IBM Announcement Letter No. ZG92-0103 dated January 21, 1992.
The IBM RISC System/6000(TM) POWERstation/POWERserver 220 is designed to be an entry desktop workstation or server and is binary compatible with the IBM RISC System/6000 POWERstation/POWERserver family of systems. The POWERstation/POWERserver 220 features a POWER* Single Chip processor. Configurations without a disk or with 160 MB Disk Drives are available for LAN-dependent environments.
The POWERstation/POWERserver 220 has integrated SCSI and Ethernet controllers. It has extensive growth capability with up to 64 MB of error checking and correction (ECC) memory, internal fixed disk of up to 400 MB, up to a maximum of seven SCSI devices (including an optional internal fixed disk drive) on the SCSI bus, an optional 2.88 MB diskette drive, a POWER Gt1 graphics adapter slot, and two 32-bit Micro Channel(TM) card slots for optional features.
The models 22W and 22G are designed to meet customer needs for low-priced, special-purpose, "preconfigured" models without limiting customers' ability to add to the configuration to satisfy their unique requirements.
The POWER Gt1, an entry mono (1-bit per pixel) graphics adapter is also announced. This adapter supports both 1280 x 1024 and 1024 x 768 displays. VRAM options allow the POWER Gt1 to be configured as 4-bit or 8-bit frame buffers (for grayscale and colour).
* Performance Optimization With Enhanced RISC
(TM) Trademark of International Business Machines Corporation
Planned General Availability Date is April 1992.
Description Machine Partnumber
------------------------ ------- ----------
RISC System/6000
POWERstation/POWERserver 7011 220
POWERstation 7011 22W
POWERstation 7011 22G
4 MB SIMM Memory (Note 1) 4002
8 MB SIMM Memory (Note 1) 4003
160 MB SCSI Disk Drive 2121
400 MB SCSI Disk Drive 2560
160 MB to 400 MB SCSI Disk Select 2563
(POWERstation 22W only)
5-Inch 2.88 MB Diskette Drive 2610
SCSI Device-to-Device Cable 3130
Integrated SCSI External Device Cable 2833
8-Port Async Adapter - EIA-232 2930
Multiport Interface Cable 2995
Async Cable EIA-232/V.24 2936
16-Port Async Adapter - EIA-232 2955
16-Port Interface Cable - EIA-232 2996
X.25 Interface Co-Processor/2 2960
X.25 Attachment Cable - X.21 - 3 meter 2965
X.25 Attachment Cable - V.24 - 3 meter 2966
X.25 Attachment Cable - V.35 - 3 meter 2967
V.35 Pin Adapter - (France Only) 2703
Printer/Terminal Interposer EIA-232 2937
PC Parallel Printer Cable 3100
Token-Ring High-Performance Network Adapter 2970
with cable
Token-Ring Cable (Same as cable included
with Feature Number 2970) 4218
3270 Connection Adapter 2991
POWER Gt3 2777 POWER Gt1 4208 POWER Gt1 VRAM Upgrade 4209 6091 Attachment Cable 4217 Ethernet 10Base2 Transceiver 4223 Ethernet 10BaseT Transceiver 4224
: Keyboard - U.S. 101 Keys 6010 Keyboard - 102 Keys (Belgian-Dutch/French) 6011 Keyboard - 102 Keys (Canadian French) 6012 Keyboard - 102 Keys (Danish) 6013 Keyboard - 102 Keys (Finnish/Swedish) 6014 Keyboard - 102 Keys (German) 6016 Keyboard - 102 Keys (French) 6015 Keyboard - 102 Keys (Italian) 6017 Keyboard - 102 Keys (Norwegian) 6019 Keyboard - 102 Keys (Portuguese) 6020 Keyboard - 102 Keys (Spanish) 6021 Keyboard - 102 Keys (Swiss) 6022 Keyboard - 102 Keys (United Kingdom-English) 6023 Keyboard - 102 Keys (Icelandic) 6024 Keyboard - 102 Keys (Turkish) 6025 Keyboard - 102 Keys (Greek) 6026 Keyboard - 102 Keys (Hebrew) 6027 Keyboard - 102 Keys (Arabic) 6028 3-Button Mouse 6041
The following keyboards are available for POWERstations 22W and 22G only. Keyboard: Keyboard - U.S. 101 Keys 9010 Keyboard - 102 Keys (Belgian-Dutch/French) 9011 Keyboard - 102 Keys (Canadian French) 9012 Keyboard - 102 Keys (Danish) 9013 Keyboard - 102 Keys (Finnish/Swedish) 9014 Keyboard - 102 Keys (French) 9015 Keyboard - 102 Keys (German) 9016 Keyboard - 102 Keys (Italian) 9017 Keyboard - 102 Keys (Norwegian) 9019 Keyboard - 102 Keys (Portuguese) 9020 Keyboard - 102 Keys (Spanish) 9021 Keyboard - 102 Keys (Swiss) 9022 Keyboard - 102 Keys (United Kingdom-English) 9023 Keyboard - 102 Keys (Icelandic) 9024 Keyboard - 102 Keys (Turkish) 9025 Keyboard - 102 Keys (Greek) 9026 Keyboard - 102 Keys (Hebrew) 9027 Keyboard - 102 Keys (Arabic) 9028
