 CARTRIDGE
3575-L32 |X| IBM MAGSTAR MP Tape Library DataServer - 320 CARTRIDGE
3580-H11 |X| LTO Bridge Box (HVD)
3580-H23 |X| IBM TotalStorage Ultrium 2 Tape Drive
3580-L11 |X| LTO Bridge Box (LVD)
3580-L23 |X| IBM TotalStorage Ultrium 2 Tape Drive
3581-H17 |X| LTO Autoloader (HVD)
3581-L17 |X| LTO Autoloader (LVD)
3581-H23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader
3581-L23 |X| IBM TotalStorage Ultrium 2 Tape Autoloader
3583-L18 |X| LTO Tape Library - Scalable
3583-L36 |X| LTO Tape Library - Scalable
3583-L72 |X| LTO Tape Library - Scalable
3584-D22 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model D22 Expansion Frame
3584-D32 |X| Large LTO Tape Library HVD - Scalable
3584-D42 |X| IBM Ultrascalable Tape Library
3584-D52 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model D52 Expansion Frame
3584-HA1 |X| IBM TotalStorage 3584 High Availability Frame Model HA1
3584-L22 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model L22 Base Frame
3584-L32 |X| Large LTO Tape Library LVD - Scalable
3584-L52 |X| IBM TotalStorage UltraScalable Tape Library
| | 3584 Model L52 Base Frame
3590-B11 |X| High Performance Tape Subsystem
3590-B1A |X| High Performance Tape Subsystem
3590-C12 |X| Magstar Tape Subsyst Frame * Silo Comp Frame, att 4 3590
| | drives
3590-E11 |X| IBM Magstar Tape Subsystem
3590-E1A |X| IBM Magstar Tape Subsystem
3590-H11 |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H11
3590-H1A |X| IBM TotalStorage Enterprise Tape Drive 3590 Model H1A
7205-311 |X| DLT Tape Drive Bridge Box
7205-440 |X| 40 GB External Digital Linear Tape Drive
7206-005 |X| 4 GB 4mm Tape Drive
7206-110 |X| Cartridge Autoloader * 4mm, DDS-3, SCSI-2, DAT
7206-220 |X| External 20 GB 4mm DDS-4 Tape Drive
7206-VX2 |X| IBM 7206 Model VX2 External Tape Drive
7207-011 |X| 525 MB 1/4" Tape Drive
7207-012 |X| 1.2 GB 1/4" Tape Drive
7207-122 |X| 4GB External SLR5 QIC tape drive
7207-315 |X| 13 GB 1/4" Tape Drive
7208-011 |X| 5 GB 8mm Tape Drive
7208-341 |X| 7208 Model 341 20GB External 8mm Tape Drive
7208-345 |X| 7208 Model 345 60GB External 8mm Tape Drive
7331-205 |X| 8mm Tape Library
7331-305 |X| 7331 Model 305 8mm Tape Library
7332-005 |X| 4mm DDS-2 Tape Autoloader
7332-110 |X| Cartridge Autoloader * 4mm, DDS-3, SCSI-2, DAT
7332-220 |X| 4mm DDS-4 Tape Cartridge Autoloader
7334-410 |X| 8mm Tape Library
7336-205 |X| 4mm Tape Library
7337-305 |X| 7337 Model 305 Digital Linear Tape Subsystem
7337-306 |X| 7337 Model 306 Digital Linear Tape Subsystem
7337-360 |X| 7337 Digital Linear Tape Library
9348-012 |X| 1/2" 9-Track Magnetic Tape Unit
---------+-+--STORAGE NETWORK DEVICES----------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2108-G07 |X| Storage Area Network Data Gateway
2108-R03 |X| Storage Area Network Gateway Router
---------+-+--SWITCH---------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2031-016 |X| Mcdata Model 016 Departmental ES-2032 Fabric Switch
2031-032 |X| Mcdata Model 032 Departmental ES-2032 Fabric Switch
2031-L00 |X| Mcdata Model L00 ES-1000 Loop Switch
2032-001 |X| Mcdata ED-5000 Enterprise Fibre Channel Switch
2032-064 |X| Mcdata Model 064 Enterprise Fibre Channel Director
2042-001 |X| Inrange FC/9000 64-port Fibre Channel Switch
2042-128 |X| Inrange FC/9000 128-port Fibre Channel Director
2109-S08 |X| IBM SAN Fibre Channel Switch Model S08
2109-S16 |X| IBM SAN Fibre Channel Switch Model S16
---------+-+--EXPANSION CABINETS---------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - -
2032-C36 |X| Mcdata Model 0C3 FC-512 Cabinet for Mcdata Director
2032-C40 |X| Inrange 40u Cabinet
7014-T00 |X| 1.8 Meter Rack - 36U
7014-T42 |X| 2.0 Meter Rack - 42U
Feature Availability Matrix
The following feature availability matrix for MT 7044 uses the letter
"A" to indicate features that are available and orderable on the
specified models. "S" indicates a feature that is supported on the new
model during a model conversion; these features will work on the new
model, but additional quantities of these features cannot be ordered on
the new model; they can only be removed. "N" indicates that the feature
is not supported on the new model and must be removed during the model
conversion. As additional features are announced, supported, or
withdrawn, this list will be updated. Please check with your Marketing
Representative for additional information.
|2| A = AVAILABLE S = SUPPORTED
|7| N = NOT SUPPORTED, MUST BE REMOVED
|0|
| |
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
0001 |S| After-market (MES) Order Indicator
0986 |A| CCS Customer Service Specify (US)
1736 |S| Expedited Delivery Service Indicator
2111 |S| PCI SCSI Adapter To 2-Port, 8-Bit SE External Device Cable
2112 |S| PCI SCSI Adapter To 2-Port, 8-Bit Differential Ext Device
| | Cable
2113 |S| PCI SCSI Adapter To Single Port 8-Bit SE External Device
| | Cable
2114 |S| PCI SCSI Adapter 16-Bit Differential External Y Cable
2115 |S| PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable
2116 |S| PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device
| | Cable
2117 |S| PCI SCSI Adapter 16-bit SE External Y Cable
2118 |S| Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
2424 |S| 0.6M 16-bit SCSI-2 System to System Cable
2425 |S| 2.5M 16-bit SCSI-2 System to System Cable
2456 |A| LC-SC 50 Micron Fibre Converter Cable
2459 |A| LC-SC 62.5-Micron Fiber Converter Cable
2494 |S| PCI 3-Channel Ultra2 SCSI RAID Adapter
2498 |S| PCI 4-Channel Ultra3 SCSI RAID Adapter
2623 |S| 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
2624 |S| 32X (Max) SCSI-2 CD-ROM Drive
2627 |S| 4.7 GB SCSI-2 DVD-RAM Drive (White Bezel)
2639 |S| Ultimedia Video Capture Adapter/S - PCI
2708 |S| Eicon ISDN DIVA PRO 2.0 PCI S/T Adapter
2709 |S| ARTIC960Hx 4-Port T1 RJ48 Cable
2710 |S| ARTIC960Hx 4-Port E1 RJ48 Cable
2741 |S| SysKonnect SK-NET FDDI-LP SAS PCI
2742 |S| SysKonnect SK-NET FDDI-LP DAS PCI
2743 |S| SysKonnect SK-NET FDDI-UP SAS PCI
2823 |S| POWER GXT2000P Graphics Accelerator
2825 |S| POWER GXT3000P Graphics Accelerator
2826 |S| POWER GXT4000P Graphics Accelerator
2827 |S| POWER GXT6000P Graphics Accelerator
2830 |S| POWER GXT130P Graphics Accelerator
2841 |S| POWER GXT300P Graphics Accelerator
2842 |A| POWER GXT4500P Graphics Accelerator
2843 |A| POWER GXT6500P Graphics Accelerator
2849 |S| POWER GXT135P Graphics Accelerator with Digital Support
2861 |S| ARTIC960Hx 4-Port EIA-232 Cable
2862 |S| ARTIC960Hx 4-Port RS-449 Cable
2863 |S| ARTIC960Hx 4-Port X.21 Cable
2864 |S| ARTIC960Hx 4-Port V.35 (DTE) Cable
2865 |S| ARTIC960Hx 4-Port EIA-530 Cable
2871 |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
2872 |S| IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
2873 |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port
| | Cable
2874 |S| IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M
| | Extension Cable
2875 |S| IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded,
| | 1.8M 4-Port Cable
2876 |S| IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Ungrounded,
| | 1.8M 4-Port Cable
2877 |S| IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
2878 |S| IBM ARTIC960RxD Quad DTA, SC Bus, 5-Drop Cable
2879 |S| IBM ARTIC960RxD Quad DTA, Four H.100 to SC bus Converter
| | Cable
2906 |S| 9.1GB 10,000 RPM Ultra-SCSI 16-bit Enhanced Disk Drive
2908 |S| 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive
2909 |S| 18.2 GB Ultra-SCSI 1" High (25mm) Disk Drive
2934 |A| Asynchronous Terminal/Printer Cable EIA-232
2936 |A| Asynchronous Cable EIA-232/V.24
2943 |S| 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
2944 |S| 128-Port Asynchronous Controller, PCI bus
2945 |S| Asynchronous Terminal Cable - EIA-422A
2946 |S| Turboways 622 Mbps PCI MMF ATM Adapter
2947 |S| IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
2951 |S| Cable, V.24 / EIA-232
2952 |S| Cable, V.35
2953 |S| Cable, V.36 / EIA-499
2954 |S| Cable, X.21
2962 |S| 2-Port Multiprotocol PCI Adapter
2963 |S| TURBOWAYS 155 PCI UTP ATM Adapter
2968 |S| IBM 10/100 Mbps Ethernet PCI Adapter
2969 |S| Gigabit Ethernet - SX PCI Adapter
2975 |S| 10/100/1000 Base-T Ethernet PCI Adapter
2988 |S| TURBOWAYS 155 PCI MMF ATM Adapter
2998 |S| TURBOWAYS 25 ATM PCI Adapter
3027 |S| 9.1GB 10,000 RPM Ultra-SCSI Disk Drive
3029 |S| 9.1GB Ultra-SCSI 16-bit Enhanced Disk Drive
3102 |S| 18.2 GB 10,000 RPM Ultra SCSI Disk Drive
3103 |S| 18.2GB Ultra-SCSI Enhanced Disk Drive
3110 |S| 18.2GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
3118 |S| 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive
3119 |S| 36.4GB 10,000 RPM Ultra SCSI Disk Drive
3128 |S| 36.4GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
3124 |A| Serial to Serial Port Cable for Drawer/Drawer
3125 |A| Serial to Serial Port Cable for Rack/Rack
3163 |S| 73.4 GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
3627 |S| IBM P76/P77 Color Monitor, Business Black, Captured Cable
3628 |S| IBM P260/P275 Color Monitor, Business Black, and Cable
3629 |S| IBM P76/P77 Color Monitor, Pearl White, Captured Cable
3630 |S| IBM P260/P275 Color Monitor, Pearl White, and Cable
3635 |S| T210 Flat-Panel Monitor
3636 |S| L200P Flat Panel Monitor
3637 |S| IBM T541H/L150p 15" TFT Color Monitors, Business Black,
| | Captured Cable
3638 |S| IBM C220p 21-inch Color Monitor, Business Black, and Cable
3639 |S| IBM ThinkVision L170p Flat Panel Monitor
3640 |S| IBM ThinkVision L171p Flat Panel Monitor
3642 |S| ThinkVision L191p Flat Panel Monitor
3752 |S| Service Package
3753 |S| Options Library (hard copy)
3925 |A| Serial Port Converter Cable, 9-Pin to 25-Pin
3926 |S| Async Printer/Terminal Cable, 9-pin to 25-pin, 4m
4098 |S| Memory Expansion Feature (16 POS)
4110 |S| 256MB(2X128MB) DIMMS, 200 pin 10NS SDRAM
4119 |S| 512MB (2X256MB) DIMMs, 200-pin 10NS SDRAM
4120 |S| 512MB (2x256MB)Memory DIMMS
4121 |S| 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM
4217 |S| 6091 Attachment Cable
4223 |S| Ethernet 10Base2 Transceiver
4224 |S| Ethernet 10BaseT Transceiver
4237 |S| 13W3 to 15-pin DDC/ID Bits Switchable Display Cable
4238 |S| DDC 15 Pin to 13W3 Display Cable
4239 |S| 15-D Adapter to 3BNC ID Cable
4242 |A| 6 Foot Extender Cable for Displays (15 pin D-shell to 15
| | pin D-shell)
4361 |S| 1-way 375 MHz POWER3-II Processor Card
4362 |S| 2-way 375 MHz POWER3-II Processor Card
4365 |S| 2-WAY 375MHz POWER3-II Processor Card (8MB L2/Processor)
4366 |S| 2-WAY 450MHz POWER3-II Processor Card (8MB L2/Processor)
4951 |S| IBM Four Port 10/100 Ethernet Adapter
4953 |S| IBM 64bit/66MHz PCI ATM 155 UTP Adapter
4957 |S| IBM 64bit/66MHz PCI ATM 155 MMF Adapter
4958 |S| PCI Cryptographic Coprocessor
4959 |S| IBM Token-Ring PCI Adapter
4960 |S| IBM e-business Cryptographic Accelerator
4961 |S| IBM Universal 4-Port 10/100 Ethernet Adapter
4962 |S| 10/100 Mbps Ethernet PCI Adapter II
4963 |N| PCI Cryptographic Coprocessor (FIPS-4)
4964 |S| PCI Cryptographic Coprocessor
5001 |S| Customer Service Specify
5005 |A| Software Preinstall
5700 |A| IBM Gigabit Ethernet-SX PCI-X Adapter
5701 |A| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
5706 |A| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
5707 |A| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
6041 |S| 3-Button Mouse
6120 |S| IBM 80/160 GB Internal Tape Drive with VXA Technology
6134 |N| 60/150 GB 16-bit 8mm Internal Tape Drive
6154 |S| 20/40GB 16-bit 8mm Internal Tape Drive (White Bezel)
6156 |S| 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)
6158 |S| 20/40GB 4mm Internal Tape Drive
6159 |S| 12/24GB 4mm Internal Tape Drive
6203 |S| PCI Dual Channel Ultra3 SCSI Adapter
6204 |S| PCI Universal Differential Ultra SCSI Adapter
6205 |S| PCI Dual Channel Ultra2 SCSI Adapter
6206 |S| PCI Single-Ended Ultra SCSI Adapter
6227 |S| Gigabit Fibre Channel Adapter PCI Bus
6228 |S| Gigabit Fibre Channel Adapter for 64-bit PCI Bus
6230 |S| Advanced SerialRAID Plus Adapter
6231 |S| 128 MByte DRAM Option Card
6235 |S| 32 MByte Fast-Write Cache Option Card
6239 |S| 2 Gigabit Fibre Channel PCI-X Adapter
6310 |S| IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
6311 |S| IBM ARTIC960RxF PCI Adapter for RS/6000
6505 |S| Carrier for Ultra-SCSI 16-bit Disk
6508 |S| Media Bay Disk Drive Mounting Kit
6600 |S| Quiet Touch Keyboard, US English, #103P
6601 |S| Quiet Touch Keyboard, French, #189
6602 |S| Quiet Touch Keyboard, Italian, #142
6603 |S| Quiet Touch Keyboard, German/Austrian, #129
6604 |S| Quiet Touch Keyboard, UK English, #166
6605 |S| Quiet Touch Keyboard, Spanish, #172
6606 |S| Quiet Touch Keyboard, Japanese, #194
6609 |S| Quiet Touch Keyboard, Belgian/French, #120
6610 |S| Quiet Touch Keyboard, Belgian/UK-Flemish, #120
6611 |S| Quiet Touch Keyboard, Swedish/Finnish, #153
6612 |S| Quiet Touch Keyboard, Danish, #159
6614 |S| Quiet Touch Keyboard, Swiss,French/German, #150f/g
6616 |S| Quiet Touch Keyboard, Norwegian, #155
6619 |S| Quiet Touch Keyboard, Greek, #319
6620 |S| Quiet Touch Keyboard, Hebrew, #212
6629 |S| Quiet Touch Keyboard, LA Spanish, #171
6630 |S| Quiet Touch Keyboard, Arabic, #238
6633 |S| Quiet Touch Keyboard, Korean, #413
6634 |S| Quiet Touch Keyboard, Chinese/US, #467
6638 |S| Quiet Touch Keyboard, Russian, #443
6640 |S| Quiet Touch Keyboard, US English ISO9995, #103P
7305 |A| AAP Software Pre-Install Indicator
8131 |S| 128-Port Asynchronous Controller Cable, 4.5 Meter
8132 |S| 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
8133 |S| RJ-45 to DB-25 Converter Cable
8135 |S| 64-Port to 128-Port Pin-Out Converter
8137 |S| Enhanced Remote Asynchronous Node 16-Port EIA-232
8138 |S| Enhanced Remote Asynchronous Node 16-Port RS-422
8422 |S| Spaceball 3D Input Device
8423 |S| Magellan XT 3D Input Device
8700 |S| Quiet Touch Keyboard - Business Black, US English, #103P
8701 |S| Quiet Touch Keyboard - Business Black, French, #189
8702 |S| Quiet Touch Keyboard - Business Black, Italian, #142
8703 |S| Quiet Touch Keyboard - Business Black, German/Austrian, #129
8704 |S| Quiet Touch Keyboard - Business Black, UK English, #166
8705 |S| Quiet Touch Keyboard - Business Black, Spanish, #172
8706 |S| Quiet Touch Keyboard - Business Black, Japanese, #194
8707 |S| Quiet Touch Keyboard - Business Black, Brazilian Portuguese,
| | #275
8708 |S| Quiet Touch Keyboard - Business Black, Canadian French, #058
8709 |S| Quiet Touch Keyboard - Business Black, Belgian/French, #120
8710 |S| Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish,
| | #120
8711 |S| Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153
8712 |S| Quiet Touch Keyboard - Business Black, Danish, #159
8713 |S| Quiet Touch Keyboard - Business Black, Bulgarian, #442
8714 |S| Quiet Touch Keyboard - Business Black, Swiss,French/German,
| | #150f/g
8716 |S| Quiet Touch Keyboard - Business Black, Norwegian, #155
8717 |S| Quiet Touch Keyboard - Business Black, Dutch, #143
8718 |S| Quiet Touch Keyboard - Business Black, Portuguese, #163
8719 |S| Quiet Touch Keyboard - Business Black, Greek, #319
8720 |S| Quiet Touch Keyboard - Business Black, Hebrew, #212
8721 |S| Quiet Touch Keyboard - Business Black, Hungarian, #208
8722 |S| Quiet Touch Keyboard - Business Black, Icelandic, #197
8723 |S| Quiet Touch Keyboard - Business Black, Polish, #214
8724 |S| Quiet Touch Keyboard - Business Black, Romanian, #446
8725 |S| Quiet Touch Keyboard - Business Black, Slovakian, #245
8726 |S| Quiet Touch Keyboard - Business Black, Czech, #243
8727 |S| Quiet Touch Keyboard - Business Black, Turkish, #179
8728 |S| Quiet Touch Keyboard - Business Black, Turkish, #440
8729 |S| Quiet Touch Keyboard - Business Black, LA Spanish, #171
8730 |S| Quiet Touch Keyboard - Business Black, Arabic, #238
8732 |S| Quiet Touch Keyboard - Business Black, Serbian-Cyrillic, #118
8733 |S| Quiet Touch Keyboard - Business Black, Korean, #413
8734 |S| Quiet Touch Keyboard - Business Black, Chinese/US, #467
8735 |S| Quiet Touch Keyboard - Business Black, French Canadian, #445
8736 |S| Quiet Touch Keyboard - Business Black, Thailand, #191
8738 |S| Quiet Touch Keyboard - Business Black, Russian, #443
8739 |S| Quiet Touch Keyboard - Business Black, Croatian, #105
8740 |S| Quiet Touch Keyboard - Business Black, US English ISO9995,
| | #103P
8741 |S| 3-Button Mouse - Business Black
9004 |A| Southern Hemisphere Designator for Monitors
9300 |A| Language Group Specify - US English
9703 |A| Language Group Specify - French
9704 |A| Language Group Specify - German
9705 |A| Language Group Specify - Polish
9707 |A| Language Group Specify - Portuguese
9708 |A| Language Group Specify - Spanish
9711 |A| Language Group Specify - Italian
9712 |A| Language Group Specify - Canadian French
9714 |A| Language Group Specify - Japanese
9715 |A| Language Group Specify - Traditional Chinese (Taiwan)
9716 |A| Language Group Specify - Korean
9719 |A| Language Group Specify - Hungarian
9720 |A| Language Group Specify - Slovakian
9721 |A| Language Group Specify - Russian
9722 |A| Language Group Specify - Simplified Chinese (PRC)
9800 |A| Power Cord Specify - United States/Canada
9802 |A| Power Cord Specify - Brazil (125V, 15A)
9820 |A| Power Cord Specify - Belgium, Finland, France (250V, 16A)
9821 |A| Power Cord Specify - Denmark (250V, 10A)
9825 |A| Power Cord Specify - United Kingdom (250V, 13A)
9827 |A| Power Cord Specify - Israel (250V, 6-16A)
9828 |A| Power Cord Specify - Switzerland (250V, 10A)
9829 |A| Power Cord Specify - South Africa/Pakistan (250V, 16A)
9830 |A| Power Cord Specify - Italy (250V, 10A and 16A)
9831 |A| Power Cord Specify - Argentina (250V, 10A)
9833 |A| Power Cord Specify - Thailand (250V, 15A)
9834 |A| Power Cord Specify - Uruguay (250V, 10A)
Model Conversions
None.
Power3-II Processor Conversion Features
RS/6000 7044 Model 270:
Customers with an RS/6000 7044 Model 270 workstation may want to
convert their existing 375 MHz Power3-II 1-or 2-way processor with 4 MB
of L2 cache per processor with a 2-way 375 MHz processor with 8 MB of L2
cache per processor via a feature conversion. The processor feature
conversion is available for field installation only. The existing
RS/6000 7044 Model 270 Power3-II processor being replaced must be
returned to IBM.
RS/6000 7044 Model 270 Power3-II Processor Conversions available:
From To
--------------------------------- ---------------------------------
FC#4361, 1-Way Power3-II 375 MHz FC#4362, 2-Way Power3-II 375 MHz
Processor with 4 MB of L2 cache Processor with 4 MB of L2 cache
per processor per processor
FC#4361, 1-Way Power3-II 375 MHz FC#4365, 2-Way Power3-II 375 MHz
Processor with 4 MB of L2 cache Processor with 8 MB of L2 cache
per processor per processor
FC#4362, 2-Way Power3-II 375 MHz FC#4365, 2-Way Power3-II 375 MHz
Processor with 4 MB of L2 cache Processor with 8 MB of L2 cache
per processor per processor
FC# 4361 1-Way Power3-II 375 MHz FC#4366. 2-way Power3-II 450MHz
Processor with 4 MB of L2 cache per Processor with 8 MB of L2 cache
Processor per Processor
FC# 4362 2-Way Power3-II 375 MHz FC#4366. 2-way Power3-II 450MHz
Processor with 4 MB of L2 cache per Processor with 8 MB of L2 cache
Processor Processor
FC# 4365 2-Way Power3-II 375 MHz FC#4366. 2-way Power3-II 450MHz
Processor with 8 MB of L2 cache per Processor with 8 MB of L2 cache
Processor processor
Note: 1-Way (FC#4361) or 2-Way (FC#4362) Power3-II 375 MHz Power3-II with
4 MB of L2 cache per processor can not be used with the 2-Way (FC#4365)
375 MHz Power3-II with 8 MB of L2 cache per processor.
Back to top
With Pedestal Without Pedestal
---------------- ----------------
Width: 340 mm (13.4 in) 222 mm ( 8.7 in)
Depth: 713 mm (28.1 in) 713 mm (28.1 in)
Height: 610 mm (24.0 in) 600 mm (23.6 in)
Weight: 37.0 kg ( 81 lb) - Minimum Configuration
45.0 kg ( 99 lb) - Maximum Configuration
- Temperature: 16 to 32 degrees C (60 to 90 F)
- Relative humidity: 8 to 80 (percent)
- Maximum wet bulb: 23 degrees C
- Operating voltage: 100 to 127 or 200 to 240 V AC
- Operating frequency: 48/62 Hz
- Electrical output: 297 watts (typical); 445 watts (maximum)
- Thermal Output: 1012 Btu/hour (typical); 1518 Btu/hour (maximum)
- Power source loading:
- 0.3 kVA (typical configuration)
- 0.47 kVA (maximum configuration)
Noise Level and Sound Power
- Sound Power: 5.4 Bels Idle/5.5 Bels Operating. Meets quiet office
standard for deskside systems.
