Family 9111+02 IBM IntelliStation Power 285 Workstation
IBM United States Sales Manual
Revised: September 27, 2011.
| Type Model |
Announced |
Available |
Marketing Withdrawn |
Service Discontinued |
| 9111-285 | 2005/10/04 | 2005/10/14 |
2009/01/02 | - |
Back to top
The IBM 9111 IntelliStation POWER 285 workstation combines excellent
performance and capacity in a flexible, affordable package. When used
with the GXT4500P or GXT6500P 3D graphics accelerator, it is an
outstanding choice for high-end Mechanical Computer Aided Design (MCAD),
Computer Aided Engineering (CAE), graphic processing, and other floating-
point-intensive business and technical applications. Using 2D graphics
accelerators, it can be used for less demanding applications such as
software development.
Model Abstract 9111-285
The IBM 9111 IntelliStation POWER Model 285 workstation is available
in a 1-core or 2-core configuration using state-of-the-art, 64-bit,
copper-based POWER5+ microprocessors running at either 1.9 GHz or 2.1
GHz, all with 36 MB of L3 cache.
The base 1 GB of main memory can be expanded to 32 GB for faster
performance and exploitation of 64-bit addressing as used in large
engineering analysis or complex product design applications.
The IBM IntelliStation POWER 285 workstation contains seven bays; four
of the bays are front-accessible and hot-swap-capable DASD bays. These
four DASD bays can accommodate up to 1200 GB of disk storage. Two of the
remaining three bays are used for a DVD-ROM and a DVD-RAM, and the last
bay can contain a tape drive.
The POWER 285 workstation supports a full range of graphic
input/output devices including the USB SpaceBall Plus 3D, USB SpaceMouse
Plus and USB SpacePilot input devices, the T120 20.1-inch TFT flat panel
monitor, and other keyboard and mouse devices.
Back to top
The IBM IntelliStation POWER 285 workstation offers:
- Outstanding value for a 3D symmetric multiprocessing (SMP)
workstation
- Excellent performance for 3D CAD/CAM and petroleum visualization
applications
- Powerful analysis workstation for complex computational chemistry,
computational fluid dynamics, and structural analysis applications
- One 1-core or 2-core state-of-the-art, 64-bit POWER5+ processor
running at 1.9 or 2.1 GHz
- Up to 32 GB of memory
- Up to 1200 GB of internal disk storage
- Four hot-swap disk bays and six PCI-X slots for feature expandability
- Two slimline media bays for DVD-ROM and DVD-RAM
- One media bay for tape drive
Back to top
Integrated features include:
- Six expansion slots
- Three hot-swap 133 MHz 64-bit PCI-X slots
- Two hot-swap 66 MHz 32-bit PCI-X slots
- One hot-swap DDR 266 MHz 64-bit PCI-X slot
- Service processor
- Two 10/100/1000 Ethernet ports
- IDE controller for connection to internal optical devices
- Ultra320 SCSI controller with dual ports (internal) and optional RAID
adapter
- Two system ports and two USB ports
- Two HMC ports
- Hot-swap cooling
- Redundant cooling
The POWER 285 workstation supports a full range of graphic
input/output devices including the USB SpaceBall Plus 3D, USB SpaceMouse
Plus and USB SpacePilot input devices, the T120 20.1-inch TFT flat panel
monitor, and other keyboard and mouse devices.
Summary of standard features:
- 1-core or 2-core SMP design (one processor card)
- 1-core or 2-core 1.9 GHz with 36 MB L3 cache
- 1-core or 2-core 2.1 GHz with 36 MB L3 cache
- 1 GB of DDR-2 533 MHz ECC memory:
- Four hot-swap disk drive bays
- Three media bays:
- One DVD-ROM (optional)
- One DVD-RAM (optional)
- One tape drive (optional)
- Six hot-swap PCI-X slots:
- Three 133 MHz 64-bit PCI-X slots
- One 266 MHz 64-bit PCI-X slot
- Two 66 MHz 32-bit PCI-X slots
- One 4-pack disk drive enclosure
- One media backplane
- Integrated:
- IDE controller for connection to internal optical devices
- Dual 10/100/1000 Gb Ethernet
- Ultra320 SCSI controller with dual ports (internal) and optional RAID
adapter
- Service processor
- Hot-swap and redundant fans
- Two USB ports
- Two system ports
- Two HMC ports
- One Power Supply, 700 Watt ac
The minimum POWER 285 configuration must include a processor, a
processor entitlement, memory, power supply, hard disk, a disk drive
enclosure, a media backplane, a power cord, a 2D graphics accelerator,
and a language group specify.
The defaults, if no choice is made, are:
1-core, 1.9 GHz processor,
36 MB L3 cache (#8327)
One Processor Entitlement (#7319)
Memory 1 GB memory DIMM (#1930)
Power supply, 700 Watt AC (#5170)
Disk drive 73.4 GB hard drive (#1968)
4-pack disk drive enclosure (#6574)
Media backplane (#7877)
2D graphics accelerator (#1980)
Language group specify (#9300 or 97xx)
Power Cord (#6470 to #6478,
#6487, #6488,
#6493 to #6496,
#6651, #6659,
#6670, #6680,
#6687)
IBM IntelliStation POWER 285 Express product offerings
Express Product Offerings are available only as initial order.
If you order an IntelliStation POWER 285 workstation with a 1-core
(#8327) or 2-core (#8330) POWER5+ 1.9 GHz processor or a 1-core (#5326)
or 2-core (#5327) POWER5+ 2.1 GHz processor with a minimum configuration,
you qualify for an Express Product Offering giving you a processor
entitlement at no extra charge. The number of processors, total memory,
quantity/size of disk, presence of a media device, monitor, keyboard,
mouse, and audio adapter are the only features that determine if a
customer is entitled to a processor entitlement at no additional charge.
You will be entitled to a lower priced AIX operating system license or
may choose to purchase the system with no operating system. The lower
priced AIX operating system is processed via a feature number on AIX.
You can make changes to the standard features as needed and still
qualify for processor entitlements at no additional charge, and the lower
priced AIX operating system license. However, selection of total memory
or DASD smaller than the total defined as the minimums disqualifies the
order as an Express Product Offering.
- Express Offering 190W for 1-core processor:
(No Longer Available as of February 12, 2007)
- 1 x 1-core 1.9 GHz processor card (#8327)
- 2 x 1024 MB (2 x 512 MB) DIMMs (#1930)
- 1 x 73.4 GB 10,000 rpm disk drive (#1968)
- 1 x Power supply, 700 watt (#5170)
- 1 x DVD-ROM (#1994)
- 1 x Media backplane (#7877)
- 1 x 4-pack disk drive enclosure (#6574)
- 1 x GXT4500p graphics accelerator (#2842)
- 1 x T119 Flat Panel Monitor (#3644)
- 1 x Quiet Touch Keyboard - USB (#88xx)
- 1 x 3-Button Optical Mouse - USB (#8841)
- 1 x Language group specify (#9300 or 97xx)
- 1 x Power cord
Note: Receive one processor entitlement (#8409) at no additional charge.
One processor is entitled.
- Express Offering 290W for 2-core processor:
(No Longer Available as of February 12, 2007)
- 1 x 2-core 1.9 GHz processor card (#8330)
- 4 x 1024 MB (2 x 512 MB) DIMMs (#1930)
- 2 x 73.4 GB 10,000 rpm disk drive (#1968)
- 1 x Power supply, 700 watt (#5170)
- 1 x DVD-ROM (#1994)
- 1 x Media backplane (#7877)
- 1 x 4-pack disk drive enclosure (#6574)
- 1 x GXT4500p graphics accelerator (#2842)
- 1 x T119 Flat Panel Monitor (#3644)
- 1 x Quiet Touch Keyboard - USB (#88xx)
- 1 x 3-Button Optical Mouse - USB (#8841)
- 1 x Language group specify (#9300 or 97xx)
- 1 x Power cord
- 1 x Processor Entitlement (#7320)
Note: Receive one processor entitlement (#8410) at no additional charge.
Two processors are entitled.
- Express Offering for 1-core, 2.1 GHz processor:
- 1 x 1-core 2.1 GHz processor card (#5326)
- 2 x 1024 MB (2 x 512 MB) DIMMs (#1930)
- 1 x 73.4 GB 15,000 rpm disk drive (#1971)
- 1 x Power supply, 700 watt (#5170)
- 1 x DVD-ROM (#1994)
- 1 x Media backplane (#7877)
- 1 x 4-pack disk drive enclosure (#6574)
- 1 x GXT4500p graphics accelerator (#2842)
- 1 x T119 Flat Panel Monitor (#3644)
- 1 x Quiet Touch Keyboard - USB (#88xx)
- 1 x 3-Button Optical Mouse - USB (#8841)
- 1 x Language group specify (#9300 or 97xx)
- 1 x Power cord
Note: Receive one processor entitlement (#8402) at no additional charge.
One processor is entitled.
- Express Offering 2-core 2.1 GHz processor:
- 1 x 2-core 2.1 GHz processor card (#5327)
- 4 x 1024 MB (2 x 512 MB) DIMMs (#1930)
- 2 x 73.4 GB 15,000 rpm disk drive (#1971)
- 1 x Power supply, 700 watt (#5170)
- 1 x DVD-ROM (#1994)
- 1 x Media backplane (#7877)
- 1 x 4-pack disk drive enclosure (#6574)
- 1 x GXT4500p graphics accelerator (#2842)
- 1 x T119 Flat Panel Monitor (#3644)
- 1 x Quiet Touch Keyboard - USB (#88xx)
- 1 x 3-Button Optical Mouse - USB (#8841)
- 1 x Language group specify (#9300 or 97xx)
- 1 x Power cord
- 1 x Processor Entitlement (#7339)
Note: Receive one processor entitlement (#8403) at no additional charge.
Two processors are entitled.
Reliability, Availability, and Serviceability (RAS)
Reliability, fault tolerance, and data integrity
The reliability of the IntelliStation POWER 285 system starts with
components, devices, and subsystems that are designed to be fault
tolerant. During the design and development process, subsystems go
through rigorous verification and integration testing processes. During
system manufacturing, systems go through a thorough testing process to
help ensure the highest product quality level.
The IntelliStation POWER 285 system L3 cache and system memory offers
error checking and correcting (ECC) fault-tolerant features. ECC is
designed to correct environmentally induced, single-bit, intermittent
memory failures and single-bit hard failures. With ECC, the likelihood
of memory failures will be substantially reduced. ECC also provides
double-bit memory error detection that helps protect data integrity in
the event of a double-bit memory failure. System memory also provides
4-bit packet error detection that helps to protect data integrity in the
event of a DRAM chip failure. The system bus, I/O bus, and PCI buses are
designed with parity error detection.
Disk mirroring and disk controller duplexing capability are also
provided by the AIX operating system.
The Journaled File System maintains file system consistency and
reduces the likelihood of data loss when the system is abnormally halted
due to a power failure.
PCI extended error handling (EEH)
In the past, PCI bus parity errors caused a global machine check
interrupt, which eventually required a system reboot to continue. In the
POWER5+ systems, new I/O drawer hardware, system firmware, and AIX
interaction have been designed to allow transparent recovery of
intermittent PCI bus parity errors and graceful transition to the I/O
device available state in the case of a permanent parity error in the PCI
bus. This mechanism is called the PCI extended error handling (EEH).
EEH-enabled adapters respond to a special data packet generated from the
affected PCI slot hardware by calling system firmware, which will examine
the affected bus, allow the device driver to reset it, and continue
without a system reboot.
Memory error correction extensions
The standard memory has single-error-correct and double-error detect
ECC circuitry designed to correct single-bit memory failures. The
double-bit detection helps to maintain data integrity by detecting and
reporting multiple errors beyond what the ECC circuitry can correct. The
memory chips are organized such that the failure of any specific memory
module only affects a single bit within an ECC word (bit scattering),
allowing error correction and continued operation in the presence of a
complete chip failure (Chipkill recovery).
The memory also utilizes memory scrubbing and thresholding to
determine when spare memory modules within each bank of memory, if
available, should be used to replace ones that have exceeded their
threshold value (dynamic bit steering).
Redundancy for array self-healing
Although the most likely failure event in a processor is a soft
single-bit error in one of its caches, there are other events that can
occur, and they need to be distinguished from one another. For the L1,
L2 and L3 caches and their directories, hardware and firmware keep track
of whether permanent errors are being corrected beyond a threshold. If
exceeded, a deferred repair error log is created. Additional run-time
availability actions, such as CPU vary off or L3 cache line delete, are
also initiated.
L1 and L2 caches and L2 and L3 directories on the POWER5+ chip are
manufactured with spare bits in their arrays that can be accessed via
programmable steering logic to replace faulty bits in the respective
arrays. This is analogous to the redundant bit steering employed in main
storage as a mechanism that is designed to help avoid physical repair,
and is also implemented in POWER5+ systems. The steering logic is
activated during processor initialization and is initiated by the built-
in self-test (BIST) at power-on time.
L3 cache redundancy is implemented at the cache line granularity
level. Exceeding correctable error thresholds while running causes
invocation of a dynamic L3 cache line delete function.
Service Processor
The service processor that is standard on the POWER 285 workstation
provides the capability to diagnose, check the status of, and sense the
operational conditions of a remote system.
The service processor runs on its own power boundary and does not
require a system processor to be operational to perform its tasks.
The service processor supports surveillance of the connection to the
HMC and to the system firmware (hypervisor). It also provides several
remote power control options, environmental monitoring, reset and boot
features, and remote maintenance and diagnostic functions including
console mirroring.
The service processor can place calls to report surveillance failures,
critical environmental faults, and critical processing faults when the
system is not managed by an HMC running Service Focal Point.
Fault monitoring functions
- BIST (built-in self-test) and POST (power-on self-test) check
processor, L3 cache, memory, and associated hardware required for proper
booting of the operating system, every time the system is powered on. If
a non-critical error is detected or if the errors occur in the resources
that can be removed from the system configuration, the booting process
proceeds to completion. The errors are logged in the system nonvolatile
RAM (NVRAM).
- Disk drive fault tracking can alert the system administrator of an
impending disk failure before it impacts customer operation.
- The AIX log (where hardware and software failures are recorded and
analyzed by Error Log Analysis (ELA) routine) warns the system
administrator about the causes of system problems. The Service Processor
event log also logs unrecoverable checkstop conditions and forwards them
to the Service Focal Point if the system is HMC attached. This also
enables IBM service representatives to bring along probable replacement
hardware components when a service call is placed, thus minimizing system
repair time.
Mutual surveillance
The Service Processor monitors the operation of the firmware during
the boot process, and also monitors the Hypervisor for termination. The
Hypervisor monitors the Service Processor and will perform a reset/reload
if it detects the loss of the service processor. If the reset/reload
doesn't correct the problem with the service processor, the hypervisor
will notify the operating system and the operating system can take
appropriate action, including calling for service.
Environmental monitoring functions
- Temperature monitoring increases the fan speed rotation when ambient
temperature is above the normal operating range.
- Temperature monitoring warns the system administrator of potential
environmental related-problems (for example, air conditioning and air
circulation around the system) so that appropriate corrective actions can
be taken before a critical failure threshold is reached. It also
performs an orderly system shutdown when the operating temperature
exceeds the critical level.
- Fan speed monitoring provides a warning and an orderly system
shutdown when the speed is out of operational specification.
- Voltage monitoring provides warning and an orderly system shutdown
when the voltages are out of operational specification.
Error handling and reporting
In the unlikely event of system hardware or environmentally induced
failure, the system run-time error capture capability systematically
analyzes the hardware error signature to determine the cause of failure.
The analysis result will be stored in system NVRAM. When the system can
be successfully rebooted either manually or automatically, the error will
be reported to the AIX operating system. Error Log Analysis (ELA) can be
used to display the failure cause and the physical location of failing
hardware.
With the integrated Service Processor, the system has the ability to
automatically send out an alert via phone line to a pager or call for
service in the event of critical system failure. A hardware fault will
also turn on the two Attention Indicators (one located on the front of
the system unit and the other on the rear of the system unit) to alert
the user of an internal hardware problem. The indicator may also be
turned on by the operator as a tool to allow system identification. For
identification, the indicators will flash, whereas the indicator will be
on solid when an error condition occurs.
Availability enhancement functions
- The auto-restart (reboot) option, when enabled, can reboot the system
automatically following an unrecoverable software error, software hang,
hardware failure, or environmentally induced (ac power) failure.
Serviceability
The POWER 285 workstation is designed for customer setup of the
machine and for subsequent addition of most features (adapters/devices).
For a fee, IBM Service can perform the installation.
- The POWER 285 workstation allows customers to replace service parts
(Customer Replaceable Unit) if they desire. To accomplish this, the
POWER 285 workstation has incorporated LEDs that will indicate the parts
that need to be replaced.
- The POWER 285 workstation allows support personnel to remotely log
into a system to review error logs and perform remote maintenance. The
POWER 285 workstation Service Processor enables the analysis of a system
that will not boot.
- The diagnostics consist of Stand-alone Diagnostics, which are loaded
from the DVD-ROM drive, and Online Diagnostics.
- Online Diagnostics, when installed, are resident with the AIX
operating system on the disk or system. They can be booted in single-
user mode (service mode), run in maintenance mode, or run concurrently
(concurrent mode) with other applications. They have access to the AIX
Error Log and the AIX Configuration Data.
- Service mode allows checking of system devices and features.
- Concurrent mode allows the normal system functions to continue while
selected resources are being checked.
- Maintenance mode allows checking of most system resources.
- For results of Service Processor tests, access the error log from the
Service Processor menu.
Service Agent
The Service Agent is available at no additional charge. When
installed on an IBM eServer system, the Service Agent can enhance IBM's
ability to provide the system with maintenance service.
The Service Agent:
- Monitors and analyzes system errors, and if needed, can automatically
place a service call to IBM without customer intervention
- Can help reduce the effect of business disruptions due to unplanned
system outages and failures
- Performs problem analysis on a subset of hardware-related problems
and, with customer authorization, can report automatically the results to
IBM Service
Back to top
Model Summary Matrix
| Model |
Processor |
Clock rate |
System Memory |
Internal Storage |
Slots/Bays |
| 285 |
POWER5+ |
1.9 or 2.1 GHz |
1GB to 32GB |
36.4GB to 1200GB |
6 slots/7 bays |
Customer Setup (CSU)
Yes.
Devices Supported
The following external machine types are supported on the indicated
models for MT 9111.
This list is not all inclusive. Many devices are supported through
standard ports. Please refer to the sales manual of the external machine
type and the list of supported devices in the appropriate section of the
AIX sales manual for further attach support information.
|2| X = SUPPORTED DEVICE
|8|
|5|
| |
MT-MOD | | DESCRIPTION
---------|-|---------------------------------------------------------
---------|-|--------Communications-----------------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7036-P16 |X| 16-port EIA-232 LAN Attached Remote Asynchronous Node (RAN)
| |
---------|-|--------Disk---------------------------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1722-60U |X| TotalStorage DS4300 Midrange Disk System Model 60U
1722-6LU |X| IBM TotalStorage DS4000 Midrange Disk Systems Model 6LU
1724-100 |X| IBM 1724 TotalStorage DS4100 Midrange Disk System Model
| | 100
1740-1RU |X| TotalStorage DS4000 EXP700 Expansion Unit Model 1RU
1742-1RU |X| IBM TotalStorage FAStT700 Storage Server Model 1RU
1742-90U |X| IBM TotalStorage FAStT900 Storage Server Model 90U
2104-DS4 |X| Expandable Storage Plus Model DS4
2104-DU3 |X| Expandable Storage Plus Model DU3
2104-TS4 |X| Expandable Storage Plus Model TS4
2104-TU3 |X| Expandable Storage Plus Model TU3
2105-800 |X| IBM TotalStorage Enterprise Storage Server Model 800
2105-F10 |X| IBM Enterprise Storage Server Model F10
2105-F20 |X| IBM Enterprise Storage Server Model F20
3542-1RU |X| IBM TotalStorage 3542 FAStT200 Storage Server Model 1RU
3542-2RU |X| IBM FAST T200 Storage Server Model 2RU
3542-2RX |X| IBM FAStT200 Storage Server Model 2RU (EMEA)
3552-1RU |X| IBM Total Storage FAST T500 Storage Server Model 1RU
3552-1RX |X| IBM TotalStorage FAStT500 Storage Server (EMEA)
3560-1RU |X| IBM TotalStorage 3560 FAStT EXP500 Storage Expansion
| | Unit Model 1RU
3560-1RX |X| IBM TotalStorage FAStT EXP500 Storage Expansion Unit
| | (EMEA)
7133-D40 |X| IBM Serial Disk System Advanced Model D40
7133-T40 |X| IBM Serial Disk System Advanced Model T40
7204-419 |X| IBM 18.2 GB External Disk Drive Model 419
7204-518 |X| IBM 7204 18 GB External Disk Drive Model 518
7204-536 |X| IBM 7204 36 GB External Disk Drive Model 536
7204-573 |X| IBM 7204 External Disk Drive Model 573
| |
---------|-|--------Displays-----------------------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7310-C03 |X| IBM 7310 Model C03 Desktop Hardware Management Console
7310-C04 |X| IBM 7310 Model C04 Desktop Hardware Management Console
7310-CR2 |X| IBM 7310 Model CR2 Rack-Mount Hardware Management
| | Console
7310-CR3 |X| IBM 7310 Model CR3 Rack-Mount Hardware Management
| | Console
7315-C01 |X| IBM 7315 Model C01 Hardware Management Console
7315-C02 |X| IBM 7315 Model C02 Hardware Management Console
7315-C03 |X| IBM 7315 Model C03 Hardware Management Console
7315-C04 |X| IBM 7315 Model C04 Hardware Management Console
7315-CR2 |X| IBM 7315 Model CR2 Rack-Mount Hardware Management
| | Console
7315-CR3 |X| IBM 7315 Model CR3 Rack-Mount Hardware Management
| | Console
7316-TF2 |X| IBM 7316-TF2 Flat Panel Display - 15in Rack Mounted
7316-TF3 |X| IBM 7316-TF3 Flat Panel Display - 17in Rack Mounted
9419-HB7 |X| IBM ThinkVision L191p 19-inch LCD Flat-panel Monitor
9513-AW1 |X| IBM T55A 15.0-inch Color TFT LCD Monitor
9516-B03 |X| IBM MultiMode 16.1-inch TFT LCD Flat Panel Monitor Model
| | B03
9516-B04 |X| IBM MultiMode 16.1-inch TFT LCD Flat Panel Monitor Model
| | B04
| |
---------|-|--------Expansion Cabinets-------------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2032-C36 |X| McDATA 'Core to Edge' Fibre Channel Products Model C36 -
| | FC 512 Cabnet
2032-C40 |X| McDATA 'Core to Edge' Fibre Channel Products Model C40 -
| | FC 512 Cabinet
2109-C36 |X| IBM TotalStorage San Cabinet C36
7014-S11 |X| .6 Meter System Rack Model S11 - 11U
7014-S25 |X| 1.3 Meter System Rack -- 25U
7014-T00 |X| 1.8 Meter System Rack - 36U
7014-T42 |X| 2.0 Meter System Rack - 42U
7031-D24 |X| Ultra 320 SCSI Expandable Disk Storage Enclosures
7031-T24 |X| Ultra 320 SCSI Expandable Disk Storage Enclosures
| |
---------|-|--------Graphics Related---------------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6093-011 |X| CursorPad Tablet
6093-012 |X| Large Tablet
6093-021 |X| IBM Tablet Model 021
6094-010 |X| Dials
6094-020 |X| LPF Keyboard
6094-030 |X| Spaceball
6094-031 |X| Spaceball
6094-040 |X| Spaceball
6094-051 |X| Spaceball
6094-600 |X| Magellan Enhanced Input Device
----------+-+------------OPTICAL-------------------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3996-032 |X| IBM System Storage Model 032
3996-080 |X| IBM System Storage Model 080
3996-174 |X| IBM System Storage Model 174
---------|-|--------SCSI Devices-------------------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7210-020 |X| IBM CR-ROM Model 020
7210-025 |X| 4.7GB DVDRAM Drive
7210-030 |X| IBM 7210-030 External DVD-RAM Drive
| |
---------|-|--------Services-----------------------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0463-001 |X| Software Customization (CCS)
0463-002 |X| Center for Customized Solutions (CCS)
| |
---------|-|--------Storage Network Devices--------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1710-10U |X| IBM 1710 EXP100 Expansion Unit
2105-750 |X| IBM TotalStorage Expandable Storage Server Model 750
2145-4F2 |X| IBM TotalStorage SAN Volume Controller Storage Engine
| | Model 4F2
2146-V1A |X| IBM TotalStorage 2146 SAN Integration Server
| |
---------|-|--------Switch-------------------------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2005-B32 |X| IBM 2005 TotalStorage SAN32B-2 Fabric Switch
2005-H08 |X| IBM TotalStorage SAN Switch 2005 Model H08
2005-H16 |X| IBM TotalStorage SAN Switch 2005 Model H16
2026-224 |X| IBM 2026 TotalStorage SAN24M Mid-range Switch Model 224
2026-E12 |X| IBM 2026 TotalStorage SAN12M-1 Entry Switch Model E12
2027-140 |X| IBM 2027 TotalStorage SAN140M Director Model 140
2027-232 |X| IBM 2027 TotalStorage SAN32M-1 Switch Model 232
2027-256 |X| IBM TotalStorage SAN256M
2027-R16 |X| IBM TotalStorage SAN16M-R
2031-016 |X| McDATA Model 016 Departmental ES-3032 Fabric Switch
2031-032 |X| McDATA Model 032 Departmental ES-3032 Fabric Switch
2031-216 |X| McDATA ES-3216 Fabric Switch
2031-224 |X| McDATA IBM 2031 Model 224 Fabric Switch
2031-232 |X| McDATA ES-3232 Model 232 Fabric Switch
2031-L00 |X| McDATA Model L00 ES-1000 Loop Switch
2032-001 |X| McDATA ED-5000 Model 001 Enterprise Fibre Channel Switch
2032-064 |X| McDATA Model 064 Enterprise Fibre Channel Director
2032-140 |X| 2032 McDATA Intrepid 6140 Enterprise Fibre Channel
| | Director Model 140
2042-001 |X| INRANGE Model 001 FC/9000 64-port Fibre Channel Director
2042-128 |X| INRANGE Model 128 FC/9000 128-port Fibre Channel
| | Director
2042-256 |X| INRANGE Model 256 FC/9000-256 Fibre Channel Director
2045-N16 |X| IBM 2045 TotalStorage SAN256N Director Model N16
2061-020 |X| Cisco Systems MDS 9120 Fabric Switch, Model 020
2061-040 |X| Cisco Systems MDS 9140 Fabric Switch, Model 040
2062-D01 |X| Cisco MDS-9216 Multilayer Fabric Switch, Model D01
2062-D04 |X| Cisco MDS-9506 Multilayer Fabric Switch, Model D04
2062-D07 |X| Cisco , MDS 9509 Multilayer Director, Model D07
2062-T07 |X| Cisco 9509 Multilayer Director Switch (Telecom Model -
| | DC Power)
2109-A16 |X| IBM TotalStorage SAN16B-R Multiprotocol Router
2109-F16 |X| IBM TotalStorage SAN Switch Model F16
2109-F32 |X| IBM TotalStorage SAN Switch - 2109 Model F32
2109-M12 |X| IBM TotalStorage SAN Switch Model M12
2109-M14 |X| IBM TotalStorage SAN Switch 2109 Model M14
2109-S08 |X| IBM SAN Fibre Channel Switch Model S08
2109-S16 |X| IBM SAN Fibre Channel Switch Model S16
3534-F08 |X| IBM TotalStorage Area Network (SAN) Model F08
| |
---------|-|--------Tape---------------------------------------------
- - - - -|-|- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3494-B10 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B10
3494-B18 |X| IBM Magstar Virtual Tape Server Model B18
3494-B20 |X| IBM TotalStorage Virtual Tape Server (VTS) Model B20
3494-D10 |X| IBM Magstar Tape Library Model D10
3494-D12 |X| IBM Magstar Tape Library Model D12
3494-D14 |X| IBM Magstar Tape Library Model D14
3494-D22 |X| IBM TotalStorage Enterprise Tape Drive Expansion Frame
| | Model D22
3494-D24 |X| IBM TotalStorage Enterprise Tape Drive Expansion Frame
| | Model D24
3494-HA1 |X| IBM Magstar 3494 High Availability Unit Model HA1
3494-L10 |X| IBM Magstar Tape Library Model L10
3494-L12 |X| IBM Magstar Tape Library Model L12
3494-L14 |X| IBM Magstar Tape Library Model L14
3494-L22 |X| IBM TotalStorage Enterprise Tape Library Base Frame
| | Model L22
3577-L5U |X| IBM System Storage TS3400 Tape Library
3580-H11 |X| Linear Tape Open (LTO) Bridge Box (HVD)
3580-H13 |X| Linear Tape Open (LTO) Ultrium Tape Drive Model H13
3580-H23 |X| IBM TotalStorage Ultrium 2 Tape Drive Model H23
3580-L11 |X| Linear Tape Open (LTO) Bridge Box (LVD)
3580-L13 |X| Linear Tape Open (LTO) Ultrium Tape Drive Model L13
3580-L23 |X| IBM TotalStorage Ultrium 2 Tape Drive Model L23
3581-F28 |X| IBM TotalStorage Ultrium Tape 2U Autoloader 3581 Model
| | F28
3581-H13 |X| IBM Linear Tape Open Ultrium Tape Autoloader 3581 Model
| | H13
3581-H17 |X| IBM Linear Tape Open (LTO) Ultrium Tape Autoloader Model
| | H17
3581-H23 |X| IBM TotalStorage Ultrium Tape Autoloader Model H23
3581-L13 |X| IBM Linear Tape Open (LTO) Ultrium Tape Autoloader Model
| | L13
3581-L17 |X| IBM Linear Tape Open (LTO) Ultrium Tape Autoloader Model
| | L17
3581-L23 |X| IBM TotalStorage Ultrium Tape Autoloader Model L23
3581-L28 |X| IBM TotalStorage Ultrium Tape U2 Autoloader Model L28
3582-L23 |X| IBM TotalStorage ULTRIUM TAPE LIBRARY 3582 MODEL L23
3583-L18 |X| Linear Tape Open (LTO) Tape Library - Scalable
3583-L36 |X| Linear Tape Open (LTO) Tape Library - Scalable
3583-L72 |X| Linear Tape Open (LTO) Tape Library - Scalable
3584-D32 |X| IBM UltraScalable Tape Library Model D32 - Base Frame
3584-L22 |X| IBM UltraScalable Tape Library Model L22 - Base Frame
3584-L32 |X| IBM UltraScalable Tape Library Model L32 - Expansion
| | Frame
3584-L52 |X| IBM UltraScalable Tape Library Model L52 - Base Frame
3590-B11 |X| IBM Magstar Tape Subsystem Model B11
3590-B1A |X| IBM Magstar Tape Subsystem Model B1A
3590-E11 |X| IBM Magstar Tape Subsystem Model E11
3590-E1A |X| IBM Magstar Tape Subsystem Model E1A
3590-H11 |X| IBM TotalStorage Enterprise Tape Drive Model H11
3590-H1A |X| IBM TotalStorage Enterprise Tape Drive Model H1A
3592-E05 |X| IBM System Storage TS1120 Tape Drive
3592-J1A |X| IBM TotalStorage Enterprise Tape Drive Model J1A
7205-440 |X| IBM 7205 40 GB External Digital Linear Tape Drive Model
| | 440
7205-550 |X| IBM 160 GB External Digital Linear Tape Drive Model 550
7206-220 |X| IBM 20GB External 4MM DDS-4 Tape Drive Model 220
7206-336 |X| IBM 7206 MODEL 336 EXTERNAL 36 GB 4MM DDS GEN5 TAPE DRIVE
7206-VX2 |X| IBM External Tape Drive Model VX2 - 4mm
7206-VX3 |X| IBM 7206-VX3 External Tape Drive
7207-122 |X| IBM 4GB External SLR5 QIC Tape Drive Model 122
7207-330 |X| IBM 7207 30 GB External SLR60 Tape Drive Model 330
7208-345 |X| IBM 7208 Model 345 60GB External 8MM Tape Drive
7212-102 |X| 1U Dual-bay Storage Device Enclosure (Tape or DVD)
7212-103 |X| IBM 7212-103 Storage Tape & DVD Enclosure Exp Model
7212-312 |X| IBM 7212 MODEL 312 1U AUTOLOADER TAPE DRIVE
7332-220 |X| IBM 4MM DDS-4 Tape Cartridge Autoloader Model 220
Feature Availability Matrix
The following feature availability matrix for MT 9111 uses the letter
"A" to indicate features that are available and orderable on the
specified models. "S" indicates a feature that is supported on the new
model during a model conversion; these features will work on the new
model, but additional quantities of these features cannot be ordered on
the new model; they can only be removed. "N" indicates that the feature
is not supported on the new model and must be removed during the model
conversion. As additional features are announced, supported, or
withdrawn, this list will be updated. Please check with your Marketing
Representative for additional information.