Power cord, Belgium, Finland, France, Germany, 9820
Netherlands, Norway, Portugal,
Spain, Sweden
Power cord, Denmark 9821
Power cord, United Kingdom 9825
Power cord, Israel 9827
Power cord, Switzerland 9828
Power cord, South Africa/Pakistan 9829
Power cord, Italy 9830
Language Group - U. S. English 9300 Language Group - Dutch 9700 Language Group - French 9703 Language Group - German 9704 Language Group - Norwegian 9706 Language Group - Portuguese 9707 Language Group - Spanish 9708 Language Group - Swedish 9709 Language Group - Italian 9711 Language Group - French/Belgian 9713 AIX Operating System Preload (Note 2) 5005pairs. Note 2: The preload feature can only be ordered with the initial system plant order and requires a fixed disk of 400 MB capacity on the system.
The POWERstation/POWERserver 200 series supports customers' business objectives by providing a low-priced, high-performance, single-chip processor desktop workstation/server solution for compute-intensive technical applications or multi-user commercial server applications. Memory capacity of up to 64 MB and internal fixed disk capacity of up to 400 MB, coupled with a variety of input/output devices, graphics, and communications features, are available to configure the system as a powerful, low-priced, entry POWERstation or POWERserver for a wide range of business solutions.
The POWERstation/POWERserver 200 series desktop workstations utilize IBM's POWER Architecture and are binary compatible with the AIX/6000 3.2 operating system, application portability, and high throughput levels. The POWERstation/POWERserver 220, with AIX/6000 3.2, conforms to many industry standards in the open system environment -- a key factor to enable customers to develop and port applications.
The entry POWERstation/POWERserver can function without a fixed disk in a LAN environment or, with a fixed disk and diskette drive added, in a standalone environment. Customers can upgrade memory and add features to enhance the system.
Standard features for the POWERstation/POWERserver 220 are:
The integrated ethernet controller will attach to Thick Ethernet, for connection to twisted pair the Ethernet 10BaseT transceiver (#4244) is required, for connection to thin Ethernet the 10Base2 transceiver (#4223) is required.
The Ethernet 10BaseT Transceiver (twisted pair) (#4224) provides the complete Attachment Unit Interface (AUI) to a twisted pair LAN connection. It is connected to a 15-pin DIX Ethernet connection via a transceiver (AUI) cable and converts the signal to 10BaseT. The medium connection is made through an RJ-45 receptacle.
Features include:
The Ethernet 10Base2 Transceiver (thin cable, #4223) is compatible with Ethernet/IEEE 802.3 transceiver specifications and 10 Mbps Ethernet CSMA/CD operation, to provide a connection to thin Ethernet coaxial cable (10Base2). It is connected to a 15-pin DIX Ethernet connection via a transceiver (AUI) cable and converts the signal to 10Base2. The medium connection is made through a BNC coaxial connector.
Features include:
Specially-priced preconfigured models are available through ordering the standard model configurations defined below.
The entry workstation can operate in a LAN environment or, with a diskette drive, in a standalone environment. Customers can upgrade memory and disk capacity and choose a colour or monochrome display to enhance the workstation.
This model is appropriate for desktop publishing, CASE, student workstations, or other environments where low-cost RISC workstations are appropriate.
Specify POWERstation 22W to order the workstation. The standard features for the POWERstation 22W are the same as the POWERstation/POWERserver 220 with the following additional features:
__________
Note: The 160 MB fixed disk is for use in LAN environments, where the disk is used for paging, the 400 MB fixed disk is recommended for standalone environments.
Note: A diskette drive is required in a standalone environment for diagnostic purposes. In LAN environments one of the systems on the LAN must have a diskette drive.
