DABC (Data Acquisition Backbone Core)
2.9.9
|
Base class for monitoring of slow control data. More...
#include <mbs/MonitorSlowControl.h>
Public Member Functions | |
MonitorSlowControl (const std::string &name, const std::string &prefix, dabc::Command cmd=nullptr) | |
virtual void | ProcessTimerEvent (unsigned timer) |
Method called by framework when timer event is produced. More... | |
virtual | ~MonitorSlowControl () |
![]() | |
virtual const char * | ClassName () const |
Returns class name of the object. More... | |
![]() | |
std::string | GetInfoParName () const |
![]() | |
bool | ActivateTimeout (double tmout_sec) |
Method used to produce timeout events in the worker. More... | |
Command | Assign (Command cmd) |
! Assign command with processor before command be submitted to other processor This produce ReplyCommand() call when command execution is finished Command itself returned if operation was successful, otherwise null() command More... | |
void | AssignAddon (WorkerAddon *addon) |
Assigns addon to the worker Should be called before worker assigned to the thread. More... | |
bool | AssignToThread (ThreadRef thrd, bool sync=true) |
Assign worker to thread, worker becomes active immediately. More... | |
bool | CanSubmitCommand () const |
Returns true if command can be submitted to worker. More... | |
RecordField | Cfg (const std::string &name, Command cmd=nullptr) const |
Returns configuration field of specified name Configuration value of specified name searched in following places: More... | |
bool | DettachFromThread () |
Detach worker from the thread, later worker can be assigned to some other thread Method especially useful to normally finish object recursion (if it possible). More... | |
bool | Execute (Command cmd, double tmout=-1.) |
Execute command in the processor. More... | |
bool | Execute (const std::string &cmd, double tmout=-1.) |
bool | HasThread () const |
Indicates if pointer on thread is not zero; thread-safe. More... | |
bool | IsOwnThread () const |
Returns true if called from thread. More... | |
bool | MakeThreadForWorker (const std::string &thrdname="") |
Creates appropriate thread for worker and assign worker to the thread. More... | |
Parameter | Par (const std::string &name) const |
Returns reference on worker parameter object. More... | |
virtual std::string | RequiredThrdClass () const |
Method returns name of required thread class for processor. More... | |
void | SetWorkerPriority (int nq) |
bool | Submit (Command cmd) |
Submit command for execution in the processor. More... | |
ThreadRef | thread () |
Return reference on the worker thread; thread-safe. More... | |
std::string | ThreadName () const |
Returns name of the worker thread; thread-safe More... | |
Worker (Reference parent, const std::string &name) | |
std::string | WorkerAddress (bool full=true) |
Return address, which can be used to submit command to the worker If full specified, command can be submitted from any node, which has connection to this node. More... | |
uint32_t | WorkerId () const |
int | WorkerPriority () const |
virtual | ~Worker () |
![]() | |
bool | AddChild (Object *child, bool withmutex=true) throw () |
Add object to list of child objects, thread safe More... | |
bool | AddChildAt (Object *child, unsigned pos, bool withmutex=true) |
Add object to list of child objects at specified position. More... | |
Object * | FindChild (const char *name) const |
returns pointer on child object with given name More... | |
Reference | FindChildRef (const char *name, bool force=false) const throw () |
returns reference on child object with given name More... | |
bool | GetAllChildRef (ReferencesVector *vect) const |
Object * | GetChild (unsigned n) const |
returns pointer on child object More... | |
Reference | GetChildRef (unsigned n) const |
returns reference on child object More... | |
Reference | GetFolder (const std::string &name, bool force=false) throw () |
Return folder of specified name, no special symbols allowed. More... | |
const char * | GetName () const |
Returns name of the object, thread safe More... | |
Object * | GetParent () const |
Returns pointer on parent object, thread safe More... | |
Reference | GetParentRef () const |
bool | IsChildsHidden () const |
Return true if object wants to hide childs from hierarchy scan, thread safe More... | |
bool | IsHidden () const |
Return true if object wants to be hidden from hierarchy scan, thread safe More... | |
bool | IsLogging () const |
Return true if object selected for logging, thread safe More... | |
