[Top] [Prev] [Next] [Contents] [Index]
TERM Messages
TERM messages pertain to the NCD Terminal Emulator (ncdterm). If you are looking for a message that refers to the TERM module but that does not appear here, refer to "Messages Common to All Modules".
BADCMD, unknown command line argument `command_option'
- Severity:
- Warning
- Explanation:
- The TERM module does not recognize the specified command-
line option.
- User Action:
- Refer to the ncdterm man page for a complete list of acceptable
command-line options for the NCD Terminal Emulator.
BADGC, Can't create a graphics context
- Severity:
- Fatal
- Explanation:
- The TERM module has insufficient memory to perform the
requested operation.
- User Action:
- Verify that the terminal has enough memory to perform the
operation. Close any unused local clients to free memory for the desired
function.
BADTABLE, Bad table at index `opcode' (opcode_name)
- Severity:
- Warning
- Explanation:
- The X server has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
COLORCEL, Error allocating necessary color cell
- Severity:
- Error
- Explanation:
- The NCD Terminal Emulator color table is full.
- User Action:
- Free colors so that the NCD Terminal Emulator can create a color
as requested.
CONNERR, Can't connect to host host
- Severity:
- Error
- Explanation:
- The TERM module cannot connect to the specified host as
requested.
- User Action:
- Verify that the hostname is entered correctly and that the
desired host is accessible via the network.
CONREAD, Error reading from the network connection
- Severity:
- Error
- Explanation:
- The TERM module has detected a problem with the network.
- User Action:
- Verify that the network is operational and that the terminal and
the host system are securely attached to the network.
CONWRITE, Error writing to the network connection
- Severity:
- Error
- Explanation:
- The TERM module has detected a problem with the network.
- User Action:
- Verify that the network is operational and that the terminal is
securely attached to the network.
DFLTFONT, No font font1, using default font2
- Severity:
- Warning
- Explanation:
- The desired font, font1, is not available; the TERM module is
using the default font, font2, instead.
- User Action:
- Verify that the desired font is in the user's font path and that it is
located in the correct directory, has read access, and is available via the
network. If the terminal is configured to obtain fonts from a font server, verify
that the font server is running and that it is accessible via the network.
DISPLAY, Can't open the display connection
- Severity:
- Fatal
- Explanation:
- The user has specified the incorrect display variable or the
display specified on the command line is incorrect.
- User Action:
- Verify that the correct display name is specified.
DSTRCORR, Object input buffer corrupted - internal error
- Severity:
- Error
- Explanation:
- Internal TERM memory is corrupted.
- User Action:
- Start the NCD Terminal Emulator a second time. If the situation
persists, please contact NCD Technical Support.
EIGNORE, End of DCS ignore download mode
- Severity:
- Error
- Explanation:
- When the TERM module received a request for downloaded
character sets, it entered the DCS ignore download mode. This message
signifies the end of that mode.
- User Action:
- If possible, use an alternate application that does not require
downloaded character sets.
FONTFAML, Font family is invalid - internal error
- Severity:
- Fatal
- Explanation:
- The TERM module has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
FONTINFO, Cannot find the information for font
- Severity:
- Fatal
- Explanation:
- The TERM module cannot find the desired or default font.
- User Action:
- Verify that the desired font is in the user's font path and that it is
located in the correct directory, has read access, and is available via the
network. If the terminal is configured to obtain fonts from a font server, verify
that the font server is running and is accessible via the network.
INETCONN, Can't initialize network connection
- Severity:
- Error
- Explanation:
- The TERM module has detected a problem with the network.
- User Action:
- Verify that the network is running and that the terminal is
securely attached to the network.
INTFACE, Can't create an interface button
- Severity:
- Fatal
- Explanation:
- The TERM module cannot create the desired interface feature,
specifically one or more of the interface buttons. This situation usually occurs
when the terminal is running low on memory.
- User Action:
- Verify that the terminal has sufficient memory to perform the
desired action. Close any unused local clients to free local memory.
LINECORR, Object line buffers corrupted - internal error
- Severity:
- Error
- Explanation:
- Internal TERM memory is corrupted.
- User Action:
- Start the NCD Terminal Emulator a second time. If the situation
persists, please contact NCD Technical Support.
LINERR, Lines are out of order - internal error
- Severity:
- Fatal
- Explanation:
- The TERM module has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
LOGDIR, Logfile directory is directory
- Severity:
- Information
- Explanation:
- The TERM module is using the specified directory for its logfile.
- User Action:
- None
LOGFILE, Can't open logfile for session
- Severity:
- Error
- Explanation:
- The TERM module cannot open a file for logging information
about the current NCD Terminal Emulator session.
