What is the refresh rate of the GXT1000 Graphics Adapter?
The GXT1000 was designed to set the scan rate by reading the cable
ID and setting the scan rate appropriately.
If the GXT1000 is connected to a system, but it is not connected to a
monitor and booted, it will default to the 60khz rate.
To set the refresh rate of the GXT1000 to 60kHz (regardless of
cable), connect the GXT1000 to the system but not to the
monitor, power both down, power up and wait for the system to
fully come up. Next, connect the monitor. The GXT1000 will stay
at 60kHz.
[ Doc Ref: 97483550821018 Publish Date: Dec. 05, 2000 4FAX Ref: none ]