EMC Conformance Classification
This equipment is subject to FCC rules and it shall comply with the
appropriate FCC rules before final delivery to the buyer or centers of
distribution.
- U.S.A.: FCC Class B
- Europe: CISPR 22 Class B
- Japan: VCCI-2
- Korea: Korean Requirement Class B
Homologation -- Telecom Environmental Testing (Safety and
EMC)
Homologation approval for specific countries has been initiated with
the IBM Homologation and Type Approval (HT&A) organization in LaGaude.
This IBM RS/6000 model and applicable features meet the environmental
testing requirements of the country TELECOM and have been designed and
tested in compliance with the Full Quality Assurance Approval (FQAA)
process as delivered by the British Approval Board for Telecom (BABT),
the U.K. Telecom Regulatory authority.
Product Safety/Country Testing/Certification
- UL 1950 Underwriters Laboratory, Safety Information
- CSA C22.2 No. 950-M86
- EN60950 European Norm
- IEC 950, Edition 1, International Electrotechnical Commission, Safety
Information
- Nordic deviations to IEC-950 1st Edition, as outlined in document
EMKO-TSE(05-SEC) 200/93
General Requirements
The product is in compliance with IBM Corporate Bulletin C-B
0-2594-000 Statement of Conformity of IBM Product to External Standard
(Suppliers Declaration).
Processor Cards
1-way (#4361) or 2-way (#4362) 375 MHz POWER3-II with 4 MB of L2 cache
per processor cannot be used with the 2-way (#4365) 375 MHz POWER3-II
with 8 MB of L2 cache per processor
1-way (#4361) or or 2-way (#4362) 375 MHz POWER3-II with 4 MB of L2
cache per processor and the 2-way (#4365) 375 MHz POWER3-II with 8 MB of
L2 cache per processor cannot be used with the 2-way (#4366) 450 MHz
POWER3-II with 8MB of L2 cache per processor
System Memory
- A maximum of 16 GB of system memory (2/9/01)
- A minimum of 256 MB of memory is required.
- One or two memory cards may be installed.
- The first memory card must be installed in memory card slot 2.
- Memory DIMMs must be ordered and installed in pairs on the memory
cards. They must be installed starting at the bottom of each card (card
slot J1 and J2) and then moving up. Reference Figure 1.
- All slots in the first memory card must be filled before a second
memory card is installed.
7044 Model 270 Systems with a serial number of "0076A7F" and above
support the 1GB memory feature (#4121)
Figure 1. 7044-270 Memory Card
___________________________________________________________
¤ _________________ ________________ ¤
¤ ¤_________________¤ J15 J16¤________________¤ ¤
¤ _________________ ________________ ¤
¤ ¤_________________¤ J13 J14¤________________¤ ¤
¤ _________________ ________________ ¤
¤ ¤_________________¤ J11 J12¤________________¤ ¤
¤ _________________ ________________ ¤
¤ ¤_________________¤ J9 J10¤________________¤ ¤
¤ _________________ ________________ ¤
¤ ¤_________________¤ J7 J8 ¤________________¤ ¤
¤ _________________ ________________ ¤
¤ ¤_________________¤ J5 J6 ¤________________¤ ¤
¤ _________________ ________________ ¤
¤ ¤_________________¤ J3 J4 ¤________________¤ ¤
¤ _________________ ________________ ¤
¤ ¤_________________¤ J1 J2 ¤________________¤ ¤
¤______________ ______________¤
¤______________________________¤
PCI Card Slots: There are five PCI slots in the Model 270
(reference Figure 2):
- Slots 1 and 2 are 64-bit and run at 50 MHz.
- Slots 3, 4, and 5 are 32-bit and run at 33 MHz.
- All slots are long slots.
Figure 2. 7044-270 Processor, Memory, and Adapter Slot
Locations
______________________________________
| __________________ ________________|___
|| | | Bay 2: Optical | |
|| Power Supply | | Storage Device | |
|| | |________________|___|
|| | ________________|___
|| | | Bay 3: Media | |
|| | | or Disk | |
||__________________| |________________|___|
| _ _ _ _ _ _ _ _ _ _ | _
| | Hard Disk 1 ||| |
| |_ _ _ _ _ _ _ _ _ _|||_ |
| _ _ _ _ _ _ _ _ _ _ | _
| | Hard Disk 2 ||| |
| |_ _ _ _ _ _ _ _ _ _||| _|
| _______________________________ __|___
CPU card slot 1 -- | |_______________________________||Operator
| _______________________________ |Panel |
CPU card slot 2 -- | |_______________________________||__|___|
| _______________________________ |
Memory card slot 1 -- | |_______________________________| |
| _______________________________ |
Memory card slot 2 -- | |_______________________________| |
| _______________________________ |
PCI slot 5 -- ||_______________________________| |
| _______________________________ |
PCI slot 4 -- ||_______________________________| |
| _______________________________ |
PCI slot 3 -- ||_______________________________| |
| _______________________________ |
PCI slot 2 -- ||_______________________________| |
| _______________________________ |
||_______________________________| |
| _______________________________ |
PCI slot 1 -- ||_______________________________| |
|______________________________________|
Figure 3. Memory Features
Feature
Feature Number Minimum Maximum
=================== ===== ======= =======
Memory Card 4098 1 2
256 MB 4110 0 8/card
(2 x 128 MB DIMMs)
512 MB 4119 0 8/card
(2 x 256 MB DIMMs)
512 MB 4120 0 8/card
(2 x 256 MB DIMMS)
1024 MB 4121 0 8/card
(2 X 512 MB DIMMs)
Graphics Adapters
- Graphics adapter, keyboard, and mouse are not required in the minimum
configuration.
- Extra space is provided between slots 1 and 2 to allow for additional
cooling for graphics adapters in slot 2.
- If GXT3000P is installed in slot 4, slot 3 will be unavailable.
- The maximum number of graphics adapters supported in the 7044-270 is
four total (any combination).
- Refer to Figure 4 for additional graphics adapter
limitations.
Figure 4. Graphics Adapters
Feature
Priority Adapter Number Max Slot Priority Size
-------- -------- ------ --- ------------- ----
1 GXT6000P 2827 2 2,4 long
1a GXT3000P 2825 2 2,4 long
1b GXT130P 2830 3 5,4,3 short
3 GXT6500P 2843 2 1,2,3,4,5 long
3a GXT4000P 2826 4 1,2,3,4,5 long
3b GXT4500P 2842 4 1,2,3,4,5 long
4 GXT2000P 2823 4 1,2,3,4,5 short
5 GXT300P 2841 4 1,2,3,4,5 short
I/O Adapters
- The SSA/RAID adapter (#6230) can be selected with or without the fast
write cache option (#6235).
- The fast write cache option (#6235) is a cache upgrade for the
SSA/RAID adapter (#6230) and can only be selected along with that
adapter.
- The video capture adapter (#2639) and the Ultra SCSI RAID adapter
(#2494) cannot be installed in the system at the same time.
- The maximum number of ARTIC960Hx RxD (#6310) and ARTIC960RxF PCI
(#6311) adapters installed in the system cannot exceed a combined total
of 4.
- Refer to Figure 5 for additional I/O adapter limitations.
Figure 5. I/O Adapter Features
Feature
Priority I/O Adapter Number Max Slot Priority Size
-------- ------------------------- ------- --- ------------- -----
2 Gigabit Fibre Channel 6228 2 1,2,3,4,5 short
2a Gigabit Fibre Channel 6227 2 2,3,4,5 short
3d Gigabit Ethernet 2969 5 1,2,3,4,5 short
3e Gigabit Ethernet (UTP) 2975 5 1,2,3,4,5 short
6 ISDN 2708 1 5,4,3 short
6a 4-port 10/100 Ethernet 4961 5 5,4,3,2,1 long
6b 4-port 10/100 Ethernet 4951 3 5,4,3,2,1 long
6c Cryptographic Coprocessor 4958 2 2,1 long
6d Cryptographic Coprocessor 4963 2 2,1 short
7 Ultra2 SCSI RAID 2494 2 5,4,3 long
8 Ultimedia Video Capture 2639 1 5,4,3 short
9 2-port Multiprotocol 2962 2 5,4,3 short
10a Dual Ultra3 SCSI 6203 2 1,2,3,4,5 long
11 Ultra2 SCSI 6205 2 1,2,3,4,5 long
11a Ultra3 SCSI RAIC 2498 4 1,2,3,4,5 long
11a Ultra3 SCSI RAIC 2498 4 1,2,3,4,5 long
12 ARTIC960Hx RxD 6310 3 5,4,3,2,1 long
12a ARTIC960RxF PCI 6311 3 5,4,3,2,1 long
12b 10/100 Ethernet 4962 5 5,4,3,2,1 long
14 SSA RAID5 6230 2 5,4,3,2,1 long
14a 128MB DIMM for #6230 6231 2 N/A N/A
14b Cache for #6230 6235 2 N/A N/A
15 ARTIC960Hx 4-port 2947 2 5,4,3,2,1 long
16 8-port Async 2943 2 5,4,3,2,1 short
17 128-port Async 2944 2 5,4,3,2,1 short
18 622 MMF ATM 2946 5 5,4,3,2,1 short
18a 155 UTP ATM 4953 5 5,4,3,2,1 short
18b 155 MMF ATM 4957 5 5,4,3,2,1 short
18b 155 MMF ATM 4957 5 5,4,3,2,1 short
18c 155 UTP ATM 2963 5 5,4,3,2,1 short
19 155 MMF ATM 2988 5 5,4,3,2,1 short
20 FDDI (Dual) 2742 5 5,4,3,2,1 short
21 FDDI (Single) 2741 5 5,4,3,2,1 short
22 CDDI (Single) 2743 5 5,4,3,2,1 short
23 4/16 Token Ring 4959 4 5,4,3,2,1 short
24 10/100 Ethernet 2968 5 5,4,3,2,1 short
26 Ultra SCSi Diff 6204 4 5,4,3,2,1 short
27 Cryptographic Accelerator 4960 4 5,4,3,2,1 short
Storage Devices/Bays
- Bay 3 (refer to Figure 6) can accommodate a second optical
storage device capable of reading a CD-ROM disc, tape drive or other
media device.
- A 4.5 GB (#2900), 9.1 GB (#2908 or #3027), 18.2 GB (#2909 or #3102),
36.4 GB (#3119), or 73.4 GB (#3118) can be installed in Bay 3 with a
mounting kit (#6508).
- Refer to Figure 7 for additional limitations for storage
devices.
Figure 6. Storage Device Locations (front view)
______________________________________________________
| |
| __________________________ |
| | Bay 2 Opt. Storage Device| |
| |__________________________| |
| __________________________ |
| | Bay 3 Media or Disk | |
| |__________________________| |
| _______ |
| ____________________________________ | | |
| | Bay 4 Hard Disk 1 | | Bay 1 | |
| | | | | |
| |____________________________________| | D | |
| | i | |
| ____________________________________ | s | |
| | Bay 5 Hard Disk 2 | | k | |
| | | | e | |
| |____________________________________| | t | |
| | t | |
| | e | |
| |_______| |
| |
| __________________________________________ |
| | | |
| | Operator Panel | |
| |__________________________________________| |
| |
|______________________________________________________|
Figure 7. Storage Device Features
Feature
Device Maximum Bay Number
====== ======= === ======
600 MB 32X CD-ROM 2 D02, D03 2624
4.7GB DVD-RAM 2 D02, D03 2623
9.1 GB Enhanced
Ultra SCSI Disk 2 D04, D05 3029
9.1 GB Enhanced 10 K rpm
Ultra SCSI Disk 2 D04, D05 2906
18.2 GB Enhanced
Ultra SCSI Disk 2 D04, D05 3103
18.2 GB Enhanced 10 K rpm
Ultra SCSI Disk 2 D04, D05 3110
36.4 GB Enhanced 10 K rpm 2 D04, D05 3128
Ultra SCSI Disk
73.4 GB Enhanced 10 k rpm 2 D04, D05 3163
Ultra SCSI Disk
9.1 GB Ultra SCSI Disk
(Bay 3) 1 D03 2908
9.1 GB 10 K rpm
Ultra SCSI Disk 1 D03 3027
18.2 GB Ultra SCSI Disk
(Bay 3) 1 D03 2909
36.4 GB 10 K rpm Ultra 1 D03 3119
SCSI Disk
18.2 GB 10 K rpm
Ultra SCSI Disk 1 D03 3102
73.4 GB 10 k rpm Ultra 1 D03 3118
SCSI Disk
Bay 3 Mounting Kit 1 D03 6508
4 mm 12/24 GB Tape 1 D03 6159
8 mm 20/40 GB Tape 1 D03 6156
4 mm 20/40 GB Tape 1 D03 6158
Either an IBM supported ASCII terminal with an attachment cable or a
graphics display with an attachment cable and graphics adapter is
required for initial set up and must be available locally for service.
If an ASCII terminal is used, it must be attached through a serial port.
Display Cable Feature Number Matrix
The following chart shows the cable feature to graphics accelerator
reference. Check your specific system model to determine which graphics
accelerators are supported on which model.
Graphics Accelerators
GXT120P/
GXT130P/ GXT2000P/ GXT4000P/ GXT4500P/
GXT110P GXT135P GXT300P GXT3000P GXT6000P GXT6500P
Displays (5D/DDC)(9) (15D/DDC) (15D/DDC) (DVI/DDC) (DVI/DDC)
P70 4238 4238 4238 4238 4238(6) 4238(6)
P72(1) Display Display Display Display Display(6) Display(6)
P76(1) Display Display Display Display Display(6) Display(6)
P77(1) Display(9)Display Display Display Display(6) Display(6)
P92(7) Display Display Display Display Display(6) Display(6)
P200 4238 4238 4238 4238 4238(6) 4238(6)
P201 4237 4237 4237 4237 4237(6) 4237(6)
P202(7) Display Display Display Display Display(6) Display(6)
P260(7) Display Display Display Display Display Display
P275(7) Display(9)Display Display Display Display Display
6091-19I NS NS NS 4239(5) NS NS
POWERDP17 4217 NS 4217 4239(5) NS NS
POWERDP20 4217 NS 4217 4239(5) NS NS
9516-B03 4217 4217 4217 4217 4217(6) 4217(6)
9511-Axx Display Display NS NS NS NS
T54A/T54H/T540
9519-Axx Display Display NS Display NS Display
T85A
9493-Axx Display Display NS NS NS NS
T56A
9494-xxx Display(9)Display NS NS NS Display
T860
9497-Axx Display(9)Display Display Display NS Display(6)
T86A
6656-Hxx NS Display NS NS NS NS
T560
6658-Hxx Display(9)Display NS Display NS Display
T84H
6659-Hxx NS Display NS NS NS Display
T210
Note: NS = Not Supported - This display/adapter combination is not
supported.
Note: Display - The appropriate cable is included with the display.
Note: (1) Captured 15-pin D-shell cable
Note: (5) Feature number 4239 (3 BNC Cable) is recommended on GXT2000P
and GXT3000P. Feature number 4217 is a 5BNC cable (external in H and V
synch).
Note: (6) Must use DVI to 15-pin D-shell converter supplied with the
GXT4000P, GXT4500P, GXT6000P or GXT6500P.
Note: (7) Dual input on monitor.
Note: (8) Analog only.
Note: (9) GXT130P only.
The Model 270 requires AIX Version 4.3.3, Version 5.1, or later.
Back to top
The following publications are shipped with the Model 270. Additional
copies are available.
Order
Title Number
--------------------------------------------- ---------
44P Series Model 270 Setup Instructions SA38-0574
44P Series Model 270 User's Guide SA38-0573
RS/6000 Customer Support Information SA23-2690
(U.S. and Canadian customers only)
RS/6000 System Unit Safety Information SA23-2652
PCI Adapter Placement Reference Guide SA38-0538
Customer Installable Options Library CD-ROM(1)
Warranty Booklet (U.S. customers only)
Note: (1) The CD-ROM cannot be ordered; shipped only at manufacturing.
No form number.