|2| A = AVAILABLE S = SUPPORTED
|8| N = NOT SUPPORTED, MUST BE REMOVED
|5|
FEAT/PN | | DESCRIPTION
--------|-|----------------------------------------------------------
0050 |A| IBM Express Seller Indicator
0265 |A| AIX Partition Specify
0983 |A| US TAA Compliance Indicator
1892 |S| VXA-320 160/320GB Internal Tape Drive
1905 |S| 4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter
1907 |S| Dual Channel SCSI RAID Enablement Daughter Card
1910 |S| 4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter
1912 |S| PCI-X DDR Dual Channel Ultra320 LVD SCSI Adapter
1913 |S| PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter
1930 |S| 1024MB (2x512MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
1931 |S| 2048MB (2x1024MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
1932 |S| 4096MB (2x2048MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
1934 |S| 8192MB (2x4096MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
1954 |S| 4-Port 10/100/1000 Base-TX PCI-X Adapter
1968 |S| 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
1969 |S| 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
1970 |S| 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
1971 |S| 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
1972 |S| 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
1973 |S| 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
1974 |S| PCI-X Dual Channel Ultra320 SCSI Adapter
1975 |S| PCI-X Dual Channel Ultra320 SCSI RAID Adapter
1976 |S| Dual Channel SCSI RAID Enablement Card
1977 |S| 2 Gigabit Fibre Channel PCI-X Adapter
1978 |S| IBM Gigabit Ethernet-SX PCI-X Adapter
1979 |S| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
1980 |S| POWER GXT135P Graphics Accelerator with Digital Support
1981 |S| 10 Gigabit Ethernet -SR PCI-X Adapter
1982 |S| IBM 10 Gigabit Ethernet-LR PCI-X Adapter
1983 |S| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
1984 |S| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
1985 |S| 10/100 Mbps Ethernet PCI Adapter II
1986 |S| 1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter
1987 |S| 1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter
1991 |A| 36/72GB 4mm Internal Tape Drive
1992 |S| IBM 80/160 GB Internal Tape Drive with VXA Technology
1993 |A| IBM 4.7 GB IDE Slimline DVD-RAM Drive
1994 |A| IDE Slimline DVD-ROM Drive
1997 |S| 200/400GB Half High Ultrium 2 Tape Drive
2114 |S| PCI SCSI Adapter 16-Bit Differential External Y Cable
2118 |S| Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
2424 |S| 0.6M 16-bit SCSI-2 System to System Cable
2425 |S| 2.5M 16-bit SCSI-2 System-to-System Cable
2456 |A| LC-SC 50 Micron Fiber Converter Cable
2459 |A| LC-SC 62.5 Micron Fiber Converter Cable
2591 |S| External USB 1.44 MB Diskette Drive
2640 |S| IDE Slimline DVD-ROM Drive
2738 |S| 2-Port USB PCI Adapter
2842 |S| POWER GXT4500P Graphics Accelerator
2843 |S| POWER GXT6500P Graphics Accelerator
2849 |S| POWER GXT135P Graphics Accelerator with Digital Support
2861 |S| ARTIC960Hx 4-Port EIA-232 Cable
2863 |S| ARTIC960Hx 4-Port X.21 Cable
2864 |S| ARTIC960Hx 4-Port V.35 (DTE) Cable
2934 |A| Asynchronous Terminal/Printer Cable EIA-232
2936 |A| Asynchronous Cable EIA-232/V.24
2943 |S| 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
2944 |S| 128-Port Asynchronous Controller, PCI bus
2947 |S| IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
2951 |S| Cable, V.24 / EIA-232
2952 |S| Cable, V.35
2953 |S| Cable, V.36 / EIA-499
2954 |S| Cable, X.21
2962 |S| 2-Port Multiprotocol PCI Adapter
3124 |A| Serial to Serial Port Cable for Drawer/Drawer
3125 |A| Serial-to-Serial Port Cable for Rack/Rack
3274 |S| 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
3275 |S| 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
3277 |S| 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
3278 |S| 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
3279 |S| 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
3578 |S| 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
3585 |S| 300 GB 15K RPM SCSI Disk Drive
3628 |S| IBM P260/P275 Color Monitor, Business Black, and Cable
3636 |S| L200P Flat Panel Monitor
3637 |S| IBM T541H /L150p 15" TFT Color Monitor
3638 |S| IBM C220p 21-inch Color Monitor, Business Black, and
| | Cable
3639 |S| IBM ThinkVision L170p Flat Panel Monitor
3640 |S| ThinkVision L171p Flat Panel Monitor
3641 |S| IBM T115 Flat Panel Monitor
3642 |S| ThinkVision L191p Flat Panel Monitor
3643 |S| IBM T120 Flat Panel Monitor
3644 |S| IBM T119 Flat Panel Monitor
3645 |S| IBM T117 Flat Panel Monitor
3752 |S| Service Package
3925 |A| Serial Port Converter Cable, 9-Pin to 25-Pin
3926 |S| Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
3927 |A| Serial Port Null Modem Cable, 9-pin to 9-pin, 3.7M
3928 |A| Serial Port Null Modem Cable, 9-pin to 9-pin, 10M
4242 |A| 6-Foot Extender Cable for Displays (15-pin D-shell to
| | 15-pin D-shell)
4256 |A| Extender Cable - USB Keyboards, 2M
4267 |A| SCSI Cable, PCI Adapter to Hot-Swap Disks
4275 |A| External SCSI Port Enablement Cable
4278 |A| SCSI Cables (Power and Logic), PCI Riser to SCSI LVD
| | Media Device; Mounting Tray
4959 |S| IBM Token-Ring PCI Adapter
4962 |S| 10/100 Mbps Ethernet PCI Adapter II
5001 |S| Custom Service Specify
5005 |A| Software Preinstall
5170 |A| Power Supply, 700 Watt AC
5326 |S| 1-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache
5327 |S| 2-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache
5700 |S| IBM Gigabit Ethernet-SX PCI-X Adapter
5701 |S| IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
5703 |S| PCI-X Dual Channel Ultra320 SCSI RAID Adapter
5706 |S| IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
5707 |S| IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
5709 |S| Dual Channel SCSI RAID Enablement Card
5712 |S| PCI-X Dual Channel Ultra320 SCSI Adapter
5713 |S| 1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter
5714 |S| 1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter
5716 |S| 2 Gigabit Fibre Channel PCI-X Adapter
5718 |S| 10 Gigabit Ethernet -SR PCI-X Adapter
5719 |S| IBM 10 Gigabit Ethernet-LR PCI-X Adapter
5721 |S| 10 Gb Ethernet-SR PCI-X 2.0 DDR Adapter
5722 |S| 10 Gb Ethernet-LR PCI-X 2.0 DDR Adapter
5723 |S| 2-Port Asynchronous EIA-232 PCI Adapter
5727 |S| Dual Channel SCSI RAID Enablement Card
5736 |S| PCI-X DDR 2.0 Dual Channel Ultra320 SCSI Adapter
5737 |S| PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter
5740 |S| 4-Port 10/100/1000 Base-TX PCI-X Adapter
5751 |S| IBM 4.7 GB IDE Slimline DVD-RAM Drive
5755 |S| 200/400GB Half High Ultrium 2 Tape Drive
5758 |S| 4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter
5759 |S| 4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter
5951 |A| Full Width Quiet Touch Keyboard -- USB, US English, #103P
5952 |A| Full Width Quiet Touch Keyboard -- USB, French, #189
5953 |A| Full Width Quiet Touch Keyboard -- USB, Italian, #142
5954 |A| Full Width Quiet Touch Keyboard -- USB, German/Austrian, #129
5955 |A| Full Width Quiet Touch Keyboard -- USB, UK English, #166P
5956 |A| Full Width Quiet Touch Keyboard -- USB, Spanish, #172
5957 |A| Full Width Quiet Touch Keyboard -- USB, Japanese, #194
5958 |A| Full Width Quiet Touch Keyboard -- USB, Brazilian
| | Portuguese, #275
5959 |A| Full Width Quiet Touch Keyboard -- USB, Hungarian, #208
5960 |A| Full Width Quiet Touch Keyboard -- USB, Korean, #413
5961 |A| Full Width Quiet Touch Keyboard -- USB, Chinese, #467
5962 |A| Full Width Quiet Touch Keyboard -- USB, French Canadian, #445
5963 |A| Full Width Quiet Touch Keyboard -- USB, Canadian French, #058
5964 |A| Full Width Quiet Touch Keyboard -- USB, Belgian/French, #120
5965 |A| Full Width Quiet Touch Keyboard -- USB, Swedish/Finnish, #153
5966 |A| Full Width Quiet Touch Keyboard -- USB, Danish, #159
5967 |A| Full Width Quiet Touch Keyboard -- USB, Bulgarian, #442
5968 |A| Full Width Quiet Touch Keyboard -- USB, Swiss/French/
| | German, #150
5969 |A| Full Width Quiet Touch Keyboard -- USB, Norwegian,#155
5970 |A| Full Width Quiet Touch Keyboard -- USB, Dutch, #143
5971 |A| Full Width Quiet Touch Keyboard -- USB, Portuguese, #163
5972 |A| Full Width Quiet Touch Keyboard -- USB, Greek, #319
5973 |A| Full Width Quiet Touch Keyboard -- USB, Hebrew, #212
5974 |A| Full Width Quiet Touch Keyboard -- USB, Polish, #214
5975 |A| Full Width Quiet Touch Keyboard -- USB, Slovakian, #245
5976 |A| Full Width Quiet Touch Keyboard -- USB, Czech, #243
5977 |A| Full Width Quiet Touch Keyboard -- USB, Turkish, #179
5978 |A| Full Width Quiet Touch Keyboard -- USB, LA Spanish, #171
5979 |A| Full Width Quiet Touch Keyboard -- USB, Arabic, #253
5980 |A| Full Width Quiet Touch Keyboard -- USB, Thai, #191
5981 |A| Full Width Quiet Touch Keyboard -- USB, Russian, #443
5982 |A| Full Width Quiet Touch Keyboard -- USB, Slovenian, #234
5983 |A| Full Width Quiet Touch Keyboard -- USB, US English
| | International, #103P
6120 |S| IBM 80/160 GB Internal Tape Drive with VXA Technology
6204 |S| PCI Universal Differential Ultra SCSI Adapter
6239 |S| 2 Gigabit Fibre Channel PCI-X Adapter
6258 |S| 36/72GB 4mm Internal Tape Drive
6271 |S| LTO Ultrium 200GB Data Cartridge
6279 |S| VXA-320 160/320GB Internal Tape Drive
6470 |A| Power Cord (6-foot), To Wall (125V, 15A), Plug Type #4
6471 |A| Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug
| | Type #70
6472 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
| | Type #18
6473 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
| | Type 19
6474 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 13A), Plug
| | Type #23
6475 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
| | Type #32
6476 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
| | Type #24
6477 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
| | Type #22
6478 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
| | Type #25
6487 |S| Power Cord (6-foot) ,To Wall, (250V, 15A), United
| | States, Plug Type #5
6488 |A| Power Cord (9-foot) , To Wall/OEM PDU, (125V, 15A or
| | 250V, 10A), Plug Type #2
6493 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
| | Type #62
6494 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
| | Type #69
6495 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
| | Type #73
6496 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
| | Type #66
6574 |S| Ultra320 SCSI 4-Pack
6585 |A| DASD Locking Kit
6598 |A| Disk Slot Fillers (Quantity 4)
6651 |A| Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug
| | Type #75
6659 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug
| | Type #76
6670 |A| Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59
| | (DENAN marking)
6680 |A| Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
| | Type #6, Insulated
6687 |A| Power Cord (6-foot),To Wall, (250V, 15A), Plug Type #57
| | (DENAN marking)
7305 |A| AAP Software Pre-Install Indicator
7319 |A| One Processor Entitlement for Processor Feature # 8327
7320 |A| One Processor Entitlement for Processor Feature #8330
7336 |A| One Processor Entitlement for Processor Feature #5326
7339 |A| One Processor Entitlement for Processor Feature #5327
7801 |A| Ethernet Cable, 6M, Hardware Management Console to System
| | Unit
7802 |A| Ethernet Cable, 15M, Hardware Management Console to
| | System Unit
7877 |S| Media Backplane
8131 |S| 128-Port Asynchronous Controller Cable, 4.5 Meter
8132 |S| 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
8133 |S| RJ-45 to DB-25 Converter Cable
8136 |S| Rack Mountable Remote Asynchronous Node 16-Port EIA-232
8137 |S| Enhanced Remote Asynchronous Node 16-Port EIA-232
8227 |S| Tie-down Strap Security Device
8231 |S| Memory Offering -- 32GB/64GB/96GB/128GB (Multiples of
| | 4 of 2x4GB DIMMs)
8244 |S| Audio PCI Adapter for Workstations
8327 |A| 1-core 1.65 GHz POWER5+ Processor Card, 36MB L3 Cache
8330 |A| 2-core 1.9 GHz POWER5+ Processor Card, 36MB L3 Cache
8402 |A| Zero-priced Processor Entitlement for #5326
8403 |A| Zero-priced Processor Entitlement for #5327
8409 |A| Zero-priced Express Product Offering Processor
| | Entitlement for #8327
8410 |A| Zero-priced Express Product Offering Processor
| | Entitlement for #8330
8422 |S| SpaceBall 3D Input Device
8423 |S| Magellan XT 3D Input Device
8424 |S| SpaceBall 3D Input Device (USB)
8425 |S| SpaceMouse 3D Input Device (USB)
8426 |S| SpacePilot 3D Input Device
8800 |S| Quiet Touch Keyboard - USB, Business Black, US English,
| | #103P
8801 |S| Quiet Touch Keyboard - USB, Business Black, French, #189
8802 |S| Quiet Touch Keyboard - USB, Business Black, Italian, #142
8803 |S| Quiet Touch Keyboard - USB, Business Black,
| | German/Austrian, #129
8804 |S| Quiet Touch Keyboard - USB, Business Black, UK English,
| | #166
8805 |S| Quiet Touch Keyboard - USB, Business Black, Spanish, #172
8806 |S| Quiet Touch Keyboard - USB, Business Black, Japanese,
| | #194
8807 |S| Quiet Touch Keyboard - USB, Business Black,
| | Brazilian/Portuguese, #275
8808 |S| Quiet Touch Keyboard - USB, Business Black, Canadian
| | French, #058
8810 |S| Quiet Touch Keyboard - USB, Business Black,
| | Belgian/Dutch, #120
8811 |S| Quiet Touch Keyboard - USB, Business Black,
| | Swedish/Finnish, #153
8812 |S| Quiet Touch Keyboard - USB, Business Black, Danish, #159
8813 |S| Quiet Touch Keyboard - USB, Business Black, Bulgarian,
| | #442
8814 |S| Quiet Touch Keyboard - USB, Business Black,
| | Swiss/French/German, #150F/G
8816 |S| Quiet Touch Keyboard - USB, Business Black, Norwegian,
| | #155
8817 |S| Quiet Touch Keyboard - USB, Business Black, Dutch, #143
8818 |S| Quiet Touch Keyboard - USB, Business Black, Portuguese,
| | #163
8819 |S| Quiet Touch Keyboard - USB, Business Black, Greek, #319
8820 |S| Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
8821 |S| Quiet Touch Keyboard - USB, Business Black, Hungarian,
| | #208
8823 |S| Quiet Touch Keyboard - USB, Business Black, Polish, #214
8825 |S| Quiet Touch Keyboard - USB, Business Black, Slovakian,
| | #245
8826 |S| Quiet Touch Keyboard - USB, Business Black, Czech, #243
8827 |S| Quiet Touch Keyboard - USB, Business Black, Turkish, #179
8829 |S| Quiet Touch Keyboard - USB, Business Black, LA Spanish,
| | #171
8830 |S| Quiet Touch Keyboard - USB, Business Black, Arabic, #238
8833 |S| Quiet Touch Keyboard - USB, Business Black, Korean, #413
8834 |S| Quiet Touch Keyboard - USB, Business Black, Chinese/US,
| | #467
8835 |S| Quiet Touch Keyboard - USB, Business Black, French
| | Canadian, #445
8836 |S| Quiet Touch Keyboard - USB, Business Black, Thai, #191
8838 |S| Quiet Touch Keyboard - USB, Business Black, Russian, #443
8839 |S| Quiet Touch Keyboard - USB, Business Black,
| | Yugoslavian/Latin, #105
8840 |S| Quiet Touch Keyboard - USB, Business Black, US English
| | (EMEA), #103P
8841 |S| Mouse - USB, Business Black with Keyboard Attachment
| | Cable
8845 |A| USB Mouse
9004 |A| Southern Hemisphere Designator for Monitors
9300 |A| Language Group Specify - US English
9700 |A| Language Group Specify - Dutch
9703 |A| Language Group Specify - French
9704 |A| Language Group Specify - German
9705 |A| Language Group Specify - Polish
9707 |A| Language Group Specify - Portuguese
9708 |A| Language Group Specify - Spanish
9711 |A| Language Group Specify - Italian
9712 |A| Language Group Specify - Canadian French
9714 |A| Language Group Specify - Japanese
9715 |A| Language Group Specify - Traditional Chinese (Taiwan)
9716 |A| Language Group Specify - Korean
9718 |A| Language Group Specify - Turkish
9719 |A| Language Group Specify - Hungarian
9720 |A| Language Group Specify - Slovakian
9721 |A| Language Group Specify - Russian
9722 |A| Language Group Specify - Simplified Chinese (PRC)
9724 |A| Language Group Specify - Czech
9725 |A| Language Group Specify -- Romanian
9727 |A| Language Group Specify -- Slovenian
Model Conversions
None.
Back to top
Deskside/Desktop
- Width: 240 mm (09.5 in)
- Depth: 695 mm (27.4 in)
- Height: 535 mm (21.1 in)
- Weight:
- Minimum configuration: 35.5 Kg (78.1 lb)
- Maximum configuration: 43.0 Kg (94.6 lb)
- Temperature: (Nonoperating) 5 to 45C (41 to 113 F) Recommended
temperature (Operating) 5 to 35C (41 to 95 F)
- Relative humidity: 8% to 80%
- Maximum wet bulb: (Power Off) 27C (80 F)
- Operating voltage: 1-way or 2-way: 100 to 127 or 200 to 240 V ac
(auto-ranging)
- Operating frequency: 47/63 Hz
- Power consumption: 600 watts (maximum)
- Thermal output: 2,046 Btu/hour (maximum)
- Power source loading: 0.632 kVA (maximum configuration)
- Maximum altitude: 3,048 m (10,000 ft)
Noise level and sound power
- 5.0 Bels Idle/5.1 Bels operating
EMC Conformance Classification
This equipment is subject to FCC rules and shall comply with the
appropriate FCC rules before final delivery to the buyer or centers of
distribution.
- U.S.A.: FCC Class B
- Europe: CISPR 22 Class B
- Japan: VCCI-B
- Korea: Korean Requirement Class B
- China: People's Republic of China commodity inspection law
Product safety/country testing/certification
- UL 1950 Underwriters Laboratory, Safety Information
- CSA C22.2 No. 950-M86
- EN60950 European Norm
- IEC 950, Edition 1, International Electrotechnical Commission, Safety
Information
- Nordic deviations to IEC-950 1st Edition, as outlined in document
EMKO-TSE(05-SEC) 200/93
General Requirements
The product is in compliance with IBM Corporate Bulletin C-B
0-2594-000 Statement of Conformity of IBM Product to External Standard
(Suppliers Declaration).
Homologation -- Telecom Environmental Testing (Safety and
EMC)
Homologation approval for specific countries has been initiated with
the IBM Homologation and Type Approval (HT&A) organization in LaGaude.
This IntelliStation model and applicable features meet the environmental
testing requirements of the country TELECOM and have been designed and
tested in compliance with the Full Quality Assurance Approval(FQAA)
process as delivered by the British Approval Board for Telecom (BABT),
the U.K. Telecom regulatory authority.
System
- External SCSI Port Enablement Cable:
- Cannot use slot 5 when #4275 is installed in the system
- Maximum external cable length supported by #4275 is 6 meters
- The system ports are similar to serial ports, however they are
disabled when either HMC port is connected to a Hardware Management
Console. Either the HMC ports or the system ports can be used, but not
both.
Even when no HMC is attached, integrated system ports will work
properly only with modems, async terminals, and certain UPSs for which
the manufacturer provides a special cable. Attachment of any other
serial devices (including system-to-system connections for HACMP)
requires a serial port adapter in a PCI slot.
- In a Class B EMI environment, the SpacePilot (#8426), SpaceBall
(#8422/#8424), and SpaceMouse (#8423/#8425) input devices cannot be
attached to a keyboard USB port. These devices must be attached to a
system USB port.
- The maximum external cable length supported by #4270 is 6 meters.
Processor Cards
- Only one processor card may be installed in the system. Processor
cards are soldered to the planar.
- 1-core 1.9 GHz processor (#8327) requires that one processor
entitlement (1 x #7319 or 1 x #8409) be ordered.
- 1-core 2.1 GHz processor (#5326) requires that one processor
entitlement (1 x #7336 or 1 x #8402) be ordered.
- 2-core 1.9 GHz processor (#8330) requires that at two processor
entitlements (#7320 or #8410) be ordered. A maximum of two processor
entitlement features (2 x #7320, or 1 x #7320 and 1 x #8410) are allowed
per processor card.
- 2-core 2.1 GHz processor (#5327) requires that at two processor
entitlements (#7339 or #8403) be ordered. A maximum of two processor
entitlement features (2 x #7339, or 1 x #7339 and 1 x #8403) are allowed
per processor card.
Redundant power supply/Fans
- Redundant power supplies are not available on the POWER 285
workstation
- Redundant fans are standard
System memory
- A minimum of 1 GB of memory is required.
- A maximum of 32 GB of system memory is available.
Memory Features
Feature number quantity quantity
======= ====== ======== ========
1024 MB DDR-2 1930 0 4
(2 x 512 MB DIMMs)
2048 MB DDR-2 1931 0 4
(2 x 1024 MB DIMMs)
4096 MB DDR-2 1932 0 4
(2 x 2048 MB DIMMs)
8192 MB DDR-2 1934 0 4
(2 x 4096 MB DIMMs)
PCI Card Slots
The IntelliStation POWER 285 workstation has a maximum of six hot-plug
PCI-X slots:
- Slots 1, 5, and 6 are 64-bit and run at 133 MHz.
