IBM EMEA Sales Manual
© IBM Corporation 2003. Revised: January 28, 2003.
7248-132 IBM RS/6000 43P Series Model 132 | ||||||||||||||||||||||||||||||||||||
| Document Options | |||||||||||||||||||||||||||||||||||
|
|
| |||||||||||||||||||||||||||||||||||
Abstract
The RS/6000* 43P Series is an affordable priced line of full-function systems that provides a solid range of power and expansion capabilities. These systems are versatile and perform well as either workstations or entry servers. Selectable microprocessor speeds plus available packaging options enable you to purchase the system that works best for you. Built-in graphics and integrated Ethernet** further enhance configuration flexibility. The 43P Series leverages the personal computer bus technology from such common industry technologies as PCI, ISA and SCSI-2. This enables you to use many of the high-performance PCI adapters, low-priced ISA adapters, and readily available SCSI-2 devices. An entry graphics accelerator is integrated on the system board to provide outstanding entry 2D graphics. This graphics functionality is designed to meet the graphics needs of most business and commercial applications. Model Abstract 7248-132(For IBM US, No Longer Available as of July 18, 1997) The 43P Model 132 is the high-performance member of the 43P Series. It is powered by a PowerPC 604* microprocessor running at 133MHz with 512KB of synchronous L2 cache, 16MB of memory, and 1.2GB disk. Highlights
Model Highlights 7248-132
DescriptionThe 43P Series delivers the advanced technology and high performance of the PowerPC* microprocessor in a remarkable open system. Designed from the ground up to adhere to industry standards like Industry Standard Architecture (ISA), Peripheral Component Interconnect (PCI), and Small Computer System Interface (SCSI-2), the 43P Series allows you to exploit PC components that adhere to these formats. The 43P Series provides you with an open, powerful system for solving today's business problems and is positioned to solve the complex problems of tomorrow. Graphics Features Overview The 7248 RS/6000 43P Series has various graphics options to fit a wide range of graphics requirements.
To achieve higher levels of 2D graphics performance, you can select from the PCI-based S15, POWER GXT150P, POWER GXT250P, or POWER GXT255P (requires AIX Version 4.2) graphics accelerators. For production-quality 3D graphics at an entry price, AIX on the 43P Series provides Softgraphics 3D support for the OpenGL and graPHIGS* 3D application programming interfaces. Combining Softgraphics with a POWER GXT255P graphics accelerator enables you to run 24-bit entry-level 3D applications, such as production 3D CAD. For advanced 3D graphics functionality and high performance, you can attach the POWER GXT1000 graphics accelerator to a 43P Series workstation running AIX. This accelerator is well suited for a variety of 3D modelling and rendering applications including design automation, architectural design, animation, and entertainment graphics. The 7248 RS/6000 Model 43P (7248-132) consists of the following:
Note: Selectable Required Features are individually priced with the 1.2 GB Disk, 16MB of Parity Memory, and Keyboard included in the base price. Product PositioningThe 43P Series is positioned as the entry family of workstations and servers for the RS/6000 brand. They provide outstanding performance for their price. As a workstation, the versatile 43P Series can scale from entry 2D business graphics to complete 3D solids modeling, with the optional POWER GXT1000. It has the highest 2D performance with the POWER GXT250P and the best 24-bit "true color" support of any RS/6000 workstation. The 43P makes an excellent workgroup server. It is the lowest-cost server in the RS/6000 family. It nicely complements the other PCI/ISA workgroup servers: the E20, E30, F30 and F40. Model
Model Summary MatrixClock AIX Supported Memory Model Rate L2 Cache Version Graphics (Parity) DASD ----- ----- ------------ ------- --------- -------- ------ 132 133 512 KB Sync 4.1.3 2D 16 MB 1.2 GB MaximumCustomer Setup (CSU)These machines are Customer Setup. Devices SupportedExternal Storage Machines:
3D Input Device:
X Stations:
Dials:
Lighted Programmable Function Keyboard:
Tablets:
Plotters:
Printers:
The following non-IBM printers are also supported:
Printer notes:
Printer Peripherals:
ASCII Terminals:
Note: (1) National language support is provided through the use of Cartridge 8859/1.2 inserted in the terminal and appropriate keyboard. Modems: Modem support is provided to allow communication through common carrier telephone networks using dial-up or leased lines with asynchronous protocols or the synchronous half-duplexed SDLC protocols. Not all features supported by the listed modems are supported by the AIX Version 4 for RS/6000 software.
Model ConversionsNone. Technical Description
IBM 7248 RS/6000 43P Series Base Machine:
7248 43P RS/6000 Series Selectable Required Components:
Additional Selectable Components:
Components and Configuration Following is a description of the components and configuration possibilities for 7248 RS/6000 43P Series Required Components: The initial order must contain the following selected from the available options. Based on the operating system selected, there may be certain recommendations and restrictions. Refer to the Operating Environment section for more detail.
Orders may not contain more components then will fit into five slots and five bays. The five slots are 3 ISA, 2PCI or ISA (Shared). Memory:
7248 RS/6000 43P Series can have memory configured up to 192 MB maximum with a minimum requirement of 16MB (parity). There are six memory SIMM connectors on the system board and memory SIMMs are required to be installed in pairs (there must be a minimum of 16 MB; two 8 MB memory SIMMs). Six memory SIMM connectors provide for an economical memory buildup for most users. If future expansion of memory is projected, the purchaser must balance cost/availability of memory SIMMs with potential/total system memory requirements (Example: Today, installing four 8 MB memory SIMMs might be less expensive than one 32 MB memory SIMM but there would only be two connectors remaining for future memory expansion, for a 96 MB maximum instead of 192 MB maximum, without replacing/discarding 8 MB memory SIMMs). Graphics Adapters The 7248 RS/6000 43P Series uses PCI-based graphics adapters and offers high performance for graphics intensive applications. The adapter choices depend upon the price/performance the user requires. IBM E15-type graphics is standard on the 7248 RS/6000 43P Series motherboard. The adapters are: The POWER GXT150P Graphics Adapter The POWER GXT150P Graphics Adapter is an 8-bit, 256 color adapter that attaches the PCI local bus interface. The POWER GXT150P is designed for 2D applications including: desktop publishing, X-window applications, 2D mechanical drafting, CASE, chemical and biological applications, and electrical CAD. When used with the AIX Softgraphics software, the POWER GXT150P provides a cost-effective 3D platform. Characteristics of the POWER GXT150P are:
POWER GXT250P and GXT255P Graphics Adapters: The GXT250P and GXT255P are single-card adapters that attach to the 32-bit PCI I/O interface of the RS/6000 Model 43P workstation. These adapters offer the highest level of 2D graphics performance available on the Model 43P systems. Additionally, these adapters support the OpenGL**, PEX, and PHIGS* APIs through optional software. The GXT250P allows the display of 256 colors simultaneously from a palette of approximately 16.7 million colors. Because the adapter supports monitor resolutions of 1027 x 768 and 1280 x 1024, customers can choose from a wide variety of monitors. Vertical refresh rates are selectable from 60Hz to 85Hz. The GXT250P adapter also supports monitors that comply with Part 3 of the ISO 9241 ergonomic standard, providing users with improved viewing and reduced flicker images over non-ISO monitors. Attributes of the POWER GXT250P are:
The GXT255P is a high-end, 2D, 24-bit (true) color adapter. It allows the display of approximately 16.7 million colors from a palette of approximately 16.7 million colors. Attributes of the POWER GXT255P are:
The POWER GXT250P and GXT255P graphics adapters provide hardware support for the following functions:
AIX Version 4.1.5 or 4.2 is required for the POWER GXT250P and GXT255P. IBM 7250 POWER GXT1000 Graphics Accelerator The IBM 7250 POWER GXT1000* Graphics Accelerator provides new levels of graphics performance and function for the RS/6000* family of workstations. The POWER GXT1000 is an external subsystem which:
IBM E15-type graphics integrated on the system motherboard: The IBM E15-type graphics is a low-cost, medium performance DRAM-based graphics solution for systems employing a PCI system bus. The E15-type graphics employs the 64-bit S3 Vision864 graphical user interface (GUI) accelerator, and the 16-bit 135 MHz S3 SDAC. It comes standard with a 2 MB frame buffer, providing for up to 1280 x 1024 resolution and integrates on the system board. It uses a standard 15-Pin D-Shell connector. Supported Monitors The E15-type graphics capability integrated on the system motherboard supports multisync monitors having at least a 64 kHz horizontal scan capability. Default display modes are structured around the factory presets for the IBM Personal Computer Company family of monitors. Monitor Cable The IBM E15-type graphics supports the 15-pin D Shell Connector and monitor cable. Supported Options There are no supported options defined for this adapter. Hardware Description The IBM E15-type graphics consists of the S3 Vision864 GUI accelerator chip, the S3 135 MHz 16-bit SDAC, 2 MB of DRAM frame buffer memory, a 14.31818 MHz crystal, and other miscellaneous components. The GUI accelerator chip provides the following functions:
The RAMDAC performs the following functions:
Display Modes and Resolutions The following resolutions and color depths can be supported by the IBM E15 Graphics:
In general, the operating system device driver, in concert with the user and application, is free to choose the resolution from the above list. Size of the attached monitor will determine optimum resolution and vertical refresh rate. Keyboard The 7248 RS/6000 43P Series will ship with a 101/102-key IBM Enhanced Keyboard. Disk Drive The 7248 RS/6000 43P Series uses SCSI-2 interfaced disk drives in varied capacities in the industry standard 3.5-inch format. The first drive occupies one of the 3.5-inch bays. Internal disk drives available are 1.2 GB, 2.1 GB, and 2.2 GB. SCSI-2 Devices SCSI devices may be attached to the integrated SCSI controller. They can be internal (maximum four) or external (maximum two) devices, for a total maximum of six on the system. SCSI-2 devices are disk drives, CD-ROM drives and tape drives. A disk drive, for example, may be located internally or externally in a SCSI-2 enclosure. The first external SCSI device requires that the following be ordered:
Each additional external SCSI device requires that the following be ordered:
Diskette Drive The 7248 RS/6000 43P Series uses the industry standard 3.5-inch diskette drive of 1.44 MB format. CD-ROM Drive The CD-ROM is a 5.25-inch, SCSI-2, Tray Loading, 680MB, 8X-Speed, CD-ROM with a data rate of 1200KB/sec. supporting CD-ROM XA format. Mouse The AIX Mouse (3-button) is supported. Microphone The 7248 RS/6000 43P Series uses a thin boom microphone that can be attached on the side of the monitor or supported on a desk stand. Monitors
The size of the screen and the actual viewable screen size for each monitor is given in the following table: Screen Actual Viewable Screen Monitor Size Size, Measured Diagonally ------- ------ ------------------------- IBM 14V Color Monitor (6324) 14.0" 13.0" IBM 15V Color Monitor (6325) 15.0" 13.7" IBM 17V Color Monitor (6327) 17.0" 15.8" IBM 21P Color Monitor (9521) 21.0" 19.1" IBM 14P Color Monitor (9524) 14.0" 13.0" IBM 15P Color Monitor (9525) 15.0" 13.7" IBM 17P Color Monitor (9527) 17.0" 15.8" IBM P50 Color Monitor 15.0" 13.6" IBM P70 Color Monitor 17.0" 15.9" IBM P200 Color Monitor 20.0" 19.1 Cables Required for Use with Displays: Refer to the following table to determine the appropriate IBM cable feature required for the 7248 RS/6000 43P series.
Physical SpecificationsIBM 7248 RS/6000 43P Series Base Machine:
All possible configurations are shown in the following chart:
Mechanical Specifications:
System Unit Carton: Single Pack Dimensions.................... 25.62 x 21.50 x 12.50 in. Single Pack Weight........................ 42 lb Quantity per Pallet....................... 6 Multipack Dimensions...................... Multipack does not apply Multipack Quantity........................ Multipack does not apply Multipacks/Pallet......................... Multipack does not apply Pallet Load Dimensions.................... 48 x 40 x 32 in. Pallet Load Weight........................ 275 lb * Estimated Safe Stacking Height............ 4 high Electrical Power Specifications 200-watt power supply; dual voltage, controlled by a switch on the unit 100-125 Vac (nominal); 50-60 Hz; 4 Amp (maximum) 200-245 Vac (nominal); 50-60 Hz; 4 Amp (maximum) Environmental Specifications Air Temperature: System on: 16 to 32C (61 to 90F) System off: 10 to 43 degrees C (50 to 109 degrees F) Acoustic Noise Emission Values: Average sound-pressure levels: At operator position: 43 dB operating, 43 dB idle At bystander position (1 meter): 40 dB operating, 40 dB idle Note: The noise emission level stated is declared (upper limit) a weighted sound power level (in bels) for a random sample of machines, typically configured and operating in idle mode (that is, powered on but no disk read/write or other I/O activity). These levels were measured in controlled acoustical environments according to procedures specified by the American National Standards Institute (ANSI) S12.10 and ISO 779, and are reported in conformance with ISO 9296. Disk Drive Specifications Formatted Capacity 1.2GB 2.1GB 2.2GB Average Media data Mb/Sec 40 50 66 Rate MB/sec 10 10 10 Average Seek Time ms 11 8.5 9.3 RPM 5400 5400 7200 Sector Interleave 1:1 1:1 1:1 Interface SCSI-2 SCSI-2 SCSI-2 Write Cache yes yes yes Actual user-accessible capacity may vary slightly based on different operating environments. CD-ROM Specifications:
7248 RS/6000 43P Series Business Audio Hardware Performance and Specifications
Line Input:
Microphone Input:
CD-DA Input (Internal):
Line Output:
Headphone Output:
System Speaker Output:
Operating Environment
Agency Approvals:
Environmental Impact Assessment: 7248 RS/6000 43P Series was developed in compliance with corporate policy letter number 139 (Environmental Affairs). Environmental Impact Assessment Number 818P. Compliance with Corporate Standard C-S 3-0527-002 (1991-06) Control of Chemicals in IBM Facilities, Requirements and Responsibilities. Homologation: Telecom Environmental Testing (Safety and EMC): The 7248 RS/6000 43P Series and applicable components meet the environmental testing requirements of the country Telecom. The testing and approval process is ongoing. Environmental Test
Country Safety EMC
------- ------ ---
Canada CSA
Chile Telecom
Denmark DEMKO
Finland EIF
France LCIE LCIE
Hong Kong Telecom
Ireland Telecom
Italy Telecom
Japan Telecom
Korea Telecom
Malaysia SIRIM
Mexico Telecom
Netherlands Telecom
New Zealand Telecom Telecom
Norway NEMKO
Spain Ministry of
Industry
Sweden SEMKO
Switzerland SEV
U.K. BABT
ISO 9000: ISO 9000 Registered IBM Locations:
Research Triangle Park, North Carolina, USA
Manufacturing ISO 9001
Compliance to the International Organization for Standardization (ISO) Standard 9241 Part 3 for front-of-screen ergonomics is provided when the following monitors form a part of an ISO-compliant system: Maximum Viewable
Screen Size,
Measured
Description Diagonally
----------- ----------
IBM 17S/S Sight and Sound Monitor 15.9"
IBM 15V Color Monitor 13.7"
IBM 17V Color Monitor 15.8"
IBM 21P Color Monitor 19.1"
IBM 15P Color Monitor 13.7"
IBM 17P Color Monitor 15.8"
IBM P50 Color Monitor 13.6"
IBM P70 Color Monitor 15.9"
IBM P200 Color Monitor 19.1"
Limitations
Ports:
Diagnostics:
Data Protection and Reliability:
SCSI-2 Fast/Wide PCI-Bus Adapter (FC 2408, 6208, 2409, and 6209) Cabling Restrictions:
Hardware RequirementsA system unit order must contain, as a minimum, 7 order items:
A monitor order must contain 3 order items:
A separate software order on ISMS is not required to obtain the Licensed software products that are part of the System configurations. License material will be included in the software package shipped with the hardware. Only POWER GXT1000 Graphics Accelerators ordered after October 10, 1995 are supported by the RS/6000 43P workstation. Additionally, customers who have a RS/6000 43P workstation ordered prior to 10/10/95 and are acquiring a new POWER GXT1000 Graphics Accelerator (ordered after 10/10/95) and ordering the new 7250 GXT1000 PCI Attachment Adapter need to update the system licensed internal code and System Management Services (SMS) diskette to Version 1.07 (or subsequent version), using the update materials and information shipped with the 7250 GXT1000 PCI Attachment Adapter. Software RequirementsThe following operating systems are available:
Note: AIX Version 4.1.3 or later is required unless the 7250 POWER GXT1000 accelerator is to be installed, in which case AIX Version 4.1.4 or later (5765-3993) and one or both of the following must be installed on the RS/6000 43P Series system unit:
Cable Orders: Cables are not required for the 43P. Following is cable information for these supported products: IBM 7131 Model 105 SCSI Multi-Storage Tower Refer to the Hardware Requirements section for cable information for monitors and graphics adapters. PublicationsThe following publications are shipped with the product. Title Part Number --------------------------- ----------- System Library 30H2377 System Management Services Diskettes (2) 30H2090 Hardware Maintenance Manual 30H2409 Features -- Specify/Special/Exchange
No Charge Specify CodesA maximum select of one feature code per Disk, Memory, and keyboard group is allowed. These items will be factory installed. (#9081) 16 MB Base Memory Select (two 8MB Parity Memory SIMMs) Language Group SpecifyLanguage Groups consist of user documentation in the languages listed below: Line Cord SpecifyAdditional FeaturesAfter configuring the required features, the customer may select additional Build-To-Order features based on customer needs from the following list. Internal features will be installed in the system prior to shipment from the factory. The following features are also available for aftermarket orders by specifying feature code 0001 "After Market Order Indicator" on the order. You may not mix aftermarket and installed feature selections on the same order. Features ordered on the same order as a feature code 0001 (Aftermarket Order Specify) will not be installed in the system unit. Selectable Required FeaturesA maximum select of one feature code for Disk, Memory, Country Packs, Language Packs, and keyboards is allowed from this group. These items will be factory installed. (#9396) 1.2 GB Base Disk Drive (#9081) 16 MB Base Memory Select (two 8MB Parity Memory SIMMs) Note: The system requires 16 Megabytes (MB) of system memory expandable to 192 MB on the system board. A maximum of 6 memory modules can be installed, including the SIMMs ordered as part of the base system. Memory SIMMs must be installed in matched pairs. 101/102-Key Enhanced Keyboard with Attach Cable(No Longer Available as of July 18, 1997)
Country PacksCountry Packs include the power cord. (The Country Packs are no longer available as of October 25, 1996.)