Back to top
- LANGUAGES
- (#9300) - Language Group Specify - US English
- (#9703) - Language Group Specify - French
- (#9704) - Language Group Specify - German
- (#9705) - Language Group Specify - Polish
- (#9707) - Language Group Specify - Portuguese
- (#9708) - Language Group Specify - Spanish
- (#9711) - Language Group Specify - Italian
- (#9712) - Language Group Specify - Canadian French
- (#9714) - Language Group Specify - Japanese
- (#9715) - Language Group Specify - Traditional Chinese (Taiwan)
- (#9716) - Language Group Specify - Korean
- (#9719) - Language Group Specify - Hungarian
- (#9720) - Language Group Specify - Slovakian
- (#9721) - Language Group Specify - Russian
- (#9722) - Language Group Specify - Simplified Chinese (PRC)
- LINECORDS
- (#9800) - Power Cord Specify - United States/Canada
- (#9802) - Power Cord Specify - Brazil (125V, 15A)
- (#9820) - Power Cord Specify - Belgium, Finland, France (250V, 16A)
- (#9821) - Power Cord Specify - Denmark (250V, 10A)
- (#9825) - Power Cord Specify - United Kingdom (250V, 13A)
- (#9827) - Power Cord Specify - Israel (250V, 6-16A)
- (#9828) - Power Cord Specify - Switzerland (250V, 10A)
- (#9829) - Power Cord Specify - South Africa/Pakistan (250V, 16A)
- (#9830) - Power Cord Specify - Italy (250V, 10A and 16A)
- (#9831) - Power Cord Specify - Argentina (250V, 10A)
- (#9833) - Power Cord Specify - Thailand (250V, 15A)
- (#9834) - Power Cord Specify - Uruguay (250V, 10A)
- MISCELLANEOUS
- (#5001) - Customer Service Specify
- (#5005) - Software Preinstall
- (#7305) - AAP Software Pre-Install Indicator
- (#0001) - After-market (MES) Order Indicator
- (#0986) - CCS Customer Service Specify (US)
- (#1736) - Expedited Delivery Service Indicator
Special Features - Initial Orders
- MEMORY
- (#4120) - 512MB (2x256MB)Memory DIMMS
Special Features - Plant and/or Field Installable
- ADAPTERS
- (#2494) - PCI 3-Channel Ultra2 SCSI RAID Adapter
- (#2498) - PCI 4-Channel Ultra3 SCSI RAID Adapter
- (#2708) - Eicon ISDN DIVA PRO 2.0 PCI S/T Adapter
- (#2741) - SysKonnect SK-NET FDDI-LP SAS PCI
- (#2742) - SysKonnect SK-NET FDDI-LP DAS PCI
- (#2743) - SysKonnect SK-NET FDDI-UP SAS PCI
- (#2823) - POWER GXT2000P Graphics Accelerator
- (#2825) - POWER GXT3000P Graphics Accelerator
- (#2826) - POWER GXT4000P Graphics Accelerator
- (#2827) - POWER GXT6000P Graphics Accelerator
- (#2830) - POWER GXT130P Graphics Accelerator
- (#2841) - POWER GXT300P Graphics Accelerator
- (#2842) - POWER GXT4500P Graphics Accelerator
- (#2843) - POWER GXT6500P Graphics Accelerator
- (#2849) - POWER GXT135P Graphics Accelerator with Digital Support
- (#2639) - Ultimedia Video Capture Adapter/S - PCI
- (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
- (#2944) - 128-Port Asynchronous Controller, PCI bus
- (#2946) - Turboways 622 Mbps PCI MMF ATM Adapter
- (#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
- (#2962) - 2-Port Multiprotocol PCI Adapter
- (#2963) - TURBOWAYS 155 PCI UTP ATM Adapter
- (#2968) - IBM 10/100 Mbps Ethernet PCI Adapter
- (#2969) - Gigabit Ethernet - SX PCI Adapter
- (#2975) - 10/100/1000 Base-T Ethernet PCI Adapter
- (#2988) - TURBOWAYS 155 PCI MMF ATM Adapter
- (#2998) - TURBOWAYS 25 ATM PCI Adapter
- (#4951) - IBM Four Port 10/100 Ethernet Adapter
- (#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter
- (#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter
- (#4958) - PCI Cryptographic Coprocessor
- (#4959) - IBM Token-Ring PCI Adapter
- (#4960) - IBM e-business Cryptographic Accelerator
- (#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter
- (#4962) - 10/100 Mbps Ethernet PCI Adapter II
- (#4963) - PCI Cryptographic Coprocessor (FIPS-4)
- (#4964) - PCI Cryptographic Coprocessor
- (#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter
- (#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
- (#6203) - PCI Dual Channel Ultra3 SCSI Adapter
- (#6204) - PCI Universal Differential Ultra SCSI Adapter
- (#6205) - PCI Dual Channel Ultra2 SCSI Adapter
- (#6206) - PCI Single-Ended Ultra SCSI Adapter
- (#6227) - Gigabit Fibre Channel Adapter for PCI Bus
- (#6228) - Gigabit Fibre Channel Adapter for 64-bit PCI Bus
- (#6230) - Advanced SerialRAID Plus Adapter
- (#6231) - 128 MByte DRAM Option Card
- (#6235) - 32 MByte Fast-Write Cache Option Card
- (#6239) - 2 Gigabit Fibre Channel PCI-X Adapter
- (#6310) - IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
- (#6311) - IBM ARTIC960RxF PCI Adapter for RS/6000
- CABLES
- (#2456) - LC-SC 50 Micron Fibre Converter Cable
- (#2459) - LC-SC 62.5-Micron Fiber Converter Cable
- (#2934) - Asynchronous Terminal/Printer Cable EIA-232
- (#2936) - Asynchronous Cable EIA-232/V.24
- (#2945) - Asynchronous Terminal Cable - EIA-422A
- (#3925) - Serial Port Converter Cable, 9-Pin to 25-Pin
- (#3926) - Async Printer/Terminal Cable, 9-pin to 25-pin, 4m
- (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter
- (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
- (#8133) - RJ-45 to DB-25 Converter Cable
- (#8135) - 64-Port to 128-Port Pin-Out Converter
- (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232
- (#8138) - Enhanced Remote Asynchronous Node 16-Port RS-422
- (#2111) - PCI SCSI Adapter To 2-Port, 8-Bit SE External Device Cable
- (#2112) - PCI SCSI Adapter To 2-Port, 8-Bit Differential Ext Device
Cable
- (#2113) - PCI SCSI Adapter To Single Port 8-Bit SE External Device
Cable
- (#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable
- (#2115) - PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable
- (#2116) - PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device
Cable
- (#2117) - PCI SCSI Adapter 16-bit SE External Y Cable
- (#2118) - Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
- (#2424) - 0.6M 16-bit SCSI-2 System to System Cable
- (#2425) - 2.5M 16-bit SCSI-2 System to System Cable
- (#4217) - 6091 Attachment Cable
- (#4237) - 13W3 to 15-pin DDC/ID Bits Switchable Display Cable
- (#4238) - DDC 15 Pin to 13W3 Display Cable
- (#4239) - 15-D Adapter to 3BNC ID Cable
- (#4242) - 6 Foot Extender Cable for Displays (15 pin D-shell to 15
pin D-shell)
- (#4223) - Ethernet 10Base2 Transceiver
- (#4224) - Ethernet 10BaseT Transceiver
- (#2709) - ARTIC960Hx 4-Port T1 RJ48 Cable
- (#2710) - ARTIC960Hx 4-Port E1 RJ48 Cable
- (#2861) - ARTIC960Hx 4-Port EIA-232 Cable
- (#2862) - ARTIC960Hx 4-Port RS-449 Cable
- (#2863) - ARTIC960Hx 4-Port X.21 Cable
- (#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable
- (#2865) - ARTIC960Hx 4-Port EIA-530 Cable
- (#2871) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
- (#2872) - IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
- (#2873) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port
Cable
- (#2874) - IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M
Extension Cable
- (#2875) - IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded,
1.8M 4-Port Cable
- (#2876) - IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Ungrounded,
1.8M 4-Port Cable
- (#2951) - Cable, V.24 / EIA-232
- (#2952) - Cable, V.35
- (#2953) - Cable, V.36 / EIA-499
- (#2954) - Cable, X.21
- (#2877) - IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
- (#2878) - IBM ARTIC960RxD Quad DTA, SC Bus, 5-Drop Cable
- (#2879) - IBM ARTIC960RxD Quad DTA, Four H.100 to SC bus Converter
Cable
- (#3124) - Serial to Serial Port Cable for Drawer/Drawer
- (#3125) - Serial to Serial Port Cable for Rack/Rack
- DISKS
- (#2906) - 9.1GB 10,000 RPM Ultra-SCSI 16-bit Enhanced Disk Drive
- (#2908) - 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive
- (#2909) - 18.2 GB Ultra-SCSI 1" High (25mm) Disk Drive
- (#3027) - 9.1GB 10,000 RPM Ultra-SCSI Disk Drive
- (#3029) - 9.1GB Ultra-SCSI 16-bit Enhanced Disk Drive
- (#3102) - 18.2 GB 10,000 RPM Ultra SCSI Disk Drive
- (#3103) - 18.2GB Ultra-SCSI Enhanced Disk Drive
- (#3110) - 18.2GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
- (#3118) - 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive
- (#3119) - 36.4GB 10,000 RPM Ultra SCSI Disk Drive
- (#3128) - 36.4GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
- (#3163) - 73.4 GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
- (#6505) - Carrier for Ultra-SCSI 16-bit Disk
- (#6508) - Media Bay Disk Drive Mounting Kit
- DISPLAYS
- (#3627) - IBM P76/P77 Color Monitor, Business Black, Captured Cable
- (#3628) - IBM P260/P275 Color Monitor, Business Black, and Cable
- (#3629) - IBM P76/P77 Color Monitor, Pearl White, Captured Cable
- (#3630) - IBM P260/P275 Color Monitor, Pearl White, and Cable
- (#3635) - T210 Flat-Panel Monitor
- (#3636) - L200P Flat Panel Monitor
- (#3637) - IBM T541H/L150p 15" TFT Color Monitors, Business Black,
Captured Cable
- (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
- (#3639) - IBM ThinkVision L170p Flat Panel Monitor
- (#3640) - IBM ThinkVision L171p Flat Panel Monitor
- (#3642) - ThinkVision L191p Flat Panel Monitor
- KEYBOARDS
- (#6600) - Quiet Touch Keyboard, US English, #103P
- (#6601) - Quiet Touch Keyboard, French, #189
- (#6602) - Quiet Touch Keyboard, Italian, #142
- (#6603) - Quiet Touch Keyboard, German/Austrian, #129
- (#6604) - Quiet Touch Keyboard, UK English, #166
- (#6605) - Quiet Touch Keyboard, Spanish, #172
- (#6606) - Quiet Touch Keyboard, Japanese, #194
- (#6609) - Quiet Touch Keyboard, Belgian/French, #120
- (#6610) - Quiet Touch Keyboard, Belgian/UK-Flemish, #120
- (#6611) - Quiet Touch Keyboard, Swedish/Finnish, #153
- (#6612) - Quiet Touch Keyboard, Danish, #159
- (#6614) - Quiet Touch Keyboard, Swiss,French/German, #150f/g
- (#6616) - Quiet Touch Keyboard, Norwegian, #155
- (#6619) - Quiet Touch Keyboard, Greek, #319
- (#6620) - Quiet Touch Keyboard, Hebrew, #212
- (#6629) - Quiet Touch Keyboard, LA Spanish, #171
- (#6630) - Quiet Touch Keyboard, Arabic, #238
- (#6633) - Quiet Touch Keyboard, Korean, #413
- (#6634) - Quiet Touch Keyboard, Chinese/US, #467
- (#6638) - Quiet Touch Keyboard, Russian, #443
- (#6640) - Quiet Touch Keyboard, US English ISO9995, #103P
- (#8700) - Quiet Touch Keyboard - Business Black, US English, #103P
- (#8701) - Quiet Touch Keyboard - Business Black, French, #189
- (#8702) - Quiet Touch Keyboard - Business Black, Italian, #142
- (#8703) - Quiet Touch Keyboard - Business Black, German/Austrian,
#129
- (#8704) - Quiet Touch Keyboard - Business Black, UK English, #166
- (#8705) - Quiet Touch Keyboard - Business Black, Spanish, #172
- (#8706) - Quiet Touch Keyboard - Business Black, Japanese, #194
- (#8707) - Quiet Touch Keyboard - Business Black, Brazilian
Portuguese, #275
- (#8708) - Quiet Touch Keyboard - Business Black, Canadian French,
#058
- (#8709) - Quiet Touch Keyboard - Business Black, Belgian/French, #120
- (#8710) - Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish,
#120
- (#8711) - Quiet Touch Keyboard - Business Black, Swedish/Finnish,
#153
- (#8712) - Quiet Touch Keyboard - Business Black, Danish, #159
- (#8713) - Quiet Touch Keyboard - Business Black, Bulgarian, #442
- (#8714) - Quiet Touch Keyboard - Business Black, Swiss,French/German,
#150f/g
- (#8716) - Quiet Touch Keyboard - Business Black, Norwegian, #155
- (#8717) - Quiet Touch Keyboard - Business Black, Dutch, #143
- (#8718) - Quiet Touch Keyboard - Business Black, Portuguese, #163
- (#8719) - Quiet Touch Keyboard - Business Black, Greek, #319
- (#8720) - Quiet Touch Keyboard - Business Black, Hebrew, #212
- (#8721) - Quiet Touch Keyboard - Business Black, Hungarian, #208
- (#8722) - Quiet Touch Keyboard - Business Black, Icelandic, #197
- (#8723) - Quiet Touch Keyboard - Business Black, Polish, #214
- (#8724) - Quiet Touch Keyboard - Business Black, Romanian, #446
- (#8725) - Quiet Touch Keyboard - Business Black, Slovakian, #245
- (#8726) - Quiet Touch Keyboard - Business Black, Czech, #243
- (#8727) - Quiet Touch Keyboard - Business Black, Turkish, #179
- (#8728) - Quiet Touch Keyboard - Business Black, Turkish, #440
- (#8729) - Quiet Touch Keyboard - Business Black, LA Spanish, #171
- (#8730) - Quiet Touch Keyboard - Business Black, Arabic, #238
- (#8732) - Quiet Touch Keyboard - Business Black, Serbian-Cyrillic,
#118
- (#8733) - Quiet Touch Keyboard - Business Black, Korean, #413
- (#8734) - Quiet Touch Keyboard - Business Black, Chinese/US, #467
- (#8735) - Quiet Touch Keyboard - Business Black, French Canadian,
#445
- (#8736) - Quiet Touch Keyboard - Business Black, Thailand, #191
- (#8738) - Quiet Touch Keyboard - Business Black, Russian, #443
- (#8739) - Quiet Touch Keyboard - Business Black, Croatian, #105
- (#8740) - Quiet Touch Keyboard - Business Black, US English ISO9995,
#103P
- MEMORY
- (#4098) - Memory Expansion Feature (16 POS)
- (#4110) - 256MB(2X128MB) DIMMS, 200 pin 10NS SDRAM
- (#4119) - 512MB (2X256MB) DIMMs, 200-pin 10NS SDRAM
- (#4121) - 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM
- MEDIA DEVICES
- (#2623) - 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
- (#2624) - 32X (Max) SCSI-2 CD-ROM Drive
- (#2627) - 4.7 GB SCSI-2 DVD-RAM Drive (White Bezel)
- (#6120) - IBM 80/160 GB Internal Tape Drive with VXA Technology
- (#6134) - 60/150 GB 16-bit 8mm Internal Tape Drive
- (#6154) - 20/40GB 16-bit 8mm Internal Tape Drive (White Bezel)
- (#6156) - 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)
- (#6158) - 20/40GB 4mm Internal Tape Drive
- (#6159) - 12/24GB 4mm Internal Tape Drive
- MISCELLANEOUS
- (#3752) - Service Package
- (#3753) - Options Library (hard copy)
- (#6041) - 3-Button Mouse
- (#8422) - Spaceball 3D Input Device
- (#8423) - Magellan XT 3D Input Device
- (#8741) - 3-Button Mouse - Business Black
- PROCESSORS
- (#4361) - 1-way 375 MHz POWER3-II Processor Card
- (#4362) - 2-way 375 MHz POWER3-II Processor Card
- (#4365) - 2-WAY 375MHz POWER3-II Processor Card (8MB L2/Processor)
- (#4366) - 2-WAY 450MHz POWER3-II Processor Card (8MB L2/Processor)
- SPECIFY CODES
- (#9004) - Southern Hemisphere Designator for Monitors
Feature Descriptions
The following is a list of all feature codes in numeric order for the
IBM RS/6000 7044 machine type.
Attributes, as defined in the following feature descriptions, state
the interaction of requirements among features.
Minimums and maximums are the absolute limits for a single feature
without regard to interaction with other features. The maximum valid
quantity for MES orders may be different than for initial orders. The
maximums listed below refer to the largest quantity of these two
possibilities.
The order type defines if a feature is orderable only on initial
orders, only on MES orders, on both initial and MES orders, or if a
feature is supported on a model due to a model conversion. Supported
features cannot be ordered on the converted model, only left on or
removed from the converted model.
(#0001) After-market (MES) Order Indicator
(No Longer Available as of March 21, 2008)
This feature may be used in orders for features ordered by MES. This
feature prevents configuration checking. It does not have to be repeated
for subsequent MES orders for the same machine.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#0001)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#0986) CCS Customer Service Specify (US)
This feature code specifies that the system will receive special
request services from the Center for Customized Solutions (CCS).
FC 0986 is available only on the initial plant order.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#0986)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#1736) Expedited Delivery Service Indicator:
(No Longer Available as of June 25, 2004)
This feature number specifies that a system will be shipped to the
customer with expedited 2 day delivery.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#1736)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#2111) PCI SCSI Adapter To 2-Port, 8-Bit SE External Device Cable
(No Longer Available as of December 3, 2001)
- Attributes provided: Attachment of external 2-port, 8-bit devices to
the PCI SCSI-2 Fast/Wide adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7044-270: (#2111)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2112) PCI SCSI Adapter To 2-Port, 8-Bit Differential Ext Device Cable
(No Longer Available as of December 3, 2001)
- Attributes provided: Attachment of external 2-port, 8-bit
differential devices to the PCI SCSI-2 differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7044-270: (#2112)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2113) PCI SCSI Adapter To Single Port 8-Bit SE External Device Cable
(No Longer Available as of December 3, 2001)
- Attributes provided: Attachment of external single-port, 8-bit SE
devices to the PCI SCSI-2 Fast/Wide adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7044-270: (#2113)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable
(No Longer Available as of June 23, 2006)
- Attributes provided: Attachment of multiple hosts to the PCI SCSI-2
differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7044-270: (#2114)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2115) PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable
(No Longer Available as of April 26, 2002)
- Attributes provided: Attachment of external 2-port 16-bit SE devices
to the PCI SCSI-2 Fast/Wide adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7044-270: (#2115)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2116) PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device Cable
(No Longer Available as of April 26, 2002)
- Attributes provided: Attachment of external 2-port 16-bit
differential devices to the PCI SCSI-2 differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7044-270: (#2116)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2117) PCI SCSI Adapter 16-bit SE External Y Cable
(No Longer Available as of December 3, 2001)
- Attributes provided: Attachment of multiple hosts to the PCI SCSI-2
Fast/Wide adapter
- Attributes required: 1 External SCSI-2 Port
- For 7044-270: (#2117)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2118) Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
(No Longer Available as of June 23, 2006)
0.3M 16-bit SCSI cable used to convert from a Mini-68 pin VHDCI
connector to a 68 pin P style connector. Cable has male Mini-68 pin
VHDCI connector on one end and a female 68 pin P style connector on the
other. Length = 0.3 meters.
- Attributes provided: Attachment of supported external sub-system to
integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector.
- Attributes required: None
- For 7044-270: (#2118)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2424) 0.6M 16-bit SCSI-2 System to System Cable
(No Longer Available as of December 10, 2004)
This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
- Attributes provided: 0.6 meter SCSI cable with 68-pin connectors at
each end
- Attributes required: 68-pin SCSI Interface
- For 7044-270: (#2424)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2425) 2.5M 16-bit SCSI-2 System to System Cable
(No Longer Available as of June 23, 2006)
This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
- Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at
each end
- Attributes required: 68-pin SCSI Interface
- For 7044-270: (#2425)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2456) LC-SC 50 Micron Fibre Converter Cable
50 micron fiber cable used to convert from LC type to SC type
connectors. Cable has male LC type connector on one end and a female SC
type connector on the other. Length = 2 meters.
- Attributes provided: Attachment to external 50 micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.
- Attributes required: None
- For 7044-270: (#2456)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: AIX 4.3.3 with 4330-08 Recommended Maintenance
Package or later, AIX 5.1 or later.
- Initial Order/MES/Both/Supported: Both
(#2459) LC-SC 62.5-Micron Fiber Converter Cable
62.5-micron fiber cable used to convert from LC type to SC type
connectors. Cable has male LC type connector on one end and a female SC
type connector on the other. Length = 2 meters.
- Attributes provided: Attachment to external 62.5-micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.
- Attributes required: None
- For 7044-270: (#2459)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: No Max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2494) PCI 3-Channel Ultra2 SCSI RAID Adapter
(No Longer Available as of December 1, 2000)
The RS/6000 PCI 3-Channel Ultra2 SCSI RAID Adapter(#2494) is a non-
bootable high performance Ultra2 SCSI RAID Adapter providing RAID 0,1,or
5 capability and can address up to forty-five 16-bit SCSI-2 physical disk
drives on three independent SCSI buses.
To increase the data writing performance, a 32 MByte fast-write cache
is provided as a resident part of this adapter. The 32 MByte fast-write
cache is a resident feature of the IBM PCI 3-Channel Ultra2 SCSI RAID
Adapter that utilizes non-volatile RAM. During the unlikely event of an
PCI 3-Channel Ultra2 SCSI RAID Adapter failure, a replacement PCI
3-Channel Ultra2 SCSI RAID Adapter can be installed and the fast-write
cache can be removed from the failing adapter and installed in the new
adapter insuring data integrity. The 32 MByte fast-write cache can
provide an significant improvement in data throughput and response time
during certain sequence write operations compared to SCSI RAID adapters
without the fast-write cache. The response time and data transfer
improvement will vary depending upon the data block sizes, the percentage
of sequential writes, machine type/model, and application parameters.
The PCI 3-Channel Ultra2 SCSI RAID Adapter has one internal and two
external independent Ultra2 SCSI buses. The internal port can be used to
provide an internal RAID solution on supporting RS/6000 systems. Systems
with internal 6-pack disks can attach one PCI 3-Channel Ultra2 SCSI RAID
adapter per internal 6-pack.The two external ports provide connectivity
to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable
Storage Plus Tower at up to 80 MB/s SCSI bus data rate. The two external
ports can also connect to the IBM 7131-105 external Fast/Wide SCSI disk
enclosure via an optional VHDCI to P Converter Cable (#2118). Note:
Even though the PCI 3-Channel Ultra2 SCSI RAID Adapter has ports that run
at Ultra2 SCSI speeds (up to 80 MBytes/s), the internally attached disk
drives will run at a maximum SCSI bus data rate specified by that
supporting system backplane. Also, the externally attached 7131-105 will
only run at a maximum of Fast/Wide SCSI speeds (up to 20 MBytes/s).
In order for full support and to take full advantage of the Ultra2 (up
to 80 MBytes/s) speed of this adapter, the proper AIX level also needs to
be considered. AIX 4.2.1 with appropriate APAR updates and 4.3.3 or
later supports the full range of SCSI bus data rates (including Ultra2
SCSI up to 80 MByte/s). AIX 4.3.2 only supports data rates up to 40
MByte/s. Check the AIX level your system has or is able to support.
Appropriate AIX APAR needed are as follows:
- AIX 4.2.1 with APAR IX86638, IX86654, IX87183, IY01945, & IY02373
- AIX 4.3.2 with APAR IX86395, & IX86396
- AIX 4.3.3 or later
Upgrading an existing PCI 3-Channel Ultra SCSI RAID Adapter (#2494) to
the later version PCI 3-Channel Ultra2 SCSI RAID Adapter is also
available after September 24, 1999. To upgrade to the Ultra2 version (up
to 80 MBytes/s capability), a new level of microcode needs to be
downloaded. To obtain this later level of microcode (3.12.00 or higher),
go to the below web address and follow the microcode download procedure.
AIX levels with appropriate APAR updates described above also apply in
conjunction with the microcode upgrade.
- http://www.rs6000.ibm.com/support/micro/download.html
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One PCI bus slot
- For 7044-270: (#2494)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2498) PCI 4-Channel Ultra3 SCSI RAID Adapter
(No Longer Available as of December 10, 2004)
The RS/6000 PCI 4-Channel Ultra3 SCSI RAID Adapter(#2498) is a non-
bootable high performance Ultra3 SCSI RAID Adapter providing RAID 0,1,1E,
5, 5E capability and can address up to sixty 16-bit SCSI physical disk
drives on four independent SCSI buses.
To increase the data writing performance, a 128 MByte fast-write cache
is provided as a resident part of this adapter. The 128 MByte fast-write
cache is a resident feature of the PCI 4-Channel Ultra3 SCSI RAID Adapter
that utilizes non-volatile RAM. During the unlikely event of an PCI
4-Channel Ultra3 SCSI
RAID Adapter failure, a replacement PCI 4-Channel Ultra3 SCSI RAID
Adapter can be installed and the fast-write cache can be removed from the
failing adapter and installed in the new adapter insuring data integrity.
The 128 MByte fast-write cache can provide an significant improvement in
data throughput and response time during certain sequence write
operations compared to SCSI
RAID adapters without the fast-write cache. The response time and
data transfer improvement will vary depending upon the data block sizes,
the percentage of sequential writes, machine type/model, and application
parameters.
The PCI 4-Channel Ultra3 SCSI RAID Adapter has four independent Ultra3
SCSI buses. There are two internal ports and four external ports. The
two internal ports are shared with two of the external ports. Two of the
four busses can drive either an internal port or an external port. The
other two busses only drive external ports. The internal ports can be
used to provide an internal RAID solution on supporting RS/6000 systems.
Systems with one or two internal 6-pack disks can attach to a PCI
4-Channel Ultra3 SCSI RAID Adapter. The four external ports provide
connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate. The four external ports also provide connectivity to an IBM
2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage
Plus Tower at up to 80 MB/s SCSI bus data rate.
Limitations:
- The four external ports do not support the connection to the IBM
7131-105 external Fast/Wide SCSI disk enclosure.
- Even though the PCI 4-Channel Ultra3 SCSI RAID Adapter has ports that
run at Ultra3 SCSI speeds (up to 160 MBytes/s) and Ultra2 SCSI speeds (up
to 80MBytes/s), the internally attached disk drives will run at a maximum
SCSI bus data rate specified by that supporting system backplane.
In order for full support and to take full advantage of the Ultra3 (up
to 160 MBytes/s) speed of this adapter, the proper AIX level also needs
to be considered. AIX 4.3.3 with appropriate APAR updates or later AIX
versions support the full range of SCSI bus data rates (including Ultra3
SCSI up to 160 MByte/s). Check the AIX level your system has or is able
to support.
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One PCI bus slot
- For 7044-270: (#2498)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3 with 4330-05 Recommended Maintenance
Package.
- Initial Order/MES/Both/Supported: Both
(#2623) 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)
(No Longer Available as of September 24, 2004)
The SCSI-2 DVD-RAM drive is a multifunction storage device capable of
reading and writing 4.7GB DVD-RAM discs and reading CD-ROM discs. This
device also provides read/write compatibility with conventional 2.6GB
DVD-RAM discs. System boot and install functions are supported with
CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer
diameter, 1350KB/sec write (1X DVD) and 2705KB/sec read (2X DVD)
- Interface: SCSI-2 supporting synchronous and asynchronous data
transfer
- Average Random Access Time: 100ms CD-ROM, 155ms DVD-RAM
- High-speed synchronous burst rate of 10MB/second
- Loading tray accommodates both 8cm discs (in horizontal orientation
only), 12cm discs (CD-ROM) and 4.7GB DVD cartridges
- Operates in either vertical or horizontal position
- Reads multi-session discs
- Reads CD-recordable discs
- Reads CD-RW discs
- Reads and writes 2.6GB, 4.7GB and 9.4GB (double sided) DVD-RAM media
- Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA
and audio
- Contains headphone output and line output for audio
Limitations:
- DVD video is not supported.
- Attributes provided: 4.7GB 2X DVD (2705 KB/Sec) DVD-RAM
- Attributes required: 1 half high media bay and one SCSI address
- For 7044-270: (#2623)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 with 4330-08 Recommended Maintenance
Package or later, AIX 5.1 or later.
- Initial Order/MES/Both/Supported: Both
(#2624) 32X (Max) SCSI-2 CD-ROM Drive
(No Longer Available as of July 29, 2005)
The 32X (Max) SCSI-2 Internal CD-ROM Drive is a tray loading CD-ROM
drive providing up to 4800KB/sec maximum media data transfer rate. It is
a 5.25 inch half-high form factor, single ended, 8 bit, multi-session
capable, CD-ROM drive which provides state of the art performance and
supports existing 600MB CD-ROM discs.
Characteristics:
- Media Data Transfer Rate: 4800 KB/sec (Max)
- Interface: SCSI-2 8 bit Single Ended (SE)
- Avg. Random Access Time: 90ms (typical)
- Buffer Memory: 512KB
- Media capacity: Greater than 600MB
- Multisession capable (Reads CDR & CDRW media)
- 5.25-inch half-high form factor
- Operates in either vertical or horizontal positions
- Interface supports standard and extended XA formats
- Loading tray supports 12cm and 8cm disks
- Attributes provided: 600MB 32X (max)(up to 4800KB/sec) CDROM
- Attributes required: 1 half high media bay and 1 SCSI-2 internal SE
8-bit address
- For 7044-270: (#2624)
- Minimum required: 1
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2627) 4.7 GB SCSI-2 DVD-RAM Drive (White Bezel)
(No Longer Available as of December 27, 2002)
The SCSI-2 DVD-RAM drive is a multifunction storage device capable of
reading and writing 4.7GB DVD-RAM discs and reading CD-ROM discs. This
device also provides read/write compatibility with conventional 2.6GB
DVD-RAM discs. System boot and install functions are supported with
CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer diam
eter, 1350KB/sec write (1X DVD) and 2705KB/sec read (2X DVD)
- Interface: SCSI-2 supporting synchronous and asynchronous data
transfer
- Average Random Access Time: 100ms CD-ROM, 155ms DVD-RAM
- High-speed synchronous burst rate of 10MB/second
- Loading tray accommodates both 8cm discs (in horizontal orientation
only), 12cm discs (CD-ROM) and 4.7GB DVD cartridges
- Operates in either vertical or horizontal position
- Reads multi-session discs
- Reads CD-recordable discs
- Reads CD-RW discs
- Reads and writes 2.6GB, 4.7GB and 9.4GB (double sided) DVD-RAM media
- Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA
and audio
- Contains headphone output and line output for audio
Limitations:
- DVD video is not supported.