- Slot 4 is Double Data Rate (DDR), 64-bit and runs at 266 MHz.
- Slots 2 and 3 are 32-bit and run at 66 MHz.
- Slots 4, 5, and 6 are long; slots 1, 2, and 3 can accommodate short
cards only.
Graphics Adapters
- A 2D graphics adapter is required in the minimum configuration.
- The maximum number of graphics adapters supported in the POWER 285
workstation is four.
- Graphics adapters are not hot-swap capable.
- 3D graphics adapters (#2842 and #2843) do not support the T115
display (#3641).
I/O Adapters
- Feature number 1907 is not plugged into a slot.
- Feature numbers 1981, 1982, 5718, and 5719 require that a minimum
2-way processor be installed in the system.
- Maximum of one of feature number 1981, 1982, 5718, and 5719 is
allowed in the system.
- Refer to Figure 2 for additional I/O adapter limitations.
Figure 2. I/O Adapter Features
Orderable Supported
Feature Feature Max
I/O Adapter number Number qty Size
=========== ========= ========= === =====
Dual Channel Ultra320 1974 5 Short
Dual Channel Ultra320 SCSI RAID 1975 3 Long
Dual Channel Ultra320 SCSI RAID 5703 3 Long
Dual Channel SCSI RAID Enablement 1976 1 N/A
2 Gb Fibre Channel PCI-X 1977 5716 4 Short
Gigabit Ethernet 1978 5700 5 Short
10/100/1000 Ethernet 1979 5701 5 Short
GXT135P Graphics Accelerator 1980 2849 4 Short
10 Gigabit Ethernet - SR 1981 5718 1 Short
10 Gigabit Ethernet - LR 1982 5719 1 Short
2-port 10/100/1000 Ether. 1983 5706 5 Short
2-port Gigabit Ethernet-SX 1984 5707 5 Short
10/100 Mbps Ethernet 1985 5 Short
SCSI RAID Enablement Card 1907 5727 1 N/A
PCI-X Ultra320 SCSI DDR 1912 5736 5 Short
2-port USB PCI 2738 3 Short
POWER GXT4500P Graphics 2842 2 Long
POWER GXT6500P Graphics 2843 1 Long
8-Port Asynchronous EIA-232 2943 2 Short
128-Port Asynchronous Controller 2944 2 Short
Artic960 Hx 4-ports 2947 3 Long
2-Port Multiprotocol 2962 4 Short
Token-Ring PCI 4959 4 Short
10/100 Mbps Ethernet 4962 5 Short
Dual Channel SCSI RAID Enablement 5709 1 N/A
Dual Channel Ultra320 5712 5 Short
2-port Asynchronous EIA-232 5723 2 Short
Universal Differential Ultra SCSI 6204 2 Short
2 Gigabit Fibre Channel 6239 5 Short
Audio PCI Adapter 8244 1 Short
PCI-X DDR Dual Channel Ultra320 1913 5737 3 Long
RAID
4-Port 10/100/1000 Base-TX PCI-X 1954 5740 4 Short
1 Gigabit iSCSI TOE PCI-X on 1986 5713 3 Short
Copper
1 Gigabit iSCSI TOE PCI-X on 1987 5714 3 Short
Optical
4 Gb Single-Port Fibre Channel 1905 5758 3 Short
4 Gb Dual-Port Fibre Channel 1910 5759 3 Short
10 Gb Ethernet-SR 5721 1 Short
10 Gb Ethernet-LR 5722 1 Short
Storage Devices/Bays
- The POWER 285 workstation has one DASD 4-pack in the system (#6574).
- Media bays can contain an optional DVD-ROM (#1994 or follow-on) in
bays 2 and 3, an optional DVD-RAM (#1993 or follow-on) in bays 2 and 3,
and an optional tape drive (#1991, #1992, #1997, or follow-ons) in bay 4.
- If optional tape drive feature number 1892, 1991, 1992, 1997, 5755,
6120, 6258 or 6279 is installed, cable feature number 4278 is required.
Cable feature number 4278 requires 1892, 1991, 1992, 1997, 5755, 6120,
6258 Or 6279 to be installed.
- The first optical device can only be installed in the top slimline
bay (bay D2) in the rack configuration.
Figure 3. Storage Device Features
Orderable Supported
Maximum feature feature
Device quantity Bay number number
====== ======= ========= ======= =======
DVD-ROM (IDE) 2 Media 2/3 1994 2640
DVD-RAM (IDE) 2 Media 2/3 1993 5751
4-mm 36/72 GB Tape (LVD) 1 Media 4 1991 6258
8-mm 60/150 GB Tape (LVD) 1 Media 4 1992 6120
200/400 GB Tape (LVD) 1 Media 4 1997 5755
VXA-320 160/320GB Internal 1 Media 4 1892 6279
Tape Drive
36.4 GB 15,000 rpm Ultra320
SCSI Disk, Hot-swap 4 DASD 1-4 1970 3277
73.4 GB 10,000 rpm 4 DASD 1-4 1968 3274
Ultra320 SCSI Disk,
Hot-swap
73.4 GB 15,000 rpm 4 DASD 1-4 1971 3278
Ultra320 SCSI Disk, Hot-swap
146.8 GB 10,000 rpm, 4 DASD 1-4 1969 3275
Ultra320 SCSI Disk, Hot-swap
146.8 GB 15,000 rpm, 4 DASD 1-4 1972 3279
Ultra320 SCSI Disk, Hot-swap
300 GB 10,000 rpm, 4 DASD 1-4 1973 3578
Ultra320 SCSI Disk, Hot-swap
Ultra320 SCSI 4-pack 1 System Planar 6574
Cable Orders
No cables required.
IBM IntelliStation POWER 285 workstation minimum system
configuration
The POWER 285 workstation can be configured to incorporate a 2-core
processor, 32 GB of system memory, six PCI adapters, and multiple media
devices, as required. This flexibility is made available through the
many optional features for the POWER 285 workstation.
Each POWER 285 workstation must include a minimum of the
following items:
RAID
Internal RAID is available on the IntelliStation POWER 285
workstation.
A single option is available to customers who want to install
hardware-assisted RAID on their systems:
- Install feature number 1907, the Dual Channel SCSI RAID Enablement
Card. Install four disk drives in feature number 6574, the Ultra320 SCSI
4-pack enclosure. This will allow RAID capabilites within a single
4-pack of DASD.
Display cable feature number matrix
The following chart shows the cable feature to graphics accelerator
reference. Check your specific system model to determine which graphics
accelerators are supported on which model.
Graphics Accelerators
GXT2000P/ GXT4000P/ GXT4500P/
GXT130P GXT135P GXT300P GXT3000P GXT6000P GXT6500P
Displays (5D/DDC) (15D/DDC) (15D/DDC) (DVI/DDC) (DVI/DDC)
-------- -------- ------- --------- --------- --------- ---------
P70 4238 4238 4238 4238 4238(1) 4238(1)
P72(2) Display Display Display Display Display(1) Display(1)
P76(2) Display Display Display Display Display(1) Display(1)
P77(2) Display Display Display Display Display(1) Display(1)
P92(3) Display Display Display Display Display(1) Display(1)
P200 4238 4238 4238 4238 4238(1) 4238(1)
P201 4237 4237 4237 4237 4237(1) 4237(1)
P202(3) Display Display Display Display Display(1) Display(1)
P260(3) Display Display Display Display Display Display
P275(3) Display Display Display Display Display Display
C220p(3) Display Display Display NS Display Display
9516-B03 4217 4217 4217 4217 4217(1) 4217(1)
9511-Axx Display Display NS NS NS NS
T54A/T54H/T540
9519-Axx Display Display NS Display NS Display
T85A
9493-Axx Display Display NS NS NS NS
T56A
9512-Hxx Display Display NS NS NS NS
T541H
6636-Hxx Display Display NS NS NS NS
L150p
9494-xxx NS Display NS NS NS Display
T860
9497-Axx Display Display Display Display NS Display(1)
T86A
6656-Hxx NS Display NS NS NS NS
T560
6658-Hxx Display Display NS Display NS Display
T84H
6659-Hxx NS Display NS NS NS Display
T210
6736-Hxx NS Display NS NS NS Display
L200p
6736-Hxx NS Display NS NS NS Display
L170p
9417-HBx NS Display NS NS NS Display
L171p
9417-HB7 NS Display NS NS NS Display
L191p
4942-15U/X NS Display NS NS NS NS
T115
4943-17U/X NS Display NS NS NS Display
T117
4944-19U/X NS Display NS NS NS Display
T119
4945-20U/X NS Display NS NS NS Display
T120
Note: NS = Not Supported - This display/adapter combination is not
supported.display."
Note: (1) Must use DVI to 15-pin D-shell converter supplied with the
GXT4000P, GXT4500P, GXT6000P or GXT6500P
Note: (2) Captured 15-pin D-shell cable".
Note: (3) Dual input on monitor.
- AIX 5L for POWER V5.2 with the 5200-07 Recommended Maintenance
Package (APAR IY67914), or later
- AIX 5L for POWER V5.3 with the 5300-03 Recommended Maintenance
Package (APAR IY71011), or later
Back to top
The following information is shipped with the IntelliStation POWER 285
workstation.
Order
Title Language number
----- -------- ----------
IBM System Hardware Information
Center CD-ROM U.S English SK3T-8159
Simplified Chinese S152-0852
Traditional Chinese SK3T-0199
Croatian SK3T-0387
Czech SK4T-0080
Dutch/Belgian Dutch SK3T-1375
French/Swiss French/
Belgian French/
Canadian French SK4T-0079
German/Swiss German SK3T-2571
Hungarian SK3T-7337
Ialian/Swiss Italian SK2T-8431
Japanese SK88-4002
Korean SK24-0018
Polish SK3T-5499
Brazilian Portuguese S517-8002
Portuguese SK3T-0213
Portuguese MNCS SK17-0213
Romanian SK3T-0386
Russian SK3T-1610
Slovakian SK3T-0385
Slovenian SK3T-0384
Spanish SK3T-7776
IBM eServer Safety Information G229-9054
Setup Instructions SA41-5156
IBM Statement of Limited Warranty Z125-4753
IBM License Agreement for Machine Code Z125-5468
Pointer Sheet for Machine Internal Code License Agreement GC52-1065
Back to top
- Administrative
- (#0983) - US TAA Compliance Indicator
- Languages
- (#9300) - Language Group Specify - US English
- (#9700) - Language Group Specify - Dutch
- (#9703) - Language Group Specify - French
- (#9704) - Language Group Specify - German
- (#9705) - Language Group Specify - Polish
- (#9707) - Language Group Specify - Portuguese
- (#9708) - Language Group Specify - Spanish
- (#9711) - Language Group Specify - Italian
- (#9712) - Language Group Specify - Canadian French
- (#9714) - Language Group Specify - Japanese
- (#9715) - Language Group Specify - Traditional Chinese (Taiwan)
- (#9716) - Language Group Specify - Korean
- (#9718) - Language Group Specify - Turkish
- (#9719) - Language Group Specify - Hungarian
- (#9720) - Language Group Specify - Slovakian
- (#9721) - Language Group Specify - Russian
- (#9722) - Language Group Specify - Simplified Chinese (PRC)
- (#9724) - Language Group Specify - Czech
- (#9725) - Language Group Specify -- Romanian
- (#9727) - Language Group Specify -- Slovenian
- Miscellaneous
- (#0050) - IBM Express Seller Indicator
- (#5001) - Custom Service Specify
- (#5005) - Software Preinstall
- (#7305) - AAP Software Pre-Install Indicator
- (#8231) -Memory Offering -- 32GB/64GB/96GB/128GB (Multiples of 4 of
2x4GB DIMMs)
Special Features - Initial Orders
- Miscellaneous
- (#6574) - Ultra320 SCSI 4-Pack
- Power
- (#5170) - Power Supply, 700 Watt AC
- Processor
- (#5326) - 1-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache
- (#5327) - 2-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache
- (#8327) - 1-core 1.65 GHz POWER5+ Processor Card, 36MB L3 Cache
- (#8330) - 2-core 1.9 GHz POWER5+ Processor Card, 36MB L3 Cache
Special Features - Plant and/or Field Installable
- Adapters
- (#1905) - 4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter
- (#1907) - Dual Channel SCSI RAID Enablement Daughter Card
- (#1910) - 4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter
- (#1912) - PCI-X DDR Dual Channel Ultra320 LVD SCSI Adapter
- (#1913) - PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter
- (#1954) - 4-Port 10/100/1000 Base-TX PCI-X Adapter
- (#1974) - PCI-X Dual Channel Ultra320 SCSI Adapter
- (#1975) - PCI-X Dual Channel Ultra320 SCSI RAID Adapter
- (#1976) - Dual Channel SCSI RAID Enablement Card
- (#1977) - 2 Gigabit Fibre Channel PCI-X Adapter
- (#1978) - IBM Gigabit Ethernet-SX PCI-X Adapter
- (#1979) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#1980) - POWER GXT135P Graphics Accelerator with Digital Support
- (#1981) - 10 Gigabit Ethernet -SR PCI-X Adapter
- (#1982) - IBM 10 Gigabit Ethernet-LR PCI-X Adapter
- (#1983) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#1984) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
- (#1985) - 10/100 Mbps Ethernet PCI Adapter II
- (#1986) - 1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter
- (#1987) - 1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter
- (#2738) - 2-Port USB PCI Adapter
- (#2842) - POWER GXT4500P Graphics Accelerator
- (#2843) - POWER GXT6500P Graphics Accelerator
- (#2849) - POWER GXT135P Graphics Accelerator with Digital Support
- (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
- (#2944) - 128-Port Asynchronous Controller, PCI bus
- (#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
- (#2962) - 2-Port Multiprotocol PCI Adapter
- (#4959) - IBM Token-Ring PCI Adapter
- (#4962) - 10/100 Mbps Ethernet PCI Adapter II
- (#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter
- (#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5703) - PCI-X Dual Channel Ultra320 SCSI RAID Adapter
- (#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
- (#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
- (#5709) - Dual Channel SCSI RAID Enablement Card
- (#5712) - PCI-X Dual Channel Ultra320 SCSI Adapter
- (#5713) - 1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter
- (#5714) - 1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter
- (#5716) - 2 Gigabit Fibre Channel PCI-X Adapter
- (#5718) - 10 Gigabit Ethernet -SR PCI-X Adapter
- (#5719) - IBM 10 Gigabit Ethernet-LR PCI-X Adapter
- (#5721) - 10 Gb Ethernet-SR PCI-X 2.0 DDR Adapter
- (#5722) - 10 Gb Ethernet-LR PCI-X 2.0 DDR Adapter
- (#5723) - 2-Port Asynchronous EIA-232 PCI Adapter
- (#5727) - Dual Channel SCSI RAID Enablement Card
- (#5736) - PCI-X DDR 2.0 Dual Channel Ultra320 SCSI Adapter
- (#5737) - PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter
- (#5740) - 4-Port 10/100/1000 Base-TX PCI-X Adapter
- (#5758) - 4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter
- (#5759) - 4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter
- (#6204) - PCI Universal Differential Ultra SCSI Adapter
- (#6239) - 2 Gigabit Fibre Channel PCI-X Adapter
- (#8244) - Audio PCI Adapter for Workstations
- Cable
- (#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable
- (#2118) - Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
- (#2424) - 0.6M 16-bit SCSI-2 System to System Cable
- (#2425) - 2.5M 16-bit SCSI-2 System-to-System Cable
- (#2456) - LC-SC 50 Micron Fiber Converter Cable
- (#2459) - LC-SC 62.5 Micron Fiber Converter Cable
- (#2861) - ARTIC960Hx 4-Port EIA-232 Cable
- (#2863) - ARTIC960Hx 4-Port X.21 Cable
- (#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable
- (#2934) - Asynchronous Terminal/Printer Cable EIA-232
- (#2936) - Asynchronous Cable EIA-232/V.24
- (#2951) - Cable, V.24 / EIA-232
- (#2952) - Cable, V.35
- (#2953) - Cable, V.36 / EIA-499
- (#2954) - Cable, X.21
- (#3124) - Serial to Serial Port Cable for Drawer/Drawer
- (#3125) - Serial-to-Serial Port Cable for Rack/Rack
- (#3925) - Serial Port Converter Cable, 9-Pin to 25-Pin
- (#3926) - Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
- (#3927) -Serial Port Null Modem Cable, 9-pin to 9-pin, 3.7M
- (#3928) -Serial Port Null Modem Cable, 9-pin to 9-pin, 10M
- (#4242) - 6-Foot Extender Cable for Displays (15-pin D-shell to
15-pin D-shell)
- (#4256) - Extender Cable - USB Keyboards, 2M
- (#4267) - SCSI Cable, PCI Adapter to Hot-Swap Disks
- (#4275) - External SCSI Port Enablement Cable
- (#4278) - SCSI Cables (Power and Logic), PCI Riser to SCSI LVD Media
Device; Mounting Tray
- (#7801) - Ethernet Cable, 6M, Hardware Management Console to System
Unit
- (#7802) - Ethernet Cable, 15M, Hardware Management Console to System
Unit
- (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter
- (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
- (#8133) - RJ-45 to DB-25 Converter Cable
- (#8136) - Rack Mountable Remote Asynchronous Node 16-Port EIA-232
- (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232
- Disk
- (#1968) - 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#1969) - 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#1970) - 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#1971) - 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#1972) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#1973) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3274) - 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3275) - 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3277) - 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3278) - 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3279) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
- (#3585) - 300 GB 15K RPM SCSI Disk Drive
- (#6598) - Disk Slot Fillers (Quantity 4)
- Display
- (#3628) - IBM P260/P275 Color Monitor, Business Black, and Cable
- (#3636) - L200P Flat Panel Monitor
- (#3637) - IBM T541H /L150p 15" TFT Color Monitor
- (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
- (#3639) - IBM ThinkVision L170p Flat Panel Monitor
- (#3640) - ThinkVision L171p Flat Panel Monitor
- (#3641) - IBM T115 Flat Panel Monitor
- (#3642) - ThinkVision L191p Flat Panel Monitor
- (#3643) - IBM T120 Flat Panel Monitor
- (#3644) - IBM T119 Flat Panel Monitor
- (#3645) - IBM T117 Flat Panel Monitor
- Keyboards
- (#5951) - Full Width Quiet Touch Keyboard -- USB, US English, #103P
- (#5952) - Full Width Quiet Touch Keyboard -- USB, French, #189
- (#5953) - Full Width Quiet Touch Keyboard -- USB, Italian, #142
- (#5954) - Full Width Quiet Touch Keyboard -- USB, German/Austrian,
#129
- (#5955) - Full Width Quiet Touch Keyboard -- USB, UK English, #166P
- (#5956) - Full Width Quiet Touch Keyboard -- USB, Spanish, #172
- (#5957) - Full Width Quiet Touch Keyboard -- USB, Japanese, #194
- (#5958) - Full Width Quiet Touch Keyboard -- USB, Brazilian
Portuguese, #275
- (#5959) - Full Width Quiet Touch Keyboard -- USB, Hungarian, #208
- (#5960) - Full Width Quiet Touch Keyboard -- USB, Korean, #413
- (#5961) - Full Width Quiet Touch Keyboard -- USB, Chinese, #467
- (#5962) - Full Width Quiet Touch Keyboard -- USB, French Canadian,
#445
- (#5963) - Full Width Quiet Touch Keyboard -- USB, Canadian French,
#058
- (#5964) - Full Width Quiet Touch Keyboard -- USB, Belgian/French,
#120
- (#5965) - Full Width Quiet Touch Keyboard -- USB, Swedish/Finnish,
#153
- (#5966) - Full Width Quiet Touch Keyboard -- USB, Danish, #159
- (#5967) - Full Width Quiet Touch Keyboard -- USB, Bulgarian, #442
- (#5968) - Full Width Quiet Touch Keyboard -- USB, Swiss/French/
German, #150
- (#5969) - Full Width Quiet Touch Keyboard -- USB, Norwegian,#155
- (#5970) - Full Width Quiet Touch Keyboard -- USB, Dutch, #143
- (#5971) - Full Width Quiet Touch Keyboard -- USB, Portuguese, #163
- (#5972) - Full Width Quiet Touch Keyboard -- USB, Greek, #319
- (#5973) - Full Width Quiet Touch Keyboard -- USB, Hebrew, #212
- (#5974) - Full Width Quiet Touch Keyboard -- USB, Polish, #214
- (#5975) - Full Width Quiet Touch Keyboard -- USB, Slovakian, #245
- (#5976) - Full Width Quiet Touch Keyboard -- USB, Czech, #243
- (#5977) - Full Width Quiet Touch Keyboard -- USB, Turkish, #179
- (#5978) - Full Width Quiet Touch Keyboard -- USB, LA Spanish, #171
- (#5979) - Full Width Quiet Touch Keyboard -- USB, Arabic, #253
- (#5980) - Full Width Quiet Touch Keyboard -- USB, Thai, #191
- (#5981) - Full Width Quiet Touch Keyboard -- USB, Russian, #443
- (#5982) - Full Width Quiet Touch Keyboard -- USB, Slovenian, #234
- (#5983) - Full Width Quiet Touch Keyboard -- USB, US English
International, #103P
- (#8800) - Quiet Touch Keyboard - USB, Business Black, US English,
#103P
- (#8801) - Quiet Touch Keyboard - USB, Business Black, French, #189
- (#8802) - Quiet Touch Keyboard - USB, Business Black, Italian, #142
- (#8803) - Quiet Touch Keyboard - USB, Business Black,
German/Austrian, #129
- (#8804) - Quiet Touch Keyboard - USB, Business Black, UK English,
#166
- (#8805) - Quiet Touch Keyboard - USB, Business Black, Spanish, #172
- (#8806) - Quiet Touch Keyboard - USB, Business Black, Japanese, #194
- (#8807) - Quiet Touch Keyboard - USB, Business Black,
Brazilian/Portuguese, #275
- (#8808) - Quiet Touch Keyboard - USB, Business Black, Canadian
French, #058
- (#8810) - Quiet Touch Keyboard - USB, Business Black, Belgian/Dutch,
#120
- (#8811) - Quiet Touch Keyboard - USB, Business Black,
Swedish/Finnish, #153
- (#8812) - Quiet Touch Keyboard - USB, Business Black, Danish, #159
- (#8813) - Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442
- (#8814) - Quiet Touch Keyboard - USB, Business Black,
Swiss/French/German, #150F/G
- (#8816) - Quiet Touch Keyboard - USB, Business Black, Norwegian, #155
- (#8817) - Quiet Touch Keyboard - USB, Business Black, Dutch, #143
- (#8818) - Quiet Touch Keyboard - USB, Business Black, Portuguese,
#163
- (#8819) - Quiet Touch Keyboard - USB, Business Black, Greek, #319
- (#8820) - Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
- (#8821) - Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
- (#8823) - Quiet Touch Keyboard - USB, Business Black, Polish, #214
- (#8825) - Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
- (#8826) - Quiet Touch Keyboard - USB, Business Black, Czech, #243
- (#8827) - Quiet Touch Keyboard - USB, Business Black, Turkish, #179
- (#8829) - Quiet Touch Keyboard - USB, Business Black, LA Spanish,
#171
- (#8830) - Quiet Touch Keyboard - USB, Business Black, Arabic, #238
- (#8833) - Quiet Touch Keyboard - USB, Business Black, Korean, #413
- (#8834) - Quiet Touch Keyboard - USB, Business Black, Chinese/US,
#467
- (#8835) - Quiet Touch Keyboard - USB, Business Black, French
Canadian, #445
- (#8836) - Quiet Touch Keyboard - USB, Business Black, Thai, #191
- (#8838) - Quiet Touch Keyboard - USB, Business Black, Russian, #443
- (#8839) - Quiet Touch Keyboard - USB, Business Black,
Yugoslavian/Latin, #105
- (#8840) - Quiet Touch Keyboard - USB, Business Black, US English
(EMEA), #103P
- Linecords
- (#6470) - Power Cord (6-foot), To Wall (125V, 15A), Plug Type #4
- (#6471) - Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug
Type #70
- (#6472) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
Type #18
- (#6473) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type 19
- (#6474) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 13A), Plug
Type #23
- (#6475) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
Type #32
- (#6476) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type #24
- (#6477) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
Type #22
- (#6478) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
Type #25
- (#6487) - Power Cord (6-foot), To Wall, (250V, 15A), United States,
Plug Type #5
- (#6488) - Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A or 250V,
10A), Plug Type #2
- (#6493) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type #62
- (#6494) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type #69
- (#6495) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type #73
- (#6496) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type #66
- (#6651) - Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug
Type #75
- (#6659) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug
Type #76
- (#6670) - Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59
(DENAN marking)
- (#6680) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
Type #6, Insulated
- (#6687) - Power Cord (6-foot), To Wall, (250V, 15A), Plug Type #57
(DENAN marking)
- Media Devices
- (#1892) - VXA-320 160/320GB Internal Tape Drive
- (#1991) - 36/72GB 4mm Internal Tape Drive
- (#1992) - IBM 80/160 GB Internal Tape Drive with VXA Technology
- (#1993) - IBM 4.7 GB IDE Slimline DVD-RAM Drive
- (#1994) - IDE Slimline DVD-ROM Drive
- (#2591) - External USB 1.44 MB Diskette Drive
- (#2640) - IDE Slimline DVD-ROM Drive
- (#5751) - IBM 4.7 GB IDE Slimline DVD-RAM Drive
- (#6120) - IBM 80/160 GB Internal Tape Drive with VXA Technology
- (#6258) - 36/72GB 4mm Internal Tape Drive
- (#6279) - VXA-320 160/320GB Internal Tape Drive
- Memory
- (#1930) - 1024MB (2x512MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
- (#1931) - 2048MB (2x1024MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
- (#1932) - 4096MB (2x2048MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
- (#1934) - 8192MB (2x4096MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
- Miscellaneous
- (#3752) - Service Package
- (#6585) - DASD Locking Kit
- (#7877) - Media Backplane
- (#8227) - Tie-down Strap Security Device
- (#8422) - SpaceBall 3D Input Device
- (#8423) - Magellan XT 3D Input Device
- (#8424) - SpaceBall 3D Input Device (USB)
- (#8425) - SpaceMouse 3D Input Device (USB)
- (#8841) - Mouse - USB, Business Black with Keyboard Attachment Cable
- Processor
- (#7319) - One Processor Entitlement for Processor Feature # 8327
- (#7320) - One Processor Entitlement for Processor Feature #8330
- (#7336) - One Processor Entitlement for Processor Feature #5326
- (#7339) - One Processor Entitlement for Processor Feature #5327
- (#8402) - Zero-priced Processor Entitlement for #5326
- (#8403) - Zero-priced Processor Entitlement for #5327
- (#8409) - Zero-priced Express Product Offering Processor Entitlement
for #8327
- (#8410) - Zero-priced Express Product Offering Processor Entitlement
for #8330
- Specify Codes
- (#0265) - AIX Partition Specify
- (#9004) - Southern Hemisphere Designator for Monitors
- Tape
- Pointing Device
- (#8426) - SpacePilot 3D Input Device
- (#8845) -USB Mouse
The following is a list of all feature codes in numeric order for the
IBM RS/6000 or pSeries 9111 machine type.
Attributes, as defined in the following feature descriptions, state
the interaction of requirements among features.