Language PacksLanguage Packs consist of system and user documentation in the languages listed below:
Monitor Country PacksCountry Packs include the power cord.
Language Packs (Monitors)Language Packs consist of monitor documentation in the languages listed below:
Special Feature Codes -- ChargeableSpecial Features - Plant and/or Field Installable
Feature DescriptionsThe following is a list of feature codes in numeric order. Attributes, as defined in the following feature descriptions, state the interaction of requirements among features. Minimums and maximums are the absolute limits for a single feature without regard to interaction with other features. The maximum valid quantity for MES orders may be different than for initial orders. The maximums listed below refer to the largest quantity of these two possibilities. The order type defines if a feature is orderable only on initial orders, only on MES orders, or is available for both initial and MES orders. Specify feature 0001 must be used when ordering After Market (MES) orders in EMEA. All features with the exception of 3096, 3097, and 9396 are applicable. (#2111) - 8 Bit External SCSI-2 Cable Dual Port, plus terminator(For IBM US, No Longer Available as of December 3, 2001) This is an Dual Port 8-bit External SCSI-2 Cable with Terminator which is used in conjunction with the SCSI-2 adapter (FC #2408 or 6208) to attach an external SCSI-2 device to the system unit. This cable is approximately 1.5 meters long.
(#2112) - PCI SCSI Adapter To 2-Port, 8-Bit Differential Ext Device Cable(For IBM US, No Longer Available as of December 3, 2001)
(#2113) - 8-Bit External SCSI-2 Cable Single Port, plus terminator(For IBM US, No Longer Available as of December 3, 2001) This is an Single Port 8-bit External SCSI-2 Cable with Terminator which is used in conjunction with the SCSI-2 adapter (FC #2408 or 6208) to attach an external SCSI-2 device to the system unit. This cable is approximately 1.5 meters long.
(#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable
(#2115) - 16-Bit External SCSI-2 Cable Dual Port, Plus Terminator(For IBM US, No Longer Available as of April 26, 2002) This is a dual port 16-bit external SCSI-2 cable with terminator which is used in conjunction with the SCSI-2 adapter (FC #2408 or 6208) to attach an external SCSI-2 device to the system unit. This cable is approximately one meter long. A 0.5 Meter cable is also available (FC #2860). This cable may also be used to connect External SCSI-2 devices to each other.
(#2116) - PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device Cable(For IBM US, No Longer Available as of April 26, 2002)
(#2408) - IBM SCSI-2 Fast/Wide PCI-Bus Adapter(For IBM US, No Longer Available as of November 8, 1996) The IBM SCSI-2 Fast/Wide PCI-Bus Adapter is a single-ended SCSI adapter which can burst data to devices on the SCSI bus at 20 MB/s. The SCSI-2 FAST/WIDE PCI-Bus Adapter has both a internal and external connector which are physically connected to the same SCSI bus. The maximum number of addressable IDs enabled by the adapter is 15, but due to cabling restrictions the actual total number of supported devices attaching to the internal and external connector may be less. Characteristics:
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
(#2409) - PCI SCSI-2 Differential Fast/Wide Adapter(For IBM US, No Longer Available as of November 8, 1996) The PCI SCSI-2 Differential Fast/Wide Adapter is a differential SCSI adapter which can burst data to devices on the SCSI bus at 20MB/s. The SCSI-2 Differential Fast/Wide PCI-Bus Adapter has a single connector for attachment of external differential devices. Both 8-bit and 16-bit device attachments are supported, but intermixing 8-bit and 16-bit devices is not supported. The maximum number of addressable IDs enabled by the adapter is 15, but cabling restrictions may limit the actual total number of attaching devices. See the limitations section for details. Characteristics:
Adapter connector - A shielded 68-conductor connector consisting of two rows of 34 female contacts with adjacent contacts 1.27mm (0.05 inches) apart. Cable or mating connector - A shielded 68-conductor connector consisting of two rows of 34 female contacts with adjacent contacts 1.27mm (0.05 inches) apart. Detailed descriptions of the above can be found in the SCSI-3 Parallel Interface Standard X3t10/855D revision 15 or above. Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#2424) - 0.6M 16-bit SCSI-2 System to System CableThe 0.6m 16-bit SCSI-2 Differential System to System Cable provides for the connection between two or more RS/6000 processors that each have a SCSI-2 Differential Fast/Wide Adapter and a SCSI-2 Differential Fast/Wide Y-Cable (16-bit). This 68-pin cable is .6 meter (22.7 inches) in length.
(#2425) - 2.5M 16-bit SCSI-2 System to System CableThis cable provides for the connection between two or more RS/6000 processors that each have a SCSI-2 Differential Fast/Wide Adapter and a SCSI-2 Differential Fast/Wide Y-Cable (16-bit) installed. This 68-pin cable is 2.5 meter (8.2 feet) in length.
(#2616) - SCSI-2 Quad Speed CD-ROM Drive(For IBM US, No Longer Available as of January 21, 1997) The SCSI-2 Quad Speed CD-ROM Drive uses a SCSI-2 standard interface (8 bit SE) and is packaged in a standard 5 1/4" half-high form factor. It is fully multimedia compliant (MPC-2) and supports the following functions:
(#2618) - 8X Speed Tray Loading CD-ROM(For IBM US, No Longer Available as of January 8, 1998) The 8X Speed Tray Loading CD-ROM is a SCSI-2 SE 8-bit, multi-session capable, 5.25-inch half-high CD-ROM drive. Characteristics:
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#2619) - 20X (Max) SCSI-2 CD-ROM Drive(For IBM US, No Longer Available as of December 3, 2001) The 20X (Max) SCSI-2 Internal CD-ROM Drive is a tray loading CD-ROM drive providing up to 3000KB/sec maximum media data transfer rate. It is a 5.25 inch half-high form factor, single ended, 8 bit, multi-session capable, CD-ROM drive which provides state of the art performance and supports existing 600MB CD-ROM discs. Characteristics:
(#2638) - Ultimedia Video Capture Adapter - PCI(For IBM US, No Longer Available as of August 15, 2000) The Ultimedia Video Capture Adapter is a PCI-based adapter that allows the capture of live video and still images. This adapter, coupled with Ultimedia Services and the appropriate optional hardware, can be used for entry-level video conferencing, image capture, and video monitoring.
(#2647) - Video Capture Enhancement - ISA(For IBM US, No Longer Available as of July 18, 1997) The IBM Video Capture Enhancement is a cost effective attachment to the S15 graphics adapter providing full color video input. It attaches to the S15 via an internal ribbon cable. One ISA bus slot is required for the Video Capture Enhancement from which it derives its power and physical support only. The combination of the S15 graphics adapter and the Video Capture Enhancement provides the ability to capture and linearly scale the incoming video image from an NTSC, PAL, or SECAM format source and monitor the video in a user defined window. Incoming video sources may be either composite or S-video, which allows attachment of video cameras, VCRs, camcorders, laser disk players and similar standard video devices, including television tuners.