- User Action:
- Verify that:
LOWMEM, Memory very low. Can't allocate selection buffer
- Severity:
- Warning
- Explanation:
- The X server is running low on memory and cannot allocate
enough memory for the selection buffer.
- User Action:
- Verify that the terminal has sufficient memory to perform the
desired action. Close any unused local clients to free local memory.
MENUBAR, Can't create the interface menubar
- Severity:
- Fatal
- Explanation:
- The TERM module cannot create the menu bar. This situation
usually occurs when the terminal is running low on memory.
- User Action:
- Verify that the terminal has sufficient memory to perform the
action. Close any unused local clients to free local memory.
MENUS, Can't create the interface menus
- Severity:
- Fatal
- Explanation:
- The TERM module cannot create the menus. This situation
usually occurs when the terminal is running low on memory.
- User Action:
- Verify that the terminal has sufficient memory to perform the
action. Close any unused local clients to free local memory.
MISSARG, Missing argument for `option'
- Severity:
- Warning
- Explanation:
- The specified command-line option does not include the
necessary argument.
- User Action:
- Re-enter the command with the necessary argument.
MLCONN, Can't initialize toolkit connection
- Severity:
- Fatal
- Explanation:
- The TERM module does not have sufficient memory to execute
properly.
- User Action:
- Verify that the terminal has sufficient memory. Close any
unused local clients to free local memory.
NETCONN, Can't create network connection
- Severity:
- Error
- Explanation:
- The TERM module has detected a problem with the network.
- User Action:
- Verify that the network is running and that the terminal is
securely attached to the network.
NOLOGDIR, Can't create log directory `directory'
- Severity:
- Warning
- Explanation:
- The TERM module cannot create the specified log directory as
requested.
- User Action:
- Confirm that the file service table contains an entry for the log
directory; this directory must be accessible via NFS. Verify that the directory
exists, is available to the network, and has the appropriate permissions.
NOLSTLOG, Can't create lastlog file `logfile_name' (error_number)
- Severity:
- Warning
- Explanation:
- The TERM module cannot create the specified log file as
requested.
- User Action:
- Confirm that the file service table contains an entry for the
directory in which the log file resides; this file must be accessible via NFS.
Verify that the file exists, is available via the network, and has the appropriate
permissions.
NOMEMRY, Can't allocate memory for needed structure
- Severity:
- Fatal
- Explanation:
- The TERM module does not have sufficient memory to perform
the desired action.
- User Action:
- Verify that the terminal has sufficient memory. Close any
unused local clients to free local memory.
OBJCORR, Object data has been corrupted - internal error
- Severity:
- Error
- Explanation:
- The TERM module has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
OPCODERR, Opcode lookup out of range - internal error
- Severity:
- Fatal
- Explanation:
- The TERM module has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
OPTABERR, Opcode table out of sequence - internal error
- Severity:
- Fatal
- Explanation:
- The TERM module has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
OPTERR, Can't combine telnet port and -display option
- Severity:
- Fatal
- Explanation:
- The command that has been entered specifies a TELNET port
and uses the -display command-line option. This is an invalid command.
- User Action:
- Re-enter the command, making sure that it specifies either a
TELNET port or the -display command-line option. Do not use both.
PARSEFONT, Couldn't parse font `font'
- Severity:
- Warning
- Explanation:
- The TERM module cannot interpret or identify the specified
font.
- User Action:
- Make sure the font specified is entered correctly and that it is
known to the X server.
PROCESS, Can't initialize the process
- Severity:
- Fatal
- Explanation:
- The TERM module does not have sufficient memory to perform
the desired action.
- User Action:
- Verify that the terminal has sufficient memory. Close any local
clients that are not being used to free local memory.
PROCTABERR, Process table corrupted - internal error
- Severity:
- Fatal
- Explanation:
- The X server has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
PRTINUSE, The printer is in use
- Severity:
- Information
- Explanation:
- The specified printer is currently in use.
- User Action:
- None
PRTOFFLN, Printer offline or not responding (message)
- Severity:
- Warning
- Explanation:
- The specified printer is offline or otherwise not responding to
the print request as specified in the message.
- User Action:
- Verify that the correct port is specified for the printer and that
printer resources are assigned correctly. For a printer attached to a serial port,
verify that the user has selected the correct print option.
REGIS, Regis graphics is not supported
- Severity:
- Error
- Explanation:
- The X server does not support ReGIS graphics.
- User Action:
- If possible, use an alternate application that does not require
ReGIS graphics.
SCRLBAR, Can't create the interface scrollbar
- Severity:
- Fatal
- Explanation:
- The TERM module cannot create the scroll bar. This situation
usually indicates that the terminal is running low on memory.