bool | IsName (const char *str) const |
Checks if object name is same as provided string, thread safe More... | |
bool | IsName (const char *str, int len) const |
Checks if object name is same as provided, thread safe More... | |
bool | IsName (const std::string &str) const |
Checks if object name is same as provided string, thread safe More... | |
bool | IsNameMatch (const std::string &mask) const |
Check if object name match to the mask. More... | |
bool | IsOwner () const |
Returns true if object is owner of its children, thread safe More... | |
bool | IsParent (Object *obj) const |
Checks if specified argument is in the list of object parents. More... | |
bool | IsTopXmlLevel () const |
Return true if object should be searched in the top level of the xml file, thread safe More... | |
std::string | ItemName (bool compact=true) const |
Produce string, which can be used as name argument in dabc::mgr.FindItem(name) call. More... | |
unsigned | NumChilds () const |
returns number of child objects More... | |
Object (const std::string &name, unsigned flags=flIsOwner) | |
Resolve problem with child-parent mutex locking. More... | |
Object (Reference parent, const std::string &name, unsigned flags=flIsOwner) | |
virtual void | Print (int lvl=0) |
Print object content on debug output. More... | |
bool | RemoveChild (Object *child, bool cleanup=true) throw () |
Detach child from parent object If cleanup==true and parent is owner of child, child will be destroyed. More... | |
bool | RemoveChildAt (unsigned n, bool cleanup=true) throw () |
Detach child object from parent at specified position If cleanup==true and object is owner of child, child will be destroyed. More... | |
bool | RemoveChilds (bool cleanup=true) |
Remove all childs. More... | |
void | SetLogging (bool on=true) |
Sets logging flag, thread safe More... | |
virtual | ~Object () |
Protected Member Functions | |
virtual unsigned | GetNextEventNumber () |
virtual unsigned | GetNextEventTime () |
virtual unsigned | GetRecRawSize () |
void | SendDataToOutputs () |
virtual unsigned | WriteRecRawData (void *ptr, unsigned maxsize) |
![]() | |
void | ActivateInput (unsigned port=0) |
Produces event for specified input port Should be used when processing was stopped due to return false in ProcessRecv method. More... | |
void | ActivateOutput (unsigned port=0) |
Produces event for specified output port. More... | |
void | ActivatePool (unsigned pool) |
Produces event for specified pool handle. More... | |
bool | CanRecv (unsigned indx=0) const |
Method return true if recv from specified port can be done. More... | |
bool | CanSend (unsigned indx=0) const |
Method return true if send over specified port can be done. More... | |
bool | CanTakeBuffer (unsigned pool=0) |
Returns true if memory pool can provide buffer. More... | |
ModuleAsync (const std::string &name, Command cmd=nullptr) | |
Constructor of ModuleAsync class. More... | |
unsigned | NumCanRecv (unsigned indx=0) const |
Method return number of buffers which can be received via the port. More... | |
unsigned | NumCanSend (unsigned indx=0) const |
Method return number of send operation can be done for specified port. More... | |
unsigned | NumCanTake (unsigned pool=0) const |
Method return number of buffers which could be taken from data queue assigned with the pool. More... | |
Buffer | PoolQueueItem (unsigned pool=0, unsigned nbuf=0) |
Returns buffer from queue assigned with the pool. More... | |
virtual bool | ProcessBuffer (unsigned pool=0) |
Method called by framework when at least one buffer available in pool handle. More... | |
virtual void | ProcessConnectEvent (const std::string &name, bool on) |
Method called by framework when connection state of the item is changed. More... | |
virtual void | ProcessInputEvent (unsigned port) |
Method called by framework when input event is produced. More... | |
virtual void | ProcessOutputEvent (unsigned port) |
Method called by framework when output event is produced. More... | |
virtual void | ProcessPoolEvent (unsigned pool) |
Method called by framework when pool event is produced. More... | |
virtual bool | ProcessRecv (unsigned port=0) |
Method called by framework when at least one buffer available in input port. More... | |
virtual bool | ProcessSend (unsigned port=0) |
Method called by framework when at least one buffer can be send to output port. More... | |
virtual void | ProcessUserEvent (unsigned item) |
Method called by framework when custom user event is produced. More... | |