Note: The POWER Gt1 is a low-priced 1-bit graphics frame buffer that attaches directly to the local processor I/O bus. It supports resolutions of 1280 x 1024 or 1024 x 768 and does not require a Micro Channel slot.
Characteristics:
Performance:
The performance values shown below were measured at the adapter hardware interface and do not include software overhead. The measurements were taken using the following test definition - 10 pixel randomly oriented vectors in screen co-ordinates written directly to the hardware interface.
2D Vectors - 200,000 vectors/second
The POWER Gt1 is standard in the POWERstation 22W.
The POWER Gt1 VRAM Upgrade is an optional feature that is installed on a POWER Gt1. This upgrade is factory- or field-installable. Up to two upgrades can be installed on a POWER Gt1. The POWER Gt1 is upgraded to a 4-bit graphics (16 gray shades or colours) frame buffer with the installation of a single VRAM Upgrade. The POWER Gt1 is upgraded to an 8-bit graphics (256 colours) frame buffer when a second VRAM Upgrade is installed.
This model is intended for customers using graphics applications such as CADAM or Entry Circuit Design.
To order a system suitable for the graphics user, specify POWERstation 22G.
Standard features for the POWERstation 22G are the same as the POWERstation/POWERserver 220 with the following additional features:
Note: The POWER Gt3 adapter supports 256 colours and is rated at 600,000 2-D vectors per second, supporting Personal graPHIGS(TM) and OSF/Motif* interfaces (see IBM Announcement Letter ZG91-0244).
The POWERstation/POWERserver 200 series supports AIXwindows(TM) Environment/6000, which is based on the MIT (Massachusetts Institute of Technology) Xwindows, and includes a graphical user interface based on OSF/Motif(1). Through the use of Industry Standard OSF/Motif, savings may be realized in end user training and application development. Additionally, savings in hardware may be realized through the use of LAN-attached X-stations, to reduce per seat cost.
The POWERstation/POWERserver 200 series, with AIX/6000 3.2, offers interoperability with other IBM and other vendor host systems, helping to protect the customer's principal investment.
(TM) Trademark of International Business Machines
Corporation
(1) Trademark of Open Software Foundation
The POWERstation/POWERserver 200 series, with its POWER Single Chip processor offers competitive fixed-point processing and floating-point processing for the entry workstation market. The POWERstation/POWERserver 200 series can be configured as a diskless or dataless system with integrated SCSI and integrated Ethernet controllers. It can also be configured as an independent workstation with its optional feature offerings.
Customers can select AIXwindows Environment/6000, based on the versatile OSF/Motif graphics user interface, which provides the user with icons to represent the AIX file system and allows the user to manipulate the file system through the icons. Support for InfoExplorer(TM), the online documentation aid, offers the user flexible access to online documentation using task index, hypertext jump points, and search features.
(TM) InfoExplorer is a Trademark of International Business Machines Corporation
A system installation and management facility is provided as part of the operating system. The System Management Interface Tool (SMIT) facilitates the performance of system management tasks, such as software installation and configuration, device configuration and management, problem determination, and storage management. Support is also provided for the use of an ASCII terminal as the system console as well as remote installation of the system on a LAN.
AIX/6000 3.2 is designed to meet the NCSC (National Computer Security Center) trusted computer system evaluation criteria class C2 security support requirements.
The POWERstation/POWERserver 200 series is designed to grow with the customer's low-priced, entry requirements. Memory can be increased up to 64 MB. Eight memory SIMM slots are available to yield 64 MB with eight 8 MB PS/2(TM) memory SIMM's. The PS/2 Memory SIMM's are available in 4 and 8 MB, and must be installed in pairs. Error Correction Code (ECC) is used instead of parity to improve system reliability. A maximum of seven SCSI devices (including optional internal fixed disk drive) can be attached.
One internal disk drive may be installed in the POWERstation/POWERserver 200 series. Either a 160 MB or 400 MB drive is available.
One integrated SCSI controller that allows up to 7 SCSI devices, one integrated Ethernet controller, and the POWER Gt1 adapter slot allow the user to have a LAN attachment and additional I/O devices and graphics without utilizing either of the two Micro Channel(TM) slots.
The POWER Gt1 VRAM Upgrade is an optional feature that can be installed on a POWER Gt1. This upgrade is factory- or field-installable. Up to two upgrades can be installed on a POWER Gt1. The POWER Gt1 is upgraded to a 4-bit graphics (16 gray shades or colours) frame buffer with the installation of a single VRAM Upgrade. The POWER Gt1 is upgraded to an 8-bit graphics (256 colours) frame buffer when a second VRAM Upgrade is installed.
