[Top] [Prev] [Next] [Contents] [Index]
PPPD Messages
PPPD messages pertain to communications using Point-to-Point Protocol (PPP) or Serial Line Interface Protocol (SLIP). If you are looking for a message that refers to the PPPD module but does not appear here, refer to "Messages Common to All Modules".
BADIOCTL, Port n: internal I/O error - message
- Severity:
- Error
- Explanation:
- The X server has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
BADLDISC, Port n: unable to start protocol line discipline
- Severity:
- Error
- Explanation:
- The X server has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
BADOPEN, Unable to open serial port n
- Severity:
- Error
- Explanation:
- The X server has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
BADREAD, Port n: read error
- Severity:
- Error
- Explanation:
- The X server has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
BADSPMGR, Error talking to Serial Port Manager - message
- Severity:
- Error
- Explanation:
- The X server has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
CNFGFAIL, Port n: config error - message
- Severity:
- Error
- Explanation:
- The X server has detected a configuration error on the specified
port as described in the message.
- User Action:
- Refer to the message for guidance in resolving the problem. If
you need additional assistance, please contact NCD Technical Support.
IPCPFAIL, Port n: IPCP config failure - message
- Severity:
- Error
- Explanation:
- The X server has encountered difficulties during
communications negotiations due to either host or terminal IPCP (Internet
Protocol Control Protocol) configuration errors.
- User Action:
- Verify that both the host and terminal are configured correctly
for IPCP communications. If you need additional assistance, refer to your PPP
product documentation or contact NCD Technical Support.
LCPFAIL, Port n: LCP config failure - message
- Severity:
- Error
- Explanation:
- The X server has encountered difficulties during
communications negotiations due to either host or terminal LCP configuration
errors.
- User Action:
- Verify that both the host and terminal are configured correctly
for LCP (Link Control Protocol) communications. If you need additional
assistance, refer to your PPP product documentation or contact NCD Technical
Support.
LOOPBACK, Port n: the line appears to be looped back
- Severity:
- Warning
- Explanation:
- The specified port is configured incorrectly for negotiations
between the host system and the terminal.
- User Action:
- Verify that both the host and terminal are configured correctly
for PPP communications. If you need additional assistance, refer to your PPP
product documentation or contact NCD Technical Support.
NOCTLSOCK, Unable to create IP control socket
- Severity:
- Error
- Explanation:
- The X server has encountered an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
NOLOCALADDR, Port n: no local IP address
- Severity:
- Error
- Explanation:
- The X server does not have an IP address assigned.
- User Action:
- Assign the X server's IP address in one of two ways:
NOMEM, Not enough memory
- Severity:
- Error
- Explanation:
- The X server does not have sufficient memory to perform the
requested action.
- User Action:
- Close any unused local clients to free memory for the desired
function.
RESTART, Port n: protocol_layer is being restarted
- Severity:
- Information
- Explanation:
- The remote host sent a termination message which closed the
connection; the X server is attempting to re-establish communications at the
specified communications protocol layer.
- User Action:
- None
TERMREQ, Port n: protocol_layer terminate-request received
- Severity:
- Information
- Explanation:
- The terminal has received a termination message from the
remote host.
- User Action:
- None
UP, Port n: local = nnn.nnn.nnn.nnn, remote = nnn.nnn.nnn.nnn
- Severity:
- Information
- Explanation:
- The X server has established communications on the specified
port using the specified IP addresses for the terminal and the remote host.
- User Action:
- None
[Top] [Prev] [Next] [Contents] [Index]
Send comments, suggestions, or questions about this document to the NCD Technical Publications Department by Internet e-mail. Write to us at
techpubs@ncd.com.
Copyright © 1997, NCD Inc. All rights
reserved.