- Attributes provided: 4.7GB 2X DVD (2705 KB/Sec) DVD-RAM
- Attributes required: 1 half high media bay and one SCSI address
- For 7044-270: (#2627)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 with 4330-08 Recommended Maintenance
Package or later, AIX 5.1 or later.
- Initial Order/MES/Both/Supported: Both
(#2639) Ultimedia Video Capture Adapter/S - PCI
(No Longer Available as of December 1, 2000)
The Ultimedia Video Capture Adapter/S is a PCI-based adapter that
allows the capture of live video and still images. This adapter, coupled
with Ultimedia Services and the appropriate optional hardware, can be
used for entry-level video conferencing, image capture, and video
monitoring.
- Attributes provided: Video capture and monitoring
- Attributes required: One PCI slot
- For 7044-270: (#2639)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2708) Eicon ISDN DIVA PRO 2.0 PCI S/T Adapter
(No Longer Available as of October 17, 2001)
Connects PCI RS/6000 systems to worldwide ISDN networks. The adapter
comes from Eicon Technology, the world leader in ISDN technology, as a
fully supported IBM feature. #2708 provides basic rate 2B + D with 64
Kbps on each B channel. TCP/IP applications are supported.
Note: AIX drivers are shipped on diskette with the hardware feature.
Systems ordered with AIX preinstalled will have the device drivers
installed on the hard disk drive.
Country approvals for ISDN network attachment: Austria, Belgium,
Canada, Denmark, Finland, France, Germany, Greece, Iceland, Ireland,
Italy, Luxembourg, Norway, Portugal, Spain, Sweden, Switzerland, United
Kingdom, United States
Provides S/T interface, requires connection to NT-1 (Network
Terminator-1) from the phone line provider.
Limitation: This adapter is not supported by AIX 5.1 (32 bit or 64
bit kernel).
- Attributes provided: One ISDN BRI connection
- Attributes required: One PCI slot
- For 7044-270: (#2708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2709) ARTIC960Hx 4-Port T1 RJ48 Cable
(No Longer Available as of June 25, 2004)
4-Port T1 RJ48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or
ARTIC960RxD Quad Digital Trunk adapter.
(#2710) ARTIC960Hx 4-Port E1 RJ48 Cable
(No Longer Available as of June 25, 2004)
4-Port T1 RJ48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or
ARTIC960RxD Quad Digital Trunk adapter.
(#2741) SysKonnect SK-NET FDDI-LP SAS PCI
(No Longer Available as of May 18, 2003)
- Fiber optical FDDI Single Attach Station
This adapter provides single attachment to a FDDI concentrator (or
point-to-point) using fiber optic cabling (not supplied with the
adapter).
It also offers high speed, low latency, and low CPU and bus
utilization and occupies a single PCI bus slot.
Features:
- Occupy single PCI bus slot
- Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard
Series
- SMT 7.3 compliance
- AMD SUPERNET3 single chip FDDI design
- SysKonnect designed custom ASIC with for buffer management with
minimal CPU and bus load
- Four independent 128-byte FIFOs for buffering between PCI bus and
buffer memory
- 128KB static RAM on board
- Support under AIX SMIT and diagnostic routines
- Supports Remote IPL and NIM with the appropriate system firmware.
See Limitations section.
Connection requirements:
- Connect to fiber FDDI concentrator ports using fiber optic cable with
an FDDI SC (low cost fiber) connector
Limitation:
- A configuration using more than one SysKonnect FDDI adapter (feature
2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect
SK-NET FDDI-UP SAS PCI), constitutes a Class A system.
- NIM is supported on this system using FDDI on AIX 4.2.1 and later.
Note: FDDI Remote IPL, systems shipped after April 24, 1998, will have
the appropriate firmware factory installed. Systems shipped prior to
April 24, 1998, require an upgrade of system firmware to support the
Remote IPL function for FDDI adapters. If you find you have problems
with FDDI Remote IPL, make sure you obtain the latest system firmware.
Instructions on how to obtain this firmware can be obtained by calling
IBM Service and asking for Retain Tip H162841 or by reviewing and
downloading from the RS/6000 Support microcode web page located at
http://www.austin.ibm.com/support/micro/
Note: AIX Device Driver diskette is shipped with the adapter.
Limitation: AIX 5.1 or later support for this adapter is limited to
the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support
this adapter.)
- Attributes provided: One Single Attach Station Fiber FDDI port
- Attributes required: One PCI Slot
- For 7044-270: (#2741)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2742) SysKonnect SK-NET FDDI-LP DAS PCI
(No Longer Available as of May 18, 2003)
- Fiber optical FDDI Dual Attach Station
This adapter provides either dual attachment to the main ring path or
dual homing to one or two FDDI concentrators using fiber optic cabling
(not supplied with the adapter).
It also offers high speed, low latency, and low CPU and bus
utilization and occupies a single PCI bus slot.
Features:
- Occupy single PCI bus slot
- Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard
Series
- SMT 7.3 compliance
- AMD SUPERNET3 single chip FDDI design
- SysKonnect designed custom ASIC with for buffer management with
minimal CPU and bus load
- Four independent 128-byte FIFOs for buffering between PCI bus and
buffer memory
- 128KB static RAM on board
- Support under AIX SMIT and diagnostic routines
- Supports Remote IPL and NIM with the appropriate system firmware.
See Limitations section.
Connection requirements:
- Connect to fiber FDDI concentrator ports using fiber optic cable with
an FDDI SC (low cost fiber) connector
Limitation:
- A configuration using more than one SysKonnect FDDI adapter (feature
2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect
SK-NET FDDI-UP SAS PCI), constitutes a Class A system.
- NIM is supported on this system using FDDI on AIX 4.2.1 and later.
Note: FDDI Remote IPL, systems shipped after April 24, 1998, will have
the appropriate firmware factory installed. Systems shipped prior to
April 24, 1998, require an upgrade of system firmware to support the
Remote IPL function for FDDI adapters. If you find you have problems
with FDDI Remote IPL, make sure you obtain the latest system firmware.
Instructions on how to obtain this firmware can be obtained by calling
IBM Service and asking for Retain Tip H162841 or by reviewing and
downloading from the RS/6000 Support microcode web page located at
http://www.austin.ibm.com/support/micro/
Note: AIX Device Driver diskette is shipped with the adapter.
Limitation: AIX 5.1 or later support for this adapter is limited to
the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support
this adapter.)
- Attributes provided: One Dual Attach Station Fiber FDDI port
- Attributes required: One PCI Slot
- For 7044-270: (#2742)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2743) SysKonnect SK-NET FDDI-UP SAS PCI
(No Longer Available as of July 31, 2001)
- Copper FDDI Single Attach Station
This adapter provides single attachment to a FDDI concentrator (or
point-to-point) using Category-5 unshielded twisted pair (UTP) cabling
(not supplied with the adapter).
It also offers high speed, low latency, and low CPU and bus
utilization and occupies a single PCI bus slot.
Features:
- Occupy single PCI bus slot
- Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard
Series
- SMT 7.3 compliance
- AMD SUPERNET3 single chip FDDI design
- SysKonnect designed custom ASIC with for buffer management with
minimal CPU and bus load
- Four independent 128-byte FIFOs for buffering between PCI bus and
buffer memory
- 128KB static RAM on board
- Support under AIX SMIT and diagnostic routines
- Supports Remote IPL and NIM with the appropriate system firmware.
See Limitations section.
Connection requirements:
- Connect to Category-5 unshielded twisted pair FDDI concentrator ports
using shielded RJ45 connector
Limitation:
- A configuration using more than one SysKonnect FDDI adapter (feature
2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect
SK-NET FDDI-UP SAS PCI), constitutes a Class A system.
- NIM is supported on this system using FDDI on AIX 4.2.1 and later.
Note: FDDI Remote IPL, systems shipped after April 24, 1998, will have
the appropriate firmware factory installed. Systems shipped prior to
April 24, 1998, require an upgrade of system firmware to support the
Remote IPL function for FDDI adapters. If you find you have problems
with FDDI Remote IPL, make sure you obtain the latest system firmware.
Instructions on how to obtain this firmware can be obtained by calling
IBM Service and asking for Retain Tip H162841 or by reviewing and
downloading from the RS/6000 Support microcode web page located at
http://www.austin.ibm.com/support/micro/
Note: AIX Device Driver diskette is shipped with the adapter.
Limitation: AIX 5.1 or later support for this adapter is limited to
the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support
this adapter.)
- Attributes provided: One Single Attach Station CDDI (copper) port
- Attributes required: One PCI Slot
- For 7044-270: (#2743)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2823) POWER GXT2000P Graphics Accelerator
(No Longer Available as of April 26, 2002)
The POWER GXT2000P Graphics Accelerator is a short PCI adapter card
that attaches to one slot. It supports display resolutions up to 1920 x
1200 maximum resolution up to 76 Hz, including monitors that comply with
the ISO 9241 Part 3 and Part 8 standard, and allows up to 16.7 million
simultaneous colors. For the OpenGL and graPHIGS APIs, the GXT2000P
offers support for 8-bit and 24-bit double-buffered color.
Characteristics of the IBM POWER GXT2000P Graphics Accelerator are:
- 1920 x 1200 maximum resolution up to 76 Hz
- Maximum refresh rate for 1600x1200 and smaller displays is 85 Hz
- 8-bit and 24-bit double-buffered color
- 24-bit Z-buffer
- 8-bit overlay buffer
- 4-bit window ID buffer
- 4-bit stencil buffer
- Four 256-entry hardware color tables
- Separate gamma correction table
- Face culling support
- OpenGL polygon offset support
- OpenGL polygon mode support
- 16 MB texture memory
- Trilinear texture mapping
- Video support
- Point sampling and bilinear scaling
- Color space conversion
- Attributes provided: Graphics capability
- For 7044-270: (#2823)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2825) POWER GXT3000P Graphics Accelerator
(No Longer Available as of April 26, 2002)
The POWER GXT3000P Graphics Accelerator is a single PCI adapter card
that attaches to one slot but covers the slot adjacent to it. It
supports display resolutions up to 1280 x 1024, including monitors that
comply with the ISO 9241 Part 3 standard, and allows up to 16.7 million
simultaneous colors. For the OpenGL and graPHIGS APIs, the GXT3000P
offers support for 8-bit and 24-bit double-buffered color.
The GXT3000P provides hardware acceleration for the new OpenGL 1.2
version of the API. Featured hardware enhancements over the POWER
GXT800P include:
- OpenGL and graPHIGS lighting mode
- 3D texture mapping
- Stereo in a window
- Video scaling
Characteristics of the IBM POWER GXT3000P Graphics Accelerator are:
- 1280 x 1024 maximum resolution up to 85 Hz
- 8-bit and 24-bit double-buffered color
- 24-bit Z-buffer
- 8-bit overlay buffer
- 8-bit window ID buffer
- 8-bit stencil buffer
- 8-bit double-buffered alpha
- 32 MB texture memory
- Eight 256-entry hardware color tables
- Separate gamma correction table
- Hardware accelerated lighting
- Increased subpixel addressing over previously supported adapters
- Face culling support
- OpenGL polygon offset support
- OpenGL polygon mode support
- OpenGL specular lighting support in hardware
- Trilinear Texture Mapping
- 3D texture mapping
- Video support
- Point sampling and bilinear scaling
- Color space conversion
- Stereo support
- 12-bit RGB on a per window basis
- 1024 x 768 at 120 Hz
- Preserved aspect ratio
- Attributes provided: Graphics capability
- For 7044-270: (#2825)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2826) POWER GXT4000P Graphics Accelerator
(No Longer Available as of December 6, 2002)
IBM POWER GXT4000P -- Entry, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Performance improvements over previous IBM graphics products
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
The GXT4000P Graphics Accelerator is a 64-bit entry 3D PCI Graphics
adapter for the RS/6000 Models 7044-170 and 7044-270 and 7043-270
upgrade. The graphics subsystems, matched to the POWER 3 II-based
workstations provide excellent functionality and performance for
demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for
automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer
- 24 Bit Double Buffered up to 1920 x 1200
- 24-Bit Quad Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4/8 Bit Overlay
- 8 Bit Double Buffered Alpha
- 8 bit Stencil/Clip Planes
- 8 windows ID bits
- 1 Rectangular Scissor region
- 5 HW Rectangular Clippers
- Texture Mapping
- up to 108MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- Texture color table
- Video Support
- Bilinear Scaling
- Color Space Conversion
- 4 Hardware Color Maps
- Gamma corrected AA lines
- HW occlusion culling
API support - X11, graPHIGS, OpenGL 1.2
Monitor Support
- Resolution Supported: 8/24 bit (up to 2048 x 1536 @ 60Hz)
- DDC2B support
- ISO 9241 Compliant
Software Requirements: AIX V4.3.3
The GXT4000P is packaged on a standard single-slot PCI card. The PCI
interface is 64-bit, up to 66 MHz and 3.3V. There are no options. It is
supported on 7044 Models 170 and 270 (and the 7043 Model 270 upgrade).
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 32 or 64-bit slot 3.3V
- For 7044-270: (#2826)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3
- Initial Order/MES/Both/Supported: Both
(#2827) POWER GXT6000P Graphics Accelerator
(No Longer Available as of December 6, 2002)
IBM POWER GXT6000P -- Mid-range, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Geometry Accelerator on-board delivering highest ever IBM 3D graphics
performance
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
The GXT6000P Graphics Accelerator is a 64-bit mid-range 3D PCI
Graphics adapter for the RS/6000 Models 7044-170 and 7044-270 (and
7043-270 upgrade). The graphics subsystems, matched to the POWER 3
II-based workstations provide excellent functionality and performance for
demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for
automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer
- 24 Bit Double Buffered up to 1920 x 1200
- 24-Bit Quad Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4/8 Bit Overlay
- 8 Bit Double Buffered Alpha
- 8 bit Stencil/Clip Planes
- 8 windows ID bits
- 1 Rectangular Scissor region
- 5 HW Rectangular Clippers
- Texture Mapping
- up to 108MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- Texture color table
- Video Support
- Bilinear Scaling
- Color Space Conversion
- 4 Hardware Color Maps
- Gamma corrected AA lines
- HW occlusion culling
API support - X11, graPHIGS, OpenGL 1.2
Monitor Support
- Resolution Supported: 8/24 bit (up to 2048 x 1536 @ 60Hz)
- DDC2B support
- ISO 9241 Compliant
Software Requirements: AIX V4.3.3
The GXT6000P is packaged on a standard single-slot PCI card. The PCI
interface is 64-bit, up to 66 MHz and 3.3V. There are no options. It is
supported on 7044 Model 170 and 270 (and the 7043 Model 270 upgrade).
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 64 or 32-bit slot 3.3V
- For 7044-270: (#2827)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3
- Initial Order/MES/Both/Supported: Both
(#2830) POWER GXT130P Graphics Accelerator
(No Longer Available as of April 30, 2003)
The POWER GXT130P is a versatile, low-priced graphics accelerator for
RS/6000 PCI-bus systems. It is a half-length PCI card with a standard
15-pin DIN output connector and can support multisync monitors with at
least a 64 KHz horizontal scan capability or DDC-2B-compliant multisync
monitors with at least a 38 KHz horizontal scan capability.
Ultimedia Services 2.2.0 and Xlib APIs are supported on AIX Version
4.2.1 or 4.3.
For MES orders of the GXT130P Graphics Accelerator:
- If your operating system was installed with AIX Version 4.2.1 before
October 1998, you must apply the following AIX Version 4.2.1 refresh for
October 1998 (this includes boot media and the additional device drivers
required that are included with the feature.)
- AIX Version 4.2.1 LCD4-0238-02
- If you have AIX Version 4.2.1 (LCD4-0238-00 or LCD4-0238-01), update
to LCD4-0238-02 to run this program.
- Attributes provided: Graphics adapter
- Attributes required: 1 PCI slot
- For 7044-270: (#2830)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2841) POWER GXT300P Graphics Accelerator
(No Longer Available as of April 26, 2002)
The Power GXT300P Graphics Accelerator is for mid-range 2D design and
visualization solutions. The GXT300P Graphics Accelerator is a short PCI
adapter card requiring one PCI slot. It supports display resolutions up
to 1600 x 1200 (maximum) at up to 85 Hz.
The GXT300P complies with the ISO 9241 Part 3 and Part 8 standard, and
allows up to 16.7 million simultaneous colors. For XWindows, the GXT300P
offers support for 8-bit and 24-bit double buffered color.
Characteristics:
- 1600 x 1200 maximum resolution up to 85 Hz
- 8-bit and 24-bit double-buffered color
- 8-bit overlay buffer
- 4-bit window ID buffer
- Four 256-entry hardware color tables
- Separate gamma correction table
- Video support
- Attributes provided: Graphics adapter
- Attributes required: 1 PCI slot
- For 7044-270: (#2841)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2842) - POWER GXT4500P Graphics Accelerator
IBM POWER GXT4500P -- Entry, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
- Digital monitor support
The GXT4500P Graphics Accelerator is a 64-bit entry 3D PCI Graphics
adapter. The graphics subsystems provide excellent functionality and
performance for demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for
automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer
- 24 Bit Double Buffered up to 2048 x 1536
- 24-Bit Double Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4/8 Bit Overlay
- 8 Bit Double Buffered Alpha
- 8 bit Stencil
- 8 windows ID bits
- 4 Clipping Planes
- Scissor Registers
- 5 HW Rectangular Clippers
- Texture Mapping
- up to 110MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- 4 Hardware Color Maps
API support - X11, graPHIGS, OpenGL 1.2
Monitor Support
- Resolutions Supported: 8/16/24 bit (up to 2048 x 1536 @ 60Hz)
- DDC2B support
- ISO 9241-3 and ISO 13406-2 Compliant
Software Requirements: AIX Version 4.3.3 or 5.1, or later
The GXT4500P is packaged on a standard single-slot PCI card. The PCI
interface is 64-bit, up to 66 MHz and 5.0 v or 3.3v. There are no
options.
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 32 or 64-bit slot, 5.0v or 3.3v
- For 7044-270: (#2842)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3 or AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
(#2843) - POWER GXT6500P Graphics Accelerator
IBM POWER GXT6500P -- Mid-range, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Geometry Accelerator on-board delivering highest ever IBM 3D graphics
performance
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
- Digital monitor support
The GXT6500P Graphics Accelerator is a 64-bit mid-range 3D PCI
Graphics adapter. The graphics subsystems provide excellent
functionality and performance for demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for
automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- LifeScience Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer
- 24 Bit Double Buffered up to 2048 x 1536
- 24-Bit Double Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4/8 Bit Overlay
- 8 Bit Double Buffered Alpha
- 8 bit Stencil
- 8 windows ID bits
- 4 Clipping Planes
- Texture Mapping
- up to 110MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- 4 Hardware Color Maps
- Full OpenGL, graPHIGS Geometry Accelerator
API support - X11, graPHIGS, OpenGL 1.2.1
Monitor Support
- Resolutions Supported: 8/24 bit (up to 2048 x 1536 @ 60Hz)
- Digital Monitor Support (up to 1600 x 1200 @ 60Hz)
- DDC2B support
- ISO 9241-3 and ISO 13406-2 Compliant
Software Requirements: AIX Version 4.3.3 or 5.1. or later
The GXT6500P is packaged on a standard single-slot PCI card. The PCI
interface is 64-bit, up to 66 MHz and 5.0 v or 3.3v. There are no
options.
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 32 or 64-bit slot, 5.0v or 3.3v
- For 7044-270: (#2843)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
(#2849) POWER GXT135P Graphics Accelerator with Digital Support
(No Longer Available as of November 27, 2009)
The POWER GXT135P is a versatile, low-priced 2D graphics accelerator
for RS/6000 workstations and pSeries servers. It can be configured to
operate in either 8-bit or 24-bit color modes. This adapter supports
both analog and digital monitors. Its predecessor, Feature Number 2848,
supported only analog monitors.
- Hardware Description
- 128-bit graphics processor
- 8-bit CLUT or 24-bit true color
- 16 MB SDRAM
- 32-bit PCI interface
- Universal PCI (5.0v or 3.3v)
- 1 hardware color map
- Features Supported
- Up to approximately 16.7 million colors
- Rectangular clipping
- 2 analog monitor outputs at up to 1280 x 1024 resolution
- 1 analog monitor output at up to 2048 x 1536 resolution
- 1 digital monitor output at up to 1600 x 1200 resolution
- 60 to 85 Hz refresh rates (ISO 9241, Part 3)
- APIs Supported
- X-Windows and Motif
- UMS 2.3.0 (no hardware scaling)
- Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital
support),or later, or AIX 4.3 (analog support only)
- Attributes provided: 2D Graphics
- Attributes required: 1 PCI slot
- For 7044-270: (#2849)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.1 or AIX 5.2, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2861) ARTIC960Hx 4-Port EIA-232 Cable
(No Longer Available as of June 23, 2006)
(#2862) ARTIC960Hx 4-Port RS-449 Cable
(No Longer Available as of July 31, 2001)
- Attributes provided: 4-port RS-449 cable for (#2947)
- Attributes required: One #2947 adapter
- For 7044-270: (#2862)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
Note: Requires #2947
(#2863) ARTIC960Hx 4-Port X.21 Cable
(No Longer Available as of June 23, 2006)
- Attributes provided: 4-port X.21 cable for (#2947)
- Attributes required: One #2947 adapter
- For 7044-270: (#2863)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
Note: Requires #2947
(#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable
(No Longer Available as of June 23, 2006)
- Attributes provided: 4-port X.35 (DTE) cable for (#2947)
- Attributes required: One #2947 adapter
- For 7044-270: (#2864)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
Note: Requires #2947
(#2865) ARTIC960Hx 4-Port EIA-530 Cable
(No Longer Available as of December 3, 2001)
4-port EIA-5 cable for (#2947).
- Attributes provided: 4-port EIA-530 cable for #2947
- Attributes required: One #2947 adapter
- For 7044-270: (#2865)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
Note: Requires #2947
(#2871) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable
(No Longer Available as of June 25, 2004)
- Attributes provided: Connection of 1 to 4 T1 Trunk lines.
- Attributes required: One (#6310) adapter
- For 7044-270: (#2871)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
Note: Requires #6310
(#2872) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable
(No Longer Available as of June 25, 2004)
(#2873) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port Cable
(No Longer Available as of June 25, 2004)
- Attributes provided: Connection of 1 to 4 E1 Trunk lines.
- Attributes required: One (#6310) adapter
- For 7044-270: (#2873)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
Note: Requires #6310
(#2874) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M Extension Cable
(No Longer Available as of June 25, 2004)
(#2875) IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded, 1.8M 4-Port Cable
(No Longer Available as of December 27, 2002)
- Attributes provided: Connection of 1 to 4 E1 Trunk lines.
