System Hangs at c33 with an LFT.


Problem

System hangs at c33 with an LFT.

Solution

c33 is configuring the console as a tty. Typcially this occurs because the console is configured as a tty but has no tty. In this situation, when booting into service mode and executing an lscons, the console will show up as an lft. To verify that this is the case, enter smitty chcons. PATHNAME of console will be set to /dev/tty0. Change the pathname to /dev/lft0 and reboot your system.


[ Doc Ref: 9723982756752     Publish Date: Oct. 24, 2000     4FAX Ref: none ]