(#2648) - POWER GXT150P Graphics Adapter - PCI(For IBM US, No Longer Available as of January 8, 1998) The IBM POWER GXT150P Graphics Adapter is an 8-bit, 256-color adapter that attaches the PCI local bus interface. It is designed for 2D applications including: desktop publishing, X-window applications, 2D mechanical drafting, CASE, chemical and biological applications, and electrical CAD. When used with the AIX Softgraphics software, the POWER GXT150P provides a cost-effective 3D platform. Characteristics of the POWER GXT150P are:
(#2657) - S15 Graphics Adapter - PCI(For IBM US, No Longer Available as of January 21, 1997) The IBM S15 Graphics Adapter is a high performance VRAM-based PCI graphics adapter with integrated video coprocessor for use as a premium graphics solution. The S15 comes in a 2MB fixed version. Supported Monitors: The S15 supports multisync monitors having at least a 64 kHz horizontal scan capability. Default display modes are structured around the factory presets for the IBM Personal Computer Company family of monitors. Note: The IBM S15 Graphics Adapter does not provide a mechanism for reading the monitor ID, since most of the supported monitors return the "8514 Monitor ID" ('1010'). The S15 does not support the 8514 because it is not a multisync monitor. Monitor Cable: The S15 supports the standard 15-pin D-shell (DB-15) monitor cable.
(#2701) - 4-Port Multiprotocol Communications Controller, ISA bus(For IBM US, No Longer Available as of December 31, 1999) This adapter supports attachment of RS/6000 systems to wide area networks at speeds up to 64 kbps. The ISA-bus based adapter contains 4 ports supporting EIA232, EIA422A, V.35, or X.21 physical interfaces. These physical interfaces are accomplished using the IBM 4-Port Multiprotocol Interface Cable (FC 2705 - refer to the RS/6000 System Overview for detail on port and physical interface configurations supported). This adapter consists of a base card and a daughter card. The two cards are physically connected and require a single ISA bus card slot. The product supports SDLC connections to synchronous data networks at speeds up to 64 kbps per port. Characteristics:
This feature requires use of the IBM 4-Port Multiprotocol Interface Cable (FC 2705). This cable (actually a breakout box) supports EIA232 on Ports 0-3, EIA422A on Ports 0 and 2, V.35 on ports 0 and 1, or X.21 on Port 0. Additionally, cables are required to connect modems to the breakout box and can be ordered as: FC 2706 (EIA232), FC 2703 (V.35 France), FC 2704 (X.21) or FC 2702 (V.35).
(#2702) - Multiprotocol Attachment Cable - V.35(For IBM US, No Longer Available as of December 1, 2000)
(#2703) - Multiprotocol Attachment Cable - V.35 (France only)(No Longer Available as of December 1, 2000)
(#2704) - Multiprotocol Attachment Cable - X.21(For IBM US, No Longer Available as of December 1, 2000)
(#2705) - 4-Port Multiprotocol Interface Cable(For IBM US, No Longer Available as of December 1, 2000) The 4-Port Multiprotocol Interface cable is actually a breakout box 3 meters (9.8 ft.) which provides selectable physical interfaces for the 4-Port Multiprotocol Communications Controller. Users can select from : EIA232 (ports 0-3), EIA422A (ports 0 and 2), V.35 (ports 0 and 1), or X.21 (port 0). It supports the following attachment cables: 2702, 2703 (France), 2704, and 2706 to the desired network.
(#2706) - Multiprotocol Attachment Cable - EIA-232/V.24(For IBM US, No Longer Available as of December 1, 2000)
(#2741) - SysKonnect SK-NET FDDI-LP SAS PCI for PowerPC Systems(For IBM US, No Longer Available as of May 18, 2003)
This adapter provides single attachment to a FDDI concentrator (or point-to-point) using fiber optic cabling (not supplied with the adapter). It also offers high speed, low latency, and low CPU and bus utilization and occupies a single PCI bus slot. Features:
Connection requirements:
Note: This adapter is supported on all PCI-capable RS/6000 systems but does not support remote boot over the FDDI network at this time. Note: AIX Device Driver diskette is shipped with the adapter. Limitation: A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system. Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. Note: A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system. (#2742) - SysKonnect SK-NET FDDI-LP DAS PCI for PowerPC Systems(For IBM US, No Longer Available as of May 18, 2003)
This adapter provides either dual attachment to the main ring path or dual homing to one or two FDDI concentrators using fiber optic cabling (not supplied with the adapter). It also offers high speed, low latency, and low CPU and bus utilization and occupies a single PCI bus slot. Features:
Connection requirements:
Note: This adapter is supported on all PCI-capable RS/6000 systems but does not support remote boot over the FDDI network at this time. Note: AIX Device Driver diskette is shipped with the adapter. Limitation: A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system. Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. Note: A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system. (#2743) - SysKonnect SK-NET FDDI-UP SAS PCI for PowerPC Systems(For IBM US, No Longer Available as of July 31, 2001)
This adapter provides single attachment to a FDDI concentrator (or point-to-point) using Category-5 unshielded twisted pair (UTP) cabling (not supplied with the adapter). Note: This adapter is supported on all PCI-capable RS/6000 systems but does not support remote boot over the FDDI network at this time. Note: AIX Device Driver diskette is shipped with the adapter. It also offers high speed, low latency, and low CPU and bus utilization and occupies a single PCI bus slot. Features:
Connection requirements:
Limitation: A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system. Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. Note: A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system. (#2851) - IBM POWER GXT250P Graphics Adapter(For IBM US, No Longer Available as of December 13, 1999) The GXT250P and GXT255P provide leadership 2D graphics for the RS/6000 43P series. Coupled with IBM's implementation of the OpenGL, PEX and PHIGS 3D APIs, they provide support for a wide variety of popular 3D applications. The GXT250P graphics adapter is a single card adapter that attaches to the RS/6000 43P workstation via a single PCI graphics slot. The GXT250P allows the display of 256 simultaneous colors from a palette of approximately 16.7 million colors. It supports monitor resolutions of 1024 x 768 and 1280 x 1024. Vertical refresh rates are selectable from 60Hz to 85Hz. The GXT250P supports monitors that comply with Part 3 of the ISO 9241 ergonomic standard, providing users with improved viewing and reduced flicker images over non-ISO monitors. AIX Version 4.2 is required.
(#2852) - IBM POWER GXT255P Graphics Adapter(For IBM US, No Longer Available as of September 8, 1999) The GXT250P and GXT255P provide leadership 2D graphics for the RS/6000 43P series. Coupled with IBM's implementation of the OpenGL, PEX and PHIGS 3D APIs, they provide support for a wide variety of popular 3D applications. The GXT255P graphics adapter is the high-end 24-bit true color adapter. It is a single card adapter that attaches to the RS/6000 43P workstation via a single PCI graphics slot. The GXT255P allows the display of 16.7 simultaneous colors from a palette of approximately 16.7 million colors. It supports monitor resolutions of 1024 x 768 and 1280 x 1024 and 8-bit double buffer up to 1280 x 1024 resolution, with 8-bit overlay support and 3 hardware color maps. Vertical refresh rates are selectable from 60Hz to 85Hz. The GXT255P supports monitors that comply with Part 3 of the ISO 9241 ergonomic standard, providing users with improved viewing and reduced flicker images over non-ISO monitors. AIX Version 4.2 is required.
(#2856) - IBM 7250 POWER GXT1000 PCI Attachment AdapterThe 7250 POWER GXT1000 PCI Attachment Adapter is a factory-installed or field-installed PCI adapter card that must be installed in the supported RS/6000 workstation in order to attach the POWER GXT1000 unit. The IBM 7250 POWER GXT1000 Graphics Accelerator (Model 001 or 002) is an external subsystem that provides new levels of graphics performance and function for the RS/6000* family of workstations. It offers hardware-accelerated implementations of OpenGL**, PEX, PHIGS, X Window System**, and also support IBM GL3.2. This accelerator is well suited for a variety of three dimensional (3D) modeling and rendering applications including design automation, architectural design, geophysical analysis, molecular modeling, scientific visualization, and animation. The POWER GXT1000 is available in two models which provide similar advanced function support at two price/performance points. Both models support the same APIs. Model 002 has additional graphics processor nodes, a higher performance rasterizer, and a frame buffer expansion feature that allows support of larger texture maps and higher performance of advanced functions. Both models support a Video Output Option and stereo viewing capability.