- Attributes required: One (#6310) adapter
- For 7044-270: (#2875)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
Note: Requires #6310
(#2876) IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Ungrounded, 1.8M 4-Port Cable
(No Longer Available as of December 27, 2002)
- Attributes provided: Connection of 1 to 4 E1 Trunk lines.
- Attributes required: One (#6310) adapter
- For 7044-270: (#2876)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
Note: Requires #6310
(#2877) IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable
(No Longer Available as of November 26, 2010)
This cable provides the capability to interconnect adapters that
provide H.100 bus connectors. This 4-position cable should be used when
4 or less adapters with H.100 connectors will be interconnected. When
more than 4 and less than or equal to 8 adapters will be connected, the
H.100 Bus 8-Drop Cable (#4353) should be used.
- Attributes provided: H.100 bus connection between adapters
- Attributes required: Two to Four H.100 adapters
- For 7044-270: (#2877)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2878) IBM ARTIC960RxD Quad DTA, SC Bus, 5-Drop Cable
(No Longer Available as of December 27, 2002)
- Attributes provided: SC bus connection between adapters
- Attributes required: Two to Five SC bus adapters
- For 7044-270: (#2878)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2879) IBM ARTIC960RxD Quad DTA, Four H.100 to SC bus Converter Cable
(No Longer Available as of April 26, 2002)
- Attributes provided: Four-H.100 to SC bus conversion. Cable can
attach one to four H.100 adapters to SC bus adapters. (#2878) must be
used with this converter cable to attach the SC bus adapters.
- Attributes required: One to four H.100 adapters, one #2878 SC Bus
Cable, and one SC bus adapter
- For 7044-270: (#2879)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2906) 9.1GB 10,000 RPM Ultra-SCSI 16-bit Enhanced Disk Drive
(No Longer Available as of April 9, 2002)
The 9.1GB 10,000 RPM Ultra SCSI 16-bit 1-inch (25mm)Disk Drive
provides 9.1GB of storage capacity and supports the industry standard
Ultra SCSI interface speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 milliseconds
- Average Latency: 2.99 milliseconds
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 30.5 MBps
Limitation: These disks are supported by AIX Version 4.2.1, and AIX
Version 4.3 or later.
- Attributes provided: The feature is delivered with a disk drive
mounted in a plastic carrier
- Attributes required: One disk drive bay.
- For 7044-270: (#2906)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2908) 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive
(No Longer Available as of May 21, 2001)
The 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive offers high-
performance that provides 9.1GB of storage capacity and supports the
industry Ultra-SCSI interface speed of 40MBps.
Note: Requires Ultra-SCSI adapter to operate at 40 MBps.
Characteristics:
- Form Factor: 1-inch (25mm)high by 4.0-inch (102mm) wide
- Cable included: No
- External Interface: Ultra-SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 Fast 20/ANSISpec X3T10/1071D
- Average Seek Time: 6.7 ms
- Average Latency: 4.17 ms
- Rotational Speed: 7200 RPM
- Maximum Media Data Transfer Rate: 22.4MBps
- Machines ordered with AIX Version 4.1.3, 4.1.4, and 4.1.5 require the
additional APAR IX61149, IX62529, and IX62576 for disks and diagnostics.
- Machines ordered with AIX Version 4.2.0 require the addition of APAR
IX60676, IX62155, and IX62156.
Note: These APARs can be obtained through FixDist or from the IBM Support
Center. For information on Fix Dist, refer to the following URL on the
World Wide Web:
http://aix.boulder.ibm.com/aix.us/fixes
- Attributes provided: 9.1GB of disk storage.
- Attributes required: One half-high disk bay and one SCSI internal
single-ended 16-bit address.
- For 7044-270: (#2908)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2909) 18.2 GB Ultra-SCSI 1" High (25mm) Disk Drive
(No Longer Available as of May 21, 2001)
The 18.2GB Ultra-SCSI 16-bit 1-inch (25 mm) High Disk Drive provides
18.2GB of storage capacity and supports the industry's Ultra-SCSI
interface speed of 40 MBps.
Note: Requires Ultra-SCSI adapter to operate at 40 MBps.
Characteristics:
- Form Factor: 1-inch (25 mm) high by 4.0-inch (102 mm) wide
- Cable included: No
- External Interface: Ultra-SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 Fast 20/ANSISpec X3T10/1071D
- Average Seek Time: 6.7 ms
- Average Latency: 4.17 ms
- Rotational Speed: 7200 rpm
- Maximum Media Data Transfer Rate: 22.4 MBps
- Attributes provided: 18.2GB of disk storage.
- Attributes required: One half-high disk bay and one SCSI internal
single-ended 16-bit address.
- For 7044-270: (#2909)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2934) Asynchronous Terminal/Printer Cable EIA-232
The Asynchronous Printer/Terminal Cable is used for attaching
printers, plotters, and terminals that support the EIA-232 standard to
any asynchronous adapter. This cable is the equivalent of the
combination of FC 2936 (modem cable) and FC 2937 (printer/terminal
interposer) and replaces this method of printer/terminal attachment.
This cable is 3m (9.8 feet) long, uses DB25 connectors and is
supported on all RS/6000 systems using any asynchronous ports. It is
used in conjunction with:
- FC 2931 (8-port Async Adapter EIA232, ISA bus)
- FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136)
- Attributes provided: EIA232 device attachment capability
- Attributes required: Any RS/6000 Asynchronous port
- For 7044-270: (#2934)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2936) Asynchronous Cable EIA-232/V.24
Used to attach a modem to the standard I/O ports with the 10-pin to
25-pin converter cable (shipped with the system), 8-port Cable Assembly,
16-Port Cable Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to
DB-25 Converter Cable feature FC 6402) or the 16-Port EIA-232 Remote
Async Node (with RJ45 to DB25 Converter Cable feature FC 8133). The
cable is 3 meters (9.8 feet) in length.
- Attributes provided: Modem attachment to async or serial port
- Attributes required: Async or serial port
- For 7044-270: (#2936)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
(No Longer Available as of November 27, 2009)
For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All
eight ports are software programmable to support either EIA-232E or
RS-422A protocols, at up to 230K baud.
- Attributes provided: 8 Async ports
- Attributes required: One PCI slot
- For 7044-270: (#2943)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2944) 128-Port Asynchronous Controller, PCI bus
(No Longer Available as of March 31, 2006)
The 128-Port Async Adapter subsystem provides attachment for a high
concentration of asynchronous lines (up to 128) from a single PCI bus
slot. This gives the system the ability to serve a large number of user
of EIA-232 or RS-422 devices such as terminals, printers, and modems.
Two 2.4 Mbps synchronous channels link the adapter to a maximum of
eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to
each synchronous channel.
The new RANs being announced provide 16 EIA-232 (#8137) or 16 RS-422
(#8138) ports yielding a total of 128-ports in a maximum configuration.
Existing RANs feature numbers 8130, 8134, or 8136 can also be used
with this adapter. If these RANs are connected the synchronous channel
the data rate drops down to 1.2 Mbps. For the best results keep the
previous and new RANs on separate synchronous channels.
- Attributes provided: Up to 128 Async Ports
- Attributes required: One PCI slot, One to eight (#8137) or (#8138)
- For 7044-270: (#2944)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2945) Asynchronous Terminal Cable - EIA-422A
(No Longer Available as of July 31, 2001)
Provides a 20 meter (66 feet) interface cable for attaching an
EIA-422A Terminal to an Asynchronous Adapter
- Attributes provided: EIA-422A attachment capability
- Attributes required: Asynchronous Adapter EIA-422A
- For 7044-270: (#2945)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2946) Turboways 622 Mbps PCI MMF ATM Adapter
(No Longer Available as of December 17, 2004)
The IBM Turboways 622 Mbps PCI MMF ATM Adapter is a 64-bit, Universal
PCI Adapter. This adapter provides direct access to the ATM network at a
dedicated 622 Mbps full-duplex connection. The Turboways 622 Mbps PCI
MMF ATM Adapter is a short form-factor adapter that interfaces to the
system via the PCI bus and connects to the 622 Mbps ATM network via
dual-SC type, multi-mode fiber cables. The Turboways 622 Mbps PCI MMF
ATM Adapter utilizes 16MB of SDRAM for control and 16MB of SDRAM for
packet memory. This ATM adapter also provides a hardware assist for TCP
checksum which can provide a performance improvement by minimizing the
host CPU cycles.
- Attributes provided: One full-duplex connection to 622 ATM network
- Attributes required: One available PCI card slot
- For 7044-270: (#2946)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 with 4330-05 Recommended Maintenance
Package or later support.
- Initial Order/MES/Both/Supported: Both
(#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
(No Longer Available as of October 13, 2006)
The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one-
slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of:
EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of
up 2.0M bps. Software support is provided by ARTIC960 Support for AIX,
Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC
and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that
provide AIXLink X.25 LPP Version 1.1.5 support.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:
- http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: One to four WAN connections at up to 2.0Mbps
- Attributes required: One full length 32-bit PCI slot, AIX Version
4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5,
4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support).
- For 7044-270: (#2947)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2951) Cable, V.24 / EIA-232
(No Longer Available as of December 30, 2005)
V.24 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7044-270: (#2951)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2952) Cable, V.35
(No Longer Available as of December 30, 2005)
V.35 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7044-270: (#2952)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2953) Cable, V.36 / EIA-499
(No Longer Available as of December 30, 2005)
V.36/EIA-499 cable for use with #2962 - 2-Port Multiprotocol Adapter.
Maximum of two cables per #2962.
- For 7044-270: (#2953)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2954) Cable, X.21
(No Longer Available as of December 30, 2005)
X.21 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- For 7044-270: (#2954)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#2962) 2-Port Multiprotocol PCI Adapter
(No Longer Available as of December 30, 2005)
This adapter provides high-speed connections between stand-alone
system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI
Adapter connects via external communications equipment including Channel
Service Units (CSU), Data Service Units (DSU), or through synchronous
modems.
This adapter together with IBM AIXlink/X.25 provides a two-port
connection to X.25 packet switched networks. IBM AIXlink/X.25 is a
separately orderable LPP (5696-926).
2-Port Multiprotocol PCI Adapter with an appropriate cable is
compatible with:
- X.21 DCE - Using 2-Port Cable, X.21 (#2954)
- CCITT X.21 Signalling
- CCITT V.11 Electrical
- CCITT X.27 Electrical
- EIA-422-A Electrical
- ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable
- V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951)
- CCITT V.24 Signalling
- CCITT V.28 Electrical
- CCITT X.21bis Electrical and Signalling
- EIA-232-C Electrical and Signalling
- ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable
- V.35 DCE - Using 2-Port Cable, V.35 (#2952)
- CCITT V.35 Some signals for signalling
- CCITT V.28 Some signals for electrical and signalling
- ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable
- V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953)
- CCITT V.10 Electrical
- CCITT V.11 Electrical
- Attributes provided: Two high speed WAN connections
- Attributes required: One PCI slot
- For 7044-270: (#2962)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2963) TURBOWAYS 155 PCI UTP ATM Adapter
(No Longer Available as of December 3, 2001)
Provides dedicated, 155 Mbps full-duplex connection to ATM networks
over either permanent virtual circuits (PVC) or switched virtual circuits
(SVC). This adapter enables TCP/IP to run over an ATM network with
Category-5 Unshielded Twisted Pair (UTP). It also supports communication
with devices located on an ATM network or bridged to a token-ring,
Ethernet, or other LAN.
- Attributes provided: One ATM 155 UTP connector
- Attributes required: One PCI slot
- For 7044-270: (#2963)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2968) IBM 10/100 Mbps Ethernet PCI Adapter
(No Longer Available as of December 3, 2001)
Provides a 10 Mbps (10BaseT) or 100 Mbps (100BaseTx) full-duplex
Ethernet LAN connection. The adapter supports 32-bit bus master PCI
connection to the host system for enhanced data throughput and lower bus
utilization. The adapter supports Category-5 Unshielded Twisted Pair.
- Attributes provided: One 10/100 Mbps Ethernet connector
- Attributes required: One PCI slot
- For 7044-270: (#2968)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2969) Gigabit Ethernet - SX PCI Adapter
(No Longer Available as of December 12, 2003)
Provide a 1 Gbps (1000Base-SX) full-duplex Ethernet LAN connection.
An additional function called 'LARGE SEND' is now available. This
function offloads the TCP resegmentation operation from the AIX IP layer
to the adapter for outgoing (transmit side) TCP segments. This function
is only available on AIX version 5.1 with AIX Update CD LCD4-1103-01 or
later.
- Attributes provided: One full-duplex 1000Base-SX fiber connection to
a Gigabit Ethernet switch.
- Attributes required: Available 64 bit PCI slot, AIX 4.3.2 or later
is required for Hardware Checksum and Jumbo Frame support.
- For 7044-270: (#2969)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2975) 10/100/1000 Base-T Ethernet PCI Adapter
(No Longer Available as of December 12, 2003)
10/100/1000 Base-T Ethernet PCI Adapter is a Full Duplex Gigabit
Ethernet adapter designed with highly integrated components to optimize
cost and performance. The adapter interfaces to the system via the PCI
bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted
Pair (UTP) cable for distances of up to 100m. The 10/100/1000 Base-T
Ethernet PCI Adapter supports jumbo frames (up to 9000 bytes) for full
duplex Fast & Gigabit Ethernet.
An additional function called 'LARGE SEND' is now available. This
function offloads the TCP resegmentation operation from the AIX IP layer
to the adapter for outgoing (transmit side) TCP segments. This function
is only available on AIX version 5.1 with AIX Update CD LCD4-1103-01 or
later.
AIX's Network Install Manager (NIM) boot capability is supported with
this adapter provided your system firmware is at the proper support
level. Systems manufactured prior to July, 2001 may require a firmware
update. Check the following web URL to review and download latest
firmware if needed:
http://www.austin.ibm.com/support/micro/
Note: For optimum performance, adapter should be placed in a 64 bit PCI
card slot.
Limitation:
- The 1000 Mbps speed is not supported in Half Duplex (HDX) mode.
- Attributes provided: One full-duplex 1000Base-T UTP connection to a
Gigabit Ethernet LAN.
- Attributes required: One available PCI card slot
- For 7044-270: (#2975)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 with 4330-05 Recommended Maintenance
Package or later support.
- Initial Order/MES/Both/Supported: Both
(#2988) TURBOWAYS 155 PCI MMF ATM Adapter
(No Longer Available as of December 3, 2001)
Also provides direct access to ATM networks. The TURBOWAYS 155 PCI
MMF ATM Adapter provides dedicated 155Mbps full-duplex
connection using PVCs or SVCs and enables TCP/IP to run over an ATM
network. The adapter also supports communication with devices located on
an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.
Note: Systems ordered with AIX preinstalled will have the device drivers
installed on the hard disk drive.
TURBOWAYS 155 PCI MMF ATM Adapter is compatible with:
- IBM 8285 ATM Workgroup Switch
- IBM 8260 ATM Subsystem
- IBM 8282 ATM Concentrator
- IBM 8281 ATM LAN Bridge
- Attributes provided: One ATM 155Mbps connection
- Attributes required: One PCI slot
- For 7044-270: (#2988)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#2998) TURBOWAYS 25 ATM PCI Adapter
(No Longer Available as of October 17, 2001)
For direct access to ATM networks, the TURBOWAYS 25 ATM PCI Adapter
provides dedicated 25Mbps full-duplex connection using PVCs or
SVCs and enables TCP/IP to run over an ATM network. The adapter also
supports communication with devices located on an ATM network or bridged
to a Token-Ring, Ethernet, or other LAN.
Note: AIX drivers are shipped on diskette with the hardware feature.
Systems ordered with AIX preinstalled will have the device drivers
installed on the hard disk drive.
Limitation: AIX 5.1 or later support for this adapter is limited to
the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support
this adapter.)
- Attributes provided: One ATM 25Mbps connection
- Attributes required: One PCI slot
- For 7044-270: (#2998)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#3027) 9.1GB 10,000 RPM Ultra-SCSI Disk Drive
(No Longer Available as of April 9, 2002)
The 9.1GB 10,000 RPM Ultra SCSI Disk Drive provides 9.1GB of storage
capacity and supports the industry standard Ultra SCSI interface speed of
40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 milliseconds
- Average Latency: 2.99 milliseconds
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 30.5 MBps
Limitation: These disks are supported by AIX Version 4.2.1, and AIX
Version 4.3 or later.
- Attributes provided: The feature is delivered with a disk drive
mounted in a plastic carrier
- Attributes required: One disk drive bay.
- For 7044-270: (#3027)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#3029) 9.1GB Ultra-SCSI 16-bit Enhanced Disk Drive
(No Longer Available as of May 21, 2001)
The 9.1GB Ultra SCSI 16-bit Enhanced Disk Drive offers high-
performance that provides 9.1GB of storage capacity and supports the
industry Ultra SCSI interface speed of 40MBps.
Note: Requires Ultra SCSI adapter to operate at 40 MBps.
Characteristics:
- Form Factor: 1-inch (25mm)high by 4.0-inch (102mm) wide
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 Fast 20/ANSI Spec X3T10/1071D
- Average Seek Time: 6.7 ms
- Average Latency: 4.17 ms
- Rotational Speed: 7200 RPM
- Maximum Media Data Transfer Rate: 22.4MBps
- Attributes provided: 9.1GB of disk storage.
- Attributes required: One half-high disk bay and one SCSI internal
single-ended 16-bit address.
- For 7044-270: (#3029)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#3102) 18.2 GB 10,000 RPM Ultra SCSI Disk Drive
(No Longer Available as of August 8, 2003)
The 18.2 GB 10,000 RPM Ultra SCSI Disk Drive provides 18.2 GB of
storage capacity and supports the industry standard Ultra SCSI interface
speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 milliseconds
- Average Latency: 2.99 milliseconds
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 44.3 MBps
- Attributes provided: 18.2 GB storage capacity
- Attributes required: One disk drive bay
- For 7044-270: (#3102)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#3103) 18.2GB Ultra-SCSI Enhanced Disk Drive
(No Longer Available as of May 21, 2001)
The 18.2GB Ultra-SCSI 16-bit Enhanced High Disk Drive provides 18.2GB
of storage capacity and supports the industry's Ultra-SCSI interface
speed of 40 MBps.
Note: Requires Ultra-SCSI adapter to operate at 40 MBps.
Characteristics:
- Form Factor: 1-inch (25 mm) high by 4.0-inch (102 mm) wide
- Cable included: No
- External Interface: Ultra-SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 Fast 20/ANSISpec X3T10/1071D
- Average Seek Time: 6.7 ms
- Average Latency: 4.17 ms
- Rotational Speed: 7200 rpm
- Maximum Media Data Transfer Rate: 22.4 MBps
- Attributes provided: 9.1GB of disk storage.
- Attributes required: One half-high disk bay and one SCSI internal
single-ended 16-bit address.
- For 7044-270: (#3103)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#3110) 18.2GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
(No Longer Available as of August 8, 2003)
The 18.2GB 10,000 RPM Ultra SCSI 16-bit 1-inch (25mm) high disk drive
provides 18.2GB of storage capacity and supports the industry standard
Ultra SCSI interface speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable Included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 milliseconds
- Average Latency: 2.99 milliseconds
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 44.3 MBps
- Attributes provided: 18.2GB of disk storage mounted in a carrier
- Attributes required: One disk drive bay
- For 7044-270: (#3110)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#3124) Serial to Serial Port Cable for Drawer/Drawer
This cable is available to provide a null-modem connection between the
serial ports of two system drawers that are mounted within the same rack.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#3124)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#3118) 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive
(No Longer Available as of December 10, 2004)
The 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive provides 73.4 GB of
storage capacity and supports the industry standard Ultra3 SCSI interface
speed of 160 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra3 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI-3 fast 80
- Average Seek Time: 5.38 ms (based on four READS to one WRITE)
- Average Latency: 3.00 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 83.88 MBps
Note: This disk drive requires attachment to a supported Ultra3 SCSI
adapter in a system that supports an Ultra3 SCSI cable/backplane for the
drive to run at 160 MBps. Any and all other SCSI device(s) on the same
SCSI bus must also be Ultra2 or Ultra3 SCSI device(s) for this disk drive
to run at 160 MBps.
- Attributes provided: 73.4 GB of disk storage.
- Attributes required: One disk drive bay.
- For 7044-270: (#3118)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3119) 36.4GB 10,000 RPM Ultra SCSI Disk Drive
(No Longer Available as of December 10, 2004)
The 36.4GB 10,000 RPM Ultra SCSI Disk Drive provides 36.4GB of storage
capacity and supports the industry standard Ultra SCSI interface speed of
40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 44.3 MBps
Note: Ultra SCSI disk drives require attachment to a supported Ultra
SCSI Adapter for the drive to run at 40 MBps.
- Attributes provided: 36.4GB of disk storage
- Attributes required: One disk drive bay.
- For 7044-270: (#3119)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#3128) 36.4GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
(No Longer Available as of December 10, 2004)
The 36.4GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive provides
36.4GB of storage capacity and supports the industry standard Ultra SCSI
interface speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single Ended)
- Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
- Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 44.3 MBps
Note: Ultra SCSI disk drives require attachment to a supported Ultra
SCSI Adapter for the drive to run at 40 MBps.
- Attributes provided: 36.4GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7044-270: (#3128)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#3125) Serial to Serial Port Cable for Rack/Rack
This cable is available to provide a null-modem connection between the
serial ports of two system drawers that are mounted in separate racks.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#3125)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#3163) 73.4 GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive
(No Longer Available as of December 10, 2004)
The 73.4 GB 10,000 RPM Ultra SCSI 16-bit Enhanced Disk Drive provides
73.4 GB of storage capacity and supports the industry standard Ultra SCSI
interface speed of 40 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra SCSI (16-bit, Single-Ended)
- Attachment Industry Spec: SCSI-3 fast 20
- Average Seek Time: 5.38 ms (based on four READS to one WRITE)
- Average Latency: 3.00 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 83.88 MBps
Note: Ultra SCSI disk drives require attachment to a supported Ultra SCSI
adapter for the drive to run at 40 MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 7044-270: (#3163)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or AIX 5.1, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3627) IBM P76/P77 Color Monitor, Business Black, Captured Cable
(No Longer Available as of July 25, 2003)
The P76/P77 monitor has the following general characteristics:
- Business Black color
- 17-inch Flat Trinitron** CRT with a viewable image size of 406 mm
(16.0 inches) measured diagonally, incorporating a 0.24 mm stripe pitch
for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum 1024 x
768 pels at up to 85 Hz non-interlaced, with a maximum addressability of
1600 x 1200 pels at 70Hz.
Note: The P76 and P77 monitors are functionally equivalent.
(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable
(No Longer Available as of February 27, 2004)
The P260/P275 monitor has the following general characteristics:
- Business Black color
- 21-inch Flat Trinitron** CRT with a viewable image size of 503 mm
(19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch
for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum
addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.
Note: The P260 and P275 monitors are functionally equivalent.
(#3629) IBM P76/P77 Color Monitor, Pearl White, Captured Cable
(No Longer Available as of December 31, 2002)
The P76/P77 monitor has the following general characters:
(#3630) IBM P260/P275 Color Monitor, Pearl White, and Cable
(No Longer Available as of December 31, 2002)
The P260/P275 monitor has the following general characters:
(#3635) - T210 Flat-Panel Monitor
(No Longer Available as of February 18, 2003)
The T210 flat-panel monitor has the following general characteristics:
(#3636) L200P Flat Panel Monitor
(No Longer Available as of June 16, 2006)
The L200p flat-panel monitor has the following general
characteristics:
(#3637) IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable
(No Longer Available as of June 16, 2006)
The T541H and the L150p monitors have the following general
characteristics:
- Business Black color
- 15-inch TFT LCD digital screen with a viewable image size of 381 mm
(15.0 inches) measured diagonally, incorporating a 0.297 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in
digital mode.