Minimums and maximums are the absolute limits for a single feature
without regard to interaction with other features. The maximum valid
quantity for MES orders may be different than for initial orders. The
maximums listed below refer to the largest quantity of these two
possibilities.
The order type defines if a feature is orderable only on initial
orders, only on MES orders, on both initial and MES orders, or if a
feature is supported on a model due to a model conversion. Supported
features cannot be ordered on the converted model, only left on or
removed from the converted model.
(#0050) IBM Express Seller Indicator
This feature is a no-charge feature used for administrative purposes
by IBM and IBM Business Partners.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#0050)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#0265) AIX Partition Specify
This feature number is used to indicate the number of partitions the
system will have running under AIX.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#0265)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX V5.2 or AIX V5.3, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#0983) - US TAA Compliance Indicator
This feature indicates that the product was assembled in a
manufacturing plant in the USA or in a country approved under
the US Trade Agreement Act.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#0983)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Does not apply
- Return parts MES: Does not apply
(#1892) - VXA-320 160/320GB Internal Tape Drive
(No Longer Available as of November 28, 2008)
The IBM 160/320 GB Internal Tape Drive with VXA* Technology is a
5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high
capacity for save/restore and archive functions. The tape drive uses "X"
media VXAtape* data cartridges and is compression capable, providing a
capacity of up to 320 GB - a significant increase in capacity, and data
transfer rate over the previous internal tape drives.
Characteristics
- Capacity: 160 GB native mode
- Capacity: 320 GB compress mode, typical
- Form Factor: 5.25-inch half high
- Media: uses VXAtape "X" media data cartridges
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 12 MBps native mode, 24MBps (typical)
compression
- Interface: SCSI-2,SCSI-3 Ultra 160 (LVD) asynchronous/synchronous
- VXA-320 is read/write capable on X23, X10 and X6 media
- Compatibility: VXA-2 format (Read/Write) on X6, X10, and X23,
VXA-320 format (Read/Write) on X6, X10, and X23.
- Attributes provided: One 160/320GB internal tape drive
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal 16-bit address
- For 9111-285: (#1892)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#1905) - 4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter
(No Longer Available as of May 29, 2009)
The 4 Gigabit Single-Port Fibre Channel PCI-X 2.0 DDR Adapter is a
64-bit address/data, short form factor PCI-X adapter with an LC type
external fiber connector that provides single initiator capability over
an optical fiber link or loop. With the use of appropriate optical fiber
cabling, this adapter provides the capability for a network of high-speed
local and remote located storage. The adapter will auto-negotiate for
the highest data rate between adapter and an attaching device at 1 Gbps,
2 Gbps or 4 Gbps of which the device or switch is capable. Distances up
to 500 meters running at 1 Gbps data rate, up to 300 meters running at 2
Gbps data rate, and 4 Gbps data rate up to 150 meters are supported
between the adapter and an attaching device or switch. When used with
IBM Fibre Channel storage switches supporting long-wave optics, distances
up to 10 kilometers are capable running at either 1 Gbps, 2 Gbps, or 4
Gbps data rates.
The 4 Gigabit Single-Port Fibre Channel PCI-X Adapter can be used to
attach devices either directly, or by means of Fibre Channel Switches.
If attaching a device or switch with a SC type fiber connector(s), use of
an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
There are two maximum quantities for High Bandwidth adapters, one for
performance, and one for connectivity. Adapter performance may be
limited by bandwidth constraints in a network. To maximize High
Bandwidth adapter performance in the server the performance maximum
quantity should not be exceeded. In applications where the end-to-end
network cannot sustain high performance and or connectivity is more
important than overall bandwidth performance the performance maximum
quantity can be exceeded up to the connectivity maximum quantity.
- Connectivity Maximum: (3)
- Performance Maximum: (3)
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.ibm.com/servers/storage/product/products_pseries.html
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 Fibre Channel
- Attributes required: 1 empty PCI or PCI-X 1.0 / 2.0 slot
- For 9111-285: (#1905)
Note: The minimum system firmware level required to operate in Single
Data Rate (SDR) mode is SF235_185. The minimum system firmware level
required to operate in Double Data Rate (DDR) mode is SF240_205.
System firmware can be downloaded from:
http://techsupport.services.ibm.com/server/mdownload2/download.html
(#1907) Dual Channel SCSI RAID Enablement Daughter Card
(No Longer Available as of August 28, 2009)
The Dual Channel SCSI RAID Enablement Card (#1907) is a bootable high
performance SCSI RAID Enablement feature providing RAID 0,5, or 10
capability to select pSeries systems with the appropriate supporting
integrated SCSI adapter and internal multiple disk drives or packs of
drives. To increase the data writing performance, a 40 MByte non-
volatile fast-write cache is provided as a resident part of this feature.
The 40 MByte fast-write cache can provide an improvement in data
throughput and response time during certain sequence write operations
compared to SCSI RAID adapters without the fast-write cache. The
response time and data transfer improvement will vary depending upon the
data block sizes, the percentage of sequential writes, machine
type/model, and application parameters. When an array configuration is
selected with the RAID Manager, the disk drives being designated as part
of the array are required to be formatted to 522 byte sectors. 522 byte
sectors provide additional CRC error checking for improved data
integrity. A menu option is provided in the AIX supporting software
which will reformat these disk drives prior to their usage in an array.
Conversely, when a disk drive is removed from an array, a similar menu
option is also provided to re-format them back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors. Also, there are
some disk drives which do not support being formatted to 522 Byte
Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these
known situations when they exist. For disk microcode updates, go to the
following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Limitation: Even though the supporting integrated adapter with the
Dual Channel SCSI RAID Enablement Card has ports that run at ultra320
SCSI speeds (up to 320 MBytes/s), the internally attached disk drives
will run at a maximum SCSI bus data rate specified by that supporting
system disk backplane.
- Attributes provided: Internal disk drives can be configured as an
array.
- Attributes required: System with supporting integrated SCSI adapter
and disk drives.
- For 9111-285: (#1907)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1910) - 4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter
(No Longer Available as of July 30, 2010)
The 4 Gigabit Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter is a
64-bit address/data, short form factor PCI-X adapter with an LC type
external fiber connector that provides single or dual initiator
capability over an optical fiber link or loop. With the use of
appropriate optical fiber cabling, this adapter provides the capability
for a network of high-speed local and remote located storage. The
adapter will auto-negotiate for the highest data rate between adapter and
an attaching device at 1 Gbps, 2 Gbps or 4 Gbps of which the device or
switch is capable. Between the adapter and an attaching device or
switch, the distances supported are up to: 500 meters running at 1 Gbps
data rate, 300 meters running at 2 Gbps data rate, and 150 meters running
at 4 Gbps data rate. When used with IBM Fibre Channel storage switches
supporting long-wave optics, distances of up to 10 kilometers are capable
running at either 1 Gbps, 2 Gbps, or 4 Gbps data rates.
The 4 Gb Dual-Port Fibre Channel PCI-X Adapter can be used to attach
devices either directly, or by means of Fibre Channel Switches. If
attaching a device or switch with a SC type fiber connector(s), use of an
LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
There are two maximum quantities for High Bandwidth adapters, one for
performance, and one for connectivity. Adapter performance may be
limited by bandwidth constraints in a network. To maximize High
Bandwidth adapter performance in the server the performance maximum
quantity should not be exceeded. In applications where the end-to-end
network cannot sustain high performance and or connectivity is more
important than overall bandwidth performance the performance maximum
quantity can be exceeded up to the connectivity maximum quantity.
- Connectivity Maximum: (3)
- Performance Maximum: (2)
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.ibm.com/servers/storage/product/products_pseries.html
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
Note: Please carefully consider the usage of this card. If placed in
a PCI-X slot rated as SDR compatible and/or has the slot speed of 133
MHz, the AIX value of the max_xfer_size must be kept at the default
setting of 0x100000 (1 megabyte) when both ports are in use. The
architecture of the DMA buffer for these slots does not accommodate
larger max_xfer_size settings.
- Attributes provided: 2 Fibre Channel
- Attributes required: 1 empty PCI or PCI-X 2.0 slot
- For 9111-285: (#1910)
Note: The minimum system firmware level required to operate in Single
Data Rate (SDR) mode is SF235_185. The minimum system firmware level
required to operate in Double Data Rate (DDR) mode is SF240_205.
System firmware can be downloaded from:
http://techsupport.services.ibm.com/server/mdownload2/download.html
(#1912) PCI-X DDR Dual Channel Ultra320 LVD SCSI Adapter
(No Longer Available as of July 30, 2010)
The PCI-X DDR Dual Channel Ultra320 SCSI Adapter (#1912) is a 64-bit
3.3 volt adapter and is an excellent solution for high-performance SCSI
applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two
SCSI channels (busses), each capable of running 320 MBps (max.). Each
SCSI bus can either be internal (on systems that support internal SCSI
device or backplane attachments) or external. Internally attached
Ultra320 devices are designed to run at a data rate of up to 320 MB per
second on systems that have internal backplanes that are capable of
supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
Two VHDCI 68-pin connectors are mounted on the adapter's end bracket
allowing attachment of various LVD and SE external subsystems. A .3
meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be
used with older external SE devices or subsystems to allow connection to
the VHDCI connector on the PCI-X DDR Dual Channel Ultra320 SCSI Adapter.
Two external ports provide connectivity to numerous other SCSI
external subsystems. Check the external subsystem sales/web pages for
verification of connectivity support with this adapter.
The PCI-X Dual Channel Ultra320 SCSI Adapter (#1912) is a native boot
adapter with AIX 5.2L or later software in a supported pSeries or RS/6000
systems. The adapter also supports target mode.
Limitations:
- The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.
- Even though the Dual Channel Ultra320 SCSI nonRAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.
- To obtain microcode update go to the following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices
- Attributes required: One available 3.3 volt PCI or PCI-X slot or
PCI-X 2.0 DDR slot
- For 9111-285: (#1912)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1913) PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter
(No Longer Available as of August 28, 2009)
The PCI-X DDR Dual Channel Ultra320 SCSI RAID LVD only Adapter (#1913)
is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID
Adapter providing RAID 0, 5, 6, or 10 capability, and can address up to
thirty 16-bit SCSI physical disk drives on two independent SCSI buses.
To increase the data writing performance, a 90 MByte non-volatile
fast-write cache is a resident part of this adapter. The 90 MByte fast-
write cache can provide a significant improvement in data throughput and
response time during certain sequence write operations compared to SCSI
RAID adapters without the fast-write cache. The response time and data
transfer improvement will vary depending upon the data block sizes, the
percentage of sequential writes, machine type/model, and application
parameters.
The Dual Channel Ultra320 SCSI RAID Adapter has two independent
ultra320 SCSI buses. There are two internal ports and two external
ports. The two internal ports are shared with the two external ports.
The SCSI busses can drive either an internal port or an external port.
The internal ports can be used to provide an internal RAID solution on
certain supporting pSeries systems with internal multiple disk drives or
packs of drives. Internally attached Ultra320 devices designed to run at
320 MB can run up to 320 MB per second on systems that have internal
backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and maintain a reasonable drive distance, the adapter utilizes Low
Voltage Differential (LVD) drivers and receivers. All attaching devices
should be Ultra320 LVD devices to utilize the 320 MB per second
performance, however, if Ultra2, Ultra3, or Ultra320 devices coexist on
the same bus, each device will operate at its rated speed. This card
does not support single-ended (SE) devices.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array (attached to either the
internal or the external ports) are required to be formatted to 522-byte
sectors. 522-byte sectors provide additional CRC error checking for
improved data integrity. A menu option provide in the AIX supporting
software, which will reformat these disk drives prior to their usage in
an array. Conversely, when a disk drive is removed from an array, a
similar menu option is also provided to re-format them back to 512-byte
sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors. In addition,
there are some disk drives, which do not support 522 Byte Sectors format.
The PCI-X SCSI Disk Array Manager will inform the user of these known
situations when they exist. For disk microcode updates, go to the
following web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Two VHDCI 68-pin connectors are mounted on the adapter's end bracket
allowing attachment of various LVD external subsystems.
Limitations:
- Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.
Minimum System Firmware Required:
System firmware level required is SF235_185 or greater. Firmware
level SF235_185 adjusts the PCI slots to run in Single Data Rate (SDR)
mode. Enablement of Double Data Rate (DDR)slots to run at DDR mode is
planned to be provided in an upcoming firmware enhancement.
For Double Data Rate (DDR), check for firmware upgrade at URL:
- http://techsupport.services.ibm.com/server/mdownload2/download.html
Running the adapter on a system with firmware level lower than
SF235_185 is not supported.
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One PCI or PCI-X DDR bus slot
- For 9111-285: (#1913)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1930) 1024MB (2x512MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
(No Longer Available as of July 29, 2011)
Provides 1024MB of system memory with 2 512MB DIMMs.
- Attributes provided: 1024MB of system memory.
- Attributes required: Two empty memory DIMM positions
- For 9111-285: (#1930)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1931) 2048MB (2x1024MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
(No Longer Available as of July 29, 2011)
Provides 2048MB of system memory with 2 1024MB DIMMs.
- Attributes provided: 2048MB of system memory.
- Attributes required: Two empty memory DIMM positions.
- For 9111-285: (#1931)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1932) 4096MB (2x2048MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
(No Longer Available as of July 29, 2011)
Provides 4096MB of system memory with 2 2048MB DIMMs.
- Attributes provided: 4096MB of system memory.
- Attributes required: Two empty memory DIMM positions.
- For 9111-285: (#1932)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1934) 8192MB (2x4096MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
(No Longer Available as of July 29, 2011)
Provides 8192MB of system memory with 2 4096MB DIMMs.
- Attributes provided: 8192MB of system memory.
- Attributes required: Two empty memory DIMM positions.
- For 9111-285: (#1934)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1954) 4-Port 10/100/1000 Base-TX PCI-X Adapter
(No Longer Available as of November 27, 2009)
The 4-Port 10/100/1000 Base -TX PCI-X adapter is a full height PCI-X
1.0a Ethernet adapter which supports four Gigabit ports on a single
adapter, delivers increased bandwidth for slot-constrained servers, and
is designed to provide high connectivity and reliability using two
integrated, dual-port Gigabit Ethernet controllers.
- Four RJ-45 ports
- 3.3 volts, 64-bit 133 MHz with 64-bit Bus Mastering on the PCI-X bus
- IEEE 802.3ab 1000Base-T compliant
- IEEE 802.3u 100Base-T compliant
- IEEE 802.3 10Base-T compliant
- 802.1q VLAN tagging
- Interrupt Moderation
- TCP Segmentation offload and encapsulation in hardware
- Checksum offloading of IP, TCP, and UDP frame
- Increased connectivity while significantly reducing CPU utilization
- Two LED adapter status indicators per port for link activity and
speed
- NIM is supported on all 4 ports
- RoHS compliant
Limit Full bandwidth performance may not be achieved with more than
one adapter per PCI Host Bridge (PHB) or more than one CPU.
- Attributes provided: Four 10/100/1000 RJ-45 ports
- Attributes required: One available PCI-X card slot
- For 9111-285: (#1954)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1968) 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
(No Longer Available as of May 25, 2007)
The 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.82 ms (based on four(4) READS to one (1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 67 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#1968)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1969) 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
(No Longer Available as of May 25, 2007)
The 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides
146.8 GB of storage capacity and supports the industry standard Ultra320
SCSI interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.94 ms (based on four (4) READS to one (1)
WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 67 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 146.8 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#1969)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1970) 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
(No Longer Available as of February 23, 2007)
The 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4
GB of storage capacity and supports the industry standard Ultra3 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 83 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 36.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#1970)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1971) 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
(No Longer Available as of January 30, 2009)
The 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4
GB of storage capacity and supports the industry standard Ultra3 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 83 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#1971)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1972) 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
(No Longer Available as of August 28, 2009)
The 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides
146.8 GB of storage capacity and supports the industry standard Ultra3
SCSI interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 107 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 146.8 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#1972)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1973) 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
(No Longer Available as of September 14, 2007)
The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.9 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 88 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 300 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#1973)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1974) PCI-X Dual Channel Ultra320 SCSI Adapter
(No Longer Available as of March 31, 2006)
The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a 64-bit 3.3
volt adapter and is an excellent solution for high-performance SCSI
applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two
SCSI channels (busses), each capable of running 320 MBps (max.), up to
twice the maximum data transfer rate of the previous Dual Channel Ultra3
SCSI adapter (160 MBps). Each SCSI bus can either be internal (on
systems that support internal SCSI device or backplane attachments) or
external. Internally attached Ultra320 devices are designed to run at a
data rate of up to 320 MB per second on systems that have internal
backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate. The two external ports also
provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1
Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also
the two external ports provide connectivity to numerous other SCSI
external subsystems. Check the external subsystem sales/web pages for
verification of connectivity support with this adapter.
The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a native boot
adapter with AIX 5.1 or AIX 5.2 software in a supported pSeries or
RS/6000 systems. The adapter also supports target mode.
Limitations:
- The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.
- Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following Web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices
- Attributes required: One available 3.3 volt PCI or PCI-X slot
- For 9111-285: (#1974)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1975) PCI-X Dual Channel Ultra320 SCSI RAID Adapter
(No Longer Available as of March 31, 2006)
The PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5703) is a 64-bit
3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing
RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI
physical disk drives on two independent SCSI buses.
To increase the data writing performance, a 40 MByte non-volatile
fast-write cache is provided as a resident part of this adapter. The 40
MByte fast-write cache can provide a significant improvement in data
throughput and response time during certain sequence write operations
compared to SCSI RAID adapters without the fast-write cache. The
response time and data transfer improvement will vary depending upon the
data block sizes, the percentage of sequential writes, machine
type/model, and application parameters.
The Dual Channel Ultra320 SCSI RAID Adapter has two independent
ultra320 SCSI buses. There are two internal ports and two external
ports. The two internal ports are shared with the two external ports.
The SCSI busses can drive either an internal port or an external port.
The internal ports can be used to provide an internal RAID solution on
certain supporting pSeries systems with internal multiple disk drives or
packs of drives. Internally attached Ultra320 devices are designed to
run at a data rate of up to 320 MB per second on systems that have
internal backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array (attached to either the
internal or external ports) are required to be formatted to 522 byte
sectors. 522 byte sectors provide additional CRC error checking for
improved data integrity. A menu option is provided in the AIX supporting
software which will reformat these disk drives prior to their usage in an
array. Conversely, when a disk drive is removed from an array, a similar
menu option is also provided to re-format them back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors. Also, there are
some disk drives which do not support being formatted to 522 Byte
Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these
known situations when they exist. For disk microcode updates, go to the
following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI RAID Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate configured as either a non-array or
an array of disks Also the two external ports provide non-array
connectivity to numerous other SCSI external subsystems. Check the
external subsystem sales/web pages for verification of connectivity
support with this adapter.
Limitations:
- The two external ports provide connectivity to an IBM 2104-DU3
Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower
at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM
2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage
Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only
non-array configuration support.
- The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.
- Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following Web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One PCI or PCI-X bus slot
- For 9111-285: (#1975)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1976) Dual Channel SCSI RAID Enablement Card
The Dual Channel SCSI RAID Enablement Card (#5709) is a bootable high
performance SCSI RAID Enablement feature providing RAID 0,5, or 10
capability to select pSeries systems with the appropriate supporting
integrated SCSI adapter and internal multiple disk drives or packs of
drives.
To increase the data writing performance, a 16 MByte non-volatile
fast-write cache is provided as a resident part of this feature. The 16
MByte fast-write cache can provide an improvement in data throughput and
response time during certain sequence write operations compared to SCSI
RAID adapters without the fast-write cache. The response time and data
transfer improvement will vary depending upon the data block sizes, the
percentage of sequential writes, machine type/model, and application
parameters.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array are required to be
formatted to 522 byte sectors. 522 byte sectors provide additional CRC
error checking for improved data integrity. A menu option is provided in
the AIX supporting software which will reformat these disk drives prior
to their usage in an array. Conversely, when a disk drive is removed
from an array, a similar menu option is also provided to re-format them
back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors. Also, there are
some disk drives which do not support being formatted to 522 Byte
Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these
known situations when they exist. For disk microcode updates, go to the
following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Limitations:
- Even though the supporting integrated adapter with the Dual Channel
SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up
to 320 MBytes/s), the internally attached disk drives will run at a
maximum SCSI bus data rate specified by that supporting system disk
backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following Web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Internal disk drives to be configured as an
array.
- Attributes required: Systems with supporting integrated SCSI
adapter.
- For 9111-285: (#1976)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#1977) 2 Gigabit Fibre Channel PCI-X Adapter
(No Longer Available as of July 27, 2007)
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data,
short form factor PCI-X adapter with an LC type external fiber connector
that provides single or dual initiator capability over an optical fiber
link or loop. With the use of appropriate optical fiber cabling, this
adapter provides the capability for a network of high speed local and
remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will
auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of
which the device or switch is capable. Distances of up to 500 meters
running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data
rate are supported between the adapter and an attaching device or switch.
When used with IBM supported Fibre Channel storage switches supporting
long-wave optics, distances of up to 10 kilometers are capable running at
either 1 Gps or 2 Gps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach
devices either directly, or by means of Fibre Channel Switches. If
attaching a device or switch with a SC type fiber connector(s), use of an
LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
Note: Requires AIX V5.2 or later, if AIX V5.1 or SLES 8 is required order
Feature Code #6239-2 Gigabit Fibre Channel PCI-X Adapter
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 Fibre Channel/FC-AL interface
- Attributes required: 1 empty PCI or PCI-X slot
- For 9111-285: (#1977)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1978) IBM Gigabit Ethernet-SX PCI-X Adapter
(No Longer Available as of May 29, 2009)
The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000
Base-SX) full-duplex Ethernet LAN connection with throughput on a
standard shortwave multimode optical cable which conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
Note: For optimum performance, the adapter should be placed in a 64 bit
PCI-X card slot.
Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#1978) incorporates an
LC type connector on the card. This new, smaller form factor connector
is being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half Duplex (HDX) mode is not supported.
- Attributes provided: One full-duplex 1000Base-SX fiber connection to
a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 9111-285: (#1978)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1979) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
(No Longer Available as of May 29, 2009)
The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex
Gigabit Ethernet adapter designed with highly integrated components.
This adapter can be configured to run at 10, 100, or 1000 Mbps data
rates. The adapter interfaces to the system via the PCI-X bus and
connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair
(UTP) cable for distances of up to 100m. AIX Network Install Manager
(NIM) boot capability is supported with this adapter. The adapter
conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also
supports jumbo frames when running at the 1000 Mbps speed.
Note: For optimum performance, adapter should be placed in a 64 bit PCI-X
card slot.
Limitations: The 1000 Mbps speed is not supported in Half Duplex
(HDX) mode.
- Attributes provided: One full-duplex 10/100/1000Base-TX UTP
connection to a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 9111-285: (#1979)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1980) POWER GXT135P Graphics Accelerator with Digital Support
(No Longer Available as of November 27, 2009)
The POWER GXT135P is a versatile, low-priced 2D graphics accelerator
for RS/6000 workstations and pSeries servers. It can be configured to
operate in either 8-bit or 24-bit color modes. This adapter supports
both analog and digital monitors. Its predecessor, Feature Number 2848,
supported only analog monitors.
- Hardware Description
- 128-bit graphics processor
- 8-bit CLUT or 24-bit true color
- 16 MB SDRAM
- 32-bit PCI interface
- Universal PCI (5.0v or 3.3v)
- 1 hardware color map
- Features Supported
- Up to approximately 16.7 million colors
- Rectangular clipping
- 2 analog monitor outputs at up to 1280 x 1024 resolution
- 1 analog monitor output at up to 2048 x 1536 resolution
- 1 digital monitor output at up to 1600 x 1200 resolution
- 60 to 85 Hz refresh rates (ISO 9241, Part 3)
- APIs Supported
- X-Windows and Motif
- UMS 2.3.0 (no hardware scaling)
- Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital
support),or later, or AIX 4.3 (analog support only)
- Attributes provided: 2D Graphics
- Attributes required: 1 PCI slot
- For 9111-285: (#1980)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1981) 10 Gigabit Ethernet -SR PCI-X Adapter
(No Longer Available as of May 31, 2006)
Provides 10 Gigabit Ethernet PCI-X based server connections. Supports
distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um
multimode fiber with 2000MHz km minimum model bandwidth at 850 nm.
Adapter connector type is LC.
- Attributes provided: Provides highend bandwidth for networking
- Attributes required: Supported on PCI-X slots only
- For 9111-285: (#1981)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1982) IBM 10 Gigabit Ethernet-LR PCI-X Adapter
(No Longer Available as of May 31, 2006)
Offers 10 Gigabit Ethernet PCI-X based server connections over a
maximum of 10 kilometers of 1310nm single-mode fiber optic cable. The
adapter conforms to the IEEE 802.3ae standard. The adapter requires 9um
single-mode fiber optic cables and uses a SC connector type for
connecting into net-work infrastructure components like 10 Gigabit
Ethernet switch/router with SC connectors.
- Attributes provided: 10 Gigabit Ethernet connections
- Attributes required: Available PCI-X slot
- For 9111-285: (#1982)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1983) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
(No Longer Available as of May 27, 2011)
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full
Duplex, dual ported, Gigabit Ethernet adapter designed with highly
integrated components. This adapter can be configured to run each port
at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the
system via a PCI or PCI-X bus and connects to a network using a 4-pair
CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m.
AIX Network Install Manager (NIM) boot capability is supported with this
adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard.
The adapter also supports jumbo frames when running at the 1000 Mbps
speed.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#1983)
should be considered where maximum port density is required per I/O card
slot. For a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM 10/100/1000 Base-TX
Ethernet PCI-X Adapter (#1979) is the preferred solution.
Note: For optimum performance, the adapter should be placed in a 64 bit
PCI-X card slot whenever possible.
Limitations: The 1000 Mbps speed is not supported in Half Duplex
(HDX) mode.
- Attributes provided: Two full-duplex 10/100/1000Base-TX UTP
connections to Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 9111-285: (#1983)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1984) IBM 2-PORT Gigabit Ethernet-SX PCI-X Adapter
(No Longer Available as of May 29, 2009)
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps
(1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a
standard shortwave multimode optical cable that conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#1984) should be
considered where maximum port density is required per I/O card slot. For
a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM Gigabit Ethernet-SX
PCI-X Adapter (#1978) is the preferred solution.
Note: For optimum performance, the adapter should be placed in a 64 bit
PCI-X card slot whenever possible.
Note: The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter incorporates an LC
type connector on the card. This new, smaller form factor connector is
being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half Duplex (HDX) mode is not supported.
- Attributes provided: Two full-duplex 1000Base-SX fiber connections
to a Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 9111-285: (#1984)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1985) 10/100 Mbps Ethernet PCI Adapter II
The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single
port PCI ethernet adapter. This high performance, low power ethernet
10/100Mbps LAN adapter can be used in both client and server PCI systems.
The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and
100Base-TX full duplex ethernet LAN connectivity. The adapter supports
Category-5 unshielded twisted pair cabling for both 10/100 Mbps and
Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps
Ethernet PCI Adapter II supports:
- Half / Full Duplex 10/100 Mbps Ethernet interface
- 10/100 Mbps data rates
- Auto-negotiation for 10/100 speed and half/full duplex
- Network boot capability and Network Install Manager (NIM)
- IEEE 802.3 Ethernet Specification
- IEEE 802.3u Fast Ethernet Specification
After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the
off-load of IP Security cryptographic algorithms by providing hardware
assistance in performing data encryption and authentication. This
support is provided with AIX 5.1 (with appropriate software updates)and
later software. This IP Security function, normally performed with
encryption software by the host, is off-loaded to this adapter to enhance
network traffic throughput and reduce CPU utilization. If you are
running with AIX 5.1, to invoke the IP Security function on the adapter,
you must obtain AIX 5.1 software updates IY27069 and IY26514 or the
5100-02 Recommended Maintenance package. These updates can be obtained
by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD
(LCD4-1103-03) dated 4/2002 or later.