- User Action:
- Verify the terminal has sufficient memory to perform the action.
Close any unused local clients to free local memory.
SELECTER, Selection buffer overrun - internal error
- Severity:
- Error
- Explanation:
- The TERM module has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
SERIALERR, Internal error -- message
- Severity:
- Warning
- Explanation:
- The TERM module has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
SERIALINF, Switching to mode mode ...
- Severity:
- Information
- Explanation:
- The serial interface is communicating via XRemote or PPP as
requested.
- User Action:
- None
SESSION, Can't initialize the session
- Severity:
- Fatal
- Explanation:
- The TERM module cannot create an NCD Terminal Emulator
session. This occurs if the terminal is low on memory or if a network problem
exists.
- User Action:
- Verify there is sufficient memory for the terminal emulator. If
memory is low, close any unused clients to free local memory. If there is
sufficient memory, invoke the terminal emulator a second time. If the
situation persists, please contact NCD Technical Support.
SETADDR, Can't set the address for the network connection
- Severity:
- Error
- Explanation:
- The hostname entered in the terminal chooser does not exist or
the host cannot be accessed.
- User Action:
- Verify that the name of the desired host is spelled correctly and
that the network is operational.
SETTERM, Can't set the terminal for network connection
- Severity:
- Error
- Explanation:
- The TERM module has detected an error with the network.
- User Action:
- Verify that the network is running and that the terminal is
securely attached to the network.
SHELLPRC, Can't create connection subshell process
- Severity:
- Fatal
- Explanation:
- The TERM module does not have enough memory to perform
the desired action.
- User Action:
- Verify that the terminal has sufficient memory to perform the
desired action. Close any unused local clients to free local memory.
SIXEL, Sixel graphics is not supported
- Severity:
- Error
- Explanation:
- The X server does not support sixel graphics.
- User Action:
- If possible, use an alternate application that does not require
sixel graphics.
STARTLOG, Start logging to file
- Severity:
- Information
- Explanation:
- The TERM module is logging information to the specified file as
requested.
- User Action:
- None
STATUSLN, Can't create the interface status line
- Severity:
- Error
- Explanation:
- The TERM module cannot create the VT320 terminal emulator
status line. This usually occurs if the terminal is running low on memory.
- User Action:
- Verify that the terminal has sufficient memory to perform the
action. Close any unused local clients to free local memory.
STOPLOG, Stop logging to file
- Severity:
- Information
- Explanation:
- The TERM module has stopped logging information to the
specified file.
- User Action:
- None
SUBFONT, Specified substitute font not found
- Severity:
- Fatal
- Explanation:
- The TERM module cannot locate the desired substitute font.
- User Action:
- Make sure that the desired font resides in one of the directories
included in the terminal's current font path and that the file service table
contains an entry for the font directory.
TEL8ACT, Eight bit telnet mode is status
- Severity:
- Information
- Explanation:
- The TERM module has detected that eight-bit TELNET mode is
either enabled or not available as specified by the status.
- User Action:
- None
TEL8REQ, Requesting eight bit telnet connection (operating_system)
- Severity:
- Information
- Explanation:
- The TERM module is requesting an eight-bit TELNET connection
as requested.
- User Action:
- None
TELNTBIN, Set Telnet connection to binary mode
- Severity:
- Information
- Explanation:
- The TERM module's current connection is in binary mode.
- User Action:
- None
UNKWNFONT, Unknown font `font'
- Severity:
- Warning
- Explanation:
- The TERM module does not recognize the specified font.
- User Action:
- Make sure the font is entered correctly and that it is recognized
by the X server.
UNRECESC, Escape sequence unrecognized `escape_sequence'
- Severity:
- Warning
- Explanation:
- The TERM module has received the specified, unknown escape
sequence from an application.
- User Action:
- Verify that the application issues only recognized escape
sequences.
WINDOW, Can't create the interface window
- Severity:
- Fatal
- Explanation:
- The X server has insufficient memory to perform the desired
action.
- User Action:
- Verify that the terminal has sufficient memory. Close any
unused local clients to free local memory.
XLATESTR, Error with Translation Management
- Severity:
- Error
- Explanation:
- The TERM module has encountered an error in an X resource
translation string.
- User Action:
- Make sure that the terminal's TERM X resource translations use
the correct names, format, and syntax.
XLATETAB, Terminal lookup table corrupt - internal error
- Severity:
- Fatal
- Explanation:
- The TERM module has detected an internal error.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
[Top] [Prev] [Next] [Contents] [Index]
Send comments, suggestions, or questions about this document to the NCD Technical Publications Department by Internet e-mail. Write to us at
techpubs@ncd.com.
Copyright © 1997, NCD Inc. All rights
reserved.