Two Micro Channel feature card slots (form factor 3) are available for additional features such as communications processors and high-performance graphics processors.
COMPARISON TABLE
The following table provides performance and other information about desktop models of the RISC System/6000 family.
Performance values shown in the following table were obtained in a controlled environment based on the use of specific data, and therefore the results obtained in other operating environments may vary significantly. Each user should verify the applicable data for their specific environment.
RISC SYSTEM/6000
MODEL 220 320H 340 350
CLOCK SPEED (MHZ) 33 25 33 41
PERFORMANCE(1)
SPECmark 25.9 43.4 56.6 71.4
SPECint 17.5 21.8 28.8 36.2
SPECfp 33.7 68.8 88.7 112.3
LINPACK DP 6.5 11.7 14.8 18.6
MEMORY
Standard (MB) 16 16 16 32
Maximum (MB) 64 128 128 128
INTERNAL FILES
Standard (MB) 0 400 160 160
Maximum (GB) 0.4 0.8 0.8 0.8
Maximum with
expansion (GB) 4.4 8.8 8.8 8.8
Memory slots 8 2 2 2
Adapter slots avail. 2 3 4 4
(1) values shown here are the results of development-level systems. While these values should be indicative of generally-available systems no warranties or guarantees are stated or implied by IBM. IBM recommends application-oriented testing for performance predications and offers the above commonly reported benchmarks only as an initial indicator.
SPECmark: Geometric mean of the ten SPECmark tests. AIX XL FORTRAN Version 2.2 and AIX XL C Version 1.2 compiler were used for these tests.
INTEGER SPECmark: Geometric mean of gcc, espresso, li and eqntott SPEC Ratios. These four tests are written in C language.
FLOAT PT SPECmark: geometric mean of spice2g6, doduc, nasa7, matrix300, fpppp and tomcatv SPEC Ratios. These six tests are written in Fortran.
SPECmark is a trademark of Standard Performance Evaulation Corp.
LINPACK DP: Double precision, n=100 results with AIX XL FORTRAN Version 2.2, with optimization. Units are megaflops.
IBM and vendor displays supported by the POWERstation/POWERserver 200 Series are listed in the Sales Manual.
The POWERstation/POWERserver 200 series also supports some of the Realtime Interface Co-Processor adapters, Multiport/2 and Portmaster(TM). These products have been announced previously for the IBM PS/2 and are now available as RPQs for the RISC System/6000 family of POWERstations and POWERservers. Software support for these adapters is provided by the IBM Realtime Interface Co-Processor AIX Support for RISC System/6000 (5696-038). Please see HONE announcements for the following:
RPQ# TITLE ------ ------------------------------------ 8A0630 Multiport/2-.5M FOR RISC System/6000 8A0631 Multiport/2-1M FOR RISC System/6000 8A0632 Portmaster(TM) Adapter/A 1MB 8A0633 Portmaster(TM) Adapter/A 2MB 8A0636 Eight-Port RS-232 Interface Board 8A0637 RS-232/RS-422 Interface Board 8A0638 Eight-Port RS-232 Interface Board 8A0639 Eight-Port RS-422 Interface Board/A 8A0640 Six-Port V.35 Interface Board/A 8A0642 Multiport Interface Cable 8A0644 Six-Port V.35 Cable 8A0645 Eight-Port Cable 8A0647 Eight-Port RS-422-A Interface Board 8A0641 Six-Port X.21 Interface Board/A 8A0646 Six-Port X.21 CableNOTES:
(TM) Trademark of International Business Machines Corporation.
MB is 1,048,576 bytes (two to the twentieth power) when referring to memory; in all other cases it is 1,000,000 (ten to the sixth power).
GB is 1,073,741,824 bytes (two to the thirtieth power) when referring to memory; in all other cases it is 1,000,000,000 (ten to the ninth power).
The following publications are shipped with the POWERstation/POWERserver 200 series. Additional copies are available at no charge to the customer.
TITLE ORDER NUMBER
----------------------------- -------------
IBM RISC System/6000 Getting Started:
Using RISC System/6000 GC23-2377
IBM RISC System/6000 Getting Started:
Managing RISC System/6000 GC23-2378
The following publications
are shipped with the POWERstation/POWERserver 220.
Additional copies are available for a fee.