Note: This IP Security function is not supported with AIX 4.3 software.
An additional function called 'Large Send' or sometimes known as TCP
Segmentation is also available. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also available. Both these functions are
available with AIX version 5.1 with APAR IY38248 or later software, or
AIX version 5.2 with APAR IY38492 or later software.
- Attributes provided: One 10/100 Mbps Ethernet port (connector)
- Attributes required: One PCI slot
- For 9111-285: (#1985)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#1986) 1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter
(No Longer Available as of July 30, 2010)
The 1 Gigabit iSCSI TOE PCI-X adapter encapsulates SCSI Commands and
data into TCP and transports them over the Ethernet via IP packets. The
adapter operates as an iSCSI TOE (TCP/IP Offload Engine). This offload
function eliminates host protocol processing and reduces CPU interrupts.
Adapter uses RJ45 Gigabit Ethernet connector.
- Attributes provided: Offload of host protocol processing
- Attributes required: Available PCI-X Slot
- For 9111-285: (#1986)
(#1987) 1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter
(No Longer Available as of November 28, 2008)
The 1 Gigabit iSCSI TOE PCI-X adapter encapsulates SCSI Commands and
data into TCP and transports them over the Ethernet via IP packets. The
adapter operates as an iSCSI TOE (TCP/IP Offload Engine). This offload
function eliminates host protocol processing and reduces CPU interrupts.
Adapter uses Small form factor LC type fiber optic connector.
- Attributes provided: Offload of host protocol processing
- Attributes required: Available PCI-X Slot
- For 9111-285: (#1987)
(#1991) 36/72 4mm Internal Tape Drive
(No Longer Available as of May 29, 2009)
The 36/72 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high,
single-ended 16-bit tape drive, which provides a high capacity for
save/restore and achieve functions. This tape drive uses IBM 4-mm
data cartridges and is compression capable, providing a capacity of
up to 72 GB - a significant increase in capacity over the previous
20/40 4-mm internal tape drives (when using DDS-4 media).
Characteristics:
- Capacity: 36 GB native mode, 72 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression
- Interface: SCSI-2 (LVD) asynchronous/synchronous
- Media Formats Supported:
- DDS3 12GB (R/W)
- DDS4 20GB (R/W)
- DAT72 36GB (R/W)
- Compatibility:
- 12GB mode (Read/Write), 24GB compression (Read/Write)
- 20GB mode (Read/write), 40GB compression (Read/Write)
- 36GB mode (Read/Write), 72GB compression (Read/Write).
Note: MES orders are shipped with black bezel.
- Attributes provided: 4mm tape capability
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal SE 16-bit address
- For 9111-285: (#1991)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#1992) IBM 80/160 GB Internal Tape Drive with VXA Technology
(No longer available as of February 29, 2008)
The IBM 80/160 GB Internal Tape Drive with VXA* Technology is a
5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high
capacity for save/restore and achieve functions. This tape drive uses
VXAtape* data cartridges and is compression capable, providing a capacity
of up to 160 GB - a significant increase in capacity over the previous
internal tape drives.
Characteristics
- Capacity: 80 GB native mode, 160 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: uses VXAtape data cartridges
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression
- Interface: SCSI-2 (LVD/SE) asynchronous/synchronous
- Compatibility: 80 GB mode (Read/Write), 160 GB compression
(Read/Write)
- Attributes provided: One 80/160 GB internal tape drive
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal 16-bit address
- For 9111-285: (#1992)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#1993) IBM 4.7 GB IDE Slimline DVD-RAM Drive
(No Longer Available as of May 29, 2009)
The IBM 4.7 GB IDE Slimline DVD-RAM Drive is an internal tray loading,
multifunction storage device capable of reading and writing 4.7GB DVD-RAM
discs as well as reading a multitude of other optical media discs. This
drive also reads Type II (removable from cartridge) DVD-RAM discs. It is
a 12.7mm high Slimline form factor, multi-session capable, DVD-RAM drive
which provides state of the art performance. System boot and install
functions are supported with CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer
diameter; 10.8MB/sec read (8X DVD-ROM); 2.7MB/sec write (2X DVD-RAM) and
2.7MB/sec read (2X DVD-RAM)
- Interface: Parallel IDE
- Average Random Access Time: 150ms CD-ROM; 180ms DVD-ROM; 229ms
DVD-RAM
- Buffer Memory: 2MB
- High-speed burst rate of 16/16/33 MB/second for PIO / MDMA / UDMA
transfers respectively
- Loading tray accommodates both 8cm discs and 12cm discs.
- Operates in either vertical or horizontal position
- Reads multi-session discs
- Reads CD-ROM, CD-R, CD-RW, DVD-ROM, & DVD-RAM discs.
- Reads 2.6GB DVD-RAM media; reads and writes 4.7GB and 9.4GB double
sided) DVD-RAM media
- Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA
and audio
Limitations:
- DVD video is not supported.
- Drive only reads CD-type formatted media with AIX 5.1.
- Attributes provided: One 4.7GB IDE Slimline DVD-RAM Drive
- Attributes required: One IDE 12.7mm high media bay
- For 9111-285: (#1993)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1994) IDE Slimline DVD-ROM Drive
(No Longer Available as of May 29, 2009)
The 8X/24X(max) Slimline IDE DVD-ROM Drive is an internal tray loading
DVD-ROM drive providing up to 3600KB/sec (CD-ROM) and 10.3MB/sec
(DVD-ROM) data transfer rates. It is a 12.7mm Slimline form factor
multi-session capable, DVD-ROM drive which provides state of the art
performance and supports existing 650MB CD-ROM, 4.7 GB DVD-ROM, and 9.4
GB DVD-ROM (double-sided) discs. This drive also reads Type II
(removable from cartridge) DVD-RAM discs at DVD-ROM speeds. System boot
and install functions are supported with CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: CD-ROM=3600 KB/sec (max):
DVD-ROM=10.3MB/sec (max)
- Interface: IDE/ATAPI
- Avg. Random Access Time: CD-ROM=95ms(typical);
DVD-ROM=150ms(typical)
- Buffer Memory: 256KB
- Media capacity: CD-ROM=650MB; DVD-ROM= 4.7 GB(single sided); 9.4
GB(double-sided)
- Multisession capable (Reads CD/R & CD-R/W media)
- 12.7mm Slimline form factor
- Operates in either vertical or horizontal positions
- Interface supports standard and extended XA formats
- Loading tray supports 12cm and 8cm disks
Limitations:
- DVD video is not supported.
- DVD-ROM only reads CD-type formatted media with AIX 5.1.
- Attributes provided: 8X/24X(max) IDE DVD-ROM Drive
- Attributes required: 1 Slimline media bay
- For 9111-285: (#1994)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#1997) - 200/400GB Half High Ultrium 2 Tape Drive
(No Longer Available as of November 27, 2009)
The IBM 200/400GB Half High Ultrium 2 Tape Drive is a 5.25-inch, half-
high, Low Voltage Differential(LVD) 16-bit tape drive, which provides a
high capacity for save/restore and achieve functions. This tape drive
uses IBM Ultrium 1 and Ultrium 2 data cartridges and is compression
capable, providing a typical capacity of up to 400GB.
Characteristics:
- Capacity: 200 GB native and typical 400 GB capacity with 2:1
compression.
- Form Factor: 5.25-inch half high
- Media: Half High Ultrium 2 Tape Drive supports Ultrium 1 and Ultrium
2 data cartridges.
- Operation: Streaming
- Data Transfer Rate: 24MBps native mode, 48MBps with 2:1 compression.
- The IBM 200/400GB Half High Ultrium 2 Tape Drives can read and write
original LTO Ultrium Data Cartridges at original Ultrium 1 capacities at
up to 16 MB/sec native(32 MB/sec with 2:1 compression).
- Interface: SCSI Ultra-160,LVD Ultra-80, and Single-ended SCSI
- Compatibility: Ultrium 1 (Read/Write), Ultrium 2 (Read/Write)
- Attributes provided: Ultrium 1 and Ultrium 2 tape capability
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal LVD 16-bit address
- For 9111-285: (#1997)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
Note: We recommend that you do not install server in an office
environment. Run tape backup during off-hours.
(#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable
(No Longer Available as of June 23, 2006)
- Attributes provided: Attachment of multiple hosts to the PCI SCSI-2
differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 9111-285: (#2114)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2118) Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
(No Longer Available as of June 23, 2006)
0.3M 16-bit SCSI cable used to convert from a Mini-68 pin VHDCI
connector to a 68-pin P style connector. Cable has male Mini-68 pin
VHDCI connector on one end and a female 68 pin P style connector on the
other. Length = 0.3 meters.
- Attributes provided: Attachment of supported external sub-system to
integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector.
- Attributes required: None
- For 9111-285: (#2118)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2424) 0.6M 16-bit SCSI-2 System to System Cable
This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
- Attributes provided: 0.6 meter SCSI cable with 68-pin connectors at
each end
- Attributes required: 68-pin SCSI Interface
- For 9111-285: (#2424)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#2425) 2.5M 16-bit SCSI-2 System-to-System Cable
(No Longer Available as of June 23, 2006)
This cable provides a 16-bit connection between any two differential
or single ended SCSI devices having 68-pin connectors. It can be used to
attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
- Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at
each end
- Attributes required: 68-pin SCSI Interface
- For 9111-285: (#2425)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2456) LC-SC 50 Micron Fiber Converter Cable
The 50 micron fiber cable is used to convert from LC type to SC type
connectors. The 2 meter cable has a male LC type connector on one end
and a female SC type connector on the other.
- Attributes provided: Attachment to external 50 micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.
- Attributes required: None
- For 9111-285: (#2456)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2459) LC-SC 62.5 Micron Fiber Converter Cable
The 62.5 micron fiber cable is used to convert from LC type to SC type
connectors. The 2 meter cable has a male LC type connector on one end
and a female SC type connector on the other.
- Attributes provided: Attachment to external 62.5 micron fabric or
device with one type fiber connector to an adapter with the other type
fiber connector.
- Attributes required: None
- For 9111-285: (#2459)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2591) External USB 1.44 MB Diskette Drive
(No Longer Available as of August 28, 2009)
The externally attached USB diskette drive provides storage capacity
up to 1.44 MB on a high density (2HD) floppy disk and 720 KB on a double
density floppy disk. Includes 350mm (13.7 in) captured cable with
standard USB connector.
Limitation:
- Maximum 1 USB diskette per adapter,
- Up to 1 Keyboard and Mouse also supported on the adapter with the
diskette drive at the same time
- No system boot capability
- Not to be operated upside down or with eject button down
Characteristics:
- Capacity - 1.44 MB (2HD disk) or 720 KB (double density disk)
- Physical Dimensions: Width=103mm (4.05 in), Height=17.6mm (.69 in),
Depth=141.8mm (5.58 in)
- Color: Black
- Data Rate: 12 Mbits/sec
- Max Power Consumption: 2.36 Watt (seek)
- Operates in all positions except those noted in the limitations above
- Attributes provided: External diskette drive
- Attributes required: 1 available USB port
- For 9111-285: (#2591)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2640) IDE Slimline DVD-ROM Drive
The 8X/24X(max) Slimline IDE DVD-ROM Drive is an internal tray loading
DVD-ROM drive providing up to 3600KB/sec (CD-ROM) and 10.3MB/sec
(DVD-ROM) data transfer rates. It is a 12.7mm Slimline form factor
multi-session capable, DVD-ROM drive which provides state of the art
performance and supports existing 650MB CD-ROM, 4.7 GB DVD-ROM, and 9.4
GB DVD-ROM (double-sided) discs. This drive also reads Type II
(removable from cartridge) DVD-RAM discs at DVD-ROM speeds. System boot
and install functions are supported with CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: CD-ROM=3600 KB/sec (max):
DVD-ROM=10.3MB/sec (max)
- Interface: IDE/ATAPI
- Avg. Random Access Time: CD-ROM=95ms(typical);
DVD-ROM=150ms(typical)
- Buffer Memory: 256KB
- Media capacity: CD-ROM=650MB; DVD-ROM= 4.7 GB(single sided); 9.4
GB(double-sided)
- Multisession capable (Reads CD/R & CD-R/W media)
- 12.7mm Slimline form factor
- Operates in either vertical or horizontal positions
- Interface supports standard and extended XA formats
- Loading tray supports 12cm and 8cm disks
Limitations:
- DVD video is not supported.
- DVD-ROM only reads CD-type formatted media with AIX 5.1.
- Attributes provided: 8X/24X(max) IDE DVD-ROM Drive
- Attributes required: 1 Slimline media bay
- For 9111-285: (#2640)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#2738) 2-Port USB PCI Adapter
(No Longer Available as of November 27, 2009)
The 2 Port USB PCI Adapter is a USB 2.0 capable adapter that provides
for the connection of one USB keyboard and mouse. Limitation: Limited
to USB 1.1 support with AIX
- Attributes provided: USB Keyboard/Mouse Attachment
- Attributes required: One available PCI slot
- For 9111-285: (#2738)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2842) POWER GXT4500P Graphics Accelerator
(No Longer Available as of January 2, 2009)
IBM POWER GXT4500P -- Entry, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
- Digital monitor support
The GXT4500P Graphics Accelerator is a 64-bit entry 3D PCI Graphics
adapter. The graphics subsystems provide excellent functionality and
performance for demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for
automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer
- 24 Bit Double Buffered up to 2048 x 1536
- 24-Bit Double Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4/8 Bit Overlay
- 8 Bit Double Buffered Alpha
- 8 bit Stencil
- 8 windows ID bits
- 4 Clipping Planes
- Scissor Registers
- 5 HW Rectangular Clippers
- Texture Mapping
- up to 110MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- 4 Hardware Color Maps
API support - X11, graPHIGS, OpenGL 1.2
Monitor Support
- Resolutions Supported: 8/16/24 bit (up to 2048 x 1536 @ 60Hz)
- DDC2B support
- ISO 9241 Compliant
Software Requirements: AIX Version 4.3.3 or 5.1, or later
The GXT4500P is packaged on a standard single-slot PCI card. The PCI
interface is 64-bit, up to 66 MHz and 5.0 v or 3.3v. There are no
options.
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 32 or 64-bit slot, 5.0v or 3.3v
- For 9111-285: (#2842)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2843) POWER GXT6500P Graphics Accelerator
(No Longer Available as of January 2, 2009)
IBM POWER GXT6500P -- Mid-range, 3D 64-bit PCI graphics accelerator
- Attachment via a single 64-bit or 32-bit PCI bus slot
- Geometry Accelerator on-board delivering highest ever IBM 3D graphics
performance
- Native support for OpenGL and graPHIGS 3D APIs
- Advanced 3D texture mapping
- Digital monitor support
The GXT6500P Graphics Accelerator is a 64-bit mid-range 3D PCI
Graphics adapter. The graphics subsystems provide excellent
functionality and performance for demanding graphics applications in:
- Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for
automotive and aerospace
- Petroleum exploration and production
- Scientific Visualization
- LifeScience Visualization
- Other technical design and visualization
This adapter has the following base features:
- 128MB Unified Frame Buffer
- 24 Bit Double Buffered up to 2048 x 1536
- 24-Bit Double Buffered Stereo up to 1280 x 1024
- 24-Bit Z-Buffer
- 4/8 Bit Overlay
- 8 Bit Double Buffered Alpha
- 8 bit Stencil
- 8 windows ID bits
- 4 Clipping Planes
- Texture Mapping
- up to 110MB Texture Memory (1280 x 1024)
- Dual Texture
- 3D texture
- 4 Hardware Color Maps
- Full OpenGL, graPHIGS Geometry Accelerator
API support - X11, graPHIGS, OpenGL 1.2.1
Monitor Support
- Resolutions Supported: 8/24 bit (up to 2048 x 1536 @ 60Hz)
- Digital Monitor Support (up to 1600 x 1200 @ 60Hz)
- DDC2B support
- ISO 9241 Compliant
Software Requirements: AIX Version 4.3.3 or 5.1. or later
The GXT6500P is packaged on a standard single-slot PCI card. The PCI
interface is 64-bit, up to 66 MHz and 5.0 v or 3.3v. There are no
options.
- Attributes provided: 3D Graphics
- Attributes required: 1 long PCI 32 or 64-bit slot, 5.0v or 3.3v
- For 9111-285: (#2843)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2849) POWER GXT135P Graphics Accelerator with Digital Support
The POWER GXT135P is a versatile, low-priced 2D graphics accelerator
for RS/6000 workstations and pSeries servers. It can be configured to
operate in either 8-bit or 24-bit color modes. This adapter supports
both analog and digital monitors. Its predecessor, Feature Number 2848,
supported only analog monitors.
- Hardware Description
- 128-bit graphics processor
- 8-bit CLUT or 24-bit true color
- 16 MB SDRAM
- 32-bit PCI interface
- Universal PCI (5.0v or 3.3v)
- 1 hardware color map
- Features Supported
- Up to approximately 16.7 million colors
- Rectangular clipping
- 2 analog monitor outputs at up to 1280 x 1024 resolution
- 1 analog monitor output at up to 2048 x 1536 resolution
- 1 digital monitor output at up to 1600 x 1200 resolution
- 60 to 85 Hz refresh rates (ISO 9241, Part 3)
- APIs Supported
- X-Windows and Motif
- UMS 2.3.0 (no hardware scaling)
- Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital
support),or later, or AIX 4.3 (analog support only)
- Attributes provided: 2D Graphics
- Attributes required: 1 PCI slot
- For 9111-285: (#2849)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#2861) ARTIC960Hx 4-Port EIA-232 Cable
(No Longer Available as of August 25, 2006)
- Attributes provided: 4-port EIA-232 cable for (#2947)
- Attributes required: One #2947 adapter
- For 9111-285: (#2861)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2863) ARTIC960Hx 4-Port X.21 Cable
(No Longer Available as of August 25, 2006)
- Attributes provided: 4-port X.21 cable for (#2947)
- Attributes required: One #2947 adapter
- For 9111-285: (#2863)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable
(No Longer Available as of August 25, 2006)
- Attributes provided: 4-port X.35 (DTE) cable for (#2947)
- Attributes required: One #2947 adapter
- For 9111-285: (#2864)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2934) Asynchronous Terminal/Printer Cable EIA-232
The Asynchronous Printer/Terminal Cable is used for attaching
printers, plotters, and terminals that support the EIA-232 standard to
any asynchronous adapter. This cable is the equivalent of the
combination of FC 2936 (modem cable) and FC 2937 (printer/terminal
interposer) and replaces this method of printer/terminal attachment.
This cable is 3m (9.8 feet) long, uses DB25 connectors and is
supported on all RS/6000 systems using any asynchronous ports. It is
used in conjunction with:
- FC 2931 (8-port Async Adapter EIA232, ISA bus)
- FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136)
- Attributes provided: EIA232 device attachment capability
- Attributes required: Any RS/6000 Asynchronous port
- For 9111-285: (#2934)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2936) Asynchronous Cable EIA-232/V.24
Used to attach a modem to the standard I/O ports with the 10-pin to
25-pin converter cable (#3925), 8-port Cable Assembly, 16-Port Cable
Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to DB-25
Converter Cable feature #6402) or the 16-Port EIA-232 Remote Async Node
(with RJ45 to DB25 Converter Cable feature #8133). The cable is 3 meters
(9.8 feet) in length.
- Attributes provided: Modem attachment to async or serial port
- Attributes required: Async or serial port
- For 9111-285: (#2936)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
(No Longer Available as of November 27, 2009)
For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All
eight ports are software programmable to support either EIA-232E or
RS-422A protocols, at up to 230K baud.
- Attributes provided: 8 Async ports
- Attributes required: One PCI slot
- For 9111-285: (#2943)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2944) 128-Port Asynchronous Controller, PCI bus
The 128-Port Async Adapter subsystem provides attachment for a high
concentration of asynchronous lines (up to 128) from a single PCI bus
slot. This gives the system the ability to serve a large number of user
of EIA-232 or RS-422 devices such as terminals, printers, and modems.
Two 2.4 Mbps synchronous channels link the adapter to a maximum of
eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to
each synchronous channel.
RANs can also be used with this adapter. If these RANs are connected
the synchronous channel the data rate drops down to 1.2 Mbps. For the
best results keep the previous and new RAN's on separate synchronous
channels.
- Attributes provided: Up to 128 Async Ports
- Attributes required: One PCI slot, One to eight (#8137) or (#8138)
- For 9111-285: (#2944)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
(No Longer Available as of October 13, 2006)
The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one-
slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of:
EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of
up 2.0M bps. Software support is provided by ARTIC960 Support for AIX,
Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC
and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that
provide AIXLink X.25 LPP Version 1.1.5 support.
Note: This adapter may have AIX 5.1 support limitations. Go to the
following URL to view the latest AIX 5.1 support limitation statements.
http://www.ibm.com/servers/aix/os/adapters/51.html
- Attributes provided: One to four WAN connections at up to 2.0Mbps
- Attributes required: One full length 32-bit PCI slot, AIX Version
4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5,
4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support).
- For 9111-285: (#2947)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#2951) Cable, V.24 / EIA-232
(No Longer Available as of May 31, 2006)
V.24 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- Attributes provided: V.24 Cable
- Attributes required: #2962 Adapter
- For 9111-285: (#2951)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required:
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#2952) Cable, V.35
(No Longer Available as of May 31, 2006)
V.35 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- Attributes provided: V.35 Cable
- Attributes required: #2962 Adapter
- For 9111-285: (#2952)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#2953) Cable, V.36 / EIA-499
(No Longer Available as of May 31, 2006)
V.36/EIA-499 cable for use with #2962 - 2-Port Multiprotocol Adapter.
Maximum of two cables per #2962.
- Attributes provided: V.36 Cable
- Attributes required: #2962 Adapter
- For 9111-285: (#2953)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#2954) Cable, X.21
(No Longer Available as of May 31, 2006)
X.21 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum
of two cables per #2962.
- Attributes provided: X.21 Cable
- Attributes required: #2962 Adapter
- For 9111-285: (#2954)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#2962) 2-Port Multiprotocol PCI Adapter
(No Longer Available as of May 31, 2006)
This adapter provides high-speed connections between stand-alone
system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI
Adapter connects via external communications equipment including Channel
Service Units (CSU), Data Service Units (DSU), or through synchronous
modems.
This adapter together with IBM AIXlink/X.25 provides a two-port
connection to X.25 packet switched networks. IBM AIXlink/X.25 is a
separately orderable LPP (5696-926).
2-Port Multiprotocol PCI Adapter with an appropriate cable is
compatible with:
- X.21 DCE - Using 2-Port Cable, X.21 (#2954)
- CCITT X.21 Signalling
- CCITT V.11 Electrical
- CCITT X.27 Electrical
- EIA-422-A Electrical
- ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable
- V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951)
- CCITT V.24 Signalling
- CCITT V.28 Electrical
- CCITT X.21bis Electrical and Signalling
- EIA-232-C Electrical and Signalling
- ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable
- V.35 DCE - Using 2-Port Cable, V.35 (#2952)
- CCITT V.35 Some signals for signalling
- CCITT V.28 Some signals for electrical and signalling
- ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable
- V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953)
- CCITT V.10 Electrical
- CCITT V.11 Electrical
- Attributes provided: Two high speed WAN connections
- Attributes required: One PCI slot
- For 9111-285: (#2962)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#3124) Serial to Serial Port Cable for Drawer/Drawer
This 3.7 meter cable is available to provide a null-modem connection
between the serial ports of two system drawers that are mounted within
the same rack. The cable provides a DB25 female connector at each end.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#3124)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3125) Serial-to-Serial Port Cable for Rack/Rack
This 8 meter cable is available to provide a null-modem connection
between the serial ports of two system drawers that are mounted in
separate racks. The cable provides a DB25 female connector at each end.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#3125)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3274) 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.82 ms (based on four (4) READS to one (1)
WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 67 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#3274)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#3275) 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides
146.8 GB of storage capacity and supports the industry standard Ultra320
SCSI interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.94 ms (based on four (4) READS to one (1)
WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 67 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 146.8 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#3275)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#3277) 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4
GB of storage capacity and supports the industry standard Ultra3 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 83 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 36.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#3277)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#3278) 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4
GB of storage capacity and supports the industry standard Ultra3 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate: 83 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 73.4 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#3278)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#3279) 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides
146.8 GB of storage capacity and supports the industry standard Ultra3
SCSI interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate:107 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 146.8 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#3279)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#3578) 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300
GB of storage capacity and supports the industry standard Ultra320 SCSI
interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 4.9 ms (based on four (4) READS to one (1) WRITE)
- Average Latency: 2.99 ms
- Rotational Speed: 10,000 RPM
- Maximum Data Transfer Rate: 88 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI
cable/backplane in order for the drive to run at 320 MBps. Also, any and
all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3,
or Ultra320 SCSI device(s) in order for this disk drive to run at 320
MBps.
- Attributes provided: 300 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 9111-285: (#3578)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#3585) - 300 GB 15K RPM SCSI Disk Drive
(No Longer Available as of January 30, 2009)
The 300 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides
300 GB of storage capacity and supports the industry standard Ultra3
SCSI interface speed of up to 320 MBps.
Characteristics:
- Form Factor: 3.5-inch, 1-inch (25 mm) high
- Cable included: No
- External Interface: Ultra320 SCSI (16-bit, Low Voltage
Differential)
- Attachment Industry Spec: SCSI U320
- Average Seek Time: 3.7 ms (based on four(4) READS to one(1)
WRITE)
- Average Latency: 2 ms
- Rotational Speed: 15,000 RPM
- Maximum Data Transfer Rate:107 MBps
Limitation: This disk drive requires attachment to a supported
Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/
backplane in order for the drive to run at 320 MBps. Also, any and all
other SCSI
devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320
SCSI device(s) in order for this disk drive to run at 320 MBps.
- Attributes provided:
300 GB of disk storage
- Attributes required:
one disk drive bay
- For 9111-285: (#3585)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required:
Refer to the Server System OS level requirements if attaching to
native SCSI adapters or the OS level required by the attaching SCSI
adapter as appropriate.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable
The P260/P275 monitor has the following general characteristics:
- Business black color
- 21-inch Flat Trinitron** CRT with a viewable image size of 503 mm
(19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch
for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum
addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.
Note: The P260 and P275 monitors are functionally equivalent.
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 9111-285: (#3628)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#3636) L200P Flat Panel Monitor
(No Longer Available as of June 16, 2006)
The L200p flat-panel monitor has the following general
characteristics:
- Business black color
- 20.1-inch TFT LCD digital screen with a viewable image size of 510 mm
(20.1 inches) measured diagonally, incorporating a 0.255 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in
digital mode.
- Tilt/swivel stand
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 9111-285: (#3636)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3637) IBM T541H /L150p 15" TFT Color Monitor
(No Longer Available as of June 16, 2006)
Both the T541H and L150p monitors have the following general
characteristics:
- Business Black color
- 15-inch TFT LCD digital screen with a viewable image size of 381 mm
(15.0 inches) measured diagonally, incorporating a 0.297 mm pixel
pitch/type for bright, high-definition images.
- Designed to provide flicker free operation at a maximum resolution of
1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in
digital mode.
