[Top] [Prev] [Next] [Contents] [Index]
LOCALDEV Messages
LOCALDEV messages pertain to a terminal's local file system on a PCMCIA card. If you are looking for messages that refer to the LOCALDEV module but do not appear here, refer to "Messages Common to All Modules".
FLASH, n megabyte flash memory card: manufacturers id id, devcode code
- Severity:
- Information
- Explanation:
- Identifies the PCMCIA card and the amount of memory
available.
- User Action:
- None
READONLY, n megabyte read only memory card
- Severity:
- Information
- Explanation:
- Identifies the card as read-only.
- User Action:
- None
UNKNOWN, n megabyte memory card of unknown type
- Severity:
- Information
- Explanation:
- Reports that the card type is unknown to the X server, but
identifies the amount of available memory.
- User Action:
- None
UNSUPPORTED, unsupported memory card: manufacturers id id, device dev
- Severity:
- Error
- Explanation:
- The current version of the X server does not support the
memory card installed in the terminal base. The memory card is identified by
its manufacturer's identification and its device code.
- User Action:
- Replace the current memory card with one supported by the
current version of NCDware. NCD Technical Support can provide you with a
list of the supported memory cards.
WRITEERROR, error flushing data to flash card
- Severity:
- Error
- Explanation:
- A write error occurred when writing to the PCMCIA card. The
PCMCIA card may be corrupted.
- User Action:
- You may need to reformat the card and recopy the contents onto
it.
[Top] [Prev] [Next] [Contents] [Index]
Send comments, suggestions, or questions about this document to the NCD Technical Publications Department by Internet e-mail. Write to us at
techpubs@ncd.com.
Copyright © 1997, NCD Inc. All rights
reserved.