(#2860) - 16-Bit SCSI Option to Option Cable (0.5 Meter)(For IBM US, No Longer Available as of March 19, 1999) 16-Bit SCSI Option to Option Cable is used to attach external SCSI boxes (0.5 meters long -- see #2115 for 1 meter cable)
(#2931) - 8-Port Asynchronous Adapter - EIA-232, ISA Bus(For IBM US, No Longer Available as of September 25, 1998) With this adapter, up to eight EIA-232-E asynchronous serial devices (terminals, modems, printers, etc.) may be attached. This feature contains both the adapter and 8-port DB25 connector box providing up to eight asynchronous ports from a single I/O card slot. The feature is designed to comply with requirements for EIA-232-E and the CCITT Recommendations V.24/V.28 Series 100 (start-stop). Characteristics:
(#2932) - 8-Port Asynchronous Adapter EIA232/422A, ISA Bus(For IBM US, No Longer Available as of September 25, 1998) With this adapter, up to eight EIA-232-E or RS422A compatible asynchronous serial devices (terminals, modems, printers, etc.) may be attached. This feature contains both the adapter and 8-port DB25 connector box providing up to eight asynchronous ports from a single I/O card slot. The feature is designed to comply with requirements for EIA-232 or 422A and the CCITT Recommendations V.24/V.28 Series 100 (start-stop). Characteristics:
(#2933) - 128 Port Asynchronous Controller, ISA Bus(For IBM US, No Longer Available as of September 25, 1998) The 128-Port Async Adapter subsystem provides attachment for a high concentration of asynchronous lines (up to 128) from a single ISA bus slot. Two synchronous channels link the adapter to a maximum of eight 16-Port Remote Async Nodes (RAN), up to four RANs can be linked to each synchronous channel. The RAN provides 16-EIA232 ports yielding a total of 128-ports supporting EIA232 devices in a maximum configuration. The RANs are FC 8130, FC 8134 or 8136 (rack mountable). Power supplies are included in each RAN order. One 4.5-meter (15-foot) cable (FC 8131 or customer-supplied cables) is available to connect the adapter to the first Remote Async Node on each synchronous channel. Additional Remote Async Nodes may be connected to each synchronous channel in a "daisy chain" configuration, using either the 4.5-meter (15-foot) cable (FC 8131) or the 23-cm. (9-inch) cable (FC 8132), the shorter cable being recommended when stacking Remote Async Nodes. Customer-supplied cables may also be substituted. The RJ-45 to DB-25 Converter Cable (FC 8133--quantity four per order) can be used to attach devices having a DB-25 connector to the Remote Async Nodes. One RJ-45 wrap plug and two Controller Line Terminator plugs are included with each adapter order. Note: Refer to the RS/6000 Asynchronous Communications Products Marketing Guide for additional information and guidelines. Characteristics:
(#2934) - Asynchronous Terminal/Printer Cable EIA-232The Asynchronous Printer/Terminal Cable is used for attaching printers, plotters, and terminals that support the EIA-232 standard to any asynchronous adapter. This cable is the equivalent of the combination of FC 2936 (modem cable) and FC 2937 (printer/terminal interposer) and replaces this method of printer/terminal attachment. This cable is 3m (9.8 feet) long, uses DB25 connectors and is supported on all RS/6000 systems using any asynchronous ports. It is used in conjunction with:
(#2936) - Asynchronous Cable EIA-232/V.24The Asynchronous Cable EIA-232/V.34 is used for attaching modems that support the EIA-232 standard to any asynchronous adapter. This cable is 3m (9.8 feet) long, uses DB25 connectors and is supported on all RS/6000 systems using any asynchronous ports. It is used in conjunction with:
(#2945) - Asynchronous Terminal Cable - EIA-422A(For IBM US, No Longer Available as of July 31, 2001) Provides a 20 meter (66 feet) interface cable for attaching an EIA-422A Terminal to the 8-Port and 16-Port Cable Assembly.
(#2961) - X.25 Interface Co-Processor, ISA Bus(For IBM US, No Longer Available as of October 20, 1999) The X.25 Interface Co-Processor, ISA bus provides for the attachment of the RS/6000 to synchronous data networks at speeds up to 64 kbps. The adapter provides a single port that will accommodate one of three selectable interfaces: EIA-232D/V.24, V.35, or X.21. The interface is "selected" by the cable which is separately orderable in 3m or 6m lengths. This adapter together with IBM AIXLINK/X.25 provides a single port connection to X.25 packet switched networks. Code resident on the adapter off-loads low level X.25 communications tasks from the system processor. IBM AIXLINK/X.25 is a separately orderable LPP. Characteristics:
Separate cables of 3 meter (9.8 feet) or 6 meter (19.6 feet) are available for the adapter (two lengths for each interface). A wrap plug is included with each. Note: The DIP switches on the adapter must be set correctly to ensure proper operation. Switch 10 should be OFF (for 16-bit interface). Also, check the guide to operations for setting the interrupt level.
(#2965) - X.25 Attachment Cable X.21 - 3-Meter (10 FT.)(For IBM US, No Longer Available as of January 8, 1998) See X.25 Interface Co-Processor (Feature number 2961)
(#2966) - X.25 Attachment Cable V.24 - 3-Meter (10 FT.)(For IBM US, No Longer Available as of January 8, 1998) See X.25 Interface Co-Processor (Feature number 2961)
(#2967) - X.25 Attachment Cable V.35 - 3-Meter (10 FT.)(For IBM US, No Longer Available as of January 8, 1998) See X.25 Interface Co-Processor (Feature number 2961)
(#2971) - 4/16MB Token-Ring Adapter, ISA (Short)(For IBM US, No Longer Available as of January 8, 1998) This Token Ring Adapter is designed to allow RS/6000 systems to attach to a 4 MBps or 16 MBps Token-Ring local area networks. This Token-Ring adapter is cable and network compatible with all IBM and PS/2 Token-Ring adapters; no new cables or network components are required. The adapter has one connector, RJ-45. The RJ-45 connector is used to attach to UTP cabling. A 290mm (11.4 inch) conversion cable is included with the adapter to attach to customer supplied STP cabling.
(#2976) - X.25 Attachment Cable X.21 - 6-Meter (20 FT.)(For IBM US, No Longer Available as of December 1, 2000) See X.25 Interface Co-Processor (Feature number 2961)
(#2977) - X.25 Attachment Cable V.24 - 6-Meter (20 FT.)(For IBM US, No Longer Available as of December 3, 2001) See X.25 Interface Co-Processor (Feature number 2961)
(#2978) - X.25 Attachment Cable V.35 - 6-Meter (20 FT.)(For IBM US, No Longer Available as of December 1, 2000) See X.25 Interface Co-Processor (Feature number 2961)
(#2979) - PCI Auto LANstreamer Token Ring Adapter(For IBM US, No Longer Available as of December 1, 2000) The Auto LANstreamer Token Ring PCI adapter is designed to allow a RS/6000 system to attach to 4 Mbps or 16 Mbps Token-Ring local area networks. This adapter automatically selects the correct Token-Ring speed (4 or 16 Mbps). It is cable and network compatible with all IBM PS/2 Token-Ring adapters; no new cables or network components are required. The adapter has one connector, RJ-45. The RJ-45 connector is used to attach to UTP cabling. A 10-inch conversion cable is included with the adapter to attach to STP cabling. Characteristics:
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#2981) - Ethernet Adapter, ISA (Short)(For IBM US, No Longer Available as of January 8, 1998) The IBM LAN adapter for Ethernet offers and ISA bus solution for connectivity to 10BaseT, 10Base2, and 10Base5 Ethernet. The adapter offers support for Remote program load.
(#2985) - PCI Ethernet BNC/RJ-45 Adapter(For IBM US, No Longer Available as of September 6, 2002) This feature provides 10 Mbps Ethernet connectivity. It adheres to the Peripheral Component Interconnect (PCI) Revision 2.0 and IEEE 802.3 standards. It features a low-cost, high performance 32-bit card, 33MHz bus speed, yielding a PCI bus transfer rate of 132 MB/s. It includes three LEDs to provide status of the card's operation and includes auto- sense of the media connection. The controller chip on the card contains integrated DMA buffer management for low CPU and bus utilization and look-ahead packet processing which allows protocol analysis to begin before the end of the frame is received. This card differs from feature 2987 because of the BNC/RJ-45 connector. Characteristics:
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#2987) - PCI Ethernet AUI/RJ-45 Adapter(For IBM US, No Longer Available as of July 17, 2001) This feature provides 10 Mbps Ethernet connectivity. It adheres to the Peripheral Component Interconnect (PCI) Revision 2.0 and IEEE 802.3 standards. It features a low-cost, high performance 32-bit card, 33MHz bus speed, yielding a PCI bus transfer rate of 132 MB/s. It includes three LEDs to provide status of the card's operation and includes auto- sense of the media connection. The controller chip on the card contains integrated DMA buffer management for low CPU and bus utilization and look-ahead packet processing which allows protocol analysis to begin before the end of the frame is received. This card differs from feature 2985 because of the AUI/RJ-45 connector. Characteristics:
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#2998) - TURBOWAYS 25 ATM PCI Adapter(For IBM US, No Longer Available as of October 17, 2001) For direct access to ATM networks, the TURBOWAYS 25 ATM PCI Adapter provides dedicated 25Mbps full-duplex connection using PVCs or SVCs and enables TCP/IP to run over an ATM network. The adapter also supports communication with devices located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN. Note: AIX drivers are shipped on diskette with the hardware feature. Systems ordered with AIX preinstalled will have the device drivers installed on the hard disk drive. TURBOWAYS 25 ATM PCI Adapter is compatible with:
Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.)