TITLE ORDER NUMBER
----------------------------- -------------
IBM RISC System/6000 Quick Reference SC23-2401
IBM RISC System/6000 Common Service
Information SA23-2678
IBM RISC System/6000
POWERstation and POWERserver
Diagnostic Programs: Operator Guide SA23-2631
IBM RISC System/6000
POWERstation and POWERserver
Diagnostic Programs: Service Guide SA23-2632
IBM RISC System/6000 7011 POWERstation and
POWERserver Setup and Operator Guide SA23-2664
IBM RISC System/6000 7011 POWERstation and
POWERserver Service Guide SA23-2665
IBM RISC System/6000 Safety Information SA23-2652
IBM RISC System/6000 Problem Solving Guide SC23-2204
IBM RISC System/6000 Operator Binder Layout SA23-2673
IBM RISC System/6000 Service Binder Layout SA23-2679
IBM AIX Version 3.2 for RISC System/6000
Diskless Workstation Management Guide SC23-2433
SLSS is
available by
order number only.
Customers currently subscribing to SLSS will receive publication updates
automatically.
The following publications are available from the Software Publications Center (SPC). If translated publications are not available, U.S. English publications will be shipped instead of the national language publications. National language publications will be shipped, when available, to customers who ordered national language publications but received U.S. English. Contact your IBM representative to determine availability date.
Order
Title Number Language
------------------------------ ---------- ---------
IBM RISC System/6000 System Overview GC12-2111 German
GA82-1005 Belgian/
Dutch
GA82-1004 Belgian/
French
IBM RISC System/6000 Planning for Your GC12-2112 German
System Installation GA82-1007 Belgian/
Dutch
GA82-1006 Belgian/
French
IBM RISC System/6000 Getting Started: GC11-0848 French
Using RISC System/6000 GC12-2092 German
GC13-2398 Italian
GA15-4335 Norwegian
GC14-4078 Swedish
GB82-4005 Belgian/
Dutch
GB82-3005 Belgian/
French
IBM RISC System/6000 Getting Started: GC11-0854 French
Managing RISC System/6000 GC12-2093 German
GA15-4336 Norwegian
GC14-4079 Swedish
GC82-4007 Belgian/
Dutch
GC11-0854 Belgian/
French
IBM RISC System/6000 POWERstation and SA11-0916 French
POWERserver Diagnostic Programs: SA12-4124 German
Operator Guide SA13-1586 Italian
SA14-2862 Swedish
IBM RISC System/6000 7011 POWERstation and SA11-1076 French
POWERserver Setup and Operator Guide SA12-4315 German
SA13-1660 Italian
SA15-4339 Norwegian
SA14-2865 Swedish
IBM RISC System/6000 Problem Solving Guide SC11-0783 French
SC12-2076 German
IBM RISC System/6000 Quick Reference SC11-0875 French
SC12-2118 German
SB82-4010 Belgian/
Dutch
IBM AIX Version 3.2 for RISC System/6000 SC11-0897 French
Diskless Workstation Management Guide SC12-2127 German
CD-ROM Hypertext Information Base Library SC11-0810 French
for IBM RISC System/6000
IBM RISC System/6000 System Overview GC23-2406 English IBM RISC System/6000 Planning for Your System Installation GC23-2407 English IBM RISC System/6000 Getting Started: Using RISC System/6000 GC23-2377 English IBM RISC System/6000 Getting Started: Managing RISC System/6000 GC23-2378 English IBM RISC System/6000 Quick Reference SC23-2401 English IBM RISC System/6000 Common Service Information SA23-2678 English IBM RISC System/6000 POWERstation and POWERserver Diagnostic Programs: Operator Guide SA23-2631 English IBM RISC System/6000 POWERstation and POWERserver Diagnostic Programs: Service Guide SA23-2632 English IBM RISC System/6000 7011 POWERstation and POWERserver Setup and Operator Guide SA23-2664 English IBM RISC System/6000 7011 POWERstation and POWERserver Service Guide SA23-2665 English IBM RISC System/6000 Safety Information SA23-2652 English IBM RISC System/6000 Problem Solving Guide SC23-2204 English IBM RISC System/6000 POWERstation and POWERserver Hardware Technical Reference General Information SA23-2643 English IBM RISC System/6000 7011 POWERstation and POWERserver Hardware Technical Reference SA23-2666 English IBM RISC System/6000 POWERstation and POWERserver Hardware Technical Reference Options and Devices SA23-2646 English CD-ROM Hypertext Information Base Library for IBM RISC System/6000 SC23-2163 English
Height 84mm (3.3 inches)
Depth 419mm (16.5 inches)
Width 406mm (16.0 inches)
Weight 9 - 11.5kg (20-25 lbs)
Voltage 110-220 volts AC 50/60HZ, 100V to 125V,
200V to 240V Nominal Auto Ranging
Power Supply Rated output 110 watts
Thermal Output 340 BTUs per hour
(typical configuration)
570 BTUs per hour
(maximum configuration)
Power Source Loading 0.17kVA (typical configuration)
0.25kVA (maximum configuration)
Noise Rating
5.2 Bel sound Power
(operating - upper limit, typical configuration)
5.0 Bel sound Power
(idle - upper limit, typical configuration)
39dbA sound pressure - operating
(mean one-meter position)
38dbA sound pressure - idle
(mean one-meter position)
USA FCC Class A
IBM intends to seek FCC Class B certification for the
POWERstation/POWERserver 200 Series
Germany VDE Class A
IBM intends to seek VDE Class B certification for the
POWERstation/POWERserver 200 Series
Japan VCCI-1
IBM intends to seek VCCI-2 certification for the
POWERstation/POWERserver 200 Series
The requirements for operating the POWERstation/POWERserver 200 series are:
An external media unit is recommended to support software distribution in standalone environments.