- Tilt/swivel stand
- Supports 2D Graphics Adapters only
- Attributes provided: Color Flat-panel Monitor
- Attributes required: 2D Graphics Adapter
- For 9111-285: (#3637)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3638) IBM C220p 21-inch Color Monitor, Business Black, and Cable
The IBM C220p monitor has the following general characteristics:
- Business black color
- 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508
mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel
pitch for bright, high-definition images.
- Designed to provide reduced flicker operation at an optimum and
maximum supported addressability of 1600 x 1200 pels at up to 85 Hz
(Vesa) non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).
- Tilt/swivel stand
- Dual input allows attachment to two systems concurrently.
- Depth: 483.6 mm (19.0 in.)
- Height: 516.4 mm (20.3 in.)
- Width: 512.8 mm (20.2 in.)
- Weight: 30.5 kg (67.2 lbs.)
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 9111-285: (#3638)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#3639) IBM ThinkVision L170p Flat Panel Monitor
The IBM ThinkVision L170p LCD flat-panel monitor has the following
general characteristics:
- Business black color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.264mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical 170 degrees; horizontal 170 degrees
- Contrast ratio: 500:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 9111-285: (#3639)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#3640) ThinkVision L171p Flat Panel Monitor
(No Longer Available as of June 16, 2006)
The ThinkVision L171p LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.280mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 400.0 mm (15.7 in.)
- Weight: 5.7 kg (12.6 lbs.)
- Viewing angle: Vertical 170 degrees; horizontal 170 degrees
- Contrast ratio: 800:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- RoHS compliant
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 9111-285: (#3640)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3641) - IBM T115 Flat Panel Monitor
(No Longer Available as of September 10, 2007)
The IBM T115 LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 15.0-inch LCD digital screen with a viewable image size of 381 mm
(15.0 inches) measured diagonally, incorporating a 0.297mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1024 x 768 (XGA)
- Tilt adjustable stand
- Analog connection
- Internal power
- Depth (w/stand): 144 mm (6.67 inches)
- Height (max w/stand): 361 mm (14.2 inches
- Width: 362 mm (14.2 inches)
- Weight: 2.9 kg (6.4 lbs)
- Contrast ratio: 400:1 (typical)
- Brightness: 250cd/m2 (typical)
- Viewing angles (H/V): 130 degrees/100 degrees
- For 9111-285: (#3641)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3642) ThinkVision L191p Flat Panel Monitor
(No Longer Available as of June 16, 2006)
The ThinkVision L191p LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 19.0-inch LCD digital screen with a viewable image size of 483 mm
(19.0 inches) measured diagonally, incorporating a 0.294mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024.
- Tilt/swivel and height adjustable stand
- Analog or digital connection
- Dual input allows attachment to two systems concurrently.
- Internal power
- Depth: 237.0 mm (9.3 in.)
- Height: 457.0 mm (18.0 in.)
- Width: 408.0 mm (16.1 in.)
- Weight: 7.1 kg (15.7 lbs.)
- Contrast ratio: 1000:1 (typical)
- Video inputs: 15-pin D / DVI-D
- Two removable cables: one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 9111-285: (#3642)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3643) - IBM T120 Flat Panel Monitor
(No Longer Available as of January 2, 2009)
The IBM T120 LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 20.1-inch LCD digital screen with a viewable image size of 511 mm
(20.1 inches) measured diagonally, incorporating a 0.255 mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1600 x 1200 (UXGA)
- Tilt/lift adjustable stand
- Analog and digital connections
- Internal power
- Depth (w/stand): 246 mm (9.7 inches)
- Height (max w/stand): 416.6 mm (16.5 inches)
- Width: 445.6 mm (17.5 inches)
- Weight: 7.5 kg (16.5 lbs)
- Contrast ratio: 700:1 (typical)
- Brightness:300cd/m2 (typical)
- Viewing angles(H/V): 178 degrees/178 degrees
- Video inputs: 15-pin D / DVI-D
- Two removable cables, one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 9111-285: (#3643)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3644) - IBM T119 Flat Panel Monitor
(No Longer Available as of July 31, 2009)
The IBM T119 LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 19.0-inch LCD digital screen with a viewable image size of 483 mm
(19.0 inches) measured diagonally, incorporating a 0.294 mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024 (SXGA)
- Tilt/lift adjustable stand
- Analog and digital connections
- Internal power
- Depth (w/stand): 246 mm (9.7 inches)
- Height (max w/stand): 443.6 mm (17.5 inches)
- Width: 418 mm (16.5 inches)
- Weight: 7.4 kg (16.3 lbs)
- Contrast ratio: 550:1 (typical)
- Brightness:250cd/m2 (typical)
- Viewing angles (H/V): 140 degrees/135 degrees
- Video inputs: 15-pin D / DVI-D
- Two removable cables, one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 9111-285: (#3644)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3645) - IBM T117 Flat Panel Monitor
(No Longer Available as of July 31, 2009)
The IBM T117 LCD flat-panel monitor has the following general
characteristics:
- Business black color
- 17.0-inch LCD digital screen with a viewable image size of 432 mm
(17.0 inches) measured diagonally, incorporating a 0.264 mm pixel
pitch/type for bright, high-definition images.
- Maximum resolution of 1280 x 1024 (SXGA)
- Tilt/lift adjustable stand
- Analog and digital connections
- Internal power
- Depth (w/stand): 246 mm (9.7 inches)
- Height (max w/stand): 395.5 mm (15.6 inches)
- Width: 375.4 mm (14.8 inches)
- Weight: 5.8 kg (12.8 lbs)
- Contrast ratio: 500:1 (typical)
- Brightness: 300cd/m2 (typical)
- Viewing angles (H/V): 140 degrees/130 degrees
- Video inputs: 15-pin D / DVI-D
- Two removable cables, one analog and one digital
- Attributes provided: Color Flat-panel Monitor
- Attributes required: Graphics Adapter
- For 9111-285: (#3645)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3752) Service Package
(No Longer Available as of January 7, 2011)
This kit contains publications, wrap plugs, and diagnostic CD-ROM.
The "Diagnostics Information for Multiple Bus Systems" contains
information common to all multiple bus system units and is used primarily
for problem isolation by a customer's service specialist trained on the
unit being serviced.
These publications are intended to be used in the customer's
enterprise by the customer's own service specialists, and not by IBM
Service personnel.
Two wrap plugs are included for use in diagnostic testing of the
following connections to the system unit:
- RS-232 serial I/O port
- parallel I/O port
This kit also contains system diagnostic CD-ROM, along with a test
diskette, for use by the customer's service specialist (not by IBM
Service personnel).
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#3752)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3925) Serial Port Converter Cable, 9-Pin to 25-Pin
This cable converts the 9-pin serial port on the system to a 25-pin
serial port which allows the user to attach 25-pin serial devices to the
system.
- Attributes provided: 9-Pin to 25-Pin connectivity
- Attributes required: None
- For 9111-285: (#3925)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3926) Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
(No Longer Available as of July 29, 2011)
This 4-meter cable and transposer (2 parts) allows external async
devices such as printers or terminals to be attached directly to the
9-pin serial port. This is equivalent to using #3925 in combination with
#2934.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#3926)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 3)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#3927) Serial Port Null Modem Cable, 9-pin to 9-pin, 3.7M
This 3.7 meter 9 pin to 9 pin Null modem Serial cable allows two
EIA-232 communications ports to exchange data with one another without
going through a modem.
- Attributes provided: 9 pin female connector at each end of the cable
- For 9111-285: (#3927)
- Minimum required: 0
- Maximum allowed: 99 (Initial order maximum: 99)
- OS level required: n/a
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: Does not apply
(#3928) Serial Port Null Modem Cable, 9-pin to 9-pin, 10M
This 10 meter 9 pin to 9 pin Null Modem Serial cable allows two
EIA-232 communications ports to exchange data with one another without
going through a modem.
- Attributes provided: 9 pin female connector at each end of the cable
- For 9111-285: (#3928)
- Minimum required: 0
- Maximum allowed: 99 (Initial order maximum: 99)
- OS level required: n/a
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: Does not apply
(#4242) 6-Foot Extender Cable for Displays (15-pin D-shell to 15-pin D-shell)
This cable is required to connect displays with a 15-pin "D" shell
connector to the appropriate accelerator connector when it is farther
away than the attached monitor cable can reach. Rack mounted systems are
likely candidates for this extender cable.
- Attributes provided: 6-foot extension cable
- Attributes required: Supported monitor and adapter with a 15-pin "D"
shell connector.
- For 9111-285: (#4242)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4256) Extender Cable - USB Keyboards, 2M
This feature provides a 2M extension cable for use with USB keyboards.
- Attributes provided: 2M Extension Cable
- Attributes required: USB Keyboard
- For 9111-285: (#4256)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4267) SCSI Cable, PCI Adapter to Hot-Swap Disks
SCSI cable that connects a PCI adapter to the hot swap disks.
- Attributes provided: Connection between adapter and hot swap disk
drives.
- Attributes required: None
- For 9111-285: (#4267)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4275) External SCSI Port Enablement Cable
(No Longer Available as of January 4, 2010)
SCSI cable that connects one SCSI internal controller to an external
port allowing attachment of external SCSI devices to the system.
Installing this feature in the system will negate the usage of a second
four-pack disk enclosure.
- Attributes provided: External SCSI port
- Attributes required: One internal SCSI controller
- For 9111-285: (#4275)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#4278) SCSI Cables (Power and Logic), PCI Riser to SCSI LVD Media Device; Mounting Tray
(No Longer Available as of January 4, 2010)
This feature number provides a SCSI LVD logic and power cable that
connects the SCSI controller on the system planar to the SCSI media bay.
Required when installing a SCSI LVD device in the SCSI media bay. Also
includes a mounting tray for the SCSI LVD media device.
- Attributes provided: Connection between SCSI controller and the SCSI
media bay Mounting tray.
- Attributes required: SCSI LVD device in SCSI media bay.
- For 9111-285: (#4278)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: No
- Return parts MES: No
(#4959) IBM Token-Ring PCI Adapter
The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short,
32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either half-
duplex or full-duplex.
Automatic Ring-Speed selection prevents "wrong speed" insertion into
the ring, even when connected to speed-sensing hubs. This adapter will
operate with either unshielded twisted pair (UTP) Cat 5 cable with RJ-45
connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin
D-shell connectors. The Token-Ring PCI Adapter will provide network boot
capability.
- Attributes provided:
- Attributes required: A single empty 32-bit PCI adapter slot.
- For 9111-285: (#4959)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#4962) 10/100 Mbps Ethernet PCI Adapter II
The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single
port PCI ethernet adapter. This high performance, low power ethernet
10/100Mbps LAN adapter can be used in both client and server PCI systems.
The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and
100Base-TX full duplex ethernet LAN connectivity. The adapter supports
Category-5 unshielded twisted pair cabling for both 10/100 Mbps and
Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps
Ethernet PCI Adapter II supports:
- Half / Full Duplex 10/100 Mbps Ethernet interface
- 10/100 Mbps data rates
- Auto-negotiation for 10/100 speed and half/full duplex
- Network boot capability and Network Install Manager (NIM)
- IEEE 802.3 Ethernet Specification
- IEEE 802.3u Fast Ethernet Specification
After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the
off-load of IP Security cryptographic algorithms by providing hardware
assistance in performing data encryption and authentication. This
support is provided with AIX 5.1 (with appropriate software updates)and
later software. This IP Security function, normally performed with
encryption software by the host, is off-loaded to this adapter to enhance
network traffic throughput and reduce CPU utilization. If you are
running with AIX 5.1, to invoke the IP Security function on the adapter,
you must obtain AIX 5.1 software updates IY27069 and IY26514 or the
5100-02 Recommended Maintenance package. These updates can be obtained
by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD
(LCD4-1103-03) dated 4/2002 or later.
Note: This IP Security function is not supported with AIX 4.3 software.
An additional function called 'Large Send' or sometimes known as TCP
Segmentation is also available. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also available. Both these functions are
available with AIX version 5.1 with APAR IY38248 or later software, or
AIX version 5.2 with APAR IY38492 or later software.
- Attributes provided: One 10/100 Mbps Ethernet port (connector)
- Attributes required: One PCI slot
- For 9111-285: (#4962)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5001) Custom Service Specify
(No Longer Available as of November 27, 2009)
This feature code specifies that the system will receive special
request services from the Customer Solution Center (CSC).
- Attributes provided: Customization
- Attributes required: None
- For 9111-285: (#5001)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5005) Software Preinstall
(No Longer Available in Latin America as of March 01, 2006)
Licensed programs may be preinstalled on the media selected. To order
this option, specify code (#5005) on the initial system order. The
preinstalled licensed programs will be at the same release level as
programs being shipped from the Program Libraries at the time the system
is manufactured.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#5005)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5170) Power Supply, 700 Watt AC
(No Longer Available as of January 4, 2010)
This feature provides a 700 Watt AC power supply.
- Attributes provided:700 Watt AC power supply
- Attributes required: None
- For 9111-285: (#5170)
- Minimum required: 1
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5326) - 1-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache
(No Longer Available as of January 2, 2009)
1-core processor card with 2.1 GHz POWER5+ processor and 36MB of L3
cache. Attached to planar.
- Attributes provided: 1-core processor card, 36MB L3 cache.
- Attributes required: None
- For 9111-285: (#5326)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5327) - 2-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache
(No Longer Available as of January 2, 2009)
2-core processor card with 2.1 GHz POWER5+ processor and 36MB of L3
cache. Attached to planar.
- Attributes provided: 2-core processor card, 36MB L3 cache.
- Attributes required: None
- For 9111-285: (#5327)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#5700) IBM Gigabit Ethernet-SX PCI-X Adapter
The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000
Base-SX) full-duplex Ethernet LAN connection with throughput on a
standard shortwave multimode optical cable which conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
Note: For optimum performance, the adapter should be placed in a 64 bit
PCI-X card slot.
Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an
LC type connector on the card. This new, smaller form factor connector
is being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half Duplex (HDX) mode is not supported.
- Attributes provided: One full-duplex 1000Base-SX fiber connection to
a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 9111-285: (#5700)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex
Gigabit Ethernet adapter designed with highly integrated components.
This adapter can be configured to run at 10, 100, or 1000 Mbps data
rates. The adapter interfaces to the system via the PCI-X bus and
connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair
(UTP) cable for distances of up to 100m. AIX Network Install Manager
(NIM) boot capability is supported with this adapter. The adapter
conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also
supports jumbo frames when running at the 1000 Mbps speed.
Note: For optimum performance, adapter should be placed in a 64 bit PCI-X
card slot.
Limitations: The 1000 Mbps speed is not supported in Half Duplex
(HDX) mode.
- Attributes provided: One full-duplex 10/100/1000Base-TX UTP
connection to a Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 9111-285: (#5701)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5703) PCI-X Dual Channel Ultra320 SCSI RAID Adapter
The PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5703) is a 64-bit
3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing
RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI
physical disk drives on two independent SCSI buses.
To increase the data writing performance, a 40 MByte non-volatile
fast-write cache is provided as a resident part of this adapter. The 40
MByte fast-write cache can provide a significant improvement in data
throughput and response time during certain sequence write operations
compared to SCSI RAID adapters without the fast-write cache. The
response time and data transfer improvement will vary depending upon the
data block sizes, the percentage of sequential writes, machine
type/model, and application parameters.
The Dual Channel Ultra320 SCSI RAID Adapter has two independent
ultra320 SCSI buses. There are two internal ports and two external
ports. The two internal ports are shared with the two external ports.
The SCSI busses can drive either an internal port or an external port.
The internal ports can be used to provide an internal RAID solution on
certain supporting pSeries systems with internal multiple disk drives or
packs of drives. Internally attached Ultra320 devices are designed to
run at a data rate of up to 320 MB per second on systems that have
internal backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array (attached to either the
internal or external ports) are required to be formatted to 522 byte
sectors. 522 byte sectors provide additional CRC error checking for
improved data integrity. A menu option is provided in the AIX supporting
software which will reformat these disk drives prior to their usage in an
array. Conversely, when a disk drive is removed from an array, a similar
menu option is also provided to re-format them back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors. Also, there are
some disk drives which do not support being formatted to 522 Byte
Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these
known situations when they exist. For disk microcode updates, go to the
following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI RAID Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate configured as either a non-array or
an array of disks Also the two external ports provide non-array
connectivity to numerous other SCSI external subsystems. Check the
external subsystem sales/web pages for verification of connectivity
support with this adapter.
Limitations:
- The two external ports provide connectivity to an IBM 2104-DU3
Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower
at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM
2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage
Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only
non-array configuration support.
- The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.
- Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following Web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One PCI or PCI-X bus slot
- For 9111-285: (#5703)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full
Duplex, dual ported, Gigabit Ethernet adapter designed with highly
integrated components. This adapter can be configured to run each port
at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the
system via a PCI or PCI-X bus and connects to a network using a 4-pair
CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m.
AIX Network Install Manager (NIM) boot capability is supported with this
adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard.
The adapter also supports jumbo frames when running at the 1000 Mbps
speed.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706)
should be considered where maximum port density is required per I/O card
slot. For a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM 10/100/1000 Base-TX
Ethernet PCI-X Adapter (#5701) is the preferred solution.
Note: For optimum performance, the adapter should be placed in a 64 bit
PCI-X card slot whenever possible.
Limitations: The 1000 Mbps speed is not supported in Half Duplex
(HDX) mode.
- Attributes provided: Two full-duplex 10/100/1000Base-TX UTP
connections to Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 9111-285: (#5706)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps
(1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a
standard shortwave multimode optical cable that conforms to the IEEE
802.3z standard. The adapter supports distances of 260m for 62.5 micron
Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install
Manager (NIM) boot capability is supported with this adapter.
A function called 'Large Send' or sometimes known as TCP Segmentation
is also provided by this adapter. This function offloads the TCP
segmentation operation from the AIX IP layer to the adapter for outgoing
(transmit side) TCP segments. Another function known as "Checksum
Offload" which offloads the TCP/UDP Checksum Operation or workload from
the CPU to the adapter is also provided.
The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be
considered where maximum port density is required per I/O card slot. For
a suggested maximum number of adapters taking performance into
consideration, refer to the RS/6000 & pSeries PCI Adapter Placement
Reference SA38-0538. If card slots are not the limiting factor and
maximum throughput is required, the single port IBM Gigabit Ethernet-SX
PCI-X Adapter (#5700) is the preferred solution.
Note: For optimum performance, the adapter should be placed in a 64 bit
PCI-X card slot whenever possible.
Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC
type connector on the card. This new, smaller form factor connector is
being used by the industry for the next generation of fiber optic
networks. If connecting into an older, existing SC type connector
network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50
Micron Fiber Converter Cable (#2456) is required.
Limitation: Half Duplex (HDX) mode is not supported.
- Attributes provided: Two full-duplex 1000Base-SX fiber connections
to a Gigabit Ethernet LAN(s).
- Attributes required: One available PCI or PCI-X card slot
- For 9111-285: (#5707)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5709) Dual Channel SCSI RAID Enablement Card
The Dual Channel SCSI RAID Enablement Card (#5709) is a bootable high
performance SCSI RAID Enablement feature providing RAID 0,5, or 10
capability to select pSeries systems with the appropriate supporting
integrated SCSI adapter and internal multiple disk drives or packs of
drives.
To increase the data writing performance, a 16 MByte non-volatile
fast-write cache is provided as a resident part of this feature. The 16
MByte fast-write cache can provide an improvement in data throughput and
response time during certain sequence write operations compared to SCSI
RAID adapters without the fast-write cache. The response time and data
transfer improvement will vary depending upon the data block sizes, the
percentage of sequential writes, machine type/model, and application
parameters.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array are required to be
formatted to 522 byte sectors. 522 byte sectors provide additional CRC
error checking for improved data integrity. A menu option is provided in
the AIX supporting software which will reformat these disk drives prior
to their usage in an array. Conversely, when a disk drive is removed
from an array, a similar menu option is also provided to re-format them
back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors. Also, there are
some disk drives which do not support being formatted to 522 Byte
Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these
known situations when they exist. For disk microcode updates, go to the
following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Limitations:
- Even though the supporting integrated adapter with the Dual Channel
SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up
to 320 MBytes/s), the internally attached disk drives will run at a
maximum SCSI bus data rate specified by that supporting system disk
backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following Web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Internal disk drives to be configured as an
array.
- Attributes required: Systems with supporting integrated SCSI
adapter.
- For 9111-285: (#5709)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5712) PCI-X Dual Channel Ultra320 SCSI Adapter
The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a 64-bit 3.3
volt adapter and is an excellent solution for high-performance SCSI
applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two
SCSI channels (busses), each capable of running 320 MBps (max.), up to
twice the maximum data transfer rate of the previous Dual Channel Ultra3
SCSI adapter (160 MBps). Each SCSI bus can either be internal (on
systems that support internal SCSI device or backplane attachments) or
external. Internally attached Ultra320 devices are designed to run at a
data rate of up to 320 MB per second on systems that have internal
backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
Two industry standard VHDCI 68-pin connectors are mounted on the
adapter's end bracket allowing attachment of various LVD and SE external
subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to
68-pin, (#2118) can be used with older external SE devices or subsystems
to allow connection to the VHDCI connector on the PCI-X Dual Channel
Ultra320 SCSI Adapter.
The two external ports provide connectivity to an IBM 2104-DS4
Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower
at up to 320 MB/s SCSI bus data rate. The two external ports also
provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or
2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data
rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1
Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also
the two external ports provide connectivity to numerous other SCSI
external subsystems. Check the external subsystem sales/web pages for
verification of connectivity support with this adapter.
The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a native boot
adapter with AIX 5.1 or AIX 5.2 software in a supported pSeries or
RS/6000 systems. The adapter also supports target mode.
Limitations:
- The two external ports do not support the connection to the IBM
7131-105 IBM Multi-Storage Tower Model 105.
- Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following Web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices
- Attributes required: One available 3.3 volt PCI or PCI-X slot
- For 9111-285: (#5712)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5713) 1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter
The 1 Gigabit iSCSI TOE PCI-X adapter encapsulates SCSI Commands and
data into TCP and transports them over the Ethernet via IP packets. The
adapter operates as an iSCSI TOE (TCP/IP Offload Engine). This offload
function eliminates host protocol processing and reduces CPU interrupts.
Adapter uses RJ45 Gigabit Ethernet connector.
- Attributes provided: Offload of host protocol processing
- Attributes required: Available PCI-X Slot
- For 9111-285: (#5713)
Note: Max 15 per system.
(#5714) 1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter
The 1 Gigabit iSCSI TOE PCI-X adapter encapsulates SCSI Commands and
data into TCP and transports them over the Ethernet via IP packets. The
adapter operates as an iSCSI TOE (TCP/IP Offload Engine). This offload
function eliminates host protocol processing and reduces CPU interrupts.
Adapter uses Small form factor LC type fiber optic connector.
- Attributes provided: Offload of host protocol processing
- Attributes required: Available PCI-X Slot
- For 9111-285: (#5714)
Note: Max 15 per system
(#5716) 2 Gigabit Fibre Channel PCI-X Adapter
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data,
short form factor PCI-X adapter with an LC type external fiber connector
that provides single or dual initiator capability over an optical fiber
link or loop. With the use of appropriate optical fiber cabling, this
adapter provides the capability for a network of high speed local and
remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will
auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of
which the device or switch is capable. Distances of up to 500 meters
running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data
rate are supported between the adapter and an attaching device or switch.
When used with IBM supported Fibre Channel storage switches supporting
long-wave optics, distances of up to 10 kilometers are capable running at
either 1 Gps or 2 Gps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach
devices either directly, or by means of Fibre Channel Switches. If
attaching a device or switch with a SC type fiber connector(s), use of an
LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 Fibre Channel/FC-AL interface
- Attributes required: 1 empty PCI or PCI-X slot
- For 9111-285: (#5716)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5718) 10 Gigabit Ethernet -SR PCI-X Adapter
Provides 10 Gigabit Ethernet PCI-X based server connections. Supports
distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um
multimode fiber with 2000MHz km minimum model bandwidth at 850 nm.
Adapter connector type is LC.
- Attributes provided: Provides highend bandwidth for networking
- Attributes required: Supported on PCI-X slots only
- For 9111-285: (#5718)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5719) IBM 10 Gigabit Ethernet-LR PCI-X Adapter
Offers 10 Gigabit Ethernet PCI-X based server connections over a
maximum of 10 kilometers of 1310nm single-mode fiber optic cable. The
adapter conforms to the IEEE 802.3ae standard. The adapter requires 9um
single-mode fiber optic cables and uses a SC connector type for
connecting into net-work infrastructure components like 10 Gigabit
Ethernet switch/router with SC connectors.
- Attributes provided: 10 Gigabit Ethernet connections
- Attributes required: Available PCI-X slot
- For 9111-285: (#5719)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5721) - 10 Gb Ethernet-SR PCI-X 2.0 DDR Adapter
(No Longer Available as of November 27, 2009)
The adapter supports distances of up to 33m using 62.5 um multimode
fiber or 300m using 50 um multimode fiber with 2000 MHz*km minimum model
bandwidth at 850 nm wavelength. The fiber cable connects to the adapter
with LC type connector. The adapter conforms to the IEEE 802.3ae
standard.
- Attributes provided: Provides high-end bandwidth for networking
- Attributes required: PCI-X slot or for improved bandwidth plug into
PCI-X 2.0 DDR slot.
- For 9111-285: (#5721)
Note: The minimum system firmware level required to operate in Double
Data Rate (DDR) mode is SF240_205.
System firmware can be downloaded from:
http://techsupport.services.ibm.com/server/mdownload2/download.html
Note: The combined cumulative total for feature 5721 and 5722 is 1.
(#5722) - 10 Gb Ethernet-LR PCI-X 2.0 DDR Adapter
(No Longer Available as of November 28, 2008)
The adapter supports a maximum of 10 kilometers of 1310nm 9um single-
mode fiber optic cable. The adapter conforms to the IEEE 802.3ae
standard. The adapter requires 9um single-mode fiber optic cables and
uses a SC connector to facilitate connecting into network infrastructure
components like 10 Gigabit Ethernet switch/router with SC connectors.
- Attributes provided: 10 Gigabit Ethernet connections
- Attributes required: PCI-X slot or for improved bandwidth plug in
PCI-X 2.0 DDR slot.
- For 9111-285: (#5722)
Note: The minimum system firmware level required to operate in Double
Data Rate (DDR) mode is SF240_205.
System firmware can be downloaded from:
http://techsupport.services.ibm.com/server/mdownload2/download.html
Note: The combined cumulative total for feature 5721 and 5722 is 1.
(#5723) 2-Port Asynchronous EIA-232 PCI Adapter
(No Longer Available as of November 27, 2009)
Connection for 2 Asynchronous EIA-232 devices. Ports are Programmable
to support EIA-232 protocols, at a line speed of 128K bps.
- Attributes provided: 2 Asynchronous Ports
- Attributes required: One PCI Slot
- For 9111-285: (#5723)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5727) Dual Channel SCSI RAID Enablement Card
The Dual Channel SCSI RAID Enablement Card (#5727) is a bootable high
performance SCSI RAID Enablement feature providing RAID 0,5, or 10
capability to select pSeries systems with the appropriate supporting
integrated SCSI adapter and internal multiple disk drives or packs of
drives.
To increase the data writing performance, a 16 MByte non-volatile
fast-write cache is provided as a resident part of this feature. The 16
MByte fast-write cache can provide an improvement in data throughput and
response time during certain sequence write operations compared to SCSI
RAID adapters without the fast-write cache. The response time and data
transfer improvement will vary depending upon the data block sizes, the
percentage of sequential writes, machine type/model, and application
parameters.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array are required to be
formatted to 522 byte sectors. 522 byte sectors provide additional CRC
error checking for improved data integrity. A menu option is provided in
the AIX supporting software which will reformat these disk drives prior
to their usage in an array. Conversely, when a disk drive is removed
from an array, a similar menu option is also provided to re-format them
back to 512 byte sectors.