- Tilt/swivel stand
- Supports 2D Graphics Adapters only
- Attributes provided: Color Flat-panel Monitor
- Attributes required: 2D Graphics Adapter
- For 7044-270: (#3637)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
(No Longer Available as of June 24, 2005)
The IBM C220p monitor has the following general characteristics:
- Business Black color
- 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508
mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel
pitch for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum and
maximum supported addressability of 1600 x 1200 pels at up to 85 Hz
(Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).
- Tilt/swivel stand
- Dual input allows attachment to two systems concurrently.
- Depth: 483.6 mm (19.0 in.)
- Height: 516.4 mm (20.3 in.)
- Width: 512.8 mm (20.2 in.)
- Weight: 30.5 kg (67.2 lbs.)
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7044-270: (#3638)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3639) IBM ThinkVision L170p Flat Panel Monitor
(No Longer Available as of September 30, 2005)
The IBM ThinkVision L170p LCD flat-panel monitor has the following
general characteristics:
- Business color
- 17.0-inch LCD digital screen with a viewable image size of
432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm
pixel pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees
- Contrast ratio: 500:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7044-270: (#3639)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3640) - IBM ThinkVision L171p Flat Panel Monitor
(No Longer Available as of June 16, 2006)
The IBM ThinkVision L171p LCD flat-panel monitor has the following
general characteristics:
- Business black color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.280mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees
- Contrast ratio: 500:1 (minimal) 700:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7044-270: (#3640)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3642) - ThinkVision L191P Flat Panel Monitor
(No Longer Available as of June 16, 2006)
The ThinkVision L191p LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 19.0-inch LCD digital screen with a viewable image size of 483 mm
(19.0 inches) measured diagonally, incorporating a 0.294mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 408.0 mm (16.1 in.)
- Weight: 7.1 kg (15.7 lbs.)
- Contrast ratio: 1000:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 7044-270: (#3642)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3752) Service Package
(No Longer Available as of January 7, 2011)
This kit contains service publications, wrap plugs, and diagnostic
CD-ROM. It also includes Maintenance Analysis Procedures (MAPs) that are
not common to other RS/6000 systems. The "Diagnostics Information for
Multiple Bus Systems" contains information common to all multiple bus
system units and is used primarily for problem isolation by a customer's
service specialist trained on the unit being serviced.
These publications are intended to be used in the customer's
enterprise by the customer's own service specialists, and not by IBM
Service personnel.
Two wrap plugs are included for use in diagnostic testing of the
following connections to the system unit:
- RS-232 serial I/O port
- parallel I/O port
This kit also contains system diagnostic CD-ROM, along with a test
diskette, for use by the customer's service specialist (not by IBM
Service personnel).
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#3752)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#3753) Options Library (hard copy)
(No Longer Available as of May 26, 2000)
This feature provides a hardcopy version of the options publications.
Also available via PUBORDER (SK2T-7452).
- Attributes provided: Hardcopy of options publications
- Attributes required: None
- For 7044-270: (#3753)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#3925) Serial Port Converter Cable, 9-Pin to 25-Pin
This cable converts the 9-pin serial port on the system to a 25-pin
serial port which allows the user to attach 25-pin serial devices to the
system.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#3925)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#3926) Async Printer/Terminal Cable, 9-pin to 25-pin, 4m
(No Longer Available as of July 29, 2011)
This 4 meter cable allows external asynch devices such as printers or
cables to be attached directly to the 9-pin serial port.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#3926)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required:
- Initial Order/MES/Both/Supported: Both
(#4098) Memory Expansion Feature (16 POS)
(No Longer Available as of December 10, 2004)
This memory card has 16 DIMM slots. Memory features #4106, #4107,
#4110, and #4119 may be plugged into the slots to provide up to 4 GB of
system memory per #4098 card.
- Attributes provided: 16 DIMM slots supporting up to 4 GB of system
memory
- Attributes required: one memory card slot
- For 7044-270: (#4098)
- Minimum required: 1
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#4110) 256MB(2X128MB) DIMMS, 200 pin 10NS SDRAM
(No Longer Available as of December 10, 2004)
Provides 256MB of system memory with two 128MB SDRAM DIMMs.
(#4119) 512MB (2X256MB) DIMMs, 200-pin 10NS SDRAM
(No Longer Available as of August 15, 2000)
Provides 512MB system memory with two 256MB DIMMS.
- Attributes provided: 512 MB System Memory
- Attributes required: Two empty memory DIMM positions.
- For 7044-270: (#4119)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
Note: Maximum of 8 #4119 for each memory card #4098.
(#4120) 512MB (2x256MB) Memory DIMMS
(No Longer Available as of December 10, 2004)
Provides 512MB system memory with two 256MB DIMMs.
- Attributes provided: 512MB System Memory
- Attributes required: Two empty memory DIMM postions.
- For 7044-270: (#4120)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
Note: Maximum of 8 #4120 for each memory card #4098.
(#4121) 1024MB (2 X 512MB) DIMMs, 200-pin 10NS SDRAM
(No Longer Available as of March 21, 2008)
Provides 1024MB of system memory with 2 512MB DIMMS.
- Attributes provided: 1024MB of system memory
- Attributes required: Two empty memory DIMM positions.
- For 7044-270: (#4121)
- Minimum required: 0
- Maximum allowed: 16 (Initial order maximum: 16)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
Note: Maximum of 8 #4121 for each memory card #4098.
(#4217) 6091 Attachment Cable
(No Longer Available as of July 31, 2001)
This display cable is required for attachment of an IBM 5081 or IBM
6091 display. The cable is 1.8 meters (6 ft) in length.
(#4223) Ethernet 10Base2 Transceiver
(No Longer Available as of June 25, 2004)
The 10Base2 Ethernet transceiver is compatible with Ethernet/IEEE
802.3 transceiver specifications and 10 MBps Ethernet CSMA/CD operation,
to provide a connection to thin Ethernet coaxial cable (10Base2). It is
connected to a 15-pin DIX Ethernet connection via a transceiver (AUI)
cable and converts the signal to 10Base2. The medium connection is made
through a BNC coaxial connector.
Features include:
- Selectable SQE signal via external toggle switch
- Power LED
- Dimensions: 2-7/8 inches x 2-1/8 inches
- Attributes provided: 1 Ethernet 10Base2 connection
- Attributes required: 1 Ethernet thick connection
- For 7044-270: (#4223)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#4224) Ethernet 10BaseT Transceiver
(No Longer Available as of July 31, 2001)
The Ethernet 10BaseT Transceiver provides the complete Attachment Unit
Interface (AUI) to a twisted pair LAN connection. It is connected to a
15-pin DIX Ethernet connection via a transceiver (AUI) cable and converts
the signal to 10BaseT. The medium connection is made through an RJ-45
receptacle.
Features include:
- Selectable Link Test via external toggle switch
- Selectable SQE signal via internal jumper
- Five LEDs
- Transmit
- Receive/Link
- Collision
- Jabber
- Dimensions: 2 7/8" x 2 1/8"
- Attributes provided: 1 ethernet 10baseT connection
- Attributes required: 1 ethernet thick connection
- For 7044-270: (#4224)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#4237) 13W3 to 15-pin DDC/ID Bits Switchable Display Cable
(No Longer Available as of December 3, 2001)
This cable attaches displays with 13W3 video connectors to graphics
adapters with 15-pin connectors. There is a switch in the cable that is
used to enable or disable Plug and Play. When disabled, ID Bits are
presented to the attaching system.
- Attributes provided: Connection between display and graphics adapter
- Attributes required: Graphics adapter with 15 pin D-shell connector
- For 7044-270: (#4237)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#4238) DDC 15 Pin to 13W3 Display Cable
(No Longer Available as of December 3, 2001)
This converter cable attaches displays with a 13W3 connector that
either are DDC (Display Data Channel) capable or do not need ID bits to a
graphics adapter with a 15-pin D-shell connector.
(#4239) 15-D Adapter to 3BNC ID Cable
(No Longer Available as of July 31, 2001)
This cable attaches displays with a 3BNC video connector to graphics
adapters with a 15-pin D-shell connector.
(#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell)
This cable is required when ordering an appropriately supported
monitor and adapter with a 15-pin "D" shell connector.
(#4361) 1-way 375 MHz POWER3-II Processor card
(No Longer Available as of September 22, 2004)
1-way processor card with 375MHz POWER3-II processor and 4MB of L2
cache.
- Attributes provided: 1-way processor
- Attributes required: 1 processor card slot
- For 7044-270: (#4361)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#4362) 2-way 375 MHz POWER3-II Processor Card
(No Longer Available as of December 10, 2004)
2-way processor card with 375MHz POWER3-II processor with 4MB of L2
cache.
- Attributes provided: 2-way processor
- Attributes required: 1 processor card slot
- For 7044-270: (#4362)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#4365) 2-WAY 375MHz POWER3-II Processor Card (8MB L2/Processor)
(No Longer Available as of September 22, 2004)
2-way processor card with 375 MHz POWER3-II processor with 8 MB of L2
cache.
(#4366) - 2-WAY 450MHz POWER3-II Processor Card (8MB L2/Processor)
(No Longer Available as of December 10, 2004)
2-way processor card with 450 MHz POWER3-II processor with 8 MB of L2
cache.
(#4951) IBM Four Port 10/100 Ethernet Adapter
(No Longer Available as of December 3, 2001)
IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter for RS/6000 is a single
slot, long, 64-bit 33 MHz PCI adapter supporting 4 industry standard
Ethernet 10Base-T or 100 Base-T interfaces either half or full duplex.
Each port is provided with it's own RJ-45 connector for attachment to
standard CAT-3/5 Unshielded Twisted Pair, UTP cable. The adapter is IEEE
802.3u compatible and provides full auto-negotiation for detecting speed
and duplex capability across each port.
Network boot capability and Network Install Manager (NIM) capability
are available using this adapter if no specific limitation is stated.
The IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter (#4951) should be
considered where maximum port density is required per I/O card slot.
But, for high end systems, where card slots are not the limiting factor
and maximum throughput is required, the single port IBM 10/100 Mbps
Ethernet PCI Adapter II (#4962) or 10/100 Mbps Ethernet PCI Adapter
(#2968) are the preferred solutions.
Below are some performance factors to consider when choosing the right
adapter for your needs. These performance comparisons are based on all
four ports of the IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter (#4951)
being active.
- With all four ports under full bandwidth conditions, a single IBM
4-Port 10/100 Base-Tx Ethernet PCI Adapter (#4951) is expected to deliver
up to 3 times the comparable performance of a single IBM 10/100 Mbps
Ethernet PCI Adapter II (#4962) or 10/100 Mbps Ethernet PCI Adapter
(#2968).
- Under most conditions, each port of the IBM 4-Port 10/100 Base-Tx
Ethernet PCI Adapter (#4951) is expected to perform at greater than 50%
the throughput of the single port of the IBM 10/100 Mbps Ethernet PCI
Adapter II (#4962) or 10/100 Mbps Ethernet PCI Adapter (#2968).
Note: The resulting performance in your environment compared to the
above may vary and depends upon the RS/6000 model, the I/O configuration,
and associated workload of your applications.
- Attributes provided: 4 port of 10/100 Base-Tx Ethernet
- Attributes required: 1 PCI slot
- For 7044-270: (#4951)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 4.3.3. or later
- Initial Order/MES/Both/Supported: Both
(#4958) PCI Cryptographic Coprocessor
(No Longer Available as of December 3, 2001)
The IBM PCI Cryptographic Coprocessor is a 2/3 length PCI adapter
combining hardware and software to provide high performance secure
hardware engines for secure internet transactions such as secure data
exchange, verifying electronic signatures, bulk data encryption and
decryption. Cyrptographic processes are performed within a tamper proof
enclosure on the adapter that is designed to meet FIPS PUB 140-1 standard
for commercial cryptographic devices at Level 3.
Security functions supported by the adapter includes:
- Data Encryption Standard (DES) (56 and 40 bit keys) encryption and
decryption, with pre-and post-padding; the coprocessor uses both
electronic and codebook (ECB) and cipher block chain (CBC) modes of
encryption.
- Message Authentication (MAC) and financial PIN processing
- Triple DES encryption and decryption of general data
- Secure RSA key-pair generation
- RSA signature generation and signature verification
- Secure Hashing Algorithm (SHA-1) in hardware
- Hardware random number generation
- Secure data storage and retrieval
- Other non-cryptographic security utilities can be carried out using
the onboard processor
IBM offers software to enable your use of the Coprocessors. Two
different approaches to cryptographic functions are offered for download
from the http://www.ibm.com/security/cryptocards website:
- PKCS #11 Version 2.01, an implementation of the industry-standard API
- IBM Common Cryptographic Architecture (CCA), featuring support of
special interest to the finance industry.
Under custom contract, IBM also offers toolkits that you can employ to
develop extensions to the CCA offering and to develop your own
application to exploit the secure computing environment and cryptographic
hardware. For more information on custom contracts, refer to Web site
- http://www.ibm.com/security/cryptocards
For additional information on the IBM PCI Cryptographic Coprocessor,
refer to the following World Wide Web page:
- http://www.ibm.com/security/cryptocards
Limitations:
- The IBM PCI Cryptographic Coprocessor Adapter is a field only
installed device in order to meet restrictive shipping requirements.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:
- http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7044-270: (#4958)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX Version 4.3.3 with 4330-05 Recommended
Maintenance Package or later.
- Initial Order/MES/Both/Supported: Both
(#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter
(No Longer Available as of December 17, 2004)
The IBM 64bit/66MHz PCI ATM 155 UTP Adapter provides dedicated, 155
Mbps full-duplex connection to ATM networks over either permanent virtual
circuits (PVC) or switched virtual circuits (SVC). This adapter enables
TCP/IP to run over an ATM network with Category-5 Unshielded Twisted Pair
(UTP). It also supports communication with devices located on an ATM
network or bridged to a Token-Ring, Ethernet, or other LAN.
- Attributes provided: One ATM 155 UTP connector
- Attributes required: One PCI slot
- For 7044-270: (#4953)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and
AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD
LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later.
- Initial Order/MES/Both/Supported: Both
(#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter
(No Longer Available as of March 31, 2006)
The IBM 64bit/66MHz PCI ATM 155 MMF Adapter provides direct access to
ATM networks. This 155 Mbps PCI ATM MMF Adapter provides dedicated 155
Mbps full-duplex connection using permanent virtual circuits (PVC) or
switched virtual circuits (SVC) and enables TCP/IP to run over an ATM
network. The adapter also supports communication with devices located on
an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.
This 155 Mbps PCI MMF ATM Adapter is compatible with:
- IBM 8285 ATM Workgroup Switch
- IBM 8260 ATM Subsystem
- IBM 8282 ATM Concentrator
- IBM 8281 ATM LAN Bridge
- Attributes provided: One ATM 155Mbps MMF connection
- Attributes required: One PCI slot
- For 7044-270: (#4957)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and
AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD
LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later.
- Initial Order/MES/Both/Supported: Both
(#4959) IBM Token-Ring PCI Adapter
(No Longer Available as of March 31, 2006)
The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short,
32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either half-
duplex or full-duplex.
Automatic Ring-Speed selection prevents "wrong speed" insertion into
the ring, even when connected to speed-sensing hubs. This adapter will
operate with either unshielded twisted pair (UTP) Cat. 5 cable with
RJ-45 connectors or shielded twisted pair (STP) Type 1A cabling with
9-pin D-shell connectors. The Token-Ring PCI Adapter PCI Adapter will
provide network boot capability.
- Attributes provided:
- Attributes required: A single empty 32-bit PCI adapter slot.
- For 7044-270: (#4959)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#4960) IBM e-business Cryptographic Accelerator
(No Longer Available as of May 31, 2006)
The IBM e-business Cryptographic Accelerator is a short form factor
PCI Secure Socket Layer (SSL) hardware accelerator adapter. For Secure
Web transaction, SSL operations is a key requirement. To do this,
public-key cryptographic operations using SSL handshake protocol is
employed. The IBM e-business Cryptographic Accelerator is a hardware
cryptographic solution that off-loads this compute-intensive public-key
cryptographic processing from the host.
The overall operation control, including command decoding, is
implemented in hardware and requires no on-card microprocessor subsystem.
As such, the adapter is a less expensive alternative to those who do not
need the high security of the on-card secure programming environment such
as is offered by the PCI Cryptographic Coprocessor(#4958), but do need
the high cryptographic performance that hardware acceleration provides by
offloading the host processor.
Note: The IBM e-business Cryptographic Accelerator is only supported by
the industry standard PKCS #11 application programming interface (API)
Version 2.01, and applications which interface to the PKCS #11 Support
Program.
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7044-270: (#4960)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-13 or
later, AIX 5.1 with AIX Update CD LCD4-1103-00 or later.
- Initial Order/MES/Both/Supported: Both
(#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter
(No Longer Available as of March 31, 2006)
IBM Universal 4-Port 10/100 Ethernet Adapter is a single slot, long,
64-bit, 33 MHz PCI adapter supporting 4 industry standard Ethernet 10
Base-T or 100 Base-T interfaces either half or full duplex. Each port is
provided with it's own RJ-45 connector for attachment to standard CAT-3/5
Unshielded Twisted Pair (UTP) cable. The adapter is IEEE 802.3u
compatible and provides full auto-negotiation for detecting speed and
duplex capability across each port. Network boot capability and Network
Install Manager (NIM) capability are available using this adapter if no
specific limitation is stated. The IBM Universal 4-Port 10/100 Ethernet
Adapter (#4961) should be considered where maximum port density is
required per I/O card slot. But, for high-end systems, where card slots
are not the limiting factor and maximum throughput is required, the IBM
10/100 Mbps Ethernet PCI Adapter II (#4962) or the single port IBM 10/100
Mbps Ethernet PCI Adapter (#2968) are the preferred solutions. Below are
some performance factors to consider when choosing the right adapter for
your needs. These performance comparisons are based on all four ports of
the IBM Universal 4-Port 10/100 Ethernet Adapter (#4961) being active.
- With all four ports under full bandwidth conditions, a single IBM
Universal 4-Port 10/100 Ethernet Adapter (#4961) is expected to deliver
up to three times the comparable performance of a single IBM 10/100 Mbps
Ethernet PCI Adapter II (#4962) or the IBM 10/100 Mbps Ethernet PCI
Adapter (#2968).
- Under most conditions, each port of the IBM Universal 4-Port 10/100
Ethernet Adapter (#4961) is expected to perform at greater than 50% the
throughput of the single port of the IBM 10/100 Mbps Ethernet PCI Adapter
II (#4962) or the IBM 10/100 Mbps Ethernet PCI Adapter (#2968).
Note: The resulting performance in your environment compared to the
above may vary and depends upon the RS/6000 model, the I/O configuration,
and associated workload of your applications.
- Attributes provided: 4 ports of 10/100 Base-Tx Ethernet
- Attributes required: 1 PCI slot
- For 7044-270: (#4961)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-14 or
later, AIX 5.1 or later
- Initial Order/MES/Both/Supported: Both
(#4962) - 10/100 Mbps Ethernet PCI Adapter II
(No Longer Available as of March 31, 2006)
The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single
port PCI ethernet adapter. This high performance, low power ethernet
10/100Mbps LAN adapter can be used in both client and server PCI systems.
The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and
100Base-TX full duplex ethernet LAN connectivity. The adapter supports
Category-5 unshielded twisted pair cabling for both 10/100 Mbps and
Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps
Ethernet PCI Adapter II supports:
After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the
off-load of IP Security cryptographic algorithms by providing hardware
assistance in performing data encryption and authentication. This
support is provided with AIX 5.1 (with appropriate software updates) and
later software. This IP Security function, normally performed with
encryption software by the host, is off-loaded to this adapter to enhance
network traffic throughput and reduce CPU utilization. If you are
running with AIX 5.1, to invoke the IP Security function on the adapter,
you must obtain AIX 5.1 software updates IY27069 and IY26514 or the
5100-02 Recommended Maintenance package. These updates can be obtained
by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD
(LCD4-1103-03) dated 4/2002 or later.
Note: This IP Security function is not supported with AIX 4.3 software.
- Half / Full Duplex 10/100 Mbps Ethernet interface
- 10/100 Mbps data rates
- Auto-negotiation for 10/100 speed and half/full duplex
- Network boot capability and Network Install Manager (NIM)
- IEEE 802.3 Ethernet Specification
- IEEE 802.3u Fast Ethernet Specification
- Attributes provided: One 10/100 Mbps Ethernet port (connector)
- Attributes required: One PCI slot
- For 7044-270: (#4962)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and
AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD
LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later.
- Initial Order/MES/Both/Supported: Both
An additional function called 'Large Send' or sometimes known as TCP
Segmentation is also available. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also available. Both of these functions are
available with AIX version 5.1 with APAR IY38248 or later software, or
AIX version 5.2 with APAR IY38492 or later software.
(#4963) - PCI Cryptographic Coprocessor (FIPS-4)
(No Longer Available as of February 8, 2005)
The PCI Cryptographic Coprocessor (FIPS-4) is a 2/3 length PCI adapter
which combines hardware and software to provide a wide variety of
security services. The PCI Cryptographic Coprocessor (FIPS-4) is a
second generation adapter of the Cryptographic Coprocessor family that
provides high performance secure hardware engines for secure Internet
transactions such as transmitting data, verifying electronic signatures,
bulk data encryption and decryption. In addition, the card is enclosed
in a tamper proof enclosure to restrict access to on card resources,
designed to FIPS 140-1 Level 4 standards.
Security functions supported by the adapter include:
- DES (Data Encryption Standard) (40 and 56 bit key) encryption and
decryption, with pre-and post-padding; the coprocessor uses both ECB
(electronic and codebook) and CBC (cipher block chain) modes of
encryption.
- MAC (Message Authentication) generation and MAC verification services
- Triple DES (three key) encryption and decryption of eight-byte units
- Secure RSA key-pair generation
- RSA signature generation and signature verification at 18
signatures/sec at 2048 bits
- Hardware random number generation
- Secure data storage and retrieval
- Other non-cryptographic security utilities can be carried out using
the onboard processor
As part of this adapter's physical security features, the following
events will cause an adapter shutdown and secure data zeroization.
- Shipping/Storage Temperature less than -15C or greater than 95C
- Dead Battery (VBAT less than 2.4V)
- Supply Voltage greater than 3.3V/12V max
- Mesh Sensor opens/shorts detection
- X-ray exposure
IBM offers software to enable your use of the coprocessors. Two
different approaches to cryptographic functions are offered for download
from the http://www.ibm.com/security/cryptocards Web site:
- PKCS #11 Version 2.01, an implementation of the industry-standard API
- IBM Common Cryptographic Architecture (CCA), featuring support of
special interest to the finance industry.
Under custom contract, IBM also offers toolkits that you can employ to
develop extensions to the CCA offering and to develop your own
application to exploit the secure computing environment and cryptographic
hardware. For more information on custom contracts, refer to Web site
http://www.ibm.com/security/cryptocards.
For additional information on the IBM PCI Cryptographic Coprocessor,
refer to the following World Wide Web page:
- http://www.ibm.com/security/cryptocards
Limitations:
- The IBM PCI Cryptographic Coprocessor Adapter is a field only
installed device in order to meet restrictive shipping requirements.
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7044-270: (#4963)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 with 4330-08 Recommended Maintenance
Package or later, AIX 5.1 or later.
- Initial Order/MES/Both/Supported: Both
(#4964) PCI Cryptographic Coprocessor
(No Longer Available as of May 31, 2006)
The IBM PCI Cryptographic Coprocessor is a 2/3 length PCI adapter
combining hardware and software designed to provide high performance
hardware engines for secure internet transactions such as data exchange,
verifying electronic signatures, bulk data encryption and decryption.