Buffer | Recv (unsigned indx=0) |
Methods receives buffers from the port. More... | |
bool | RecvQueueFull (unsigned port=0) |
Returns true if receive queue is full and block input. More... | |
Buffer | RecvQueueItem (unsigned port=0, unsigned nbuf=0) |
Returns buffer from receive queue of the input port. More... | |
bool | Send (Buffer &buf) |
Send buffer over first output port. More... | |
bool | Send (unsigned indx, Buffer &buf) |
Methods to send buffer via specified output port. More... | |
void | SignalRecvWhenFull (unsigned port=0) |
Let input signal only when queue is full. More... | |
bool | SkipInputBuffers (unsigned indx=0, unsigned nbuf=1) |
Remove items in input queue. More... | |
Buffer | TakeBuffer (unsigned pool=0) |
Take buffer from memory pool. More... | |
BufferSize_t | TotalSizeCanRecv (unsigned indx=0) const |
Method return total size of buffers can be received via the port. More... | |
virtual | ~ModuleAsync () |
Destructor of ModuleAsync class. More... | |
![]() | |
virtual void | AfterModuleStop () |
virtual void | BeforeModuleStart () |
bool | BindPorts (const std::string &inpname, const std::string &outname) |
Bind input and output ports that both will share same connection. More... | |
virtual void | BuildFieldsMap (RecordFieldsMap *cont) |
Fill fields map, which is relevant for the object Objects hierarchy produced from dabc::Manager. More... | |
bool | CanSendToAllOutputs (bool exclude_disconnected=true) const |
EventId | ConstructUserItemEvent (unsigned indx=0) |
unsigned | CreateInput (const std::string &name, unsigned queue=10) |
unsigned | CreateOutput (const std::string &name, unsigned queue=10) |
virtual Parameter | CreatePar (const std::string &name, const std::string &kind="") |
unsigned | CreatePoolHandle (const std::string &poolname, unsigned queue=10) |
Creates handle for memory pool, which preserves reference on memory pool and provides fast access to memory pool functionality. More... | |
unsigned | CreateTimer (const std::string &name, double period_sec=-1., bool synchron=false) |
unsigned | CreateUserItem (const std::string &name) |
void | DisconnectAllPorts (bool witherr=false) |
Method disconnects all module ports, should be called only from Module thread. More... | |
bool | DisconnectPort (const std::string &name, bool witherr=false) |
Disconnect port from transport. More... | |
virtual bool | DoStop () |
void | EnsurePorts (unsigned numinp=0, unsigned numout=0, const std::string &poolname="") |
Method ensure that at least specified number of input and output ports will be created. More... | |
virtual int | ExecuteCommand (Command cmd) |
Main method where commands are executed. More... | |
virtual bool | Find (ConfigIO &cfg) |
Method to locate object in xml file. More... | |
unsigned | FindInput (const std::string &name) const |
unsigned | FindOutput (const std::string &name) const |
unsigned | FindPool (const std::string &name) const |
PortRef | FindPort (const std::string &name) const |
unsigned | FindTimer (const std::string &name) |
unsigned | FindUserItem (const std::string &name) |
ModuleItem * | GetItem (unsigned id) const |
std::string | InputName (unsigned indx=0, bool fullname=false) const |
unsigned | InputQueueCapacity (unsigned indx=0) const |
bool | InputQueueFull (unsigned indx=0) const |
bool | IsAutoPool (unsigned indx=0) const |
Returns true when handle automatically delivers buffers via the connection. More... | |
bool | IsInputConnected (unsigned indx=0) const |
bool | IsOutputConnected (unsigned indx=0) const |
bool | IsPoolConnected (unsigned indx=0) const |
bool | IsPortConnected (const std::string &name) const |
bool | IsRunning () const |
Returns true if module if running. More... | |
bool | IsValidInput (unsigned indx=0) const |
bool | IsValidOutput (unsigned indx=0) const |
bool | IsValidPool (unsigned indx=0) const |
bool | IsValidTimer (unsigned indx) const |
bool | IsValidUserItem (unsigned indx) const |
virtual void | ModuleCleanup () |
Method, which can be reimplemented by user and should cleanup all references on buffers and other objects. More... | |
unsigned | NumInputs () const |
unsigned | NumOutputs () const |
unsigned | NumPools () const |
unsigned | NumTimers () const |
virtual void | ObjectCleanup () |
Inherited method, called during module destroy. More... | |
virtual void | OnThreadAssigned () |
std::string | OutputName (unsigned indx=0, bool fullname=false) const |
unsigned | OutputQueueCapacity (unsigned indx=0) const |