(#3031) - 2.2 GB SCSI-2 Disk Drive(For IBM US, No Longer Available as of September 25, 1998) The 2.2 GB SCSI-2 Disk Drive is a 3.5-inch form-factor disk drive that attaches via an ANSI-SCSI-2 interface. This compact drive provides additional price performance and growth options for the 7248 RS/6000 43P Series.
(#3096) - 2.1 GB Hard Disk Upgrade from 1.2 GB(For IBM US, No Longer Available as of July 18, 1997) This feature replaces the 1.2GB Base Hard Disk (#9396) with the 2.1 GB SCSI-2 Hard Disk Drive on the initial machine order only. See feature #3097 for a description of the 2.1 GB SCSI-2 Hard Disk Drive.
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#3097) - 2.1 GB SCSI-2 Hard Disk Drive(For IBM US, No Longer Available as of September 25, 1998) The 2.1 GB SCSI-2 Hard Disk Drive is a 3.5-inch form-factor disk drive that attaches via an ANSI-SCSI-2 interface. This compact drive provides additional price performance and growth options for the RS/6000 43P Series. The 2.1 GB file is a 5400 RPM (Revolutions Per Minute) driver versus the 2.2 GB (Feature Code #3031) file which is a 2.2 GB high performance drive.
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#3099) - 2.2GB Hard Disk Upgrade from 1.2 GB(For IBM US, No Longer Available as of July 18, 1997) This feature replaces the 1.2GB Base Hard Disk (#9396) with the 2.2 GB SCSI-2 Hard Disk Drive on the initial machine order only. See feature #3031 for a description of the 2.2GB SCSI-2 Hard Disk Drive.
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#3607) - POWERdisplay 17(For IBM US, No Longer Available as of October 6, 1995) The POWERdisplay 17 is a high resolution graphics raster scan color display featuring a Trinitron** CRT with a maximum viewable image size of 16.1 inches/409mm measured diagonally. The POWERdisplay 17 is intended for high resolution graphic applications and supports an Analog RGB and separate horizontal and vertical sync. The POWERdisplay provides sharp, bright, realistic colors with minimum distortion. The anti-reflective CRT surface treatment virtually eliminates screen reflections while optimizing image quality. The POWERdisplay 17 meets ISO 9241 Part 3 recommendations for Video Display Terminal (VDT) ergonomics and also meets Very Low Frequency Magnetic Field (VLMF), Extremely Low Frequency Magnetic Field (ELMF), Very Low Electrical Field (VLEF), and Extremely Low Electrical Field (ELEF) emission standards and virtually eliminates static discharge from the front of the screen. Operator controls for power, brightness, contrast, image tilt, horizontal and vertical static convergence, geometry, vertical centering, and indicators are included in a front accessible panel. A tilt swivel base is standard. The display automatically synchronizes with various screen formats. Voltage/Power Cord: No specify code is required to order the default six foot Power Cord option. High voltage (200-240V 50Hz) and the appropriate power cord is automatically supplied based on the 3 digit country code.
(#3608) - POWERdisplay 20(For IBM US, No Longer Available as of September 12, 1995) The POWERdisplay 20 is a high-resolution multisync graphics raster scan color display intended for high-resolution graphics applications. The POWERdisplay 20 has a flexible analog Red/Green/Blue (RGB) interface. The display automatically synchronizes with various screen formats. It provides sharp, bright, realistic colors for users of graphics applications that require high-resolution displays. It offers a high- contrast antiglare treatment that results in strikingly clear images. IBM POWERdisplay 20-inch monitor has an actual viewable screen size of 19.1 inches when measured diagonally. The POWERdisplay 20:
Operating Environment:
(#3612) - IBM P50 Color Monitor(For IBM US, No Longer Available as of July 18, 1997) The IBM P50 Color Monitor is a 15 inch high resolution color monitor featuring a Trinitron CRT for clear and sharp images and having a maximum viewable image of 13.6 inches/346mm measured diagonally. The anti- reflective CRT treatment on the P50 virtually eliminates reflections while optimizing image quality. The P50 is designed primarily for corporate customers, for whom picture quality, reliability and connectivity in a showcase environment is of paramount importance. The IBM P50 Color Monitor features On Screen Display to assist in the operation of user controls by providing an indication of the real-time adjustments that are being made. The IBM P50 meets ISO 9241 Part 3 recommendation for Video Terminal (VDT) ergonomics. The P50 meets both the U.S. Environmental Protection Agency (EPA) Energy Star program and the Swedish National Board for Industrial and Technical Development (NUTEK) power consumption requirements. The P50 meets the Swedish Board for Technical Accreditation (SWEDAC) and MPRII. The P50 meets Communication Federal Commission (FCC) Class B requirements. A tilt swivel base is standard with the P50 Color Monitor. The monitor automatically synchronizes with various screen formats.
(#3613) - P70 Color Monitor(For IBM US, No Longer Available as of July 21, 1998) The IBM P70 is a 17-inch high resolution multisync graphics raster scan color display featuring a Trinitron**CRT for the clearest, sharpest image with a maximum viewable image of 15.9 inches/403mm measured diagonally. The IBM P70 Color Monitor is supplied with an anti- reflective CRT film treatment that virtually eliminates reflection while optimizing image quality. The IBM P70 is intended for high resolution graphics applications where high quality and reliability are of the utmost importance. The IBM P70 Color Monitor features On Screen Display to assist in the operation of user controls by providing an indication of the real-time adjustments that are being made. The IBM P70 meets ISO 9241 Part 3 recommendations for Video terminal (VDT) ergonomics. The P70 meets both the U.S. Environmental Protection Agency (EPA) Energy Star program and the Swedish National Board for Industrial and technical Development (NUTEK) power consumption requirements. The P70 meets the Swedish Board for Technical Accreditation (SWEDAC), MPRII and TCO-92. The P70 meets the Federal Communication Commission (FCC) Class B requirements. A tilt swivel base is standard with the P70 Color Monitor. the monitor automatically synchronizes with various screen formats.
(#3614) - P200 Color Monitor(For IBM US, No Longer Available as of July 21, 1998) The IBM P200 is a 20-inch high resolution multisync graphics raster scan color display featuring a Trinitron**CRT for the clearest, sharpest image with a maximum viewable image of 19.1 inches/486mm measured diagonally. The IBM P200 Color Monitor is supplied with a seven layer anti-reflective bonded panel that virtually eliminates reflection while optimizing image quality. The IBM P200 is intended for high resolution graphics applications where high quality and reliability are of the utmost importance. The IBM P200 Color Monitor features an On Screen Display to assist in the operation of user controls by providing an indication of the real- time adjustments that are being made. the IBM P200 meets ISO 9241 Part 3 recommendations for Video Terminal (VDT) ergonomics. The P200 meets both the U.S. Environmental Protection Agency (EPA) Energy Star program and the Swedish National Board for Industrial and Technical Development (NUTEK) power consumption requirements. The P200 meets the Swedish Board for Technical Accreditation (SWEDAC), MPRII and TCO-92. The P200 meets the Federal Communication Commission (FCC) Class B requirements. A tilt swivel base is standard with the P200 Color Monitor. The monitor automatically synchronizes with various screen formats.
(#3615) - P201 Color Monitor(For IBM US, No Longer Available as of July 21, 1998) The IBM P201 Color Monitor features a 20-inch Trinitron** CRT with a viewable image size of 19.1 inches (486mm). This high-quality IBM premium monitor is designed to support a wide range of attachment platforms and display nodes, utilizing microprocessor-controlled, multifrequency operation. IBM P201 Color Monitors provide:
(#4080) - 4MB Parity Memory SIMM(For IBM US, No Longer Available as of July 18, 1997) This feature provides and additional 4 MB of memory. 4 MB Memory SIMMs must be installed in groups of two identical SIMMs for a total of 8 MB of system memory. Each additional group of two memory SIMMs fills 2 of the 6 total memory SIMM slots available.
