[Top] [Prev] [Next] [Contents] [Index]

SNMPD Messages

SNMPD messages pertain to the SNMP daemon. If you are looking for a message that refers to the SNMPD module but that does not appear here, refer to "Messages Common to All Modules".


AUTHFAILURE, authentication failure from nnn.nnn.nnn.nnn
Severity:
Information
Explanation:
The SNMP daemon received an SNMP packet from the SNMP manager, but the packet contains the wrong community string, or access control is enabled and the specified host is not included in the list of approved hosts.
User Action:
Verify that the SNMP manager is sending the correct community string, and that the host is included in the appropriate access control list of approved hosts.

NORESOLVE, could not resolve address address

Severity:
Error
Explanation:
The SNMPD module has received an address that it cannot identify.
User Action:
Verify that the correct address has been specified.

OPDISABLED, requested operation is currently disabled

Severity:
Warning
Explanation:
A user has attempted to reset the terminal using ncdreset while the SNMP reset option is disabled.
User Action:
If the terminal should be enabled for remote reset via ncdreset, enable the SNMP reset option.


[Top] [Prev] [Next] [Contents] [Index]

Send comments, suggestions, or questions about this document to the NCD Technical Publications Department by Internet e-mail. Write to us at techpubs@ncd.com.
Copyright © 1997, NCD Inc. All rights reserved.