Note: Some disk drives require that their microcode be updated to the
latest level before being formatted to 522 Byte Sectors. Also, there are
some disk drives which do not support being formatted to 522 Byte
Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these
known situations when they exist. For disk microcode updates, go to the
following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Limitations:
- Even though the supporting integrated adapter with the Dual Channel
SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up
to 320 MBytes/s), the internally attached disk drives will run at a
maximum SCSI bus data rate specified by that supporting system disk
backplane.
- Disk drives internal to the pSeries system shipped prior to September
1, 2003 require a disk drive microcode update to run at Ultra320 speed.
To obtain the appropriate microcode update, go to the following Web page
URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Internal disk drives to be configured as an
array.
- Attributes required: Systems with supporting integrated SCSI
adapter.
- For 9111-285: (#5727)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5736) PCI-X DDR 2.0 Dual Channel Ultra320 SCSI Adapter
The PCI-X Dual Channel Ultra320 SCSI Adapter (#5736) is a 64-bit 3.3
volt adapter and is an excellent solution for high-performance SCSI
applications. The PCI-X DDR Dual Channel Ultra320 SCSI Adapter provides
two SCSI channels (busses), each capable of running 320 MBps (max.).
Each SCSI bus can either be internal (on systems that support internal
SCSI device or backplane attachments) or external. Internally attached
Ultra320 devices are designed to run at a data rate of up to 320 MB per
second on systems that have internal backplanes that are capable of
supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and also maintain a reasonable drive distance, the adapter
utilizes Low Voltage Differential (LVD) drivers and receivers. To fully
utilize this 320 MB per second performance, all attaching devices should
also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320
devices coexist on the same bus, each device will operate at its rated
speed. For lower speed single-ended (SE) devices, the SCSI bus will
switch to single-ended (SE) performance and interface to all devices on
that SCSI bus at the lower SE bus data rate of the device.
Two VHDCI 68-pin connectors are mounted on the adapter's end bracket
allowing attachment of various LVD and SE external subsystems. A .3
meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be
used with older external SE devices or subsystems to allow connection to
the VHDCI connector on the PCI-X DDR Dual Channel Ultra320 SCSI Adapter.
The two external ports provide connectivity to numerous other SCSI
external subsystems. Check the external subsystem sales/web pages for
verification of connectivity support with this adapter.
The PCI-X DDR Dual Channel Ultra320 SCSI Adapter (#5736) is a native
boot adapter with AIX 5.3L or AIX 5.3D software in a supported pSeries or
RS/6000 systems. The adapter also supports target mode.
Limitations:
- Even though the Dual Channel Ultra320 SCSI nonRAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.
- To obtain microcode update go to the following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
- Attributes provided: Attachment of internal SCSI devices (on systems
that support an internal SCSI device or backplane attachment with this
adapter) and external SCSI devices
- Attributes required: One available 3.3 volt PCI or PCI-X slot or
PCI-X 2.0 DDR slot.
- For 9111-285: (#5736)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5737) PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter
The PCI-X DDR Dual Channel Ultra320 SCSI RAID LVD only Adapter (#5737)
is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID
Adapter providing RAID 0, 5, 6, or 10 capability, and can address up to
thirty 16-bit SCSI physical disk drives on two independent SCSI buses.
To increase the data writing performance, a 90 MByte non-volatile
fast-write cache is a resident part of this adapter. The 90 MByte fast-
write cache can provide a significant improvement in data throughput and
response time during certain sequence write operations compared to SCSI
RAID adapters without the fast-write cache. The response time and data
transfer improvement will vary depending upon the data block sizes, the
percentage of sequential writes, machine type/model, and application
parameters.
The Dual Channel Ultra320 SCSI RAID Adapter has two independent
ultra320 SCSI buses. There are two internal ports and two external
ports. The two internal ports are shared with the two external ports.
The SCSI busses can drive either an internal port or an external port.
The internal ports can be used to provide an internal RAID solution on
certain supporting pSeries systems with internal multiple disk drives or
packs of drives. Internally attached Ultra320 devices designed to run at
320 MB can run up to 320 MB per second on systems that have internal
backplanes that are capable of supporting Ultra320 speeds.
In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per
second and maintain a reasonable drive distance, the adapter utilizes Low
Voltage Differential (LVD) drivers and receivers. All attaching devices
should be Ultra320 LVD devices to utilize the 320 MB per second
performance, however, if Ultra2, Ultra3, or Ultra320 devices coexist on
the same bus, each device will operate at its rated speed. This card
does not support single-ended (SE) devices.
When an array configuration is selected with the RAID Manager, the
disk drives being designated as part of the array (attached to either the
internal or the external ports) are required to be formatted to 522-byte
sectors. 522-byte sectors provide additional CRC error checking for
improved data integrity. A menu option provide in the AIX supporting
software, which will reformat these disk drives prior to their usage in
an array. Conversely, when a disk drive is removed from an array, a
similar menu option is also provided to re-format them back to 512-byte
sectors. Note: Some disk drives require that their microcode be updated
to the latest level before being formatted to 522 Byte Sectors. In
addition, there are some disk drives, which do not support 522 Byte
Sectors format. The PCI-X SCSI Disk Array Manager will inform the user
of these known situations when they exist. For disk microcode updates,
go to the following Web page URL:
- http://techsupport.services.ibm.com/server/mdownload/
Two VHDCI 68-pin connectors are mounted on the adapter's end bracket
allowing attachment of various LVD external subsystems.
Limitations:
- Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports
that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally
attached disk drives will run at a maximum SCSI bus data rate specified
by that supporting system disk backplane.
Minimum System Firmware Required:
System firmware level required is SF235_185 or greater. Firmware
level SF235_185 adjusts the PCI slots to run in Single Data Rate (SDR)
mode. Enablement of Double Data Rate (DDR)slots to run at DDR mode is
planned to be provided in an upcoming firmware enhancement.
For Double Data Rate (DDR), check for firmware upgrade at URL:
- http://techsupport.services.ibm.com/server/mdownload2/download.html
Running the adapter on a system with firmware level lower than
SF235_185 is not supported.
- Attributes provided: Attachment of internal and external SCSI
devices
- Attributes required: One PCI or PCI-X DDR bus slot
- For 9111-285: (#5737)
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5740) 4-Port 10/100/1000 Base-TX PCI-X Adapter
The 4-Port 10/100/1000 Base -TX PCI-X adapter is a full height PCI-X
1.0a Ethernet adapter which supports four Gigabit ports on a single
adapter, delivers increased bandwidth for slot-constrained servers, and
is designed to provide high connectivity and reliability using two
integrated, dual-port Gigabit Ethernet controllers.
- Four RJ-45 ports
- 3.3 volts, 64-bit 133 MHz with 64-bit Bus Mastering on the PCI-X bus
- IEEE 802.3ab 1000Base-T compliant
- IEEE 802.3u 100Base-T compliant
- IEEE 802.3 10Base-T compliant
- 802.1q VLAN tagging
- Interrupt Moderation
- TCP Segmentation offload and encapsulation in hardware
- Checksum offloading of IP, TCP, and UDP frame
- Increased connectivity while significantly reducing CPU utilization
- Two LED adapter status indicators per port for link activity and
speed
- NIM is supported on all 4 ports
- RoHS compliant
Limit Full bandwidth performance may not be achieved with more than
one adapter per PCI Host Bridge (PHB) or more than one CPU.
- Attributes provided: Four 10/100/1000 RJ-45 ports
- Attributes required: One available PCI-X card slot
- For 9111-285: (#5740)
(#5751) IBM 4.7 GB IDE Slimline DVD-RAM Drive
The IBM 4.7 GB IDE Slimline DVD-RAM Drive is an internal tray loading,
multifunction storage device capable of reading and writing 4.7GB DVD-RAM
discs as well as reading a multitude of other optical media discs. This
drive also reads Type II (removable from cartridge) DVD-RAM discs. It is
a 12.7mm high Slimline form factor, multi-session capable, DVD-RAM drive
which provides state of the art performance. System boot and install
functions are supported with CD-ROM and DVD-RAM media.
Characteristics:
- Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer
diameter; 10.8MB/sec read (8X DVD-ROM); 2.7MB/sec write (2X DVD-RAM) and
2.7MB/sec read (2X DVD-RAM)
- Interface: Parallel IDE
- Average Random Access Time: 150ms CD-ROM; 180ms DVD-ROM; 229ms
DVD-RAM
- Buffer Memory: 2MB
- High-speed burst rate of 16/16/33 MB/second for PIO / MDMA / UDMA
transfers respectively
- Loading tray accommodates both 8cm discs and 12cm discs.
- Operates in either vertical or horizontal position
- Reads multi-session discs
- Reads CD-ROM, CD-R, CD-RW, DVD-ROM, & DVD-RAM discs.
- Reads 2.6GB DVD-RAM media; reads and writes 4.7GB and 9.4GB double
sided) DVD-RAM media
- Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA
and audio
Limitations:
- DVD video is not supported.
- Drive only reads CD-type formatted media with AIX 5.1.
- Attributes provided: One 4.7GB IDE Slimline DVD-RAM Drive
- Attributes required: One IDE 12.7mm high media bay
- For 9111-285: (#5751)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#5755) - 200/400GB Half High Ultrium 2 Tape Drive
The IBM 200/400GB Half High Ultrium 2 Tape Drive is a 5.25-inch, half-
high, Low Voltage Differential(LVD) 16-bit tape drive, which provides a
high capacity for save/restore and achieve functions. This tape drive
uses IBM Ultrium 1 and Ultrium 2 data cartridges and is compression
capable, providing a typical capacity of up to 400GB.
Characteristics:
- Capacity: 200 GB native and typical 400 GB capacity with 2:1
compression.
- Form Factor: 5.25-inch half high
- Media: Half High Ultrium 2 Tape Drive supports Ultrium 1 and Ultrium
2 data cartridges.
- Operation: Streaming
- Data Transfer Rate: 24MBps native mode, 48MBps (typical) with 2:1
compression.
- The IBM 200/400GB Half High Ultrium 2 Tape Drives can read and write
original LTO Ultrium Data Cartridges at original Ultrium 1 capacities at
up to 16 MB/sec native(32 MB/sec with 2:1 compression).
- Interface: SCSI Ultra-160,LVD Ultra-80, and Single-ended SCSI.
- Compatibility: Ultrium 1 (Read/Write), Ultrium 2 (Read/Write).
- Attributes provided: Ultrium 1 and Ultrium 2 tape capability
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal LVD 16-bit address
- For 9111-285: (#5755)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: No
- Return parts MES: No
Note: We recommend that you do not install server in an office
environment. Run tape backup during off-hours.
(#5758) - 4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter
The 4 Gigabit Single-Port Fibre Channel PCI-X 2.0 DDR Adapter is a
64-bit address/data, short form factor PCI-X adapter with an LC type
external fiber connector that provides single initiator capability over
an optical fiber link or loop. With the use of appropriate optical fiber
cabling, this adapter provides the capability for a network of high-speed
local and remote located storage. The 4 Gigabit Single-Port Fibre
Channel PCI-X Adapter will auto-negotiate for the highest data rate
between adapter and an attaching device at 1 Gbps, 2 Gbps or 4 Gbps of
which the device or switch is capable. Distances of up to 500 meters
running at 1 Gbps data rate, up to 300 meters running at 2 Gbps data
rate, and 4 Gbps data rate up to 150 meters are supported between the
adapter and an attaching device or switch. When used with IBM Fibre
Channel storage switches supporting long-wave optics, distances of up to
10 kilometers are capable running at either 1 Gbps, 2 Gbps, or 4 Gbps
data rates.
The 4 Gigabit Single-Port Fibre Channel PCI-X Adapter can be used to
attach devices either directly, or by means of Fibre Channel Switches.
If attaching a device or switch with a SC type fiber connector(s), use of
an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
There are two maximum quantities for High Bandwidth adapters, one for
performance, and one for connectivity. Adapter performance may be
limited by bandwidth constraints in a network. To maximize High
Bandwidth adapter performance in the server the performance maximum
quantity should not be exceeded. In applications where the end-to-end
network cannot sustain high performance and or connectivity is more
important than overall bandwidth performance the performance maximum
quantity can be exceeded up to the connectivity maximum quantity.
- Connectivity Maximum: (3)
- Performance Maximum: (3)
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.ibm.com/servers/storage/product/products_pseries.html
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 Fibre Channel
- Attributes required: 1 empty PCI or PCI-X 1.0 / 2.0 slot
- For 9111-285: (#5758)
Note: The minimum system firmware level required to operate in Single
Data Rate (SDR) mode is SF235_185. The minimum system firmware level
required to operate in Double Data Rate (DDR) mode is SF240_205.
System firmware can be downloaded from:
http://techsupport.services.ibm.com/server/mdownload2/download.html
(#5759) - 4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter
The 4 Gigabit Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter is a
64-bit address/data, short form factor PCI-X adapter with an LC type
external fiber connector that provides single or dual initiator
capability over an optical fiber link or loop. With the use of
appropriate optical fiber cabling, this adapter provides the capability
for a network of high-speed local and remote located storage. The
adapter will auto-negotiate for the highest data rate between adapter and
an attaching device at 1 Gbps, 2 Gbps, or 4 Gbps of which the device or
switch is capable. Distances of up to 500 meters running at 1 Gbps data
rate, up to 300 meters running at 2 Gbps data rate, and 4 Gbps data rate
up to 150 meters are supported between the adapter and an attaching
device or switch. When used with IBM Fibre Channel storage switches
supporting long-wave optics, distances up to 10 kilometers are capable
running at either 1 Gbps, 2 Gbps, or 4 Gbps data rates.
The adapter can be used to attach devices either directly, or by means
of Fibre Channel Switches. If attaching a device or switch with a SC
type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable
(#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.
There are two maximum quantities for High Bandwidth adapters, one for
performance, and one for connectivity. Adapter performance may be
limited by bandwidth constraints in a network. To maximize High
Bandwidth adapter performance in the server the performance maximum
quantity should not be exceeded. In applications where the end-to-end
network cannot sustain high performance and or connectivity is more
important than overall bandwidth performance the performance maximum
quantity can be exceeded up to the connectivity maximum quantity.
- Connectivity Maximum: (3)
- Performance Maximum: (2)
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.ibm.com/servers/storage/product/products_pseries.html
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
Note: Please carefully consider the usage of this card. If placed in
a PCI-X slot rated as SDR compatible and/or has the slot speed of 133
MHz, the AIX value of the max_xfer_size must be kept at the default
setting of 0x100000 (1 megabyte) when both ports are in use. The
architecture of the DMA buffer for these slots does not accommodate
larger max_xfer_size settings.
- Attributes provided: 2 Fibre Channel
- Attributes required: 1 empty PCI or PCI-X 2.0 slot
- For 9111-285: (#5759)
Note: The minimum system firmware level required to operate in Single
Data Rate (SDR) mode is SF235_185. The minimum system firmware level
required to operate in Double Data Rate (DDR) mode is SF240_205.
System firmware can be downloaded from:
http://techsupport.services.ibm.com/server/mdownload2/download.html
(#5951) Full Width Quiet Touch Keyboard -- USB, US English, #103P
This feature provides a USB attached US English #103P keyboard with a
3m cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5951)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5952) Full Width Quiet Touch Keyboard -- USB, French, #189
This feature provides a USB attached French #189 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5952)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5953) Full Width Quiet Touch Keyboard -- USB, Italian, #142
This feature provides a USB attached Italian #142 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5953)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5954) Full Width Quiet Touch Keyboard -- USB, German/Austrian, #129
This feature provides a USB attached German/Austrian #129 keyboard
with a 3m cable. The two built-in USB ports conveniently provide for
additional expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5954)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5955) Full Width Quiet Touch Keyboard -- USB, UK English, #166P
This feature provides a USB attached UK English #166 keyboard with a
3m cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5955)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5956) Full Width Quiet Touch Keyboard -- USB, Spanish, #172
This feature provides a USB attached Spanish #172 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5956)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5957) Full Width Quiet Touch Keyboard -- USB, Japanese, #194
This feature provides a USB attached Japanese #194P keyboard. The two
built-in USB ports conveniently provide for additional expansion. Color
is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5957)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5958) Full Width Quiet Touch Keyboard -- USB, Brazilian Portuguese, #275
This feature provides a USB attached Brazilian Portuguese #275
keyboard with a 3m cable. The two built-in USB ports conveniently
provide for additional expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5958)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5959) Full Width Quiet Touch Keyboard -- USB, Hungarian, #208
This feature provides a USB attached Hungarian #208 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5959)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5960) Full Width Quiet Touch Keyboard -- USB, Korean, #413
This feature provides a USB attached Korean #413 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5960)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5961) Full Width Quiet Touch Keyboard -- USB, Chinese, #467
This feature provides a USB attached Chinese #467 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5961)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5962) Full Width Quiet Touch Keyboard -- USB, French Canadian, #445
This feature provides a USB attached French Canadian #445 keyboard
with a 3m cable. The two built-in USB ports conveniently provide for
additional expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5962)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5963) Full Width Quiet Touch Keyboard -- USB, Canadian French, #058
(No longer available as of August 29, 2008)
This feature provides a USB attached Canadian French #058 keyboard
with a 3m cable. The two built-in USB ports conveniently provide for
additional expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5963)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5964) Full Width Quiet Touch Keyboard -- USB, Belgian/French, #120
This feature provides a USB attached Belgian/French #120 keyboard with
a 3m cable. The two built-in USB ports conveniently provide for
additional expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5964)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5965) Full Width Quiet Touch Keyboard -- USB, Swedish/Finnish, #153
This feature provides a USB attached Swedish/Finnish #153 keyboard
with a 3m cable. The two built-in USB ports conveniently provide for
additional expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5965)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5966) Full Width Quiet Touch Keyboard -- USB, Danish, #159
This feature provides a USB attached Danish #159 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5966)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5967) Full Width Quiet Touch Keyboard -- USB, Bulgarian, #442
This feature provides a USB attached Bulgarian #442 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5967)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5968) Full Width Quiet Touch Keyboard -- USB, Swiss/French/German, #150
This feature provides a USB attached Swiss, French/German #150 /F/G
keyboard with a 3m cable. The two built-in USB ports conveniently
provide for additional expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5968)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5969) Full Width Quiet Touch Keyboard -- USB, Norwegian,#155
This feature provides a USB attached Norwegian #155 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5969)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5970) Full Width Quiet Touch Keyboard -- USB, Dutch, #143
This feature provides a USB attached Dutch #143 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5970)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5971) Full Width Quiet Touch Keyboard -- USB, Portuguese, #163
This feature provides a USB attached Portuguese #163 keyboard with a
3m cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5971)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5972) Full Width Quiet Touch Keyboard -- USB, Greek, #319
This feature provides a USB attached Greek #319 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5972)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5973) Full Width Quiet Touch Keyboard -- USB, Hebrew, #212
This feature provides a USB attached Hebrew #212 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5973)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5974) Full Width Quiet Touch Keyboard -- USB, Polish, #214
This feature provides a USB attached Polish #214 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5974)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5975) Full Width Quiet Touch Keyboard -- USB, Slovakian, #245
This feature provides a USB attached Slovakian #245 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5975)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5976) Full Width Quiet Touch Keyboard -- USB, Czech, #243
This feature provides a USB attached Czech #243 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5976)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5977) Full Width Quiet Touch Keyboard -- USB, Turkish, #179
This feature provides a USB attached Turkish #179 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5977)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5978) Full Width Quiet Touch Keyboard -- USB, LA Spanish, #171
This feature provides a USB attached LA Spanish #171 keyboard with a
3m cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5978)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5979) Full Width Quiet Touch Keyboard -- USB, Arabic, #253
This feature provides a USB attached Arabic #253 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5979)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5980) Full Width Quiet Touch Keyboard -- USB, Thai, #191
This feature provides a USB attached Thai #191 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5980)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5981) Full Width Quiet Touch Keyboard -- USB, Russian, #443
This feature provides a USB attached Russian #443 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5981)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5982) Full Width Quiet Touch Keyboard -- USB, Slovenian, #234
This feature provides a USB attached Slovenian #234 keyboard with a 3m
cable. The two built-in USB ports conveniently provide for additional
expansion. Color is Business Black.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5982)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#5983) Full Width Quiet Touch Keyboard -- USB, US English International, #103P
This feature provides a USB attached US English International #103P
keyboard with a 3m cable. The two built-in USB ports conveniently
provide for additional expansion.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#5983)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology
The IBM 80/160 GB Internal Tape Drive with VXA* Technology is a
5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high
capacity for save/restore and achieve functions. This tape drive uses
VXAtape* data cartridges and is compression capable, providing a capacity
of up to 160 GB - a significant increase in capacity over the previous
internal tape drives.
Characteristics
- Capacity: 80 GB native mode, 160 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: uses VXAtape data cartridges
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression
- Interface: SCSI-2 (LVD/SE) asynchronous/synchronous
- Compatibility: 80 GB mode (Read/Write), 160 GB compression
(Read/Write)
- Attributes provided: One 80/160 GB internal tape drive
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal 16-bit address
- For 9111-285: (#6120)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: No
- Return parts MES: Does not apply
(#6204) PCI Universal Differential Ultra SCSI Adapter
The PCI Universal Differential Ultra SCSI Adapter is the latest
technology advancement of an RS/6000 SCSI-2 differential adapter with a
maximum data transfer rates of 40 MBytes per second. This adapter has
the capability to be plugged into the newer +3.3 volt PCI slots as well
as the older +5 volt PCI slots. Feature code # 6204 allows connection to
external differential SCSI-2 F/W or Ultra SCSI type devices up to 25
meters away. Feature code # 6204 will negotiate with each external
device and transfer data at the fastest SCSI data transfer rate capable
by the external device. Check system sales pages as to which external
differential subsystems are supported.
The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra)
documentation. Industry standard 68 pin connectors are incorporated
(SCSI "P" connector definition of X3T9.2/90-048).
- Attributes provided: 15 external SCSI-2 addresses
- Attributes required: 1 PCI slot.
- For 9111-285: (#6204)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#6239) 2 Gigabit Fibre Channel PCI-X Adapter
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data,
short form factor PCI-X adapter with an LC type external fiber connector
that provides single or dual initiator capability over an optical fiber
link or loop. With the use of appropriate optical fiber cabling, this
adapter provides the capability for a network of high speed local and
remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will
auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of
which the device or switch is capable. Distances of up to 500 meters
running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data
rate are supported between the adapter and an attaching device or switch.
When used with IBM supported Fibre Channel storage switches supporting
long-wave optics, distances of up to 10 kilometers are capable running at
either 1 Gps or 2 Gps data rates.
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach
devices either directly, or by means of Fibre Channel Switches. If
attaching a device or switch with a SC type fiber connector(s), use of an
LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron
Fiber Converter Cable (#2459) is required.
Refer to the following IBM storage subsystem Web page for additional
supported server attachment information for IBM devices.
http://www.storage.ibm.com/hardsoft/disk/products.htm
Consult with your IBM representative or Business Partner for
additional information relative to any third party attachment.
- Attributes provided: 1 Fibre Channel/FC-AL interface
- Attributes required: 1 empty PCI or PCI-X slot
- For 9111-285: (#6239)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#6258) 36/72GB 4mm Internal Tape Drive
The 36/72 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high,
single-ended 16-bit tape drive, which provides a high capacity for
save/restore and archive functions. This tape drive uses IBM 4-mm data
cartridges and is compression capable, providing a capacity of up to 72
GB - a significant increase in capacity over the previous 20/40 4-mm
internal tape drives (when using DDS-4 media).
Characteristics:
- Capacity: 36 GB native mode, 72 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: IBM 4-mm supports new DAT72 media
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression
- Interface: SCSI-2 LVD and single ended
Compatability:
- DDS3 - 12 GB native (Read/Write), 24 GB compression (Read/Write)
- DDS4 - 20 GB native (Read/Write), 40 GB compression (Read/Write)
- DAT72 - 36 GB native (Read/Write), 72 GB compression (Read/Write)
- Attributes provided: 4mm tape capability
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 LVD internal 16-bit address or SE
- For 9111-285: (#6258)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: No
- Return parts MES: Does not apply
(#6271) - LTO Ultrium 200GB Data Cartridge
(No Longer Available as of May 31, 2006)
LTO Ultrium 200GB Data Cartridge highlights By combining high storage
capacity (200 GB native, 400 GB with 2:1 compression), performance, and
reliability, the IBM Total Storage LTO Ultrium 200 GB Data Cartridges
continue the IBM focus on enhancing tape technology. The cartridge is
part of a long line of IBM data cartridges that help provide quality and
reliability for organizations around the world. The IBM Total Storage
LTO Ultrium 200 GB data cartridge, with a compressed capacity of up to
400 GB (2:1 compression), can be used in products featuring Ultrium 2
Tape Drives.
Characteristics:
- Provides capacity, performance and reliability for midrange and
network tape automated storage environments
- Contains half-inch metal particle tape; cartridges feature a native
data capacity of 200GB and a compressed data capacity of 400GB (2:1
compression)
- Includes a Linear Tape-Open Cartridge Memory (LTO - CM) chip that
contains cartridge specific information to communicate with Ultrium Tape
Drives during loading/unloading via a radio frequency component
- Attributes required: Storage conditions: 61-90F (16-32C);20-80% RH;
79F (26C) wet bulb max.
- Cartridge disposal: Classified as nonhazardous waste per EPA
regulation 40CFR261; can be disposed of as normal office trash.
- Attributes provided: Ultrium 1 and Ultrium 2 compatible
- Attributes required: LT02 Tape Drive and Tape operating conditions
between 50-104 F, (10-40C); 20-80% RH; 79F (26C) wet Bulb max.
- For 9111-285: (#6271)
- Minimum required: 0
- Maximum allowed: 5 (Initial order maximum: 5)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Yes
- Return parts MES: No
(#6279) - VXA-320 160/320GB Internal Tape Drive
The IBM 160/320 GB Internal Tape Drive with VXA* Technology is a
5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high
capacity for save/restore and archive functions. The tape drive uses "X"
media VXAtape* data cartridges and is compression capable, providing a
capacity of up to 320 GB - a significant increase in capacity, and data
transfer rate over the previous internal tape drives.
Characteristics
- Capacity: 160 GB native mode
- Capacity: 320 GB compress mode, typical
- Form Factor: 5.25-inch half high
- Media: uses VXAtape "X" media data cartridges
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 12 MBps native mode, 24MBps (typical)
compression
- Interface: SCSI-2,SCSI-3 Ultra 160 (LVD) asynchronous/synchronous
- VXA-320 is read/write capable on X23, X10 and X6 media
- Compatibility: VXA-2 format (Read/Write) on X6, X10, and X23,
VXA-320 format (Read/Write) on X6, X10, and X23.