AIX/6000 3.2, at the level, including any updates, that is current at the time the POWERstation/POWERstation 200 series is available, is required for operating the POWERstation/POWERserver 200 series.
Small disk configurations above 120MB may be dependant on a LAN connection, based on the fixed-disk storage requirements of the specific software selected. Refer to 'Software Offerings' in the publication, IBM RISC System/6000 System Overview, (GC23-2406) for assistance on planning fixed-disk storage requirements.
No additional cables required with the base machine.
NOTE:
Customers wishing to attach existing external SCSI devices will need to order the Integrated SCSI External device cable (Feature code 2833) as the SCSI connector is different from that on existing RISC System/6000 models.
Security and auditability features of the POWERstation/POWERserver 200 series are:
User management is responsible for evaluation, selection and implementation of security features, administrative procedures and appropriate controls in application systems and communications facilities.
Consult your IBM Marketing Representative.
This product is available from IBM under the Terms & Conditions for Purchase.
VOLUME DISCOUNT OFFERING
The IBM RISC System/6000 models 220, 22W, and 22G are added to Volume Exhibit 10, ADWK-01, Category A, in a new Discount group 2, for existing commitments in effect prior to 21 January 1992.
For new commitments customers should contact there IBM representative.
DISCOUNT SCHEDULE AND AVAILABLE CONTRACT PERIOD DURATIONS:
Minimum Quantity of
Eligible Machines |--Discount Percent--|
by Category
|--------------------| |--Categories---|
Duration (Months)
12 18 24 A A
DG.1 DG.2
--- ---- ----- --- ---
10 15 20 10% -
15 22 30 11% -
20 30 40 12% -
30 45 60 15% 10%
50 75 100 24% 16%
100 150 200 26% 20%
150 225 300 26% 24%
The 7011 product is added to the ADWKED (education) exhibit.
Below is the new discount grid for ADWKED category A.
(Minimum Quantity of Eligible
Machines by Category)
CONTRACT PERIOD DISCOUNT PERCENT
MONTHS CATEGORY A
12 18 24 DG1 DG2
--- --- --- --- ---
1 1 1 10% 10%
10 15 20 20% 10%
15 22 30 21% 10%
20 30 40 22% 10%
30 45 60 25% 20%
50 75 100 34% 26%
100 150 200 35% 30%
SOFTWARE CHARGING
For purposes of charging for processor-based software, the IBM RISC System/6000 POWERstation/POWERserver 220, 22W and 22G are added to Charge Group D5. Please refer to IBM Announcement Letter ZA92-0101 - "New Processor Group for IBM RISC System/6000 Licenced Programs" for further information.
The warranty period is: 12 Months.
IBM offers Maintenance service under either the Enterprise Service Agreement (ESA) or the System Service Agreement (SSA).
HOURLY SERVICE CLASS: 3
Educational allowance is available under the Terms and Conditions for IBM Volume Discount. This product is added to Exhibit - RISC System/6000 Volume Discount (Education) 10E, ADWKED-01, Category A.
All European, Middle Eastern and African Countries.
The data in this letter is subject to the disclaimer in Letter ZS90-0112, which is available from IBM on request.