(#4081) - 8MB Parity Memory SIMM(For IBM US, No Longer Available as of July 18, 1997) This feature provides and additional 8MB of memory. 8 MB Memory SIMMs must be installed in groups of two identical SIMMs for a total of 16 MB of system memory. Each additional group of two memory SIMMs fills 2 of the 6 total memory SIMM slots available.
(#4082) - 16MB Parity Memory SIMM(For IBM US, No Longer Available as of January 8, 1998) This feature provides and additional 16 MB of memory. 16 MB Memory SIMMs must be installed in groups of two identical SIMMs for a total of 32 MB of system memory. Each additional group of two memory SIMMs fills 2 of the 6 total memory SIMM slots available.
(#4083) - 32MB Parity Memory SIMM(For IBM US, No Longer Available as of December 1, 2000) This feature provides and additional 32 MB of memory. 32 MB Memory SIMMs must be installed in groups of two identical SIMMs for a total of 64MB of system memory. Each additional group of two memory SIMMs fills 2 of the 6 total memory SIMM slots available.
(#4213) - 13W3 to 15-Pin D-Shell Converter Cable(For IBM US, No Longer Available as of July 31, 2001) This converter cable allows a standard 15-pin display cable to be connected to a graphics adapter with a 13W3 connector. This feature is normally needed for use with displays that have an integrated (captured) cable with a 15-pin D-Shell connector (for example, 8508, 631x, 632x, 952x displays).
(#4214) - 13W3 to 3-BNC Display Cable(For IBM US, No Longer Available as of September 8, 1999) This cable provides three separate BNC connectors to allow many IBM and non-IBM displays to attach to a graphics adapter with a 13W3 connector.
(#4217) - 15-Pin D-Shell to 5 BNC Cable (ID Bits = 0100)(For IBM US, No Longer Available as of July 31, 2001) This cable allows five separate BNC connectors at the display to attach to a graphics adapter with a 15 Pin D-Shell connector.
(#4223) - Ethernet 10Base2 TransceiverThe 10Base2 Ethernet transceiver is compatible with Ethernet/IEEE 802.3 transceiver specifications and 10 MBps Ethernet CSMA/CD operation, to provide a connection to thin Ethernet coaxial cable (10Base2). It is connected to a 15-pin DIX Ethernet connection via a transceiver (AUI) cable and converts the signal to 10Base2. The medium connection is made through a BNC coaxial connector.Features include:
(#4227) - Sun Compatible Display Converter Cable(For IBM US, No Longer Available as of March 19, 1999) This cable provides a method of attaching a Sun-compatible display (1152x900) to an appropriate graphics adapter. The cable converter is 12 inches long. Since this cable is not intended to be the primary connection between the adapter and the display, the original display cable is also required. The connector on the graphics adapter end is a 13W3 plug with a 13W3 receptacle at the display end.
(#4228) - 15-Pin to 5 BNC Display Cable(For IBM US, No Longer Available as of March 19, 1999) This cable provides five separate BNC connectors to allow displays to attach to a graphics adapter with a 15-Pin D shell connector.
(#4229) - 13W3 to 5-BNC Display Cable(For IBM US, No Longer Available as of March 19, 1999) This cable provides five separate BNC connectors to allow displays to attach to a graphics adapter with a 13W3 connector.
(#4234) - 13W3 to 13W3 Display Cable(For IBM US, No Longer Available as of December 3, 2001) This cable attaches displays with a 13W3 connector to a graphics adapter with a 13W3 connector.
(#4237) - 13W3 to 15-Pin DDC/ID Bits Switchable Display Cable(For IBM US, No Longer Available as of December 3, 2001) This cable attaches displays with 13W3 video connectors to graphics adapters with 15-Pin connectors. There is a switch in the cable that is used to enable or disable Plug and Play. When disabled, ID Bits are presented to the attaching system.
(#4238) - 15-Pin D-Shell to 13W3 DDC Cable (ID bits NONE)(For IBM US, No Longer Available as of December 3, 2001) This cable allows a display with a 13W3 connector to attach to a graphics adapter with a 15-pin D-Shell connector.
(#4239) - 15-Pin to 3-BNC, ID Bit Display Cable(For IBM US, No Longer Available as of July 31, 2001) This cable attaches displays with 3-BNC video connectors to graphics adapters with 15-Pin D shell connectors.
(#4312) - 166MHz PowerPC 604e Processor UpgradeThe 166MHz PowerPC 604e Upgrade for the RS/6000 43P models 100, 120, and 132 provides a binary compatible performance boost for those customers needing additional processing power. This customer installable feature includes:
The system's existing L2 cache remains on the system and is used by the upgrade to help boost performance.
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#5014) - Windows NT Server Indicator (Factory only)(For IBM US, No Longer Available as of January 21, 1997) The Windows NT Server Indicator is required whenever an order for Windows NT Server is placed (using feature #5005 for software preinstall).
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#6152) - 4 GB 4mm Tape Drive(For IBM US, No Longer Available as of January 30, 1998) The 4.0 GB 4 mm Internal Tape Drive features up to 8.0 GB (typical) of storage capacity with compression in a 5.25 inch half bay via the SCSI interface. One Media kit is included which consists of a data cartridge, diagnostic cartridge and a cleaning cartridge.
(#6208) - PCI SCSI-2 Fast/Wide Single-Ended Adapter(For IBM US, No Longer Available as of September 8, 1999) The PCI SCSI-2 Fast/Wide Single-Ended Adapter (#6208) provides a single-ended SCSI-2 Fast/Wide interface that can burst data to devices on the SCSI bus at 20MB/s. This feature can provide both internal and external device support, connected to the same SCSI bus. Machines ordered with AIX Version 4.2.0 will require the addition of APAR Ix60857 to operate optimally. This APAR can be obtained through FixDist, or from the IBM Support Center. For information on FixDist, refer to the following URL "http://aix.boulder.ibm.com/aix.us/fixes"
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#6209) - PCI SCSI-2 Fast/Wide Differential Adapter(For IBM US, No Longer Available as of September 8, 1999) The PCI SCSI-2 Fast/Wide Differential Adapter (#6209) is a PCI adapter that provides a differential fast/wide SCSI-2 interface. It can burst data to external devices on the SCSI bus at 20MB/s. Machines ordered with AIX Version 4.2.0 will require the addition of APAR Ix60857 to operate optimally. This APAR can be obtained through FixDist, or from the IBM Support Center. For information on FixDist, refer to the following URL "http://aix.boulder.ibm.com/aix.us/fixes"
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#6308) - Personal Microphone(For IBM US, No Longer Available as of March 19, 1999) The IBM Personal Microphone is a lightweight microphone and headset which conveniently mounts over and behind the user's ear. The microphone element is attached to the earpiece with a thin tubular boom. The IBM personal Microphone allows adjustments to be made to position the microphone and headset for either the left or right ear. The IBM Personal Microphone is a perfect addition to the microphone supplied with you system unit. It will allow each user to have their own microphone. The microphone is suitable for a wide range of applications but is especially suited for speech recognition applications including dictation and navigation in an office environment. The microphone allows consistent performance by providing for an optimum distance the voice source and the microphone element and providing concurrent feedback to the user via the personal headset.
(#6509) - Mounting Kit - 3.5" Disk in 5.25" BayThe 3.5 inch Disk mounting kit provides the ability to mount a 3.5-inch disk into a 5.25 inch bay.