Cryptographic processes are performed within a tamper resistant
enclosure on the adapter that is designed to meet FIPS PUB 140-1
standard for commercial cryptographic devices at Level 3.
Security functions supported by the adapter includes:
- Data Encryption Standard (DES) (56 and 40 bit keys) encryption and
decryption, with pre- and post-padding; the coprocessor uses both
electronic and codebook (ECB) and cipher block chain (CBC) modes of
encryption.
- Message Authentication (MAC) and financial PIN processing
- Triple DES encryption and decryption of general data
- RSA key-pair generation
- RSA signature generation and signature verification
- Secure Hashing Algorithm (SHA-1) in hardware
- Hardware random number generation
- Protected data storage and retrieval
- Other non-cryptographic security utilities can be carried out
using the onboard processor
IBM offers software to enable your use of the Coprocessors. Two
different approaches to cryptographic functions are offered for
download from:
- http://www.ibm.com/security/cryptocards
- PKCS #11 Version 2.01, an implementation of the industry-standard
API
- IBM Common Cryptographic Architecture (CCA), featuring support of
special interest to the finance industry.
Under custom contract, IBM also offers toolkits that you can employ
to develop extensions to the CCA offering and to develop your own
application to exploit the secure computing environment and
cryptographic
hardware. For more information on custom contracts, refer to:
- http://www.ibm.com/security/cryptocards.
For additional information on the IBM PCI Cryptographic Coprocessor,
refer to the following World Wide Web page:
- http://www.ibm.com/security/cryptocards
Limitations:
- The IBM PCI Cryptographic Coprocessor Adapter is a field only
installed device in order to meet restrictive shipping requirements.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:
http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: Data encryption via PCI bus to host
- Attributes required: 1 PCI slot
- For 7044-270: (#4964)
(#5001) Customer Service Specify
(No Longer Available as of November 27, 2009)
This feature code specifies that the system will receive special
request services from the Center for Customer Services (CCS) in
Rochester.
- Attributes provided: Customization
- Attributes required: None
- For 7044-270: (#5001)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#5005) Software Preinstall
Licensed programs may be preinstalled on the media selected. To order
this option, specify code (#5005) on the initial system order. The
preinstalled licensed programs will be at the same release level as
programs being shipped from the Program Libraries at the time the system
is manufactured.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#5005)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#5700) IBM Gigabit Ethernet-SX PCI-X Adapter
The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000
Base-SX) full-duplex Ethernet LAN connection with throughput on a
standard shortwave multimode optical cable which conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5-micron
Multi Mode Fiber (MMF) and 550m for 50.0-micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
Note: For optimum performance, the adapter should be placed in a 64-bit
PCI-X card slot.
Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an
LC type connector on the card. This new, smaller form factor connector
is being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5-Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half-Duplex (HDX) mode is not supported.
- Attributes provided: One full-duplex 1000Base-SX fiber connection to
a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 7044-270: (#5700)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX
5.2 with the 12/2002 or later Update CD
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full-Duplex
Gigabit Ethernet adapter designed with highly integrated components.
This adapter can be configured to run at 10, 100, or 1000 Mbps data
rates. The adapter interfaces to the system via the PCI-X bus and
connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair
(UTP) cable for distances of up to 100m. AIX Network Install Manager
(NIM) boot capability is supported with this adapter. The adapter
conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also
supports jumbo frames when running at the 1000 Mbps speed.
Note: For optimum performance, adapter should be placed in a 64-bit PCI-X
card slot.
Limitations: The 1000 Mbps speed is not supported in Half-Duplex
(HDX) mode.
- Attributes provided: One full-duplex 10/100/1000Base-TX UTP
connection to a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 7044-270: (#5701)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX
5.2 with the 12/2002 or later Update CD
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a
Full-Duplex, dual ported, Gigabit Ethernet adapter designed with highly
integrated components. This adapter can be configured to run each port
at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the
system via a PCI or PCI-X bus and connects to a network using a 4-pair
CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m.
AIX Network Install Manager (NIM) boot capability is supported with this
adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard.
The adapter also supports jumbo frames when running at the 1000 Mbps
speed.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706)
should be considered where maximum port density is required per I/O card
slot. For a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM 10/100/1000 Base-TX
Ethernet PCI-X Adapter (#5701) is the preferred solution. Note: For
optimum performance, the adapter should be placed in a 64 bit PCI-X card
slot whenever possible.
Limitations: The 1000 Mbps speed is not supported in Half-Duplex
(HDX) mode.
- Attributes provided: Two full-duplex 10/100/1000Base-TX UTP
connections to Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 7044-270: (#5706)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps
(1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a
standard shortwave multimode optical cable that conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be
considered where maximum port density is required per I/O card slot. For
a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM Gigabit Ethernet-SX
PCI-X Adapter (#5700) is the preferred solution. Note: For optimum
performance, the adapter should be placed in a 64 bit PCI-X card slot
whenever possible.
Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC
type connector on the card. This new, smaller form factor connector is
being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half-Duplex (HDX) mode is not supported.
- Attributes provided: Two full-duplex 1000Base-SX fiber connections
to a Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 7044-270: (#5707)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6041) 3-Button Mouse
(For IBM, No Longer Available as of March 26, 2004)
The 3-Button Mouse is a dynamic tracking pointing device which
utilizes Opto-mechanical technology. Resolution is 320 DPI. A 2.74
meter (9 ft) attachment cord is included.
- Attributes provided: Mouse capability
- Attributes required: 1 Mouse Port
- For 7044-270: (#6041)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology
(No longer available as of February 29, 2008)
The IBM 80/160 GB Internal Tape Drive with VXA** Technology is a
5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high
capacity for save/restore and achieve functions. This tape drive uses
VXAtape** data cartridges and is compression capable, providing a
capacity of up to 160 GB - a significant increase in capacity over the
previous internal tape drives.
Characteristics:
- Capacity: 80 GB native mode, 160 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: uses VXAtape data cartridges
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression
- Interface: SCSI-2 (LVD/SE) asynchronous/synchronous
- Compatability: 80 GB mode (Read/Write), 160 GB compression
(Read/Write)
- Attributes provided: One 80/160 GB internal tape drive
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal 16-bit address
- For 7044-270: (#6120)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3 or later, AIX 5.1 or later, AIX 5.2 or
later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6134) 60/150 GB 16-bit 8mm Internal Tape Drive
(No Longer Available as of March 31, 2005)
The 60/150GB 16-bit 8mm Internal Tape Drive consists of a 5.25-inch
half-high, 16-bit tape drive. This drive provides a high capacity tape
drive for save/restore and archiving functions. This tape drive uses IBM
8mm data cartridges and is compression capable, providing a capacity of
up to 150 GB -- up to 375% increase over the previous 20/40GB 8mm
internal tape drive.
Characteristics:
- Capacity: 60 GB Native Mode, 150 GB (typical) Compression Mode
- Form Factor: 5.25-inch Half-high
- Media: IBM 8mm Data Cartridge with Smart Clean Technology
- Technology: Helical Scan, Rotating Head
- Operation: Streaming
- Data Transfer Rate: 12 MB/Sec. Native Mode, 30 MB/Sec. (typical)
Compression M
- Interface: SCSI-2 16-bit Low Voltage Differential(LVD) /
Single-ended (SE) Asynchronous/Synchronous
- Compatibility: See the following Technical Support Web page (8mm
Tape Interchange Information section) for compatability information:
- http://techsupport.services.ibm.com/server/mdownload/tapewhdr.html
- Attributes provided: 60/150GB 16-bit 8mm Internal Tape Drive
- Attributes required: One 1.6-inch(41mm) half-high media bay and one
SCSI-2 internal 16-bit address
- For 7044-270: (#6134)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later, AIX 5.1 or later, AIX 5.2 or
later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6154) 20/40GB 16-bit 8mm Internal Tape Drive (White Bezel)
(No Longer Available as of December 6, 2002)
This feature consists of a 5.25-inch half-high, single-ended, 16-bit
tape drive. This drive provides a high capacity tape drive for
save/restore and archiving functions. This tape drive uses IBM 8mm data
cartridges and is compression capable, providing a capacity of up to 40
GB -- a 400% increase over the previous 5/10 GB 8mm internal tape drive.
(White bezel)
Characteristics:
- Capacity: 20.0 GB Native Mode, 40.0 GB (typical) Compression Mode
- Form Factor: 5.25-inch Half-high
- Media: IBM 8mm Data Cartridge
- Technology: Helical Scan, Rotating Head
- Operation: Streaming
- Data Transfer Rate: 3MB/Sec. Native Mode, 6MB/Sec. (typical)
Compression M
- Interface: SCSI-2 16-bit (Single-ended) Asynchronous/Synchronous
- Compatibility: 2.3 GB Mode (Read only), 2.3 GB mode with Compression
(Read only), 5 GB Mode (Read only), 5 GB Compression (Read only), 7 GB
Mode (Read only), 7 GB Compression (Read only), 20 GB Mode (R/W), 20 GB
Compression (R/W).
- Attributes provided: 8mm tape capability
- Attributes required: One 1.6-inch(41mm) half-high media bay and one
SCSI-2 internal SE 16-bit address
- For 7044-270: (#6154)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#6156) 20/40GB 16-bit 8mm Internal Tape Drive (Black Bezel)
(No Longer Available as of December 6, 2002)
This feature consists of a 5.25-inch half-high, single-ended, 16-bit
tape drive. This drive provides a high capacity tape drive for
save/restore and archiving functions. This tape drive uses IBM 8mm data
cartridges and is compression capable, providing a capacity of up to 40
GB -- a 400% increase over the previous 5/10 GB 8mm internal tape drive.
(Black bezel)
Characteristics:
- Capacity: 20.0 GB Native Mode, 40.0 GB (typical) Compression Mode
- Form Factor: 5.25-inch Half-high
- Media: IBM 8mm Data Cartridge
- Technology: Helical Scan, Rotating Head
- Operation: Streaming
- Data Transfer Rate: 3MB/Sec. Native Mode, 6MB/Sec. (typical)
Compression M
- Interface: SCSI-2 16-bit (Single-ended) Asynchronous/Synchronous
- Compatibility: 2.3 GB Mode (Read only), 2.3 GB mode with Compression
(Read only), 5 GB Mode (Read only), 5 GB Compression (Read only), 7 GB
Mode (Read only), 7 GB Compression (Read only), 20 GB Mode (R/W), 20 GB
Compression (R/W).
- Attributes provided: 8mm tape capability
- Attributes required: One 1.6-inch(41mm) half-high media bay and one
SCSI-2 internal SE 16-bit address
- For 7044-270: (#6156)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#6158) 20/40GB 4mm Internal Tape Drive
(No Longer Available as of May 31, 2006)
The 20/40 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high,
single-ended 16-bit tape drive, which provides a high capacity for
save/restore and achieve functions. This tape drive uses IBM 4-mm data
cartridges and is compression capable, providing a capacity of up to 40
GB - a significant increase in capacity over the previous 12/24 4-mm
internal tape drives (when using DDS-4 media).
Characteristics
- Capacity: 20 GB native mode, 40 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: IBM 4-mm DDS-4 data cartridge
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression
- Interface: SCSI-2 (single ended) asynchronous/synchronous
- Compatability: 4 GB mode (Read Only), 8 GB compression (Read Only);
12 GB mode(Read/Write), 24 GB compression (Read/Write), 20 GB mode
(Read/Write), 40 GB compression (Read/Write).
Note: MES orders are shipped with both a black and a white bezel.
- Attributes provided: 4mm tape capability
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal SE 16-bit address
- For 7044-270: (#6158)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#6159) 12/24GB 4mm Internal Tape Drive
(No Longer Available as of April 26, 2002)
The 12/24 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high,
single-ended 8-bit tape drive, which provides a high capacity for
save/restore and achieve functions. This tape drive uses IBM 4-mm data
cartridges and is compression capable, providing a capacity of up to 24
GB - a significant increase in capacity over the previous 4/8 4-mm
internal tape drives (when using DDS-3 media).
Characteristics
- Capacity: 12 GB native mode, 24 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: IBM 4-mm DDS-3 data cartridge
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 1.1 MBps native mode, 2.2 MBps (typical)
compression
- Interface: SCSI-2 (single ended) asynchronous/synchronous
- Compatibility: 2 GB mode (Read/Write), 4 GB compression
(Read/Write); 4 GB mode (Read/Write), 8 GB compression (Read/Write); 12
GB mode (Read/Write), 24 GB compression (Read/Write)
Note: MES orders are shipped with both a black and a white bezel.
- Attributes provided: 4mm tape capability
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal SE 8-bit address
- For 7044-270: (#6159)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#6203) - PCI Dual Channel Ultra3 SCSI Adapter
(No Longer Available as of December 10, 2004)
The PCI Dual Channel Ultra3 SCSI Adapter (#6203) is a 64 bit adapter
and is an excellent solution for high performance SCSI applications. The
PCI Dual Channel Ultra3 SCSI Adapter provides 2 SCSI channels (busses).
Each SCSI bus can either be internal (on systems that support internal
SCSI device or backplane attachments) or external and will support a data
rate of up to 160 MBytes per second, up to twice the maximum data
transfer rate of the previous Dual Channel Ultra2 SCSI adapter (80 MBytes
per second).
In order to achieve an Ultra3 SCSI bus data rate of up to 160 MBytes
per second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this Ultra3 160 MBytes per second performance, all attaching
devices or subsystems should also be Ultra3 LVD devices. But, if Ultra2
and Ultra3 devices coexist on the same bus, each device will operate at
its rated speed. For lower speed single-ended (SE) devices, the SCSI bus
will switch to single-ended (SE) performance and interface at the lower
SE bus data rate of the device.
Two industry-standard VHDCI 68 pin connectors are mounted on the
adapter's end bracket, allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68
pin, (#2118) can be used with older external SE subsystems to allow
connection to the VHDCI connector on the PCI Dual Channel Ultra3 SCSI
Adapter.
Note: If any Single Ended (SE) SCSI subsystem is attached to an external
port of this adapter, the SCSI port will auto-throttle to a "Fast"
interface speed running no faster than 20MB/s max. This auto-throttle
function is performed to ensure best signal quality between host adapter
and attaching subsystem. The second external port is unaffected unless a
SE subsystem is also attached to it. If so, it would also auto-throttle
as described above.
The PCI Dual Channel Ultra3 SCSI Adapter (#6203) also is a native boot
adapter with AIX 4.3.3 or AIX 5.1 (with appropriate updates) in the
supported pSeries or RS/6000 systems.
- Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices
- Attributes required: One available PCI slot
- For 7044-270: (#6203)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-14 or
later, AIX 5.1 with Update CD LCD4-1103-01 or later
- Initial Order/MES/Both/Supported: Both
(#6204) PCI Universal Differential Ultra SCSI Adapter
(No Longer Available as of December 30, 2005)
The PCI Universal Differential Ultra SCSI Adapter is the latest
technology advancement of an RS/6000 SCSI-2 differential adapter with a
maximum data transfer rates of 40 MBytes per second. This adapter has
the capability to be plugged into the newer +3.3 volt PCI slots as well
as the older +5 volt PCI slots. Feature code # 6204 allows connection to
external differential SCSI-2 F/W or Ultra SCSI type devices up to 25
meters away. Feature code # 6204 will negotiate with each external
device and transfer data at the fastest SCSI data transfer rate capable
by the external device. Check system sales pages as to which external
differential subsystems are supported.
The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra)
documentation. Industry standard 68 pin connectors are incorporated
(SCSI "P" connector definition of X3T9.2/90-048).
- Attributes provided: 15 external SCSI-2 addresses
- Attributes required: 1 PCI slot.
- For 7044-270: (#6204)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#6205) PCI Dual Channel Ultra2 SCSI Adapter
(No Longer Available as of December 3, 2001)
The PCI Dual Channel Ultra2 SCSI Adapter (#6205) is a 64 bit adapter
and is an excellent solution for high performance SCSI applications. The
PCI Dual Channel Ultra2 SCSI Adapter provides 2 SCSI channels (busses).
Each SCSI bus can either be internal or external and will support a data
rate of up to 80 MBytes per second, up to twice the maximum data transfer
rate of previous Ultra SCSI adapters (40 MBytes per second).
In order to achieve an Ultra2 SCSI bus data rate of up to 80 MBytes
per second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. In order
to utilize this Ultra2 80 MBytes per second performance, all attaching
devices or subsystems must also be Ultra2 LVD devices. If any device is
not Ultra2 LVD, the adapter will switch its SCSI bus to single-ended (SE)
performance and interface at the lower SE SCSI bus data rate of the
device.
Two industry standard VHDCI 68 pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68
pin, (#2118) can be used with older external SE subsystems to allow
connection to the VHDCI connector on the PCI Dual Channel Ultra2 SCSI
Adapter.
Note: If any Single Ended (SE) SCSI subsystem is attached to an external
port of this adapter, the SCSI ports (both the external port being
attached to and its associated or shared internal port) will auto-
throttle to a "Fast" interface speed running no faster than 20MB/s max.
This auto-throttle function is performed to ensure best signal quality
between host adapter and attaching subsystem. The second external port
and its associated or shared internal port is unaffected unless a SE
subystem is also attached to it. If so, it would also auto-throttle as
described above.
Any supported RS/6000 system can be set up to boot from PCI Dual
Channel Ultra2 SCSI Adapter (#6205). If you are running with AIX 4.3.3
or later software, this adapter has native boot support as part of that
level of AIX software. If you are running with 4.2.1 software, the below
procedure applies in order to boot using the PCI Dual Channel Ultra2 SCSI
Adapter:
- The designated boot SCSI disk can be located under the covers of a
processor unit or in an external SCSI storage unit.
- AIX version 4.2.1 must be loaded to the designated SCSI boot disk
using AIX's Network Install Manager (NIM) before booting from
the SCSI boot disk.
- The system with a designated SCSI boot disk must have a network
connection with another RS/6000 system performing the NIM Master function
to perform the install. On RS/6000 SP systems, a similar network install
is performed from a control workstation.
- Once AIX with updates is installed on the designated SCSI boot disk
and the system is configured for booting, booting will take place from
the boot disk drive without any support from the control processor or NIM
Master and the system does not have to be connected to the network at
boot time.
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One available PCI slot
- For 7044-270: (#6205)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#6206) PCI Single-Ended Ultra SCSI Adapter
(No Longer Available as of December 10, 2004)
The PCI Single-Ended Ultra SCSI Adapter (#6206) is an ideal solution
for applications requiring large block data transfers (more than 64K
block size) in a multi disk drive environment utilizing SCSI-2 protocol.
FC #6206 has a maximum data transfer rate of 40 MBytes per second which
is twice the maximum data transfer rate of SCSI-2 Fast/Wide adapters (20
MBytes per second).
The PCI Single-Ended Ultra SCSI Adapter (#6206) conforms to the SCSI-2
standard and Fast-20 (Ultra) documentation. Industry standard 68 pin
connectors are incorporated (SCSI "P" connector definition of
X3T9.2/90-048).
Note: If any Single Ended (SE) SCSI subsystem is attached to the
external port of this adapter, the SCSI ports (both external and
internal) will auto-throttle to a "Fast" interface speed running no
faster than 20MB/s max. This auto-throttle function is performed to
ensure best signal quality between host adapter and attaching subsystem.
Limitation: Attachment of the IBM 2104 models DL1, TL1, DU3, or TU3
external disk subsystems to the external connector of this SCSI adapter
is not supported when any device(s) are attached to the internal
connector of the same adapter.
- Attributes provided: 15 internal or 15 external SCSI-2 addresses
- Attributes required: 1 PCI slot.
- For 7044-270: (#6206)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#6227) Gigabit Fibre Channel Adapter for PCI Bus
(No Longer Available as of December 3, 2001)
The RS/6000 Gigabit Fibre Channel Adapter for PCI Bus provides a
single or dual initiator capability over an optical fiber link or loop
running up to 100MB/s. With the use of optical fiber cabling, this
adapter provides the capability for a network of high speed local and
remote located storage. Distances of up to 500 meters are supported.
When used with the IBM Fibre Channel Storage Hub, distances of up to 10
kilometers are supported. The RS/6000 Gigabit Fibre Channel for PCI Bus
can be used to attach devices either directly, or by means of Fibre
Channel Switches.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 FCAL interface
- Attributes required: 1 empty PCI slot
- For 7044-270: (#6227)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 with 4330-05 Recommended Maintenance
Package
- Initial Order/MES/Both/Supported: Both
Fibre Channel boot capability is supported on this system with this
adapter provided your system firmware and adapter firmware are at the
proper support levels. Systems manufactured prior to November 30, 2001
may require a system and adapter firmware update. Check the following
web URL to review and download latest firmware if needed.
- http://www.austin.ibm.com/support/micro
Note: Fibre Channel boot also requires AIX 4.3.3 or AIX 5.1 at the
September, 2001 maintenance level or later along with a disk subsystem on
which this boot capability has been qualified.
(#6228) Gigabit Fibre Channel Adapter for 64-bit PCI Bus
(No Longer Available as of December 10, 2004)
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus is a 64-bit
address/data, short form factor PCI adapter with LC type external fiber
connectors that provides single or dual initiator capability over an
optical fiber link or loop. With the use of appropriate optical fiber
cabling, this adapter provides the capability for a network of high speed
local and remote located storage. The 2 Gigabit Fibre Channel Adapter
for 64-bit PCI Bus will auto-negotiate for the highest data rate (either
1Gps or 2Gps) of which the device or switch is capable. Distances of up
to 500 meters running at 1Gbps data rate and up to 300 meters running at
2Gbps data rate are supported between the adapter and an attaching device
or switch. When used with IBM supported Fibre Channel storage switches
supporting long-wave optics, distances of up to 10 kilometers are capable
running at either 1Gps or 2Gps data rates.
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus can be used to
attach devices either directly, or by means of Fibre Channel Switches.
If attaching a device or switch with a SC type fiber connector(s), use of
an LC-SC Fibre Channel Conversion Cable (#2456) is required.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
- http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 FC/FC-AL interface
- Attributes required: 1 empty PCI slot
- For 7044-270: (#6228)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-12 or
higher, or APAR IY20367 from FIXDIST at the following URL:
http://techsupport.services.ibm.com/rs6k/fixes.html, AIX 5.1 or later.
- Initial Order/MES/Both/Supported: MES
Fibre Channel boot capability is supported on this system with this
adapter provided your system firmware and adapter firmware are at the
proper support levels. Systems manufactured prior to November 30, 2001
may require a system and adapter firmware update. Check the following
web URL to review and download latest firmware if needed.
- http://www.austin.ibm.com/support/micro
Note: Fibre Channel boot also requires AIX 4.3.3 or AIX 5.1 at the
September, 2001 maintenance level or later along with a disk subsystem on
which this boot capability has been qualified.
(#6230) Advanced SerialRAID Plus Adapter
(No Longer Available as of June 24, 2005)
The Advanced SerialRAID Plus Adapter (#6230) is a 4 port (2 loop)
Serial Storage Architecture (SSA) adapter providing an instantaneous data
transfer rate of up to 160 MByte/s per loop. It also provides eight-
initiator, non-RAID capability, two-initiator RAID 0 + 1, two-initiator
RAID 5, or one-initiator RAID 0 capability. The adapter accepts a 32
MByte Fast-Write Cache Option Card (#6235) that improves write
performance in RAID 0+1, RAID 5, and non-RAID applications. When the 32
MByte Fast-Write Cache Option Card is used, the adapter can be configured
in either single or dual initiator fast-write cache mode. In dual
initiator fast-write cache mode, if one of the two adapters fail, the
failing adapter transfers control over to the other. Also, in dual
initiator Fast Write Cache mode, the 128 MByte DRAM Option Card (#6231)
is available and required to utilize the full 32 MBytes of fast-write
cache on the adapters. If the 128 MByte DRAM Option Card is not used in
dual initiator fast-write cache mode, the effective fast-write cache
capacity will be 16 MBytes on each adapter. See the 128 MByte DRAM
Option Card (#6231) for information.