std::string | PoolName (unsigned indx=0, bool fullname=false) const |
unsigned | PortQueueCapacity (const std::string &name) const |
virtual int | PreviewCommand (Command cmd) |
This method called before command will be executed. More... | |
virtual void | ProcessConnectionActivated (const std::string &name, bool on) |
virtual void | ProcessEvent (const EventId &) |
virtual double | ProcessTimeout (double last_diff) |
void | ProduceInputEvent (unsigned indx=0, unsigned cnt=1) |
void | ProduceOutputEvent (unsigned indx=0, unsigned cnt=1) |
void | ProducePoolEvent (unsigned indx=0, unsigned cnt=1) |
void | ProduceUserItemEvent (unsigned indx=0, unsigned cnt=1) |
virtual bool | ReplyCommand (Command cmd) |
Reimplement this method to react on command reply Return true if command can be destroyed by framework. More... | |
void | SendToAllOutputs (Buffer &buf) |
void | SetAutoStop (bool on=true) |
If set, module will be automatically stopped when all i/o ports are disconnected. More... | |
void | SetInfoParName (const std::string &name) |
virtual void | SetModulePriority (int pri=-1) |
bool | SetPortLoopLength (const std::string &name, unsigned cnt) |
bool | SetPortRatemeter (const std::string &name, const Parameter &ref) |
bool | SetPortSignaling (const std::string &name, Port::EventsProducing signal) |
void | ShootTimer (const std::string &name, double delay_sec=0.) |
void | ShootTimer (unsigned indx, double delay_sec=0.) |
bool | Start () |
Starts execution of the module code. More... | |
bool | Stop () |
Stops execution of the module code. More... | |
bool | SubmitCommandToTransport (const std::string &portname, Command cmd) |
Submits command to transport, assigned with the port. More... | |
std::string | TimerName (unsigned n=0, bool fullname=false) const |
std::string | UserItemName (unsigned indx=0, bool fullname=false) const |
![]() | |
bool | _FireDoNothingEvent () |
bool | _FireEvent (uint16_t evid) |
bool | _FireEvent (uint16_t evid, uint32_t arg, int pri=-1) |
bool | _IsFireEvent () const |
bool | ActivateMainLoop () |
virtual void | BeforeHierarchyScan (Hierarchy &h) |
Method called before publisher makes next snapshot of hierarchy. More... | |
void | CancelCommands () |
void | CleanupPublisher (bool sync=true) |
Release reference on publisher and unsubscribe/unpublish all registered entries. More... | |
CommandDefinition | CreateCmdDef (const std::string &name) |
virtual bool | DestroyByOwnThread () |
Inherited method from Object, invoked at the moment when worker requested to be destroyed by its thread. More... | |
bool | DestroyPar (const std::string &name) |
Method must be used if worker wants to destroy parameter. More... | |
virtual void | DoWorkerAfterMainLoop () |
Internal - function executed after leaving main loop. More... | |
virtual void | DoWorkerMainLoop () |
Internal - entrance function for main loop execution. More... | |
bool | ExecuteIn (Worker *dest, Command cmd) |
Executes command in specified worker. More... | |
bool | FireEvent (uint16_t evid) |
bool | FireEvent (uint16_t evid, uint32_t arg, int pri=-1) |
Reference | GetPublisher () |
Return reference on publisher. More... | |
bool | IsWorkerActive () const |
Method indicates if worker is running in the thread and accepts normal events. More... | |
virtual void | ObjectDestroyed (Object *) |
Method to clear object reference, will be called from thread context (when possible) More... | |
virtual void | ProcessParameterEvent (const ParameterEvent &evnt) |
Interface method to retrieve subscribed parameter events. More... | |
virtual bool | Publish (const Hierarchy &h, const std::string &path) |
virtual bool | PublishPars (const std::string &path) |
bool | RegisterForParameterEvent (const std::string &mask, bool onlychangeevent=true) |
Subscribe to parameter events from local or remote node. More... | |
void | SetParValue (const std::string &name, const RecordField &v) |
Set parameter value and sync with worker hierarchy. More... | |
void | SetWorkerCfgId (int id=-1) |
Set identifier which can be used in XML configuration ${}# formula It means that correspondent to the ID element of array will be extracted. More... | |
bool | SingleLoop (double tmout) |
virtual bool | Subscribe (const std::string &path) |
virtual bool | Unpublish (const Hierarchy &h, const std::string &path) |
bool | UnregisterForParameterEvent (const std::string &mask) |
Unsubscribe to parameter events from local or remote node. More... | |
virtual bool | Unsubscribe (const std::string &path) |
