[Top] [Prev] [Next] [Contents] [Index]
XSERVER Messages
XSERVER messages pertain to MIT X server code. If you are looking for a message that refers to the XSERVER module but does not appear here, refer to "Messages Common to All Modules".
AUDIOINITFAIL, unable to initialize Network Audio Server
- Severity:
- Error
- Explanation:
- The audio X server module was not loaded.
- User Action:
- Make sure the audio module is loaded.
BADAUTH, host host_address tried to connect with bad n authorization
- Severity:
- Warning
- Explanation:
- The X server received a request from an unauthorized client.
- User Action:
- Verify that the authorization level is correct for the client that is
attempting to connect.
BADFONTPATH, failed to set default font path font_path
- Severity:
- Error
- Explanation:
- The X server cannot set the specified font path as requested.
- User Action:
- Verify that the font path is set correctly and that the file service
table is configured appropriately. If the font path specifies a font server, make
sure that the entry uses the proper syntax and that the font server is accessible
via the network.
BADFONTPATHELEMENT, failed to add font_path_entry to font path
- Severity:
- Error
- Explanation:
- The X server cannot add the specified entry to the font path.
- User Action:
- Verify that the font path entry is typed correctly and that the file
service table is configured appropriately. If the entry is for a font server, make
sure the entry uses the proper syntax and that the font server is accessible via
the network.
BADWINDOWSIZE, window dimensions n n too large
- Severity:
- Error
- Explanation:
- The specified window dimensions are too large for the display.
- User Action:
- Specify the window size again, using appropriate dimensions.
CMDSRUNNING, n local commands are still running
- Severity:
- Warning
- Explanation:
- The X server has determined that clients are not disconnecting
as requested; the specified number of clients are hung processes.
- User Action:
- Stop the hung processes.
NEWCLIENT, host host connected with authorization_type authorization
- Severity:
- Information
- Explanation:
- The specified host has connected to the X server with the
specified type of authorization.
- User Action:
- None
NOCONSOLE, unable to find console window
- Severity:
- Error
- Explanation:
- The X server cannot display the Console window.
- User Action:
- Reboot the terminal. If the situation persists, please contact NCD
Technical Support.
NOEXTENSION, client attempted to use non-existent extension extension_name
- Severity:
- Warning
- Explanation:
- A client application is looking for the specified extension; the
extension is not provided by the current X server.
- User Action:
- Determine if another X server image available for the terminal
will provide the desired extension.
NOWARNING, unable to find warning box window
- Severity:
- Error
- Explanation:
- The X server cannot display the low-on-memory warning
window.
- User Action:
- Reboot the terminal. If the situation persists, please contact NCD
Technical Support.
RESET, resetting X server to defaults for new session
- Severity:
- Information
- Explanation:
- The X server is resetting its configuration information to its
default values as requested.
- User Action:
- None
[Top] [Prev] [Next] [Contents] [Index]
Send comments, suggestions, or questions about this document to the NCD Technical Publications Department by Internet e-mail. Write to us at
techpubs@ncd.com.
Copyright © 1997, NCD Inc. All rights
reserved.