The Advanced SerialRAID Plus Adapter when operated in a RAID 5
configuration will support (2+P) to (15+P) arrays and up to 6 (15+P)
arrays. The adapter also supports Hot Spares in RAID 5 mode. The
Advanced SerialRAID Plus Adapter also supports connectivity to external
disk enclosures and internal RS/6000 SSA configurations. Optional SSA
Fiber-Optic Extender is also supported (Refer to IBM 7133 Sales
literature for additional information)
Any supported RS/6000 system can be set up to boot from an Advanced
SerialRAID Plus Adapter (#6230), provided a non-RAID SSA disk is included
as part of the configuration. Other disks associated with the adapter
can be RAID but at least one disk must be a non-RAID SSA disk. The
non-RAID SSA disk can be located under the covers of a processor unit or
in an external SSA storage unit. If your system is running with AIX
4.3.3 or later software, native boot capability is supported. For
factory system orders with AIX preload requested, an internal SCSI disk
drive will be preloaded as the native boot disk even if internal SSA disk
drive(s) are present. If your system is running with AIX 4.2.1 or AIX
4.3.2 software, the below procedure applies in order to boot using the
Advanced SerialRAID Plus Adapter:
- The non-RAID SSA disk can be located under the covers of a processor
unit or in an external SSA storage unit.
- A supported AIX version of software (with proper updates) must be
loaded to the non-RAID SSA disk using AIX's Network Install Manager
(NIM) before booting from the non-RAID disk.
- The system with a non-RAID SSA disk must have a network connection
with another RS/6000 system performing the NIM Master function to perform
the install. On RS/6000 SP systems, a similar network install is
performed from a control workstation.
- Once AIX with updates is installed on the non-RAID SSA disk and the
system is configured for booting, booting will take place from the boot
disk without any support from the control processor or NIM Master and the
system does not have to be connected to the network at boot time.
A 3-Way Copy Function is available. This 3-Way Copy Function allows a
user to create a third copy to an existing RAID-1 or RAID 0+1 array while
mirrored operation continues 3-Way Copy allows the user, at any time
after the copy process has completed, to split the third copy off from
the original RAID-1 or RAID 0+1 array to form an independent RAID copy.
This third copy or "snapshot" copy could be typically used to perform a
backup or to test some new application. The 3-Way Copy Function is
available only via a code download and can only be gained by going to the
SSA web support pages defined below.
When performing SSA device or subsystem planning, installation,
upgrades, or preventive maintenance, refer to the following Web support
pages. They provide access to the latest SSA publications and support
code for the system, SSA adapters, and SSA subsystems. These sites
should also be considered during system hardware and/or operating system
upgrades if SSA devices are included in the system.
http://www.storage.ibm.com/hardsoft/products/ssa/
The above link contains links to SSA publications and other SSA Web
sites, including the one below.
http://www.storage.ibm.com/hardsoft/products/ssa/rs6k/index.html
The above link contains lists of the latest SSA support code and
provides code download capability for the RS/6000 and AIX environments.
LIMITATION: Internal ports on the adapter are not supported. See
machine/model specific information to determine if internal SSA disk
drives and associated hardware/cables are supported.
- Attributes provided: Attachment of SSA devices
- Attributes required: One PCI bus slot
- For 7044-270: (#6230)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#6231) 128 MByte DRAM Option Card
(No Longer Available as of June 24, 2005)
The 128 MByte DRAM Option Card (#6231) is a field only optional
feature to the Advanced SerialRAID Adapter (#6225) or a factory or field
option for the Advanced SerialRAID Plus Adapter (#6230). This option is
recommended for dual initiator fail-over Fast Write Cache (FWC)
configurations. The option increases the existing DRAM on the adapter to
128 MBytes. In this type of dual initiator FWC configuration, the
existing DRAM does not have enough capacity to completely contain a copy
of each adapter's 32 MByte FWC and also provide additional working space.
The 128 MByte DRAM Option Card provides this additional space needed to
contain a full copy of each adapters 32 MByte FWC content and allows for
full 32 MByte fail-over protection. If the 128 MByte DRAM Option Card
(#6231) is not used with dual-initiator FWC configurations, the effective
FWC capacity is reduced to 16 MBytes per adapter.
If this feature is ordered as a field upgrade to an existing
SerialRAID adapter (#6225 or 6230), a CD-ROM with appropriate software
and publications are also provided.
(#6235) 32 MByte Fast-Write Cache Option Card
(No Longer Available as of June 24, 2005)
The 32 MByte Fast-Write Cache Option Card (#6235) is a 32 MByte fast-
write optional feature that plugs into the IBM RS/6000 Advanced
SerialRAID Adapter (#6225) or the Advanced SerialRAID Adapter Plus
(#6230). It utilizes non-volatile RAM. During the unlikely event of an
Advanced SerialRAID Adapter failure, a replacement Advanced SerialRAID
Adapter can be installed and the fast-write cache can be removed from the
failing adapter and installed in the new adapter insuring data integrity.
The 32 MByte Fast-Write Cache Option Card can provide a significant
improvement of data throughput and response time during certain sequence
write operations compared to SSA RAID adapters without the fast-write
cache. The response time and data transfer improvement using the
optional card will vary depending upon the data block sizes, the
percentage of sequential writes, machine type/model, and application
parameters. The 32 MByte Fast-Write Cache Option Card plugged into the
Advanced SerialRAID Adapter (# 6225) will operate in either non-RAID or
RAID 5 mode, in single-initiator configurations. The 32 MByte Fast-Write
Cache Option Card plugged into the Advanced SerialRAID Plus Adapter (#
6230) will operate in non-RAID, RAID 5, or RAID 0+1 mode, in single-
initiator or dual initiator configurations.
(#6239) 2 Gigabit Fibre Channel PCI-X Adapter
(No Longer Available as of December 30, 2005)
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data,
short form factor PCI-X adapter with an LC type external fiber connector
that provides single or dual initiator capability over an optical fiber
link or loop. With the use of appropriate optical fiber cabling, this
adapter provides the capability for a network of high speed local and
remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will
auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of
which the device or switch is capable. Distances of up to 500 meters
running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data
rate are supported between the adapter and an attaching device or switch.
When used with IBM supported Fibre Channel storage switches supporting
long-wave optics, distances of up to 10 kilometers are capable running at
either 1 Gbps or 2 Gbps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach
devices either directly, or by means of Fibre Channel Switches. If
attaching a device or switch with a SC type fiber onnector(s), use of an
LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 Fibre Channel/FC-AL interface
- Attributes required: 1 empty PCI or PCI-X slot
- For 7044-270: (#6239)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.1 or later, AIX 5.2 or later
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
Note: Fibre Channel boot capability is supported on this system with this
adapter provided your system firmware is at the proper support level.
Systems manufactured prior to November 30, 2001, may require a system
firmware update. Check the following Web URL to review and download
latest firmware if needed.
- http://www.austin.ibm.com/support/micro/
Note: Fibre Channel boot requires AIX 5.1 at the September, 2001,
maintenance level or later along with a disk subsystem on which this boot
capability has been qualified.
(#6310) IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
(No Longer Available as of June 25, 2004)
Provides voice processing for up to four T1 or E1 digital trunks,
providing connectivity for 96 (T1) or 120 (E1) voice channels in a single
PCI slot. The voice processing function is provided by Voice Response
for AIX LPP. Several network attachment cables are available in support
of this adapter and the correct cable should be selected for either T1 or
E1networks. (Select from cable features: 2709 (T1,RJ-45), 2710 (E1,
RJ-45), 2871/2872 (T1, 100 ohm), 2873/2874 (E1, 120 ohm).
Note: When more than one IBM ARTIC960RxD Quad Digital Trunk PCI
Adapter (#6310) is ordered, the Artic960RxD Quad DTA, H.100, 4-drop Cable
(#2877) is required.
Note: When a Digital Trunk Quad PCI adapter (#6309) is already
present and an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is
ordered, an IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable (#2878) and
IBM ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter Cable (#2879)
are required.
Note: When an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310)
is ordered and an IBM ARTIC960RxD DSP Resource PCI Adapter (#2949) is
already present, the IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable
(#2878) and the IBM ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter
Cable (#2879) are required.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:
- http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: Connection of 1 to 4 T1/E1 Trunks
- Attributes required: Available PCI slot, appropriate cables and
WebSphere Voice Response for AIX LPP application software.
- For 7044-270: (#6310)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#6311) IBM ARTIC960RxF PCI Adapter for RS/6000
(No Longer Available as of June 28, 2002)
The IBM ARTIC960RxF Digital Trunk Resource PCI Adapter (DTRA) is a
single slot, long, 32-bit PCI adapter. This adapter is designed to be
used in conjunction with the IBM ARTIC960RxD Quad Digital Trunk PCI
Adapter (DTQA)(#6310) and provides additional DSP resources so that voice
recognition channels can be supported. These two adapters are designed
to be used with the IBM Voice Response for AIX Version 2.2. application
but the user may program them to be used for his unique application.
Voice Response for AIX Version 2.2 is an interactive voice response
system (IVR) for the AIX operation system with selected IBM RS/6000
systems. Callers can access a wide range of enterprise applications and
data using the telephone key pad in response to scripted prompts from the
Voice Response IVR. It also provides the base for voice recognition
systems enabling a caller to interact using voice instead of buttons on
the telephone key pad.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements:
- http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: A single long PCI card
- Attributes required: A concurrent order or pre-existing ARTIC960RxD
Quad Digital Trunk PCI Adapter (#6310) and either an H-100 Bus 4-position
Cable (#2877) if total of FC (#6310) and FC (#6311) is less than or equal
to 4 or H-100 Bus 8-position Cable (#4353) if total of FC (#6310) and FC
(#6311) is more than 4. Two or more adjacent 32-bit or 64-bit PCI bus
slots.
- For 7044-270: (#6311)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#6505) Carrier for Ultra-SCSI 16-bit Disk
(No Longer Available as of July 31, 2001)
This feature provides a carrier for installing 16-bit SCSI drives in a
backplane. This is required for any disk not available as a feature on
this system.
The following IBM disk drives have been tested with this feature.
- 4.5GB Ultra-SCSI 16-bit Disk Drive
- 9.1GB Ultra-SCSI 16-bit Disk Drive
- 18.2GB Ultra-SCSI 16-bit Disk Drive
Using an untested disk drive could result in any of the following:
- Unpredicted SCSI errors
- Possible system hangs
- System damage (devices, backplane or adapter)
- Attributes provided: Disk enclosure
- Attributes required: Any available SCSI bay
- For 7044-270: (#6505)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
(#6508) Media Bay Disk Drive Mounting Kit
(No Longer Available as of June 25, 2004)
This feature provides the hardware for mounting any valid internal
half high disk in an available media bay.
- Attributes provided: Mounting of a valid disk drive in a media bay
- Attributes required: 1 media drive bay
- For 7044-270: (#6508)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6600) Quiet Touch Keyboard, US English, #103P
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6600)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6601) Quiet Touch Keyboard, French, #189
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6601)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6602) Quiet Touch Keyboard, Italian, #142
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6602)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6603) Quiet Touch Keyboard, German/Austrian, #129
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6603)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6604) Quiet Touch Keyboard, UK English, #166
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6604)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6605) Quiet Touch Keyboard, Spanish, #172
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6605)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6606) Quiet Touch Keyboard, Japanese, #194
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6606)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6609) Quiet Touch Keyboard, Belgian/French, #120
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6609)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6610) Quiet Touch Keyboard, Belgian/UK-Flemish, #120
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6610)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6611) Quiet Touch Keyboard, Swedish/Finnish, #153
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6611)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6612) Quiet Touch Keyboard, Danish, #159
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6612)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6614) Quiet Touch Keyboard, Swiss,French/German, #150f/g
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6614)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6616) Quiet Touch Keyboard, Norwegian, #155
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6616)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6619) Quiet Touch Keyboard, Greek, #319
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6619)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6620) Quiet Touch Keyboard, Hebrew, #212
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6620)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6629) Quiet Touch Keyboard, LA Spanish, #171
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6629)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6630) Quiet Touch Keyboard, Arabic, #238
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6630)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6633) Quiet Touch Keyboard, Korean, #413
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6633)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6634) Quiet Touch Keyboard, Chinese/US, #467
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6634)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6638) Quiet Touch Keyboard, Russian, #443
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6638)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#6640) Quiet Touch Keyboard, US English ISO9995, #103P
(For IBM, No Longer Available as of March 26, 2004)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, pearl white color, standard 6-pin
mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#6640)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#7305) AAP Software Pre-Install Indicator
Software pre-install indicator for Authorized Assemblers
- Attributes provided: Software Preinstall
- Attributes required: Authorized Assembler Order
- For 7044-270: (#7305)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter
(No Longer Available as of June 23, 2006)
This cable provides attachment between the 128-port Asynchronous
Controller and the first RAN in a daisy chain, or attachment between RANs
in the daisy chain.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 7044-270: (#8131)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
(No Longer Available as of June 23, 2006)
This cable may be substituted for the 4.5 meter (15 foot) async
controller cable whenever a customer configuration requires stacked
Remote Async Nodes.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 7044-270: (#8132)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8133) RJ-45 to DB-25 Converter Cable
(No Longer Available as of November 26, 2010)
This cable can be used to attach EIA-232 devices to the 16 port EIA
232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async
subsystem. This cable provides a 25-pin D shell connector for device
attachment. Four cables are provided per each order.
- Attributes provided: 4 DB-25 EIA-232 ports
- Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)
- For 7044-270: (#8133)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8135) 64-Port to 128-Port Pin-Out Converter
(No Longer Available as of July 31, 2001)
The 64-Port to 128-Port Pin-out Converter allows devices currently s
using 16-Port Concentrators (FC 6401 - from 64-port Async Subsystem) to
attach to 16-Port RANs (FC 8130/8134/8136). Quantity (4) per order.
- Attributes provided: 4 RJ-45 EIA-232 ports
- Attributes required: 4 device cables using 64-port RJ45 wiring.
- For 7044-270: (#8135)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232
(No Longer Available as of March 31, 2006)
Provides remote connection of up to 16 EIA-232 devices to a 128-Port
Asynchronous Controller.
Each port can be individually programmed to provide a asynchronous
connection of 230 Kbaud, but a limited number of ports in a maximum
configuration (128 ports) can be supported at this baud rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of up to 31
meters (100 feet), depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps)
from host using standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One 128-port adapter per eight (#8137s)
- For 7044-270: (#8137)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8138) Enhanced Remote Asynchronous Node 16-Port RS-422
(No Longer Available as of July 31, 2001)
Provides remote connection of up to 16 RS-422 devices to a 128-Port
Asynchronous Controller.
Each port can be individually programmed to provide a asynchronous
connection of 230 Kbaud, but a limited number of ports in a maximum
configuration (128 ports) can be supported at this baud rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Supports the following interface signals: +TxD, +RxD, -TxD, -RxD.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum RS-422 distance of up to 1200
meters (3930 feet), depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps)
from host using standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One (#2944) per eight (#8138s)
- For 7044-270: (#8138)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8422) Spaceball 3D Input Device
(No Longer Available as of December 30, 2006)
Spaceball is a 3D input device that allows a customer to view a
computer-generated model from many angles. By applying fingertip control
to push, pull, and twist the ball, you manipulate the image on the
screen. Spaceball facilitates zooming, panning, and rotating.
- Attributes provided: Spaceball 3D Input Device
- Attributes required: S1 or S2 serial port
- For 7044-270: (#8422)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#8423) Magellan XT 3D Input Device
(No Longer Available as of December 30, 2006)
The Magellan XT 3D Input Device is a high-level 3D input device which
provides real-time 3D motion control for increased productivity, better
design comprehension, and early detection of design errors.
- Attributes provided: Magellan XT 3D Input Device
- Attributes required: S1 or S2 serial port
- For 7044-270: (#8423)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.3.3 or later
- Initial Order/MES/Both/Supported: Both
(#8700) Quiet Touch Keyboard - Business Black, US English, #103P
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8700)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8701) Quiet Touch Keyboard - Business Black, French, #189
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8701)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8702) Quiet Touch Keyboard - Business Black, Italian, #142
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8702)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8703) Quiet Touch Keyboard - Business Black, German/Austrian, #129
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8704) Quiet Touch Keyboard - Business Black, UK English, #166
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8705) Quiet Touch Keyboard - Business Black, Spanish, #172
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8706) Quiet Touch Keyboard - Business Black, Japanese, #194
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8706)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8707) Quiet Touch Keyboard - Business Black, Brazilian Portuguese, #275
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8708) Quiet Touch Keyboard - Business Black, Canadian French, #058
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8709) Quiet Touch Keyboard - Business Black, Belgian/French, #120
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8709)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8710) Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish, #120
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8710)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8711) Quiet Touch Keyboard - Business Black, Swedish/Finnish, #153
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8712) Quiet Touch Keyboard - Business Black, Danish, #159
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8713) Quiet Touch Keyboard - Business Black, Bulgarian, #442
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8713)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8714) Quiet Touch Keyboard - Business Black, Swiss,French/German, #150f/g
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8716) Quiet Touch Keyboard - Business Black, Norwegian, #155
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8717) Quiet Touch Keyboard - Business Black, Dutch, #143
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8717)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8718) Quiet Touch Keyboard - Business Black, Portuguese, #163
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8718)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8719) Quiet Touch Keyboard - Business Black, Greek, #319
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8720) Quiet Touch Keyboard - Business Black, Hebrew, #212
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8721) Quiet Touch Keyboard - Business Black, Hungarian, #208
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8722) Quiet Touch Keyboard - Business Black, Icelandic, #197
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, Euro
currency key, 3-meter keyboard cable, removable wrist rest, Business
Black color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8722)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8723) Quiet Touch Keyboard - Business Black, Polish, #214
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8723)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8724) Quiet Touch Keyboard - Business Black, Romanian, #446
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8724)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8725) Quiet Touch Keyboard - Business Black, Slovakian, #245
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8725)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8726) Quiet Touch Keyboard - Business Black, Czech, #243
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8726)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8727) Quiet Touch Keyboard - Business Black, Turkish, #179
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8727)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8728) Quiet Touch Keyboard - Business Black, Turkish, #440
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8728)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8729) Quiet Touch Keyboard - Business Black, LA Spanish, #171
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8729)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8730) Quiet Touch Keyboard - Business Black, Arabic, #238
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8730)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8732) Quiet Touch Keyboard - Business Black, Serbian-Cyrillic, #118
(No Longer Available as of April 26, 2002)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8732)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8733) Quiet Touch Keyboard - Business Black, Korean, #413
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8733)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8734) Quiet Touch Keyboard - Business Black, Chinese/US, #467
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8734)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8735) Quiet Touch Keyboard - Business Black, French Canadian, #445
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8735)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8736) Quiet Touch Keyboard - Business Black, Thailand, #191
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8736)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8738) Quiet Touch Keyboard - Business Black, Russian, #443
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8738)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8739) Quiet Touch Keyboard - Business Black, Croatian, #105
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8739)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#8740) Quiet Touch Keyboard - Business Black, US English ISO9995, #103P
(No Longer Available as of May 31, 2006)
- Attributes provided: Quiet and soft-touch key depression, 3-meter
keyboard cable, removable wrist rest, Business Black color, standard
6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX
operating system installed.
- For 7044-270: (#8740)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#8741) 3-Button Mouse - Business Black
(No Longer Available as of May 31, 2006)
3-button dynamic tracking pointing device, utilizes opto-mechanical
technology, resolution is 320 DPI, 3-meter cable, Business Black color,
standard 6-pin mini-DIN connection.
- Attributes provided: Mouse capability
- Attributes required: Mouse port
- For 7044-270: (#8741)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9004) Southern Hemisphere Designator for Monitors
Specifies that southern hemisphere models are required for all
monitors on the initial plant order or on MES orders.
- Attributes provided: None
- Attributes required: Monitor
- For 7044-270: (#9004)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(#9300) Language Group Specify - US English
English language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#9300)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9703) Language Group Specify - French
French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#9703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9704) Language Group Specify - German
German language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#9704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9705) Language Group Specify - Polish
Polish language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7044-270: (#9705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9707) Language Group Specify - Portuguese
Portuguese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#9707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9708) Language Group Specify - Spanish
Spanish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#9708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9711) Language Group Specify - Italian
Italian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#9711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9712) Language Group Specify - Canadian French
Canadian French language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#9712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9714) Language Group Specify - Japanese
Japanese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#9714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9715) Language Group Specify - Traditional Chinese (Taiwan)
Traditional Chinese language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#9715)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9716) Language Group Specify - Korean
Korean language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#9716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9719) Language Group Specify - Hungarian
Hungarian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7044-270: (#9719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9720) Language Group Specify - Slovakian
Slovakian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 7044-270: (#9720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9721) Language Group Specify - Russian
- Attributes provided:
- Attributes required:
- For 7044-270: (#9721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9722) Language Group Specify - Simplified Chinese (PRC)
Simplified Chinese language group for Nomenclature and Standard
publications.
- Attributes provided: None
- Attributes required: None
- For 7044-270: (#9722)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
(#9800) Power Cord Specify - United States/Canada
The following countries use the #9800 power cord to power the system
unit and/or peripheral features requiring a power cord.
- DOM U.S.
- 649 CANADA
- 832 SAUDI ARABIA
- 619 BAHAMAS
- 621 BARBADOS
- 627 BERMUDA
- 629 BOLIVIA
- 631 BRAZIL
- 661 COLOMBIA
- 663 COSTA RICA
- 681 DOMINICAN REPUBLIC
- 683 ECUADOR
- 829 EL SALVADOR
- 731 GUATEMALA
- 640 GUYANA
- 735 HONDURAS
- 759 JAMAICA
- 781 MEXICO
- 791 NETHERLANDS ANTILLES
- 811 PANAMA
- 843 SURINAM
- 859 TRINIDAD
- 871 VENEZUELA
- 760 JAPAN
- 761 JAPAN (PDS)
- 766 KOREA
- 818 PHILIPPINES
- 858 TAIWAN
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9800)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported:
(#9802) Power Cord Specify - Brazil (125V, 15A)
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9802)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#9820) Power Cord Specify - Belgium, Finland, France (250V, 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9820)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported:
(#9821) Power Cord Specify - Denmark (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9821)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported:
(#9825) Power Cord Specify - United Kingdom (250V, 13A)
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9825)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported:
(#9827) Power Cord Specify - Israel (250V, 6-16A)
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9827)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported:
(#9828) Power Cord Specify - Switzerland (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9828)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported:
(#9829) Power Cord Specify - South Africa/Pakistan (250V, 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9829)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported:
(#9830) Power Cord Specify - Italy (250V, 10A and 16A)
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9830)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported:
(#9831) Power Cord Specify - Argentina (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9831)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported:
(#9833) Power Cord Specify - Thailand (250V, 15A)
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9833)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported:
(#9834) Power Cord Specify - Uruguay (250V, 10A)
- Attributes provided: power cord
- Attributes required: None
- For 7044-270: (#9834)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported:
Not available.
Back to top
None.
Customer Replacement Parts
None.
Back to top
None.
Back to top
None.
Supplemental Media
None.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other
countries licensed exclusively through X/Open Company Limited.
© IBM Corporation 2011.
Back to top