Worker (const ConstructorPair &pair) | |
Special constructor, designed for inherited classes. More... | |
void | WorkerSleep (double tmout) |
![]() | |
virtual void | _ChildsChanged () |
Method called when new childs are add or old are removed. More... | |
virtual bool | _DoDeleteItself () |
This method is called at the moment when DecReference think that object can be destroyed and wants to return true. More... | |
bool | _IsNormalState () |
Same as IsNormalState() but without mutex lock - user should lock mutex himself. More... | |
virtual Object * | CreateInstance (const std::string &name) |
Method used to create new item to be placed as child of the object. More... | |
void | DeleteThis () |
Method should be used by the object to delete itself. More... | |
bool | DestroyCalledFromOwnThread () |
Internal DABC method, should be called by thread which was requested to destroy object. More... | |
void | FillFullName (std::string &fullname, Object *upto, bool exclude_top_parent=false) const |
Method used to produce full item name,. More... | |
bool | GetFlag (unsigned fl) const |
Return value of selected flag, not thread safe More... | |
bool | IsNormalState () |
Return true if object is in normal state. More... | |
unsigned | NumReferences () |
Return number of references on the object. More... | |
Object (const ConstructorPair &pair, unsigned flags=flIsOwner) | |
Mutex * | ObjectMutex () const |
Returns mutex, used for protection of Object data members. More... | |
void | SetAutoDestroy (bool on=true) |
Set autodestroy flag for the object Once enabled, object will be destroyed when last reference will be cleared. More... | |
void | SetFlag (unsigned fl, bool on=true) |
Change value of selected flag, not thread safe More... | |
void | SetName (const char *name) |
Changes object name. More... | |
void | SetNameDirect (const char *name) |
Changes object name disregard of existing references. More... | |
void | SetOwner (bool on=true) |
Specifies if object will be owner of its new childs. More... | |
Protected Attributes | |
bool | fDoRec |
when true, record should be filled More... | |
unsigned | fEventNumber |
Event number, written to MBS event. More... | |
double | fFlushTime |
time to flush event More... | |
mbs::WriteIterator | fIter |
iterator for creating of MBS events More... | |
dabc::TimeStamp | fLastSendTime |
last time when buffer was send, used for flushing More... | |
mbs::SlowControlData | fRec |
record used to store selected variables More... | |
unsigned | fSubeventId |
full id number for subevent More... | |
![]() | |
bool | fAutoStop |
module will automatically stop when all i/o ports will be disconnected More... | |
dabc::Reference | fDfltPool |
direct reference on memory pool, used when no pool handles are not created More... | |
std::string | fInfoParName |
full name of parameter, used as info More... | |
std::vector< InputPort * > | fInputs |
array of input ports More... | |
std::vector< ModuleItem * > | fItems |
map for fast search of module items More... | |
std::vector< OutputPort * > | fOutputs |
array of output ports More... | |
std::vector< PoolHandle * > | fPools |
array of pools More... | |
std::string | fPublishPars |
path where module pars will be published More... | |
bool | fRunState |
true if module in the running state More... | |
unsigned | fSysTimerIndex |
index of timer, which will be used with module itself More... | |
std::vector< Timer * > | fTimers |
array of timers More... | |
std::vector< ModuleItem * > | fUsers |
array of user items More... | |
![]() | |
WorkerAddonRef | fAddon |
extension of worker for some special events More... | |
Reference | fPublisher |
reference on publisher, once found, remain until end of object live More... | |
ThreadRef | fThread |
reference on the thread, once assigned remain whole time More... | |
Mutex * | fThreadMutex |
pointer on main thread mutex More... | |
bool | fWorkerActive |
indicates if worker can submit events to the thread More... | |
int | fWorkerCfgId |
special ID, can be used in XML configuration in ${}# formula More... | |
CommandsQueue | fWorkerCommands |
all kinds of commands, processed by the worker More... | |
int | fWorkerCommandsLevel |
Number of process commands recursion. More... | |
unsigned | fWorkerFiredEvents |
indicate current balance between fired and processed events, used to correctly halt worker More... | |
Hierarchy | fWorkerHierarchy |
place for publishing of worker parameters More... | |
uint32_t | fWorkerId |