- Attributes provided: One 160/320GB internal tape drive
- Attributes required: One 1.6-inch (41mm) half-high media bay and one
SCSI-2 internal 16-bit address
- For 9111-285: (#6279)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: No
- Return parts MES: Does not apply
(#6470) Power Cord (6-foot), To Wall (125V, 15A), Plug Type #4
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #4 (NEMA 5-15). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. 6-foot length. The
following countries/regions use the #6470 power cord to power the system
and/or peripheral features requiring a power cord: United States,
Antigua & Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia,
Bonnaire, Calicos Islands, Canada, Cayman Islands, Colombia, Costa Rica,
Cuba, Curacao, Dominican Republic, Ecuador, El Salvador, Guam, Guatemala,
Guyana, Haiti, Honduras, Jamaica, Japan, Mexico, Micronesia,
Montsderrrrat, Netherlands Antilles, Nicaragua, Panama, Peru,
Philippines, St. Kitts/Nevis, St. Martin, Taiwan, Tortola (BVI),
Trinidad/Tobago, Venezuela.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6470)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6471) Power Cord (9-foot), To Wall/OEM PDU,(125V, 15A), Plug Type #70
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #70 (iNMETRO NBR 6147, NEMA 5-15). Refer to
Corporate Bulletin C-B-2-4700-009 for a description of plug types. The
following countries/regions use the #6471 power cord to power the system
and/or peripheral features requiring a power cord: Brazil.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6471)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6472) Power Cord (9-foot), To Wall/OEM PDU,(250V, 16A), Plug Type #18
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #18 (CEE 7 VII). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6472 power cord to power the system and/or
peripheral features requiring a power cord: Afghanistan, Albania,
Algeria, Andorra, Angola, Armenia, Austria, Belarus, Belgium, Benin,
Bosnia/Herzegovina, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon,
Cape Verde, Central African Republic, Chad, Comoros, Conogo, Croatia,
Czech Republic, Dahomey, Djibuouti, Egypt, Equatorial Guinea, Eritrea,
Estonia, Etrhiopia, Finland, France, French Polynesia, French Guyana,
Gabon, Georgia, Germany, Greece, Guadeloupe, Guinea, Guinea-Bissau,
Hungary, Iceland, Indonesia, Iran, Ivory Coast, Kazakhstan, Krygystan,
Laos, Latvia, Lebanon, Lithuania, Luxembourg, Macau, Macedonia, Mali,
Martinigue, Mauritania, Mauritus, Mayotte, Moldova, Monaco, Mongolia,
Morocco, Mozambique, Netherlands, New Caledonia, Niger, North Korea (C19
only), Norway, Poland, Portugal, Principe, Reunion, Romania, Russia,
Rwanda, St. Thomas, Saudi Arabia, Senegal, Serbia, Slovenia, Somalia,
South Korea (C19 only), Spain, Surinam, Sweden, Syria, Tahiti,
Tajikistan, Togo, Tunesia, Turkey, Turkmenistan, Ukraine, Upper Volta,
Uzbekistan, Vanuatu, Vietnam, Wallis & Futuna, Zaire, Zimbabwe.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6472)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6473) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type 19
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #19 (CEE). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6473 power cord to power the system and/or
peripheral features requiring a power cord: Denmark.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6473)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6474) Power Cord (9-foot), To Wall/OEM PDU, (250V, 13A), Plug Type #23
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #23 (BS 1364A). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6474 power cord to power the system and/or
peripheral features requiring a power cord: Abu Dhabi, Bahrain,
Botswana, Brunei, Channel Islands, Cyprus, Dominica, Gambia, Grenada,
Grenadines, Guyana, Hong Kong, Iraq, Ireland, Jordan, Kenya, Kuwait,
Liberia, Malawi, Malaysia, Malta, Myanmar, Nkigeria, Oman, Qatar, Sierra
Leone, Singapore, St. Kitts, St. Lucia, Seychelles, Sudan, Tanzania,
Trinidad & Tobago, United Arab Emirates, United Kingdom, Yemen, Zambia.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6474)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6475) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #32
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #32 (SII 32-1971). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6475 power cord to power the system and/or
peripheral features requiring a power cord: Israel.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6475)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6476) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #24
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #24 (SEV 24507). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6476 power cord to power the system and/or
peripheral features requiring a power cord: Lichtenstein, Switzerland.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6476)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6477) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #22
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #22 (SABS 164). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6477 power cord to power the system and/or
peripheral features requiring a power cord: Bangladesh, LeSotho, Maceo,
Maldives, Nambia, Pakistan, Samoa, South Africa, Sri Lanka, Swaziland,
Uganda.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6477)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6478) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #25
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #25 (CEI 23-16). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6478 power cord to power the system and/or
peripheral features requiring a power cord: Chile, Italy, Libya.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6478)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6487) Power Cord (6-foot), To Wall, (250V, 15A), United States, Plug Type #5
(No Longer Available as of May 27, 2011)
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #5 (NEMA 6-15). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. 6-foot length. The
following countries/regions use the #6487 power cord to power the system
and/or peripheral features requiring a power cord: United States,
Anguilla, Antigua & Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda,
Bolivia, Bonnaire, Caicos Is., Canada, Cayman Islands, Colombia, Costa
Rica, Cuba, Curacao, Dominican Republic, Ecuador, El Salvador, Guam,
Guatamala, Haiti, Honduras, Jamaica, Japan, Micronesia, Montserrat,
Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, St. Marten
NA, Taiwan, Tortola (BVI), Thailand, Venezuela.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6487)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6488) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A or 250V, 10A), Plug Type #2
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Refer to Corporate Bulletin C-B-2-4700-009 for a
description of plug types. The following countries/regions use the #6488
power cord to power the system and/or peripheral features requiring a
power cord: Argentina Paraguay Uruguay
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6488)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6493) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #62
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #62 (GB 1053). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6493 power cord to power the system and/or
peripheral features requiring a power cord: People's Republic of China.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6493)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6494) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #69
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #69 (IS 6538). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6494 power cord to power the system and/or
peripheral features requiring a power cord: India.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6494)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6495) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #73
(No longer available as of August 29, 2008)
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #73. Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6495 power cord to power the system and/or
peripheral features requiring a power cord: Brazil.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6495)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6496) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #66
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #66 (KETI). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6496 power cord to power the system and/or
peripheral features requiring a power cord: North Korea, South Korea.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6496)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6574) Ultra320 SCSI 4-Pack
(No Longer Available as of May 28, 2010)
This feature provides an enclosure that can contain up to 4 Ultra3
SCSI disk drives.
- Attributes provided: Enclosure for up to 4 disk drives
- Attributes required: Empty enclosure location.
- For 9111-285: (#6574)
- Minimum required: 1
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#6585) DASD Locking Kit
(No Longer Available as of December 12, 2008)
This feature number provides a mechanism that will lock four hot-swap
disk drive bays in place and not allow the disk drives to be removed from
the system until unlocked.
- Attributes provided: DASD Locking Kit
- Attributes required: DASD 4-pack
- For 9111-285: (#6585)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6598) Disk Slot Fillers (Quantity 4)
This feature allows the customer to move disks from the system to
another system or an IO drawer and to place a blank disk filler in the
empty disk slot. Systems shipped from manufacturing have blank filler in
the empty disk slots.
- Attributes provided: 4 disk slot fillers
- Attributes required: None
- For 9111-285: (#6598)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6651) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #75
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #75 (KETI). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6651 power cord to power the system and/or
peripheral features requiring a power cord: Taiwan.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6651)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6659) Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug Type #76
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #76 (KETI). Refer to Corporate Bulletin
C-B-2-4700-009 for a description of plug types. The following
countries/regions use the #6659 power cord to power the system and/or
peripheral features requiring a power cord: Taiwan.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6659)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6670) Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59 (DENAN marking)
(No longer available as of August 29, 2008)
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #59 (NEMA 5-15). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length.
This power cord meets the DENAN marking requirement in Japan.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6670)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6680) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #6, Insulated
This insulated power cord goes from the system and/or peripheral
features to a wall-type outlet. Plug type #6 (AS 3112-1964 NZS 198).
Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug
types. The following countries/regions use the #6479 power cord to power
the system and/or peripheral features requiring a power cord: Australia,
Fiji Islands, Kiribati, Nauru, New Zealand, Papua New Guinea, W. Samoa.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6680)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#6687) Power Cord (6-foot), To Wall, (250V, 15A), Plug Type #57 (DENAN marking)
(No longer available as of August 29, 2008)
This power cord goes from the system and/or peripheral features to a
wall-type outlet. Plug type #57 (NEMA 6-15). Refer to Corporate
Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length.
This power cord meets the DENAN marking requirement in Japan.
- Attributes provided: Power cord
- Attributes required: None
- For 9111-285: (#6687)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#7305) AAP Software Pre-Install Indicator
Software pre-install indicator for Authorized Assemblers
- Attributes provided: Software Preinstall
- Attributes required: Authorized Assembler Order
- For 9111-285: (#7305)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#7319) One Processor Entitlement for Processor Feature # 8327
This feature number will permanently entitle one processor on a #8327
processor card.
- Attributes provided: Entitlement of processor for #8327
- Attributes required: Feature #8327 with non-entitled processor
- For 9111-285: (#7319)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#7320) One Processor Entitlement for Processor Feature #8330
This feature number will permanently entitle one processor on a #8330
processor card.
- Attributes provided: Entitlement of processor for #8330
- Attributes required: Feature #8330 with non-entitled processor
- For 9111-285: (#7320)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#7336) - One Processor Entitlement for Processor Feature #5326
This feature number will permanently entitle one processor on a #5326
processor card.
- Attributes provided: Entitlement of processor for #5326
- Attributes required: Feature #5326 with non-entitled processor
- For 9111-285: (#7336)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#7339) - One Processor Entitlement for Processor Feature #5327
This feature number will permanently entitle one processor on a #5327
processor card.
- Attributes provided: Entitlement of processor for #5327
- Attributes required: Feature #5327 with non-entitled processor
- For 9111-285: (#7339)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2 )
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#7801) Ethernet Cable, 6M, Hardware Management Console to System Unit
(No Longer Available as of January 4, 2010)
This feature provides a six meter long Ethernet cable for attachment
of a Hardware Management Console to the system unit.
- Attributes provided: 6M Ethernet Cable
- Attributes required: Ethernet port on Hardware Management Console
- For 9111-285: (#7801)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#7802) Ethernet Cable, 15M, Hardware Management Console to System Unit
This feature provides a fifteen meter long Ethernet cable for
attachment of a Hardware Management Console to the system unit.
- Attributes provided: 15M Ethernet Cable
- Attributes required: Ethernet port on Hardware Management Console
- For 9111-285: (#7802)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#7877) Media Backplane
(No Longer Available as of May 28, 2010)
This feature is required to support the system control panel and any
IDE media device installed in the system.
- Attributes provided: IDE Media Backplane Card
- Attributes required: None
- For 9111-285: (#7877)
- Minimum required: 1
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter
(No Longer Available as of June 23, 2006)
This cable provides attachment between the 128-port Asynchronous
Controller and the first RAN in a daisy chain, or attachment between RANs
in the daisy chain.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 9111-285: (#8131)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
(No Longer Available as of June 23, 2006)
This cable may be substituted for the 4.5 meter (15 foot) async
controller cable whenever a customer configuration requires stacked
Remote Async Nodes.
- Attributes provided: Links 128-port Async Controller to RAN or
RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN
connection in a daisy chain.
- For 9111-285: (#8132)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8133) RJ-45 to DB-25 Converter Cable
(No Longer Available as of November 26, 2010)
This cable can be used to attach EIA-232 devices to the 16 port EIA
232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async
subsystem. This cable provides a 25-pin D shell connector for device
attachment. Four cables are provided per each order.
- Attributes provided: 4 DB-25 EIA-232 ports
- Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)
- For 9111-285: (#8133)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8136) Rack Mountable Remote Asynchronous Node 16-Port EIA-232
The Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (RAN) is a
modified version of the existing 16-port Remote Async Node (feature #8130
or 8134) in an industry-standard 19-inch rack mount chassis to allow
simpler installation and ease-of-use. Like the existing RAN, it can also
be configured as a desktop device.
As an additional benefit, the metal chassis meets FCC Class B/CISPR B
when used with similarly rated RS/6000 host to meet the needs of
customers with these requirements.
The RANs provide 16 ports of EIA-232 capability with full modem
controls on each port and are connected to the 128-port Async Controller
(Micro Channel or ISA versions) residing in the host. RANs are connected
in daisy-chain fashion up to 8 RANs per 128-port Async Controller (either
version).
The rack-mountable RAN offers these enhanced features:
- Industry-standard 19-inch rack mountable chassis (can be configured
for stacking on a desktop or mounted in a 19-inch rack).
- Meets FCC Class B/CISPR B when used with similarly rated RS/6000
host.
- All RJ-45 connectors are now on the front panel, greatly enhancing
cable management.
- The DB-15 synchronous connectors (cabling from host to RAN and
between RANs) and the power cord and switch are located on the rear
panel.
- Power supply is self contained within the unit.
The rack-mountable RAN offers these same features as the existing RAN
product:
(#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232
Provides remote connection of up to 16 EIA-232 devices to a 128-Port
Asynchronous Controller.
Each port can be individually programmed to provide a asynchronous
connection of 230 Kbaud, but a limited number of ports in a maximum
configuration (128 ports) can be supported at this baud rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per
synchronous line) with either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line
station, and other diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD,
RxD, RTS, CTS, DSR, DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity
four per order) currently used on the existing RANs can be used to attach
devices having a DB-25 connector to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of up to 31
meters (100 feet), depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature
#8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps)
from host using standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the
distance and allows location of RANs at geographically distant location
from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One 128-port adapter per eight (#8137s)
- For 9111-285: (#8137)
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Support
- CSU: Yes
- Return parts MES: Does not apply
(#8227) Tie-down Strap Security Device
(No Longer Available as of May 28, 2010)
The tie-down strap is used as an aid in securing the system unit and
connects the system unit via a cable to a more secure item such as a
desk, wall fixture, etc.
- Attributes provided:
- Attributes required:
- For 9111-285: (#8227)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8231) Memory Offering 32GB/64GB/96GB/128GB (Multiples of 4 of 2x4GB DIMMs
(No Longer Available as of May 27, 2011)
Each occurrence of this feature delivers 2 each 4GB, 276 pin Dimms for
a total of 8GB of Memory (533 MHz, DDR2, SDRAM). This is a special
priced feature that can only be ordered in multiples of 4. The minimum
result being 32 GB of memory in 8 (4GB) dimms. This feature must be
ordered in quantities of 4, 8, 12 or 16. No other order quantities will
be accepted.
Note: MES orders for feature number 8231 are available only for
authorized IBM Business Partners certified for participation in the IBM
Solution Delivery Integration (SDI) Program.
- Attributes provided: DDR2 Memory
- Attributes required: DDR2 dimm slots
- For 9111-285: (#8231)
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8244) Audio PCI Adapter for Workstations
(No longer available as of February 29, 2008)
The Audio PCI Adapter for Workstations is a high performance
workstation class audio PCI adapter that is optimized for support in the
AIX professional workstation environment and their associated
applications. It is 3.3 volt, 32 bit PCI adapter that runs at 33MHz
speed and complies with the Intel AC 1997 Version 2.1 Specifications.
The Audio PCI Adapter for Workstations provides external jacks for
headphones, speaker output, line input, and microphone input as well as
an internal connector for CD or DVD drive audio input.
- Attributes provided: One Audio PCI Adapter with internal and
external audio connectors
- Attributes required: One available PCI slot
- For 9111-285: (#8244)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8327) 1-core 1.65 GHz POWER5+ Processor Card, 36MB L3 Cache
(No Longer Available as of February 12, 2007)
1-core processor card with 1.65 GHz POWER5+ processor and 36MB of L3
cache. Attached to planar.
- Attributes provided: 1-core processor card, 36MB L3 cache.
- Attributes required: None
- For 9111-285: (#8327)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8330) 2-core 1.9 GHz POWER5+ Processor Card, 36MB L3 Cache
(No Longer Available as of February 12, 2007)
2-core processor card with 1.9 GHz POWER5+ processor and 36MB of L3
cache. Attached to planar.
- Attributes provided: 2-core processor card, 36MB L3 cache.
- Attributes required: None
- For 9111-285: (#8330)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#8402) - Zero-priced Processor Entitlement for #5326
This feature number provides a customer with one processor entitlement
at no additional charge. Available only with Express Product Offerings.
- Attributes provided: One processor entitlement for #5326
- Attributes required: Qualifying Express Product Offering
- For 9111-285: (#8402)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8403) - Zero-priced Processor Entitlement for #5327
This feature number provides a customer with one processor entitlement
at no additional charge. Available only with Express Product Offerings.
- Attributes provided: One processor entitlement for #5327
- Attributes required: Qualifying Express Product Offering
- For 9111-285: (#8403)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1 )
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8409) Zero-priced Express Product Offering Processor Entitlement for #8327
This feature number provides a customer with one processor entitlement
at no additional charge. Available only with an Express Product
Offering.
- Attributes provided: One processor entitlement for #8327
- Attributes required: Qualifying Express Product Offering
- For 9111-285: (#8409)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8410) Zero-priced Express Product Offering Processor Entitlement for #8330
This feature number provides a customer with one processor entitlement
at no additional charge. Available only with an Express Product
Offerings.
- Attributes provided: One processor entitlement for #8330
- Attributes required: Qualifying Express Product Offering
- For 9111-285: (#8410)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8422) SpaceBall 3D Input Device
(No Longer Available as of November 20, 2007)
SpaceBall is a 3D input device that allows a customer to view a
computer-generated model from many angles. By applying fingertip control
to push, pull, and twist the ball, you manipulate the image on the
screen. Spaceball facilitates zooming, panning, and rotating.
- Attributes provided: SpaceBall 3D Input Device
- Attributes required: Asynch adapter installed in the system
- For 9111-285: (#8422)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Supported
- CSU: Yes
- Return parts MES: No
(#8423) Magellan XT 3D Input Device
(No Longer Available as of November 20, 2007)
The Magellan XT 3D Input Device is a high-level 3D input device which
provides real-time 3D motion control for increased productivity, better
design comprehension, and early detection of design errors.
- Attributes provided: Magellan XT 3D Input Device
- Attributes required: Asynch adapter installed in the system
- For 9111-285: (#8423)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Supported
- CSU: Yes
- Return parts MES: No
(#8424) SpaceBall 3D Input Device (USB)
(No Longer Available as of July 27, 2007)
SpaceBall is a 3D input device that allows a customer to view a
computer-generated model from many angles. By applying fingertip control
to push, pull, and twist the ball, you manipulate the image on the
screen. SpaceBall facilitates zooming, panning, and rotating. RoHS
compliant. Attaches to USB port.
- Attributes provided: SpaceBall 3D Input Device
- Attributes required: Available USB port
- For 9111-285: (#8424)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8425) SpaceMouse 3D Input Device (USB)
(No Longer Available as of July 27, 2007)
The SpaceMouse 3D Input Device is a high-level 3D input device which
provides real-time 3D motion control for increased productivity, better
design comprehension, and early detection of design errors. By applying
fingertip control to push, pull, and twist the ball, you manipulate the
image on the screen. RoHS compliant. Attaches to USB port.
- Attributes provided: SpaceMouse 3D Input Device
- Attributes required: Available USB port
- For 9111-285: (#8425)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8426) - SpacePilot 3D Input Device
(No Longer Available as of January 2, 2009)
The SpacePilot 3D Input Device is a high-level 3D motion controller
which enables the user to manipulate 3D models and 3D cameras naturally
and intuitively with up to six degrees of freedom of control to
simultaneously pan, zoom, and rotate 3D objects in every direction.
The SpacePilot is:
Autosensing -- Automatically senses application and mode the user is
working with and displays input information on the unit's LCD.
Adaptive -- Automaticallly adapts to changes in the application or in
the tasks so the user is presented with the correct functions when they
are needed.
Extendable -- Users can take advantage of the SpacePilot's ability to
easily program an unlimited number of commands, in addition to the pre-
programmed commands.
Attaches to USB port.
- Attributes provided: SpacePilot 3D Input Device
- Attributes required: Available USB port
- For 9111-285: (#8426)
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2 )
- OS level required: AIX 5.2 or AIX 5.3, or later.
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8800) Quiet Touch Keyboard - USB, Business Black, US English, #103P
(No Longer Available as of January 26, 2007)
This feature provides a USB attached US English #103P keyboard. The
two built-in USB ports conveniently provide for additional expansion.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8800)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8801) Quiet Touch Keyboard - USB, Business Black, French, #189
(No Longer Available as of January 26, 2007)
This feature provides a USB attached French #189 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8801)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8802) Quiet Touch Keyboard - USB, Business Black, Italian, #142
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Italian #142 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8802)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8803) Quiet Touch Keyboard - USB, Business Black, German/Austrian, #129
(No Longer Available as of January 26, 2007)
This feature provides a USB attached German/Austrian #129 keyboard.
The two built-in USB ports conveniently provide for additional expansion.
Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8803)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8804) Quiet Touch Keyboard - USB, Business Black, UK English, #166
(No Longer Available as of January 26, 2007)
This feature provides a USB attached UK English #166 keyboard. The
two built-in USB ports conveniently provide for additional expansion.
Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8804)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8805) Quiet Touch Keyboard - USB, Business Black, Spanish, #172
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Spanish #172 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8805)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8806) Quiet Touch Keyboard - USB, Business Black, Japanese, #194
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Japanese #194 keyboard. The two
built-in USB ports conveniently provide for additional expansion.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8806)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8807) Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Brazilian Portuguese #275
keyboard. The two built-in USB ports conveniently provide for additional
expansion. Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8807)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8808) Quiet Touch Keyboard - USB, Business Black, Canadian French, #058
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Canadian French #058 keyboard.
The two built-in USB ports conveniently provide for additional expansion.
Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8808)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8810) Quiet Touch Keyboard - USB, Business Black, Belgian/Dutch, #120
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Belgian/Dutch #120 keyboard. The
two built-in USB ports conveniently provide for additional expansion.
Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8810)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8811) Quiet Touch Keyboard - USB, Business Black, Swedish/Finnish, #153
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Swedish/Finnish #153 keyboard.
The two built-in USB ports conveniently provide for additional expansion.
Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8811)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8812) Quiet Touch Keyboard - USB, Business Black, Danish, #159
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Danish #159 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8812)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8813) Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Bulgarian #442 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8813)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8814) Quiet Touch Keyboard - USB, Business Black, Swiss/French/German, #150F/G
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Swiss/French/German #150F/G
keyboard. The two built-in USB ports conveniently provide for additional
expansion. Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8814)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8816) Quiet Touch Keyboard - USB, Business Black, Norwegian, #155
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Norwegian #155 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8816)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8817) Quiet Touch Keyboard - USB, Business Black, Dutch, #143
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Dutch #143 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8817)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8818) Quiet Touch Keyboard - USB, Business Black, Portuguese, #163
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Portuguese #163 keyboard. The
two built-in USB ports conveniently provide for additional expansion.
Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8818)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8819) Quiet Touch Keyboard - USB, Business Black, Greek, #319
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Greek #319 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8819)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8820) Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Hebrew #212 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8820)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8821) Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Hungarian #208 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8821)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8823) Quiet Touch Keyboard - USB, Business Black, Polish, #214
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Polish #214 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8823)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8825) Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Slovakian #245 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8825)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8826) Quiet Touch Keyboard - USB, Business Black, Czech, #243
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Czech #243 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8826)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8827) Quiet Touch Keyboard - USB, Business Black, Turkish, #179
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Turkish #179 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8827)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8829) Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171
(No Longer Available as of January 26, 2007)
This feature provides a USB attached LA Spanish #171 keyboard. The
two built-in USB ports conveniently provide for additional expansion.
Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8829)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8830) Quiet Touch Keyboard - USB, Business Black, Arabic, #238
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Arabic #238 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8830)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8833) Quiet Touch Keyboard - USB, Business Black, Korean, #413
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Korean #413 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8833)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8834) Quiet Touch Keyboard - USB, Business Black, Chinese/US, #467
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Chinese/US #467 keyboard. The
two built-in USB ports conveniently provide for additional expansion.
Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8834)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8835) Quiet Touch Keyboard - USB, Business Black, French Canadian, #445
(No Longer Available as of January 26, 2007)
This feature provides a USB attached French Canadian #445 keyboard.
The two built-in USB ports conveniently provide for additional expansion.
Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8835)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8836) Quiet Touch Keyboard - USB, Business Black, Thai, #191
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Thai #191 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8836)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8838) Quiet Touch Keyboard - USB, Business Black, Russian, #443
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Russian #443 keyboard. The two
built-in USB ports conveniently provide for additional expansion. Not
available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8838)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8839) Quiet Touch Keyboard - USB, Business Black, Yugoslavian/Latin, #105
(No Longer Available as of January 26, 2007)
This feature provides a USB attached Yugoslavian/Latin #105 keyboard.
The two built-in USB ports conveniently provide for additional expansion.
Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8839)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8840) Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P
(No Longer Available as of January 26, 2007)
This feature provides a USB attached US English #103P (EMEA) keyboard.
The two built-in USB ports conveniently provide for additional expansion.
Not available in Japan.
- Attributes provided: Keyboard
- Attributes required: USB Port
- For 9111-285: (#8840)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8841) Mouse - USB, Business Black with Keyboard Attachment Cable
(No Longer Available as of December 31, 2009)
This feature provides a three button USB mouse and a cable for
attachment to a keyboard.
- Attributes provided: 3-Button USB Mouse
- Attributes required: Keyboard with USB Mouse Attachment Port
- For 9111-285: (#8841)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#8845) - USB Mouse
The optical LED USB Mouse has 2 buttons and a scroll wheel that acts
as a third button. Mouse cable is 1.8 meters long. OS does not support
scrolling with the wheel. Business black with red scroll wheel.
- Attributes provided: 2-Button USB Mouse w/scroll wheel that acts as
3rd button.
- Attributes required: USB attachment Port
- For 9111-285: (#8845)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No
(#9004) Southern Hemisphere Designator for Monitors
Specifies that southern hemisphere models are required for all CRT
monitors on the initial plant order or on MES orders. Not required with
TFT monitors.
- Attributes provided: None
- Attributes required: Monitor
- For 9111-285: (#9004)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
(#9300) Language Group Specify - US English
English language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9300)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9700) Language Group Specify - Dutch
Dutch language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9700)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9703) Language Group Specify - French
French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9703)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9704) Language Group Specify - German
German language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9704)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9705) Language Group Specify - Polish
Polish language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 9111-285: (#9705)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9707) Language Group Specify - Portuguese
Portuguese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9707)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9708) Language Group Specify - Spanish
Spanish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9708)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9711) Language Group Specify - Italian
Italian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9711)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9712) Language Group Specify - Canadian French
Canadian French language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9712)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9714) Language Group Specify - Japanese
Japanese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9714)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9715) Language Group Specify - Traditional Chinese (Taiwan)
Traditional Chinese language group for Nomenclature and Standard
Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9715)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9716) Language Group Specify - Korean
Korean language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9716)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9718) Language Group Specify - Turkish
Turkish language group for nomenclature and publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9718)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9719) Language Group Specify - Hungarian
Hungarian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 9111-285: (#9719)
- Minimum required:
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9720) Language Group Specify - Slovakian
Slovakian language group for Nomenclature and Standard Publications.
- Attributes provided: none
- Attributes required: none
- For 9111-285: (#9720)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9721) Language Group Specify - Russian
Russian language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9721)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9722) Language Group Specify - Simplified Chinese (PRC)
Simplified Chinese language group for nomenclature and standard
publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9722)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9724) Language Group Specify - Czech
Czech language group for nomenclature and standard publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9724)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9725) Language Group Specify -- Romanian
Romanian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9725)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
(#9727) Language Group Specify -- Slovenian
Slovenian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 9111-285: (#9727)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Does not apply
- Return parts MES: Does not apply
Not available.
Back to top
None.
Customer Replacement Parts
Not available.
Back to top
Not available.
Back to top
None.
Supplemental Media
Not available.
Trademarks
(R), (TM), * Trademark or registered trademark of International
Business Machines Corporation.
** Company, product, or service name may be a trademark or service
mark of others.
Windows is a trademark of Microsoft Corporation.
© IBM Corporation 2011.
Back to top
Product Life Cycle Dates
