[Top] [Prev] [Next] [Contents] [Index]
RTLD Messages
RTLD messages pertain to the dynamic loader, which is responsible for loading X server modules. If you are looking for a message that refers to the RTLD module but that does not appear here, refer to "Messages Common to All Modules".
BADEXPMOD, incorrect exports module loaded
- Severity:
- Error
- Explanation:
- The export module that was found is incorrect for the current X
server.
- User Action:
- Make sure that the X server is loading modules from the correct
directory.
DISABLED, loading for module has been disabled
- Severity:
- Warning
- Explanation:
- Module cannot be loaded because it has been disabled.
- User Action:
- Make sure that the desired module load policy has been
configured through the modules-load-policy remote configuration parameter.
ERRLOAD, error loading module
- Severity:
- Error
- Explanation:
- An error occurred while loading the module.
- User Action:
- Make sure that the host file system is accessible to the terminal.
Also make sure that you are using the correct server module versions.
ERROPEN, error opening module file for module
- Severity:
- Error
- Explanation:
- The X server cannot open the module file for module.
- User Action:
- Make sure that the modules directory is configured correctly
and accessible.
ERROR, error
- Severity:
- Error
- Explanation:
- The error described in error (for example,
CRC
error
) was
encountered by the loader.
- User Action:
- User action varies depending upon the specific error
encountered. Generally, make sure that the modules directory has been
configured correctly and is accessible.
INITFAIL, could not register free cache routine
- Severity:
- Error
- Explanation:
- The X server has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
LOADED, loaded `version'
- Severity:
- Information
- Explanation:
- The module described by the version information has been
loaded into memory.
- User Action:
- None
LOADING, loading module from file
- Severity:
- Information
- Explanation:
- The module module is being unloaded from the file file.
- User Action:
- None
NAMENULL, cannot autoload, name does not exist
- Severity:
- Error
- Explanation:
- An invalid module name was supplied.
- User Action:
- Make sure that the module name used is correct.
RETRY, module load failed, retrying from default location
- Severity:
- Information
- Explanation:
- The loader was unable to load the module and tries to load from
the default installation directory.
- User Action:
- None
UNLOAD, unloading module
- Severity:
- Information
- Explanation:
- The module is being unloaded from memory.
- User Action:
- None
UNLOADFAIL, unable to unload module module
- Severity:
- Error
- Explanation:
- The module could not be unloaded.
- User Action:
- None
[Top] [Prev] [Next] [Contents] [Index]
Send comments, suggestions, or questions about this document to the NCD Technical Publications Department by Internet e-mail. Write to us at
techpubs@ncd.com.
Copyright © 1997, NCD Inc. All rights
reserved.