worker id in thread list, used for events submit More... | |
int | fWorkerPriority |
priority of events, submitted by worker to the thread More... | |
![]() | |
int | fObjectBlock |
counter for blocking calls, as long as non-zero, non of child can be removed More... | |
ReferencesVector * | fObjectChilds |
list of the child objects More... | |
unsigned | fObjectFlags |
flag, protected by the mutex More... | |
Mutex * | fObjectMutex |
mutex protects all private property of the object More... | |
std::string | fObjectName |
object name More... | |
Reference | fObjectParent |
reference on the parent object More... | |
int | fObjectRefCnt |
accounts how many references existing on the object, thread safe More... | |
Additional Inherited Members | |
![]() | |
enum | EPriotiryLevels { priorityMaximum = 0 , priorityMinimum = -1 , priorityDefault = -7 , priorityMagic = -77 } |
enum | EWorkerEventsCodes { evntFirstCore = 1 , evntFirstAddOn = 100 , evntFirstSystem = 200 , evntFirstUser = 1000 } |
![]() | |
static int | cmd_bool (bool v) |
![]() | |
static void | Destroy (Object *obj) throw () |
User method for object destroyment. More... | |
static void | InspectGarbageCollector () |
\ brief Methods to inspect how many objects pointers are remained More... | |
static bool | NameMatch (const std::string &name, const std::string &mask) |
Check if name matches to specified mask. More... | |
static bool | NameMatchM (const std::string &name, const std::string &mask) |
Check if name matches to specified mask. More... | |
static unsigned | NumInstances () |
Static variable counts total number of objects instances. More... | |
![]() | |
enum | EFlags { flStateMask = 0x000f , flIsOwner = 0x0010 , flCleanup = 0x0020 , flHasThread = 0x0040 , flAutoDestroy = 0x0080 , flLogging = 0x0100 , flNoMutex = 0x0200 , flHidden = 0x0400 , flChildsHidden = 0x0800 , flTopXmlLevel = 0x1000 } |
![]() | |
static ConstructorPair | MakePair (const std::string &fullname, bool withmanager=true) |
Internal DABC method, used to produce pair - object parent and object name, which is typically should be used as argument in class constructor. More... | |
static ConstructorPair | MakePair (Object *prnt, const std::string &fullname, bool withmanager=true) |
Internal DABC method, used to produce pair - object parent and object name, which is typically should be used as argument in class constructor. More... | |
static ConstructorPair | MakePair (Reference prnt, const std::string &fullname, bool withmanager=true) |
Internal DABC method, used to produce pair - object parent and object name, which is typically should be used as argument in class constructor. More... | |
Base class for monitoring of slow control data.
It delivers collected slow-control data to output
Definition at line 39 of file MonitorSlowControl.h.
mbs::MonitorSlowControl::MonitorSlowControl | ( | const std::string & | name, |
const std::string & | prefix, | ||
dabc::Command | cmd = nullptr |
||
) |
Definition at line 21 of file MonitorSlowControl.cxx.
|
virtual |
Definition at line 42 of file MonitorSlowControl.cxx.
|
protected |
Definition at line 58 of file MonitorSlowControl.cxx.
|
inlineprotectedvirtual |
Reimplemented in fesa::Monitor, ezca::Monitor, and dim::Monitor.
Definition at line 51 of file MonitorSlowControl.h.
|
inlineprotectedvirtual |
Definition at line 52 of file MonitorSlowControl.h.
|
protectedvirtual |
Definition at line 52 of file MonitorSlowControl.cxx.
|
inlineprotectedvirtual |
Reimplemented in mbs::Monitor, and fesa::Monitor.
Definition at line 54 of file MonitorSlowControl.h.
|
virtual |
Method called by framework when timer event is produced.
Can be reimplemented by the user.
Reimplemented from dabc::ModuleAsync.
Reimplemented in mbs::Monitor, ezca::Monitor, and dim::Monitor.
Definition at line 46 of file MonitorSlowControl.cxx.
|
protected |
record used to store selected variables
Definition at line 41 of file MonitorSlowControl.h.
|
protected |
when true, record should be filled
Definition at line 42 of file MonitorSlowControl.h.
|
protected |
full id number for subevent
Definition at line 43 of file MonitorSlowControl.h.
|
protected |
Event number, written to MBS event.
Definition at line 44 of file MonitorSlowControl.h.
|
protected |
last time when buffer was send, used for flushing
Definition at line 45 of file MonitorSlowControl.h.
|
protected |
iterator for creating of MBS events
Definition at line 46 of file MonitorSlowControl.h.
|
protected |
time to flush event
Definition at line 47 of file MonitorSlowControl.h.