(#6600) - Quiet Touch Keyboard, US English, #103P
(#6601) - Quiet Touch Keyboard, French, #189
(#6602) - Quiet Touch Keyboard, Italian, #142
(#6603) - Quiet Touch Keyboard, German/Austrian, #129
(#6604) - Quiet Touch Keyboard, UK English, #166
(#6605) - Quiet Touch Keyboard, Spanish, #172
(#6606) - Quiet Touch Keyboard, Japanese, #194
(#6607) - Quiet Touch Keyboard, Brazilian Portuguese, #275(For IBM US, No Longer Available as of March 19, 1999)
(#6608) - Quiet Touch Keyboard, Canadian French, #058(For IBM US, No Longer Available as of March 19, 1999)
(#6609) - Quiet Touch Keyboard, Belgian/French, #120(For IBM US, No Longer Available as of April 26, 2002)
(#6610) - Quiet Touch Keyboard, Belgian/UK-Flemish, #120(For IBM US, No Longer Available as of April 26, 2002)
(#6611) - Quiet Touch Keyboard, Swedish/Finnish, #153(For IBM US, No Longer Available as of April 26, 2002)
(#6612) - Quiet Touch Keyboard, Danish, #159(For IBM US, No Longer Available as of April 26, 2002)
(#6613) - Quiet Touch Keyboard, Bulgarian, #442(For IBM US, No Longer Available as of March 19, 1999)
(#6614) - Quiet Touch Keyboard, Swiss,French/German, #150f/g(For IBM US, No Longer Available as of April 26, 2002)
(#6616) - Quiet Touch Keyboard, Norwegian, #155(For IBM US, No Longer Available as of April 26, 2002)
(#6617) - Quiet Touch Keyboard, Dutch, #143(For IBM US, No Longer Available as of March 19, 1999)
(#6618) - Quiet Touch Keyboard, Portuguese, #163(For IBM US, No Longer Available as of March 19, 1999)
(#6619) - Quiet Touch Keyboard, Greek, #319(For IBM US, No Longer Available as of April 26, 2002)
(#6620) - Quiet Touch Keyboard, Hebrew, #212(For IBM US, No Longer Available as of April 26, 2002)
(#6621) - Quiet Touch Keyboard, Hungarian, #208
(#6622) - Quiet Touch Keyboard, Icelandic, #197(For IBM US, No Longer Available as of March 19, 1999)
(#6623) - Quiet Touch Keyboard, Polish, #214(For IBM US, No Longer Available as of March 19, 1999)
(#6624) - Quiet Touch Keyboard, Romanian, #446(For IBM US, No Longer Available as of March 19, 1999)
(#6625) - Quiet Touch Keyboard, Slovakian, #245(For IBM US, No Longer Available as of March 19, 1999)
(#6626) - Quiet Touch Keyboard, Czech, #243(For IBM US, No Longer Available as of March 19, 1999)
(#6627) - Quiet Touch Keyboard, Turkish, #179(For IBM US, No Longer Available as of March 19, 1999)
(#6628) - Quiet Touch Keyboard, Turkish, #440(For IBM US, No Longer Available as of March 19, 1999)
(#6629) - Quiet Touch Keyboard, LA Spanish, #171
(#6630) - Quiet Touch Keyboard, Arabic, #238(For IBM US, No Longer Available as of April 26, 2002)
(#6632) - Quiet Touch Keyboard, Serbian-Cyrillic, #118(For IBM US, No Longer Available as of March 19, 1999)
(#6633) - Quiet Touch Keyboard, Korean, #413(For IBM US, No Longer Available as of April 26, 2002)
(#6634) - Quiet Touch Keyboard, Chinese/US, #467(For IBM US, No Longer Available as of April 26, 2002)
(#6635) - Quiet Touch Keyboard, French Canadian, #445(For IBM US, No Longer Available as of March 19, 1999)
(#6636) - Quiet Touch Keyboard, Thailand, #191(For IBM US, No Longer Available as of March 19, 1999)
(#6638) - Quiet Touch Keyboard, Russian, #443
(#6639) - Quiet Touch Keyboard, Croatian, #105(For IBM US, No Longer Available as of March 19, 1999)
(#6640) - Quiet Touch Keyboard, US English ISO9995, #103P(EMEA)
(#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter (15 ft.)This cable provides attachment between the 128-port Async. Controller to the first RAN in a daisy chain, or attachment between RANs in the daisy chain. See feature code 2933 (ISA) or 8128 (MCA) for further information.
(#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)This cable may be substituted for the 4.5 meter (15 foot) async controller cable whenever a customer configuration requires stacked Remote Async Nodes. See feature code 2933 (ISA) or 8128 (MCA) for further information.
(#8133) - RJ-45 to DB-25 Converter CableThis cable can be used to attach EIA-232 devices to the 16 port EIA 232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async subsystem. This cable provides a 25-pin D shell connector for device attachment. Four cables are provided per each order.
(#8134) - Remote Asynchronous Node 16-Port EIA-232This is the remote node which operates in conjunction with Feature 2933. See feature code 2933 (ISA) for further information.
(#8136) - Rack Mountable Remote Asynchronous Node 16-Port EIA-232The Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (RAN) is a modified version of the existing 16-port Remote Async Node (feature #8130 or #8134) in an industry-standard 19-inch rack mount chassis to allow simpler installation and ease-of-use. Like the existing RAN, it can also be configured as a desktop device. As an additional benefit, the new metal chassis meets FCC Class B/CISPR B when used with similarly rated RS/6000 host to meet the needs of customers with these requirements. The RANs provide 16 ports of EIA-232 capability with full modem controls on each port and are connected to the 128-port Async Controller (Micro Channel or ISA versions) residing in the host. RANs are connected in daisy-chain fashion up to 8 RANs per 128-port Async Controller (either version). The new rack-mountable RAN offers these enhanced features:
The new rack-mountable RAN offers these same features as the existing RAN product:
(#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232Provides remote connection of up to 16 EIA-232 devices to a 128-Port Asynchronous Controller. Each port can be individually programmed to provide a asynchronous connection of 230 Kbaud, but a limited number of ports in a maximum configuration (128 ports) can be supported at this baud rate.
(#8138) - Enhanced Remote Asynchronous Node 16-Port RS-422(For IBM US, No Longer Available as of July 31, 2001) Provides remote connection of up to 16 RS-422 devices to a 128-Port Asynchronous Controller. Each port can be individually programmed to provide a asynchronous connection of 230 Kbaud, but a limited number of ports in a maximum configuration (128 ports) can be supported at this baud rate.
(#8222) - External 3510 SCSI Enclosure(For IBM US, No Longer Available as of January 8, 1998) An external enclosure that accepts a 3.5 inch or 5.25 inch half-high SCSI storage device such as a SCSI disk drive and connects to the system unit via a SCSI cable attached to an 8-bit SCSI connector on the system and uses the integrated SCSI controller on the system board. The enclosure features a 32-watt universal power supply, a cover key lock assembly and mounting holes in the base assembly for added security. The enclosure adhere to the ANSI standard X3.131-1986, which supports up to seven SCSI devices. Multiple enclosures may be stacked to satisfy storage requirements for LAN or other applications that require accessibility to large amounts of data.
(#8223) - SCSI-2 External Cable (card to option)(For IBM US, No Longer Available as of January 8, 1998) External 8-bit SCSI cable used to connect the system unit to an external SCSI device such as the external 3510 SCSI enclosure (FC #8222). This cable connects to the connector for the SCSI controller integrated on the system board.
(#8224) - SCSI-2 External Cable (long - option to option)(For IBM US, No Longer Available as of January 8, 1998) This is an 8-bit external SCSI cable used to connect external SCSI options to each other. The cable is approximately 1 meter long. A shorter version is also available see feature code # 8225.
(#8225) - SCSI-2 External Cable (short - option to option)(For IBM US, No Longer Available as of January 8, 1998) This is an 8-bit external SCSI cable used to connect external SCSI options to each other. The cable is approximately 0.5 meters long. A longer version is also available see feature code # 8224.
(#8226) - SCSI Active Terminator(For IBM US, No Longer Available as of January 8, 1998) This device is used to terminate externally attached SCSI devices and is used in conjunction with the following feature codes (8223, 8224, and 8225). A terminator must be ordered with the first SCSI cable order.
(#8227) - Tie-down Strap Security DeviceThe tie-down strap is used as an aid in securing the system unit and connects the system unit via a cable to a more secure item such as a desk, wall fixture, etc.
(#8228) - 1.2 GB SCSI-2, 5400 RPM Hard Disk Drive(For IBM US, No Longer Available as of July 18, 1997) The 1.2 GB SCSI-2 Hard Disk Drive is a 3.5 inch form-factor disk drive that attaches via an ANSI-SCSI-2 interface. This compact drive provides additional price performance and growth options for the RS/6000 43P Series.
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. (#9396) - 1.2GB Base Hard Disk Drive(For IBM US, No Longer Available as of July 18, 1997) This feature specifies the 1.2GB Base Hard Disk. See feature (#8228) for a description of the 1.2GB SCSI-2 Hard Disk Drive.
Note: (2) Supported on systems with Windows NT installed prior to April 25, 1997. No longer available for Windows NT-based systems after December 31, 1997. Independent Hardware Vendor OptionsIndependent hardware vendor options are available on IBM RS/6000 43P Series machine type 7248. After configuring the required components the customer may select additional build to order components based on customer need from the following list:
These same part numbers are available for customer installation by calling IBM PC Direct. Feature ExchangesNone. Accessories
Customer Replacement Parts
Trademarks(R), (TM), * Trademark or registered trademark of International Business Machines Corporation. ** Company, product, or service name may be a trademark or service mark of others. Windows is a trademark of Microsoft Corporation. PC Direct is a trademark of ZIFF Communications Company and is used by IBM Corporation under license. | ||||||||||||||||||||||||||||||||||||
Abstract